Development of stopped-flow hyper-CEST NMR method on recirculating hyperpolarization system as applied to void space analysis in polymers.

129Xe NMR spectroscopy of polymers can provide important information on void spaces, sometimes called free volume, in polymers. Unfortunately, the spectroscopy's low sensitivity has limited its widespread use in both academic and industrial research. In order to overcome such a difficult situation, hyper-CEST method which employs hyperpolarization and CEST techniques, is examined after the introduction of recirculation and subtraction modes. Alongside the incorporated stopped-flow technique, these modes were very efficient in detecting very weak hidden signals from cellulose nanofiber (CNF) and silk fibroin (SF) films and in discussing the void space in these polymers. From the analysis of detailed saturation frequency dependence in the increment of 100 Hz, the chemical shifts of hidden peaks were successfully determined to give reasonable values for the size of void space in CNF and SF. Application on thermoplastic polyurethane film also supported our method of analysis. The subtraction mode was very efficient in judging the presence or absence of any peak at a fixed saturation frequency. These facts support that the mode will surely be useful in the future exploratory study of very weak hidden signals.

Physico-chemical characterisation of whole meal flours from three wild chickpea varieties and their technological performance in Gluten Free Bread.

The present study investigated the physico-chemical characteristics of whole-meal flours from three wild chickpea varieties (white chickpea - WC, red rough chickpea - RRC, red smooth chickpea - RSC) compared to a modern chickpea variety (MC) and their bread-making performances in 30% (w/w flour) substituted GF breads. Wild chickpea flours showed the highest ash, total dietary fiber (TDF), and total antioxidant capacity (6.3%, 13.4%, and 9.5% increase for WC, RRC, and RSC flour compared to MC flour) values compared to MC sample, and red varieties (RRC- and RSC-samples) showed the highest total phenolic content (15.5% and 17.0% increase compared to MC flour). Significant differences were also found in protein content and techno-functional properties. Bread specific volume and crumb hardness were significantly affected by chickpea variety, with red varieties (RRC- and RSC-samples) revealing the lowest impact. 1H NMR proton molecular mobility significantly changed as a function of chickpea variety, and these differences might be associated to the different macroscopic bread quality. Overall, the tested wild chickpea flours revealed valuable chemical composition, and differed in the techno-functional and bread-making performances, with red varieties showing the most promising results to improve GF breads.

13C-labelled Glucose Reveals Shifts In Fermentation Pathway During Cathodic Electro-Fermentation With Mixed Microbial Culture.

Cathodic Electro Fermentation (CEF) is an innovative approach to manage the spectrum of products deriving from anaerobic fermentation. Herein, mixed microbial culture fermentation using a ternary mixture containing labelled 13C glucose and non-labelled acetate and ethanol was studied to identify the role of polarization on the metabolic pathways of glucose fermentation. CEF at an applied potential of -700 mV (vs. SHE, Standard Hydrogen Electrode) enhanced the production yield of acetate, propionate, and butyrate (0.90 ± 0.10, 0.22 ± 0.03, and 0.34 ± 0.05 mol/mol; respectively) compared to control tests performed at open circuit potential (OCP) (0.54 ± 0.09, 0.15 ± 0.04 and, 0.21 ± 0.001 mol/mol, respectively). Results indicate that CEF affected the 13C labelled fermented product levels and their fractional 13C enrichments, allowing to establish metabolic pathway models. This work demonstrates that, under cathodic polarization, the abundance of both fully 13C labelled propionate and butyrate isotopomers increased compared to control tests. The effect of CEF is mainly due to intermediates initially produced from the glucose metabolic transformation in the presence of non-labelled acetate and ethanol as external substrates. These findings represent a significant advancement in current knowledge of CEF, which offers a promising tool to control mixed cultures bioprocesses.

Functional characterization and biotechnological applications of exopolysaccharides produced by newly isolated Enterococcus hirae MLG3-25-1.

