ABSTRACT
In biological systems, nanoparticles interact with biomolecules, which may undergo protein corona formation that can result in noncontrolled aggregation. Therefore, comprehending the behavior and evolution of nanoparticles in the presence of biological fluids is paramount in nanomedicine. However, traditional lab-based colloid methods characterize diluted suspensions in low-complexity media, which hinders in-depth studies in complex biological environments. Here, we apply X-ray photon correlation spectroscopy (XPCS) to investigate silica nanoparticles (SiO2) in various environments, ranging from low to high complex biological media. Interestingly, SiO2 revealed Brownian motion behavior, irrespective of the complexity of the chosen media. Moreover, the SiO2 surface and media composition were tailored to underline the differences between a corona-free system from protein corona and aggregates formation. Our results highlighted XPCS potential for real-time nanoparticle analysis in biological media, surpassing the limitations of conventional techniques and offering deeper insights into colloidal behavior in complex environments.
Subject(s)
Nanoparticles , Protein Corona , Silicon Dioxide , Silicon Dioxide/chemistry , Nanoparticles/chemistry , Protein Corona/chemistry , Photons , Colloids/chemistry , Surface PropertiesABSTRACT
When silica nanoparticles (SiNP) reach the water bodies interact with the already existing pollutants in the environments. This study aimed to evaluate the ecotoxicity of SiNP under the presence/absence of Cu in mosquitofish (Gambusia holbrooki). Fish were exposed to 0, 10 and 100 mg SiNP L-1, alone or mixed with Cu (0.25 mg L-1). After 96 h, the amount of colony forming units (CFU) of bacteria living on the skin mucus was analysed, and oxidative stress, tissue damage enzymes, and neurotoxicity were evaluated. We observed a reduction in CFU when Cu was present in the media. The liver was the target organ, evidencing a decrease in tissue damage enzymatic activities, activation of the antioxidant system in all treatments, and lipid oxidative damage when the SiNP and Cu were mixed. Overall, SiNP ecotoxicity was proved, which could also be enhanced by the presence of ubiquitous elements such as metals.
Subject(s)
Cyprinodontiformes , Water Pollutants, Chemical , Animals , Copper/toxicity , Oxidative Stress , Antioxidants , Cyprinodontiformes/physiology , Water Pollutants, Chemical/toxicityABSTRACT
Stimuli-responsive nanocarriers are being widely applied in the development of new strategies for the diagnosis and treatment of diseases. An inherent difficulty in general drug therapy is the lack of precision with respect to a specific pathological site, which can lead to toxicity, excessive drug consumption, or premature degradation. In this work, the controlled drug delivery is achieved by using magnetite nanoparticles coated with mesoporous silica with core-shell structure (MMS) and grafted with the thermoresponsive polymer poly [N-isopropylacrylamide-co-3-(trimethoxysilyl)propyl methacrylate] (MMS-P). The efficiency of MMS-P as a temperature-controlled drug delivery system was evaluated by in vitro release experiments using ibuprofen (IBU) in various mammalian cell models. Further, the effects of IBU as a photoprotectant in cells exposed to photodynamic therapy (PDT) in a carbaryl-induced neurodegenerative model were evaluated. The results showed that MMS-P nanocarriers do not exhibit cytotoxicity in HepG2 cells at high doses such as 7600 µg mL-1. Pre-incubation of MMS-P charged with IBU showed no effect on the PDT in N2A cells; however, it produced a further decrease in the viability of HepG2 cells, leading to a reduction to PDT resistance. On the other hand, a cytoprotective effect against carbaryl toxicity in N2A cells was observed in IBU administrated by MMS-P, which confirms the effective intracellular IBU uptake by means of MMS-P. These results encourage the potential application of MMS-P as a drug delivery system and confirm the effect of IBU as a cytoprotective agent in a neurodegenerative model.
