The application of wing-shaped window decompression device in the treatment of large odontogenic keratocyst: An observational study.

To enhance the decompression and drainage effects after marsupialization of large odontogenic keratocysts (OKCs) in the jawbone, a novel cyst plug was designed, and its clinical feasibility was investigated. A total of 42 patients with large OKCs requiring decompression were divided into 2 groups: the control group (n = 21), which underwent traditional drainage tube insertion, and the experimental group (n = 21), which received a personalized wing-shaped plug. The clinical efficacy of the wing-shaped plug was assessed, and postoperative recovery times were compared between the 2 groups. The average duration of use for the wing-shaped plug was approximately 14 months. Compared to the control group, the treatment duration in the experimental group was reduced by about 3 months. The wing-shaped plug demonstrated superior fit, comfort, reduced food residue, minimal irritation to surrounding tissues, a more aesthetically pleasing appearance, and less reported pain. The adaptive wing-shaped plug offers improved prognosis for patients undergoing decompression of OKCs and shows significant potential for clinical application.

Refining the targeted population and achieving better for colorectal cancer screening.

This editorial comments on the article entitled "Stage at diagnosis of colorectal cancer through diagnostic route: Who should be screened?" by Agatsuma et al, who conducted a retrospective study aiming at clarifying the stage at colorectal cancer (CRC) diagnosis based on different diagnostic routes. We share our opinion about CRC screening programs. The current situation suggests the need for a more specific and targeted population for CRC screening.

A new classification of mandible defects and condyle changed after mandible reconstruction with FFF.

Objectives: To explore a new classification of mandibular defects and changes in the preserved condyle after mandibular reconstruction with free fibular flap(FFF). Study design: We reviewed patients who underwent mandibular reconstruction with FFF from 2015 to 2021 and classified the mandibular defects into five categories: classⅠ(unilateral-mandibular excluding condyle), classⅡ(unilateral-mandibular including condyle), classⅢ(bilateral-mandibular excluding condyle), classⅣ(bilateral-mandibular including one condyle), and classⅤ(bilateral-mandibular including both condyles). Cone Beam Computed Tomography (CBCT) data were collected preoperatively(T0), at 7-10 postoperative days(T1), 6 postoperative months(T2), and 1 postoperative year(T3). We calculated the condylar surface area, volume, and displacement. Results: 62 cases were collected. The condylar surface areas and volumes in T2 and T3 values were lower than those of T0 and T1(P < 0.01) The condylar displacement was the lowest in ClassI and the largest in ClassⅣ(P < 0.01), while no significant differences in classesⅠ-Ⅲ(P < 0.05). Displacement during T1-T0 was greater than that during T2-T0 and T3-T0(P < 0.05). Conclusion: Mandibular reconstruction with FFF results in displacement and alteration of the condyle within a time interval, and this alteration stabilizes after 6 months. Mandibular defects that do not reach the midline, surgical alteration to preserve the condyle are not required. However, when the defects cross the midline, the condyle should be preserved as much as possible.

COVID-19 vaccine hesitancy and influencing factors among Chinese hospital staff: a cross-sectional study.

We aimed to investigate the willingness of hospital staff to receive the COVID-19 vaccine and explore the associated factors and reasons of vaccine hesitancy among Chinese hospital staff, which were not yet known. A cross-sectional questionnaire survey was conducted online on the vaccine hesitancy of staff in a grade A tertiary general hospital in Beijing from February 22 to 23, 2023. Univariate and multivariate logistic regression were used to assess associations between potential influencing factors and vaccine hesitancy. A total of 3269 valid respondents were included, and the rate of COVID-19 vaccine hesitancy was 32.67%. Multivariate logistic regression showed that women [1.50 (1.22-1.83)], having high-school education level [1.69 (1.04-2.76)], college degree [2.24 (1.35-3.72)] or graduate degree [2.31 (1.33-4.03)], and having underlying disease [1.41 (1.12-1.77)] were associated with a higher rate of COVID-19 vaccine hesitancy. The main reasons for vaccine hesitancy included doubts for the safety and effectiveness of COVID-19 vaccine and worries in adverse reactions. Hospital staff's willingness to vaccinate COVID-19 vaccine is generally high in the study. Hospitals should spread the knowledge of COVID-19 vaccine through multiple channels to improve the cognition of hospital staff and encourage vaccination based on associated factors.

Effect of surgery-first approach on quality of life and mental health of orthognathic patients: A systematic review and meta-analysis.