This study investigated the potential applications of Enterococcus hirae MLG3-25-1 exopolysaccharides (EPS), with a focus on their isolation, identification, production, and functional characteristics. After the bacterial strain was cultured in De Man-Rogosa-Sharpe (MRS) medium containing 1% glucose at 37 °C, the EPS was refined, and the highest yield of 0.85 mg/mL was achieved at the 24-h incubation period. Enterococcus hirae MLG3-25-1 was found to be able to produce EPS. The study explored the microstructure of the EPS, which resembles polysaccharide sheets with smooth surfaces, through scanning electron microscope (SEM) analysis. Through Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) analysis, the chemical composition, aligning with glycosidic bond characteristics, has been deciphered. Furthermore, the antimicrobial and antibiofilm activities against pathogenic bacteria, particularly Bacillus sp., demonstrated potential applications in combating antibiotic resistance. The EPS exhibited notable antioxidant activity (89.36% DPPH scavenging), along with high water-holding capacity (575%), emulsifying activity, and flocculation activity, suggesting its potential as a stabilizing agent in the food industry. Overall, this study provides a comprehensive characterization of Enterococcus hirae MLG3-25-1 EPS, emphasizing its diverse applications in antimicrobial, antioxidant, and food-related industries. These findings lay the groundwork for further exploration and utilization of this EPS in various sectors.

Structure of the O-specific polysaccharide of Asaia bogorensis ATCC BAA-21 lipopolysaccharide.

Asaia bogorensis is a Gram-negative bacterium isolated from flowers and fruits growing in tropical climate, reproductive system of mosquitoes, and rarely from immunocompromised patients. In Europe, A. bogorensis is responsible for the contamination of flavoured mineral waters. One of the important surface antigen and an element of the bacterial biofilm is lipopolysaccharide (LPS, endotoxin). To date, no data on A. bogorensis LPS structure has been reported. Chemical analysis and 1H,13C nuclear magnetic resonance spectroscopy revealed the novel structure of the O-specific polysaccharide of A. bogorensis ATCC BAA-21 LPS. It was concluded that the repeating unit of the O-antigen is a branched trisaccharide with the following structure: →6)-α-d-Glcp-(1→2)-[ß-d-Glcp-(1→3)]-α-l-Rhap-(1→ .

LAMAIS: A library-aided approach for efficient 1D 1H NMR qualitative analysis in plant metabolomics.

BACKGROUND: One-dimensional proton nuclear magnetic resonance (1D 1H NMR) spectroscopy is a non-destructive, non-targeted analytical technique providing both qualitative and quantitative insights, particularly beneficial for mixture analysis. However, the qualitative analysis of 1D 1H NMR spectra for mixture samples is laborious and time-consuming, involving extensive database searches and verification experiments like spiking. This process heavily relies on the analyst's expertise, leading to efficiency discrepancies. There is a pressing need for a reliable method to streamline operations and enhance the efficiency of qualitative analysis in complex mixtures. RESULTS: We introduce a library-aided method for spectral profiling, named LAMAIS. This method achieves compound identification through similarity assessment between samples and template data, allowing rapid, automatic compound identification and full-spectrum peak assignment without the need for fitting. LAMAIS correctly identifies over 90 % of components in synthetic mixtures and more than 75 % in experimental mixtures, surpassing other representative methods with a higher F2 score. Our reference library, which currently includes 71 compounds, is tailored to capture the commonality of primary metabolites across diverse plant species. The analysis of real-world samples yielded encouraging results, underscoring LAMAIS's versatility as an auxiliary tool suitable for a variety of botanical sources. For analyst convenience, interactive graphics are utilized as the output format. SIGNIFICANCE: LAMAIS excels, demonstrating competitiveness and reliability. The approach minimizes repetitive tasks and sample wastage, improving the efficiency of 1D 1H NMR qualitative analysis. Constructing a reference library effectively preserves knowledge, mitigates reliance on human experience, and addresses gaps in the analysis of plant source samples.

The role of NMR spectroscopy in lignocellulosic biomass characterisation: A mini review.

Lignocellulosic biomass (LB) is promising feedstock for the production of various bio-based products. However, due to its heterogenous character, complex chemical structure and recalcitrance, it is necessary to know its structural composition in order to optimize pretreatment process and further (bio)conversion into bio-based products. Nuclear Magnetic Resonance (NMR) spectroscopy is a fast and reliable method that can provide advanced data on the molecular architecture and composition of lignocellulosic biomass. In this brief overview, characteristic examples of the use of high-resolution NMR spectroscopy for the investigation of various types of LB and their structural units are given and the main drawbacks and future perspectives are outlined.

