Bacillus velezensis strain NA16 shows high poultry feather-degrading efficiency, protease and amino acid production.

Isolated Bacillus velezensis strain NA16, which produces proteases, amino acids and the transcription levels of different keratinolytic enzymes and disulfide reductase genes in whole gene sequencing, was evaluated during feather degradation. The result shows under optimum fermentation conditions, chicken feather fermentation showed total amino acid concentration of 7599 mg/L, degradation efficiency of 99.3% at 72 h, and protease activity of 1058 U/mL and keratinase activity of 288 U/mL at 48 h. Goose feather fermentation showed total amino acid concentration of 4918 mg/L (96 h), and degradation efficiency was 98.9% at 120 h. Chicken feather fermentation broth at 72 h showed high levels of 17 amino acids, particularly phenylalanine (1050 ± 1.90 mg/L), valine (960 ± 1.04 mg/L), and glutamic (950 ± 3.00 mg/L). Scanning electron microscopy and Fourier transform infrared analysis revealed the essential role of peptide bond cleavage in structural changes and degradation of feathers. Protein purification and zymographic analyses revealed a key role in feather degradation of the 39-kDa protein encoded by gene1031, identified as an S8 family serine peptidase. Whole genome sequencing of NA16 revealed 26 metalloproteinase genes and 22 serine protease genes. Among the proteins, S8 family serine peptidase (gene1031, gene1428) and S9 family peptidase (gene3132) were shown by transcription analysis to play major roles in chicken feather degradation. These findings revealed the transcription levels of different families of keratinolytic enzymes in the degradation of feather keratin by microorganisms, and suggested potential applications of NA16 in feather waste management and amino acid production.

Effect of landfilling time on physico-chemical properties of combustible fractions in excavated waste.

Excavated waste is a byproduct of microbial decomposition and fermentation following landfill disposal. The effective management and utilization of excavated waste offer broad prospects for environmental and resource protection, as well as economic growth. While current research predominantly focuses on plastics in landfills, the physico-chemical properties of excavated waste over extended landfilling time remain unclear. This study aimed to address this gap by excavating waste from a landfill in Tianjin, China, with a maximum landfilling time of 18 years. The findings revealed that, compared to municipal solid waste (MSW), the excavated waste exhibited increased calorific value, ash content, and fixed carbon content after screening the landfill-mined-soil-like-fine fraction. The average calorific value of the excavated waste could reach 57.8 MJ/kg. Additionally, the oxygen content in the excavated combustible waste exceeded that of MSW, increasing from 25.59 % to 34.22 %. This phenomenon is potentially linked to the oxidation of attached soil impurities and waste. The study identified polyethylene (PE), polypropylene (PP), expanded polystyrene (EPS), polyethylene terephthalate (PET), and wood as the primary combustible components. Notably, the excavated waste exhibited a significant decrease in surface gloss, adopting a rough texture with apparent holes, potentially attributed to the acidification and corrosion of organic matter during fermentation. Nevertheless, the breaking of molecular bonds could also contribute to waste fragmentation. Furthermore, an increase in landfilling time resulted in a more pronounced decrease in mechanical properties. For instance, the failure load of PE decreased from 15.61 N to 6.46 N, and PET reduced from 884.83 N to 186.56 N. The chemical composition of excavated waste has changed, with -OH and CO observed in PE with an 18-year landfilling time. In conclusion, these results provide a theoretical foundation for the recycling of excavated waste and contribute to the advancement of waste management and recycling technologies.

Study of nano-hydroxyapatite tagged alkaline protease isolated from Himalayan sub-alpine Forest soil bacteria and role in recalcitrant feather waste degradation.

Purified calcium serine metalloprotease from Stenotrophomonas maltophilia strain SMPB12 exhibits highest enzyme activity at pH 9 and temperature range between 15 °C-25 °C. Enzyme supplemented with 40 µM Ca-Hap-NP (NP-protease) showed maximum elevated activity of 17.29 µmole/min/ml (1.9-fold of original protease activity). The thermostability of the enzyme was maintained for 1 h at 60 °C over an alkaline pH range 7.5-10, as compared to the NP untreated enzyme whose activity was of 8.97 µmole/min/ml. A significant loss of activity with EDTA (1.05 µmole/min/ml, 11.75 %), PMSF (0.93 µmole/min/ml, 10.46 %) and Hg2+ (3.81 µmole/min/ml, 42.49 %) was also observed. Kinetics study of NP-protease showed maximum decreases in Km (28.11 %) from 0.28 mM (NP untreated enzyme) to 0.22 mM (NP-protease) along with maximum increase in Vmax (42.88 %) from 1.25 µmole/min/ml to 1.79 µmole/min/ml at varying temperatures. The enhanced activity of NP-protease was able to efficiently degrade recalcitrant solid wastes like feather to produce value-added products like amino acids and helps in declogging recalcitrant solid wastes. The nano-enabled protease may be utilized in a smaller amount for degrading in bulk recalcitrant solid proteinaceous waste at 15 °C temperature as declogging agents providing an eco-friendly efficient process.

