Pre-implant surgery complexity for achieving implant-supported prosthetic rehabilitation in oligodontia patients: a retrospective study.

INTRODUCTION: Oligodontia is a rare dental developmental pathology that requires prolonged, complex and multidisciplinary treatment. Although bone augmentation is frequently required during a complete implant treatment of oligodontia. Therefore, we evaluated the ability to predict pre-implant surgery complexity based on age, number of missing teeth, and number of implants required to achieve implant-supported prosthetic rehabilitation. MATERIAL AND METHODS: This retrospectively registered study included all patients who underwent surgical treatment for oligodontia in our Oral and Maxillofacial Surgery Department between January 2012 and May 2023. Demographic data, number and location of missing teeth, pre- and per-implant surgical procedures, and the number of planned implants were recorded. A quantitative variable called "complexity score of pre-implant surgery" was created. This 10-point score was calculated by adding one point for each preimplant surgical procedure registered. A simple linear regression was calculated to explain the number of targeted implants based on number of missing teeth. A multiple linear regression model was used to explain the complexity score of pre-implant surgery and age, number of missing teeth and number of targeted implants. RESULTS: 119 oligodontia patients were included in the study. The median number of tooth agenesis was 10. A total of 825 implants were placed, 14 (1.7%) of which failed. A significant regression equation was used (F(1,118) = 1098,338; p < 0.0001) to explain the number of targeted implants based on number of missing teeth, with a R2 of 0.903. A significant regression equation was found (F(3,116) = 107,229; p < 0.0001) to explain the complexity score of pre-implant surgery and age, number of missing teeth and number of targeted implants, with a R2 of 0.735. DISCUSSION: These results based on patient data indicate that age, number of missing teeth and number of targeted implants could reliably explain the complexity of pre-implant surgery.

Biocompatibility and dimensional stability through the use of 3D-printed scaffolds made by polycaprolactone and bioglass-7: An in vitro and in vivo study.

PURPOSE: This experiment aimed to observe the differences in biological properties by producing BGS-7 + PCL scaffolds with different weight fractions of BGS-7 through 3D printing and to confirm whether using the scaffold for vertical bone augmentation is effective. MATERIALS AND METHODS: Cube-shaped bioglass (BGS-7) and polycaprolactone (PCL) scaffolds with different weight fractions (PCL alone, PCL with 15% and 30% BGS-7) are produced using 3D printing. The surface hydroxyapatite (HA) apposition, the pH change, proliferation and attachment assays, and various gene expression levels are assessed. After a 7-mm implant was inserted 3 mm into the rabbit calvaria, vertical bone augmentation is performed around the implant and inside the scaffold in four ways: scaffold only, scaffold+bone graft, bone graft only, and no graft. Sacrifice is performed at 6, 12, and 24 weeks, and the various parameters are compared radiographically and histologically. RESULTS: HA apposition, cell proliferation, cell attachment, and expression of osteogenic genes increase as the proportion of BGS-7 increase. In the in vivo test, a higher bone-implant contact ratio, bone volume ratio, bone mineral density, and new bone area are observed when the scaffold and bone grafts were used together. CONCLUSION: The 3D-printed scaffold, a mixture of BGS-7 and PCL, exhibit higher biological compatibility as the proportion of BGS-7 increase. Additionally, the use of scaffold is effective for vertical bone augmentation.

Introduction and overview on autogenous Platelet concentrates.