Unveiling the Structural Characteristics of Lignin and Lignin-Carbohydrate Complexes in Fibers and Parenchyma Cells of Moso Bamboo during Different Growing Years.

Understanding and recognizing the structural characteristics of lignin-carbohydrate complexes (LCCs) and lignin in different growth stages and tissue types of bamboo will facilitate industrial processes and practical applications of bamboo biomass. Herein, the LCC and lignin samples were sequentially isolated from fibers and parenchyma cells of bamboo with different growth ages. The diverse yields of sequential fractions not only reflect the different biomass recalcitrance between bamboo fibers and parenchyma cells but also uncover the structural heterogeneity of these tissues at different growth stages. The molecular structures and structural inhomogeneities of the isolated lignin and LCC samples were comprehensively investigated. The results showed that the structural features of lignin and LCC linkages in parenchyma cells were abundant in ß-O-4 linkages but less with carbon-carbon linkages, suggesting that lignin and cross-linked LCC in parenchyma cells are simple in nature and easily to be tamed and tractable in the current biorefinery. Parallelly, the different ball-milled samples were directly characterized by high-resolution (800 M) solution-state 2D-HSQC NMR to analyze the whole lignocellulosic material. Overall, the scheme presented in this study will provide a comprehensive understanding of lignin and LCC linkages in fibers and parenchyma cells of bamboo and enable the utilization of bamboo biomass.

HPTLC-guided flash chromatographic isolation and spectroscopic identification of bioactive compounds from olive flowers.

The goal of preparative chromatography is to isolate suitable amounts of compound(s) at the required purity in the most cost-effective way. This study analyses the power of High-performance thin-layer chromatography (HPTLC) guided preparative flash chromatography to separate and isolate bioactive compounds from an olive flower extract for their further characterisation via spectroscopy. The structure and purity of isolated bioactive compounds were assessed using Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. Flash chromatography of the olive flower extract successfully isolated pure oleanolic and maslinic acids. Moreover, the flash chromatography of the extract allowed isolation and phytochemical analysis of the most lipophilic fraction of the extract, which was found to contain n-eicosane and n-(Z)-eicos-5-ene, that has not been isolated previously with preparative TLC.

Intra- and extracellular real-time analysis of perfused fibroblasts using an NMR bioreactor: A pilot study.

INTRODUCTION: Metabolomic discrimination of different mitochondrial defects is challenging. We describe an NMR-based bioreactor allowing real-time intra- and extracellular metabolic investigation of perfused fibroblasts. OBJECTIVES: The objective of this study is (I) determining whether metabolic investigations of perfused fibroblasts overall and separated for intra- and extracellular contributions by real-time NMR allows for discrimination of different representative mitochondrial defects in a feasibility study and (II) gaining insight into physiological consequences of mitochondrial dysfunction in basal condition and during glycolysis inhibition. METHODS: Overall, intra- and extracellular metabolomes of malate dehydrogenase 2 (MDH2), pyruvate dehydrogenase (PDH), complex I (CI) deficient fibroblasts, and control fibroblasts were investigated under standard culture conditions and under glycolysis inhibition. In addition to "overall" metabolite quantification, intra- and extracellular metabolic contributions were separated based on diffusion rate differences. RESULTS AND DISCUSSION: Overall metabolites: Chemometric analysis of the entire metabolome revealed good separation between control, PDH and MDH2, while CI was less well separated. However, mixed intra- and extracellular changes complicated interpretation of the cellular metabolism. Intra- and extracellular metabolites: Compartment specific chemometrics revealed possibly augmenting metabolomic separation between control and deficient cell lines under basal and inhibition condition. All mitochondrial defects exhibited upregulation of glycolytic metabolism compared to controls. Inhibition of glycolysis resulted in perturbations of other metabolic pathways such as glutaminolysis, alanine, arginine, glutamate, and proline metabolism. MDH2 showed upregulation of alanine and glutamate metabolism, while the CI defect revealed lower intracellular arginine and downregulation of glutamate and arginine-dependent proline synthesis. CONCLUSION: Discrimination of intra- and extracellular metabolic contributions helps understanding the underlying mechanisms of mitochondrial disorders, uncovers potential metabolic biomarkers, and unravels metabolic pathway-specific adaptations in response to metabolic perturbations.

