Evaluation of Silybin Nanoparticles against Liver Damage in Murine Schistosomiasis mansoni Infection.

Silybin (SIB) is a hepatoprotective drug known for its poor oral bioavailability, attributed to its classification as a class IV drug with significant metabolism during the first-pass effect. This study explored the potential of solid lipid nanoparticles with (SLN-SIB-U) or without (SLN-SIB) ursodeoxycholic acid and polymeric nanoparticles (PN-SIB) as delivery systems for SIB. The efficacy of these nanosystems was assessed through in vitro studies using the GRX and Caco-2 cell lines for permeability and proliferation assays, respectively, as well as in vivo experiments employing a murine model of Schistosomiasis mansoni infection in BALB/c mice. The mean diameter and encapsulation efficiency of the nanosystems were as follows: SLN-SIB (252.8 ± 4.4 nm, 90.28 ± 2.2%), SLN-SIB-U (252.9 ± 14.4 nm, 77.05 ± 2.8%), and PN-SIB (241.8 ± 4.1 nm, 98.0 ± 0.2%). In the proliferation assay with the GRX cell line, SLN-SIB and SLN-SIB-U exhibited inhibitory effects of 43.09 ± 5.74% and 38.78 ± 3.78%, respectively, compared to PN-SIB, which showed no inhibitory effect. Moreover, SLN-SIB-U demonstrated a greater apparent permeability coefficient (25.82 ± 2.2) than PN-SIB (20.76 ± 0.1), which was twice as high as that of SLN-SIB (11.32 ± 4.6) and pure SIB (11.28 ± 0.2). These findings suggest that solid lipid nanosystems hold promise for further in vivo investigations. In the murine model of acute-phase Schistosomiasis mansoni infection, both SLN-SIB and SLN-SIB-U displayed hepatoprotective effects, as evidenced by lower alanine amino transferase values (22.89 ± 1.6 and 23.93 ± 2.4 U/L, respectively) than those in control groups I (29.55 ± 0.7 U/L) and I+SIB (34.29 ± 0.3 U/L). Among the prepared nanosystems, SLN-SIB-U emerges as a promising candidate for enhancing the pharmacokinetic properties of SIB.

Identification and Characterization of Rotigotine Degradation Products by HPLC Coupled DAD and CAD Detectors and HRMS Through Q-Orbitrap and Electrospray Ionization.

Rotigotine (RTG) is a dopamine agonist used in the treatment of Parkinson's disease. As it is susceptible to oxidation, stability studies must be carefully designed for the identification and characterization of all possible degradation products. Here, RTG degradation was evaluated according to the International Conference on Harmonization guidelines under various stress conditions, including acidic and basic hydrolysis, oxidative, metallic, photolytic, and thermal conditions. Additionally, more severe stress conditions were applied to induce RTG degradation. Significant degradation was only observed under oxidative and photolytic conditions. The samples were analyzed by high performance liquid chromatography coupled to photodiode array detectors, charged aerosol, and high-resolution mass spectrometry. Chromatographic analyses revealed the presence of eight substances related to RTG, four of which were already described and were qualified impurities (impurities B, C, K and E) and four new degradation products (DP-1 - DP-4), whose structures were characterized by high-resolution mass spectrometry through Q-Orbitrap and electrospray ionization. In the stress testing of the active pharmaceutical ingredient in solid form, significant RTG degradation was observed in the presence of the oxidative matrix. The results corroborate the literature that confirm the high susceptibility of RTG to oxidation and the importance of using different detectors to detect degradation products in forced degradation studies.

Use of In silico Methodologies to Predict the Bioavailability of Oral Suspensions: A Regulatory Approach.

