Salinity and Mulching Effects on Nutrition and Production of Grafted Sour Passion Fruit.

The Brazilian semiarid region stands out in terms of sour passion fruit production. Local climatic conditions (high air temperature and low rainfall), combined with its soil properties (rich in soluble salts), increase salinity effects on plants. This study was carried out in the experimental area "Macaquinhos" in Remígio-Paraíba (Brazil). The aim of this research was to evaluate the effect of mulching on grafted sour passion fruit under irrigation with moderately saline water. The experiment was conducted in split-plots in a 2 × (2 × 2) factorial scheme to evaluate the effects of the combination of irrigation water salinity of 0.5 dS m-1 (control) and 4.5 dS m-1 (main plot), passion fruit propagated by seed and grafted onto Passiflora cincinnata, with and without mulching (subplots), with four replicates and three plants per plot. The foliar Na concentration in grafted plants was 90.9% less than that of plants propagated via seeds; however, it did not affect fruit production. Plastic mulching, by reducing the absorption of toxic salts and promoting greater absorption of nutrients, contributed to greater production of sour passion fruit. Under irrigation with moderately saline water, the plastic film in the soil and seed propagation promote higher production of sour passion fruit.

Biofertilizer and reduction of water losses in soil cultivated with tomato irrigated with moderately saline water

In semi-arid regions, agricultural production is often limited due to scarcity and rainfall irregularities, and, therefore, the production system depends on irrigation. In this direction, the research aimed to evaluate the influence of the reduction of water losses in the soil through the coating of the lateral faces of the planting furrows with plastic film, by lateral infiltration of water and bovine biofertilizers for growth in height, production, and chlorophyll responses of tomato cv. Fascínio F1 irrigated with moderately saline water. The experiment was carried out in randomized blocks, in a 2 × 3 factorial scheme, with 4 replicates and 21 plants per plot. Different conditions were used and compared with each other: the furrow had side coating or not, and the soil received a common biofertilizer (fresh lactating bovine manure), chemically enriched fertilizer (common biofertilizer, milk, molasses, and gypsum), or no fertilizer at all. The variables evaluated were soil moisture, plant height, a, b, and total chlorophyll content, number and average fruit mass, tomato production, and productivity. The enriched bovine biofertilizer associated with the lateral furrow coating increased the synthesis of chlorophyll pigments, the number of fruits per plant, and the productivity of tomato cv. Fascínio F1. Protecting the faces of the furrows against water losses from the root environment of plants keeps the soil moist, stimulates the synthesis of chlorophyll, and increases the average mass of the fruits. The common bovine biofertilizer promotes greater growth in plant height, and the chemically enriched biofertilizer increases the average weight of tomato fruits.

Postharvest conservation of Formosa 'Tainung 1' papaya under refrigeration, modified atmosphere, and chitosan

The objective of this work is to evaluate the use of modified atmosphere and chitosan as an alternative to chemical treatment in postharvest conservation of 'Tainung 1' papaya under refrigeration. The experiment comprised of completely randomized blocks with four replications, one fruit per replication, with a 2 × 4 × 4 factorial design as follows: two types of packaging (with or without polyvinyl chloride [PVC] stretchable film, thickness of 17 µm), four treatments (control, 2% chitosan, 4% chitosan, and prochloraz fungicide with 33.75 g a.i.·100 L­1), and four storage periods (0, 7, 14, and 21 days) at 10 °C and relative humidity (RH) of 90 ± 5%. The variables evaluated were mass loss (ML), external appearance, titratable acidity (TA), soluble solids (SS), vitamin C, reducing sugars (RS), and total sugars (TS). The storage of 'Formosa' papaya under refrigeration at 10 °C and RH of 90 ± 5% associated with PVC provided a low percentage of ML and longer conservation time of apparent quality (up to 7 days) in relation to fruits with no storage in PVC. The external appearance of fruits was preserved for up to 14 days by the PVC + 4% chitosan treatment and for up to 21 days by the PVC + prochloraz fungicide treatment. The treatment PVC + 4% chitosan associated with refrigeration is efficient in maintaining fruit quality. It is, for up to 14 days, a viable alternative to the use of prochloraz fungicide for postharvest conservation of 'Formosa' papaya.

Effect of sealing on the feed out face of trench silos on the performance of confined calves / [Efeito da vedação na porção inicial de silos trincheiras sobre o desempenho de novilhos confinados]

This study aimed to evaluate the productive performance, dry matter intake, apparent digestibility and ingestive behavior of feedlot calves fed corn silage from the feed out face of trench silos with different types of sealing. The animals were divided into three treatments with four repetitions: Conventional seal - double-sided polyethylene of 110µm thickness; Double-sided seal - double-sided polyethylene of 200µm thickness; and Double seal - composed of double face polyethylene with a thickness of 80µm superimposed on a polyamide translucent vacuum film with a thickness of 20µm. The use of double face sealing provided 12.63% increase in average daily gain and improved food conversion by 0.62 percentage points. The apparent digestibility of the diet with double-face sealing system silage was 4.30% higher than the diet with double-face sealing silage and 11.00% higher than the diet with conventional sealing silage. It is recommended to use the double face sealing with 200µm polyethylene and double face sealing with 80µm thick polyethylene on top of a 20µm thick polyamide translucent vacuum film.(AU)

Objetivou-se avaliar o desempenho produtivo, o consumo de matéria seca, a digestibilidade aparente e o comportamento ingestivo de novilhos confinados, alimentados com silagem de milho da porção inicial de silos do tipo trincheira, conservada sob distintos tipos de vedação. Os animais foram divididos em três tratamentos, com quatro repetições: vedação convencional - polietileno tipo dupla face, com espessura de 110µm; vedação dupla face - polietileno tipo dupla face, com espessura de 200µm; e dupla vedação - polietileno tipo dupla face, com espessura de 80µm sobreposto a um filme vácuo translúcido de poliamida, com espessura de 20µm. O uso da vedação dupla face proporcionou incremento de 12,63% no ganho de peso médio diário e melhorou em 0,62 ponto percentual a conversão alimentar. A digestibilidade aparente da dieta com silagem do sistema de vedação dupla face foi 4,30% superior em relação à dieta com silagem da dupla vedação e 11,00% superior à dieta com silagem da vedação convencional. Recomenda-se a utilização tanto da vedação dupla face com polietileno de 200µm quanto da dupla vedação com polietileno tipo dupla face, com espessura de 80µm, sobreposto a um filme vácuo translúcido de poliamida com espessura de 20µm.(AU)

Plastic ingestion by a generalist seabird on the coast of Uruguay.

We analyzed plastic ingestion by Kelp Gull (Larus dominicanus) from 806 pellets collected between 2011 and 2013. Employing a Raman spectroscopy, we characterized those polymers used to produce the plastics ingested. Debris was recorded in 143 pellets (%FO=17.7%, n=202, 92.58g). Plastic was found in 119 pellets (%FO=83%) and non-plastic occurred in 56 pellets (%FO=39%). The most important debris category was plastic film with 55.3% (n=79). Plastic bags were observed in 19 pellets (%FO=2.4%, weight=25.02g). Glass was the second most important component (%FO=18.9%) followed by plastic fragments (%FO=17.8%). Plastic debris represented the 65.3% of the debris fragments (n=132, weight=58.84g), and was composed by polyethylene (52%), polypropylene (26%), polyamide (12%), polystyrene (6%), polyvinyl chloride (2%), and polyethylene terephthalate (2%). How plastics were obtained by gulls and the effects on individuals are discussed, as well as environmental considerations about plastic pollution on coastal environments.