Nano-cubosomes of the phyto-active principle in Withania somnifera: LC-MS-NMR, anti-microbial, and insights of the anti-neuropathic and anti-inflammatory mechanism.

Withania somnifera (W. somnifera) has a long history of safety in the amelioration of neuro-active ailments. The current study aims to explore Withania somnifera phyto-active principle anti-microbial, ant-neuropathic, and anti-inflammatory activities, and to modify these activities utilizing nano-cubosomes exploiting their mechanisms of action. Bio-guided fractionation technique was utilized, to identify the most phyto-active compound, using LC-MS-NMR online technique and biological models of diabetes, neuropathy, and inflammation. In-vitro antibacterial activity was also monitored. The HbA1c, in-vivo antioxidant (serum-catalase, TBARS, and GSH), serum insulin, and pro-inflammatory serum cytokines (TNF alpha, IL-six, and IL-ten) levels have been assessed to establish the anti-neuropathic and anti-inflammatory mechanisms. The nano-cubosomal formulations (CUB 1-3) were utilized to improve the W. somnifera most active compound efficacy. W. somnifera has shown ten major peaks; coagulin Q (10.2 %), dihydrowithanolide A (2.4 %), dihydrowithaferin D (1.8 %), physagulin D (7.6 %), withanoside V (2.3 %), withanolide A (WDA, 10.3 %), withafrin A (4.9 %), withaferin D (7.7 %), withanone 9 (9.9 %), withanolide D (4.8 %). The bio-guided fractionation technique utilizing LC-MS-NMR technique has proved that withanolide A (WDA) is the most phyto-active compound in W. somnifera. The latter has shown better results than WDA, which might be due to other effective compounds in Ws. However, CUB 3 (WDA nano-cubosomes dispersion) has shown more prominent anti-diabetic, anti-neuropathic, anti-inflammatory, and anti-bacterial potentials than Ws and WDA. Thus, CUB 3 modified WDA activity, and improved its efficacy. The normalization of HbA1c levels, increased insulin secretagogue potential, and the amelioration of the oxidative-stress may be the underlying Ws, WDA, and CUB 3 antidiabetic neuropathy mechanism. Moreover, the Ws, WDA, and CUB 1-3 anti-inflammatory mechanism might be due to the amelioration of the pro-inflammatory serum cytokines (decreasing TNF alpha and IL-six levels and increasing IL-ten). Thus, CUB 3 might be a powerful tool in augmenting Withania somnifera activity as an oral drug-delivery system and improving its efficacy against neuropathy and inflammation.

TLC-bioautography-guided identification and assessment of the antibacterial compounds from Feijoa sellowiana.

INTRODUCTION: A rapid procedure was developed for the targeted isolation and assessment of antibacterial compounds from plant-based materials. The effectiveness of this method was demonstrated using Feijoa sellowiana fruit peels. OBJECTIVE: The objectives of this study are as follows: develop an efficient procedure utilizing direct thin-layer chromatography (TLC)-bioautography to facilitate the targeting, identification, and purification of antibacterial compounds from plant extracts and delineate a method based on TLC-bioautography to determine the minimum effective dose (MED), alongside a colorimetric broth microdilution aided by high-performance liquid chromatography (HPLC) for evaluating the isolated active compounds. METHODOLOGY: Active compounds were targeted using TLC-bioautography against Staphylococcus aureus, and the identification was achieved through liquid chromatography-mass spectrometry (LC-MS) combined with Compound Discoverer. Purification was carried out using a customized separation method. The structure was confirmed using nuclear magnetic resonance (NMR) spectroscopy. The MED, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) were determined by two enhanced antibacterial assays. RESULTS: The main antibacterial compound identified was flavone. A TLC-bioautography-based antibacterial assay and a colorimetric broth microdilution assisted by HPLC were described as the enhanced antibacterial assay protocols. The MED, MIC, and MBC of flavone against S. aureus were found to be 4.2-5.2 µg/cm2, 225-275 µg/mL, and 550-650 µg/mL, respectively. Similarly, the MED, MIC, and MBC against Escherichia coli were determined to be 5.2-6.1 µg/cm2, 325-375 µg/mL, and 375-425 µg/mL, respectively. CONCLUSION: This study proposed an enhanced bioassay-guided separation technique for the isolation of antibacterial compounds from plants, along with two improved methods for assessing the antibacterial efficacy of insoluble or colored compounds.

