Designing Dual-Responsive Drug Delivery Systems: The Role of Phase Change Materials and Metal-Organic Frameworks.

Stimuli-responsive drug delivery systems (DDSs) offer precise control over drug release, enhancing therapeutic efficacy and minimizing side effects. This review focuses on DDSs that leverage the unique capabilities of phase change materials (PCMs) and metal-organic frameworks (MOFs) to achieve controlled drug release in response to pH and temperature changes. Specifically, this review highlights the use of a combination of lauric and stearic acids as PCMs that melt slightly above body temperature, providing a thermally responsive mechanism for drug release. Additionally, this review delves into the properties of zeolitic imidazolate framework-8 (ZIF-8), a stable MOF under physiological conditions that decomposes in acidic environments, thus offering pH-sensitive drug release capabilities. The integration of these materials enables the fabrication of complex structures that encapsulate drugs within ZIF-8 or are enveloped by PCM layers, ensuring that drug release is tightly controlled by either temperature or pH levels, or both. This review provides comprehensive insights into the core design principles, material selections, and potential biomedical applications of dual-stimuli responsive DDSs, highlighting the future directions and challenges in this innovative field.

Optimization Design and Performance Study of Wearable Thermoelectric Device Using Phase Change Material as Heat Sink.

Wearable thermoelectric generators have great potential to provide power for smart electronic wearable devices and miniature sensors by harnessing the temperature difference between the human body and the environment. However, the Thomson effect, the Joule effect, and heat conduction can cause a decrease in the temperature difference across the thermoelectric generator during operation. In this paper, phase change materials (PCMs) were employed as the heat sink for the thermoelectric generator, and the COMSOL software 6.1 was utilized to simulate and optimize the power generation processes within the heat sink. The results indicated that with a PCM height of 40 mm, phase transition temperature of 293 K, latent heat of 200 kJ/kg, phase transition temperature interval of 5 K, thermal conductivity of 50 W/(m·K), isobaric heat capacity of 2000 J/(Kg·K), density of 1000 kg/m3, and convective heat transfer coefficient of 10 W/(m·K), the device can maintain a temperature difference of 18-10 K for 1930 s when the thermoelectric leg height is 1.6 mm, and 3760 s when the thermoelectric leg height is 2.7 mm. These results demonstrate the correlation between the device's output performance and the dimensions and performance parameters of the PCM heat sink, thereby validating the feasibility of employing the PCM heat sink and the necessity for systematic investigations.

Unveiling the unique potential of MXene with and without graphene nanoplatelet for thermal energy storage applications.

Solar thermal energy storage (TES) is an outstanding innovation that can help solar technology remain relevant during nighttime and cloudy days. TES using phase change material (PCM) is an avant-garde solution for a clean and renewable energy transition. The present study unveils the unique potential of MXene as a performance enhancer in lauric acid (LA), which functions as a base PCM. The addition of graphene nanoplatelet (GNP) into the LA-MXene composite is prepared to comprehend and evaluate the benefits and detriments of adding carbon-based nanomaterial into the PCM via a two-step homogenizing method. A similar weight percentage of MXene and GNP at 0.75 was used for composite synthesis. The study found that the enthalpy of LA-MXene is comparable to LA at 169.87 J/kg and greater than LA-MXene/GNP, which has 137.53 J/kg. Regarding thermal storage performance, LA-MXene exhibited outstanding performance compared to LA-MXene/GNP in terms of enthalpy efficiency (λ) and relative enthalpy efficiency (η), achieving 95.4% and 96.1%, respectively. This is supported by the XPS spectra, which show that the crosslinking structure acted as a barrier, reinforcing the material and preventing further thermal degradation. This has resulted in robust and denser shells that significantly improved light absorption, enhancing both the photothermal conversion and thermal energy storage efficiency of LA/MXene. The present study reveals that LA-MXene is a promising and optimal candidate for the feasibility and reliability of TES in solar renewable energy applications. It was observed that the incorporation of exclusive MXene may effectively address the limitations of LA as a conventional PCM and surpass the traditional role of GNP. This study offers valuable insights into the superior performance of MXene alone, eliminating the need for doping with various nanomaterials and thereby reducing the complexity in synthesizing the PCM.