This special issue on autologous platelet concentrates (APCs) provides clinicians with an overview on the current understanding of the use of these biomaterials for soft and hard-tissue regeneration. The included papers summarize scientific evidence and the clinical findings, presented in simple tables that outline potential benefits including Patient Reported Outcome Measures (PROMs). This approach enables clinicians to assess clinical relevance and researchers to identify significant gaps in the literature. The first part provides a comprehensive summary of the basic science surrounding APC, with particular focus on their preparation methods. Clear recommendations are outlined, which are crucial for obtaining high-quality APCs, alongside an exploration of how APCs may influence both soft and hard tissue healing processes. Part 2 delves into the clinical evidence for the potential benefits of APCs across a range of applications: alveolar ridge preservation, sinus floor elevation, periodontal plastic surgery, guided tissue regeneration, guided bone regeneration, the healing of Medication-Related Osteonecrosis of the Jaw (MRONJ), and endodontic surgery. In the part 3, the discussion turns to the effects of APCs on the healing of extra-oral wounds, including diabetic foot ulcers, venous leg ulcers, pressure injuries, burns, and more. For those clinicians persuaded by the evidence, the fourth section offers a detailed, step-by-step flowchart for each treatment modality, providing a clear guide for clinical application.

Assessment of the application of a novel three-dimension printing individualized titanium mesh in alveolar bone augmentation: A retrospective study.

OBJECTIVE: To assess the clinical and radiographic outcomes of alveolar ridge augmentation using a novel three-dimensional printed individualized titanium mesh (3D-PITM) for guided bone regeneration (GBR). MATERIALS AND METHODS: Preoperative cone-beam computed tomography (CBCT) was used to evaluate alveolar ridge defects, followed by augmentation with high-porosity 3D-PITM featuring circular and spindle-shaped pores. Postoperative CBCT scans were taken immediately and after 6 months of healing. These scans were compared with preoperative scans to calculate changes in bone volume, height, and width, along with the corresponding resorption rates. A statistical analysis of the results was then conducted. RESULTS: A total of 21 patients participated in the study, involving alveolar ridge augmentation at 38 implant sites. After 6 months of healing, the average bone augmentation volume of 21 patients remained at 489.71 ± 252.53 mm3, with a resorption rate of 16.05% ± 8.07%. For 38 implant sites, the average vertical bone increment was 3.63 ± 2.29 mm, with a resorption rate of 17.55% ± 15.10%. The horizontal bone increment at the designed implant platform was 4.43 ± 1.85 mm, with a resorption rate of 25.26% ± 15.73%. The horizontal bone increment 2 mm below the platform was 5.50 ± 2.48 mm, with a resorption rate of 16.03% ± 9.57%. The main complication was exposure to 3D-PITM, which occurred at a rate of 15.79%. CONCLUSION: The novel 3D-PITM used in GBR resulted in predictable bone augmentation. Moderate over-augmentation in the design, proper soft tissue management, and rigorous follow-ups are beneficial for reducing the graft resorption and the incidence of exposure.

Outcome Difference between Short and Longer Dental Implants Placed Simultaneously with Alveolar Bone Augmentation: a Systematic Review and Meta-Analysis.

Objectives: This systematic review and meta-analysis aim to provide detailed insights into the clinical performance of short and longer dental implants placed simultaneously with bone augmentation. Material and Methods: The search for literature was performed across MEDLINE (PubMed), ScienceDirect and the Cochrane Library databases, adhering to specific selection criteria and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Only articles published in English between 2014 and 2024 were considered for data collection. Primary outcomes were survival rate (SR), marginal bone loss (MBL) and complications. Clinical outcomes were as follows: bleeding on probing (BOP), periodontal pocket depth (PPD), and implant stability quotient (ISQ). Quality and risk of bias assessment were evaluated by the Critical Appraisal Checklist tool for randomized controlled trials developed by the Joanna Briggs Institute. Results: A total of 14678 articles were screened, with 9 meeting the inclusion criteria and being utilized for this systematic review and meta-analysis. A total of 495 patients with 984 implants (491 short and 493 longer implants) showing a SR of 93.91% for the short implants and 91.83% for the longer implants. Meta-analysis revealed statistically significant difference between short implants and longer implants simultaneously placed with alveolar bone augmentation in relation to MBL (-0.513 mm, 95% CI = -0.93 to -0.096; P = 0.02), and in PPD (-0.247, 95% CI = -0.515 to 0.022; P = 0.07). Conclusions: When comparing the results of treatment with short and longer dental implants combined with alveolar bone augmentation, short implants showed better clinical results regarding the parameters of survival rate, marginal bone loss and complications.