NMR-based metabolomics analysis reveals the effect of environmental contamination exposure on fishermen living around the Mundaú Lagoon in Maceió (Alagoas, Brazil).

The Mundaú lagoon in Maceió (Alagoas, Brazil) is a crucial resource for the local population, particularly fishing communities. Recent studies have revealed potential toxic metal contamination in the lagoon, particularly with mercury (Hg) levels exceeding the maximum regulated values. This inorganic contaminant may be impacting the health of fishermen and the local population. In this context, metabolomics, a study of small-molecule metabolites, can offer insights into the physiological impact of environmental contamination on humans. Thus, volunteers from the control and exposed groups were selected, considering the main exposure criteria primarily defined by their proximity and interaction with the lagoon. Blood and urine samples were collected from the volunteers and subjected to analysis using NMR spectroscopy. The data underwent Principal Component Analysis (PCA) and Orthogonal Partial Least-Squares Discriminant Analysis (OPLS-DA) based on metabolic patterns to establish group discrimination or identification. Metabolic pathways were assessed through enrichment analysis. The study revealed several metabolic disturbances in the exposed group's urine and plasma samples compared to control group. Noteworthy findings included arginine and proline metabolism disruptions, indicative of ammonia recycling and urea cycle impairment. These changes suggest compromised ammonia detoxification in the exposed group. Disturbances in the tricarboxylic acid (TCA) cycle and the transfer of acetyl groups into mitochondria suggested systemic metabolic stress in energy metabolism. Furthermore, elevated carnitine and ketone levels may indicate compensatory responses to low TCA cycle activity. Alterations in glutamate and glutathione metabolism and imbalances in glutathione levels indicate oxidative stress and impaired detoxification. This study highlights significant metabolic changes in fishermen exposed to contaminated environments, which can affect various metabolic pathways, including energy metabolism and antioxidant processes, potentially making individuals more vulnerable to the adverse effects of environmental contaminants. Finally, this work highlights insights into the relationship between environmental contamination and metabolic pathways, particularly in regions with limited studies.

Circulating factors, in both donor and ex-vivo heart perfusion, correlate with heart recovery in a pig model of DCD.

BACKGROUND: Heart transplantation with donation after circulatory death and ex-situ heart perfusion offers excellent outcomes and increased transplantation rates. However, improved graft evaluation techniques are required to ensure effective utilization of grafts. Therefore, we investigated circulating factors, both in-situ and ex-situ, as potential biomarkers for cardiac graft quality. METHODS: Circulatory death was simulated in anesthetized male pigs with warm ischemic durations of 0, 10, 20, or 30 min. Hearts were explanted and underwent ex-situ perfusion for 3h in an unloaded mode, followed by left ventricular loading for 1h, to evaluate cardiac recovery (outcomes). Multiple donor blood and ex-situ perfusate samples were used for biomarker evaluation with either standard biochemical techniques or nuclear magnetic resonance spectroscopy. RESULTS: Circulating adrenaline, both in the donor and at 10 min ex-situ heart perfusion, negatively correlated with cardiac recovery (p <0.05 for all). We identified several new potential biomarkers for cardiac graft quality that can be measured rapidly and simultaneously with nuclear magnetic resonance spectroscopy. At multiple timepoints during unloaded ex-situ heart perfusion, perfusate levels of acetone, betaine, creatine, creatinine, fumarate, hypoxanthine, lactate, pyruvate and succinate (p <0.05 for all) significantly correlated with outcomes; the optimal timepoint being 60 min. CONCLUSIONS: In heart donation after circulatory death, circulating adrenaline levels are valuable for cardiac graft evaluation. Nuclear magnetic resonance spectroscopy is of particular interest, as it measures multiple metabolites in a short timeframe. Improved biomarkers may allow more precision and therefore better support clinical decisions about transplantation suitability.

Unmasking Fluorinated Moieties on the Surface of Hydride-Terminated Silicon Nanoparticles.

