Tris(triazolo)triazine-based Covalent Organic Frameworks for Efficiently Photocatalytic Hydrogen Peroxide Production.

Two-dimensional covalent organic frameworks (2D-COFs) have recently emerged as fascinating scaffolds for solar-to-chemical energy conversion because of their customizable structures and functionalities. Herein, two tris(triazolo)triazine-based COF materials (namely COF-JLU51 and COF-JLU52) featuring large surface area, high crystallinity, excellent stability and photoelectric properties were designed and constructed for the first time. Remarkably, COF-JLU51 gave an outstanding H2O2 production rate of over 4200 µmol g-1 h-1 with excellent reusability in pure water and O2 under one standard sun light, that higher than its isomorphic COF-JLU52 and most of the reported metal-free materials, owing to its superior generation, separation and transport of photogenerated carriers. Experimental and theoretical researches prove that the photocatalytic process undergoes a combination of indirect 2e- O2 reduction reaction (ORR) and 4e- H2O oxidation reaction (WOR). Specifically, an ultrahigh yield of 7624.7 µmol g-1 h-1 with apparent quantum yield of 18.2% for COF-JLU52 was achieved in a 1:1 ratio of benzyl alcohol and water system. This finding contributes novel, nitrogen-rich and high-quality tris(triazolo)triazine-based COF materials, and also designate their bright future in photocatalytic solar transformations.

In situ nitrogen-doped graphene-TiO2 nano-hybrid as an efficient photocatalyst for pollutant degradation.

To solve environmental-related issues (wastewater remediation, energy conservation and air purification) caused by rapid urbanization and industrialization, synthesis of novel and modified nanostructured photocatalyst has received increasing attention in recent years. We herein report the facile synthesis of in situ nitrogen-doped chemically anchored TiO2 with graphene through sol-gel method. The structural analysis using X-ray diffraction showed that the crystalline nitrogen-doped graphene-titanium dioxide (N-GT) nanocomposite is mainly composed of anatase with minor brookite phase. Raman spectroscopy revealed the graphene characteristic band presence at low intensity level in addition to the main bands of anatase TiO2. X-ray photoelectron spectroscopy analysis disclosed the chemical bonding of TiO2 with graphene via Ti-O-C linkage, also the substitution of nitrogen dopant in both TiO2 lattice and into the skeleton of graphene nanoflakes. UV-Vis absorption spectroscopy analysis established that the modified material can efficiently absorb the longer wavelength range photons due to its narrowed band gap. The N0.06-GT material showed the highest degradation efficiency over methylene blue (MB, ∼98%) under UV and sulfamethoxazole (SMX, ∼ 90.0%) under visible light irradiation. The increased activity of the composite is credited to the synergistic effect of high surface area via greater adsorption capacity, narrowed band gap via increased photon absorption, and reduced e-/h+ recombination via good electron acceptability of graphene nanoflakes and defect sites (Ti3+ and oxygen vacancy (Vo)). The ROS experiments further depict that primarily hydroxyl radicals (OH•) and superoxide anions (O2•-) are responsible for the pollutant degradation in the process redox reactions. In summary, our findings specify new insight into the fabrication of this new material whose efficiency can be further tested in applications like H2 production, CO2 conversion to value-added products, and in energy conservation and storage.

Quantifying Ultrafast Energy Transfer from Plasmonic Hot Carriers for Pulsed Photocatalysis on Nanostructures.