BACKGROUND: Oral suspensions are heterogeneous disperse systems, and the particle size distribution, crystalline form of the dispersed solid, and composition of the formulation can be listed as parameters that control the drug dissolution rate and its bioavailability. OBJECTIVE: The aim of this work was to develop a discriminative dissolution test, which, in association with in silico methodologies, can make it possible to safely anticipate bioavailability problems. METHODS: Nimesulide and ibuprofen (BCS class II) and cephalexin (BCS class I) oral suspensions were studied. Previously, solid-state structure and particle size in active pharmaceutical ingredients were characterized and the impact of differences on solubility was evaluated for the choice of discriminative medium. Afterwards, particle size distribution (0.1 to 360 µm), dissolution profile, and in vitro permeability in Caco-2 cell of commercial suspensions, were determined. These parameters were used as input for the establishment of the in vitro-in vivo correlation (IVIVC) for the suspensions using the GastroPlus™ with Wagner-Nelson and Loo- Riegelmann deconvolution approach. RESULTS: The predicted/observed pharmacokinetic model showed good correlation coefficients (r) of 0.960, 0.950, and 0.901, respectively. The IVIVC was established for one nimesulide and two ibuprofen suspensions with r between 0.956 and 0.932, and the percent prediction error (%PE) did not exceed 15%. CONCLUSION: In this work, we have performed a complete study combining in vitro/in silico approaches with the aim of anticipating the safety and efficacy of oral pharmaceutical suspensions in order to provide a regulatory tool for this category of products in a faster and more economical way.

Alternative Methods for Pulmonary-Administered Drugs Metabolism: A Breath of Change.

Prediction of pulmonary metabolites following inhalation of a locally acting pulmonary drug is essential to the successful development of novel inhaled medicines. The lungs present metabolic enzymes, therefore they influence drug disposal and toxicity. The present review provides an overview of alternative methods to evaluate the pulmonary metabolism for the safety and efficacy of pulmonary delivery systems. In vitro approaches for investigating pulmonary drug metabolism were described, including subcellular fractions, cell culture models and lung slices as the main available in vitro methods. In addition, in silico studies are promising alternatives that use specific software to predict pulmonary drug metabolism, determine whether a molecule will react with a metabolic enzyme, the site of metabolism (SoM) and the result of this interaction. They can be used in an integrated approach to delineate the major cytochrome P450 (CYP) isoforms to rationalize the use of in vivo methods. A case study about a combination of experimental and computational approaches was done using fluticasone propionate as an example. The results of three tested software, RSWebPredictor, SMARTCyp and XenoSite, demonstrated greater probability of the fluticasone propionate being metabolized by CYPs 3A4 at the S1 atom of 5-S-fluoromethyl carbothioate group. As the in vitro studies were not able to directly detect pulmonary metabolites, those alternatives in silico methods may reduce animal testing efforts, following the principle of 3Rs (Replacement, Reduction and Refinement), and contribute to the evaluation of pharmacological efficacy and safety profiles of new drugs in development.

Stability Indicating Methods for Determination of Third Generation Antiepileptic Drugs and Their Related Substances.

The third generation of antiepileptic drugs that have been approved by international regulatory agencies between 2007 and 2018 include rufinamide, stiripentol, eslicarbazepine acetate, lacosamide, perampanel, brivaracetam and everolimus. As part of demonstrating their safety profile, stability indicating methods are developed to monitor these drugs and their impurities. In this context, this review describe some characteristics, impurities and the stability indicating methods used for the determination of these drugs and the presence of their related substances. Through a search in official compendia and scientific articles, fifty-six analytical methodologies were identified up to October 2020. The methodologies were developed using techniques of HPLC, UPLC, HPTLC, GC and UV/Vis spectrophotometry. A majority of the methods (∼70%) employed HPLC-UV. A number of these antiepileptic drugs were found to have had a small number of studies related to their stability and for the detection of impurities. The presentation of the current level of research on third generation antiepileptic drugs highlights the need for new stability and safety studies that are necessary to develop new pharmaceutical products containing these drugs.

Ezetimibe: A Review of Analytical Methods for the Drug Substance, Pharmaceutical Formulations and Biological Matrices.

