Experimental investigation of gamma-ray interaction parameters and buildup factors in lanthanide compounds: Insights into penetration depth.

This experimental investigation focuses on the gamma-ray interaction parameters and the buildup factor in lanthanide compounds (CeO2, Ce(SO4)2, Dy2(SO4)3, C3O9Sm2, C3Gd2O9, Pr2O3). These compounds were exposed to weak radioactive gamma sources with energies of 356, 511, 662, 1173, 1275, and 1332 keV by adopting narrow and broad beam geometry experimental arrangements. The incident and transmitted radiation intensities were measured using a NaI (Tl) detector. Experimentally measured values of mass attenuation coefficient and effective atomic number of lanthanide compounds were found to be in precise agreement with theoretical values obtained from NIST XCOM and Direct-Zeff database respectively. Additionally, the experimentally determined buildup factor values were compared with energy absorption buildup factor (EABF) and exposure buildup factor (EBF) values obtained from Phy-X/PSD software, providing insights into the gamma-ray penetration depth in terms of mean free path (MFP). At 356 keV, the EABF analysis showed that most compounds had a penetration depth of around 8 mean free paths. In contrast, the EBF analysis indicated penetration depths exceeding 10 mean free paths for all compounds except Ce (SO4)2. This new approach holds immense potential for transformative advancements in medical diagnostics, therapy, and the development of innovative technologies in nuclear sciences.

Highly efficient recovery of phosphate and fluoride from phosphogypsum leachate: Selective precipitation and adsorption.

Phosphogypsum, a typical by-product in the phosphorus chemical industry, could generate a large amount of leachate containing phosphate and fluoride in the process of rainfall and long-term stacking, which not only causes serious environmental pollution, but also leads to a waste of resources. In this study, a united treatment of calcium hydroxide precipitation and lanthanum zeolite (La-ZFA) adsorption was proposed to achieve the recovery of phosphate and fluoride from phosphogypsum leachate. In phosphogypsum, most phosphorus could be leached except P in the residual occurrence form, while for fluoride, only water-soluble F could be effectively leached. The optimum leaching amounts of phosphate and fluoride were 22.59 and 4.64 mg/g, respectively, at liquid-solid ratio of 400:1, leaching time of 120 min, pH of 6.0, particle size of >200 mesh (<0.075 mm), and leaching temperature of 25°C. Using Ca(OH)2 as the precipitant, the phosphate could be precipitated selectively from phosphogypsum leachate by controlling pH and time, and the concentrations of it decreased significantly to 0.29 mg/L at pH 10.0, with a removal efficiency of 99.48%. XRD, SEM and Visual MINTEQ software analysis proved that the main component of the precipitate was hydroxyapatite (Ca5(PO4)3(OH)). After P precipitation, a series of sorbents for fluoride were investigated, and La-ZFA sorbent was chosen and utilized to recover the fluoride from the leachate through a cyclic fixed-bed column. The efficiency of La-ZFA was basically not affected by the high concentration sulfate, and it can selectively adsorb fluoride from phosphogypsum leachate, leading to a final fluoride concentration of 0.29 mg/L in the effluent. The characterization demonstrated that fluoride might be adsorbed onto the La-ZFA via ligand exchange with hydroxy groups. The proposed method in this study is expected to sequentially recover phosphate and fluorine from the leachate of phosphogypsum, and it has great guiding significance for resource utilization and management of phosphogypsum.

Virus-Based Separation of Rare Earth Elements.

The utilization of biomaterials for the separation of rare earth elements (REEs) has attracted considerable interest due to their inherent advantages, including diverse molecular structures for selective binding and the use of eco-friendly materials for sustainable systems. We present a pioneering methodology for developing a safe virus to selectively bind REEs and facilitate their release through pH modulation. We engineered the major coat protein of M13 bacteriophage (phage) to incorporate a lanthanide-binding peptide. The engineered lanthanide-binding phage (LBPh), presenting ∼3300 copies of the peptide, serves as an effective biological template for REE separation. Our findings demonstrate the LBPh's preferential binding for heavy REEs over light REEs. Moreover, the LBPh exhibits remarkable robustness with excellent recyclability and stability across multiple cycles of separations. This study underscores the potential of genetically integrating virus templates with selective binding motifs for REE separation, offering a promising avenue for environmentally friendly and energy-efficient separation processes.