Optimizing Denture Success: A Strategy for Prosthodontic Rehabilitation in a Patient With Compromised Alveolar Ridges.

The ill-fitting and unstable complete denture prosthesis is the most commonly faced problem by patients with compromised resorbed ridge. The retention, support, and stability of dentures are compromised in severely resorbed ridges, leading to difficulty in mastication and swallowing. The flabby tissue can be managed by using appropriate mucostatic impression techniques, and severely resorbed ridges can be managed by the coordination of a complete denture prosthesis with the neuromuscular function using a neutral zone for the arrangement of artificial teeth. This case report presents a combination of the Hobkirk technique and the neutral zone concept for the rehabilitation of the flabby tissue and severely resorbed alveolar ridge.

Alveolar ridge preservation in posterior maxillary teeth for reduction in the potential need for sinus floor elevation procedures: A pilot study.

OBJECTIVES: To investigate the effects of alveolar ridge preservation (ARP) on ridge height, sinus pneumatization and the potential need for lateral sinus augmentation following extraction in the posterior maxilla. MATERIALS AND METHODS: This randomized controlled pilot study included 28 patients requiring extraction in the posterior maxilla with bone height between 6 and 8 mm. The sites were randomly allocated to either unassisted socket healing (Control), ARP with deproteinized bovine bone mineral (DBBM) (Test 1), or collagen-stabilized DBBM (Test 2) groups. Pre- and post-operative CTs at 4 months were taken to determine changes in ridge heights, sinus volume, and the need for sinus floor elevation (SFE) procedures for cases where the residual mid-ridge height was < 5 mm. Site-level analyses for changes in vertical ridge dimensions and sinus volume pre- and post-extraction/ARP were conducted using paired t-tests. Differences in mean changes in vertical ridge dimensions and sinus volume between the groups were determined using one-way ANOVA. RESULTS: Significantly greater mean mid-ridge height reduction occurred in the control group (-2.7 ± 0.9 mm) compared to Test 1 (0.9 ± 3.7 mm) and Test 2 (1.0 ± 2.8 mm) groups (p < .05). No significant changes in mean mid-ridge height were found in either test groups. Volumetric analysis showed a significantly greater increase in sinus volume in the control group (0.7 ± 0.7 cm3) compared to Test 1 (n = 3, -0.7 ± 0.8 cm3) group (p = .03). 89% of patients in the control group would require lateral window SFE  compared to Test 1 (42.8%) and Test 2 (40%) groups. CONCLUSION: ARP was effective in attenuating height changes in the middle of the ridge and may reduce sinus pneumatization following extraction in the posterior maxilla. This could potentially decrease the need for more invasive sinus augmentation procedures.

Healing patterns of alveolar bone following ridge preservation procedures.

OBJECTIVES: Examine the histomorphometric bone composition, following alveolar ridge preservation techniques and unassisted socket healing. MATERIALS AND METHODS: Forty-two patients (42) requiring a single rooted tooth extraction were randomly allocated into three groups (n = 14 per group): Group 1: Guided Bone Regeneration (GBR) using deproteinised bovine bone mineral (DBBM) and a porcine collagen membrane; Group 2: Socket Seal (SS) technique using DBBM and a porcine collagen matrix; Group 3: Unassisted socket healing (Control). Trephined bone biopsies were harvested following a 4-month healing period. Forty-two samples underwent Back-Scattered Electrons -Scanning Electron Microscopy (BSE-SEM) imaging, with 15 samples examined using Xray Micro-Tomography (XMT) (n = 6 for each GBR/SS and n = 3 Control). Images were analysed to determine the percentage (%) of connective tissue, new bone formation, residual DBBM particles and direct bone to DBBM particle contact (osseointegration). RESULTS: BSE-SEM analysis demonstrated that new bone formation was higher in the Control (45.89% ± 11.48) compared to both GBR (22.12% ± 12.7/p < .004) and SS (27.62% ± 17.76/p < .005) groups. The connective tissue percentage in GBR (49.72% ± 9), SS (47.81% ± 12.57) and Control (47.81% ± 12.57) groups was similar. GBR (28.17% ± 16.64) and SS (24.37% ± 18.61) groups had similar levels of residual DBBM particles. XMT volumetric analysis indicated a lower level of bone and DBBM particles in all test groups, when matched to the BSE-SEM area measurements. Osseointegration levels (DBBM graft and bone) were recorded at 35.66% (± 9.8) for GBR and 31.18% (± 19.38) for SS. CONCLUSION: GBR and SS ARP techniques presented with less bone formation when compared to unassisted healing. GBR had more direct contact/osseointegration between the DBBM particles and newly formed bone.