Ezetimibe (EZM) is a selective inhibitor of the sterol transporter Niemann-Pick C1-Like 1 in the small intestine used as an adjunctive therapy to lower cholesterol levels in cases of hyperlipidemia. The goal of this work was to summarize the main physical-chemical, pharmacological and pharmacokinetic characteristics of EZM, as well as to describe the main analytical methodologies for the quantification of the drug. Methods described in the United States Pharmacopeia for EZM raw material and tablets were also presented. The drug has a large number of process-related impurities and degradation products and needs strict quality control of its impurities. Specific chiral methods for the evaluation of its chiral impurities are also a need for EZM. The main advantages and disadvantages of the compiled analytical methods were presented, as well as the limits of detection and quantitation. The fastest and most efficient methods were highlighted. Most methods for analyzing EZM used C8 or C18 stationary phases in gradient mode with binary mobile phases containing acetonitrile and an acidic buffer solution with ultraviolet detection. For analysis of EZM in biological matrices, liquid chromatography-tandem mass spectrometry is generally employed using electron spray ionization in negative ionization mode using multiple reaction monitoring. Different methods in the literature evaluate a large number of impurities for EZM, however new stability-indicating high-performance liquid chromatography methods for the drug are still needed.

Lopinavir/Ritonavir: A Review of Analytical Methodologies for the Drug Substances, Pharmaceutical Formulations and Biological Matrices.

Lopinavir/ritonavir is a potent coformulation of protease inhibitors used against HIV infection. Lopinavir is the main responsible for viral load suppression, whereas ritonavir is a pharmacokinetic enhancer. Both of them have recently gained relevance as candidate drugs against severe coronavirus disease (COVID-19). However, significant beneficial effects were not observed in randomized clinical trials. This review summarizes the main physical-chemical, pharmacodynamic, and pharmacokinetic properties of ritonavir and lopinavir, along with the analytical methodologies applied for biological matrices, pharmaceutical formulations, and stability studies. The work also aimed to provide a comprehensive impurity profile for the combined formulation. Several analytical methods in four different pharmacopeias and 37 articles in literature were evaluated and summarized. Chromatographic methods for these drugs frequently use C8 or C18 stationary phases with acetonitrile and phosphate buffer (with ultraviolet detection) or acetate buffer (with tandem mass spectrometry detection) as the mobile phase. Official compendia methods show disadvantages as extended total run time and complex mobile phases. HPLC tandem-mass spectrometry provided high sensitivity in methodologies applied for human plasma and serum samples, supporting the therapeutic drug monitoring in HIV patients. Ritonavir and lopinavir major degradation products arise in alkaline and acidic environments, respectively. Other non-chromatographic methods were also summarized. Establishing the impurity profile for the combined formulation is challenging due to a large number of impurities reported. Easier and faster analytical methods for impurity assessment are still needed.

Development of rivaroxaban microemulsion-based hydrogel for transdermal treatment and prevention of venous thromboembolism.

We have developed a microemulsion (ME)-based hydrogel, containing propylene glycol, Azone®, Labrasol®, isobutanol and water (20:3:18:3:56), for the transdermal delivery of rivaroxaban (RVX). Formulation ME-1:RVX, which was loaded with 0.3 mg/g of RVX, presented as a clear, homogenous fluid with a droplet size of 82.01 ± 6.32 nm and a PdI of 0.207 ± 0.01. To provide gelation properties, 20 % (w/w) of Pluronic® F-127 was added to ME-1:RVX to generate formulation PME-1a. An added benefit was an increased capacity for RVX to 0.4 mg/g (formulation PME-1b). PME-1b displayed spherical droplets with a nanoscale diameter as observed by Transmission Electron Microscopy. The release of RVX from PME-1b was 20.71 ± 0.76 µg/cm2 with a permeation through pig epidermis of 18.32 ± 8.87 µg/cm2 as measured in a Franz Cell for 24 h. PME-1b presented a pseudoplastic behavior, pH value compatible with the skin and good stability over 60 days at room and elevated temperatures. The prothrombin time was assessed for each concentration of RVX obtained in the permeation assay and each demonstrated a relevant anticoagulant activity. PME-1b also presented no cytotoxicity against HaCaT cells. Utilizing GastroPlus® software, an in silico analysis was performed to simulate the delivery of PME-1b through a transdermal system that suggested a minimum dose of RVX for the treatment and prevention of venous thromboembolism could be achieved with an 8 h administration regimen. These results suggest that PME-1b is a promising transdermal formulation for the effective delivery of RVX that could be a viable alternative for the treatment and prevention of venous thromboembolism.

Clofazimine functionalized polymeric nanoparticles for brain delivery in the tuberculosis treatment.

