ABSTRACT
Triboelectric nanogenerator (TENG) is becoming a sustainable and renewable way of energy harvesting and self-powered sensing because of low cost, simple structure, and high efficiency. However, the output current of existing TENGs is still low. It is proposed that the output current of TENGs can be dramatically improved if the triboelectric charges can distribute inside the triboelectric layers. Herein, a novel single-electrode conductive network-based TENG (CN-TENG) is developed by introducing a conductive network of multiwalled carbon nanotubes in dielectric triboelectric layer of thermoplastic polyurethane (TPU). In this CN-TENG, the contact electrification-induced charges distribute on both the surface and interior of the dielectric TPU layer. Thus, the short-circuit current of CN-TENG improves for 100-fold, compared with that of traditional dielectric TENG. In addition, this CN-TENG, even without packing, can work stably in high-humidity environments and even in the rain, which is another main challenge for conventional TENGs due to charge leakage. Further, this CN-TENG is applied for the first time, to successfully distinguish conductive and dielectric materials. This work provides a new and effective strategy to fabricate TENGs with high output current and humidity-resistivity, greatly expanding their practical applications in energy harvesting, movement sensing, human-machine interaction, and so on.
ABSTRACT
Real-time chemical and biological sensing in vitro is important for application in health and environmental monitoring. Thus, a more rapid and stable detection method is urgently needed. Herein, an immediate-stable real-time fluorescent immunosensor with a high response speed (â¼100%, <1 s) and approximately zero steady-state error is constructed. The developed sensor is based on the MnO4--triggered in situ immediate-stable fluorogenic reaction between dopamine and orcinol monohydrate to produce azamonardine (DMTM). The obtained DMTM is identified and characterized by high-resolution mass spectrometry, 1H NMR spectroscopy, 13C NMR spectroscopy, and theoretical calculations. The present sensor achieves a highly sensitive detection of dopamine (DA) with a limit of detection (LOD) of 10 nM as well as alkaline phosphates (ALP) with an LOD of 0.1 mU/mL by using orcinol monohydrate phosphate sodium salt as a substrate. As a proof of concept, ALP-triggered fluorescence ELISA using cardiac troponin I (cTnI) as a model antigen target is further constructed. The developed real-time sensor achieves the detection of cTnI with an LOD of 0.05 ng/mL. Moreover, the sensor proposed by us is successfully applied to assess the cTnI level in clinical serum specimens and yields results consistent with those obtained by the commercial ELISA method. The immediate-stable real-time fluorescence immunosensor provides a promising and powerful platform for the trace detection of biomolecules in clinical diagnosis.
Subject(s)
Biosensing Techniques , Biosensing Techniques/methods , Dopamine , Immunoassay/methods , Limit of Detection , Reaction TimeABSTRACT
The emergence of plastic electronics satisfies the increasing demand for flexible electronics. However, it has caused severe ecological problems. Flexible electronics based on natural materials are increasing to hopefully realize the "green" and eco-friendly concept. Herein, recent advances in the design and fabrication of green flexible electronics are reviewed. First, this review comprehensively introduces various natural materials and derivatives, focusing particularly on fibroin and silk, wood and paper, plants, and biomass. Second, fabrication techniques for modifying natural materials, including physical and chemical methods, are presented, after which their merits and demerits are thoroughly discussed. Green flexible electronics based on natural materials, comprising electrical wires/electrodes, antennas, thermal management devices, transistors, memristors, sensors, energy-harvesting devices, energy-storage devices, displays, actuators, electromagnetic shielding, and integration systems, are described in detail. Finally, perspectives on the existing challenges and opportunities to employ natural materials in green flexible electronics are presented.
