Deep blue emitter with a combination of hybridized local and charge transfer excited state and aggregation-induced emission features for efficient non-doped OLED.

Herein, a deep blue emitter (PI-TPB-CN) with a synergistic effect of hybridized local and charge transfer excited state (HLCT) and aggregation-induced emission (AIE) properties is successfully designed and synthesized to improve the performance of deep blue organic light-emitting diodes (OLEDs). It is constructed using a 1,2,4,5-tetraphenylbenzene (TPB) as an π-conjugated AIE core being asymmetrically functionalized with a phenanthro[9,10-d]imidazole (PI) as a weak donor (D) and a benzonitrile (CN) as an acceptor (A), thereby formulating D-π-A type fluorophore. Its HCLT and AIE properties verified by theoretical calculations, solvatochromic effects, and transient photoluminescence decay experiments, bring about a strong blue emission (452 nm) with a high photoluminescence quantum yield of 74% in the thin film. PI-TPB-CN is successfully employed as a blue emitter in OLEDs. Non-doped OLED with the structure of ITO/HATCN (6 nm)/NPB (30 nm)/TCTA (10 nm)/PI-TPB-CN (30 nm)/TPBi (40 nm)/LiF (1 nm)/Al (100 nm) demonstrates excellent electroluminescence (EL) performance with blue emission (451 nm) and maximum external quantum efficiency (EQEmax) of 7.38%. The device with a thinner layer of PI-TPB-CN (20 nm) and TPBi (30 nm) exhibits a deeper blue emission (444 nm) with CIE coordinates of (0.16, 0.09), a low turn-on voltage of 3.0 V, and EQEmax of 6.45%.

Effect of Diurnal Light Conditions on Electroretinogram Responses to Red and Blue Flickering Light.

Bright light impacts the human circadian system such that exposure to bright light at night can suppress melatonin secretion, and exposure to bright light in the morning prevents light-induced melatonin suppression at night. The preventive effect of morning light may attenuate the prior history of light sensitivity of intrinsically photosensitive retinal ganglion cells (ipRGCs) that regulate the circadian system. In this study, we evaluated electroretinogram (ERG) responses to red and blue flickering lights following dim and bright daylight conditions. Eleven healthy females underwent ERG measurements during exposure to 33 Hz flickering red or blue light under dim and bright daytime conditions. We averaged ERG waves for 50 flickering light pulses of the trigger signal data. We obtained the amplitude of the signal-averaged ERG by calculating the difference between the waves' peaks and bottoms. Although there was no significant dim and bright light difference in the amplitude of ERG waves, the ERG amplitude to flickering blue light under the bright light condition was significantly lower than to flickering blue light under the dim light condition. In this study, blue light stimulated mainly ipRGCs and S-cones. Since S-cones may contribute minimally to the light-adapted 33 Hz flicker ERG results, our findings suggest that bright light during the daytime attenuates the sensitivity of human ipRGCs.

Anti-biofilm activity of 445 nm and 970 nm diode laser on mixed species colonies of- aggregatibacter actinomycetemcomitans and porphyromonas gingivalis cultured on titanium discs -an in vitro study.

To assess and compare the anti-microbial efficacy of 445 nm and 970 nm diode laser on mixed species biofilm of Aggregatibacter actinomycetemcomitans [A.a] and Porphyromonas gingivalis [P.g] cultured on machined pure titanium discs. A total of 65 machined pure titanium discs with no surface modifications with a 10-mm diameter and a 2-mm height were sterilized by autoclaving at 121 °C for 15 min and incubated with the commercially available bacterial strains ATCC(American Type Culture Collection- P.g 33277 and A.a 29522)mixture of Aggregatibacter actinomycetemcomitans(A.a) and Porphyromonas gingivalis(P.g).After a 2-week incubation period with the mixture of bacteria to develop a mixed species biofilm, the discs were divided into three groups: (1) no treatment (control), (2) 445 nm laser (test), (3) 970 nm laser (test). For each laser wavelength (445 and 970 nm), the discs were exposed to 1.0 W and 2.0 W in continuous wave mode for the times points of 15, 30, and 60 s. The antimicrobial efficacy was assessed by qPCR. A significant reduction in the levels of both species of bacteria was observed between control and the laser intervention groups. A higher efficacy for the 445 nm diode laser against Porphyromonas gingivalis and a similar efficacy against Aggregatibacter actinomycetemcomitans was observed as compared to the 970 nm group. 445 nm wavelength represents a potential and effective laser wavelength which can be used for the management of peri-implant infection. The present study findings also need to be further validated through clinical interventional trials.