Neonatal therapeutic hypothermia in a regional swedish cohort: Adherence to guidelines, transport and outcomes.

AIM: Swedish guidelines for therapeutic hypothermia (TH) after perinatal asphyxia were established in 2007, following several randomised studies that demonstrated improved outcomes. We assessed the implementation of hypothermia treatment in a mid-Swedish region with a sizeable proportion of outborn infants. METHOD: A population-based TH cohort from 2007 to 2015 was scrutinised for adherence to national guidelines, interhospital transport, including the use of a cooling mattress made of phase change material for thermal management, and outcomes. RESULTS: Of 136 admitted infants, 99 (73 %) were born outside the hospital. Ninety-eight percent fulfilled the criteria for postnatal depression/acidosis, and all patients had moderate-to-severe encephalopathy. Treatment was initiated within 6 h in 85 % of patients; amplitude-integrated electroencephalography/electroencephalography was recorded in 98 %, cranial ultrasound in 78 %, brain magnetic resonance imaging in 79 %, hearing tests in all, and follow-up was performed in 93 %. Although target body temperature was attained later (p < 0.01) in outborn than in inborn infants, at a mean (standard deviations) age of 6.2 (3.2) h vs 4.4 (2.6) h, 40 % of those transported using the cooling mattress were already within the therapeutic temperature range on arrival, and few were excessively cooled. The mortality rate was 23 %, and 38 % of the survivors had neurodevelopmental impairment at a median of 2.5 years. CONCLUSION: The regionalisation of TH, including interhospital transport, was feasible and resulted in outcomes comparable to those of randomised controlled studies.

Carbon-Enhanced Hydrated Salt Phase Change Materials for Thermal Management Applications.

Inorganic hydrated salt phase change materials (PCMs) hold promise for improving the energy conversion efficiency of thermal systems and facilitating the exploration of renewable thermal energy. Hydrated salts, however, often suffer from low thermal conductivity, supercooling, phase separation, leakage and poor solar absorptance. In recent years, compounding hydrated salts with functional carbon materials has emerged as a promising way to overcome these shortcomings and meet the application demands. This work reviews the recent progress in preparing carbon-enhanced hydrated salt phase change composites for thermal management applications. The intrinsic properties of hydrated salts and their shortcomings are firstly introduced. Then, the advantages of various carbon materials and general approaches for preparing carbon-enhanced hydrated salt PCM composites are briefly described. By introducing representative PCM composites loaded with carbon nanotubes, carbon fibers, graphene oxide, graphene, expanded graphite, biochar, activated carbon and multifunctional carbon, the ways that one-dimensional, two-dimensional, three-dimensional and hybrid carbon materials enhance the comprehensive thermophysical properties of hydrated salts and affect their phase change behavior is systematically discussed. Through analyzing the enhancement effects of different carbon fillers, the rationale for achieving the optimal performance of the PCM composites, including both thermal conductivity and phase change stability, is summarized. Regarding the applications of carbon-enhanced hydrate salt composites, their use for the thermal management of electronic devices, buildings and the human body is highlighted. Finally, research challenges for further improving the overall thermophysical properties of carbon-enhanced hydrated salt PCMs and pushing towards practical applications and potential research directions are discussed. It is expected that this timely review could provide valuable guidelines for the further development of carbon-enhanced hydrated salt composites and stimulate concerted research efforts from diverse communities to promote the widespread applications of high-performance PCM composites.

Advancements in Nanomaterial Dispersion and Stability and Thermophysical Properties of Nano-Enhanced Phase Change Materials for Biomedical Applications.