Objectives: This study intends to explore the effects of the surgery-first approach (SFA) on quality of life and mental health of patients who undergo orthognathic surgery compared to the conventional three-stage approach (CTA). Data: The analysis included eight studies with a total of 307 patients, of which one was randomized controlled trial (RCT), one was clinical controlled trial (CCT), and six were non-randomized studies of interventions (NRSIs). Sources: Electronic databases such as Medline, Embase, Scopus, and Web of Science were searched for eligible trials up to April 2023. Study selection: RCTs, CCTs, and NRSIs, which compared the quality of life or mental health of orthognathic patients treated with SFA and CTA, were included in this study. The meta-analysis showed that the standardized mean differences (SMD) of Oral Health Impact Profiles-14 (OHIP-14) scores and the Orthognathic Quality of Life Questionnaire (OQLQ) between SFA and CTA were -1.58 (P = 0.05) and -2.99 (P < 0.00001) at the termination of the first-stage treatment, which altered to -0.94 (P = 0.54) and 0.09 (P = 0.65) after total treatment. Two studies applied the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) and the Beck Depression Inventory (BDI-II) to examine mental health, resulting in a trend similar to the former scales. Conclusion: In contrast to the conventional procedure, orthognathic treatment with SFA can instantly enhance the quality of life at the end of the first-stage treatment but has similar effects after the overall treatment. Moreover, SFA has a positive impact on psychological conditions. Clinical significance: This study first systematically reviewed the effect of SFA on patients' mental well-being. According to our findings, it is better to select SFA if possible. Otherwise, the patient's psychological condition should be monitored appropriately throughout decompensation for better well-being both physically and mentally.

Three-dimensional analysis of the morphological changes of the craniofacial jaw and condyle in patients with idiopathic condylar resorption.

In this study we aim to describe the three-dimensional analysis of condylar deformation of the temporomandibular joint (TMJ) and morphological changes of the craniofacial jaw in patients with idiopathic condylar resorption (ICR). We also compare those with a control group that is healthy and matched for age and gender. Cone-beam computed tomography (CBCT) and cephalometric radiograph (X-ray) were conducted and analysis of craniofacial measurement, condylar width, length, height, and condylar axial angle changes were done three-dimensionally using ProPlan CMF™ 3.0 software (Materialise). The craniofacial jaw measurements of the ICR patients were significantly different than the control group and the significant changes in the mandible can be seen in ICR patients according to the results of this study. The results of smaller condylar width and height in the ICR group reflect the smaller size of the condyle compared with an unaffected condyle. Also, both right and left sagittal condylar angles (p = 0.001 and p = 0.003), respectively, and axial condylar angles (p = 0.01 and p = 0.02), respectively, displayed significant differences between the two groups. In conclusion, the vertical development of the condyle decreased along with reduced measurements in the width and height of the condyle in ICR patients, and differences in the morphology of the craniofacial jaw and condylar angles were observed between study groups.

Mortality and associated influencing factors among oral cancer patients in western China: A retrospective cohort study from 2016 to 2021.

Few studies have examined oral cancer-related mortality in Guangxi. This study aimed to explore the incidence and characteristics of oral cancer and to identify the risk factors for oral cancer-related mortality. The study was conducted to provide a reference for clinical treatment and to improve the survival rate of patients with oral cancer. A total of 271 patients with oral cancer who were treated in the Stomatology Hospital of Guangxi Medical University from 2016 to 2017 were selected as the research subjects. The follow-up lasted until the middle of 2021. The survival rate and mean survival time of 271 patients were calculated by the Kaplan-Meier method. Cox proportional hazard models and stratified analysis were used to explore the related factors that affect the mortality of patients. Nomogram plots were used to visualize the relationships among multiple variables. Among 271 patients with oral cancer, the 2-year and 5-year overall survival rates were 83.8% and 68.5% respectively. The results of multivariate analysis showed that, age, pathological type, surgery and readmission were significant factors affecting survival. When the above factors were incorporated into nomogram plots and stratified analysis, the results showed that the risk of death after treatment in patients with oral cancer aged > 55 years was 1.693 times higher than that in patients aged ≤ 55 years (HR, hazard ratio [HR] = 1.795, 95% confidence intervals [CI] = 1.073, 3.004). The risk of death after surgical treatment was 0.606 times higher than that without surgical treatment (HR = 0.590, 95% CI = 0.367, 0.948). Patients who were readmitted had a 2.340-fold increased risk of death compared with patients who were not readmitted (HR = 2.340, 95% CI = 1.267,4.321). Older age, surgery, and readmission were risk factors for mortality among patients with oral cancer. The median survival time of 271 patients with oral cancer was 52.0 months. Patients under the age of 55 years old and those who choose surgical treatment tend to have a better prognosis and a longer survival. Oral cancer-related mortality is affected by age, treatment mode, readmission, and other factors. All of these factors are worthy of clinical attention for their prevention and control.