Inverted bone block for a mandibular lateral ridge augmentation: A case report.

The purpose of this report is to describe an original technique for bone grafting using an inverted autogenous bone block taken from the same edentulous site that was to be implanted. A 54-year-old female presented for replacement of a missing lower premolar. Clinical and radiographical assessments revealed a deficiency in the width of the alveolar ridge. It was decided to expand the edentate area using an inverted bone block. The graft was harvested from the same edentate site that was to be implanted. The crestal bone width after nine months of healing was increased, and an implant was placed. An autogenous inverted bone block can be used as a bone grafting procedure to augment some bone-deficient sites prior to dental implantations. This novel technique provides an autogenous bone without the complexity of having a second surgical site. This technique can be used in specific situations when there is proper bone anatomy.

Alveolar ridge preservation and its impact on marginal bone level changes around dental implants: A retrospective, cohort comparative study.

OBJECTIVES: This retrospective study compared the outcomes of implants placed in alveolar ridge preservation (ARP) treated sites with those in spontaneously healed (SH) sites. MATERIALS AND METHODS: The study included patients presenting with one implant placed in an ARP-treated socket and one in an SH site. The primary outcome was the comparison of Marginal Bone Level Changes (MBLC). Statistical analysis was performed to identify factors influencing MBLC, including age, gender, smoking, parafunctional habits, and prosthetic emergence angle. RESULTS: Of these, 28 patients (23 females, 82.1%) were included in this analysis. Sockets in the SH group were classified as type I, whereas type II sockets were more common in the ARP group. The SH group exhibited significantly higher MBLC than the ARP group (p = 0.032), with values, respectively, of 1.00 [0.25; 1.62] and 0.40 [0.00; 1.00] mm. Among all evaluated parameters, the performance of ARP was the only factor significantly affecting MBLC (ß = -0.72, SE: 0.32, p = 0.026). Age, gender, smoking, parafunctional habits, and prosthetic emergence angle did not significantly affect MBLC. CONCLUSIONS: The study shows the potential role of ARP in maintaining stable marginal bone levels around implants. In our sample, ARP significantly reduced MBLC compared with spontaneous healing, highlighting its possible impact in clinical practice for better peri-implant bone stability.

Evaluation and comparison of autologous particulate dentin with demineralized freeze dried bone allograft in ridge preservation procedures - a prospective clinical study.

OBJECTIVES: To compare effectiveness of Autologous Particulate Dentin (APD) with Demineralized Freeze-Dried Bone Allograft (DFDBA) in ridge preservation, using radiographic and clinical parameters. MATERIALS AND METHODS: Thirty subjects with indication of mandibular posterior teeth extraction were randomly assigned to either test or control group. After atraumatic extraction, ridge preservation was performed using APD or DFDBA mixed with i-PRF in test and control groups respectively. Both groups had sockets sealed with A-PRF membrane. Clinical parameters (plaque, gingival and healing indices) and radiographic parameters (vertical ridge height, horizontal ridge width) were assessed at baseline and 6 months using CBCT. Statistical analysis was performed using an independent t-test to compare clinical and radiographic parameters between the groups. RESULTS: Both groups had significant decreases in ridge dimensions over 6 months (p < 0.001). The test group showed less reduction in ridge dimensions than control group at 6 months (p < 0.001). Mean change in vertical height was not significant (1.37 ± 1.32, 1.7311 ± 0.563), but in horizontal ridge width (1.3120 ± 1.13, 1.8093 ± 1.16) was significantly different between test and control groups respectively. There was no statistical difference in clinical parameters between the groups at 6 months (p > 0.001). CONCLUSIONS: APD grafts resulted in significant improvements in radiographic parameters, specifically in vertical ridge height and horizontal ridge width, compared to DFDBA group. CLINICAL RELEVANCE: Autologous particulate dentin is a promising, versatile substitute for regenerative procedures. While more research on its long-term efficacy and application is needed, current evidence suggests it could significantly improve patient care and outcomes.