Phase change materials (PCMs) are materials that exhibit thermal response characteristics, allowing them to be utilized in the biological field for precise and controllable temperature regulation. Due to considerations of biosafety and the spatial limitations within human tissue, the amount of PCMs used in medical applications is relatively small. Therefore, researchers often augment PCMs with various materials to enhance their performance and increase their practical value. The dispersion of nanoparticles to modify the thermophysical properties of PCMs has emerged as a mature concept. This paper aims to elucidate the role of nanomaterials in addressing deficiencies and enhancing the performance of PCMs. Specifically, it discusses the dispersion methods and stabilization mechanisms of nanoparticles within PCMs, as well as their effects on thermophysical properties such as thermal conductivity, latent heat, and specific heat capacity. Furthermore, it explores how various nano-additives contribute to improved thermal conductivity and the mechanisms underlying enhanced latent heat and specific heat. Additionally, the potential applications of PCMs in biomedical fields are proposed. Finally, this paper provides a comprehensive analysis and offers suggestions for future research to maximize the utilization of nanomaterials in enhancing the thermophysical properties of PCMs for biomedical applications.

Vapor Pressure and Enthalpy of Vaporization of Guanidinium Methanesulfonate as a Phase Change Material for Thermal Energy Storage.

This paper reports the vapor pressure and enthalpy of vaporization for a promising phase change material (PCM) guanidinium methanesulfonate ([Gdm][OMs]), which is a typical guanidinium organomonosulfonate that displays a lamellar crystalline architecture. [Gdm][OMs] was purified by recrystallization. The elemental analysis and infrared spectrum of [Gdm][OMs] confirmed the purity and composition. Differential scanning calorimetry (DSC) also confirmed its high purity and showed a sharp and symmetrical endothermic melting peak with a melting point (Tm) of 207.6 °C and a specific latent heat of fusion of 183.0 J g-1. Thermogravimetric analysis (TGA) reveals its thermal stability over a wide temperature range, and yet three thermal events at higher temperatures of 351 °C, 447 °C, and 649 °C were associated with vaporization or decomposition. The vapor pressure was measured using the isothermogravimetric method from 220 °C to 300 °C. The Antoine equation was used to describe the temperature dependence of its vapor pressure, and the substance-dependent Antoine constants were obtained by non-linear regression. The enthalpy of vaporization (ΔvapH) was derived from the linear regression of the slopes associated with the linear temperature dependence of the rate of weight loss per unit area of vaporization. Hence, the temperature dependence of vapor pressures ln Pvap (Pa) = 10.99 - 344.58/(T (K) - 493.64) over the temperature range from 493.15 K to 573.15 K and the enthalpy of vaporization ΔvapH = 157.10 ± 20.10 kJ mol-1 at the arithmetic mean temperature of 240 °C were obtained from isothermogravimetric measurements using the Antoine equation and the Clausius-Clapeyron equation, respectively. The flammability test indicates that [Gdm][OMs] is non-flammable. Hence, [Gdm][OMs] enjoys very low volatility, high enthalpy of vaporization, and non-flammability in addition to its known advantages. This work thus offers data support, methodologies, and insights for the application of [Gdm][OMs] and other organic salts as PCMs in thermal energy storage and beyond.

Analysis of Underwater Melting Process and Leakage Plugging Performance of Phase-Change Materials.

Leakage is a high-incidence disease of embankment dams, and efficiently addressing this disease guarantees the safe operation of dams. Underwater leakage self-priming plugging technology is a new technology that utilizes the melting and solidifying characteristics of phase-change materials and the negative pressure in the leakage entry area to accurately plug the leakage. However, little is yet known about the underwater melting process of phase-change materials and how their characteristics influence the plugging effect. In this study, three kinds of phase-change materials, namely, paraffin, rosin, and stearic acid, were used to conduct underwater leakage self-priming plugging tests, observe and analyze the underwater melting process, and compare the plugging effects. The results showed that the underwater melting process of phase-change materials exhibited different plugging window periods depending on their melting points, specific heat capacities, and mobilities, which were the main factors affecting their plugging effects. In the final plugging stage, paraffin had the best plugging effect, but the material strength was low; rosin had good plugging compactness, but the fluidity performance was poor, and the material effective utilization was low; stearic acid had a low melting point but dispersed easily. Therefore, a blocking material with a suitable blocking window period can be produced by adjusting the material properties accordingly for an improved blocking effect.