Subject(s)
Fibroins , Wearable Electronic Devices , Electronics/methods , Electrodes , SilkABSTRACT
Triboelectric nanogenerators (TENGs) can covert mechanical energy into electricity in a clean and sustainable manner. However, traditional TENGs are mainly limited by the low output current, and thus their practical applications are still limited. Herein, a new type of TENG is developed by using conductive materials as the triboelectric layers and electrodes simultaneously. Because of the matched density of states between the two triboelectric layers, this simply structured device reaches an open-circuit voltage of 1400 V and an ultrahigh current density of 1333 mA m-2 when poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film and copper (Cu) or aluminum (Al) foil are used as the triboelectric pair. The current density increases by nearly three orders of magnitude compared with traditional TENGs. More importantly, this device can work stably in high-humidity environments, which is always a big challenge for traditional TENGs. Surprisingly, this TENG can even perform well in the presence of water droplets. This work provides a new and effective strategy for constructing high-performance TENGs, which can be used in many practical applications in the near future.
ABSTRACT
Organic electrochemical transistors (OECTs), particularly the ones based on PEDOT:PSS, are excellent candidates for chemical and biological sensing because of their unique advantages. Improving the sensitivity and stability of OECTs is crucially important for practical applications. Herein, the transconductance of OECT is improved by 8-fold to 14.9 mS by doping the PEDOT:PSS channel with plasmonic gold nanoparticles (AuNPs) using a solution-based process followed by photo annealing. In addition, the OECT also possesses high flexibility and cyclic stability. It is revealed that the doping of AuNPs increases the conductivity of PEDOT:PSS and the photo annealing improves the crystallinity of the PEDOT:PSS channel and the interaction between AuNPs and PEDOT:PSS. These changes lead to the increase in transconductance and cyclic stability. The prepared OECTs are also demonstrated to be effective in sensitive detection of glucose within a wide concentration range of 10 nM-1 mM. Our OECTs based on photo-annealed plasmonic AuNP-doped PEDOT:PSS may find great applications in chemical and biological sensing, and this strategy may be extended to prepare many other high-performance OECT-based devices.
ABSTRACT
Flexible electronics is an emerging field of research involving multiple disciplines, which include but not limited to physics, chemistry, materials science, electronic engineering, and biology. However, the broad applications of flexible electronics are still restricted due to several limitations, including high Young's modulus, poor biocompatibility, and poor responsiveness. Innovative materials aiming for overcoming these drawbacks and boost its practical application is highly desirable. Hydrogel is a class of 3D crosslinked hydrated polymer networks, and its exceptional material properties render it as a promising candidate for the next generation of flexible electronics. Here, the latest methods of synthesizing advanced functional hydrogels and the state-of-art applications of hydrogel-based flexible electronics in various fields are reviewed. More importantly, the correlation between properties of the hydrogel and device performance is discussed here, to have better understanding of the development of flexible electronics by using environmentally responsive hydrogels. Last, perspectives on the current challenges and future directions in the development of hydrogel-based multifunctional flexible electronics are provided.
ABSTRACT
Yuan Cheng, Zibiao Li, Junfeng Gao, Hai-Dong Yu and Gang Zhang introduce this themed collection on flexible nanomaterials.
ABSTRACT
There has been increasing exploration of the development and production of biodegradable polymers in response to issues with petrol-based polymers and their impact on the environment. Here we report a new approach to synthesize a natural nanogel from lignin and nanocellulose. First, lignin nanobeads were synthesized by a solvent-shifting method, which showed a spherical shape with a diameter of 159.7â nm. Then the lignin nanobeads were incorporated into a nanocellulose network to form the lignin/cellulose nanogels. The nanocellulose fibrils (CNF-C) nanogels reveal a higher storage modulus than the nanocellulose crystal (CNC-C) ones due to the denser network with self-entanglement of longer cellulose chains. The presence of lignin nanobeads in the nanogels helped to increase the viscoelasticity of the nanogels. This work highlights that the new kinds of green nanogels could be potentially utilized in a variety of biomedical applications such as drug delivery and wound dressing.