Iliac crest vertical block grafts -placing outside or inside the bone contour: A cohort study.

OBJECTIVE AND AIM: Challenging defect configurations and dimensions arise from severe, localized vertical alveolar ridge defects caused by trauma or prior surgery. This study aims to analyze three-dimensional bone gain, assess marginal bone stability in such defect configurations, and evaluate the impact of grafting outside the bone contour on the overall outcome, with a focus on iliac crest block grafts as a valid treatment option. MATERIALS AND METHODS: The prospective cohort study evaluated patients who required vertical block grafting due to localized bone defects in the maxilla or mandible and who had received iliac grafts. Three-dimensional bone gain was analyzed using cone beam computed tomography (CBCT) after 3 months of bone healing for each treated site and implant position. A comparison between bone grafts inside and outside the bone contour was conducted. Marginal bone stability was measured using intraoral radiographs during routine annual follow-up visits. RESULTS: Seventy patients with 89 treated sites were evaluated. After 3 months of graft healing, the mean vertical bone gain was 11.03 ± 3.54 mm, the mean horizontal bone gain was 7.18 ± 2.00 mm, and the mean graft length was 28.19 ± 11.01 mm. A total of 217 implants were placed in the augmented regions. On implant level, a mean vertical bone gain of 10.44 ± 3.44 mm and a mean horizontal bone gain of 6.54 ± 1.86 mm were measured. Over a 43-month observation period, mesial and distal marginal bone loss averaged 0.44 ± 0.92 mm and 0.49 ± 1.05 mm, respectively. Eight implants were diagnosed with periimplantitis, resulting in the loss of four implants, while no early implant losses were reported. CONCLUSION: Within the limitations of this study, vertical bone grafts with iliac crest block grafts were found to be a dependable treatment option for dental implant placement, and placing block grafts outside the bone contour did not lead to inferior outcomes.

Comparative Effectiveness of an Autologous Dentin Matrix for Alveolar Ridge Preservation.

An urgent issue is the preservation or reconstruction of the volume of bone tissue in planning and surgical treatment in the fields of medicine, such as traumatology, orthopedics, maxillofacial surgery and dentistry. After tooth extraction, resorption of the bone tissue of the alveolar crest of the jaws occurs, which must either be further eliminated by performing additional operations or using osteoplastic material for socket preservation at the extraction stage. Background and Objectives: The aim of the study was a comparative analysis of various osteoplastic materials used to preserve the volume of bone tissue in the preimplantation period. Materials and Methods: As part of the study, 80 patients were treated, who underwent socket preservation using xenografts, plasma enriched with growth factors, an autologous dentin matrix (ADM) and hydroxyapatite. Results: The results of the treatment 16 weeks after removal were comprehensively analyzed using a morphometric analysis of the bone's volume, cone beam tomography and morphological examination of burr biopsy specimens, as well as by determining the stability of the installed implant at different stages of treatment. Conclusions: The lowest level of bone tissue resorption according to the CBCT data was noted in the ADM and xenograft groups. It should be noted that the use of osteoplastic material in jaw surgery when reconstructing alveolar defects is an essential procedure for preventing the atrophy of bone tissue.

