Dissolved carbon in biochar: Exploring its chemistry, iron complexing capability, toxicity in natural redox environment.

Dissolved black carbon (DBC) plays a crucial role in the migration and bioavailability of iron in water. However, the properties of DBC releasing under diverse pyrolysis conditions and dissolving processes have not been systematically studied. Here, the compositions of DBC released from biochar through redox processes dominated by bacteria and light were thoroughly studied. It was found that the DBC released from straw biochar possess more oxygen-containing functional groups and aromatic substances. The content of phenolic and carboxylic groups in DBC was increased under influence of microorganisms and light, respectively. The concentration of phenolic hydroxyl groups increased from 10.0∼57.5 mmol/gC to 6.6 ∼65.2 mmol/gC, and the concentration of carboxyl groups increased from 49.7∼97.5 mmol/gC to 62.1 ∼113.3 mmol/gC. Then the impacts of DBC on pyrite dissolution and microalgae growth were also investigated. The complexing Fe3+ was proved to play a predominant role in the dissolution of ferrous mineral in DBC solution. Due to complexing between iron ion and DBC, the amount of dissolved Fe in aquatic water may rise as a result of elevated number of aromatic components with oxygen containing groups and low molecular weight generated under light conditions. Fe-DBC complexations in solution significantly promoted microalga growth, which might be attributed to the stimulating effect of dissolved Fe on the chlorophyll synthesis. The results of study will deepen our understanding of the behavior and ultimate destiny of DBC released into an iron-rich environment under redox conditions.

A case of intra-abdominal gossypiboma diagnosed preoperatively by endoscopic ultrasound fine-needle-aspiration.

Gossypiboma is an extremely rare adverse event occurring post-surgery, where surgical gauze is left within the body. If aseptically retained, it can lead to the formation of granulation tissue through chronic inflammation and adhesion with surrounding tissues, potentially persisting asymptomatically for many years. While diagnosis of this condition has been reported through various imaging modalities such as abdominal ultrasound and computed tomography, cases not presenting with typical findings are difficult for preoperative diagnosis, and instances where it is discovered postoperatively exist. Particularly when in contact with the gastrointestinal tract within the abdominal cavity, differentiation from submucosal tumors of the digestive tract becomes problematic. This report describes the imaging characteristics of endoscopic ultrasound and the usefulness of endoscopic ultrasound-fine-needle-aspiration for tissue diagnosis in the preoperative diagnosis of intra-abdominal gossypiboma.

2-Aminoacetophenone formation through UV-C induced degradation of tryptophan in the presence of riboflavin in model wine: Role of oxygen and transition metals.

2-Aminoacetophenone is an off-flavor that can result from tryptophan degradation via riboflavin-photosensitized reaction. This study investigates the impact of light exposure, provided by a UV-C source, oxygen concentrations and transition metals on the formation of 2-aminoacetophenone in model wine containing tryptophan and riboflavin. Irrespective of oxygen and transition metals, >85% of tryptophan were degraded via first-order kinetics to unknown product(s). However, longer light exposure and more oxygen caused 2-aminoacetophenone concentrations to increase. Transition metals decelerated the 2-aminoacetophenone formation and acetaldehyde was formed suggesting photo-Fenton reaction occurred as a competitive reaction. The degradation rate of riboflavin inclined with less oxygen and in the presence of transition metals due to the depletion of oxygen by photo-Fenton reaction. Oxygen plays an important role in the regeneration of riboflavin and therefore must be seen as an intensifier for light-induced 2-aminoacetophenone formation. This paper provides new insights into riboflavin-photosensitized reactions.

Practical Advice on Measuring and Applying Light for Laboratory Mammals.

Light is recognized as an important component of the environment for laboratory animals. It supports vision, sets the phase of circadian clocks, and drives wide-ranging adjustments in physiological and behavioral state. Manipulating light is meanwhile a key experimental approach in the fields of vision science and chronobiology. Nevertheless, until recently, there has been no consensus on methods for quantifying light as experienced by laboratory animals. Widely adopted practices employ metrics such as illuminance (units = lux) that are designed to quantify light as experienced by human observers. These weight energy across the spectrum according to a spectral sensitivity profile for human vision that is not widely replicated for non-human species. Recently, a Consensus View was published that proposes methods of light measurement and standardization that take account of these species-specific differences in wavelength sensitivity. Here, we draw upon the contents of that consensus to provide simplified advice on light measurement in laboratory mammal experimentation and husbandry and quantitative guidance on what constitutes appropriate lighting for both visual and circadian function.