Photocatalysis with plasmonic nanostructures has lately emerged as a transformative paradigm to drive and alter chemical reactions using light. At the surface of metallic nanoparticles, photoexcitation results in strong near fields, short-lived high-energy "hot" carriers, and light-induced heating, thus creating a local environment where reactions can occur with enhanced efficiencies. In this context, it is critical to understand how to manipulate the nonequilibrium processes triggered by light, as their ultrafast (femto- to picoseconds) relaxation dynamics compete with the process of energy transfer toward the reactants. Accurate predictions of the plasmon photocatalytic activity can lead to optimized nanophotonic architectures with enhanced selectivity and rates, operating beyond the intrinsic limitations of the steady state. Here, we report on an original modeling approach to quantify, with space, time, and energy resolution, the ultrafast energy exchange from plasmonic hot carriers (HCs) to molecular systems adsorbed on the metal nanoparticle surface while consistently accounting for photothermal bond activation. Our analysis, illustrated for a few typical cases, reveals that the most energetic nonequilibrium carriers (i.e., with energies well far from the Fermi level) may introduce a wavelength-dependence of the reaction rates, and it elucidates on the role of the carriers closer to the Fermi energy and the photothermally heated lattice, suggesting ways to enhance and optimize each contribution. We show that the overall reaction rates can benefit strongly from using pulsed illumination with the optimal pulse width determined by the properties of the system. Taken together, these results contribute to the rational design of nanoreactors for pulsed catalysis, which calls for predictive modeling of the ultrafast HC-hot adsorbate energy transfer.

3D imaging photocatalytically degraded micro- and nanoplastics.

Microplastics (MPs) and nanoplastics have been an emerging global concern, with hazardous effects on plant, animal, and human health. Their small size makes it easier for them to spread to various ecosystems and enter the food chain; they are already widely found in aqueous environments and within aquatic life, and have even been found within humans. Much research has gone into understanding micro-/nanoplastic sources and environmental fate, but less work has been done to understand their degradation. Photocatalytic degradation is a promising green technique that uses visible or ultraviolet light in combination with photocatalyst to degrade plastic particles. While complete degradation, reducing plastics to small molecules, is often the goal, partial degradation is more common. We examined microscale polyethylene (PE) (125-150µm in diameter) and nanoscale polystyrene (PS) (∼300 nm in diameter) spheres both before and after degradation using multiple imaging techniques, especially electron tomography in addition to conventional electron microscopy. Electron tomography is able to image the 3D exterior and interior of the nanoplastics, enabling us to observe within aggregates and inside degraded spheres, where we found potentially open interior structures after degradation. These structures may result from differences in degradation and aggregation behavior between the different plastic types, with our work finding that PE MPs typically cracked into sharp fragments, while PS nanoplastics often fragmented into smoother, more curved shapes. These and other differences, along with interior and 3D surface images, provide new details on how the structure and aggregation of PE MPs and PS nanoplastics changes when degraded, which could influence how the resulting worn particles are collected or treated further.

Boosting Photocatalytic Hydrogen Production by MOF-derived Metal Oxide Heterojunctions with a 10.0% Apparent Quantum Yield.

Photocatalytic hydrogen production offers an alternative pathway to establish a sustainable energy economy. While numerous photoactive materials exhibit potential for generating hydrogen from water, the synergy achieved by combining two different materials with complementary properties in the form of heterojunctions can significantly their photocatalytic activity. Our study describes the design and generation of the metal-organic framework-derived (MOF) metal oxide heterojunction composed of RuO2/N,S-TiO2. The RuO2/N,S-TiO2 is generated through the pyrolysis of MOFs, Ru- HKUST-1, and the amino-functionalized MIL-125-NH2. Among the various RuO2/N,S- TiO2 materials tested, the material characterized by the lowest RuO2 content, exhibited the highest hydrogen evolution rate, producing 10,761 µmol·hr-1·g-1 of hydrogen with an apparent quantum-yield of 10.0% in pure water. In addition to RuO2/N,S-TiO2, we generated two other MOF-derived metal-oxide heterojunctions, ZnO/N,S-TiO2 and In2O3/N,S-TiO2, leading to apparent quantum yields of 0.7% and 0.3%, respectively. The remarkable photocatalytic activity observed in RuO2/N,S-TiO2 is thought to be attributed to the synergistic effects arising from the combination of metallic properties inherent in the metal oxides, their band alignment, porosity, and surface properties inherited from the parent MOFs. The photocatalytic efficiency of RuO2/N,S-TiO2 was further demonstrated in actual water samples, producing hydrogen with a rate of 8,190 µmol·hr-1·g-1 in tap water.