Subject(s)
Ibuprofen , Nanoparticles , Ibuprofen/chemistry , Carbaryl , Drug Delivery Systems , Polymers/chemistry , Magnetic Phenomena , Silicon Dioxide/chemistry , Nanoparticles/chemistryABSTRACT
Stimuli-responsive nanomaterials have emerged as a promising strategy for inclusion in anticancer therapy. In particular, pH-responsive silica nanocarriers have been studied to provide controlled drug delivery in acidic tumor microenvironments. However, the intracellular microenvironment that the nanosystem must face has an impact on the anticancer effect; therefore, the design of the nanocarrier and the mechanisms that govern drug release play a crucial role in optimizing efficacy. Here, we synthesized and characterized mesoporous silica nanoparticles with transferrin conjugated on their surface via a pH-sensitive imine bond (MSN-Tf) to assess camptothecin (CPT) loading and release. The results showed that CPT-loaded MSN-Tf (MSN-Tf@CPT) had a size of ca. 90 nm, a zeta potential of -18.9 mV, and a loaded content of 13.4%. The release kinetic data best fit a first-order model, and the predominant mechanism was Fickian diffusion. Additionally, a three-parameter model demonstrated the drug-matrix interaction and impact of transferrin in controlling the release of CPT from the nanocarrier. Taken together, these results provide new insights into the behavior of a hydrophobic drug released from a pH-sensitive nanosystem.
ABSTRACT
The limited delivery of cargoes at the cellular level is a significant challenge for therapeutic strategies due to the presence of numerous biological barriers. By immobilizing the Buforin II (BUF-II) peptide and the OmpA protein on magnetite nanoparticles, a new family of cell-penetrating nanobioconjugates was developed in a previous study. We propose in this study to extend this strategy to silica nanoparticles (SNPs) and silanized fullerenol (F) as nanostructured supports for conjugating these potent cell-penetrating agents. The same molecule conjugated to distinct nanomaterials may interact with subcellular compartments differently. On the obtained nanobioconjugates (OmpA-SNPs, BUF-II-PEG12-SNPs, OmpA-F, and BUF-II-PEG12-F), physicochemical characterization was performed to evaluate their properties and confirm the conjugation of these translocating agents on the nanomaterials. The biocompatibility, toxicity, and internalization capacity of nanobioconjugates in Vero cells and THP-1 cells were evaluated in vitro. Nanobioconjugates had a high internalization capacity in these cells without affecting their viability, according to the findings. In addition, the nanobioconjugates exhibited negligible hemolytic activity and a low tendency to induce platelet aggregation. In addition, the nanobioconjugates exhibited distinct intracellular trafficking and endosomal escape behavior in these cell lines, indicating their potential for addressing the challenges of cytoplasmic drug delivery and the development of therapeutics for the treatment of lysosomal storage diseases. This study presents an innovative strategy for conjugating cell-penetrating agents using silica nanoparticles and silanized fullerenol as nanostructured supports, which has the potential to enhance the efficacy of cellular drug delivery.
ABSTRACT
Industrial effluents and wastewater treatment have been a mainstay of environmental preservation and remediation for the last decade. Silica nanoparticles (SiO2) obtained from rice husk (RH) are an alternative to producing low-cost adsorbent and agriculture waste recovery. One adsorption challenge is facilitating the adsorbate separation and reuse cycle from aqueous medium. Thus, the present work employs SiO2 supported on polylactic acid (PLA) nanofibers obtained by the electrospinning method for Rhodamine B (RhB) dye adsorption. The silica surface was modified with trimethylsilyl chloride (TMCS) to increase affinity towards organic compounds. As a result, the silanized surface of the silica from rice husk (RHSil) promoted an increase in dye adsorption attributed to the hydrophobic properties. The PLA fibers containing 40% SiO2 (w w-1) showed about 85-95% capacity adsorption. The pseudo-first-order kinetic model was demonstrated to be the best model for PLA:SiO2 RHSil nanocomposites, exhibiting a 1.2956 mg g-1 adsorption capacity and 0.01404 min-1 kinetic constant (k1) value. In the reuse assay, PLA:SiO2 membranes preserved their adsorption activity after three consecutive adsorption cycles, with a value superior to 60%. Therefore, PLA:SiO2 nanocomposites from agricultural waste are an alternative to "low-cost/low-end" treatments and can be used in traditional treatment systems to improve dye removal from contaminated waters.