Despite the widespread use of hydrofluoric acid (HF) in the preparation of silicon surfaces, the true nature of fluorinated surface species remains unclear. Here, we employ an array of characterization techniques led by solid-state nuclear magnetic resonance spectroscopy to uncover the nature of fluorinated moieties on the surface of hydride-terminated silicon nanoparticles (H-SiNPs). A structural model that explains the observed trends in 19F and 29Si magnetic shielding is proposed and further supported by quantum chemical computations. Fluorine is incorporated into local oxidation domains on the surface and clustered at the interface of the oxide and surrounding hydride-terminated surface. Silicon sites capped by a single fluorine are also identified by their distinct 19F and 29Si chemical shifts, providing insight into how fluorine termination influences the electronic structure. The extent of fluorine passivation and the effects of fluorine on the optical properties of SiNPs are also discussed. Finally, challenges associated with Teflon contamination are highlighted that future explorations of nanomaterials may have to contend with.

Enzymatic hydrolysis method for development of low glycemic index rice flour from temperate grown rice (var. Jehlum): Numerical optimization, rheological and spectroscopic characteristics.

This study aimed at optimizing process protocols for development of low glycemic index (GI) rice flour (LGIRF) by employing enzymatic hydrolysis method using central composite rotatable design (CCRD). LGIRF was evaluated for pasting, farinographic, spectroscopic and microbiological attributes. Independent variables for optimization included concentrations of α-amylase (0.02-0.12 %), glucoamylase (0.02-0.24 %), as well as the incubation temperature (55-80°C). Resistant starch (RS), glycemic index (GI) and glycemic load (GL) were investigated as response variables. The optimum conditions for development of LGIRF with better quality were- α-amylase concentration of 0.040 %, glucoamylase concentration of 0.070 % and an incubation temperature of 60 °C. The results of mineral analysis revealed significantly (p < 0.05) lower levels of boron, potassium, zinc, phosphorus, magnesium, and manganese in LGIRF, while iron and copper were significantly higher. The viscosity profile as evident from pasting profile and farinographic characteristics of LGIRF were significantly (p < 0.05) lower than native rice flour. 1H NMR and 13C NMR spectroscopic studies showed an increase in flexible starch segments and a decrease in amorphous portion of starch LGIRF, along with chemical shift alterations in carbons 1 and 4. Free fatty acids and total plate count were significantly (p < 0.05) higher in LGIRF although was within limits.

Perturbations in mitochondrial metabolism associated with defective cardiolipin biosynthesis: An in-organello real-time NMR study.

Mitochondria are central to cellular metabolism; hence, their dysfunction contributes to a wide array of human diseases. Cardiolipin, the signature phospholipid of the mitochondrion, affects proper cristae morphology, bioenergetic functions, and metabolic reactions carried out in mitochondrial membranes. To match tissue-specific metabolic demands, cardiolipin typically undergoes an acyl tail remodeling process with the final step carried out by the phospholipid-lysophospholipid transacylase tafazzin. Mutations in tafazzin are the primary cause of Barth syndrome. Here, we investigated how defects in cardiolipin biosynthesis and remodeling impacts metabolic flux through the TCA cycle and associated yeast pathways. Nuclear magnetic resonance was used to monitor in real-time the metabolic fate of 13C3-pyruvate in isolated mitochondria from three isogenic yeast strains. We compared mitochondria from a wild-type strain to mitochondria from a Δtaz1 strain that lacks tafazzin and contains lower amounts of unremodeled cardiolipin, and mitochondria from a Δcrd1 strain that lacks cardiolipin synthase and cannot synthesize cardiolipin. We found that the 13C-label from the pyruvate substrate was distributed through twelve metabolites. Several of the metabolites were specific to yeast pathways including branched chain amino acids and fusel alcohol synthesis. While most metabolites showed similar kinetics amongst the different strains, mevalonate concentrations were significantly increased in Δtaz1 mitochondria. Additionally, the kinetic profiles of α-ketoglutarate, as well as NAD+ and NADH measured in separate experiments, displayed significantly lower concentrations for Δtaz1 and Δcrd1 mitochondria at most time points. Taken together, the results show how cardiolipin remodeling influences pyruvate metabolism, tricarboxylic acid cycle flux, and the levels of mitochondrial nucleotides.

Measuring Erosion of Biodegradable Polymers in Brimonidine Drug Delivery Implants by Quantitative Proton NMR Spectroscopy (q-HNMR).