Solar light driven degradation of piroxicam and paracetamol by heterogeneous photocatalytic fenton system: Process optimization, mechanistic studies and toxicity assessment.

The widespread occurence of pharmaceutical pollutants seriously threatens the environment and human well-being. In the present study, zinc ferrite nanoparticles (ZnFe2O4 NPs) have been synthesized by co-precipitation method and used as photocatalyst for the degradation of two most commonly prescribed painkillers, piroxicam (PXM) and paracetamol (PCM), via heterogeneous Fenton process under the solar light. The synthesized ZnFe2O4 NPs showed a narrower band gap i.e. 1.87 eV, signifying the ability to efficiently work in visible light range. In context of photocatalytic applications, the operational conditions were optimized to achieve maximum degradation. PCM and PXM were completely degraded (100%) at the optimized photocatalytic dose (20 mg L-1), reaction time (180 min), initial drug concentration (10 mg L-1), and pH (6.0), which is close to the natural environment. The extent of mineralization as estimated by the reduction of total organic carbon (TOC) was observed to be ∼91 and 82% for PCM and PXM respectively. Kinetic studies revealed that photocatalytic degradation followed pseudo-first-order kinetics. Moreover, the ZnFe2O4 NPs retained ∼90 % of photocatalytic activity after five consecutive reaction cycles, showing remarkable reusability and stability of catalyst.

Enhancement of light-driven adsorption efficacy through the integration of NiCo2O4 onto CeO2 for photo-ozone catalytic degradation of toluene.

In this study, a co-catalytic route was explored to enhance the photo-ozone catalytic degradation of volatile organic compounds (VOCs). NiCo2O4 was loaded onto the surface of CeO2 nanoparticles to create a composite catalyst (10%NiCo2O4/CeO2). The integration of NiCo2O4 onto CeO2 enhanced the interaction between the catalyst and toluene, a representative VOC, resulting in significantly increased toluene adsorption without a corresponding increase in specific surface area. This integration also improved the utilization of charge carriers and conversion of ozone to O2-. Under visible light irradiation, H2O accumulated charge carriers at 10%NiCo2O4/CeO2's surface, facilitating both ozone utilization and toluene adsorption. Another benefit of NiCo2O4 loading was its ability to enhance the conversion efficiency of solar energy. Consequently, the toluene removal and mineralization efficiencies of 10%NiCo2O4/CeO2 were enhanced by 182% and 309% compared to CeO2, and by 201% and 357% compared to NiCo2O4, respectively. Overall, this study demonstrated a novel co-catalyst design strategy for enhancing the photo-ozone catalytic degradation of VOCs.

Facile synthesis of silver doped manganese oxide nanocomposite with superior photocatalytic and antimicrobial activity under visible spectrum.

Water pollution and antimicrobial resistance (AMR) have become two global threats; 80% of diseases and 50% of child deaths are due to poor water quality. In this study, hydrothermal processing was employed to manufacture manganese oxide nanorods. Silver dopant was deposited on the surface of manganese oxide. XRD diffractogram confirmed the facile synthesis of Ag/Mn2O3 nanocomposite. XPS survey analysis demonstrated silver content of 9.43 atom %. Photocatalytic measurements demonstrated the outstanding efficiency of the Ag-Mn2O3 compared to virgin oxide particles under visible radiation. Degradation efficiencies Mn2O3 and Ag/Mn2O3 on methyl orange (MO) dye was found to be 53% and 85% under visible spectrum. Silver dopant was found to decrease the binding energy of valence electrons; this action could support electron-hole pair generation under visible spectrum and could promote catalytic performance. Ag/Mn2O3 NPs demonstrated most effective performance (95% removal efficiency) at pH 3; this could be ascribed to the electrostatic attraction between positively charged catalyst and the negatively charged MO. Ag/Mn2O3 demonstrated enhanced antibacterial activity against Gram-positive Staphylococcus aureus (S. aureus) (19 mm ZOI), and Gram-negative Escherichia coli (E. coli) (22 mm ZOI) respectively; the developed nanocomposite demonstrated advanced anti-film activity with inhibition percentage of 95.5% against E. coli followed by 89.5% against S. aureus.