Lanthanide-Induced Ligand Effect to Regulate the Electronic Structure of Platinum-Lanthanide Nanoalloys for Efficient Methanol Oxidation.

The ligand effect in alloy catalysts is one of the decisive parameters of the catalytic performance. However, the strong interrelation between the ligand effect and the geometric effect of the active atom and its neighbors as well as the systematic alteration of the microenvironment of the active site makes the active mechanism unclear. Herein, Pt3Tm, Pt3Yb, and Pt3Lu with a cubic crystal system (Pm-3m) were selected. With the difference of Pt-Pt interatomic distance within 0.02 Å, we minimize the geometric effect to realize the disentanglement of the system. Through precise characterization, due to the low electronegativity of Ln (Ln = Tm, Yb, and Lu) and the ligand effect in the alloy, the electronic structure of Pt is continuously optimized, which improves the electrochemical methanol oxidation reaction (MOR) performance. The Ln electronegativity has a linear relationship with the MOR performance, and Pt3Yb/C achieves a high mass activity of up to 11.61 A mgPt-1, which is the highest value reported so far in Pt-based electrocatalysts. The results obtained in this study provide fundamental insights into the mechanism of ligand effects on the enhancement of electrochemical activity in rare-earth nanoalloys.

An Eu (III)-functionalized covalent organic framework fluorescent probe for specific detection of Flumequine based on pore restriction and antenna effect.

The overuse of quinolone antibiotics has led to a series of health and environmental issues. Herein, we combine the distinct luminescence properties of Eu3+ with the unique structure of covalent organic frameworks (COFs) to develop a precise and sensitive fluorescent probe for detecting Flumequine (Flu) in water. Eu3+ is thoroughly anchored into the channels of COFs as recognition sites, while the synthesized probe material still maintains its intact framework structure. The unique structure of COFs provides excellent support and protection for Eu3+. Therefore, COF-Eu can rapidly bind with Flu which can transfer the absorbed energy to Eu3+ through an "antenna effect", resulting in red fluorescence. Moreover, there is a good linear relationship between Flu concentration in the range of 0-30 µM, with a detection limit of 41 nM. Simultaneously, the material maintains remarkable reproducibility, with its performance remaining almost unchanged after five cycles of use. Remarkably, the probe demonstrates excellent Flu recovery rates in real samples. This study provides a viable approach for the recognition of flumequine in the environment through a customized fluorescence detection method.

Water-Stable Ln-MOF as a multi-emitting luminescent sensor for the detection of metal ions and pharmaceuticals.

The development of innovative multi-emission sensors for the rapid and accurate detection of contaminants is both vital and challenging. In this study, utilizing two rigid ligands (H3ICA and H4BTEC), a series of water-stable bimetallic organic frameworks (EuTb-MOFs) were synthesized. Luminescent investigations have revealed that EuTb-MOF-1 exhibits prominent multiple emission peaks, attributed to the distinctive fluorescence characteristics of Eu(III) and Tb(III) ions. Therefore, EuTb-MOF-1 efficiently recognized various metal ions and pharmaceutical compounds through 2D decoded maps. Fe3+ and Pb2+ exhibited significant quenching effects on the luminescence of EuTb-MOF-1, which were attributed to the internal filtering effect and the interaction between Lewis basic sites within EuTb-MOF-1 and Pb2+ ions, respectively. Furthermore, EuTb-MOF-1 demonstrated high sensitivity to sulfonamide antibiotics, with detection limits of 0.037 µM for SMZ and 0.041 µM for SDZ, respectively. In addition, EuTb-MOF-1 was immobilized to prepare MOF-based test strips, enabling direct visual detection of sulfonamides as a portable sensor. With excellent water stability, multi-responsive recognition capabilities, and high sensitivity to specific analytes, EuTb-MOF-1 is a promising candidate for environmental contaminant detection in aquatic systems.

Comprehensive Review of Synthesis, Optical Properties and Applications of Heteroarylphosphonates and Their Derivatives.

This review focuses on optical properties of compounds in which at least one phosphonate group is directly attached to a heteroaromatic ring. Additionally, the synthesis and other applications of these compounds are addressed in this work. The influence of the phosphonate substituent on the properties of the described compounds is discussed and compared with other non-phosphorus substituents, with particular attention given to photophysical properties, such as UV-Vis absorption and emission, fluorescence quantum yield and fluorescence lifetime. Considering the presence of heteroatom, the collected material was divided into two parts, and a review of the literature of the last thirty years on heteroaryl phosphonates containing sulfur and nitrogen atoms in the aromatic ring was conducted.