Central nervous system tuberculosis (CNS-TB) is the most severe form of the disease especially due to the inability of therapeutics to cross the blood-brain barrier (BBB). Clofazimine (CFZ) stands out for presenting high in vitro activity against multi-drug resistant strains of Mycobacterium tuberculosis, however, CFZ physicochemical and pharmacokinetics properties limit drug penetration into the CNS and, consequently, its clinical use. The aim of this work was to develop polymeric nanoparticles (NPs) of poly(lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) loaded with CFZ and functionalized with a transferrin receptor (TfR)-binding peptide, aiming brain drug delivery for CNS-TB treatment by the intravenous route. The poor water solubility and high lipophilicity of CFZ was overcome through its entrapment into PLGA-PEG NPs manufactured by both conventional and microfluidic techniques using the nanoprecipitation principle. In vitro studies in brain endothelial hCMEC/D3 cells demonstrated that CFZ incorporation into the NPs was advantageous to reduce drug cytotoxicity. The TfR-binding peptide-functionalized NPs showed superior cell interaction and higher CFZ permeability across hCMEC/D3 cell monolayers compared to the non-functionalized NP control, thus indicating the efficacy of the functionalization strategy on providing CFZ transport through the BBB in vitro. The functionalized NPs demonstrate suitability for CFZ biological administration, suggested with low plasma protein binding, off-target biodistribution and precise delivery of CFZ towards the brain parenchyma.

Rotigotine: A Review of Analytical Methods for the Raw Material, Pharmaceutical Formulations, and Its Impurities.

BACKGROUND: Rotigotine is a dopaminergic agonist developed for the treatment of Parkinson's disease and restless leg syndrome. The pure levorotatory enantiomer is marketed in several countries as a transdermal patch. Reports of oxidation and instability in a previous formulation indicate the need to evaluate impurities in both the raw material and pharmaceutical dosage forms of rotigotine to ensure product quality. OBJECTIVE: This review examines the main analytical methods for analyzing rotigotine in raw material and its transdermal patches with the aim of assisting the development of new pharmaceutical formulations and stability studies. METHODS: Analytical methods based on high-performance liquid chromatography for rotigotine from pharmacopoeias and literature were evaluated. A comparison was made between the methods found in the literature and official rotigotine monographs described by the United States, European, and British Pharmacopoeias, including a discussion of their acceptance limits for impurities related to the drug. The different impurities from the synthesis processes and degradation studies of rotigotine were also evaluated, as well as the main articles that describe methods for assessing their chiral purity. RESULTS: Qualified and unofficial official impurities found in forced degradation studies were verified. The methods presented show adequate specificity and selectivity in determining the drug in the presence of its impurities. CONCLUSIONS: The approached methods are promising, but more detailed studies on the stability of rotigotine are still lacking, mainly in the pharmacokinetic and toxicological characterization of its impurities.

Effects of a novel roflumilast and formoterol fumarate dry powder inhaler formulation in experimental allergic asthma.

In this study we aimed to develop a roflumilast (R) and formoterol fumarate (F) dry powder inhaler formulation (DPI) incorporating HPßCD by spray drying and evaluated if it attenuates the inflammatory process and improves lung function in a murine model of ovalbumin induced allergic asthma. The DPI was characterized by powder X-ray diffraction, thermal analysis, scanning electron microscopy, particle size, density, specific surface area and dynamic vapor sorption analyses. In vitro deposition studies were performed using a NGI, while transepithelial permeability and in vivo effects on lung mechanics and inflammation in a model of allergic asthma were also assessed. The R:F formulation was amorphous with high glass transition temperatures, comprised of wrinkled particles, had low bulk and tapped densities, high surface area, suitable particle size for pulmonary delivery and exhibited no recrystallization even at high relative humidities. MMAD were statistically similar of 4.22 ± 0.19 and 4.32 ± 0.13 µm for F and R, respectively. Fine particle fractions (<5 µm) were of more than 50% of the emitted dose. The R:F formulation led to reduced eosinophil infiltration and airway collagen fiber content, yielding decreased airway hyperresponsiveness. In the current asthma model, the R:F formulation combination decreased inflammation and remodeling, thus improving lung mechanics.

In Vitro-In Vivo Correlation for Desvenlafaxine Succinate Monohydrate Extended Release Tablets.