A 2D nanoflower-like ordered mesoporous Bi12ZnO20 catalyst with excellent photocatalytic antibacterial properties.

The ordered mesoporous ZnO was successfully synthesized using the template method in this article, and Bi ions were etched into ZnO to form two-dimensional nanoflower structures of Bi12ZnO20 with NA3SSA as a guiding agent. The crystal structure, morphology, and optical properties of the photocatalyst were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), energy-dispersive spectrometer(EDS), and ultraviolet-visible diffuse reflectance spectrum (UV-vis DRS). Under illumination conditions, the obtained materials exhibited excellent bactericidal ability against both gram-positive and gram-negative bacteria, as well as effective inhibition against fungi. Among them, the bactericidal effect of Pseudomonas aeruginosa was found to be the most rapid, achieving a sterilization rate of 100% within 30 min of light irradiation. Even after three cycles of antibacterial activity testing, the Bi12ZnO20 material still demonstrated good photocatalytic performance. The nanoflower-shaped materials provide an enhanced fluid adsorption capacity and more active centers for photocatalytic reactions while also improving light absorption capacity, photogenerated electron-hole separation efficiency, and electron transport efficiency. The cytotoxicity assessment of Bi12ZnO20 revealed no significant toxic effects. Therefore, this study presents a nanoflower-shaped material with highly efficient photocatalytic antibacterial properties for applications in production and daily life; it holds significant importance in eliminating harmful bacteria and plays a crucial role in environmental protection. IMPORTANCE: The flower-shaped photocatalytic material Bi12ZnO20, consisting of nanoparticles, was successfully synthesized in this study. Rigorous antibacterial experiments were conducted on various fungi using the material, yielding excellent results. Furthermore, the application of this material for antibacterial treatment of livestock and poultry manure sewage in real-life scenarios demonstrated remarkable efficacy.

Recent advances in manipulating strategies of NH2-functionalized metallic organic frameworks-based heterojunction photocatalysts for the sustainable mitigation of various pollutants.

NH2-functionalized metal-organic frameworks (NH2-functionalized MOFs) can abate organic pollutants, predominantly favored by their chemical, mechanical, and thermal stabilities. The present review stated the chemistry of identifying NH2-functionalization and its role in enhancing the properties of bare MOFs. The integration of the amine group bestows several advantages: 1.) enabling band structure modification, 2.) establishing strong metal-NH2 bonds, 3.) preserving MOF structures from reactive oxygen species, and 4.) shielding MOF structures against pH alterations. Consequently, the NH2-functionalized MOFs are promising materials for the photodegradation of organic contaminants. The following section illustrates the two approaches (pre-synthetic and post-synthetic) for NH2-functionalized MOFs. Nevertheless, specific intrinsic limitations, entailing a high recombination rate of charge carriers and inadequate optical adsorption, restrain the applicability of NH2-functionalized MOFs. Accordingly, the succeeding segment presents strategies to elevate the photocatalytic activities of NH2-functionalized MOFs via heterojunction fabrication. The importance of the NH2-functionalized MOFs-based heterojunction has been evaluated in terms of the effect on the enhancement of charge separation, optical adsorption, and redox ability of charge carriers. Subsequently, the potential application for organic pollutant degradation via NH2-functionalized MOFs-based heterojunctions has been scrutinized, wherein the organic pollutants. Eventually, the review concluded with challenges and potential opportunities in engaging and burgeoning domains of the NH2-functionalized MOFs-based heterojunctions.

Photocatalytic Upcycling of Different Types of Plastic Wastes: A Mini Review.

