Step-cut osteotomy for cubitus varus deformity with application of patient-specific instrument in children: a preliminary report.

PURPOSE: The step-cut osteotomy has been recognized as a valuable approach for addressing cubitus varus deformity, albeit one that necessitates technical proficiency. This study aims to evaluate the efficacy of the modified step-cut osteotomy technique in conjunction with patient-specific instruments by clinical and radiological assessment. METHODS: We conducted a retrospective review of patients who underwent modified step-cut osteotomy with the use of patient-specific instruments in conjunction with Kirschner wires fixation for the correction of cubitus varus deformity between April 2016 and April 2022. Follow-up was performed for a minimum of two years, during which pre-operative and post-operative clinical and radiological parameters were compared. RESULTS: Fifteen patients were enrolled in this study. The mean pre-operative humeral-elbow-wrist (HEW) of the affected side was -21.7° (ranging from -14° to -34°), while the normal side was 9.4° (ranging from 5° to 15°). The post-operation HEW of affected side was 9° (ranging from 4° to 16°). There was no significant difference between the normal side and affected side after operation (p = 0.74). Pre-operative range of motion in the affected side was 130°, while the post-operative range of motion was 132°. Fourteen patients (93.3%) were pleased with the overall appearance of their elbow. None lazy-S deformity was observed in these cases. There were no major complications. CONCLUSION: The modified step-cut osteotomy technique, utilizing patient-specific instrument in conjunction with Kirschner wires fixation was found to be a safe, reliable, and technically easy procedure for correcting cubitus varus deformity.

Design and application of a novel 3D printing digital navigation template for cubitus varus deformity in children.

Background: This study was aimed to assess the feasibility and efficacy of 3D printing digital template for treatment of cubitus varus deformity. Methods: 32 patients who underwent lateral closing osteotomy were evaluated between January 2018 and January 2020 in this retrospective study. Navigation templates were used in 17 cases, while conventional surgery in 15 cases. The carrying angles before and after surgery, operation time and elbow joint function were compared. Results: Navigation templates matched well with the anatomical markers of the lateral humerus. More accurate osteotomy degrees, shorter operation time and less radiation exposure were achieved in the navigation template group (p < 0.05). At the last follow-up time, significant difference was found based on the Bellemore criteria (p = 0.0288). Conclusions: The novel navigation template can shorten operation time, improve the lateral closing osteotomy accuracy and improve postoperative elbow joint function.

[Incorrectly healed supracondylar humerus fracture : That will grow out later on?!] / Fehlverheilte suprakondyläre Humerusfraktur : Das wächst sich schon noch aus?!

The supracondylar humerus fracture is the most frequent fracture of the elbow region during the growth period. The peak age is around 5 years. Extension fractures predominate. The clinical diagnostics are supplemented by X­ray images in two projections. Growth-associated spontaneous corrections of posttraumatic deformities rarely occur. The goal of treatment is therefore the active transformation of every displaced fracture into a nondisplaced stably fixed fracture.If this is not successful, the consequences of healing in a malalignment can be, e.g., restriction of elbow flexion due to remaining antecurvation or cubitus varus. Combinations are often present. The causes include technical problems with reduction and retention but also misjudgement of the X­ray findings, ignorance of the growth prognosis or inadequate verification of whether the treatment goal has been achieved.Unsatisfactory treatment results should be corrected as early as possible. This can be done primarily before bony healing is completed or secondarily as a corrective osteotomy at any later point in time. The earlier the correction of the malalignment is performed, the greater the chances of a complete restoration to the original condition. Depending on the type and extent of the deformity various techniques for corrective osteotomy are suggested in the literature.

Three-dimensional corrective osteotomy for cubitus varus deformity using patient-matched instruments.