Mandibular reconstruction after excision of recurrent odontogenic keratocyst using a novel mandibular distraction osteogenesis method- a case report.

BACKGROUND: Odontogenic keratocyst is one of the most common benign odontogenic neoplasms with a high recurrence rate. Its resection has the potential to lead to mandibular segmental defects. In this case report, we describe a patient with odontogenic keratocyst who underwent radical resection using a novel distraction osteogenesis (DO) method to reconstruct mandibular segmental defect. CASE PRESENTATION: This case report describes a 19-year-old woman with odontogenic keratocyst of the mandible that recurred after multiple curettages and eventually necessitated radical resection. Mandibular segmental defect after radical resection was reconstructed using a novel DO method that involved directly contacting the segment ends of the defect without the transport disk. However, the distractor broke during the retention period, and a molding titanium plate was used for fixation. This novel distraction method achieved mandibular reconstruction and restored mandibular function and contour.

A natural biomineral for enhancing the biomineralization and cell response of 3D printed polylactic acid bone scaffolds.

Polylactic acid (PLA) has been extensively used as a bone scaffold material, but it still faces many problems including low biomineralization ability, weak cell response, low mechanical properties, etc. In this study, we proposed to utilize the distinctive physical, chemical and biological properties of a natural biomineral with organic matrix, pearl powder, to enhance the overall performance of PLA bone scaffolds. Porous PLA/pearl composite bone scaffolds were prepared using fused deposition modeling (FDM) 3D printing technology, and their comprehensive performance was investigated. Macro- and micro- morphological observation by the optical camera and scanning electron microscopy (SEM) showed the 3D printed scaffolds have interconnected and ordered periodic porous structures. Phase analysis by X-ray diffraction (XRD) indicated pearl powder was well composited with PLA without impurity formation during the melt extrusion process. The mechanical test results indicated the tensile and compressive strength of PLA/pearl composite scaffolds with 10 % pearl powder content yielded the highest values, which were 15.5 % and 21.8% greater than pure PLA, respectively. The water contact angle and water absorption tests indicated that PLA/pearl showed better hydrophilicity than PLA due to the presence of polar groups in the organic matrix of the pearl powder. The results of the simulated body fluid (SBF) soaking revealed that the addition of pearl powder effectively enhanced the formation and deposition of apatite, which was attributed to the release of Ca2+ from the dissolution of pearl powder. The cell culture of bone marrow mesenchymal stem cells (BMSCs) indicated that PLA/pearl scaffolds showed better cell proliferation and osteogenic differentiation than PLA due to the stimulation of the biological organic matrix in pearl powder. These outcomes signify the potential of pearl powder as a natural biomineral containing bio-signal factors to improve the mechanical and biological properties of polymers for better bone tissue engineering application.

Correlation analysis of upper airway morphology in patients with obstructive sleep apnea and anatomically small retruded mandibles.

OBJECTIVE: To investigate the relationship between upper airway morphology and the severity of obstructive sleep apnea (OSA) in patients with anatomically small retruded mandibles. METHODS: Fifty-two patients with small retruded mandibles underwent polysomnography and airway computed tomography. The airway morphology parameters and sleep assessment were compared between the patients with or without OSA. RESULTS: Twenty-eight patients diagnosed with OSA, according to polysomnography, had a higher distance between the hyoid bone and mandibular plane (HMP), lateral dimension (LAT)/anteroposterior dimension (AP), but lower minimum cross-sectional area (mCSA), AP, surface area, volume, avgCSA, and airway uniformity (U). The apnea-hypopnea index had negative correlations with mCSA, AP, surface area, volume, avgCSA, and U, and had a positive correlation with HMP and LAT/AP. CONCLUSION: OSA is common among patients with small retruded mandibles and is associated with a more compressed upper airway shape and longer HMP.

Augmented reality hologram combined with pre-bent distractor enhanced the accuracy of distraction vector transfer in maxillary distraction osteogenesis, a study based on 3D printed phantoms.