With the escalating demand and utilization of plastics, considerable attention has been given to controlling plastic pollution. Among these methodologies, photocatalytic upcycling of plastic has emerged as a promising method for plastic management due to its energy-saving and eco-friendly properties. In the past several years, great efforts have been devoted to the photocatalytic conversion of a variety of commercial plastic types. These encouraging endeavors foreshadow the continued progression and application in this field. In this review, recent advancements in the photocatalytic upcycling of plastics are reviewed. The fundamentals and principles of photocatalytic deconstruction of plastics are first introduced. Then, we summarize the works on the reforming of different types of plastic, including polyolefins, polyesters, and other types. Finally, some challenges and possible solutions are provided for the development of photocatalytic upcycling of plastics.

Organic Donor-Acceptor-Donor Trimers Nanoparticles Stabilized by Amphiphilic Block Copolymers for Photocatalytic Generation of H2.

Photocatalytic generation of H2 via water splitting emerges as a promising avenue for the next generation of green hydrogen due to its low carbon footprint. Herein, a versatile platform is designed to the preparation of functional π-conjugated organic nanoparticles dispersed in aqueous phase via mini-emulsification. Such particles are composed of donor-acceptor-donor (DAD) trimers prepared via Stille coupling, stabilized by amphiphilic block copolymers synthesized by reversible addition-fragmentation chain transfer polymerization. The hydrophilic segment of the block copolymers will not only provide colloidal stability, but also allow for precise control over the surface functionalization. Photocatalytic tests of the resulting particles for H2 production resulted in promising photocatalytic activity (≈0.6 mmol g-1 h-1). This activity is much enhanced compared to that of DAD trimers dispersed in the water phase without stabilization by the block copolymers.

A critical review of MXene-based composites in the adsorptive and photocatalysis of hexavalent chromium removal from industrial wastewater.

The growing concern of water pollution is a critical issue stemming from industrialization and urbanization. One of the specific concerns within this broader problem is the toxicity associated with chromium (Cr), especially in its Cr (VI) form. Transition metal carbides/nitrides (MXenes) are attractive materials for the treatment of water due to their unique properties such as layered structure, high surface area, conductivity, flexibility, scalable manufacture, and surface functions. Adsorption and photocatalysis reactions are the two promising methods for the removal of Cr (VI) by using MXenes. Still, most of the previous reviews were limited to the single application area. Hence, this review covers recent developments in MXene-based composites, highlighting their dual role as both adsorbents and photocatalysts in the removal of Cr (VI). MXene-based composites are found to be effective in both adsorption and photodegradation of Cr (VI). Most MXene-based composites have demonstrated exceptional removal efficiency for Cr (VI), achieving impressive adsorption capacities ranging from 100 to 1500 mg/g and degradation percentages between 80% and 100% in a relatively short period. The active functional groups present on the surface of MXene have a viable impact on the adsorption and photodegradation performance. The mechanism of Cr (VI) removal is explained, with MXenes playing a key role in electrostatic attraction for adsorption and as co-catalysts in photocatalysis. However, MXene-based composites have limitations such as instability, competition with co-existing ions, and regeneration challenges. Further research is needed to address these limitations. Additionally, MXene-based composites hold promise for addressing water contamination, heavy metal removal, hydrogen production, energy storage, gas sensing, and biomedical applications.

Intermixing of MoS2 and WS2 photocatalysts toward methylene blue photodegradation.

Visible-light-driven photocatalysis using layered materials has garnered increasing attention regarding the degradation of organic dyes. Herein, transition-metal dichalcogenides MoS2 and WS2 prepared by chemical vapor deposition as well as their intermixing are evaluated for photodegradation (PD) of methylene blue under solar simulator irradiation. Our findings revealed that WS2 exhibited the highest PD efficiency of 67.6% and achieved an impressive PD rate constant of 6.1 × 10-3 min-1. Conversely, MoS2 displayed a somewhat lower PD performance of 43.5% but demonstrated remarkable stability. The intriguing result of this study relies on the synergetic effect observed when both MoS2 and WS2 are combined in a ratio of 20% of MoS2 and 80% of WS2. This precise blend resulted in an optimized PD efficiency and exceptional stability reaching 97% upon several cycles. This finding underscores the advantageous outcomes of intermixing WS2 and MoS2, shedding light on the development of an efficient and enduring photocatalyst for visible-light-driven photodegradation of methylene blue.