Assessment of soft and hard tissue changes following micro crestal flap-Alveolar ridge preservation and augmentation at molar extraction sites in patients with stage III/IV periodontitis: A randomized controlled trial.

AIM: This study aimed to assess hard and soft tissue contour changes following micro crestal flap-alveolar ridge preservation (MCF-ARP) and natural healing (NH) in periodontally compromised molar extraction sites and to analyse the feasibility and need for bone augmentation during implant therapy. MATERIALS AND METHODS: Fifty-six patients with 70 sites were randomized into two groups at the site level (35 sites from 31 patients in the test group and 35 sites from 29 patients in the control group). Among whom, four patients contributed one tooth to the control group and one tooth to the test group. Hard tissue indicators were measured using cone beam computed tomography performed before tooth extraction and 6 months after surgery. Soft tissue contour changes were assessed using intraoral scanning performed before and immediately after surgery and also 2 weeks and 1, 3 and 6 months after surgery. RESULTS: Six months after surgery, the MCF-ARP group showed less resorption in buccal bone height (p = .032) and greater augmentation in central bone height (p = .001) and ridge width (p = .009). The mean, vertical and horizontal collapse of buccal soft tissue contour in the MCF-ARP group were 0.95 mm (p = .010), 0.61 mm (p = .019) and 0.56 mm (p = .013) less than that in the NH group, respectively. There were significantly (p = .007) fewer sites in the MCF-ARP group than in the NH group (0% vs. 26.7%) for staged bone augmentation and more sites that could be treated with simple implant procedure in the MCF-ARP group than in the NH group (71.9% vs. 56.6%). CONCLUSIONS: Compared with NH, MCF-ARP reduced bone resorption in periodontally compromised molar extraction sites and maintained the buccal soft tissue contour. MCF-ARP reduces the need for complex bone augmentation procedures in implant therapy. TRIAL REGISTRATION: Chinese Clinical Trial Register (ChiCTR) ChiCTR2200056335. Registered on 4 February 2022, Version 1.0.

Concentrated growth factor and collagen as barrier materials in alveolar ridge preservation for posterior teeth: a prospective cohort study with one-year follow-up.

OBJECTIVES: This study aims to evaluate the efficacy of concentrated growth factor (CGF) membrane and collagen as barrier materials in sealing the alveolar socket in alveolar ridge preservation (ARP) in the posterior region during a one-year follow-up. METHODS: A total of 24 patients who underwent ARP in the posterior region were selected for inclusion and randomly assigned to the CGF group (12 cases) and Collagen group (12 cases). The patients in both groups underwent extraction of posterior teeth. The extraction sockets were filled with a bone substitute to the level of the pre-extraction buccal and lingual or palatal alveolar bone plates. The wounds in the CGF group were closed with a fabricated CGF overlaying the upper edge of the bone substitute material, whereas those in the Collagen group were closed with Bio-Oss Collagen. The implants were placed after 6 months. The evaluation was based on implant retention, re-grafting rate, and vertical and horizontal alveolar ridge bone volume changes measured by cone beam computed tomography (CBCT). Data were statistically analyzed using SPSS 28.0 software. RESULTS: No patient withdrew throughout the follow-up period. No implant failure and no severe peri-implant or mucosal soft tissue complications were observed. Six months after the operation, the degree of vertical alveolar ridge height resorption in the CGF group was lower than that in the Collagen group (P<0.05). There were no statistically difference between the groups at 1 year after the operation (P>0.05). The amount of bone reduction in horizontal alveolar ridge width showed no difference between the groups at 6 months and 1 year after surgery (P>0.05). CONCLUSIONS: CGF membrane and Bio-Oss Collagen as barrier materials for posterior ARP inhibited reduction in alveolar ridge bone mass.

Four locator attachments of mandibular implant-retained overdentures with two different distributions: A 10-year retrospective preliminary study of residual alveolar ridge changes.