The objective of this study was to develop a dissolution test in order to establish an in vitro-in vivo correlation (IVIVC) model for desvenlafaxine succinate monohydrate (DVSM) extended release (ER) tablets. The in vitro release characteristics of the drug were determined using USP apparatus 1 at 75 rpm, with volume of HCl pH 1.2, acetate buffer solution (ABS) pH 4.5, or phosphate buffer solution (PBS) pH 6.8. In vivo plasma concentrations and pharmacokinetic parameters in healthy volunteers were obtained from a bioequivalence study. The similarity factors f1 and f2 were used to compare the dissolution data. The IVIVC model was developed using fraction dissolved and fraction absorbed of the reference product. For predictability, the results showed that the percentage prediction error (%PE) value of Cmax was 7.63%. The observed low prediction error for Cmax demonstrated that the IVIVC model was valid for this parameter.

Nanoparticles Loaded with a New Thiourea Derivative: Development and In vitro Evaluation Against Leishmania amazonensis.

BACKGROUND: Leishmaniasis is a neglected tropical disease caused by protozoa of the genus Leishmania. Current treatments are restricted to a small number of drugs that display both severe side effects and a potential for parasites to develop resistance. A new N-(3,4-methylenedioxyphenyl)-N'- (2-phenethyl) thiourea compound (thiourea 1) has shown promising in vitro activity against Leishmania amazonensis with an IC50 of 54.14 µM for promastigotes and an IC50 of 70 µM for amastigotes. OBJECTIVE: To develop a formulation of thiourea 1 as an oral treatment for leishmaniasis, it was incorporated into Nanoparticles (NPs), a proven approach to provide long-acting drug delivery systems. METHODS: Poly (D,L-Lactic-co-Glycolic Acid) (PLGA) polymeric NPs containing thiourea 1 were obtained through a nanoprecipitation methodology associated with solvent evaporation. The NPs containing thiourea 1 were characterized for Encapsulation Efficiency (EE%), reaction yield (% w/w), surface charge, particle size and morphology by Transmission Electron Microscopy (TEM). RESULTS: NPs with thiourea 1 showed an improved in vitro leishmanicidal activity with a reduction in its cytotoxicity against macrophages (CC50>100 µg/mL) while preserving its IC50 against intracellular amastigotes (1.46 ± 0.09 µg/mL). This represents a parasite Selectivity Index (SI) of 68.49, which is a marked advancement from the reference drug pentamidine (SI = 30.14). CONCLUSION: The results suggest that the incorporation into NPs potentiated the therapeutic effect of thiourea 1, most likely by improving the selective delivery of the drug to the phagocytic cells that are targeted for infection by L. amazonensis. This work reinforces the importance of nanotechnology in the acquisition of new therapeutic alternatives for oral treatments.

Vancomycin-loaded nanoparticles against vancomycin intermediate and methicillin resistant Staphylococcus aureus strains.

Bacterial infections represent one of the leading causes of mortality in the world. Among causative pathogens, S. aureus is prominently known as the underlying cause of many multidrug resistant infections that are often treated with the first-line choice antibiotic vancomycin (VCM). Loading antibiotics into polymeric nanoparticles (Np) displays promise as an alternative method to deliver therapy due to the greater access and accumulation of the antibiotic at the site of the infection as well as reducing toxicity, irritation and degradation. The aim of this work was to prepare, characterize and evaluate VCM-loaded nanoparticles (VNp) for use against S. aureus strains. Moreover, conjugation of Nps with holo-transferrin (h-Tf) was investigated as an approach for improving targeted drug delivery. VNp were prepared by double emulsion solvent evaporation method using PLGA and PVA or DMAB as surfactants. The particles were characterized for size distribution, Zeta Potential, morphology by transmission electron microscopy, encapsulation yield and protein conjugation efficiency. Process yield and drug loading were also investigated along with an in vitro evaluation of VNp antimicrobial effects against S. aureus strains. Results showed that Np were spontaneously formed with a mean diameter lower than 300 nm in a narrow size distribution that presented a spherical shape. The bioconjugation with h-Tf did not appear to increase the antimicrobial effect of VNp. However, non-bioconjugated Np presented a minimal inhibitory concentration lower than free VCM against a MRSA (Methicillin-resistant S. aureus) strain, and slightly higher against a VISA (VCM intermediate S. aureus) strain. VNp without h-Tf showed potential to assist in the development of new therapies against S. aureus infections.