EXPRESS: Estimation of the Global Equivalence Ratio of a Swirl Combustor from a Small Number of Absorption Spectra Using Machine Learning.

A new optical diagnostic method that predicts the global fuel-air equivalence ratio of a swirl combustor using absorption spectra from only three optical paths is proposed here. Under normal operation, the global equivalence ratio and total flow rate determine the temperature and concentration fields of the combustor, which subsequently determine the absorption spectra of any combustion species. Therefore, spectra, as the fingerprint for a produced combustion field, were employed to predict the global equivalence ratio, one of the key operational parameters, in this study. Specifically, absorption spectra of water vapor at wavenumbers around 7444.36, 7185.6, and 6805.6 cm-1 measured at three different downstream locations of the combustor were used to predict the global equivalence ratio. As it is difficult to find analytical relationships between the spectra and produced combustion fields, a predictive model was a data-driven acquisition. The absorption spectra as an input were first feature-extracted through stacked convolutional autoencoders (CAEs) and then a dense neural network (DNN) was used for regression prediction between the feature scores and the global equivalence ratio. The model could predict the equivalence ratio with an absolute error of ±0.025 with a probability of 96%, and a gradient-weighted regression activation mapping analysis revealed that the model leverages not only the peak intensities but also the variations in the shape of absorption lines for its predictions.

Dual polarization for efficient III-nitride-based deep ultraviolet micro-LEDs.

The deep ultraviolet (DUV) micro-light emitting diode (µLED) has serious electron leakage and low hole injection efficiency. Meanwhile, with the decrease in the size of the LED chip, the plasma-assisted dry etching process will cause damage to the side wall of the mesa, which will form a carrier leakage channel and produce non-radiative recombination. All of these will reduce the photoelectric performance of µLED. To this end, this study introduces polarized bulk charges into the hole supply layer (p-HSL) and the electron supply layer (n-ESL) respectively (dual-polarized structure) of the DUV µLED at an emission wavelength of 279 nm to enhance the binding of carriers and increase the injection efficiency of carriers. This is because the polarization-induced bulk charge can shield the polarized sheet charge on the interface and reduce the polarization electric field. The reduced polarization electric field in p-HSL can increase the effective barrier height of the conduction band in the p-type region and reduce the effective barrier height of the valence band. The decrease in the polarized electric field of n-HSL can reduce the thermal velocity of electrons, thereby enhancing the electron injection efficiency, reducing the Shockley-Read-Hall (SRH) recombination, and increasing the effective barrier height of the valence band. The study results indicate that the electron concentration and hole concentration of a µLED with dual polarization were increased by 77.93% and 93.6%, respectively. The optical power and maximum external quantum efficiency of µLED reached 31.04 W/cm2 and 2.91% respectively, and the efficiency droop is only 2.06% at 120 A/cm2. These results provide a new approach to solving the problem of insufficient carrier injection and SRH recombination in high-performance DUV µLEDs.

Unlocking the Potential of Organic-Inorganic Hybrid Manganese Halides for Advanced Optoelectronic Applications.

Organic-inorganic hybrid manganese(II) halides (OIMnHs) have garnered tremendous interest across a wide array of research fields owing to their outstanding optical properties, abundant structural diversity, low-cost solution processibility, and low toxicity, which make them extremely suitable for use as a new class of luminescent materials for various optoelectronic applications. Over the past years, a plethora of OIMnHs with different structural dimensionalities and multifunctionalities such as efficient photoluminescence (PL), radioluminescence, circularly polarized luminescence, and mechanoluminescence have been newly created by judicious screening of the organic cations and inorganic Mn(II) polyhedra. Specifically, through precise molecular and structural engineering, a series of OIMnHs with near-unity PL quantum yields, high anti-thermal quenching properties, and excellent stability in harsh conditions have been devised and explored for applications in light-emitting diodes (LEDs), X-ray scintillators, multimodal anti-counterfeiting, and fluorescent sensing. In this review, the latest advancements in the development of OIMnHs as efficient light-emitting materials are summarized, which covers from their fundamental physicochemical properties to advanced optoelectronic applications, with an emphasis on the structural and functionality design especially for LEDs and X-ray detection and imaging. Current challenges and future efforts to unlock the potentials of these promising materials are also envisioned.