Subject(s)
Cellulose , Lignin , Lignin/chemistry , Cellulose/chemistry , Nanogels , Drug Delivery Systems , PolymersABSTRACT
In situ analysis of sweat provides a simple, convenient, cost-effective, and noninvasive approach for the early diagnosis of physical illness in humans and is particularly useful in family care. In this study, a flexible and skin-attachable colorimetric sweat sensor for multiplexed analysis is developed using a simple, cost-effective, and convenient method. The obtained sweat sensor can be used to simultaneously detect glucose, lactate, urea, and pH value in sweat, as well as sweat loss and skin temperature. Only 2.5 µL of sweat is enough for the whole test, and the sweat loss and chemical-sensing results can be read out conveniently by naked eyes or a smartphone. In addition, body temperature can also be detected with an additional electrical circuit. Our sweat sensor provides a new, cost-effective, and convenient approach for in vitro diagnosis of multiple components in sweat, and the easy fabrication and cost-effectiveness make our sensor commercializable in the near future.
Subject(s)
Colorimetry , Sweat , Colorimetry/methods , Glucose , Humans , Skin , SmartphoneABSTRACT
Organic electrochemical transistors (OECTs), especially the ones with high transconductance, are highly promising in sensitive detection of chemical and biological species. However, it is still a great challenge to design and fabricate OECTs with very high transconductance. Herein, an OECT with ultrahigh transconductance is reported by introducing ionic liquid and dodecylbenzenesulfonate (DBSA) simultaneously in poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) as the semiconductive channel. Compared with the OECT based on pristine PEDOT:PSS, the OECT based on co-doped PEDOT:PSS demonstrates a significant enhancement of transconductance from 1.85 to 22.7 mS, because of the increase in volumetric capacitance and conductivity. The enhanced transconductance is attributed to the DBSA-facilitated phase separation between the ionic liquid and PEDOT:PSS, which helps to form conductive domains of ionic liquid in PEDOT:PSS matrix, and the partial dispersion of ionic liquid in the PEDOT:PSS phase. Furthermore, by using the interdigitated electrodes as the source and drain electrodes, an ultrahigh transconductance of 180 mS is obtained, which is superior to that of the state-of-the-art OECTs. Because of the ultrahigh transconductance, the obtained OECT demonstrates sensitive detection of hydrogen peroxide and glucose, making it promising in clinical diagnosis, health monitoring, and environmental surveillance.
Subject(s)
Ionic Liquids , Bridged Bicyclo Compounds, Heterocyclic/chemistry , Electrodes , Polymers/chemistryABSTRACT
Partridge tea (Mallotus oblongifolius (Miq.) Müll.Arg.) is a local characteristic tea in Hainan, the southernmost province of China, and the quality of partridge tea may be affected by the producing areas. In this study, stable isotope and targeted metabolomics combined chemometrics were used as potential tools for analyzing and identifying partridge tea from different origins. Elemental analysis-stable isotope ratio mass spectrometer and liquid chromatography-tandem mass spectrometrywas used to analyze the characteristics of C/N/O/H stable isotopes and 54 chemical components, including polyphenols and alkaloids in partridge tea samples from four regions in Hainan (Wanning, Wenchang, Sanya and Baoting). The results showed that there were significant differences in the stable isotope ratios and polyphenol and alkaloid contents of partridge tea from different origins, and both could accurately classify partridge tea from different origins. The correct separation and clustering of the samples were observed by principal component analysis and the cross-validated Q2 values by orthogonal partial least squares discriminant analysis (OPLS-DA) were 0.949 (based on stable isotope) and 0.974 (based on polyphenol and alkaloid), respectively. Potential significance indicators for origin identification were screened out by OPLS-DA and random forest algorithm, including three stable isotopes (δ13C, δ D, and δ18O) and four polyphenols (luteolin, protocatechuic acid, astragalin, and naringenin). This study can provide a preliminary guide for the origin identification of Hainan partridge tea.