The crystal structure of a mononuclear PrIII complex with cucurbit[6]uril.

A new mononuclear complex, penta-aqua-(cucurbit[6]uril-κ2 O,O')(nitrato-κ2 O,O')praseodymium(III) dinitrate 9.56-hydrate, [Pr(NO3)(CB6)(H2O)5](NO3)2·9.56H2O (1), was obtained as outcome of the hydro-thermal reaction between the macrocyclic ligand cucurbit[6]uril (CB6, C36H36N24O12) with a tenfold excess of Pr(NO3)3·6H2O. Complex 1 crystallizes in the P21/n space group with two crystallographically independent but chemically identical [Pr(CB6)(NO3)(H2O)5]2+ complex cations, four nitrate counter-anions and 19.12 inter-stitial water mol-ecules per asymmetric unit. The nona-coordinated PrIII in 1 are located in the PrO9 coordination environment formed by two carbonyl O atoms from bidentate cucurbit[6]uril units, two oxygen atoms from the bidentate nitrate anion and five water mol-ecules. Considering the differences in Pr-O bond distances and O-Pr-O angles in the coordination spheres, the coordination polyhedrons of the two PrIII atoms can be described as distorted spherical capped square anti-prismatic and muffin polyhedral.

Organolanthanide Single-Molecule Magnets with Heterocyclic Ligands.

Lanthanide (Ln) based mononuclear single-molecule magnets (SMMs) provide probably the finest ligand regulation model for magnetic property. Recently, the development of such SMMs has witnessed a fast transition from coordination to organometallic complexes because the latter provides a fertile, yet not fully excavated soil for the development of SMMs. Especially those SMMs with heterocyclic ligands have shown the potential to reach higher blocking temperature. In this minireview, we give an overview of the design principle of SMMs and highlight those "shining stars" of heterocyclic organolanthanide SMMs based on the ring sizes of ligands, analysing how the electronic structures of those ligands and the stiffness of subsequently formed molecules affect the dynamic magnetism of SMMs. Finally, we envisaged the future development of heterocyclic Ln-SMMs.

Lanthanide-Based Molecular Magnetic Semiconductors.

Magnetic semiconductors, with integrated properties of ferromagnets and semiconductors, are significant for developing next-generation spintronic devices. Herein two atomically precise clusters of dysprosium(III) tellurides, formulated respectively as [Na2(15-crown-5)3(py)][(η5-Cp*Dy)5(Te)6](py)4 (Dy5Te6, Cp* = pentamethylcyclopentadienyl; py = pyridine) and [K(2,2,2-cryptand)]2[(η5-Cp*Dy)6(Te3)(Te2)2(Te)3] (Dy6Te10), are reported. Crystallographic studies revealed the presence of multifarious tellurido ligands within the polyhedral cluster cores. Spectroscopic and magnetic studies showed that both clusters are single-molecule magnets exhibiting slow magnetic relaxation behaviors at low temperatures and semiconductors with optical bandgaps comparable to benchmark semiconductors. These clusters represent probably the first lanthanide-based molecular magnetic semiconductors.

Upconversion Luminescence in a Photostable Ion-Paired Yb-Eu Heteronuclear Complex.

Lanthanide-based upconversion molecular complexes have potential application in diverse fields and attracted considerable research interest in recent years. However, the similar coordination reactivity of lanthanide ions has constrained the designability of target molecule with well-defined structure, and many attempts obtained statistical mixtures. Herein, an ion-paired Yb-Eu heteronuclear complex [Eu(TpPy)2][Yb(ND)4] (TpPy = tris[3-(2-pyridyl)pyrazolyl]hydroborate, ND = 3-cyano-2-methyl-1,5-naphthyridin-4-olate) was designed and synthesized. Thanks to the radius difference between Eu3+ (1.07 Å) and Yb3+ (0.98 Å) ions, the hexadentate TpPy ligand was selected to coordinate with Eu3+ and the Yb3+ with a smaller radius was chelated by bidentate ND ligand. As a result, the sites of Eu3+ and Yb3+ in the complex can be clarified by high-resolution mass spectrometry and single-crystal structure analysis. Upon the excitation of Yb3+ at 980 nm, the upconversion emission of Eu3+ was realized through a cooperative sensitization process. Furthermore, [Eu(TpPy)2][Yb(ND)4] demonstrated excellent photostability during continuous high-power density 980 nm laser irradiation, with a LT95 (the time to 95% of the initial emission intensity) of 420 minutes. This work provides the first example of a pure ion-paired Yb-Eu heteronuclear complex upconversion system and may bring insights into rational design of lanthanide-based upconversion molecular complexes.