Whole cell of pure Clostridium butyricum CBT-1 from anaerobic bioreactor effectively hydrolyzes agro-food waste into biohydrogen.

Recycling organic waste and converting them into renewable energy are a promising route for environment protection and effective biochemical reactions suitable for industrial hydrogen synthesis. This study targeted to isolate a pure anaerobic culture with potential to hydrolyze different biomass and production of biohydrogen. For this, a sample of full-scale anaerobic digester, fed with a multicomponent solid, was inoculated on Reinforced Clostridial Medium (RCM) in strict anaerobic conditions. An anaerobic Clostridium butyricum CBT-1 strain was isolated, identified from morphological and 16S rRNA sequence. The CBT-1 culture expressed amylase, cellulase and peroxidases activities. The strain exhibited visual decolorization of both Azure B and crystal violet dyes. In batch fermentation experiment, the CBT-1 produced highest of 3.06, 2.67 and 2.46 mol/mol H2 yield from glucose, starch and cellulose respectively, whereas, the CBT-1 showed low 0.43 mol H2/mol of substrate from untreated rice straw due to lignin in compact structure and comparatively high H2 yield of 1.91 and 2.01 mol H2/mol of substrate rice straw hydrolysate and kitchen food waste (KFWS) respectively. The cumulative volumetric yield of H2 was 358.15, 300.8 and 294.5NmL/gSub from glucose, starch and cellulose respectively. Similarly, the cumulative H2 volume was 76.7, 184.4, 237.2 NmL/gVS from untreated rice straw, rice straw hydrolysate and kitchen food waste. This study emphasizes the prospects to find similar robust anaerobic culture for hydrolyzing complex biomass. Such strains could be used as standard co-inoculum for biohydrogen obtaining and as the biocatalyst for commercial scale applications.

Production of a halotolerant endo-1,4-ß-glucanase by a newly isolated Bacillus velezensis H1 on olive mill wastes without pretreatment: purification and characterization of the enzyme.

Facing the critical issue of high production costs for cellulase, numerous studies have focused on improving the efficiency of cellulase production by potential cellulolytic microorganisms using agricultural wastes as substrates, extremophilic cellulases, in particular, are crucial in the biorefinery process because they can maintain activity under harsh environmental conditions. This study aims to investigate the ability of a potential carboxymethylcellulose-hydrolyzing bacterial strain H1, isolated from an Algerian saline soil and identified as Bacillus velezensis, to use untreated olive mill wastes as a substrate for the production of an endo-1,4-ß-glucanase. The enzyme was purified 44.9 fold using only two steps: ultrafiltration concentration and ion exchange chromatography, with final recovery of 80%. Its molecular mass was estimated to be 26 kDa by SDS-PAGE. Enzyme identification by LC-MS analysis showed 40% identity with an endo-1,3-1,4-ß-glucanase of GH-16 family. The highest enzymatic activity was significantly measured on barley ß-glucan (604.5 U/mL) followed by lichenan and carboxymethylcellulose as substrates, confirming that the studied enzyme is an endo-1,4-ß-glucanase. Optimal enzymatic activity was at pH 6.0-6.5 and at 60-65 °C. It was fairly thermotolerant, retaining 76.9% of the activity at 70 °C, and halotolerant, retaining 70% of its activity in the presence of 4 M NaCl. The enzyme had a Vmax of 625 U/min/mL and a high affinity with barley ß-glucan resulting a Km of 0.69 mg/mL. It also showed a significant ability to release cello-oligosaccharides. Based on such data, the H1 endo-1,4-ß-glucanase may have significant commercial values for industry, argo-waste treatment, and other biotechnological applications.

Composition and profiles of volatile organic compounds during waste decomposition by the anaerobic bacteria purified from landfill.