Background: Vector control is a significant concern in maxillary distraction osteogenesis (DO). Distraction vector planning on the patient's 3D-printed skull phantom is more intuitive for surgeons and cost-efficient than virtual surgical planning. However, the accuracy of transferring the planned vector to intraoperative (vector transfer) according to the shape of the pre-bent footplate alone is relatively limited. The application of augmented reality (AR) in surgical navigation has been studied for years. However, few studies have focused on its role in maxillary DO vector transfer. This study aimed to evaluate the accuracy of AR surgical navigation combined with the pre-bent distractor in vector transfer by comparing it with the pre-bent distractor alone. Methods: Ten patients with maxillary hypoplasia were enrolled with consent, and three identical 3D-printed skull phantoms were manufactured based on per patient's corresponding pre-operative CT data. Among these, one phantom was for pre-operative planning (n = 10), while and the other two were for the AR+Pre-bending group (n = 10) and the Pre-bending group (n = 10) for the experimental surgery, respectively. In the Pre-bending group, the distraction vector was solely determined by matching the shape of footplates and maxillary surface. In the AR+Pre-bending group, the distractors were first confirmed to have no deformation. Then AR surgical navigation was applied to check and adjust the vector in addition to the steps as in the Pre-bending Group. Results: For the angular deviation of the distraction vector, the AR+Pre-bending group was significantly smaller than the Pre-bending group in spatial (p < 0.001), x-y plane (p = 0.002), and y-z plane (p < 0.001), and there were no significant differences in the x-z plane (p = 0.221). The AR+Pre-bending group was more accurate in deviations of the Euclidean distance (p = 0.004) and the y-axis (p = 0.011). In addition, the AR+Pre-bending group was more accurate for the distraction result. Conclusions: In this study based on 3D printed skull phantoms, the AR surgical navigation combined with the pre-bent distractor enhanced the accuracy of vector transfer in maxillary DO, compared with the pre-bending technique alone.

Promotion of osteogenesis in BMSC under hypoxia by ATF4 via the PERK-eIF2α signaling pathway.

Mandibular distraction osteogenesis (MDO) is an endogenous tissue engineering technology in which bone marrow mesenchymal stem cells (BMSC) play a key role in MDO-related osteogenesis. Activating transcription factor 4 (ATF4) is involved in osteogenesis through activation of PERK (Protein kinase R-like endoplasmic reticulum kinase) in endoplasmic reticulum stress (ERS) condition under hypoxia. However, the specific role of ATF4 in MDO with BMSC remains unknown. The aim of this study was to explore the effects of ATF4 in MDO with BMSC under hypoxia. Briefly, canine BMSCs were cultured in a hypoxic chamber, and effects of hypoxia were evaluated using cell migration assay and Alizarin Red S staining. Expression levels of protein kinase R-like endoplasmic reticulum kinase, eukaryotic translation initiation factor 2α, ATF4, osteocalcin, and bone sialoprotein were evaluated using quantitative polymerase chain reaction and western blotting. BMSCs were transduced with the ATF4-small interfering RNA lentivirus. The effects were evaluated using all the aforementioned experiments. The results showed that hypoxia promoted migration, osteoblast differentiation, and ATF4 expression in BMSC. ATF4 knockdown in BMSC significantly inhibited migration and osteoblast differentiation abilities, while hypoxia reversed these effects to some extent. In addition, the molecular mechanism partly depended on the ERS signaling pathway, with ATF4 as the key factor. In summary, we presented a novel mechanism of ATF4-mediated regulation of BMSC under hypoxia.

ECFC-derived exosomal THBS1 mediates angiogenesis and osteogenesis in distraction osteogenesis via the PI3K/AKT/ERK pathway.