Background: Various methods of two or three-dimensional (3D) corrective osteotomy for cubitus varus deformity have been reported. However, whether 3D correction of cubitus varus deformity is necessary is controversial because of technical difficulties and surgical complications. This study introduced 3D simulations and printing technology for corrective osteotomy against cubitus varus deformities. Moreover, recent studies on the application of these technologies were reviewed. Methods: The amount of 3D deformity was calculated based on the difference in 3D shape between the affected side and the contralateral normal side. Patient-matched instruments were created to perform the actual surgery as simulated. Further, a 3D corrective osteotomy was performed using patient-matched instruments for cubitus varus deformity in pediatric and adolescent patients. The humerus-elbow-wrist angle, tilting angle, and elbow ranges of motion were evaluated. Results: Humerus-elbow-wrist angle and tilting angle were corrected from -21° to 14° and from 30° to 43°, respectively, in the pediatric patient and from -18° to 10° and from 20° to 40°, respectively, in the adolescent patient. The elbow flexion and extension angles changed from 130° to 140° and from 20° to 10°, respectively, in the pediatric patient and from 120° to 130° and from 15° to 0°, respectively, in the adolescent patient. Conclusion: The 3D computer simulations and the use of patient-matched instruments for cubitus varus deformity are reliable and can facilitate an accurate and safe correction. These technologies can simplify the complexity of 3D surgical procedures and contribute to the standardization of treatment for cubitus varus deformity.

Cubitus varus deformity following paediatric supracondylar humeral fracture remodelling predominantly in the sagittal direction: A three-dimensional analysis of eighty-six cases.

PURPOSE: Three-dimensional (3D) capacity for remodelling in cubitus varus deformity (CVD) after paediatric supracondylar humeral fractures (PSHFs) remains unelucidated. This study investigated remodelling patterns after PSHFs by examining 3D deformity distribution over time after injury. METHODS: Computed tomography (CT) data of 86 patients with CVD after PSHFs were analysed. The 3D deformity angles in the sagittal, coronal, and axial directions were assessed and correlated with the duration between the age at injury and CT evaluation. For the subgroup analysis, we performed the same correlation analysis in a younger (< 8 years old) and an older group (≥ 8 years old); we categorized the duration into early (< 2 years), middle (≥ 2 to < 5 years), and late periods (≥ 5 years) and compared the deformity angles of each direction among the three groups. RESULTS: Sagittal deformity showed a moderate correlation with the duration of deformity (r = -0.54; P < 0.001), while coronal and axial deformities showed a negligible correlation. Sagittal deformity showed moderate correlations with the duration in the younger group (r = -0.62; P < 0.001) and weak correlations in the older group (r = -0.37; P = 0.091). In the sagittal direction, the deformity angle in the early period was significantly larger than those in the mid and late periods (P < 0.001). However, there were no significant differences among the three groups in the coronal and axial directions. CONCLUSION: Sagittal deformities in CVDs are capable of remodelling, especially in the early period and at a younger age, whereas coronal and axial deformities are less likely to undergo remodelling.

[Comparative study of external fixator combined with Kirschner wire fixation and Kirschner wires fixation in treatment of cubitus varus deformity in children].

Objective: To analyze the effectiveness comparison of external fixator combined with Kirschner wire fixation and Kirschner wire fixation in the treatment of cubitus varus deformity in children. Methods: A retrospective case-control study was conducted to collect 36 children of postoperative supracondylar humerus fracture complicating cubitus varus deformity between January 2018 and July 2022. Among them, 17 cases were treated with distal humeral wedge osteotomy external fixation combined with Kirschner wire fixation (observation group), and 19 cases were treated with distal humeral wedge osteotomy and Kirschner wire fixation (control group). The baseline data including age, gender, deformity side, time from fracture to operation, carrying angle of the healthy side and preoperative carrying angle of the affected side, elbow flexion and extension range of motion, and lateral condylar prominence index (LCPI) showed no significant difference between the two groups ( P>0.05). The operation time, hospitalization cost, healing time of osteotomy, postoperative complications, and the carrying angle, LCPI, and elbow flexion and extention range of motion were recorded and compared between the two groups. The elbow function was assessed by Oppenheim score at 3 months after operation and at last follow-up. Results: The children in both groups were followed up 13-48 months, with an average of 26.7 months. There was 1 case of needle tract infection in the observation group and 2 cases in the control group, and no nerve injury occurred, the difference in the incidence of complication (5.88% vs 10.53%) between the two groups was not significant ( χ 2=0.502, P=0.593). There was no significant difference in the operation time and fracture healing time between the two groups ( P>0.05); the hospitalization cost of the observation group was significantly higher than that of the control group ( P<0.05). The Oppenheim score of the observation group was significantly better than that of the control group at 3 months after operation ( P<0.05), but there was no significant difference in the Oppenheim score between the two groups at last follow-up ( P>0.05). At last follow-up, the carrying angle of affected side significantly improved in both groups when compared with preoperative ones ( P<0.05); the differences of the pre- and post-operative carrying angle of affected side and elbow flexion and extension range of motion showed no significant differences between the two groups ( P>0.05), but the difference in pre- and post-operative LCPI of the observation group was significantly better than that of the control group ( P<0.05). Conclusion: External fixator combined with Kirschner wire fixation and Kirschner wire fixation both can achieve satisfactory correction of cubitus varus deformity in children, and the former can achieve better short-term functional recovery of elbow joint and reduce the incidence of humeral lateral condyle protrusion.