Volatile organic compounds (VOCs) become concerned pollutants in landfill gases, and their composition and concentration varied significantly during waste decomposition. Many environmental factors are known to affect VOC emissions, while the effect of indigenous bacteria in wastes on VOC production remains elusive. In this study, a simplified anaerobic degradation experiment, with the single substrate and the purified bacteria from a landfill, was set up to measure the degradation process and the dynamic changes of VOCs. The experiment excluded the abiotic factors for VOC variation. The two isolated bacteria, identified as Sporanaerobacter acetigenes and Clostridium sporogenes, could anaerobically ferment amino acids by Stickland reaction. They produced 51 and 57 species of VOCs in the experiment, respectively. The concentration changes of VOCs over bacterial growth and fermentation were clustered into four types by principal component analysis: three profiles were regular, similar to the variation of nitrate, hydrogen sulfide, and the major fermentation products (carbon dioxide, ammonium, and volatile organic acids), respectively; while one profile was unique to any degradation indicator. The various concentration profiles indicated different origins for VOCs, possibly from the extracellular environment, fermentation, and secondary reactions. The findings provide insights into the understanding of VOC diversity and variability during waste decomposition.

A Nuclear Magnetic Resonance (NMR) Platform for Real-Time Metabolic Monitoring of Bioprocesses.

We present a Nuclear Magnetic Resonance (NMR) compatible platform for the automated real-time monitoring of biochemical reactions using a flow shuttling configuration. This platform requires a working sample volume of ∼11 mL and it can circulate samples with a flow rate of 28 mL/min., which makes it suitable to be used for real-time monitoring of biochemical reactions. Another advantage of the proposed low-cost platform is the high spectral resolution. As a proof of concept, we acquire 1H NMR spectra of waste orange peel, bioprocessed using Trichoderma reesei fungus, and demonstrate the real-time measurement capability of the platform. The measurement is performed over more than 60 h, with a spectrum acquired every 7 min, such that over 510 data points are collected without user intervention. The designed system offers high resolution, automation, low user intervention, and, therefore, time-efficient measurement per sample.

Microbiology of municipal solid waste landfills: a review of microbial dynamics and ecological influences in waste bioprocessing.

Municipal solid waste landfills are widely used as a waste management tool and landfill microbiology is at the core of waste degradation in these ecosystems. This review investigates the microbiology of municipal solid waste landfills, focusing on the current state of knowledge pertaining to microbial diversity and functions facilitating in situ waste bioprocessing, as well as ecological factors influencing microbial dynamics in landfills. Bioprocessing of waste in municipal landfills emanates from substrate metabolism and co-metabolism by several syntrophic microorganisms, resulting in partial transformation of complex substrates into simpler polymeric compounds and complete mineralisation into inorganic salts, water and gases including the biofuel gas methane. The substrate decomposition is characterised by evolution and interactions of different bacterial, archaeal and fungal groups due to prevailing biotic and abiotic conditions in the landfills, allowing for hydrolytic, fermentative, acetogenic and methanogenic processes to occur. Application of metagenomics studies based on high throughput Next Generation Sequencing technique has advanced research on profiling of the microbial communities in municipal solid waste landfills. However, functional diversity and bioprocess dynamics, as well as key factors influencing the in situ bioprocesses involved in landfill waste degradation; the very elements that are key in determining the efficiency of municipal landfills as tools of waste management, remain ambiguous. Such gaps also hinder progressive understanding of fundamentals that underlie technology development based on waste biodegradation, and exploration of municipal waste as a bioresource.

Microbial Keratinases: Enzymes with Promising Biotechnological Applications.

Keratin is a complex and structurally stable protein found in human and animal hard tissues, such as feathers, wool, hair, hoof and nails. Some of these, like feathers and wool, represent one of the main sources of protein-rich waste with significant potential to be transformed into value-added products such as feed, fertilizers or bioenergy. A major limitation impeding valorization of keratinous substrates is their recalcitrant structure and resistance to hydrolysis by common proteases. However, specialized keratinolytic enzymes produced by some microorganisms can efficiently degrade these substrates. Keratinases have already found a purpose in pharmaceutical, textile and leather industries. However, their wider implementation in other processes, such as cost-effective (pre)treatment of poultry waste, still requires optimization of production and performance of the available enzymes. Here we present a comprehensive review covering molecular properties and characteristics of keratinases, their classification, traditional and novel approaches in discovery of novel enzymes, production, characterization, improvement and biotechnological applications.