Supramolecular assemblies derived from methyl-substituted cucurbit[5]uril and lanthanide nitrates.

Interaction of the lanthanide nitrates M(NO3)3 (M = Gd, Eu) with methylcucurbit[5]uril (Me10Q[5]) in the presence of transition metal chlorides (ZnCl2 and FeCl3) in acidic media resulted in the isolation of the complexes [Me10Q[5]Gd(H2O)2Cl Gd(H2O)6](ZnCl4)2∙Cl∙8.9H2O (1) and [Me10Q[5]Eu(H2O)3Cl(H3O)](FeCl4)3 (2). The molecular structures of 1 and 2 have been determined by single crystal X-ray crystallography, and reveal discrete complexes which are involved in dense stacking with adjacent Me10Q[5]s linked via H-bonding and/or metal anions resulting in a supramolecular assembly.

Effect of Lanthanide Ions and Triazole Ligands on the Molecular Properties, Spectroscopy and Pharmacological Activity.

The effect of La, Ce, Pr and Nd ions on four Ln(ligand)3 complexes and at three DFT levels of calculation was analyzed. Four ligands were chosen, three of which were based on the 1,2,3-triazole ring. The DFT methods used were B3LYP, CAM-B3LYP and M06-2X. The relationships established were between the geometric parameters, atomic charges, HOMO-LUMO energies and other molecular properties. These comparisons and trends will facilitate the synthesis of new complexes by selecting the ligand and lanthanide ion best suited to the desired property of the complex. The experimental IR and Raman spectra of Ln(2b')3 complexes where Ln = La, Ce, Pr, Nd, Sm, Gd, Dy, Ho and Er ions have been recorded and compared to know the effect of the lanthanide ion on the complex. The hydration in these complexes was also analyzed. Additionally, the effect of the type of coordination center on the ability of an Ln(ligand)3 complex to participate in electron exchange and hydrogen transfer was investigated using two in vitro model systems-DPPH and ABTS.

Antenna-based optimization of triplet radioluminescence of Tb-organic complex scintillator for efficient X-ray detection.

Triplet exciton is both a luminescence quenching factor and an important luminescence sensitization technology solution, which is widely concerned in the field of optoelectronic materials. Since X-ray excited triplet excitons are dissipated through various pathways, there are still huge difficulties in achieving efficient triplet sensitized emission. Here, the antenna ligand is regulated through the carboxyl group, increasing the steric hindrance between the conjugated groups and improving triplet-enhanced radioluminescence (RL) efficiencies of Tb3+. The lanthanide metal-organic frameworks (Ln-MOFs) formed by the coordination of Tb3+ with mellitic acid (MA), pyromellitic acid (PMA) and trimesic acid (TMA) under low temperature preparation conditions. Among them, MA-Tb has a longer spacing between conjugated groups than PMA-Tb and TMA-Tb, and its triplet RL is relatively strongest, with a light yield of 28,000 photons MeV-1. Mechanistic studies revealed that the RL efficiency of Ln-MOFs is related to the π-π stacking effect in the benzene ring. In addition, the application of MA-Tb in the field of X-ray detection was demonstrated. The RL intensity of MA-Tb has a good linear relationship with the X-ray dose rate, and the detection limit for X-ray reaches 82 nGy/s, which is 66 times lower than the typical medical imaging dose. These results will provide a universal strategy for the design of Ln-MOFs scintillator.

Portable Near-Infrared to Near-Infrared Platform for Homogeneous Quantification of Biomarkers in Complex Biological Samples.