Development of a liquid chromatography Q Exactive high resolution mass spectrometry method by the Box-Behnken design for the investigation of sibutramine urinary metabolites.

Sibutramine is cited by the World Anti-Doping Agency as a stimulant. According to the literature, sibutramine is extensively metabolized into N-desmethyl-sibutramine (M1), N-bisdesmethyl-sibutramine (M2) and monohydroxy derivatives of M1 and M2. Therefore, it is important to verify new sibutramine metabolites through current analytical methodologies, such as liquid chromatography coupled to high resolution mass spectrometry (LC-HRMS). Furthermore, the development of a comprehensive approach to investigate sibutramine metabolism can increase the detection window for stimulant misuse and enable advancements in pharmacological studies. This work aimed to develop and evaluate the performance of an LC-HRMS method applying Design of Experiments (DoE) for sibutramine metabolite analysis in human urine. After optimizing the method by DoE, the final chromatographic conditions were based on reversed-phase chromatography using a C18 column with a ramp time of 25 min, a flow rate of 0.17 mL min-1 and a temperature of 50 °C. Mobile phase A consisted of water with 0.1% formic acid and 5 mM ammonium formate, and mobile phase B consisted of methanol with 0.1% formic acid; the initial gradient percent was 15% B, and the injection volume was 5 µL. In addition to the hydroxylated metabolites previously described in human urine, dihydroxy derivatives of M1 and M2 were observed for the first time. These dihydroxy derivative metabolites can be applied as new targets for doping control.

Development of USP Apparatus 3 Dissolution Method with IVIVC for Extended Release Tablets of Metformin Hydrochloride and Development of a Generic Formulation.

Metformin is a euglycemic drug for the treatment of type 2 diabetes mellitus. To date, there are 13 dissolution methodologies described in the U.S. Pharmacopoeia (USP) to evaluate the release profile of metformin from extended-release tablets utilizing either a USP apparatus 1 (basket) or 2 (paddle). In the absence of a protocol for a USP apparatus 3 (reciprocating cylinder), the goal of this work was to develop an in vitro dissolution method for metformin extended-release tablets based on an in vivo-in vitro correlation (IVIVC). Following a systematic evaluation, a final dissolution method, M4, was defined. It applied 30 dips per minute (dpm) over a total period of 10 h into a series of solutions that included 2 h in HCl media (pH 1.2), 1 h in an acetate buffer solution (pH 4.5), 1 h in phosphate buffer solution (PBS) (pH 5.8) and 6 h in PBS (pH 6.8). This method showed a significant IVIVC with a calculated R2 > 0.98 (point-to-point correlation, Level A) and it was successfully used as a tool to assist in the development of generic extended release formulations for metformin consisting of a lipophilic matrix system.

Sensitive detection of topiramate degradation products by high-performance liquid chromatography/electrospray ionization mass spectrometry using ion-pairing reagents and polarity switching.

RATIONALE: The chromatographic analysis of topiramate and its degradation products is challenging due to the absence of chromophoric moieties in their structures, the wide polarity range of the compounds and their ionization differences. This work proposes two new mass spectrometry approaches for evaluating these analytes. METHODS: Based on the calculated experimental limit of detection (LOD), a highly sensitive high-performance liquid chromatography (HPLC) paired-ion electrospray ionization mass spectrometry (PIESI-MS) method was developed for the determination of topiramate inorganic degradation products. The influence of different solvent systems on the LODs for topiramate and its main degradation products was determined in both positive/negative ionization modes. In addition, a HPLC method to analyze both organic and inorganic degradation products was proposed by mass spectrometry with positive/negative ion switching electrospray ionization. RESULTS: A sensitive HPLC/PIESI-MS method was achieved for the efficient separation of topiramate inorganic degradation products. Both sulfate and sulfamate were detected in the positive selected ion monitoring (SIM) mode with an increased sensitivity compared with the negative SIM mode. The HPLC/ESI-MS analysis with positive/negative ion switching allowed the simultaneous separation and detection of the major degradation products of topiramate in a 10-min run using a single column and a single detector. CONCLUSIONS: Two new alternative MS approaches for analyzing the main degradation products of topiramate were developed. The proposed methods are considered advantageous over the existing methods and can be applied to quality control studies of topiramate.