A process for complete biodegradation of shrimp waste by a novel marine isolate Paenibacillus sp. AD with simultaneous production of chitinase and chitin oligosaccharides.

Disposal of chitinaceous waste is a major problem of seafood industry. Most of the known chitinolytic organisms have been studied with respect to pure chitin as substrate. Use of these organisms for degradation of seafood waste has not been explored much. In present study a marine bacterium capable of proficiently degrading shrimp waste with co-production of value added products like chitinase and chitin oligosaccharides was isolated from seafood waste dumping sites. On 16s rRNA and biochemical analysis bacterium was found to be a novel species of genus Paenibacillus.Under optimized condition complete shrimp waste degradation (99%) was achieved along with chitinase yield of 20.01 IUml-1. SEM and FTIR showed the structural changes and breakage of bonds typical to that of chitin, which indicated that this process can be used for the degradation of other chitinaceous material also. Thin layer chromatography revealed the presence of chitin oligosaccharides of various degree of polymerization in the hydrolysate. Complete degradation of shrimp waste by Paenibacillus sp. AD makes it a potential candidate for the bioremediation of seafood waste at large scale. Concomitant production of chitinase and chitin oligosaccharides further makes the process economical and commercially viable.

Enhanced performance of the aerobic landfill reactor by augmentation of manganese peroxidase.

The aim of the work discussed in this article was to determine the ability of an MnP augmented aerobic waste cell to reach stable conditions rapidly in terms of gas production, nutrient content and cellulose and hemicellulose to lignin ratio (C+H/L). Two types of experiments were conducted; small batch and laboratory scale lysimeter experiments. Results from batch experiments showed that enzyme added treatments have the capability to reach a stable C+H/L and lower gas production rates, faster than the treatments without enzyme addition. Enzyme enhancement of the lysimeter increased the rate of biodegradability of the waste; gas production increased more than two times and there was clear evidence of increase in nutrients (nitrogen, dissolved carbon, biological oxygen demand) in the lysimeter ​leachate.

A comparative study of leachate quality and biogas generation in simulated anaerobic and hybrid bioreactors.

Research has been conducted to compare leachate characterization and biogas generation in simulated anaerobic and hybrid bioreactor landfills with typical Chinese municipal solid waste (MSW). Three laboratory-scale reactors, an anaerobic (A1) and two hybrid bioreactors (C1 and C2), were constructed and operated for about 10months. The hybrid bioreactors were operated in an aerobic-anaerobic mode with different aeration frequencies by providing air into the upper layer of waste. Results showed that the temporary aeration into the upper layer aided methane generation by shortening the initial acidogenic phase because of volatile fatty acids (VFAs) reduction and pH increase. Chemical oxygen demand (COD) decreased faster in the hybrid bioreactors, but the concentrations of ammonia-nitrogen in the hybrid bioreactors were greater than those in the anaerobic control. Methanogenic conditions were established within 75d and 60d in C1 and C2, respectively. However, high aeration frequency led to the consumption of organic matters by aerobic degradation and resulted in reducing accumulative methane volume. The temporary aeration enhanced waste settlement and the settlement increased with increasing the frequency of aeration. Methane production was inhibited in the anaerobic control; however, the total methane generations from hybrid bioreactors were 133.4L/kgvs and 113.2L/kgvs. As for MSW with high content of food waste, leachate recirculation right after aeration stopped was not recommended due to VFA inhibition for methanogens.

Carbon pools and flows during lab-scale degradation of old landfilled waste under different oxygen and water regimes.

Landfill aeration has been proven to accelerate the degradation of organic matter in landfills in comparison to anaerobic decomposition. The present study aims to evaluate pools of organic matter decomposing under aerobic and anaerobic conditions using landfill simulation reactors (LSR) filled with 40 year old waste from a former MSW landfill. The LSR were operated for 27 months, whereby the waste in one pair was kept under anaerobic conditions and the four other LSRs were aerated. Two of the aerated LSR were run with leachate recirculation and water addition and two without. The organic carbon in the solid waste was characterized at the beginning and at the end of the experiments and major carbon flows (e.g. TOC in leachate, gaseous CO2 and CH4) were monitored during operation. After the termination of the experiments, the waste from the anaerobic LSRs exhibited a long-term gas production potential of more than 20 NL kg(-1) dry waste, which corresponded to the mineralization of around 12% of the initial TOC (67 g kg(-1) dry waste). Compared to that, aeration led to threefold decrease in TOC (32-36% of the initial TOC were mineralized), without apparent differences in carbon discharge between the aerobic set ups with and without water addition. Based on the investigation of the carbon pools it could be demonstrated that a bit more than 10% of the initially present organic carbon was transformed into more recalcitrant forms, presumably due to the formation of humic substances. The source of anaerobic degradation could be identified mainly as cellulose which played a minor role during aerobic degradation in the experiment.