Experimental and Numerical Investigation of Macroencapsulated Phase Change Materials for Thermal Energy Storage.

Among the different types of phase change materials, paraffin is known to be the most widely used type due to its advantages. However, paraffin's low thermal conductivity, its limited operating temperature range, and leakage and stabilization problems are the main barriers to its use in applications. In this research, a thermal energy storage unit (TESU) was designed using a cylindrical macroencapsulation technique to minimize these problems. Experimental and numerical analyses of the storage unit using a tubular heat exchanger were carried out. The Ansys 18.2-Fluent software was used for the numerical analysis. Two types of paraffins with different thermophysical properties were used in the TESU, including both encapsulated and non-encapsulated forms, and their thermal energy storage performances were compared. The influence of the heat transfer fluid (HTF) inlet conditions on the charging performance (melting) was investigated. The findings demonstrated that the heat transfer rate is highly influenced by the HTF intake temperature. When the effect of paraffin encapsulation on heat transfer was examined, a significant decrease in the total melting time was observed as the heat transfer surface and thermal conductivity increased. Therefore, the energy stored simultaneously increased by 60.5% with the encapsulation of paraffin-1 (melting temperature range of 52.9-60.4 °C) and by 50.7% with the encapsulation of paraffin-2 (melting temperature range of 32.2-46.1 °C), thus increasing the charging rate.

Thermal Performance of Heat Sink Filled with Double-Porosity Porous Aluminum Skeleton/Paraffin Phase Change Material.

Phase change materials (PCMs) are used to cool high-power-density electronic devices because of their high latent heat and chemical stability. However, their low thermal conductivity limits the application of PCMs. To solve this problem, a double-porosity porous aluminum skeleton/paraffin phase change materials (DPAS/PCM) was prepared via additive manufacturing and the water-bath method. The thermal performance of the DPAS/PCM heat sink (HS) was experimentally investigated to examine the effects of the positive- and reverse-gradient porosity structures of the DPAS/PCM. The results show that a positive-gradient porosity arrangement is more conducive to achieving a low-temperature cooling target for LED operation. In particular, the temperature control time for the positive gradient porosity structure increased by 4.6-13.7% compared with the reverse gradient porosity structure. Additionally, the thermal performances of uniform porous aluminum skeleton/paraffin (UAS) and DPAS/PCMs were investigated. The temperature control effect of the DPAS/PCM was better than that of the UAS/PCM HS at high critical temperatures. Compared with the UAS/PCM HS, the temperature control time of the DPAS/PCM HS is increased by 7.8-12.5%. The results of this work show that the prepared DPAS/PCM is a high-potential hybrid system for thermal management of high-power electronic devices.

Intelligent Tunable Wave-Absorbing CNTs/VO2/ANF Composite Aerogels Based on Temperature-Driving.

The development of new electromagnetic absorbing materials is the main strategy to address electromagnetic radiation. Once traditional electromagnetic wave-absorbing materials are prepared, it is difficult to dynamically change their electromagnetic wave-absorbing performance. Facing the complexity of the information age and the rapid development of modern radar, it is significant to develop intelligent modulation of electromagnetic wave-absorbing materials. Here, CNTs/VO2/ANF composite aerogels with dynamic frequency tunability and switchable absorption on/off were synthesized. Based on the phase change behavior of VO2, the degree of polarization and interfacial effects of multiple heterogeneous interfaces between VO2 and CNTs and aramid nanofibers (ANFs) were modulated at different temperatures. With the increase in temperature (from 25 to 200 °C), the maximum absorption frequency of the frequency tunable aerogel is modulated from 12.24 to 8.56 GHz in the X-band, and the absorption intensity remains stable. The maximum effective switching bandwidth (ΔEAB) of the wave-absorbing switchable aerogel is 3.70 GHz. This study provides insights into intelligent electromagnetic wave absorption performance and paves the way for temperature-driven application of intelligent modulation of electromagnetic absorbers.