ABSTRACT
The flexible strain sensor is of significant importance in wearable electronics, since it can help monitor the physical signals from the human body. Among various strain sensors, the foam-shaped ones have received widespread attention owing to their light weight and gas permeability. However, the working range of these sensors is still not large enough, and the sensitivity needs to be further improved. In this work, we develop a high-performance foam-shaped strain sensor composed of Ti3C2Tx MXene, multiwalled carbon nanotubes (MWCNTs), and thermoplastic polyurethane (TPU). MXene sheets are adsorbed on the surface of a composite foam of MWCNTs and TPU (referred to as TPU/MWCNTs foam), which is prefabricated by using a salt-templating method. The obtained TPU/MWCNTs@MXene foam works effectively as a lightweight, easily processable, and sensitive strain sensor. The TPU/MWCNTs@MXene device can deliver a wide working strain range of â¼100% and an outstanding sensitivity as high as 363 simultaneously, superior to the state-of-the-art foam-shaped strain sensors. Moreover, the composite foam shows an excellent gas permeability and suitable elastic modulus close to those of skin, indicating its being highly comfortable as a wearable sensor. Owing to these advantages, the sensor works effectively in detecting both subtle and large human movements, such as joint motion, finger motion, and vocal cord vibration. In addition, the sensor can be used for gesture recognition, demonstrating its perspective in human-machine interaction. Because of the high sensitivity, wide working range, gas permeability, and suitable modulus, our foam-shaped composite strain sensor may have great potential in the field of flexible and wearable electronics in the near future.
Subject(s)
Nanotubes, Carbon , Wearable Electronic Devices , Human Activities , Humans , Monitoring, Physiologic , TitaniumABSTRACT
Sensors, capable of detecting trace amounts of gas molecules or volatile organic compounds (VOCs), are in great demand for environmental monitoring, food safety, health diagnostics, and national defense. In the era of the Internet of Things (IoT) and big data, the requirements on gas sensors, in addition to sensitivity and selectivity, have been increasingly placed on sensor simplicity, room temperature operation, ease for integration, and flexibility. The key to meet these requirements is the development of high-performance gas sensing materials. Two-dimensional (2D) atomic crystals, emerged after graphene, have demonstrated a number of attractive properties that are beneficial to gas sensing, such as the versatile and tunable electronic/optoelectronic properties of metal chalcogenides (MCs), the rich surface chemistry and good conductivity of MXenes, and the anisotropic structural and electronic properties of black phosphorus (BP). While most gas sensors based on 2D atomic crystals have been incorporated in the setup of a chemiresistor, field-effect transistor (FET), quartz crystal microbalance (QCM), or optical fiber, their working principles that involve gas adsorption, charge transfer, surface reaction, mass loading, and/or change of the refractive index vary from material to material. Understanding the gas-solid interaction and the subsequent signal transduction pathways is essential not only for improving the performance of existing sensing materials but also for searching new and advanced ones. In this review, we aim to provide an overview of the recent development of gas sensors based on various 2D atomic crystals from both the experimental and theoretical investigations. We will particularly focus on the sensing mechanisms and working principles of the related sensors, as well as approaches to enhance their sensing performances. Finally, we summarize the whole article and provide future perspectives for the development of gas sensors with 2D materials.
ABSTRACT
The potential of two different hyperspectral imaging systems (visible near infrared spectroscopy (Vis-NIR) and NIR) was investigated to determine TVB-N contents in tilapia fillets during cold storage. With Vis-NIR and NIR data, calibration models were established between the average spectra of tilapia fillets in the hyperspectral image and their corresponding TVB-N contents and optimized with various variable selection and data fusion methods. Superior models were obtained with variable selection methods based on low-level fusion data when compared with the corresponding methods based on single data blocks. Mid-level fusion data achieved the best model based on CARS, in comparison with all others. Finally, the respective optimized models of single Vis-NIR and NIR data were employed to visualize TVB-N contents distribution in tilapia fillets. In general, the results showed the great feasibility of hyperspectral imaging in combination with data fusion analysis in the nondestructive evaluation of tilapia fillet freshness.