Förster resonance energy transfer (FRET)-based homogeneous immunoassay obviates tedious washing steps and thus is a promising approach for immunoassays. However, a conventional FRET-based homogeneous immunoassay operating in the visible region is not able to overcome the interference of complex biological samples, thus resulting in insufficient detection sensitivity and poor accuracy. Here, we develop a near-infrared (NIR)-to-NIR FRET platform (Ex = 808 nm, Em = 980 nm) that enables background-free high-throughput homogeneous quantification of various biomarkers in complex biological samples. This NIR-to-NIR FRET platform is portable and easy to operate and is mainly composed of a high-performance NIR-to-NIR FRET pair based on lanthanide-doped nanoparticles (LnNPs) and a custom-made microplate reader for readout of NIR luminescence signals. We demonstrate that this NIR-to-NIR FRET platform is versatile and robust, capable of realizing highly sensitive and accurate detection of various critical biomarkers, including small molecules (morphine and 1,25-dihydroxyvitamin D), proteins (human chorionic gonadotropin), and viral particles (adenovirus) in unprocessed complex biological samples (urine, whole blood, and feces) within 5-10 min. We expect this NIR-to-NIR FRET platform to provide low-cost healthcare for populations living in resource-limited areas and be widely used in many other fields, such as food safety and environmental monitoring.

Cerium- and samarium-nitrate interaction and accumulation on human dentin.

OBJECTIVE: To investigate the accumulation of cerium-nitrate and samarium-nitrate on dentin without or with smear-layer and to test their antibacterial activity. DESIGN: 24 dentin-enamel slices were cut from 24 extracted molars. 12 slices underwent smear-layer creation (320 grit, 200 g, 5 s), the other 12 smear-layer removal (20 % EDTA, 300 s). Slices were halved to 48 semilunar-shaped specimens. One specimen per tooth was treated with either Ce(NO3)3 (50 wt% aqueous solution; pH = 1.29; n = 6) or Sm(NO3)3 (50 wt% aqueous solution; pH = 1.88; n = 6). The other specimen served as control (A. demin). After water rinsing, elemental composition (Ce, Sm, Ca, P, O, N, Na, Mg, C) was measured (EDX; EDAX Octane-Elect, APEX v2.5, low-vacuum) in dentin. Atomic percent (At%), Ca/P- and Ca/N-ratios were calculated and analyzed non-parametrically (α = 0.05, error rates method). Additionally, antibacterial activity (2 min exposure) of Ce(NO3)3 and Sm(NO3)3 against Streptococcus mutans, Actinomyces naeslundii, Schaalia odontolytica, and Enterococcus faecalis was determined (colony forming units) after anaerobic incubation at 37 °C for 24 h (control: 0.2 % CHX). RESULTS: At% (median) of Ce and Sm were as follows: Ce(NO3)3 3.4 and 0.9 At%Ce with and without smear-layer, respectively; Sm(NO3)3 2.4 and 1.3 At%Sm with and without smear-layer, respectively. Ce(NO3)3 and Sm(NO3)3-application significantly decreased Ca/P-ratios (1.22 - 1.45; p ≤ 0.02) compared to controls (1.47 - 1.63). With smear-layer, significantly higher Ca/N-ratios (5.1 - 29.3) could be detected across all groups (p ≤ 0.004) compared to specimens without smear-layer (0.37 - 0.48). Ce(NO3)3 and Sm(NO3)3 showed reduction rates of up to ≥ 5 log10 steps for S. mutans, A. naeslundii, and S. odontolytica. CONCLUSIONS: Cerium and samarium nitrate showed accumulation on dentin and certain antibacterial activity and could therefore be identified as potential compounds to treat and prevent dentin and root caries and dentin hypersensitivity.

A Four-Coordinate Pr4+ Imidophosphorane Complex.

The imidophosphorane ligand, [NPtBu3]- (tBu = tert-butyl), enables isolation of a pseudo-tetrahedral, tetravalent praseodymium complex, [Pr4+(NPtBu3)4] (1-Pr), which is characterized by a suite of physical characterization methods including single-crystal X-ray diffraction, electron paramagnetic resonance, and L3-edge X-ray near-edge spectroscopies. Variable-temperature direct-current magnetic susceptibility data, supported by multiconfigurational quantum chemical calculations, demonstrate that the electronic structure diverges from the isoelectronic Ce3+ analogue, driven by increased crystal field. The four-coordinate environment around Pr4+ in 1-Pr, which is unparalleled in reported extended solid systems, provides a unique opportunity to study the interplay between crystal field splitting and spin-orbit coupling in a molecular tetravalent lanthanide within a pseudo-tetrahedral coordination geometry.