Long-Lasting Heat Dissipation of Flexible Heat Sinks for Wearable Thermoelectric Devices.

Flexible wearable thermoelectric (TE) devices hold great promise for a wide range of applications in human thermal management and self-powered systems. Currently, the main challenge faced by flexible TE devices is the inadequate dissipation of heat, which hinders the maintenance of significant temperature differences over prolonged periods. Most existing heat sinks, being rigid in nature, compromise the overall flexibility of the device. Therefore, the challenge lies in maintaining device flexibility while ensuring effective heat dissipation. In this study, we developed a flexible phase-change material (FPCM) heat sink to address this issue and enhance the heat dissipation capabilities of TE devices (FPCM-TED). When used as a thermoelectric cooler (TEC), the FPCM heat sink efficiently absorbs heat from the hot end, enabling long-lasting and high-performance cooling of the TEC. This capability effectively reduces body temperature by up to 11.21 °C and can be sustained for at least 300 s. Additionally, when employed as a thermoelectric generator (TEG), the FPCM absorbs heat at the cold end, thereby increasing the temperature difference between the hot and cold ends and enhancing the output performance of the device. By integrating FPCM-TED into a fabric wristband, we successfully developed a self-powered wireless pedometer sensing system. This breakthrough lays a solid foundation for the application of wearable, smart clothing.

Uncovering Temperature-Insensitive Feature of Phase Change Thermal Storage Electrolyte for Safe Lithium Battery.

Lithium-ion batteries (LIBs) have emerged as highly promising energy storage devices due to their high energy density and long cycle life. However, their safety concern, particularly under thermal shock, hinders their widespread applications. Herein, a temperature-insensitive electrolyte (TI-electrolyte) with exceptional resistance to thermal stimuli is presented to address the safety issues arising from the lack of thermal abuse tolerance in LIBs. The TI-electrolyte is composed of two phase-change polymers with differentiation melting points (60 and 35°C for polycaprolactone and polyethylene glycol respectively), delivering a wide temperature-resistant range. It is demonstrated that the TI-electrolyte possesses a heat capacity of 27.3 J g-1. The crystalline region in the TI-electrolyte shrinks when confronted with above-ambient temperature, absorbing heat to unlock molecular chains fixed in the crystal lattice, becoming amorphous. Notably, the Li||LFP pouch cell delays 3 valuable minutes to achieve the same temperature as conventional liquid electrolytes (LE) when subjected to thermal shocks, paralleling with the simulation results. Moreover, symmetrical Li||Li cell cycles stably for over 600 h at 0.1 mA cm-2, and Li||LFP full cell demonstrates excellent electrochemical performance, with a capacity of 142.7 mAh g-1 at 0.5 C, thus representing a critical approach to enhancing the safety of LIBs.

Boosting thermal energy transport across the interface between phase change materials and metals via self-assembled monolayers.

Thermal energy storage using phase change materials (PCMs) has great potential to reduce the weather dependency of sustainable energy sources. However, the low thermal conductivity of most PCMs is a long-standing bottleneck for large-scale practical applications. In modifications to increase the thermal conductivity of PCMs, the interfacial thermal resistance (ITR) between PCMs and discrete additives or porous networks reduces the effective thermal energy transport. In this work, we investigated the ITR between a metal (gold) and a polyol solid-liquid PCM (erythritol) at various temperatures including temperatures below the melting point (300 and 350 K), near the melting point (390, 400, 410 K, etc) and above the melting point (450 and 500 K) adopting non-equilibrium molecular dynamics. Since the gold-erythritol interfacial thermal conductance (ITC) is low regardless of whether erythritol is melted or not (<40 MW m-2K-1), self-assembled monolayers (SAMs) were used to boost the interfacial thermal energy transport. The SAM with carboxyl groups was found to increase the ITC most (by a factor of 7-9). As the temperature increases, the ITC significantly increases (by ∼50 MW m-2K-1) below the melting point but decreases little above the melting point. Further analysis revealed that the most obvious influencing factor is the interfacial binding energy. This work could build on existing composite PCM solutions to further improve heat transfer efficiency of energy storage applications in both liquid and solid states.