Lateral Collateral Ligament Reconstruction Using the Triceps Brachii Fascia for Posterolateral Rotatory Instability in Cubitus Varus: A Report of Two Cases.

A combination of osteotomy and ligament reconstruction is recommended for posterolateral rotatory instability (PLRI) with large cubitus varus deformities. There is a lack of reports regarding ligament donor selection for ligament reconstruction of PLRI with cubitus varus. Two cases of PLRI with cubitus varus have been described. In case one, a 40-year-old woman presented with left elbow pain. She had a cubitus varus deformity, resulting from a childhood elbow fracture. Radiographs showed an 18-degree cubitus varus deformity. A lateral closing wedge osteotomy and double plate osteosynthesis were performed. The lateral collateral ligament (LCL) was reconstructed with autologous triceps fascia. Postoperative radiographs confirmed correction with 10 degrees of the carrying angle (CA). Bone union at the osteotomy site occurred six months later with excellent results. In case two, a 45-year-old man presented an arm with persistent right elbow instability with cubitus varus deformity. This was due to a childhood supracondylar fracture of the right humerus. Radiographs showed a cubitus varus deformity of 25 degrees on the right. The surgical procedure included a lateral wedge osteotomy, double plate fixation, and LCL reconstruction with autologous triceps fascia. Postoperative radiographs confirmed a corrected CA of 5 degrees. Bone union was achieved at the six-month follow-up with satisfactory results. The use of triceps fascia for LCL reconstruction for PLRI due to cubitus varus would provide a minimally invasive and reasonable treatment option.

Locking plate versus K-wires and cast fixation in lateral closing-wedge osteotomy for cubitus varus deformity.

Background: The aim of this study was to assess the clinical and radiographic outcomes of cubitus varus treatments based on different fixation methods: Locking plate vs. Kirschner-wires (K-wires) and cast fixation. Methods: This retrospective study of 28 patients was performed in lateral-wedge osteotomy for cubitus varus deformity in our hospital from July 2018 to July 2020. 14 patients in group A were treated by locking plate after lateral closing-wedge osteotomy, whereas other 14 patients were treated by K-wires in group B. We measured the bony union and carrying angle. The clinical and radiographic outcomes were assessed according to the Bellemore criteria. Results: No nonunion, neurovascular injury or myositis ossificans was noted at follow-up. In group A, 1 patient with lateral condylar prominence was found. In group B, 2 patients with pinning site infection were treated successfully with oral antibiotics and 2 patients needed revision surgery for residual varus. According to the Bellemore criteria, statistically significant difference was noted between the two groups (P = 0.0458). In the present study, no statistically significant difference was noted in the length of incision and operation time between the 2 groups (P > 0.05). However, the postoperative carrying angle was significantly different at final follow-up between the 2 groups (P < 0.01). Conclusions: Compared with K-wires and cast fixation, we recommend the wedge osteotomy with lateral locking plate to treat the cubitus varus deformity because locking plate could achieve better functional and cosmetic results and stabilize the distal humerus rigidly.

A systematic review of techniques for step cut osteotomy in cubitus varus: A comprehensive analysis.

Background: Cubitus varus, a common post-traumatic deformity of the elbow in children, poses challenges for both patients and surgeons. Step cut osteotomy has emerged as a reasonable surgical technique to address this condition, offering multiple approaches and modifications. Methods: We present a comprehensive systematic review of techniques for step cut osteotomy in cubitus varus, analyzing 13 studies that meet our inclusion criteria. These studies encompass diverse patient populations, including pediatric and adult cases, and span different geographical regions. Results: Our systematic review explores three primary osteotomy techniques-Classic Step-Cut Osteotomy, Reverse V Osteotomy, and Modified Step Cut Osteotomy-along with their modifications, providing surgeons with valuable options for individualized correction. Functional outcomes showcase improvements in range of motion, functional scores, and carrying angle, highlighting the technique's efficacy in restoring elbow function and enhancing quality of life. Radiological evaluations demonstrate successful corrections of various angles and achievement of bony union, reinforcing the stability and anatomical improvements achieved through step cut osteotomy. Conclusions: Complication rates are notably low, with transient nerve palsies being the most commonly encountered, often resolving within months. Implant failure and other complications are infrequent, underlining the safety and reliability of step cut osteotomy as a surgical intervention for cubitus varus.While the predominance of retrospective studies and heterogeneity across included studies warrant caution, our systematic review provides a robust and diverse synthesis of evidence. It underscores the significance of step cut osteotomy in managing cubitus varus deformity, emphasizing its versatility, favourable outcomes, and safety profile. Further research with rigorous designs and longer follow-up periods will enhance our understanding of step cut osteotomy's role in cubitus varus correction.

