Surface Enhanced Infrared Absorption Using Single Conducting Polymer Antennas.

Infrared absorption provides the intrinsic vibrational information on chemical bonds, which is important for identifying molecular moieties. To enhance the sensitivity of infrared absorption, plasmonic antennas have been widely used to localize and concentrate mid-infrared light into nanometer-scale hotspots at desired wavelengths. Here, instead of inorganic plasmonic antennas, we have demonstrated surface-enhanced infrared absorption (SEIRA) using single plasmonic antennas based on a conducting polymer. With commercially available PEDOT:PSS (poly(ethylenedioxythiophene):poly(styrenesulfonate)), the organic plasmonic antennas are in the fashion of single PEDOT:PSS micropillars. The plasmonic resonance of single PEDOT:PSS micropillar antennas can be easily tuned by the micropillar diameter or by the interantenna gap across the mid-infrared frequencies. These organic plasmonic antennas show the ability to enhance the molecular vibrations of CBP (4,4'-bis(N-carbazolyl)-1,1'-biphenyl) molecules with a thickness of about 50 nm, illustrating the good SEIRA sensitivity (with SEIRA sensitivity up to ∼7800) at the single antenna level. Our findings provide another material choice for mid-infrared plasmonic antennas toward SEIRA applications.

Magnetic-biased chiral molecules enabling highly oriented photovoltaic perovskites.

The interaction between sites A, B and X with passivation molecules is restricted when the conventional passivation strategy is applied in perovskite (ABX3) photovoltaics. Fortunately, the revolving A-site presents an opportunity to strengthen this interaction by utilizing an external field. Herein, we propose a novel approach to achieving an ordered magnetic dipole moment, which is regulated by a magnetic field via the coupling effect between the chiral passivation molecule and the A-site (formamidine ion) in perovskites. This strategy can increase the molecular interaction energy by approximately four times and ensure a well-ordered molecular arrangement. The quality of the deposited perovskite film is significantly optimized with inhibited nonradiative recombination. It manages to reduce the open-circuit voltage loss of photovoltaic devices to 360 mV and increase the power conversion efficiency to 25.22%. This finding provides a new insight into the exploration of A-sites in perovskites and offers a novel route to improving the device performance of perovskite photovoltaics.

Room-temperature high-speed electrical modulation of excitonic distribution in a monolayer semiconductor.

Excitons in monolayer semiconductors, benefitting from their large binding energies, hold great potential towards excitonic circuits bridging nano-electronics and photonics. However, achieving room-temperature ultrafast on-chip electrical modulation of excitonic distribution and flow in monolayer semiconductors is nontrivial. Here, utilizing lateral bias, we report high-speed electrical modulation of the excitonic distribution in a monolayer semiconductor junction at room temperature. The alternating charge trapping/detrapping at the two monolayer/electrode interfaces induces a non-uniform carrier distribution, leading to controlled in-plane spatial variations of excitonic populations, and mimicking a bias-driven excitonic flow. This modulation increases with the bias amplitude and eventually saturates, relating to the energetic distribution of trap density of states. The switching time of the modulation is down to 5 ns, enabling high-speed excitonic devices. Our findings reveal the trap-assisted exciton engineering in monolayer semiconductors and offer great opportunities for future two-dimensional excitonic devices and circuits.

Highly polarized light emission from hybrid of quantum dots and plasmons in the intermediate coupling regime.

Colloidal semiconductor quantum dots (QDs), with a size tunable bandgap and remarkably high quantum efficiency, have been recognized as ideal light sources in quantum information and light emitting devices. For light sources, besides the emission intensity and spectral profile, the degree of polarization (DoP) is an essential parameter. Here, by embedding a monolayer of QDs inside the nanogap between a bottom Au mirror and a top Ag nanowire, we have demonstrated highly polarized light emission from the QDs with an average DoP of 0.89. In addition to the anisotropic photoluminescence (PL) intensity, the PL spectra are distinct at different polarizations, with an asymmetric spectral shape or even two-peak features. Such an anisotropic emission behavior arises from the coupling between the QDs and the largely confined and polarization-dependent gap-plasmons in the Au/QD/Ag nanocavities in the intermediate coupling regime. Our results demonstrate the possibility of achieving highly polarized light sources by coupling spherical QDs to single anisotropic plasmonic nanocavities, to provide new opportunities in the future design of polarized QD-based display devices.