Advanced Anti-Icing Strategies and Technologies by Macrostructured Photothermal Storage Superhydrophobic Surfaces.

Water is the source of life and civilization, but water icing causes catastrophic damage to human life and diverse industrial processes. Currently, superhydrophobic surfaces (inspired by the lotus effect) aided anti-icing attracts intensive attention due to their energy-free property. Here, recent advances in anti-icing by design and functionalization of superhydrophobic surfaces are reviewed. The mechanisms and advantages of conventional, macrostructured, and photothermal superhydrophobic surfaces are introduced in turn. Conventional superhydrophobic surfaces, as well as macrostructured ones, easily lose the icephobic property under extreme conditions, while photothermal superhydrophobic surfaces strongly rely on solar illumination. To address the above issues, a potentially smart strategy is found by developing macrostructured photothermal storage superhydrophobic (MPSS) surfaces, which integrate the functions of macrostructured superhydrophobic materials, photothermal materials, and phase change materials (PCMs), and are expected to achieve all-day anti-icing in various fields. Finally, the latest achievements in developing MPSS surfaces, showcasing their immense potential, are highlighted. Besides, the perspectives on the future development of MPSS surfaces are provided and the problems that need to be solved in their practical applications are proposed.

Structure Design and Heat Transfer Performance Analysis of a Novel Composite Phase Change Active Cooling Channel Wall for Hypersonic Aircraft.

Efficient and stable heat dissipation structure is crucial for improving the convective heat transfer performance of thermal protection systems (TPSs) for hypersonic aircraft. However, the heat dissipation wall of the current TPS is limited by a single material and structure, inefficiently dissipating the large amount of accumulated heat generated during the high-speed maneuvering flight of hypersonic aircraft. Here, a convection cooling channel structure of TPS is proposed, which is an innovative multi-level structure inspired by the natural honeycomb. An active cooling channel (PCM-HC) is designed by using a variable-density topology optimization method and filled with phase change material (PCM). Numerical simulations are used to investigate the thermal performance of the PCM-HC wall, focusing on the influence of PCM properties, structural geometric parameters, and PCM types on heat transfer characteristics. The results demonstrate that the honeycomb-like convection cooling channel wall, combined with PCM latent heat of phase change, exhibits superior heat dissipation capability. With a heat flux input of 50 kW/m2, the maximum temperature on the inner wall of PCM-HC is reduced by 12 K to 20 K. Different PCMs have opposing effects on heat transfer performance due to their distinct thermophysical properties. This work can provide a theoretical basis for the design of high-efficiency cooling channel, improving the heat dissipation performance in the TPS of hypersonic aircraft.

Multitask Learning Deep Neural Networks Enable Embedded Design of Active Metamaterials.

In this study, we propose and implement a deep neural network framework based on multitask learning aimed at simplifying the forward modeling and inverse design process of photonic devices integrating active metasurfaces. We demonstrate and validate our approach by constructing a continuously tunable bandpass filter that is effective in the midwave infrared region. The key to this filter is the combination of a metasurface and Fabry-Perot (F-P) cavity structure of the tunable phase-change material Ge2Sb2Se4Te (GSST) and the precise control of the crystallinity of the GSST by a silicon-based heater. With the help of a deep learning framework, we are able to independently model the crystallinity and geometric parameters of the filter to maximize the use of GSST tuning for bandpass filtering. Our model discusses the self-attention mechanism and the effect of noise and compares several existing popular algorithms, and the results show that a multitask deep learning strategy can better assist the on-demand reverse design of photonic structures with phase change materials. This opens up new possibilities for personalization and functional extension of optical devices.