ABSTRACT
The objective of this study was to assess the effectiveness of functionalized bionanocompounds with ice nucleation protein (INP) as a novel approach for freezing applications in terms of how much energy is used during each step of freezing when water bionanocompound solutions were compared with pure water. According to the results of the manufacturing analysis, water required 28 times less energy than the silica + INA bionanocompound and 14 times less than the magnetite + INA bionanocompound. These findings showed that water used the least energy during the manufacturing process. In order to determine the associated environmental implications, an analysis of the operating stage was also conducted, taking the defrosting time of each bionanocompound during a 4 h work cycle into account. Our results showed that bionanocompounds may substantially reduce the environmental effects by achieving a 91% reduction in the impact after their use during all four work cycles in the operation stage. Additionally, given the energy and raw materials needed in this process, this improvement was more significant than at the manufacturing stage. The results from both stages indicated that, when compared with water, the magnetite + INA bionanocompound and the silica + INA bionanocompound would save an estimated 7% and 47% of total energy, respectively. The study's findings also demonstrated the great potential for using bionanocompounds in freezing applications to reduce the effects on the environment and human health.
ABSTRACT
Polymer flooding is one of the enhanced oil recovery (EOR) methods that increase the macroscopic efficiency of the flooding process and enhanced crude oil recovery. In this study, the effect of silica nanoparticles (NP-SiO2) in xanthan gum (XG) solutions was investigated through the analysis of efficiency in core flooding tests. First, the viscosity profiles of two polymer solutions, XG biopolymer and synthetic hydrolyzed polyacrylamide (HPAM) polymer, were characterized individually through rheological measurements, with and without salt (NaCl). Both polymer solutions were found suitable for oil recovery at limited temperatures and salinities. Then, nanofluids composed of XG and dispersed NP-SiO2 were studied through rheological tests. The addition of nanoparticles was shown to produce a slight effect on the viscosity of the fluids, which was more remarkable over time. Interfacial tension tests were measured in water-mineral oil systems, without finding an effect on the interfacial properties with the addition of polymer or nanoparticles in the aqueous phase. Finally, three core flooding experiments were conducted using sandstone core plugs and mineral oil. The polymers solutions (XG and HPAM) with 3% NaCl recovered 6.6% and 7.5% of the residual oil from the core, respectively. In contrast, the nanofluid formulation recovered about 13% of the residual oil, which was almost double that of the original XG solution. The nanofluid was therefore more effective at boosting oil recovery in the sandstone core.
ABSTRACT
Cinnamon (Cinnamomum zeylanicum Blume) essential oil has vast potential as an antimicrobial but is limited by its volatility and rapid degradation. To decrease its volatility and prolong the efficacy of the biocide, cinnamon essential oil was encapsulated into mesoporous silica nanoparticles (MSNs). The characterization of MSNs and cinnamon oil encapsulated with silica nanoparticles (CESNs) was estimated. Additionally, their insecticidal activity against the rice moth Corcyra cephalonica (Stainton) larvae was evaluated. The MSN surface area decreased from 893.6 to 720 m2 g-1 and the pore volume also decreased from 0.824 to 0.7275 cc/g after loading with cinnamon oil. X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and N2 sorption by Brunauer-Emmett-Teller (BET) confirmed the successful formation and evolution of the synthesized MSNs and CESN structures. The surface characteristics of MSNs and CESNs were analyzed by scanning and transmission electron microscopy. Compared with the sub-lethal activity values, the order of toxicity after 6 days of exposure was MSNs Ë CESN Ë cinnamon oil Ë silica gel Ë peppermint oil. The efficacy of CESNs gradually increases its toxicity more than MSN after the 9th day of exposure.