Osteotomías correctoras en secuelas de fracturas supracondíleas de codo en la población pediátrica: revisión bibliográfica sistematizada / Corrective osteotomies in sequelae of supracondylar elbow fractures in the pediatric population: systematized bibliographic review / Osteotomias corretivas em sequelas de fraturas supracondilianas do cotovelo na população pediátrica: revisão bibliográfica sistemática

El cubito varo es la secuela más frecuente en las fracturas supracondíleas de humero en la población pediátrica, objetivo analizar los diferentes tipos de osteotomías y los métodos fijación para el tratamiento de estas lesiones. Materiales y métodos: se realizo una búsqueda bibliográfica utilizando como motor de búsqueda la plataforma Pubmed y OVID, las palabras claves fueron Cubitus AND varus AND osteotomy. Resultados: se seleccionaron 13 artículos, con un N de 237 pacientes, follow-up de 30 meses, edad al momento de la cirugía fue 8,78 años. La técnica de osteotomía más utilizada fue la de cierre lateral. 35.4% se fijaron con placas, 24.8% con fijadores externos y 33.3% fijación con kw/pins. Conclusión: las técnicas de osteotomías utilizadas actualmente logran corrección angular. No se encontraron diferencias significativas entre los resultados de las técnicas analizadas. No existe un implante que sea superior a otro a la hora de realizar la fijación de las osteotomías de humero distal. Cada implante tiene ventajas y desventajas.

Cubitus varus is the most frequent sequelae in supracondylar humeral fractures in the pediatric population, the objective is to analyze the different types of osteotomies and fixation methods for the treatment of these injuries. Materials and methods: a bibliographic search was carried out using the Pubmed and OVID platform as a search engine, the keywords were Cubitus AND varus AND osteotomy. Results: 13 articles were selected, 237 patients, follow-up of 30 months, age at the time of surgery was 8.78 years. The most used osteotomy technique was lateral closure. 35.4% were fixed with plates, 24.8% with external fixators and 33.3% fixation with kw/pins. Conclusion: the osteotomy techniques currently used achieve angular correction. No significant differences were found between the results of the analyzed techniques. There is no implant that is superior to another when fixing distal humerus osteotomies. Each implant has advantages and disadvantages.

A deformidade em varo do cotovelo é uma complicação comum das fraturas supracondilares do úmero na população pediátrica, o objetivo foi analisar os diferentes tipos de osteotomias e métodos de fixação para o tratamento dessas lesões. Materiais e métodos: foi realizada uma pesquisa bibliográfica utilizando as plataformas Pubmed e OVID como mecanismo de busca, as palavras-chave forom Cubitus AND varus AND osteotomy. Resultados: foram selecionados 13 artigos, com N de 237 pacientes, seguimento de 30 meses, idade no momento da cirurgia foi de 8,78 anos. A técnica de osteotomia mais utilizada foi a ressecção de cunha óssea com base laterala. 35,4% foram fixados com placas, 24,8% com fixações externas e 33,3% foram fixados com kw/pins. Conclusão: as técnicas de osteotomia utilizadas atualmente conseguem correção angular. Não forom encontradas diferenças significativas entre os resultados das técnicas analisadas. Não existe implante superior a outro na fixação de osteotomias distais do úmero. Cada implante tem vantagens e desvantagens.

Computer aided multiplanar osteotomy using patient specific instrumentation to treat cubitus varus in children.