[Experimental teaching reform of polymer molar mass determination using gel permeation chromatography coupled with light scattering].

Gel permeation chromatography coupled with light scattering (GPC-LS) is among the most common methods for determining the molar masses of polymers. GPC-LS is widely used in polymer science research and has been adopted for many industrial applications owing to its high sensitivity, accuracy, and precision. The determination of polymer molar masses using GPC-LS is an important experimental component of the "Polymer Physics Experiments" course. However, the present GPC-LS experimental teaching content tends to be overly simplistic and lacking in depth. Herein, the original experimental content is expanded and multiple sets of experiments are redesigned: (1) Using commercial polystyrene as an experimental sample, the molar mass, molar mass distribution, radius of gyration, and other molecular structure parameters are determined using GPC-LS; (2) Using two polyacrylonitriles with similar molecular structure parameters, subtle differences in the molar mass distributions of the samples are explored using differential mass distribution curves; (3) By comparing the chromatograms of a series of polyethylene glycols with different molar masses, the effect of molar mass on chromatographic peaks is investigated; and (4) For three different polymers (polyacrylonitrile, poly(methyl methacrylate), and poly(ß-cyclodextrin)), the polymer chain conformations are analyzed using conformation plots (i.e., radius of gyration vs. molar mass). In addition, the experimental teaching method is modified to convert passive learning into active learning, thereby improving the students' self-directed learning ability. This experimental teaching reform will help students obtain a more comprehensive understanding of GPC-LS principles and applications, stimulate their enthusiasm for learning, and improve the teaching quality of the experimental course.

[Simultaneous determination of 10 quaternary ammonium salt bactericides in oral care products by high performance liquid chromatography-evaporative light-scattering detection].

Quaternary ammonium salt bactericides are broad-spectrum bactericides often used in oral care products because of their high antibacterial efficacy, strong penetration, and low toxicity. However, the excessive use of quaternary ammonium salt bactericides may cause contact dermatitis, scalding poisoning, and even death. Existing methods to determine quaternary ammonium salt bactericides are unable to meet current requirements owing to the lack of determination components. Therefore, establishing a simple and accurate method for the simultaneous detection of more quaternary ammonium salt bactericides is necessary. In this study, a method that couples sample pretreatment with high performance liquid chromatography-evaporative light-scattering detection (HPLC-ELSD) was developed for the simultaneous determination of quaternary ammonium salt bactericides in oral care products, including dodecyltrimethylammonium chloride, dodecyldimethylbenzylammonium chloride, benzethonium chloride, tetradecyl trimethyl ammonium chloride, tetradecyldimethylbenzylammonium chloride, N-hexadecyltrimethylammonium chloride, benzyldimethylhexadecylammonium chloride, trimethylstearylammonium chloride, stearyldimethylbenzylammonium chloride, and docosyltrimethylammonium chloride. Some of these bactericides do not absorb ultraviolet light, so a universal evaporative light-scattering detector was used owing to testing cost and stability concerns. The paste samples contained thickening agents, which are highly soluble in water but insoluble in organic solvents; these agents can seriously affect the results of sample pretreatment and damage the chromatographic column. Hence, sample dehydration was necessary. In this study, four dehydration methods were compared. Anhydrous sodium sulfate (Na2SO4) was selected, and the amount of Na2SO4 was optimized. Based on the solubility of the 10 target compounds and extraction efficiency, three extraction solvents were compared, and ethanol was selected. Ultrasonic extraction was the primary extraction process used in this study. The effects of different ultrasonication times, temperatures, and powers on the extraction recoveries were also investigated. Ultimately, the optimized conditions were as follows: extraction of the dehydrated paste and powder samples using ethanol at room temperature (25 ℃) for 20 min under 100 W ultrasound power, and dilution of the liquid sample with ethanol. After extraction, the samples were separated on an Acclaim Surfactant column (150 mm×4.6 mm, 5 µm) with 50 mmol/L ammonium acetate aqueous solution (pH=5.5) (A) and acetonitrile (B) as mobile phases. The gradient elution program were as follows: 0-5.0 min, 75%A-35%A, 5.0-15.0 min, 35%A-20%A, 15.0-20.0 min, 20%A, 20.0-21.0 min, 20%A-75%A, 21.0-25.0 min, 75%A. An external standard method was used for quantitative determination. The 10 compounds were analyzed within 25 min. Linear equations, correlation coefficients, and linear ranges were obtained by analyzing a series of mixed standard working solutions. The limits of detection (LODs, S/N=3) and quantification (LOQs, S/N=10) of the 10 components were determined. Stearyldimethylbenzylammonium chloride and docosyltrimethylammonium chloride showed good linear relationships in the range of 10-200 mg/L, while the other compounds demonstrated good linear relationships in the range of 5-100 mg/L. In all cases, correlation coefficients (R2) of no less than 0.9992 were obtained. The LODs and LOQs were in the range of 1.42-3.31 mg/L and 4.25-9.94 mg/L, respectively. Ten analytes were spiked in blank matrices, such as toothpaste (paste), mouthwash (liquid), and dentifrice powder (powder) at three levels, and the recoveries and precisions were calculated. The average recoveries were 87.9%-103.1%, and the corresponding relative standard deviations (RSDs) did not exceed 5.5% (n=6). The developed method was used to detect 109 oral care products. Benzyldimethylhexadecylammonium chloride and stearyldimethylbenzylammonium chloride revealed high detection rates. Moreover, the amount of stearyldimethylbenzylammonium chloride in one toothpaste sample exceeded regulatory requirements. Given its advantages of good precision and accuracy, the developed method is suitable for the quantitative analysis of the 10 aforementioned compounds in typical oral care products. The study findings can serve as a reference for the quality and safety monitoring of oral care products.