Bacterial reduction and temperature increase of titanium dental implant models treated with a 445 nm diode laser: an in vitro study.

In this in vitro study, the use of a 445 nm diode laser was investigated for the decontamination of titanium dental implants. Different irradiation protocols and the effect of repetitive laser irradiation on temperature increase and decontamination efficacy were evaluated on titanium implant models. An automated setup was developed to realize a scanning procedure for a full surface irradiation to recapitulate a clinical treatment. Three irradiation parameter sets A (continuous wave, power 0.8 W, duty cycle (DC) 100%, and 5 s), B (pulsed mode, DC 50%, power 1.0 W, and 10 s), and C (pulsed mode, DC 10%, power 3.0 W, and 20 s) were used to treat the rods for up to ten consecutive scans. The resulting temperature increase was measured by a thermal imaging camera and the decontamination efficacy of the procedures was evaluated against Escherichia coli and Staphylococcus aureus, and correlated with the applied laser fluence. An implant's temperature increase of 10 °C was set as the limit accepted in literature to avoid thermal damage to the surrounding tissue in vivo. Repeated irradiation of the specimens resulted in a steady increase in temperature. Parameter sets A and B caused a temperature increase of 11.27 ± 0.81 °C and 9.90 ± 0.37 °C after five consecutive laser scans, respectively, while parameter set C resulted in a temperature increase of only 8.20 ± 0.53 °C after ten surface scans. The microbiological study showed that all irradiation parameter sets achieved a complete bacterial reduction (99.9999% or 6-log10) after ten consecutive scans, however only parameter set C did not exceed the temperature threshold. A 445 nm diode laser can be used to decontaminate dental titanium rods, and repeated laser irradiation of the contaminated areas increases the antimicrobial effect of the treatment; however, the correct choice of parameters is needed to provide adequate laser fluence while preventing an implant's temperature increase that could cause damage to the surrounding tissue.

The effect of laser therapy for the treatment of dentin hypersensitivity on surface roughness and bacterial adhesion.

The aim of the study was to measure the degree of dentine surface roughness caused by five distinct lasers used to treat dentine hypersensitivity, as well as to evaluate the subsequent bacterial colonization on these irradiated surfaces. Sixty human maxillary premolar teeth without caries or restoration which were extracted for periodontal reasons were used in this study. Five different types of lasers were applied to the root dentin surface. Tested samples were divided into six groups of 10 samples each; control, diode (810 nm), diode (980 nm), Nd: YAG, Er: YAG, and Er, Cr: YSGG laser groups. The arithmetic mean of the surface roughness values (Ra) and the average roughness over a measurement area (Sa) were measured pre- and post-application using any of the laser types. Swab samples were then collected from the dentin surface. Following a 24-hour incubation period at 37 °C, the colony forming units were counted using a stereoscope. The results demonstrated a statistically significant difference in the surface roughness values pre- and post-application (Ra and Sa, respectively) in the Er, Cr: YSGG laser group (p = 0.037,p = 0.007). No significant difference was observed in the other groups (p > 0.05). There was no statistically significant difference in the number of bacterial colonies observed between the test and control groups. Diode and Nd: YAG lasers showed either a decrease or no change in surface roughness; however, the hard tissue lasers (Er: YAG, Er, Cr: YSGG) showed an increase. The Er: YAG and Nd: YAG laser groups exhibited decreased bacterial adhesion compared to the other groups.

Josephson Diode Effect in Parallel-Coupled Double-Quantum Dots Connected to Unalike Majorana Nanowires.

We study theoretically the Josephson diode effect (JDE) when realized in a system composed of parallel-coupled double-quantum dots (DQDs) sandwiched between two semiconductor nanowires deposited on an s-wave superconductor surface. Due to the combined effects of proximity-induced superconductivity, strong Rashba spin-orbit interaction, and the Zeeman splitting inside the nanowires, a pair of Majorana bound states (MBSs) may possibly emerge at opposite ends of each nanowire. Different phase factors arising from the superconductor substrate can be generated in the coupling amplitudes between the DQDs and MBSs prepared at the left and right nanowires, and this will result in the Josephson current. We find that the critical Josephson currents in positive and negative directions are different from each other in amplitude within an oscillation period with respect to the magnetic flux penetrating through the system, a phenomenon known as the JDE. It arises from the quantum interference effect in this double-path device, and it can hardly occur in the system of one QD coupled to MBSs. Our results also show that the diode efficiency can reach up to 50%, but this depends on the overlap amplitude between the MBSs, as well as the energy levels of the DQDs adjustable by gate voltages. The present model is realizable within current nanofabrication technologies and may find practical use in the interdisciplinary field of Majorana and Josephson physics.