Subject(s)
Hyperspectral Imaging/methods , Seafood/analysis , Animals , Image Processing, Computer-Assisted , Spectroscopy, Near-Infrared , Tilapia/metabolismABSTRACT
Biocompatible materials have received increasing attention as one of the most important building blocks for flexible and transient memories. Herein, a fully biocompatible resistive switching (RS) memory electronic composed of a carbon dot (CD)-polyvinyl pyrrolidone (PVP) nanocomposite and a silver nanowire (Ag NW) network buried in a flexible gelatin film is introduced with promising nonvolatile RS characteristics for flexible and transient memory applications. The fabricated device exhibited a rewritable flash-type memory behavior, such as low operation voltage (≈-1.12 V), high ON/OFF ratio (>102), long retention time (over 104 s), and small bending radius (15 mm). As a proof of degradability, this transient memory can dissolve completely within 90 s after being immersed into deionized water at 55 °C; it can decompose naturally in soil within 6 days. This fully biocompatible memory electronic paves a novel way for flexible and wearable green electronics.
ABSTRACT
As enzymes in the outer membrane of the mitochondrion, monoamine oxidases (MAOs) can catalyze the oxidative deamination of monoamines in the human body. According to different substrates, MAOs can be divided into MAO-A and MAO-B. The imbalance of the MAO-A is associated with neurological degeneration, while excess MAO-B activity is closely connected with Parkinson's disease (PD) and Alzheimer's disease (AD); therefore, detection of MAOs is of great significance for the diagnosis and treatment of these diseases. This work reports the multiplexed detection of MAO-A and MAO-B using paper-based devices based on chemiluminescence (CL). The detection limits were 5.01 pg/mL for MAO-A and 8.50 pg/mL for MAO-B in human serum. In addition, we used paper-based devices to detect MAOs in human cells and tissue samples and found that the results of paper-based detection and Western blotting (WB) showed the same trend. While only one antibody can be incubated on the same membrane by WB, multiple antibodies incubated on the same paper enabled simultaneous detection of MAO-A and MAO-B by paper-based devices. The paper-based assay could be used for preliminary early screening of clinical samples for MAOs and can be extended as an alternative to WB for multiplexed detection of various proteins in disease cell or tissue samples.
Subject(s)
Equipment and Supplies , Monoamine Oxidase/blood , Monoamine Oxidase/metabolism , Paper , Cell Line , Humans , Neoplasms/enzymology , Neoplasms/metabolismABSTRACT
Oxidative phosphorylation is an important biological process in the body to produce energy, during which oxygen free radicals are generated as byproduct. Excessive oxygen free radicals cause cell death and reduce the rate of tissue regeneration and healing in a wound. Lignin is a natural antioxidant derived from plants, but its biomedical application is restricted because of the uncertain biocompatibility. In this work, we developed a lignin-incorporated nanogel and explored its application for wound healing. Lignin was extracted from coconut husks and determined to have strong antioxidant activity (IC50 = 25.7 ppm). Various amounts of lignin were incorporated into thermoresponsive nanogels, which were produced from polyurethane copolymers of polyethylene glycol (PEG), polypropylene glycol (PPG), and polydimethylsiloxane (PDMS). It was shown that the addition of lignin had minimal effects on the gelation and rheological properties of the nanogel but slightly increased the critical micelle concentration (CMC) of poly(PEG/PPG/PDMS urethane) copolymer from 3.38 × 10-4 g mL-1 to 4.61 × 10-4 g mL-1. The lignin-incorporated nanogels did not display detectable cytotoxicity. The lignin-incorporated nanogel possessed antioxidant activity, as it reduced the active oxygen level, protecting the LO2 cells from apoptosis caused by oxidative stress. More importantly, in vivo studies demonstrated that the lignin-incorporated nanogels accelerated the healing of burn wounds in mice as proved by the increased expression of Ki67, one marker of cell proliferation. The present work demonstrates that lignin-incorporated nanogel could serve as an antioxidant wound-dressing material and facilitate the wound healing.