Zebrafish (Danio rerio) water tank model for the investigation of drug metabolism: Progress, outlook, and challenges.

Zebrafish (Danio rerio) water tank (ZWT) approach was investigated as an alternative model for metabolism studies based on six different experiments with four model compounds. Sibutramine was applied for the multivariate optimization of ZWT conditions, also for the comparison of the metabolism among ZWT, humans and mice, beyond for the role of CYP2B6 in ZWT. After the optimization, 18 fish and 168 hours of experiments is the minimum requirement for a relevant panel of biotransformation products. A comparison among the species resulted in the observation of the same hydroxylated metabolites, with differences in metabolites concentration ratio. However, the ZWT allowed tuning of the conditions to obtain a specific metabolic profile, depending on the need. In addition, by utilizing CYP2B6 inhibition, a relevant ZWT pathway for the demethylation of drugs was determined. The stereospecificity of the ZWT metabolism was investigated using selegiline and no racemization or inversion transformations were observed. Moreover, the investigation of metabolism of cannabimimetics was performed using JWH-073 and the metabolites observed are the same described for humans, except for the hydroxylation at the indol group, which was explained by the absence of CYP2C9 orthologs in zebrafish. Finally, hexarelin was used as a model to evaluate studies by ZWT for drugs with low stability. As a result, hexarelin displays a very fast metabolization in ZWT conditions and all the metabolites described for human were observed in ZWT. Therefore, the appropriate conditions, merits, and relevant limitations to conduct ZWT experiments for the investigation of drug metabolism are described.

Blueberry Residue Encapsulation by Ionotropic Gelation.

In the processing of fruits such as blueberry (Vaccinium sp), that has high levels of phenolic acid, the food industry produces tons of organic waste that causes harm to the environment. Encapsulation is a technique used to take advantage of these wastes. Several methods are used to encapsulate substances, among them ionotropic gelation proves to be a simple, precise, efficient and economical method for obtaining particles with encapsulated bioactives. In this manner, the aim of this study was to test sodium alginate as wall material to encapsulate blueberry residue by ionotropic gelation. The microbeads were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD), total phenolic compounds, antioxidant capacity and in vitro dissolution. The results showed that the microbeads had surface invagination; retention of 67.01% of the phenolic compounds after encapsulation and 68.2%, phenolic release 120 min after in vitro dissolution. The results suggest that the tested matrix was suitable for encapsulation. The produced microbeads are promising for applications in food products, once the phenolic compounds present in the blueberry residues were maintained after encapsulation.

Development of a new formulation of roflumilast for pulmonary drug delivery to treat inflammatory lung conditions.

The aim of this study was to develop roflumilast dry powder inhaler (DPI) formulations by spray drying using hydroxypropyl-ß-cyclodextrin (HPßCD) and to determine their suitability for pulmonary delivery. Different feed solution concentrations, solvent systems and spray drying parameters were used to obtain the formulations which were characterized using X-ray powder diffraction, thermal analysis, scanning electron microscopy, particle size distribution, bulk and tapped density, specific surface area, dynamic vapour sorption, in vitro deposition properties using a Next Generation Impactor (NGI) and transepithelial permeability. Microparticles spray dried from ethanol were wrinkled and amorphous, exhibiting high glass transition temperatures while those from methanol:n-butyl acetate consisted of irregularly shaped porous particles partially crystalline. All formulations presented low density, particle size and residual solvent content exhibiting high depositon in the lower stages of the NGI. Mass median aerodynamic diameters (MMADs) were in the range of 3.32-4.49 µm, with high fine particle fractions (FPF < 5 µm). Stability studies demonstrated no significant modifications in the solid-state nature and in the aerolisation performance of the selected formulation which presented a Papp of 8.73 × 10-6 ±â€¯4.70 × 10-7 cm/s. The developed roflumilast DPI formulations have potential therapeutic applications in the treatment of lung diseases.