Subject(s)
Moths , Nanoparticles , Oils, Volatile , Animals , Cinnamomum zeylanicum , Silicon Dioxide/chemistry , Nanoparticles/chemistryABSTRACT
Commonly found colonizing the human microbiota, Candida albicans is a microorganism known for its ability to cause infections, mainly in the vulvovaginal region known as vulvovaginal candidiasis (VVC). This pathology is, in fact, one of the main C. albicans clinical manifestations, changing from a colonizer to a pathogen. The increase in VVC cases and limited antifungal therapy make C. albicans an increasingly frequent risk in women's lives, especially in immunocompromised patients, pregnant women and the elderly. Therefore, it is necessary to develop new therapeutic options, especially those involving natural products associated with nanotechnology, such as lycopene and mesoporous silica nanoparticles. From this perspective, this study sought to assess whether lycopene, mesoporous silica nanoparticles and their combination would be an attractive product for the treatment of this serious disease through microbiological in vitro tests and acute toxicity tests in an alternative in vivo model of Galleria mellonella. Although they did not show desirable antifungal activity for VVC therapy, the present study strongly encourages the use of mesoporous silica nanoparticles impregnated with lycopene for the treatment of other human pathologies, since the products evaluated here did not show toxicity in the in vivo test performed, being therefore, a topic to be further explored.
Subject(s)
Candidiasis, Vulvovaginal , Fluconazole , Female , Humans , Pregnancy , Aged , Candida , Silicon Dioxide/therapeutic use , Lycopene/pharmacology , Lycopene/therapeutic use , Candidiasis, Vulvovaginal/drug therapy , Candidiasis, Vulvovaginal/microbiology , Antifungal Agents/pharmacology , Antifungal Agents/therapeutic use , Candida albicans , Microbial Sensitivity TestsABSTRACT
Alzheimer's disease (AD) is a neurodegenerative disorder characterized by cognitive and behavioral impairment. Curcumin-loaded mesoporous silica nanoparticles (MSN-CCM) can overcome the drawbacks related to the free curcumin (CCM) clinical application, such as water insolubility and low bioavailability, besides acting over the main causes associated to AD. A thermo-responsive hydrogel is an interesting approach for facilitating the administration of the nanosystem via a nasal route, as well as for overcoming mucociliary clearance mechanisms. In light of this, MSN-CCM were dispersed in the hydrogel and evaluated through in vitro and in vivo assays. The MSNs and MSN-CCM were successfully characterized by physicochemical analysis and a high value of the CCM encapsulation efficiency (EE%, 87.70 ± 0.05) was achieved. The designed thermo-responsive hydrogel (HG) was characterized by rheology, texture profile analysis, and ex vivo mucoadhesion, showing excellent mechanical and mucoadhesive properties. Ex vivo permeation studies of MSN-CCM and HG@MSN-CCM showed high permeation values (12.46 ± 1.08 and 28.40 ± 1.88 µg cm-2 of CCM, respectively) in porcine nasal mucosa. In vivo studies performed in a streptozotocin-induced AD model confirmed that HG@MSN-CCM reverted the cognitive deficit in mice, acting as a potential formulation in the treatment of AD.
ABSTRACT
Commercially available oxygen scavengers used to prevent lipid autoxidation, microbial growth and enzymatic browning in food products present several issues, which include the usage of metals and their moisture dependence to work properly. We present the synthesis and characterization of a moisture-independent oil-based oxygen scavenging system comprised of linseed oil and silica nanoparticles. The system was synthesized via sol-gel chemistry and was characterized using morphological analysis (SEM, AFM, TEM, and N2 adsorption/desorption), oil-loading analysis (TGA), and surface analysis (ζ-potential and ATR-FTIR). Performance of the system was evaluated through headspace measurements and reproducibility of synthetic procedure was verified using six replicates. Nanoparticles showed the desired spherical shape with a diameter of (122.7 ± 42.7 nm) and mesoporosity (pore diameter = 3.66 ± 0.08 nm), with an encapsulation efficiency of 33.9 ± 1.5% and a highly negative ζ-potential (-56.1 ± 1.2 mV) in basic solution. Performance of the system showed a promising high value for oxygen absorption of 25.8 ± 4.5 mL O2/g of encapsulated oil (8.3 ± 1.5 mL O2/g of nanocapsules) through a moisture independent mechanism, which suggests that the synthesized system can be used as an oxygen scavenger in dry atmosphere conditions.