Hybrid Amino Acid Ligand-Regulated Excited Dynamics of Highly Luminescent Perovskite Quantum Dots for Bright White Light-Emitting Diodes.

Organic-inorganic hybrid perovskite quantum dots (QDs) have garnered significant research interest owing to their unique structure and optoelectronic properties. However, their poor optical performance in ambient air remains a significant limitation, hindering their advancement and practical applications. Herein, three amino acids (valine, threonine and cysteine) were chosen as surface ligands to successfully prepare highly luminescent CH3NH3PbBr3 (MAPbBr3) QDs. The morphology and XRD results suggest that the inclusion of the amino acid ligands enhances the octahedral structure of the QD solutions. Moreover, the observed blue-shifted phenomenon in the photoluminescence (PL) aligns closely with the blue-shifted phenomenon observed in the ultraviolet-visible (UV-Vis) absorption spectra, attributed to the quantum confinement effect. The time-resolved spectra indicated that the introduction of the amino acid ligands successfully suppressed non-radiative recombination, consequently extending the fluorescence lifetime of the MAPbBr3 QDs. The photoluminescence quantum yields (PLQYs) of the amino acid-treated MAPbBr3 QDs are increased by 94.8%. The color rendering index (CRI) of the produced white light-emitting diode (WLED) is 85.3, with a correlated color temperature (CCT) of 5453 K. Our study presents a novel approach to enhancing the performance of perovskite QDs by employing specially designed surface ligands for surface passivation.

Solution-Processed Thick Hole-Transport Layer for Reliable Quantum-Dot Light-Emitting Diodes Based on an Alternatingly Doped Structure.

The operating lifetime of quantum-dot light-emitting diodes (QLED) is a bottleneck for commercial display applications. To enhance the operational stability of QLEDs, we developed a robust solution-processed highly conductive hole-transport-layer (HTL) structure, which enables a thick HTL structure to mitigate the electric field. An alternating doping strategy, which involves multiple alternating stacks of N4,N4'-di(naphthalen-1-yl)-N4,N4'-bis(4-vinylphenyl)biphenyl-4,4'-diamine and phosphomolybdic acid layers, could provide significantly improved conductivity; more specifically, the 90 nm-thick alternatingly doped HTL exhibited higher conductivity than the 45 nm-thick undoped HTL. Therefore, when applied to a QLED, the increase in the thickness of the alternatingly doped HTL increased device reliability. As a result, the lifetime of the QLED with a thick, alternatingly doped HTL was 48-fold higher than that of the QLED with a thin undoped HTL. This alternating doping strategy provides a new paradigm for increasing the stability of solution-based optoelectronic devices in addition to QLEDs.

The efficacy of diode laser and subgingival air polishing with erythritol in treatment of periodontitis (clinical and microbiological study).

BACKGROUND: There is insufficient clinical and microbiological evidence to support the use of diode laser and air-polishing with erythritol as supplements to scaling and root planning(SRP). The aim of the current study is to evaluate the clinical and microbiologic efficacy of erythritol subgingival air polishing and diode laser in treatment of periodontitis. METHODS: The study encompassed twenty-four individuals seeking periodontal therapy and diagnosed with stage I and stage II periodontitis. Eight patients simply underwent SRP. Eight more patients had SRP followed by erythritol subgingival air polishing, and eight patients had SRP followed by diode laser application. At baseline and six weeks, clinical periodontal parameters were measured, including Plaque Index (PI), Gingival Index (GI), periodontal Probing Depth (PPD), and Clinical Attachment Level (CAL). The bacterial count of Aggregatibacter actinomycetemcomitans(A.A), Porphyromonas gingivalis (P.G) was evaluated at different points of time. RESULTS: The microbiological assessment revealed significant differences in the count of A.A. between the laser and erythritol groups immediately after treatment, indicating a potential impact on microbial levels. However, the microbial levels showed fluctuations over the subsequent weeks, without statistically significant differences. Plaque indices significantly decreased post-treatment in all groups, with no significant inter-group differences. Gingival indices decreased, and the laser group showed lower values than erythritol and control groups. PPD and CAL decreased significantly across all groups, with the laser group exhibiting the lowest values. CONCLUSION: The supplementary use of diode laser and erythritol air polishing, alongside SRP, represents an expedited periodontal treatment modality. This approach leads to a reduction in bacteria and improvement in periodontal health. TRIAL REGISTRATION: This clinical trial was registered on Clinical Trials.gov (Registration ID: NCT06209554) and released on 08/01/2024.