Background: Distraction osteogenesis (DO) is a widely used bone regenerative technique. However, the DO process is slow, and the consolidation phase is long. Therefore, it is of great clinical significance to explore the mechanism of DO, and shorten its duration. Recent studies reported that stem cell exosomes may play an important role in promoting angiogenesis related to DO, but the mechanism remains unclear. Methods: Canine endothelial colony-forming cells (ECFCs) were isolated and cultured, and the expression of THBS1 in canine ECFCs were inhibited using a lentiviral vector. The exosomes secreted by canine ECFCs were isolated and extracted, and the effect of exosomes on the angiogenic activity of Human umbilical vein endothelial cells (HUVECs) was detected by proliferation, migration, and tube formation experiments. WB and qRT-PCR were used to explore the effects and mechanisms of THBS1-mediated ECFC-Exos on HUVECs angiogenesis. Then, a mandibular distraction osteogenesis (MDO) model was established in adult male beagles, and exosomes were injected into the canine peripheral blood. Micro-CT, H&E, Masson, and IHC staining were used to explore the effects and mechanisms of THBS1-mediated ECFC-Exos on angiogenesis and osteogenesis in the DO area. Results: ECFC-Exo accelerated HUVECs proliferation, migration and tube formation, and this ability was enhanced by inhibiting the expression of THBS1 in ECFC-Exo. Using Western blot-mediated detection, we demonstrated that inhibiting THBS1 expression in ECFCs-Exo activated PI3K, AKT, and ERK phosphorylation levels in HUVECs, which promoted VEGF and bFGF expressions. In the DO model of the canine mandible, ECFCs-Exo injected into the peripheral blood aggregated into the DO gap, thus promoting angiogenesis and bone formation in the DO tissue by reducing THBS1 expression in ECFC-Exo. Conclusion: Our findings suggested that ECFC-Exos markedly enhances angiogenesis of endothelial cells, and promotes bone healing in canine MDO. Thus, THBS1 plays a crucial role in the ECFC-Exos-mediated regulation of canine MDO angiogenesis and bone remodeling. The translational potential of this article: This study reveals that the angiogenic promotion via THBS1 suppression in ECFC-Exos may be a promising strategy for shortening the DO duration.

Hsp20 Promotes Endothelial Progenitor Cell Angiogenesis via Activation of PI3K/Akt Signaling Pathway under Hypoxia.

BACKGROUND: Mandibular distraction osteogenesis (MDO) is a kind of endogenous tissue engineering technology that lengthens the jaw and opens airway so that a patient can breathe safely and comfortably on his or her own. Endothelial progenitor cells (EPCs) are crucial for MDO-related angiogenesis. Moreover, emerging evidence suggests that heat shock protein 20 (Hsp20) modulates angiogenesis under hypoxic conditions. However, the specific role of Hsp20 in EPCs, in the context of MDO, is not yet known. The aim of this study was to explore the expression of Hsp20 during MDO and the effects of Hsp20 on EPCs under hypoxia. METHODS: Mandibular distraction osteogenesis and mandibular bone defect (MBD) canine model were established. The expression of CD34, CD133, HIF-1α, and Hsp20 in callus was detected by immunofluorescence on day 14 after surgery. Canine bone marrow EPCs were cultured, with or without optimal cobalt chloride (CoCl2) concentration. Hypoxic effects, caused by CoCl2, were evaluated by means of the cell cycle, cell apoptosis, transwell cell migration, and tube formation assays. The Hsp20/KDR/PI3K/Akt expression levels were evaluated via immunofluorescence, RT-qPCR, and western blot. Next, EPCs were incorporated with either Hsp20-overexpression or Hsp20-siRNA lentivirus. The resulting effects were evaluated as described above. RESULTS: CD34, CD133, HIF-1α, and Hsp20 were displayed more positive in the callus of MDO compared with MBD. In addition, hypoxic conditions, generated by 0.1 mM CoCl2, in canine EPCs, accelerated cell proliferation, migration, tube formation, and Hsp20 expression. Hsp20 overexpression in EPCs significantly stimulated cell proliferation, migration, and tube formation, whereas Hsp20 inhibition produced the opposite effect. Additionally, the molecular mechanism was partly dependent on the KDR/PI3K/Akt pathway. CONCLUSION: In summary, herein, we present a novel mechanism of Hsp20-mediated regulation of canine EPCs via Akt activation in a hypoxic microenvironment.

Correction to "Aberrant methylation of secreted protein acidic and rich in cysteine gene and its significance in gastric cancer".

[This corrects the article on p. 6713 in vol. 25, PMID: 31857774.].

Discovery of (5-(Benzylthio)-4-(3-(trifluoromethyl)phenyl)-4H-1,2,4-triazol-3-yl) Methanols as Potent Phytoene Desaturase Inhibitors through Virtual Screening and Structure Optimization.