Cubitus varus deformity is a common complication of supracondylar fractures in children. Anatomic correction is the key to obtaining good functional results and avoiding later symptomatic degradation. Different techniques have been described, mainly lateral closing wedge osteotomy. A medial opening wedge osteotomy seems more intuitive, allowing an anatomic reduction, but it is technically challenging. Two-plane radiographs are too simplistic to appreciate the 3D deformity. With medical imaging and image processing advances, three-dimensional (3D) virtual models of a patient's anatomy can be generated. Rapid 3D printing has allowed virtual simulations of surgical corrections to be transferred to real-world applications in the operating room, allowing more precise and accurate surgery with better 3D corrections. 3D computer modeling with the development of customized drilling and cutting guides allows complex medial opening wedge osteotomy for correction of cubitus varus deformity in immature children with best-fit plate synthesis. LEVEL OF EVIDENCE: IV.

A Pediatric Case of Cubitus Varus Deformity due to Olecranon Fracture.

We encountered a pediatric case of cubitus varus deformity with a sheared olecranon fracture in an 8-year-old boy who underwent corrective osteotomy without relevant medical history. The patient fell, resulting in a sheared olecranon fracture. He underwent a closed reduction and casting. As the displacement slightly increased within a week, we followed him without secondary reduction to expect remodeling. No remodeling occurred; corrective osteotomy was performed one-year post-injury for a marked cubitus varus deformity. At 2.5 years after corrective osteotomy, little difference existed in the carrying angle (CA) and varus angulation (VA) of the proximal ulna than that of the contralateral side, without pain or limited range of motion. The acceptable displacement range for pediatric forearm fractures is <1 cm shortening and 15° angular deformation in patients under 10 years old, and 10° angular deformation in older children. Here, the deformity of the ulna in the coronal plane did not remodel. Proximal forearm deformity can be accurately evaluated in flexion contracture elbows by measuring VA. Ulnar osteotomies are commonly performed on Monteggia fractures to reduce the radial head, and the osteotomy site is at the center of the deformity of the diaphysis. Corrective osteotomy for cubitus varus deformity after supracondylar humerus fracture improves function and cosmetic appearance, with good clinical results. In addition, it could prevent cubitus varus deformity from causing posterolateral rotatory instability. The coronal-plane deformity of the proximal ulnar was not expected to remodel. We recommended early accurate reduction and consideration of additional internal fixation for preventing re-displacement. Corrective osteotomy for cubitus varus deformity of the proximal ulna was an effective treatment.

[Computer-simulated osteotomy based on health-side combined with guide plate technique in treatment of cubitus varus deformity in adolescents].

Objective: To explore the feasibility and early effectiveness of computer-simulated osteotomy based on the health-side combined with guide plate technique in the treatment of cubitus varus deformity in adolescents. Methods: The clinical data of 23 patients with cubitus varus deformity who met the selection criteria between June 2019 and February 2023 were retrospectively analyzed. There were 17 males and 6 females, ranging in age from 4 to 16 years with an average of 8.5 years. The time from injury to operation was 1-4 years. The angle of distal humerus rotation was defined by humeral head posterior inclination angle using low radiation dose CT to scan the patient's upper extremity data at one time, and the preoperative rotation of the distal humerus on the affected side was (33.82±4.39)°. The CT plain scan data were imported into 9yuan3D digital orthopaedic system (V3.34 software) to reconstruct three-dimensional images of both upper extremities. The simulated operation was performed with the healthy upper extremity as the reference, the best osteotomy scheme was planned, overlapped and compared, and the osteotomy guide plate was prepared. The patients were followed up regularly after operation, and the formation of callus in the osteotomy area was observed by X-ray examination. Before and after operation, the carrying angle of both upper extremities (the angle of cubitus valgus was positive, and the angle of cubitus varus was negative) and anteversion angle were measured on X-ray and CT images. At the same time, the flexion and extension range of motion of elbow joint and the external rotation range of motion of upper extremity were measured, and Mayo score was used to evaluate the function of elbow joint. Results: The operation time ranged from 34 to 46 minutes, with an average of 39 minutes. All patients were followed up 5-26 months, with a mean of 14.9 months. All the incisions healed by first intention after the operation; 2 patients had nail path irritation symptoms after Kirschner wire fixation, which improved after dressing change; no complication such as breakage and loosening of internal fixators occurred after regular X-ray review. Continuous callus formed at the osteotomy end at 4 weeks after operation, and the osteotomy end healed at 8-12 weeks after operation. At last follow-up, the carrying angle, anteversion angle, external rotation range of motion, and extension and flexion range of motion of the elbow joint of the affected side significantly improved when compared with preoperative ones ( P<0.05). Except for the extension range of motion of the healthy elbow joint ( P<0.05), there was no significant difference in other indicators between the two sides ( P>0.05). At last follow-up, the Mayo elbow score was 85-100, with an average of 99.3; 22 cases were excellent, 1 case was good, and the excellent and good rate was 100%. Conclusion: Computer-simulated osteotomy based on health-side combined with guide plate technique for treating cubitus varus deformity in adolescents can achieve precise osteotomy, which has the advantages of short operation time and easy operation, and the short-term effectiveness is satisfactory.