Phosphorescent PdII-PdII Emitter-Based Red OLEDs with an EQEmax of 20.52.

Three dinuclear Pd(II) complexes (1, 2, and 3) with intense red phosphorescence at room temperature are here synthesized using strong ligand field strength compounds. All three complexes are characterized by nuclear magnetic resonance, high-resolution mass spectrometry, and elemental analyses. Complexes 2 and 3 are characterized by single-crystal X-ray diffraction. The crystalline data of 2 and 3 reveal complex double-layer structures, with Pd-Pd distances of 2.8690(9) Å and 2.8584(17) Å, respectively. Furthermore, complexes 1, 2, and 3 show phosphorescence at room temperature in their solid states at the wavelengths of 678, 601, and 672 nm, respectively. In addition, they show phosphorescence at 634, 635, and 582 nm, respectively, in the 2 wt.% (PMMA) films, and phosphorescence at 670, 675, and 589 nm, respectively, in the deoxygenated CH2Cl2 solutions. Among three complexes, complex 1 shows red emission at 634 nm with phosphorescent quantum yield Ф = 67% in the 2 wt.% PMMA film. Furthermore, complex 1-based organic light-emitting diode is fabricated using a vapor-phase deposition process, and their maximum external quantum efficiency reaches 20.52%, which is the highest percentage obtained by using the dinuclear Pd(II) complex triplet emitters with the CIE coordinates of (0.62, 0.38).

A mechanistic study on the toluidine blue/ photodynamic therapy inhibition of lipopolysaccharide-induced inflammatory response in rat gingival fibroblasts.

The purpose of this research was to investigate the effect of toluidine blue (TB) mediated photodynamic therapy (PDT) on the inhibition of lipopolysaccharide (LPS)-induced inflammation in rat gingival fibroblasts through in vitro experiments. Rat gingival fibroblasts were divided into five groups: (1) control, (2) LPS treatment, (3) laser treatment, (4) TB treatment (1.0 µg/mL), and (5) PDT treatment (TB plus laser irradiation at 320 mW/cm2 for 240 s). After 24 h, cell growth activity was measured using MTT assay. The levels of receptor activator for nuclear factor-κB ligand (RANKL) and osteoprotegerin (OPG) in the cell culture supernatant were measured using enzyme-linked immunosorbent assay (ELISA). Nuclear proteins were extracted and the phosphorylation levels of phosphorylated nuclear factor-κB/p65 (p-p65) and phosphorylated inhibitor of nuclear factor-κB (p-IκBα) were determined using Western Blot. MTT results showed no significant difference in cell viability between the groups (P > 0.05). After LPS induction, OPG expression decreased, RANKL expression increased, and the OPG/RANKL ratio decreased, which was different from the control group (P < 0.05). After PDT treatment, OPG expression increased, RANKL expression decreased (P < 0.05), and the OPG/RANKL ratio increased (P < 0.05). Compared to the control group, there was no significant difference in OPG and RANKL expression or the OPG/RANKL ratio (P > 0.05). The activation of NF-κB was closely related to the phosphorylation levels of p-p65 and p-IκBα. LPS significantly up-regulated p-p65 and p-IκBα expression (P < 0.05), while PDT treatment decreased their phosphorylation levels (P < 0.05). TB-PDT treatment can inhibit NF-κB signaling pathway activation, decrease RANKL and OPG expression, and reduce the OPG/RANKL ratio, thereby reducing inflammation and playing a role in periodontitis treatment.

Clinical efficacy and pain control of diode laser-assisted flap surgery in the treatment of chronic periodontitis:A systematic review and meta-analysis.