Erosion of biodegradable polymeric excipients, such as polylactic acid (PLA) and polylactic-co-glycolic acid (PLGA), is generally characterized by microbalance for the remaining mass of PLA and/or PLGA and Gel Permeation Chromatography (GPC) for molecular weight (MW) decrease. For polymer erosion studies of intravitreal sustained release brimonidine implants, however, both microbalance and GPC present several challenges. Mass loss measurement by microbalance does not have specificity for excipient polymers and drug substances. Accuracy of the remaining mass by weighing could also be low due to sample mass loss through retrieval-drying steps, especially at later drug release (DR) time points. When measuring the decrease of polymer MW by GPC, trace amounts of polymeric degradants (oligomers and/or monomers) trapped inside the implants during DR tests may not be measurable due to sensitivity limitations of the GPC detector and column MW range. Previous efforts to measure remained PLGA weight of dexamethasone micro-implants using qNMR with external calibration have been performed, however, these measurements do not account for chemical structure changes (i.e. LA to GA ratio changes from time zero) of PLGA implants during drug release tests. Here, a qNMR method with an internal standard was developed to monitor the following changes in micro-implants during drug release tests: 1. The remaining overall PLA/PLGA mass. 2. The remaining lactic acid (LA), glycolic acid (GA) unit and PLGA's lauryl ester end group percentages. 3. The trace content of PLA/PLGA oligomers as degradants retained in the implants. Unlike microbalance analysis, qNMR has both specificity for drug substance, excipient polymer, and accuracy due to minimal implant loss during sample preparation. Compared to the overall PLA/PLGA remaining mass generally monitored in erosion studies, the percentage of remaining LA, GA, and the ester end group provide more information about the microstructure change (such as hydrophobicity) of PLA/PLGA. Additionally, the qNMR method can complement GPC methods by measuring the change of remaining PLA and PLGA oligomer concentrations in brimonidine implants, with tenfold less sample and no MW cutoff. The qNMR method can be used as a sensitive tool for both polymer excipient characterization and kinetics studies of brimonidine implant erosion.

Comparison of kink-band structures and specificities of cell wall polysaccharides in modern and ancient flax fibres.

Flax (Linum usitatissimum L.) is a plant of industrial importance, its fibres being presently used for high-value textile applications, composite reinforcements as well as natural actuators. Human interest in this fibre-rich plant dates back several millennia, including to Ancient Egypt where flax was used extensively in various quotidian items. While the recent technical developments of flax fibres continue to diversify through scientific research, the historical use of flax also has rich lessons for today. Through careful examination of ancient Egyptian and modern flax fibres, this study aims to conduct a multi-scale characterization from the yarn to the fibre cell wall scale, linking differences in structure and polysaccharide content to the mechanical performance and durability of flax. Here, a multi-scale biochemical study is enriched by scanning electron microscopy and nanomechanical investigations. A key finding is the similarity of cellulose features, crystallinity index and local mechanical performances between ancient and modern fibres. Biochemically speaking, monosaccharides analysis, deep-UV and NMR investigations demonstrate that ancient fibres exhibit less pectins but a similar hemicellulosic content, especially through uronic acids and galactose, suggesting the sensitivity of these non-crystalline components.

Lysine methylation: A strategy to improve in-cell NMR spectroscopy of proteins.

BACKGROUND: In-cell NMR is a valuable technique for investigating protein structure and function in cellular environments. However, challenges arise due to highly crowded cellular environment, where nonspecific interactions between the target protein and other cellular components can lead to signals broadening or disappearance in NMR spectra. RESULTS: We implemented chemical reduction methylation to selectively modify lysine residues on protein surfaces aiming to weaken charge interactions and recover obscured NMR signals. This method was tested on six proteins varying in molecular size and lysine content. While methylation did not disrupt the protein's native conformation, it successful restored some previously obscured in-cell NMR signals, particularly for proteins with high isoelectric points that decreased post-methylation. SIGNIFICANCE: This study affirms lysine methylation as a feasible approach to enhance the sensitivity of in-cell NMR spectra for protein studies. By mitigating signal loss due to nonspecific interactions, this method expands the utility of in-cell NMR for investigating proteins in their natural cellular environment, potentially leading to more accurate structural and functional insights.