ABSTRACT
The degradation of mesoporous silica nanoparticles (MSNs) in the biological milieu due to silica hydrolysis plays a fundamental role for the delivery of encapsulated drugs and therapeutics. However, little is known on the evolution of the pore arrangement in the MSNs in biologically relevant conditions. Small Angle X-ray scattering (SAXS) studies were performed on unmodified and PEGylated MSNs with a MCM-48 pore structure and average sizes of 140 nm, exposed to simulated body fluid solution (SBF) at pH 7.4 for different time intervals from 30 min to 24 h. Experiments were performed with silica concentrations below, at and over 0.14 mg/mL, the saturation concentration of silica in water at physiological temperature. At silica concentrations of 1 mg/mL (oversaturation), unmodified MSNs show variation in interpore distances over 6 h exposure to SBF, remaining constant thereafter. A decrease in radius of gyration is observed over the same time. Mesoporosity and radius of gyration of unmodified MSNs remain then unchanged up to 24 h. PEGylated MSNs at 1 mg/mL concentration show a broader diffraction peak but no change in the position of the peak is observed following 24 h exposure to SBF. PEGylated MSNs at 0.01 mg/mL show no diffraction peaks already after 30 min exposure to SBF, while at 0.14 mg/mL a small diffraction peak is present after 30 min exposure but disappears after 1 h.
ABSTRACT
Pharmaceutical nanotechnology has become a trend with incalculable advantages in the applicability of systems in the controlled, safe and effective release of drugs. Among the nanotechnological nanoparticles, the mesoporous silica nanoparticles stand out, a system with significant biocompatibility, good physical chemical stability, greater surface contact area with desirable and adjustable pore structure. Once developed and well defined, these pores can carry drugs and control their release. However, to create this type of nanoparticle is essencial to use surfactants since they act as pore template. Among the most important surfactants, cetyltrimethylammonium bromide (CTAB) highlights, a quaternary ammonium compound widely used as a surfactant in the synthesis of mesoporous silica nanoparticles (MSNs), hollow mesoporous silica (HMSNs) and core-shell MSNs. However, for achieving good results of drug-loaded pores it is necessary to remove CTAB by extraction techniques, which provides pores formation throughout the silica and the incorporation of molecules. During and after the removal process, it is possible that CTAB residues remains inside the pores, despide several removal processes are described as efficient in the complete removal of surfactants. In turn, the presence of CTAB residues can be advantageous, especially when considering its antimicrobial activity. Meanwhile, it should be noted that the presence of CTAB may present high toxicity risks. This review seeks to explore not only general aspects of the use of CTAB in the synthesis of MSNs, but also to assess its toxicity in prokaryotic and eukaryotic cells, in order to determine whether CTAB residues are acceptable in MSNs that will be used as drug delivery systems for further in vivo and clinical assays.
Subject(s)
Nanoparticles , Silicon Dioxide , Cetrimonium , Porosity , Surface-Active AgentsABSTRACT
Neurodegenerative diseases (NDs) are considered public health problem characterized by neural loss causing cognitive and behavioral impairments. It is currently possible to use drugs capable of controlling the symptoms caused by these diseases. However, treatment is not able to prevent neural loss. In addition, poor solubility, low bioavailability due to the inability for crossing the blood-brain barrier (BBB) are described as the main limitations of the treatment. Nanotechnology involves the development of nanoscale drug delivery systems and they have been employed to optimize therapeutics face to several diseases treatment. In light of this, this review describes the highlights on the fabrication of nanotechnology-based drug delivery systems emphasizing mesoporous silica, gold and silver nanoparticles (MSNs, AuNPs and AgNPs, respectively) and their biological behavior for the treatment of Alzheimer's and Parkinson diseases (ADs and PDs, respectively).