Evaluating the methane generation rate constant (k value) of low-organic waste at Danish landfills.

The methane (CH4) generation rate constant (k value, yr(-1)) is an essential parameter when using first-order decay (FOD) landfill gas (LFG) generation models to estimate CH4 generation from landfills. Four categories of waste (street cleansing, mixed bulky, shredder, and sludge waste) with a low-organic content, as well as temporarily stored combustible waste, were sampled from four Danish landfills. Anaerobic degradation experiments were set up in duplicate for all waste samples and incubated for 405 days, while the cumulative CH4 generation was continuously monitored. Applying FOD equations to the experimental results, half-life time values (t½, yr) and k values of various waste categories were determined. In general, similar waste categories obtained from different Danish landfills showed similar results. Sludge waste had the highest k values, which were in the range 0.156-0.189 yr(-1). The combustible and street cleansing waste showed k values of 0.023-0.027 yr(-1) and 0.073-0.083 yr(-1), respectively. The lowest k values were obtained for mixed bulky and shredder wastes ranging from 0.013 to 0.017 yr(-1). Most low-organic waste samples showed lower k values in comparison to the default numeric values in current FOD models (e.g., IPCC, LandGEM, and Afvalzorg). Compared with the k values reported in the literature, this research determined low-organic waste for the first time via reliable large-scale and long-term experiments. The degradation parameters provided in this study are valuable when using FOD LFG generation models to estimate CH4 generation from modern landfills that receive only low-organic waste.

Yarrowia lipolytica and pollutants: Interactions and applications.

Yarrowia lipolytica is a dimorphic, non-pathogenic, ascomycetous yeast species with distinctive physiological features and biochemical characteristics that are significant in environment-related matters. Strains naturally present in soils, sea water, sediments and waste waters have inherent abilities to degrade hydrocarbons such as alkanes (short and medium chain) and aromatic compounds (biphenyl and dibenzofuran). With the application of slow release fertilizers, design of immobilization techniques and development of microbial consortia, scale-up studies and in situ applications have been possible. In general, hydrocarbon uptake in this yeast is mediated by attachment to large droplets (via hydrophobic cell surfaces) or is aided by surfactants and emulsifiers. Subsequently, the internalized hydrocarbons are degraded by relevant enzymes innately present in the yeast. Some wild-type or recombinant strains also detoxify nitroaromatic (2,4,6-trinitrotoluene), halogenated (chlorinated and brominated hydrocarbons) and organophosphate (methyl parathion) compounds. The yeast can tolerate some metals and detoxify them via different biomolecules. The biomass (unmodified, in combination with sludge, magnetically-modified and in the biofilm form) has been employed in the biosorption of hexavalent chromium ions from aqueous solutions. Yeast cells have also been applied in protocols related to nanoparticle synthesis. The treatment of oily and solid wastes with this yeast reduces chemical oxygen demand or value-added products (single cell oil, single cell protein, surfactants, organic acids and polyalcohols) are obtained. On account of all these features, the microorganism has established a place for itself and is of considerable value in environment-related applications.

Food-related applications of Yarrowia lipolytica.

Yarrowia lipolytica is a non-pathogenic generally regarded as safe yeast. It displays unique physiological as well as biochemical properties that are relevant in food-related applications. Strains naturally associated with meat and dairy products contribute towards specific textures and flavours. On some occasions they cause food spoilage. They produce food-additives such as aroma compounds, organic acids, polyalcohols, emulsifiers and surfactants. The yeast biomass has been projected as single cell oil and single cell protein. Y. lipolytica degrades or upgrades different types of food wastes and in some cases, value-added products have also been obtained. The yeast is thus involved in the manufacture of food stuffs, making of food ingredients, generation of biomass that can be used as food or feed and in the effective treatment of food wastes. On account of all these features, this versatile yeast is of considerable significance in food-related applications.