Subject(s)
Antioxidants/chemistry , Biocompatible Materials/pharmacology , Lignin/chemistry , Nanogels/chemistry , Wound Healing/drug effects , Animals , Biocompatible Materials/chemistry , Burns/therapy , Disease Models, Animal , Hydrogels/chemistry , Male , Mice , Mice, Inbred BALB C , Micelles , Nanogels/therapeutic use , Particle Size , Polyethylene Glycols/chemistry , Rheology , Skin/pathologyABSTRACT
Transparent conductive films (TCFs) based on silver nanowires (AgNWs) are becoming one of the best candidates in realizing flexible optoelectronic devices. The AgNW-based TCF is usually prepared by coating AgNWs on a transparent polymer film; however, the coated AgNWs easily detach from the polymer underneath because of the weak adhesion between them. Herein, a network of AgNWs is embedded in the transparent hydroxypropyl methyl cellulose film, which has a strong adhesion with the AgNWs. The obtained TCF shows high optical transmittance (>85%), low roughness (rms = 4.8 ± 0.5 nm), and low haze (<0.2%). More importantly, owing to the embedding structure and strong adhesion, this TCF also shows excellent electromechanical stability, which is superior to the reported ones. Employing this TCF in a flexible electrochromic device, the obtained device exhibits excellent cyclic electromechanical stability and high coloring efficiency. Our work demonstrates a promising TCF with superior electromechanical stability for future applications in flexible optoelectronics.
ABSTRACT
Dendrobium officinale, a precious herbal medicine, has been used for a long time in Chinese history. The metabolites of D. officinale, regarded as its effective components to fight diseases, are significantly affected by cultivation substrates. In this study, ultra-performance liquid chromatography mass spectrometry (UPLC-MS/MS) was conducted to analyze D. officinale stems cultured in three different substrates: pine bark (PB), coconut coir (CC), and a pine bark: coconut coir 1:1 mix (PC). A total of 529 metabolites were identified. Multivariate statistical analysis methods were employed to analyze the difference in the content of metabolites extracted from different groups. By the criteria of variable importance in projection (VIP) value ≥1 and absolute log2 (fold change) ≥1, there were a total of 68, 51, and 57 metabolites, with significant differences in content across groups being filtrated out between PB and PC, PB and CC, and PC and CC, respectively. The comparisons among the three groups revealed that flavonoids were the metabolites that fluctuated most. The results suggested the D. officinale stems from the PB group possessed a higher flavonoid content. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis indicated that the significantly regulated metabolites were mainly connected with flavonoid biosynthesis. A comprehensive profile of the metabolic differentiation of D. officinale planted in different substrates was provided, which supports the selection of an optimum cultivation substrate for a higher biomass yield of D. officinale.
ABSTRACT
In the past decades, various alternating current electroluminescent (ACEL) devices, especially the flexible ones, have been developed and used in flat panel display, large-scale decorating, logo display lighting, optical signaling, etc. Transparent plastics are usually used as substrates in ACEL devices; however, they are undegradable and may cause serious environmental pollution. Herein, we have developed a flexible transient ACEL device based on transparent fish gelatin (FG) films. The FG films were made from fish scales, which are sustainable, cost-efficient, and eco-friendly. These films could dissolve in water within seconds at 60 °C and degrade completely within 24 days in soil. The transmittance of these FG films was up to 91.1% in the visible spectrum, comparable to that of polyethylene terephthalate (PET) (90.4%). After forming a composite with silver nanowires (Ag NWs), the Ag NWs-FG film showed a transmittance up to 82.3% and a sheet resistance down to 22.4 Ω sq-1. The fabricated ACEL device based on the Ag NWs-FG film exhibited high flexibility and luminance up to 56.0 cd m-2. The device could be dissolved in water within 3 min. Our work demonstrates that the sustainable, flexible, and transparent FG films are a promising alternative for green and degradable substrates in the field of flexible electronics, including foldable displays, wearable devices, and health monitoring.