Subject(s)
Metal Nanoparticles , Nanoparticles , Neurodegenerative Diseases , Drug Delivery Systems , Gold/therapeutic use , Humans , Neurodegenerative Diseases/drug therapy , Porosity , Silicon Dioxide/therapeutic use , SilverABSTRACT
The effect of silica nanoparticles (NP-SiO2) in xanthan gum (XG) solutions was investigated through the analysis of viscosity profiles. First, hydrocolloid XG solutions and hydrophilic NP-SiO2 suspensions were characterized individually through rheological measurements, with and without salt (NaCl). Then, nanofluids composed of XG and NP-SiO2 dispersed in water and brine were studied through two different aging tests. The addition of nanoparticles was shown to produce a slight effect on the viscosity of the fresh fluids (initial time), while a more remarkable effect was observed over time. In particular, it appears that the presence of NP-SiO2 stabilizes the polymer solution by maintaining its viscosity level in time, due to a delay in the movement of the molecule. Finally, characterization techniques such as confocal microscopy, capillary rheometry, and Zeta potential were implemented to analyze the XG/NP-SiO2 interaction. Intrinsic viscosity and relative viscosity were calculated to understand the molecular interactions. The presence of NP-SiO2 increases the hydrodynamic radius of the polymer, indicating attractive forces between these two components. Furthermore, dispersion of the nanoparticles in the polymeric solutions leads to aggregates of an average size smaller than 300 nm with a good colloidal stability due to the electrostatic attraction between XG and NP-SIO2. This study proves the existence of interactions between XG and NP-SiO2 in solution.
ABSTRACT
Spheroids are in vitro three-dimensional multicellular microstructures able to mimic the biological microenvironment, including the complexity of tumor architecture. Therefore, results closer to those expected for in vivo organisms can be reached using spheroids compared to the cell culture monolayer model. Inorganic nanoparticles (NPs) have also been playing relevant roles in the comprehension of biological processes. Moreover, they have been probed as novel diagnostic and therapeutical nanosystems. In this context, in this review, we present applications, published in the last five years, which show that spheroids can be versatile models to study and evaluate biological interactions involving inorganic NPs. Applications of spheroids associated with (i) basic studies to assess the penetration profile of nanostructures, (ii) the evaluation of NP toxicity, and (iii) NP-based therapeutical approaches are described. Fundamentals of spheroids and their formation methods are also included. We hope that this review can be a reference and guide future investigations related to this interesting three-dimensional biological model, favoring advances to Nanobiotechnology.
Subject(s)
Nanoparticles , Nanostructures , Neoplasms , Humans , Spheroids, Cellular , Nanoparticles/chemistry , Cell Culture Techniques , Tumor MicroenvironmentABSTRACT
Beef is a fundamental part of the human diet, but it is highly susceptible to microbiological and physicochemical deterioration which decrease its shelf life. This work aimed to formulate an active edible film (AEF) incorporated with amino-functionalized mesoporous silica nanoparticles (A-MSN) loaded with Mexican oregano (Lippia graveolens Kunth) essential oil (OEO) and to evaluate its effect as a coating on fresh beef quality during refrigerated storage. The AEF was based on amaranth protein isolate (API) and chitosan (CH) (4:1, w/w), to which OEO emulsified or encapsulated in A-MSN was added. The tensile strength (36.91 ± 1.37 MPa), Young's modulus (1354.80 ± 64.6 MPa), and elongation (4.71%) parameters of AEF made it comparable with synthetic films. The antimicrobial activity of AEF against E. coli O157:H7 was improved by adding 9% (w/w) encapsulated OEO, and interactions of glycerol and A-MSN with the polymeric matrix were observed by FT-IR spectroscopy. In fresh beef, after 42 days, AEF reduced the population growth (Log CFU/cm2, relative to uncoated fresh beef) of Brochothrix thermosphacta (5.5), Escherichia coli (3.5), Pseudomonas spp. (2.8), and aerobic mesophilic bacteria (6.8). After 21 days, odor acceptability of coated fresh beef was improved, thus, enlarging the shelf life of the beef and demonstrating the preservation capacity of this film.