Coconut shell-derived activated carbon-enhanced water phase change material for cold thermal energy storage.

In building cooling, the demand for cooling surges during specific times, stressing air-conditioner operation, and additional cooling is often wasted during low-demand periods. Water-phase change material (W-PCM)-based thermal energy storage (TES) allows for load shifting and effective management of peak demand by storing cooling energy when the demand is low. This stored energy can be deployed during peak hours, decreasing energy usage and associated CO2 emissions. However, the use of W-PCMs was hindered by phase separation, slow energy transfer, and high supercooling degree (SCD). We synthesized coconut shell (CNS)-produced activated carbon (ACC) to use as a thermal enhancer in W-PCMs for the first time. First, ACC was synthesized from CNS via steam activation. Then, transmission electron microscopy was used to confirm the pore morphology of the CNS-ACC. The synthesis of the W-PCM with various weight percentages (0.1, 0.6, and 1.2) of CNS-ACC was accomplished in two steps. Zeta potential distribution analysis revealed that the W-PCM with CNS-ACC exhibited colloidal stability. Thermal conductivity (TC) and thermogram analyses revealed that a dose of 1.2 wt% CNS-ACC enhanced liquid and solid TC by 9% and 22%, respectively, despite a 6% and 8% decrease in specific heat and latent heat. More specifically, solidification assessment in a spherical enclosure revealed 100% suppression of SCD with 1.2 wt% CNS-ACC. As a result of this and the enhanced TC, the overall solidification process was accelerated, reducing the overall duration by 18.5%. Thus, the combination of CNS-derived ACC and W-PCM for TES in building cooling could reduce energy consumption and associated CO2 emissions.

Hybrid Ghost Phonon Polaritons in Thin-Film Heterostructure.

Ghost phonon polaritons (g-PhPs), a unique class of phonon polaritons in the infrared, feature ultralong diffractionless propagation (>20 µm) across the surface and tilted wavefronts in the bulk. Here, we study hybrid g-PhPs in a heterostructure of calcite and an ultrathin film of the phase change material (PCM) In3SbTe2, where the optical field is bound in the PCM film with enhanced confinement compared with conventional g-PhPs. Near-field optical images for hybrid g-PhPs reveal a lemniscate pattern in the momentum distribution. We fabricated In3SbTe2 gratings and investigated how different orientations and periodicities of gratings impact the propagation of hybrid g-PhPs. As the grating period decreases to zero, the wavefront of hybrid g-PhPs can be dynamically steered by varying the grating orientation. Our results highlight the promise of hybrid g-PhPs with tunable functionalities for nanophotonic studies.

Phase-change behavior of RuSbTe thin film for photonic applications with amplitude-only modulation.

Ge2Sb2Te5 (GST), the most mature phase-change materials (PCM), functions as a recoding layer in nonvolatile memory and optical discs by contrasting the physical properties upon phase transition between amorphous and crystalline phases. However, GST faces challenges such as a large extinction coefficient (k) and low thermal stability of the amorphous phase. In this study, we introduce RuSbTe as a new PCM to address the GST concerns. Notably, the crystallization temperature of the amorphous RuSbTe is approximately 350 °C, significantly higher than GST. A one-order-of-magnitude increase in the resistivity contrast was observed upon phase transition. The crystalline (0.35-0.50 eV) and amorphous (0.26-0.37 eV) phases exhibit relatively small band gap values, resulting in substantial k. Although RuSbTe demonstrates a k difference of approximately 1 upon crystallization at the telecommunications C-band, the refractive index (n) difference is negligible. Unlike GST, which induces both phase retardation and amplitude modulation in its optical switch device, RuSbTe exhibits amplitude-only modulation. This study suggests that RuSbTe has the potential to enable new photonic computing devices that can independently control the phase and amplitude. Combining RuSbTe with phase-only modulators could open avenues for advanced applications.