Room-Temperature Polarized Light-Emitting Diode-Based on a 2D Monolayer Semiconductor.

Transition metal dichalcogenide (TMD)-based 2D monolayer semiconductors, with the direct bandgap and the large exciton binding energy, are widely studied to develop miniaturized optoelectronic devices, e.g., nanoscale light-emitting diodes (LEDs). However, in terms of polarization control, it is still quite challenging to realize polarized electroluminescence (EL) from TMD monolayers, especially at room temperature. Here, by using Ag nanowire top electrode, polarized LEDs are demonstrated based on 2D monolayer semiconductors (WSe2 , MoSe2 , and WS2 ) at room temperature with a degree of polarization (DoP) ranging from 50% to 63%. The highly anisotropic EL emission comes from the 2D/Ag interface via the electron/hole injection and recombination process, where the EL emission is also enhanced by the polarization-dependent plasmonic resonance of the Ag nanowire. These findings introduce new insights into the design of polarized 2D LED devices at room temperature and may promote the development of miniaturized 2D optoelectronic devices.

In Situ Active Switching of Bipolar Current Rectification in 2D Semiconductor Vertical Diodes.

Two-dimensional semiconducting transition-metal dichalcogenides (TMDCs) have attracted extensive attention as building blocks of miniaturized electronic and optical devices. However, as the characteristics of TMDC devices are predominately determined by their device structures, the function of TMDC devices is fixed once fabricated, leaving the reconfigurable active device and circuit a challenge. Here, we have demonstrated the current rectification switching in TMDC vertical diodes using a liquid metal (EGaIn) top electrode with a reconfigurable contact area. The rectification switching is closely related to the ultrathin gallium oxide layer on the surface of EGaIn. Under the small contact, with the existence of gallium oxide, photocurrent dominates the electrical transport showing a negative rectification, while as the contact increases, the broken gallium oxide leads to rectification switching to the positive bias direction. Such rectification switching applies to thin TMDC flakes down to 3 nm, benefitting from the soft electrical contact between the TMDC and the EGaIn electrode. Our work shows the new possibility of actively reconfigurable TMDC vertical diodes enabled by the liquid metal electrode and will promote promising applications of flexible and tunable TMDC-based nanoelectronic devices.

Visualizing the Surface Photocurrent Distribution in Perovskite Photovoltaics.

Defect states play an important role in the photovoltaic performance of metal halide perovskites. Particularly, the passivation of surface defects has made great contributions to high-performance perovskite photovoltaics. This highlights the importance of understanding the surface defects from a fundamental level by developing more accurate and operando characterization techniques. Herein, a strategy to enable the surface carriers and photocurrent distributions on perovskite films to be visualized in the horizontal direction is put forward. The visual image of photocurrent distribution is realized by combining the static local distribution of carriers provided by scanning near-field optical microscopy with the dynamic transporting of carriers achieved via a scanning photocurrent measurement system. Taking a surface passivated molecule as an example, a comprehensive defect scene including static and dynamic as well as local and entire conditions is obtained using this strategy. The comprehensive analysis of the trap states in perovskite films is pioneered vertically and horizontally, which will powerfully promote the deep understanding of defect mechanisms and carrier behavior for the goal of fabricating high-performance perovskite optoelectronic devices.

Vibrational Strong Coupling between Surface Phonon Polaritons and Organic Molecules via Single Quartz Micropillars.

Vibrational strong coupling (VSC), the strong coupling between optical resonances and the dipolar absorption of molecular vibrations at mid-infrared frequencies, holds the great potential for the development of ultrasensitive infrared spectroscopy, the modification of chemical properties of molecules, and the control of chemical reactions. In the realm of ultracompact VSC, there is a need to scale down the size of mid-infrared optical resonators and to elevate their optical field strength. Herein, by using single quartz micropillars as mid-infrared optical resonators, the strong coupling is demonstrated between surface phonon polariton (SPhP) resonances and molecular vibrations from far-field observation. The single quartz micropillars support sharp SPhP resonances with an ultrasmall mode volume, which strongly couples with the molecular vibrations of 4-nitrobenzyl alcohol (C7 H7 NO3 ) molecules featuring pronounced mode splitting and anticrossing dispersion. The coupling strength depends on the molecular concentration and reaches the strong coupling regime with only 7300 molecules. The findings pave the way for promoting the VSC sensitivity, miniaturing the VSC devices, and will boost the development of ultracompact mid-infrared spectroscopy and chemical reaction control devices.