Green light exposure in children with autism spectrum disorder: a pilot study.

Children with autism spectrum disorder (ASD) are frequently afflicted with sensory processing difficulties, which often impact their ability to cooperate with dental treatment. The objective of this pilot study was to determine the effects of green light exposure on behavior, pain, distress and anxiety in pediatric patients with ASD undergoing a dental prophylaxis. Twelve children diagnosed with ASD, aged 6-17 years, requiring a dental prophylaxis participated in this study. Participants completed two dental prophylaxes, three months apart, one in a standard white light-exposed dental operatory and one in a green light-exposed dental operatory. Behavioral cooperation, pain intensity, physiological stress and anxiety were assessed in all patients. The Wilcoxon matched-pairs signed rank test was used to estimate differences in measured outcomes according to the experimental condition. There was a trend towards reduced uncooperative behavior when children received a dental prophylaxis in the green light-exposed operatory (p = 0.06). Similar levels of heart rate variability (p = 0.41), salivary alpha amylase (p = 0.19), and salivary cortisol (p = 0.67) were observed at the start and end of each visit in both conditions. Green light exposure had no significant effect on pain intensity (p = 0.17) or behavioral anxiety (p = 0.31). These findings suggest a preliminary positive benefit of green light exposure on behavioral outcomes in pediatric patients with ASD and warrants a further, large-scale clinical trial.

Organic Crystals and Optical Functions in Biology: Knowns and Unknowns.

Organic crystals are widely used by animals to manipulate light for producing structural colors and for improving vision. To date only seven crystal types are known to be used, and among them ß-guanine crystals are by far the most widespread. The fact that almost all these crystals have unusually high refractive indices (RIs) is consistent with their light manipulation function. Here, the physical, structural, and optical principles of how light interacts with the polarizable free-electron-rich environment of these quasiaromatic molecules are addressed. How the organization of these molecules into crystalline arrays introduces optical anisotropy and finally how organisms control crystal morphology and superstructural organization to optimize functions in light reflection and scattering are also discussed. Many open questions remain in this fascinating field, some of which arise out of this in-depth analysis of the interaction of light with crystal arrays. More types of organic crystals will probably be discovered, as well as other organisms that use these crystals to manipulate light. The insights gained from biological systems can also be harnessed for improving synthetic light-manipulating materials.

N-Halosuccinimide-CeCl3 Transient Charge-Transfer Complexes as Semi Heterogeneous Photocatalyst in Cyclization of N-Propargylamides.

