ABSTRACT
Spectral confocal sensors are effective for measuring displacements. The core of the spectral confocal measurement system is a dispersive objective lens that uses optical dispersion to establish a one-to-one correspondence between the focusing position and wavelength, achieving high-resolution measurements in the longitudinal direction. Despite significant progress in dispersive objective lenses for spectral confocal sensor systems, challenges such as a limited dispersion range, high cost, and insufficient measurement accuracy persist. To expand the measurement range and improve the accuracy of the spectral confocal sensor, we designed a compact, long-axial dispersion objective lens. This lens has a simple structure that requires only six lens elements, two of which form cemented doublets. The system length is 58 mm, with a working distance of 46 ± 6 mm and a dispersion range of 12 mm within the wavelength range of 450-656 nm. The lens has an object-side numerical aperture (NA) of 0.22 and an image-side NA between 0.198 and 0.24, ensuring high light energy utilization. Finally, a spectral confocal measurement system was constructed based on the designed dispersive objective lens, and performance evaluation tests were conducted. The test results showed that the system achieved a resolution of 0.15 µm and a maximum linear error of ±0.7 µm, demonstrating high-precision measurement capabilities. The proposed lens design enables the development of more portable and cost-effective spectral confocal sensors.
ABSTRACT
High throughput has become an important research direction in the field of super-resolution (SR) microscopy, especially in improving the capability of dynamic observations. In this study, we present a hexagonal lattice structured illumination microscopy (hexSIM) system characterized by a large field of view (FOV), rapid imaging speed, and high power efficiency. Our approach employs spatial light interference to generate a two-dimensional hexagonal SIM pattern, and utilizes electro-optical modulators for high-speed phase shifting. This design enables the achievement of a 210-µm diameter SIM illumination FOV when using a 100×/1.49 objective lens, capturing 2048 × 2048 pixel images at an impressive 98 frames per second (fps) single frame rate. Notably, this method attains a near 100% full field-of-view and power efficiency, with the speed limited only by the camera's capabilities. Our hexSIM demonstrates a substantial 1.73-fold improvement in spatial resolution and necessitates only seven phase-shift images, thus enhancing the imaging speed compared to conventional 2D-SIM.
ABSTRACT
In this study, we developed a novel, compact, and efficient structured illumination microscopy (SIM) system, to our best knowledge. A binary hexagonal lattice pattern was designed and implemented on a digital micromirror device (DMD), resulting in a projection-based structured-light generation. By leveraging the combination of the high-speed switching capability of the DMD with a high-speed CMOS camera, the system can capture 1024×1024 pixels images at a 200 fps frame rate when provided with sufficient illumination power. The loading of the hexagonal lattice pattern reduces the number of images required for reconstruction to seven, and by utilizing the DMD modulating characteristics on the illumination path, there is no need to use bulky mechanical structures for phase shifting. We designed a compact system with 110m m×150m m×170m m dimensions that displayed a 1.61 resolution enhancement for fluorescent particle and biological sample imaging.
ABSTRACT
OBJECTIVE: To evaluate the effects of electromyography on the clinical manifestations and prognosis after posterior lumbar interbody fusion(PLIF) of degenerative lumbar diseases. METHODS: A retrospective analysis was performed on 68 patients with degenerative lumbar diseases, including 29 males and 39 females, aged 21 to 84 years old, who underwent electromyogram (EMG) from January 2018 to October 2019. The patients were divided into negative and positive groups according to whether theresults of EMG was normal or abnormal, PLIF surgery was performed in both groups. The preoperative duration of illness, postoperative recovery time, operative time, intraoperative blood loss, postoperative ambulation time and length of postoperative hospital stay were recorded. The clinical efficacy was evaluated by visual analogue scale(VAS) of low back and lower limb, the Japanese Orthopedic Association(JOA) score before and after operation. RESULTS: All patients were follow-up from 26 to 39 months. The subjective symptoms, clinical signs, daily activities and JOA total scores after operation in two groups were significantly higher than those before preoperation(P<0.05);the clinical signs score and total JOA score in the negative group at 3 months after operation were higher than those in the positive group(P<0.05). The VAS score of leg pain in the negative group after 1 and 3 months was less than that in the positive group(P<0.05). Patients 's illness time, postoperative recovery time, hospitalization time and implantation time in the negative group were shorter than those in the positive group(P<0.05). At other time points, there was no significant difference in low pain VAS, leg pain VAS, JOA scores in the two groups(P>0.05). There was no significant difference in the operation time and intraoperative bleeding volume between the two groups(P>0.05). CONCLUSION: Patients with normal electromyography had shorter disease duration than ones with abnormal electromyography in lumbar degenerative disease;after PLIF, patients with normal electromyography recovered faster than ones with abnormal electromyography, but the results of electromyography had no effect on the final prognosis of PLIF surgery.