Synthesis of a Gold-Silver Alloy Nanocluster within a Ring-Shaped Polyoxometalate and Its Photocatalytic Property.

Alloying is an effective method for modulating metal nanoclusters to enrich their structural diversity and physicochemical properties. Recent investigations have demonstrated that polyoxometalates (POMs) can act as effective multidentate ligands for silver (Ag) nanoclusters to endow them with synergistic properties, reactivity, catalytic properties, and stability. However, the application of POMs as ligands has been confined predominantly to monometallic nanoclusters. Herein, we report a synthetic method for fabricating surface-exposed gold (Au)-Ag alloy nanoclusters within a ring-shaped POM ([P8W48O184]40-). Reacting an Ag nanocluster stabilized by the ring-shaped POM with Au ions (Au+) was found to substitute several Ag atoms at the core of the nanocluster with Au atoms. The resultant {Au8Ag26} alloy nanocluster demonstrated superior photocatalytic activity and stability compared to the pristine Ag nanocluster in the aerobic oxidation of α-terpinene under visible-light irradiation. These findings provide fundamental insights into the formation and catalytic properties of POM-stabilized alloy nanoclusters and advance exploration into the synthesis and applications of diverse metal nanoclusters.

Solar Light-Driven Molecular Oxygen Activation by BiOCl Nanosheets: Synergy of Coexposed {001}, {110} Facets and Oxygen Vacancies.

Single-crystalline BiOCl nanosheets with coexposed {001} and {110} facets, as well as oxygen vacancies, were synthesized using a simple method. These nanosheets have the ability to activate molecular oxygen, producing reactive superoxide radicals (77.8%) and singlet oxygen (22.2%) when exposed to solar light. The BiOCl demonstrated excellent photocatalytic efficiency in producing H2O2 under simulated solar light and in oxidatively hydroxylating phenylboronic acid under blue LED light. Our research highlights the significance of constructing coexposed {001} and {110} facets, as well as oxygen vacancies, in enhancing photocatalytic performance. The BiOCl nanosheets have the capability to produce H2O2 with a solar-to-chemical energy conversion efficiency of 0.11%.

Proton-Enriched Alginate-Graphene Hydrogel Microreactor for Enhanced Hydrogen Peroxide Photosynthesis.

Efficient synthesis of H2O2 via photocatalytic oxygen reduction without sacrificial agents is challenging due to inadequate proton supply from water and difficulty in maintaining O-O bond during O2 activation. Herein, we developed a straightforward strategy involving a proton-rich hydrogel cross-linked by metal ions [M(n)], which is designed to facilitate the selective production of H2O2 through proton relay and metal ion-assisted detachment of crucial intermediates. The hydrogel comprises CdS/graphene and alginate cross-linked by metal ions via O=C-O-M(n) bonds. Efficient O2 reduction and hydrogenation occurred, benefitting from the collaboration between proton-rich alginate and the photocatalytically active CdS/graphene. Meanwhile, the O=C-O-M(n) bonds enhance the electron density of α-carbon sites on graphene, crucial for O2 activation and *OOH intermediate detachment, preventing deeper O-O bond cleavage. The role of metal ions in promoting *OOH desorption was evident through Lewis acidity-dependent activity, with Y(III) demonstrating the highest activity followed by Lu(III), La(III), and Ca(II).

Interface-regulated S-type core-shell PCN-224@TiO2 heterojunction for visible-light-driven generation of singlet oxygen for selective photooxidation of 2-chloroethyl ethyl sulfide.