In this work, we used photoinert anhydrous cerium(III) chloride, to form a transient charge-transfer (CT) complex with NXS (N-bromosuccinimide or NBS and N-iodosuccinimide or NIS) in acetonitrile. These transient CT complexes acted as a semi-heterogeneous photocatalyst. These complexes allowed the Ce(III) ions to absorb light, turning them into strong electron donors that transferred electrons to NXS. This created halide radicals from NXS radical anions, helping to turn N-propargylamides into oxazole aldehydes. Experiments with DMPO and spin-trapping showed that a radical-based mechanism followed a single electron transfer (SET) pathway. Notably, CeCl3 was reused after the reaction without much decomposition, as it was regenerated and separated through simple filtration.

Solution-Processed Thick Hole-Transport Layer for Reliable Quantum-Dot Light-Emitting Diodes Based on an Alternatingly Doped Structure.

The operating lifetime of quantum-dot light-emitting diodes (QLED) is a bottleneck for commercial display applications. To enhance the operational stability of QLEDs, we developed a robust solution-processed highly conductive hole-transport-layer (HTL) structure, which enables a thick HTL structure to mitigate the electric field. An alternating doping strategy, which involves multiple alternating stacks of N4,N4'-di(naphthalen-1-yl)-N4,N4'-bis(4-vinylphenyl)biphenyl-4,4'-diamine and phosphomolybdic acid layers, could provide significantly improved conductivity; more specifically, the 90 nm-thick alternatingly doped HTL exhibited higher conductivity than the 45 nm-thick undoped HTL. Therefore, when applied to a QLED, the increase in the thickness of the alternatingly doped HTL increased device reliability. As a result, the lifetime of the QLED with a thick, alternatingly doped HTL was 48-fold higher than that of the QLED with a thin undoped HTL. This alternating doping strategy provides a new paradigm for increasing the stability of solution-based optoelectronic devices in addition to QLEDs.

Spatially Resolved Light-Induced Ferroelectric Polarization in α-In2Se3/Te Heterojunctions.

Light-induced ferroelectric polarization in 2D layered ferroelectric materials holds promise in photodetectors with multilevel current and reconfigurable capabilities. However, translating this potential into practical applications for high-density optoelectronic information storage remains challenging. In this work, an α-In2Se3/Te heterojunction design that demonstrates spatially resolved, multilevel, nonvolatile photoresponsivity is presented. Using photocurrent mapping, the spatially localized light-induced poling state (LIPS) is visualized in the junction region. This localized ferroelectric polarization induced by illumination enables the heterojunction to exhibit enhanced photoresponsivity. Unlike previous reports that observe multilevel polarization enhancement in electrical resistance, the device shows nonvolatile photoresponsivity enhancement under illumination. After polarization saturation, the photocurrent increases up to 1000 times, from 10-12 to 10-9 A under the irradiation of a 520 nm laser with a power of 1.69 nW, compared to the initial state in a self-driven mode. The photodetector exhibits high detectivity of 4.6×1010 Jones, with a rise time of 27 µs and a fall time of 28 µs. Furthermore, the device's localized poling characteristics and multilevel photoresponse enable spatially multiplexed optical information storage. These results advance the understanding of LIPS in 2D ferroelectric materials, paving the way for optoelectronic information storage technologies.

Photobiomodulation with laser and led on mesenchymal stem cells viability and wound closure in vitro.

Mesenchymal stem cells can differentiate into specific cell lineages in the tissue repair process. Photobiomodulation with laser and LED is used to treat several comorbidities, can interfere in cell proliferation and viability, in addition to promoting responses related to the physical parameters adopted. Evaluate and compare the effects of laser and LED on mesenchymal cells, with different energy doses and different wavelengths, in addition to viability and wound closure. Mesenchymal stem cells derived from human adipocytes were irradiated with laser (energy of 0.5 J, 2 J and 4 J, wavelength of 660 nm and 830 nm), and LED (energy of 0.5 J, 2 J and 4 J, where lengths are 630 nm and 850 nm). The wound closure process was evaluated through monitoring the reduction of the lesion area in vitro. Viability was determined by analysis with Hoechst and Propidium Iodide markers, and quantification of viable and non-viable cells respectively Data distributions were analyzed using the Shapiro-Wilk test. Homogeneity was analyzed using Levene's test. The comparison between the parameters used was analyzed using the Two-way ANOVA test. The T test was applied to data relating to viability and lesion area. For LED photobiomodulation, only the 630 nm wavelength obtained a significant result in 24, 48 and 72 h (p = 0,027; p = 0,024; p = 0,009). The results related to the in vitro wound closure test indicate that both photobiomodulation with laser and LED demonstrated significant results considering the time it takes to approach the edges (p < 0.05). Considering the in vitro experimental conditions of the study, it is possible to conclude that the physical parameters of photobiomodulation, such as energy and wavelength, with laser or LED in mesenchymal stem cells, can play a potential role in cell viability and wound closure.