Distal humeral corrective osteotomy for treatment of supracondylar fracture malunions in children.

Purpose: This study aimed to determine the functional and radiographic outcomes following corrective distal humeral osteotomies for the treatment of supracondylar fracture malunions in children. We hypothesized that such secondary reconstructive procedures could restore a reasonable and near-normal amount of functionality in a large patient cohort at a tertiary referral center. Methods: We retrospectively reviewed the clinical and radiological records of 38 children who underwent corrective osteotomy for posttraumatic supracondylar humeral malunion using K-wire fixation. All clinical data were extracted after chart review, including age, sex, dominant side whenever available, follow-up duration, and elbow range of motion preoperatively and at the final visit. Radiographic parameters, including Baumann's angle, humeroulnar angle, humerocondylar angle, and elbow range of motion were evaluated preoperatively, postoperatively, and at the final visit to identify the surgical correction outcomes. Results: The mean age of the patients at fracture was 5.6 (±2.7) years, and the mean age at surgical intervention was 8.6 (±2.6) years. The mean follow-up period of the current series was 28.2 (±31.1) months. Baumann's angle, humeroulnar angle, and humerocondylar angle were successfully restored to physiological ranges (72.6°, 5.4°, and 36.1°, respectively). Postoperatively, elbow extension improved from -22° (±5.7) to -2.7° (±7.2) versus flexion from 115° (±13.2) to 128.2° (±11.1). Three revision surgeries (8%) were encountered. Conclusions: Corrective osteotomy of the distal humerus with K-wire fixation is a reliable method to efficiently correct malunion of the distal humerus in different planes, thereby improving elbow range of motion and appearance. Level of evidence: level IV: Retrospective therapeutic study.

Cubitus varus after pediatric lateral condylar fracture: true or pseudo?

PURPOSE: Common complications of lateral condylar fractures are lateral condylar overgrowth, lateral bony spur and cubitus varus. Lateral condylar overgrowth or lateral bony spur may appear as cubitus varus on gross examination. Such gross cubitus varus without actual angulation is pseudo-cubitus varus, while a difference of more than 5° in varus angulation on X-ray is true cubitus varus. This study aimed to compare true and pseudo-cubitus varus. METHODS: One hundred ninety-two children treated for unilateral lateral condylar fracture with a follow-up period of over six months were included. The Baumann angle, humerus-elbow-wrist angle and interepicondylar width of both side were compared. More than 5° in varus angulation on X-ray was considered cubitus varus. Increase in interepicondylar width was considered lateral condylar overgrowth or a lateral bony spur. The risk factors that could predict the development of a true cubitus varus were analyzed. RESULTS: True cubitus varus was 32.8%, measured by Baumann angle and 29.2%, measured by humerus-elbow-wrist angle. A total of 94.8% of patients showed an increased interepicondylar width. The predicted cut-off value for 5° varus angulation on the Baumann angle was a 3.675 mm increase in interepicondylar width by ROC curve analysis. The risk of cubitus varus in stage 3, 4, and 5 fractures according to Song's classification was 2.88 times higher than that in stage 1 and 2 fractures on multivariable logistic regression analysis. CONCLUSION: Pseudo-cubitus varus is more prevalent than true cubitus varus. A 3.7 mm increase in interepicondylar width could simply predict true cubitus varus. The risk of cubitus varus increased in Song's classification stages 3, 4, and 5.

Guided Growth for the Treatment of Cubitus Varus in Children: Medium- to Long-Term Results.