Spatially Resolved Multicolor Luminescence Tuning on the Single 1D Heterogeneous Microrod.

The spatially resolvable multicolored microrods have potential applications in many fields. However, achieving spatially resolved multicolor luminescence tuning on the microrod with a fixed composition remains a daunting challenge. Herein, a strategy is proposed that allows for the tuning of spatially resolved, multicolored upconversion (UC) luminescence (UCL) along a 1D heterogeneous microrod by modifying the pulse width of an external laser. NaYbF4:1 % Ho is identified as an UCL color-adjustable material, exhibiting pulse width-dependent multicolored UCL, resulting in a significant regulation of the red/green (R/G) ratio from 0.1 to 10.3 as the pulse width is varied from 0.1 to 10 ms. Such variability can be ascribed to differences in the number of photons incident upon the microrod throughout the period necessary for the UC process to occur. Additionally, NaYbF4:1 %Tm and NaYF4:20 %Yb,1 %Ho are employed as materials that emit blue and green light, respectively, with their UCL colors largely unaffected by changes in the pulse width. Subsequently, a tip-modified epitaxial growth method is utilized to integrate both UCL color-adjustable and non-adjustable segments within the same microrod. Comparing with single-color or fixed multicolor microrods, our developed multisegmented emissive color adjustable 1D heterogeneous microrods have unique optical characteristics and can carry more optical information.

Lanthanide metal-organic frameworks as ratiometric fluorescent probes for real-time monitoring of PFOA photocatalytic degradation process.

The assessment of perfluorooctanoic acid (PFOA) photocatalytic degradation usually involves tedious pre-treatment and sophisticated instrumentation, making it impractical to evaluate the degradation process in real-time. Herein, we synthesized a series of lanthanide metal-organic frameworks (Ln-MOFs) with outstanding fluorescent sensing properties and applied them as luminescent probes in the photocatalytic degradation reaction of PFOA for real-time evaluation. As the catalytic reaction proceeds, the fluorescence color changes significantly from green to orange-red due to the different interaction mechanisms between the electron-deficient PFOA and smaller radius F- with the ratiometric fluorescent probe MOF-76 (Tb: Eu = 29:1). The limit of detection (LOD) was calculated to be 0.0127 mM for PFOA and 0.00746 mM for F-. In addition, the conversion rate of the catalytic reaction can be read directly based on the chromaticity value by establishing a three-dimensional relationship graph of G/R value-conversion rate-time (G/R indicates the ratio between green and red luminance values in the image.), allowing for real-time and rapid tracking of the PFOA degradation. The recoveries of PFOA and F- in the actual water samples were 99.3-102.7% (RSD = 2.2-4.4%) and 100.7-105.3% (RSD = 3.9-6.8%), respectively. Both theoretical calculations and experiments reveal that the detection mechanism was attributed to the photoinduced electron transfer and energy transfer between the analytes and the probe. This method simplifies the sample analysis process and avoids the use of bulky instruments, and thus has great potential on the design and development of quantitative time-resolved visualization methods to assess catalytic performance and reveal mechanisms.

Leap-Type Response of Redox/Photo-Active Lanthanide-Based Metal-Organic Frameworks for Early and Accurate Screening of Prostate Cancer.

The development of high-accuracy technologies to distinguish the quite tiny concentration change of tumor markers between negative and positive is of vital significance for early screening and diagnosis of cancers, but is still a great challenge for the conventional biosensors because of their "gradual" detection mode. Herein, a unique "leap-type" responsive lanthanide MOF-based biosensor (designated as Tb-CeMOF-X) with defect-mediated redox-/photo-activities is developed for precisely identifying acid phosphatase (ACP), an early pathological marker of prostate cancer (PCa) in serum. The engineered Tb-CeMOF-X probe achieves a bursting switch-on luminescence at the critical concentration of ACP (9 U·L-1), while keeping silent below this threshold, undergoing a qualitative signal change from "zero" to "one" between negative and positive indicators and thus significantly improving the identification precision. Significantly, such "leap-type" response performance can be further edited and amplified by rational defect engineering in the crystal structure to improve the accessibility of active centers, consequently maximizing the detection sensitivity toward ACP in the complex biological media. This study proposes the first paradigm for the development of "leap-type" biosensors with ultra-sensitive differentiation capability between negative and positive, and provides a potentially valuable tool for early and accurate screening of PCa.