Selective oxidation of sulfur mustard gas (HD) to non-toxic sulfoxide by the visible-light-catalyzed generation of singlet oxygen (1O2) is a promising degradation strategy. Although PCN-224 can absorb visible light, it suffers from rapid electron-hole recombination and low redox capacity, which limits the performance of HD degradation. Titanium dioxide (TiO2) is an excellent photocatalyst but it lacks visible-light-activity in degrading HD. In this study, PCN-224@TiO2 heterojunction with S-type core-shell structure was synthesized by in-situ growth method to prolong the visible light absorption capacity of TiO2 and inhibit the rapid recombination of PCN-224. The interface formation and internal electric field were optimized by adjusting the Zr/Ti ratio to enhance the charge transfer, redox capacity, electron-hole separation, and visible light absorption. In this study, the formation of heterojunction composites based on Zr-O-Ti linkages is demonstrated by a series of characterization methods. It is demonstrated by experiments and theoretical calculations that PCN-224@TiO2 can generate nearly 100 % 1O2 under visible light conditions without a sacrificial agent, resulting in efficient and selective oxidation of 2-chloroethyl ethyl sulfide (CEES), a simulant of HD, to non-toxic sulfoxide form.

Covalent Organic Framework Catalyzed Amide Synthesis Directly from Alcohol Under Red Light Excitation.

The dehydrogenative coupling of alcohols and amines to form amide bonds is typically catalysed by homogeneous transition metal catalysts at high temperatures ranging from 130-140 °C. In our pursuit of an efficient and recyclable photocatalyst capable of conducting this transformation at room temperature, we report herein a COF-mediated dehydrogenative synthesis. The TTT-DHTD COF was strategically designed to incorporate a high density of functional units, specifically dithiophenedione, to trap photogenerated electrons and effectively facilitate hydrogen atom abstraction reactions. The photoactive TTT-DHTD COF, synthesized using solvothermal methods showed high crystallinity and moderate surface area, providing an ideal platform for heterogeneous amide synthesis.  Light absorption by the COF across the entire visible range, narrow band gap, and valence band position make it well-suited for the efficient generation of excitons necessary for targeted dehydrogenation. Utilizing red light irradiation and employing extremely low loading of the COF, we have successfully prepared a wide range of amides, including challenging secondary amides, in good to excellent yields. The substrate's functional group tolerance, very mild reaction conditions, and the catalyst's significant recyclability represent substantial advancements over prior methodologies.

Unveiling Competitive Adsorption in TiO2 Photocatalysis through Machine-Learning-Accelerated Molecular Dynamics, DFT, and Experimental Methods.

The efficient harnessing of solar power for water treatment via photocatalytic processes has long been constrained by the challenge of understanding and optimizing the interactions at the photocatalyst surface, particularly in the presence of nontarget cosolutes. The adsorption of these cosolutes, such as natural organic matter, onto photocatalysts can inhibit the degradation of pollutants, drastically decreasing the photocatalytic efficiency. In the present work, computational methods are employed to predict the inhibitory action of a suite of small organic molecules during TiO2 photocatalytic degradation of para-chlorobenzoic acid (pCBA). Specifically, tryptophan, coniferyl alcohol, succinic acid, gallic acid, and trimesic acid were selected as interfering agents against pCBA to observe the resulting competitive reaction kinetics via bulk and surface phase reactions according to Langmuir-Hinshelwood adsorption dynamics. Experiments revealed that trimesic and gallic acids were most competitive with pCBA, followed by succinic acid. Density functional theory (DFT) and machine learning interatomic potentials (MLIPs) were used to investigate the molecular basis of these interactions. The computational findings showed that while the type of functional group did not directly predict adsorption affinity, the spatial arrangement and electronic interactions of these groups significantly influenced adsorption dynamics and corresponding inhibitory behavior. Notably, MLIPs, derived by fine-tuning models pretrained on a vastly larger dataset, enabled the exploration of adsorption behaviors over substantially longer periods than typically possible with conventional ab initio molecular dynamics, enhancing the depth of understanding of the dynamic interaction processes. Our study thus provides a pivotal foundation for advancing photocatalytic technology in environmental applications by demonstrating the critical role of molecular-level interactions in shaping photocatalytic outcomes.