Correction of cubitus varus is commonly attempted through supracondylar humeral osteotomy. We hypothesized that lateral distal humeral hemiepiphysiodesis (LDHH) could be used to gradually correct this deformity in children. We conducted a retrospective study including all patients who underwent LDHH with the eight-Plate system between 2008 and 2018, with a minimum 4-year follow-up. We collected demographic, fracture-related, pre- and postoperative clinical (carrying angle (CA), ROM), and radiological data (humeral-ulnar angle (HUA), Baumann angle (BA), shaft-condylar angle (SCA), lateral capitellohumeral angle (LCHA)), as well as data on complications and satisfaction at last follow-up. Fifteen patients were included, with a median follow-up of 81 (64-103) months. All the variables had improved significantly as follows: CA -16 (-18 to -9)°, HUA -16 (-19 to -12)°, BA -11 (-17 to -7)°, SCA 7.5 (3.3 to 13.8)°, LCHA -4.8 (-6.8 to 0.6), flexion 10 (0 to 24)°, and extension 10 (0 to 10)°. The annual correction rate in terms of HUA was 2.41° (1.9 to 3.2). There were 5 cases of aseptic screw loosening, 4 of them requiring replacement, without relation to age at surgery (p = 0.324). Most patients (86.67%) were satisfied, and a relationship was found with younger age at surgery (p = 0.037). In conclusion, preliminary results show that LDHH with the eight-Plate system is an effective technique for mild to moderate cubitus varus deformity correction in children. Patients should be advised of the relatively long duration of implant retention and the possibility of reoperation for screw replacement or implant removal.

[PACS and Photoshop assisted isosceles triangle osteotomy and Kirschner wire tension buckle fixation in the treatment of cubitus varus in children].

OBJECTIVE: To investigate the clinical efficacy of picture archiving and communication system (PACS) and Photoshop assisted isosceles triangle osteotomy and Kirschner wire fixation with tension band in the treatment of cubitus varus in children. METHODS: The clinic data of 20 children with cubitus varus treated with isosceles triangle osteotomy of distal humerus and Kirschner wire fixation with tension band from October 2014 to October 2019, were retrospectively analyzed. There were 13 males and 7 females, aged from 3.2 to 13.5 years old, the median age was 6.65 years old. PACS system was applied for the osteotomy design preoperatively, simulating and measuring the side length of isosceles triangle osteotomy. Then, Photoshop system was used to simulate the preoperative and postoperative osteotomy graphics, which could guide precise osteotomy during operation. RESULTS: All the 20 patients were followed up for 20 to 24 months, with a median of 22.5 months. At the last follow-up, the carrying angle of the affected limb was 5 ° to 13 °, with a median of 8.3 °. The clinical efficacy was evaluated according to the Flynn elbow function score:excellent in 16 cases, good in 2 cases, and fair in 2 cases. CONCLUSION: The treatment of cubitus varus in children by isosceles triangle osteotomy and Kirschner wire fixation with tension band assisted by PACS and Photoshop system has shown good clinical outcome.

Shortening dome osteotomy for correction of severe cubitus varus secondary to malunited supracondylar fractures in children.

The results of conventional corrective procedures remain suboptimal for severe cubitus varus deformities (> 30°) in children. We present the results of shortening dome osteotomy for the correction of such deformities. PATIENTS AND METHODS: We present retrospective review of prospectively collected data of 18 patients (11 boys and 7 girls) who underwent shortening dome osteotomy between January 2011 and December 2019 for severe cubitus varus deformities (> 30°) secondary to malunited supracondylar fracture. The procedure involved the removal of convexo-concave bone (5-8 mm wide) between the two domes. Humero-ulnar angles, lateral condylar prominence index (LCPI), and elbow range of movements were recorded preoperatively and postoperatively. RESULTS: Mean age was 7.5 years (range 5 years-11 years). Indication for surgery was poor cosmesis in all the patients and tardy ulnar nerve symptoms in three patients. Mean preoperative humero-ulnar angle was 26.1° varus (range 22°-34°), while it was 7.1° valgus (range 0°-12°) for contralateral normal elbow. They were followed for a mean duration of 2.2 years (range 12 months-5.8 years). The mean postoperative valgus angle achieved was 7.3° (range 2°-12°) as total angular correction achieved was 34.4° (range 30°-44°) (p < 0.001). Radiological healing was observed in all the patients at mean duration of 7.1 weeks (range 5 weeks-9 weeks). Mean preoperative and postoperative LCPI were - 2.4 (range +4.7 to - 10.5) and - 1.7 (range +4.5 to - 5.1), respectively (p = 0.595). Three patients had pin tract infections and two of them responded to aseptic dressings and oral antibiotics, while another required early pin removal and additional protection in splint. All patients regained preoperative arc of motion within 6 months after the procedure. CONCLUSION: Shortening dome osteotomy is a safe and effective method for correcting severe cubitus varus deformities (> 30°) secondary to malunited supracondylar fracture in children.