Effects of combined intense pulsed light and cyclosporine 0.05% eyedrops in ocular surface matrix metalloproteinase-9 levels in patients with moderate-to-severe MGD.

To investigate the changes in meibomian gland dysfunction (MGD) and tear matrix metalloproteinase-9 (MMP-9) levels in patients with moderate-to-severe MGD after combined treatment with intense pulsed light (IPL) therapy and cyclosporine 0.05%. Thirty-six patients concurrently treated with IPL and cyclosporine 0.05% ophthalmic drops were retrospectively enrolled. Tear break up time (TBUT), corneal and conjunctival staining scores, Schirmer test, and ocular surface disease index (OSDI) questionnaire responses were recorded. Meibum quality, consistency, and eyelid margin telangiectasia were evaluated. MMP-9 levels were examined by the positivity and signal intensity of red lines (scored 0-4). IPL was performed four times with a vascular filter at 2-week intervals, followed by a 1-month follow-up after treatment cessation. Immediately after each IPL treatment, gentle meibomian gland expression was performed in both the upper and lower eyelids using meibomian gland expressor forceps. TBUT (1.88 ± 1.02 s to 3.12 ± 1.08 s, p < 0.001), corneal and conjunctival staining (6.19 ± 2.11 to 3.12 ± 1.89, p < 0.001), Oxford staining grade (2.66 ± 0.89 to 1.35 ± 0.76, p < 0.001), and OSDI (52.97 ± 21.86 to 36.36 ± 22.45, p < 0.001) scores significantly improved after the combined treatment. Meibum quality, consistency and lid margin telangiectasia showed significant post-treatment improvement in both the upper and lower eyelids. MMP-9 positivity showed a significant decrease (97-69%, p = 0.026) with a reduction in signal intensity (2.72 ± 0.87 to 2.09 ± 0.95, p = 0.011). The combination of IPL therapy and 0.05% cyclosporine eye drops effectively treats moderate-to-severe MGD by reducing symptoms and signs of MGD and by decreasing ocular surface MMP-9-associated inflammation.

Diagnostic performance of light reflex pupillometry in Alzheimer's disease.

Easily applied diagnostic tools such as digital biomarkers for Alzheimer's disease (AD) are urgently needed due to the recent approval of disease-modifying therapies. We aimed to determine the diagnostic performance of hand-held, quantitative light reflex pupillometry (qLRP) in patients with AD in a proof-of-concept, cross-sectional study. Participants underwent qLRP at a university memory clinic from August 2022 to October 2023. We fitted multivariable logistic regression models with qLRP, sex, and age as predictors evaluated with area under the receiver operating characteristics curve (AUROC). In total, 107 patients with AD, 44 patients with mixed AD and vascular cognitive dysfunction (VCD), 53 patients with dementia with Lewy bodies (DLB), and 50 healthy controls (HCs) were included. Our diagnostic models showed similar discriminatory ability (AUROC range 0.74-0.81) when distinguishing patients with AD from HCs and other dementias. The qLRP seems promising as a bedside digital biomarker to aid in diagnosing AD. Highlights: We demonstrated the diagnostic performance of qLRP in Alzheimer's disease.The diagnostic models were robust in sensitivity analyses.qLRP may assist in the bedside diagnostic evaluation of Alzheimer's disease.

Posterior approach to correct for focal plane offsets in lattice light-sheet structured illumination microscopy.