Objective: To assess the diode laser-assisted periodontal flap surgery's clinical effectiveness and postoperative pain management in treating chronic periodontitis, and to offer evidence-based medical justification for the procedure's clinical use. Data sources and study selection: In this study, a computer combined with manual search was used to search for articles on diode laser-assisted periodontal flap surgery for the treatment of chronic periodontitis published from the establishment of the database to September 2023. The databases searched included China Academic Journal Full Text Database (CNKI), China Biomedical Literature Database (CBM), Chinese Science and Technology Journal Database (VIP), Wanfang Database, PubMed, Web of science, Cochrane Library, Embase, and Scopus. Two researchers independently performed the screening and study selection, following the inclusion and exclusion standards to extract basic information and required data. Meta-analysis of the included literature was performed using Revman V5.4 software. Result: Thirteen articles were analyzed. Meta-analysis showed that the use of the diode laser was effective in reducing patients' probing pocket depth (PPD) at 3 and 6 months postoperatively (3 months: MD = -0.46, 95 % CI = [-0.89, -0.03], P = 0.04; 6 months: MD = -0.35, 95 % CI = [-0.63, -0.06], P = 0.02), was able to effectively improve 3 month clinical attachment level (CAL) (MD = -0.36, 95 % CI = [-0.66, -0.06], P = 0.02), and was able to promote wound healing and reduce patients' early postoperative pain (MD = 0.67, 95 % CI = [0.01, 1.32], P = 0.05; MD = -1.67, 95 % CI = [-2.23, -1.00], and P < 0. 001), while for gingival index (GI), the use of diode laser did not have a significant effect. Conclusions: The available evidence suggests that the use of a diode laser adjunct is effective in reducing PPD, improving CAL, promoting wound healing, and reducing early postoperative pain in patients compared with flap application alone; however, for GI, diode lasers did not show any improvements. Clinical significance: Periodontal flap surgery fails to eliminate microorganisms from the soft tissue wall, potentially leading to recolonization, reinfection, and accompanying side effects such as pain and swelling. The use of a diode laser reduces PPD, improves CAL, and relieves early postoperative pain.

Using Laser Therapy and Topical Ozone as an Effective Intervention to Revolutionize Denture Stomatitis Treatment: A Case Report.

In dentistry, denture stomatitis (DS), a frequent inflammatory illness of the oral mucosa mostly related to denture wearing, is a major concern. DS is a common oral mycotic infection for those who wear partial or total dentures. The most often found species of Candida that may be isolated from both healthy and diseased oral tissues is Candida albicans. DS is associated with uneven denture surfaces, inadequate oral hygiene, or ill-fitting dentures. The diagnosis and management of DS in a 72-year-old male patient is presented in this case study. The patient complained about burning in his palate and having difficulty chewing. Upon clinical examination, erythema and inflammation were seen in the palate region. The history and clinical findings were consistent with DS. The patient was told to completely stop using dentures. Interventions were included in the treatment plan, such as diode laser therapy, topical ozonated oil application, and teaching about denture hygiene. The third day's follow-up visit revealed a progressive healing of the lesions and symptom relief. The lesion fully resolved on the sixth day. This case emphasizes the value of all-encompassing management techniques in treating DS successfully. It also highlights the significance of patient education, good oral hygiene, and focused therapy in producing favorable results.

Could Photobiomodulation help lactating women and their newborns?

During the first several weeks following lactation, nipple pain frequently prevents mothers from continuing breastfeeding. To evaluate the efficacy of using Photobiomodulation (PBM) versus anti-inflammatory topical cream, on inflamed nipple, and the effect on milk production. This study was carried-out on 50 breastfeeding women with nipple pain and fissure. Our patients were divided into two groups ; study group (Group I): 25 patients received 12 sessions of PBM using Diode laser for a period of 4 weeks, 3 sessions per week every alternative day, and controlled group (Group II): 25 patients used Anti-inflammatory topical cream. Regarding inflammatory signs in both groups, Group I showed a significant decrease in redness compared to Group II at the 3rd and 4th week, and a significant decrease in nipple fissure and pain at the 3rd week. There was a significant increase in milk amount reflected on the infant's weight. We concluded that PBM was more effective in decreasing nipple pain, inflammation and subsequently milk production and infant weight than topical anti-inflammatory creams.

Improving photovoltaic cell parameter calculations through a puffer fish inspired optimization technique.