PACS and Photoshop assisted isosceles triangle osteotomy and Kirschner wire tension buckle fixation in the treatment of cubitus varus in children / 中国骨伤

OBJECTIVE@#To investigate the clinical efficacy of picture archiving and communication system (PACS) and Photoshop assisted isosceles triangle osteotomy and Kirschner wire fixation with tension band in the treatment of cubitus varus in children.@*METHODS@#The clinic data of 20 children with cubitus varus treated with isosceles triangle osteotomy of distal humerus and Kirschner wire fixation with tension band from October 2014 to October 2019, were retrospectively analyzed. There were 13 males and 7 females, aged from 3.2 to 13.5 years old, the median age was 6.65 years old. PACS system was applied for the osteotomy design preoperatively, simulating and measuring the side length of isosceles triangle osteotomy. Then, Photoshop system was used to simulate the preoperative and postoperative osteotomy graphics, which could guide precise osteotomy during operation.@*RESULTS@#All the 20 patients were followed up for 20 to 24 months, with a median of 22.5 months. At the last follow-up, the carrying angle of the affected limb was 5 ° to 13 °, with a median of 8.3 °. The clinical efficacy was evaluated according to the Flynn elbow function score:excellent in 16 cases, good in 2 cases, and fair in 2 cases.@*CONCLUSION@#The treatment of cubitus varus in children by isosceles triangle osteotomy and Kirschner wire fixation with tension band assisted by PACS and Photoshop system has shown good clinical outcome.

Computer-simulated osteotomy based on health-side combined with guide plate technique in treatment of cubitus varus deformity in adolescents / 中国修复重建外科杂志

OBJECTIVE@#To explore the feasibility and early effectiveness of computer-simulated osteotomy based on the health-side combined with guide plate technique in the treatment of cubitus varus deformity in adolescents.@*METHODS@#The clinical data of 23 patients with cubitus varus deformity who met the selection criteria between June 2019 and February 2023 were retrospectively analyzed. There were 17 males and 6 females, ranging in age from 4 to 16 years with an average of 8.5 years. The time from injury to operation was 1-4 years. The angle of distal humerus rotation was defined by humeral head posterior inclination angle using low radiation dose CT to scan the patient's upper extremity data at one time, and the preoperative rotation of the distal humerus on the affected side was (33.82±4.39)°. The CT plain scan data were imported into 9yuan3D digital orthopaedic system (V3.34 software) to reconstruct three-dimensional images of both upper extremities. The simulated operation was performed with the healthy upper extremity as the reference, the best osteotomy scheme was planned, overlapped and compared, and the osteotomy guide plate was prepared. The patients were followed up regularly after operation, and the formation of callus in the osteotomy area was observed by X-ray examination. Before and after operation, the carrying angle of both upper extremities (the angle of cubitus valgus was positive, and the angle of cubitus varus was negative) and anteversion angle were measured on X-ray and CT images. At the same time, the flexion and extension range of motion of elbow joint and the external rotation range of motion of upper extremity were measured, and Mayo score was used to evaluate the function of elbow joint.@*RESULTS@#The operation time ranged from 34 to 46 minutes, with an average of 39 minutes. All patients were followed up 5-26 months, with a mean of 14.9 months. All the incisions healed by first intention after the operation; 2 patients had nail path irritation symptoms after Kirschner wire fixation, which improved after dressing change; no complication such as breakage and loosening of internal fixators occurred after regular X-ray review. Continuous callus formed at the osteotomy end at 4 weeks after operation, and the osteotomy end healed at 8-12 weeks after operation. At last follow-up, the carrying angle, anteversion angle, external rotation range of motion, and extension and flexion range of motion of the elbow joint of the affected side significantly improved when compared with preoperative ones ( P<0.05). Except for the extension range of motion of the healthy elbow joint ( P<0.05), there was no significant difference in other indicators between the two sides ( P>0.05). At last follow-up, the Mayo elbow score was 85-100, with an average of 99.3; 22 cases were excellent, 1 case was good, and the excellent and good rate was 100%.@*CONCLUSION@#Computer-simulated osteotomy based on health-side combined with guide plate technique for treating cubitus varus deformity in adolescents can achieve precise osteotomy, which has the advantages of short operation time and easy operation, and the short-term effectiveness is satisfactory.