Significance: Lattice light-sheet structured illumination microscopy (latticeSIM) has proven highly effective in producing three-dimensional images with super resolution rapidly and with minimal photobleaching. However, due to the use of two separate objectives, sample-induced aberrations can result in an offset between the planes of excitation and detection, causing artifacts in the reconstructed images. Aim: We introduce a posterior approach to detect and correct the axial offset between the excitation and detection focal planes in latticeSIM and provide a method to minimize artifacts in the reconstructed images. Approach: We utilized the residual phase information within the overlap regions of the laterally shifted structured illumination microscopy information components in frequency space to retrieve the axial offset between the excitation and the detection focal planes in latticeSIM. Results: We validated our technique through simulations and experiments, encompassing a range of samples from fluorescent beads to subcellular structures of adherent cells. We also show that using transfer functions with the same axial offset as the one present during data acquisition results in reconstructed images with minimal artifacts and salvages otherwise unusable data. Conclusion: We envision that our method will be a valuable addition to restore image quality in latticeSIM datasets even for those acquired under non-ideal experimental conditions.

Diagnostic potential of blood plasma longitudinal viscosity measured using Brillouin light scattering.

Blood plasma viscosity (PV) is an established biomarker for numerous diseases. Measurement of the shear PV using conventional rheological techniques is, however, time consuming and requires significant plasma volumes. Here, we show that Brillouin light scattering (BLS) and angle-resolved spectroscopy measurements of the longitudinal PV from microliter-sized plasma volumes can serve as a proxy for the shear PV measured using conventional viscometers. This is not trivial given the distinct frequency regime probed and the longitudinal viscosity, a combination of the shear and bulk viscosity, representing a unique material property on account of the latter. We demonstrate this for plasma from healthy persons and patients suffering from different severities of COVID-19 (CoV), which has been associated with an increased shear PV. We further show that the additional information contained in the BLS-measured effective longitudinal PV and its temperature scaling can provide unique insight into the chemical constituents and physical properties of plasma that can be of diagnostic value. In particular, we find that changes in the effective longitudinal viscosity are consistent with an increased suspension concentration in CoV patient samples at elevated temperatures that is correlated with disease severity and progression. This is supported by results from rapid BLS spatial-mapping, angle-resolved BLS measurements, changes in the elastic scattering, and anomalies in the temperature scaling of the shear viscosity. Finally, we introduce a compact BLS probe to rapidly perform measurements in plastic transport tubes. Our results open a broad avenue for PV diagnostics based on the high-frequency effective longitudinal PV and show that BLS can provide a means for its implementation.

Protein Corona-Directed Cellular Recognition and Uptake of Polyethylene Nanoplastics by Macrophages.

The widespread use of plastic products in daily life has raised concerns about the health hazards associated with nanoplastics (NPs). When exposed, NPs are likely to infiltrate the bloodstream, interact with plasma proteins, and trigger macrophage recognition and clearance. In this study, we focused on establishing a correlation between the unique protein coronal signatures of high-density (HDPE) and low-density (LDPE) polyethylene (PE) NPs with their ultimate impact on macrophage recognition and cytotoxicity. We observed that low-density and high-density lipoprotein receptors (LDLR and SR-B1), facilitated by apolipoproteins, played an essential role in PE-NP recognition. Consequently, PE-NPs activated the caspase-3/GSDME pathway and ultimately led to pyroptosis. Advanced imaging techniques, including label-free scattered light confocal imaging and cryo-soft X-ray transmission microscopy with 3D-tomographic reconstruction (nano-CT), provided powerful insights into visualizing NPs-cell interactions. These findings underscore the potential risks of NPs to macrophages and introduce analytical methods for studying the behavior of NPs in biological systems.

Light quality induces a shift in coccosphere morphology in Scyphosphaera apsteinii.

The coccolithophore Schyphosphaera apsteinii produces distinct coccolith morphotypes and offers a unique insight into coccolith calcification, as the number of lopadoliths per cell increases under low light intensities. This study employs S. apsteinii to investigate the acclimated impact of light intensity and wavelength on cell physiology and coccosphere morphology. Our findings reveal a marked increase in lopadolith production when grown under reduced light intensity, with lower growth rates, higher chlorophyll concentration and elevated net photosynthetic rates. Reduced blue-light also caused an increase in lopadolith numbers, elevated chlorophyll concentrations and net photosynthetic rates. Conversely, such responses are less pronounced under reduced red-light. Moreover, reduced blue- and red-light treatments exhibited enhanced growth rates compared to the light-replete control, despite a reduction in light intensity. Our findings suggest that changes in light quality cause a shift in the coccosphere morphology, affecting cell physiology and potentially aiding light harvesting in S. apsteinii.