OBJECTIVES: There is little information on the long-term function of the four Locator attachment of the mandibular implant retained overdenture (OD), particularly with different distributions. PURPOSE: To compare the effect of different four inter-foraminal implant distributions retaining a mandibular OD after 10 years of function on posterior mandibular ridge resorption (PMandRR), anterior maxillary ridge resorption (AMaxRR), and the amount of marginal bone loss (MBL) around all four implants. MATERIALS AND METHODS: Twenty-two participants with total edentulism who had worn mandibular OVDs retained by four inter-foraminal implants for 10 years of functional life were selected for this study. They were divided into two groups based on implant distribution: Group I with a quadrilateral distribution (QD) of implants and Group II with a linear distribution (LD) of implants. PMandRR, AMaxRR, and MBL around implants were measured. RESULTS: After 10 years of function, PMandRR was significantly higher in the LD group than in the QD group (p < 0.001*). There was no significant difference in AMaxRR between the QD and LD groups (p = 0.431). The QD group showed a significantly greater amount of MBL around dental implants when compared with the LD group (p = 0.002*). CONCLUSIONS: The LD of implants demonstrates more PMandRR compared with the QD. The QD of implants demonstrates a greater amount of MBL around dental implants compared with the LD. Both implant distributions demonstrate the same effect on the AMaxRR. MBL around implants remained within normal accepted values after 10 years of function.

Efficacy of Platelet-Rich Fibrin in Preserving Alveolar Ridge Volume and Reducing Postoperative Pain in Site Preservation of Post-Extracted Sockets.

Background and Objectives: In socket preservation, the goal is to minimize bone resorption after tooth extraction to maintain the volume and contour of the alveolar ridge. The use of PRF in post extraction sites may reduce ridge resorption by encouraging the growth of new bone and acting as a scaffold for tissue. In addition, PRF may enhance healing and minimize postoperative pain. The aim of this study was to evaluate the effectiveness of platelet-rich fibrin (PRF) in maintaining the ridges' dimensions at the extraction site, in the maxilla and mandible, as well as its impact on post-extraction discomfort. Methods: The study was conducted on 60 patients presenting for extraction of posterior teeth and was randomly divided into three groups: group I PRF (n = 20), group II PRF + collagen (n = 20), and group III control (n = 20). Sockets were filled with PRF (group I) and PRF + collagen (group II). At baseline and follow-up after 3 months, CBCT was used to assess the bone dimensions. The postoperative pain evaluations were performed at 24 h, 3 days, and 7 days after the tooth extraction. The pain rate was evaluated using a numerical rating scale from the British Pain Society. Results: The study examined the effects of platelet-rich fibrin (PRF) and PRF combined with collagen on the height and width of the ridges, as well as the pain experienced by the patients following alveolar ridge preservation surgery. ANOVA and t-tests were used to evaluate and compare the ridge dimensions. Comparing the results to the control group, there were no significant differences in the height or width of the ridges. However, both the PRF and PRF + Collaplug® treatments effectively reduced the short-term postoperative pain. Conclusions: The study findings suggest that platelet-rich fibrin (PRF) and PRF combined with collagen do not exert significant effects on ridge width and height compared to the standard treatment following alveolar ridge preservation. However, it is noteworthy that both the PRF and PRF + collagen treatments demonstrated efficacy in reducing postoperative pain in the short term, offering a potential advantage over standard treatment protocols.

Large Peripheral Osteomas and Dental Implants: A Case Report.