Subject(s)
Spinal Fusion , Male , Female , Humans , Young Adult , Adult , Middle Aged , Aged , Aged, 80 and over , Retrospective Studies , Spinal Fusion/methods , Lumbar Vertebrae/surgery , Treatment Outcome , PainABSTRACT
We propose a quasi-confocal microscopy autofocus system incorporating an electrically tunable lens (ETL) to achieve differential detection. The ETL changes its focal length to collect differential curves at speeds <300â Hz, allowing selective locking onto desired focal layers and high-speed differential operations close to the locked focal plane. By segmenting the system's pupil, the interference between the outgoing and incoming near-infrared beams is avoided, thereby greatly improving the signal-to-noise ratio. This ultra-sensitive system, with a focus drift accuracy better than 1/22 focal depth (â¼20â nm @100× objective), provides a new, to the best of our knowledge, implementation pathway to meet the requirements of various microscopy techniques.
ABSTRACT
BACKGROUND: In recent years, nanomaterials have justified their dissemination for biosensor application towards the sensitive and selective detections of clinical biomarkers at the lower levels. MXene is a two-dimensional layered transition metal, attractive for biosensing due to its chemical, physical and electrical properties along with the biocompatibility. MATERIALS AND METHODS: This work was focused on diagnosing osteosarcoma (OS), a common bone cancer, on MXene-modified multiple junction triangles by dielectrode sensing. Survivin protein gene is highly correlated with OS, identified on this sensing surface. Capture DNA was immobilized on MXene by using 3-glycidoxypropyltrimethoxysilane as an amine linker and duplexed by the target DNA sequence. RESULTS: The limitation and sensitivity of detection were found as 1 fM with the acceptable regression co-efficient value (y=1.0037⨰ + 0.525; R2=0.978) and the current enhancement was noted when increasing the target DNA concentrations. Moreover, the control sequences of single- and triple-mismatched and noncomplementary to the target DNA sequences failed to hybridize on the capture DNA, confirming the specificity. In addition, different batches were prepared with capture probe immobilized sensing surfaces and proved the efficient reproducibility. CONCLUSION: This microgap device with Mxene-modified multiple junction triangles dielectrode surface is beneficial to quantify the survivin gene at its lower level and diagnosing OS complication levels.
Subject(s)
Biomarkers, Tumor/metabolism , Biosensing Techniques/methods , Bone Neoplasms/diagnosis , Osteosarcoma/diagnosis , Transition Elements/chemistry , Bone Neoplasms/pathology , Cell Line, Tumor , DNA, Neoplasm/metabolism , Electrodes , Humans , Microelectrodes , Nanostructures/chemistry , Osteosarcoma/pathology , Photoelectron Spectroscopy , Reproducibility of Results , Survivin/metabolismABSTRACT
BACKGROUND: Long noncoding RNAs (lncRNAs) play essential roles in tumor progression. Aberrant colorectal cancer-associated lncRNA (CCAL) has been found in colorectal cancer. However, the function of lncRNA CCAL in osteosarcoma (OS) remains unclear. METHODS: Quantitative real-time PCR (qRT-PCR) was performed to measure CCAL expression in OS tissues and adjacent nontumor tissues. The correlation betweent CCAL expression and clinicopathological features and prognosis was also analyzed. In addition, the function of CCAL was further evaluated by cell proliferation, migration and invasion assays. RESULTS: We showed that CCAL was significantly up-regulated in OS tissues compared with adjacent nontumor tissues. Increased expression of CCAL was correlated with advanced TNM stage and metastasis. Kaplan-Meier analysis demonstrated that patients with high CCAL expression had lower overall survival than those with low CCAL expression. Multivariate Cox regression analysis indicated that CCAL expression might be an independent prognostic factor for OS patients. In addition, functional assays showed that decreased CCAL expression could inhibit OS cell proliferation, migration and invasion ability. CONCLUSIONS: Our findings suggested that CCAL plays critical roles in OS progression and could act as a therapeutic target in the treatment of OS.