The precise estimation of solar PV cell parameters has become increasingly important as solar energy deployment expands. Due to the intricate and nonlinear characteristics of solar PV cells, meta-heuristic algorithms show greater promise than traditional ones for parameter estimation. This study utilizes the Puffer Fish (PF) meta-heuristic optimization method, inspired by male puffer fish's circular structures, to estimate parameters of a modified four-diode PV cell. The PF algorithm's performance is assessed against ten benchmark test functions, with results presented as mean and standard deviation for validation. Comparative analysis with Particle Swarm Optimization (PSO), Grey Wolf Optimization (GWO), Rat Search Algorithm (RAT), Heap Based Optimizer (HBO), and Cuckoo Search (CS) algorithms highlights PF's superior performance, achieving optimal solutions with minimal error of 7.8947E-08. Statistical tests, including Friedman Ranking (1st) and Wilcoxon's rank sum (3.8108E-07), confirm PF's superiority. The circular structures of male puffer fish serve as an effective model for optimization algorithms, enhancing parameter estimation. Benchmark tests and statistical analysis consistently underscore PF's superiority over other meta-heuristic algorithms. Future research should explore PF's potential applications in solar energy and beyond.

An adaptable method for efficient modeling of photovoltaic generators' performance based on the double-diode model.

The aim of this study is to establish an effective modeling technique for simulating the performance of photovoltaic modules by calculating their electrical parameters based on the two-diode model. The suggested methodology involves reducing the scope of the study from seven unknown parameters to only three, and that without resorting to any approximations. The first four parameters are calculated analytically based on the data representing the crucial positions on the current-voltage graph and using a new expression of the fill-factor derived from the two-diode equivalent circuit. The remaining parameters are established numerically based on a simple iterative technique adaptable with two sites of data availability. The photovoltaic modeling begins by utilizing the values of key-points. Subsequently, to ensure the proposed approach's adaptability to various scenarios of available information about PV generators, it is invested and applied for an optimization process. The accuracy is evaluated for diverse types of photovoltaic modules, and the results are weighed against widely reviewed numerical methods and evolutionary optimization algorithms in the literature. As a result, the new method demonstrates superior performance, yielding the smallest values for the utilized statistical indicators and reducing compilation time. These findings underscore its flexibility and high efficiency in simulating photovoltaic devices.

Maxillary labial frenectomy: a randomized, controlled comparative study of two blue (445 nm) and infrared (980 nm) diode lasers versus surgical scalpel.

BACKGROUND: This study aimed to compare the intra and postoperative complications of frenectomy procedure with a surgical scalpel versus 445 nm and 980 nm diode lasers. METHODS: This randomized controlled clinical trial was conducted on 174 patients requiring maxillary labial frenectomy. After completion of fixed orthodontic treatment and primary closure of maxillary diastema, the patients were randomly assigned into three groups (n = 58): group 1 (frenectomy via 445 nm diode laser, continuous-wave, 1.5 W), group 2 (frenectomy via 980 nm laser, continuous-wave, 1.7 W), and control group (V-Y plasty technique via scalpel). Intra-operative bleeding, discomfort in chewing and speaking, pain, and tissue healing were compared among the groups immediately, at 7 and 30 days postoperatively using the Kruskal-Wallis, Mann-Whitney, and Chi-square tests. RESULTS: Pain scores were significantly lower in group 1 compared to group 2 (immediately and day 7, P < 0.05). Significant faster tissue healing at days 7 and 30 were observed in group 1 compared to group 2 (P < 0.05). Group 1 was superior to the control group regarding lower intraoperative bleeding, discomfort in chewing and speaking (immediately and day 7), lower pain (immediately and day 7), and tissue healing (day 7) (P < 0.05 for all). Group 2 was significantly superior to the control group in lower intraoperative bleeding, discomfort in chewing and speaking (immediately and day 7), and better tissue healing (day 7) (P < 0.05 for all). CONCLUSIONS: In conclusion, diode laser frenectomy resulted in significantly lower intra and postoperative complications compared to the scalpel. Moreover, 445 nm diode laser showed significantly superior effects compared to 980 nm diode laser. TRIAL REGISTRATION: The study protocol was registered on 29.10.2022 at the Iranian Registry of Clinical Trials ( www.irct.ir ) (registration number: IRCT20220630055326N1).