Peripheral osteoma of the jaw is a rare, benign, slow-growing lesion, which usually appears as a unilateral, pedunculated, radiopaque mass protruding from the periphery and is generally solitary. Multiple osteomas without any syndromic involvement are rare. In the present case, a 75-year-old male patient underwent implant placement in the edentulous posterior ridges of the maxilla and mandible. Over 7 years, multiple masses gradually proliferated in the buccal bone of the implant in three different sextants of the posterior region, reaching a size of 2.0 cm. Clinically and radiologically, these lesions were presumed to be peripheral osteomas and were surgically removed because the large mass made self-performed oral hygiene and maintenance of peri-implant health difficult. The histopathological evaluation confirmed that peripheral osteomas were both compact and cancellous. The patient did not exhibit any other clinical manifestations of Gardner syndrome. Whether dental implant placement and loading are involved in the occurrence of peripheral osteomas is unclear, but they might have affected the consistent growth of the mass as a reactive mechanism. After resection, the functional abilities of chewing and self-cleansing significantly improved. No recurrence of peripheral osteoma was observed after 1 year of follow-up, and peri-implant health was well maintained. Within the limitations of the present case report, multiple peripheral osteomas can occur adjacent to dental implants without any syndromic issues, and a large mass of PO can harm peri-implant health which requires surgical removal. It is speculated that dental implants may be associated with the slow and consistent growth of PO.

New Guidelines for the Treatment of the Alveolar Septum in Immediate Dentoalveolar Restoration Technique Associated with Osseodensification: A Case Series.

BACKGROUND: Achieving initial implant stability at the molar extraction site can be challenging due to bone width, quality, and anatomical limitations like the maxillary sinus and inferior alveolar nerve. The implant placement should achieve precise centralization with the interradicular septum to facilitate implant stabilization and preservation/regeneration of the alveolar ridge post-extraction with bone grafting. Immediate non-occlusal crown placement aids peri-implant tissue maturation for the desired outcome. This retrospective series introduces guidelines for treating sockets with alveolar septum types. The approach involves immediate dentoalveolar restoration (IDR) and osseodensification (OD) with an autogenous graft for bone preservation. METHODS: A new protocol for the treatment of the molar interradicular septum during immediate implant placement and/or alveolar ridge preservation/reconstruction was applied in 12 cases. Preoperative and postoperative cone-beam computed tomographic examinations were performed. Socket width was measured and compared between timepoints. RESULTS: The mean preoperative and postoperative (mean, 23.58 ± 9.70 months) socket widths were 9.51 ± 0.40 and 11.16 ± 0.30 mm, respectively (17.35% increase; p <0.05). CONCLUSION: IDR with OD is a predictable approach to the treatment of molar sockets during implant placement.

Alveolar Ridge Preservation Using a Novel Species-Specific Collagen-Enriched Deproteinized Bovine Bone Mineral: Histological Evaluation of a Prospective Case Series.

In recent years, the significance of maintaining the alveolar ridge following tooth extractions has markedly increased. Alveolar ridge preservation (ARP) is a commonly utilized technique and a variety of bone substitute materials and biologics are applied in different combinations. For this purpose, a histological evaluation and the clinical necessity of subsequent guided bone regeneration (GBR) in delayed implantations were investigated in a prospective case series after ARP with a novel deproteinized bovine bone material (95%) in combination with a species-specific collagen (5%) (C-DBBM). Notably, block-form bone substitutes without porcine collagen are limited, and moreover, the availability of histological data on this material remains limited. Ten patients, each scheduled for tooth extraction and desiring future implantation, were included in this study. Following tooth extraction, ARP was performed using a block form of C-DBBM in conjunction with a double-folded bovine cross-linked collagen membrane (xCM). This membrane was openly exposed to the oral cavity and secured using a crisscross suture. After a healing period ranging from 130 to 319 days, guided trephine drilling was performed for implant insertion utilizing static computer-aided implant surgery (s-CAIS). Cores harvested from the area previously treated with ARP were histologically processed and examined. Guided bone regeneration (GBR) was not necessary for any of the implantations. Histological examination revealed the development of a lattice of cancellous bone trabeculae through appositional membranous osteogenesis at various stages surrounding C-DBBM granules as well as larger spongy or compact ossicles with minimal remnants. The clinical follow-up period ranged from 2.5 to 4.5 years, during which no biological or technical complications occurred. Within the limitations of this prospective case series, it can be concluded that ARP using this novel C-DBBM in combination with a bovine xCM could be a treatment option to avoid the need for subsequent GBR in delayed implantations with the opportunity of a bovine species-specific biomaterial chain.