Subject(s)
Edible Films , Lippia , Nanoparticles , Oils, Volatile , Origanum , Animals , Cattle , Humans , Oils, Volatile/pharmacology , Oils, Volatile/chemistry , Origanum/chemistry , Lippia/chemistry , Food Preservation/methods , Food Microbiology , Escherichia coli , Spectroscopy, Fourier Transform Infrared , Food Packaging/methodsABSTRACT
Nitric oxide (NO) has emerged as a promising antibacterial agent, where NO donor compounds have been explored. Here, we investigated the role of a silica nanoparticle containing nitroprusside (MPSi-NP) as a NO donor agent against methicillin-sensitive (ATCC 25,923 and ATCC 12228) and methicillin-resistant (ATCC 700,698 and ATCC 35984) Staphylococcus strains. Biofilm inhibition was studied along with antibiotic activity in combination with standard antibiotics (ampicillin and tetracycline). MPSi-NP exhibited thermal release of 63% of NO within 24 h, while free nitroprusside released only 18% during a dialysis assay, indicating an assisted release of NO mediated by the nanoparticles. This nanomaterial showed only a moderate activity in blocking biofilm production, but exhibited a significant decrease in the number of viable bacterial cells (over 600-fold for Staphylococcus aureus ATCC 700,698 and Staphylococcus epidermidis ATCC 35984). Remarkably, even using MPSi-NP at concentrations below any antibacterial action, its combination with ampicillin promoted a significant decrease in MIC for resistant strains of S. aureus ATCC 700,698 (2-fold) and S. epidermidis ATCC 35,984 (4-fold). A carbopol-based gel formulation with MPSi-NP (0.5% w/w) was prepared and showed a zone of inhibition of 7.7 ± 0.6 mm for S. epidermidis ATCC 35984. Topical use of MPSi-NP in combination with antibiotics might be a manageable strategy to prevent and eventually treat complicated resistant bacterial infections.
Subject(s)
Methicillin-Resistant Staphylococcus aureus , Staphylococcal Infections , Anti-Bacterial Agents/pharmacology , Biofilms , Humans , Microbial Sensitivity Tests , Nitric Oxide Donors/pharmacology , Renal Dialysis , Staphylococcus aureusABSTRACT
Solanum lycopersicum L. is affected among other pests and diseases, by the actinomycete Clavibacter michiganensis subsp. michiganensis (Cmm), causing important economic losses worldwide. Antimicrobial peptides (AMPs) are amphipathic cationic oligopeptides with which the development of pathogenic microorganisms has been inhibited. Therefore, in this study, we evaluate antimicrobial activity of mesoporous silica nanoparticles (MSN5.4) loaded with human ß-defensin-2 (hßD2) and two mutants (TRX-hßD2-M and hßD2-M) against Cmm. hßD2, TRX-hßD2-M and hßD2-M presented a half-maximum inhibitory concentration (IC50) of 3.64, 1.56 and 6.17 µg/mL, respectively. MSNs had average particle sizes of 140 nm (SEM) and a tunable pore diameter of 4.8 up to 5.4 nm (BJH). AMPs were adsorbed more than 99% into MSN and a first release after 24 h was observed. The MSN loaded with the AMPs inhibited the growth of Cmm in solid and liquid media. It was also determined that MSNs protect AMPs from enzymatic degradation when the MSN/AMPs complexes were exposed to a pepsin treatment. An improved AMP performance was registered when it was adsorbed in the mesoporous matrix. The present study could expand the applications of MSNs loaded with AMPs as a biological control and provide new tools for the management of phytopathogenic microorganisms.