Phytoene desaturase (PDS) is not only an important enzyme in the biosynthesis of carotenoids but also a promising target for herbicide discovery. However, in recent years, no expected PDS inhibitors with new scaffolds have been reported. Hence, a solution for developing PDS inhibitors is to search for new compounds with novel chemotypes based on the PDS protein structure. In this work, we integrated structure-based virtual screening, structure-guided optimization, and biological evaluation to discover some PDS inhibitors with novel chemotypes. It is noteworthy that the highly potent compound 1b, 1-(4-chlorophenyl)-2-((5-(hydroxymethyl)-4-(3-(trifluoromethyl)phenyl)-4H-1,2,4-triazol-3-yl)thio)ethan-1-one, exhibited a broader spectrum of post-emergence herbicidal activity at 375-750 g/ha against six kinds of weeds than the commercial PDS inhibitor diflufenican. Surface plasmon resonance (SPR) assay showed that the affinity of our compound 1b (KD = 65.9 µM) to PDS is slightly weaker but at the same level as diflufenican (KD = 38.3 µM). Meanwhile, determination of the phytoene content and PDS mRNA quantification suggested that 1b could induce PDS mRNA reduction and phytoene accumulation. Moreover, 1b also caused the increase of reactive oxygen species (ROS) and the change of ROS-associated enzyme activity in albino leaves. Hence, all these results indicated the feasibility of PDS protein structure-based virtual screen and structure optimization to search for highly potent PDS inhibitors with novel chemotypes for weed control.

microRNA-146a mediates distraction osteogenesis via bone mesenchymal stem cell inflammatory response.

Distraction osteogenesis (DO) is a widely used surgical technique to repair bone defects, partly owing to its high efficiency in inducing osteogenesis; however, the process of osteogenesis is complex, and the precise mechanism is still unclear. Among the factors identified for an effective DO procedure, well-controlled inflammation is essential. We aimed to explore how microRNA(miR)-146a, a negative regulator of inflammation, influences osteogenesis in DO. First, we established canine right mandibular DO and bone fracture models to evaluate the expression level of miR-146a in response to these procedures. Second, bone marrow mesenchymal stem cells (BMSCs) were isolated from healthy puppies and cultured with lipopolysaccharide (LPS) to observe how inflammation affects osteogenesis. Finally, the osteogenesis activity of BMSCs transfected with lentiviral vector either overexpressing (miR-146a-up) or inhibited for miR-146a expression was evaluated. miR-146a-up-transfected BMSCs were injected locally into the distraction gaps of the DO model canines. On days 42 and 56 post-surgery, the bone volume/tissue volume and bone mineral density values were evaluated via using micro-computed tomography, and newly formed tissues were harvested and evaluated via histological staining. The expression of miR-146a in both the DO canine model and LPS-stimulated BMSCs increased. Overexpression of miR-146a enhanced cell proliferation, migration, and osteogenic differentiation. Additionally, the newly formed callus was improved in canine mandibles injected with miR-146a-up-transfected BMSCs. In summary, miR-146a regulates mandibular DO by improving osteogenesis, and can serve as a potential target to shorten the therapy period of DO.

Identification of the key exosomal lncRNAs/mRNAs in the serum during distraction osteogenesis.

BACKGROUND: Distraction osteogenesis (DO), a kind of bone regenerative process, is not only extremely effective, but the osteogenesis rate is far beyond ordinary bone fracture (BF) healing. Exosomes (Exo) are thought to play a part in bone regeneration and healing as key players in cell-to-cell contact. The object of this work was to determine whether exosomes derived from DO and BF serum could stimulate the Osteogenic Differentiation in these two processes, and if so, which genes could be involved. METHODS: The osteogenesis in DO-gap or BF-gap was evaluated using radiographic analysis and histological analysis. On the 14th postoperative day, DO-Exos and BF-Exos were isolated and cocultured with the jaw of bone marrow mesenchymal stem cells (JBMMSCs). Proliferation, migration and osteogenic differentiation of JBMMSCs were ascertained, after which exosomes RNA-seq was performed to identify the relevant gene. RESULTS: Radiographic and histological analyses manifested that osteogenesis was remarkably accelerated in DO-gap in comparison with BF-gap. Both of the two types of Exos were taken up by JBMMSCs, and their migration and osteogenic differentiation were also seen to improve. However, the proliferation showed no significant difference. Finally, exosome RNA-seq revealed that the lncRNA MSTRG.532277.1 and the mRNA F-box and leucine-rich repeat protein 14(FBXL14) may play a key role in DO. CONCLUSIONS: Our findings suggest that exosomes from serum exert a critical effect on the rapid osteogenesis in DO. This promoting effect might have relevance with the co-expression of MSTRG.532277.1 and FBXL14. On the whole, these findings provide new insights into bone regeneration, thereby outlining possible therapeutic targets for clinical intervention.