Portable self-powered electrochemical aptasensor for ultrasensitive and real-time detection of microcystin-RR based on hydrovoltaic-photothermal coupling effect.

Coupling different energy harvesting technologies to obtain an excellent output signal is essential for the development of high-performance self-powered electrochemical sensors. Herein, a novel hydrovoltaic-photothermal coupling self-powered electrochemical aptasensing platform was designed for sensitive detection of microcystin (MC-RR) with a digital multimeter as a direct visual readout strategy. The straightforward ultrasonic method was employed to synthesize polyaniline (PANI) and bismuth oxybromide (BiOBr) nanosheets, which were then integrated as active components in a hydrovoltaic device. The unique layer structure of two-dimensional (2D) nanomaterials BiOBr can create flexible interlayer spaces to accommodate various ions and water molecules, which was beneficial to construct evaporation-driven channels. Meanwhile, the exceptional photothermal characteristics of polyaniline could accelerate the water evaporation rate, consequently boosting the migration speed of charge carriers and increasing output signal. Moreover, a digital multimeter was connected to the constructed sensor for real-time displaying the output signal. With the assistance of aptamer, a novel self-powered electrochemical aptasensing platform was constructed for sensitive detection of MC-RR. Under optimum conditions, the output signal of the hydrovoltaic-photothermal coupling cell was linearly related to the logarithm of MC-RR concentration in the range of 1 fM to 1 nM with a detection limit of 0.31 fM (S/N = 3). Furthermore, this sensor also exhibited many advantages such as high selectivity, good repeatability and portability. Such novel strategy not only offers a completely new general approach to construct high-performance self-powered devices for the detection of MC-RR, but also provides a new strategy for advancing the miniaturization and field application of self-powered electrochemical sensors.

A Signal Amplitude-Insensitive Triboelectric Touch Panel with a Significantly Reduced Signal Channel and Deep-Learning-Enhanced Robustness.

The self-powered triboelectric touch panel has garnered considerable research attention due to its potential to reduce system energy consumption and its applications in human-machine interfaces, e-skin, and the Internet of Things. Current methods for achieving triboelectric-based touch positioning in an M × N detection pixel array typically require signal amplitude comparison across at least M + N signal channels, thereby limiting lightweight design possibilities. In contrast, our novel "resistor ladder" approach necessitates only 4 signal channels for touch positioning. This method leverages a lookup table correlating touch positions with amplitude ratios from different channels, rendering it insensitive to signal amplitude and significantly enhancing robustness. We fabricated a transparent touch panel using PET tribomaterial, where the surface roughness was enhanced through plasma treatment. The panel successfully demonstrated touch positioning for 128 taps within a 4 × 4 pixel detection array and sliding positioning using a predefined lookup table. To further enhance device robustness, a 2D convolutional neural network was implemented, which achieved an impressive touch positioning accuracy of 97.7% even under artificially introduced signal defects. This study represents an initial exploration of amplitude-insensitive touch and sliding positioning methods, significantly reducing the number of required signal channels and enhancing the robustness of triboelectric touch panels.

Triboelectric Nanogenerator for Self-Powered Gas Sensing.

With the continuous acceleration of industrialization, gas sensors are evolving to become portable, wearable and environmentally friendly. However, traditional gas sensors rely on external power supply, which severely limits their applications in various industries. As an innovative and environmentally adaptable power generation technology, triboelectric nanogenerators (TENGs) can be integrated with gas sensors to leverage the benefits of both technologies for efficient and environmentally friendly self-powered gas sensing. This paper delves into the basic principles and current research frontiers of the TENG-based self-powered gas sensor, focusing particularly on innovative applications in environmental safety monitoring, healthcare, as well as emerging fields such as food safety assurance and smart agriculture. It emphasizes the significant advantages of TENG-based self-powered gas sensor systems in promoting environmental sustainability, achieving efficient sensing at room temperature, and driving technological innovations in wearable devices. It also objectively analyzes the technical challenges, including issues related to performance enhancement, theoretical refinement, and application expansion, and provides targeted strategies and future research directions aimed at paving the way for continuous progress and widespread applications in the field of self-powered gas sensors.

Role of Piezoelectricity in Disease Diagnosis and Treatment: A Review.

Because of their unique electromechanical coupling response, piezoelectric smart biomaterials demonstrated distinctive capability toward effective, efficient, and quick diagnosis and treatment of a wide range of diseases. Such materials have potentiality to be utilized as wireless therapeutic methods with ultrasonic stimulation, which can be used as self-powered biomedical devices. An emerging advancement in the realm of personalized healthcare involves the utilization of piezoelectric biosensors for a range of therapeutic diagnosis such as diverse physiological signals in the human body, viruses, pathogens, and diseases like neurodegenerative ones, cancer, etc. The combination of piezoelectric nanoparticles with ultrasound has been established as a promising approach in sonodynamic therapy and piezocatalytic therapeutics and provides appealing alternatives for noninvasive treatments for cancer, chronic wounds, neurological diseases, etc. Innovations in implantable medical devices (IMDs), such as implantable piezoelectric energy generator (iPEG), offer significant advantages in improving physiological functioning and ability to power a cardiac pacemaker and restore the heart function. This comprehensive review critically evaluates the role of piezoelectricity in disease diagnosis and treatment, highlighting the implication of piezoelectric smart biomaterials for biomedical devices. It also discusses the potential of piezoelectric materials in healthcare monitoring, tissue engineering, and other medical applications while emphasizing future trends and challenges in the field.

Comprehensive Insights on MXene-Based TENGs: from Structures, Functions to Applications.

The rapid advancement of triboelectric nanogenerators (TENGs) has introduced a transformative approach to energy harvesting and self-powered sensing in recent years. Nonetheless, the untapped potential of TENGs in practical scenarios necessitates multiple strategies like material selections and structure designs to enhance their output performance. Given the various superior properties, MXenes, a kind of novel 2D materials, have demonstrated great promise in enhancing TENG functionality. Here, this review comprehensively delineates the advantages of incorporating MXenes into TENGs, majoring in six pivotal aspects. First, an overview of TENGs is provided, stating their theoretical foundations, working modes, material considerations, and prevailing challenges. Additionally, the structural characteristics, fabrication methodologies, and family of MXenes, charting their developmental trajectory are highlighted. The selection of MXenes as various functional layers (negative and positive triboelectric layer, electrode layer) while designing TENGs is briefed. Furthermore, the distinctive advantages of MXene-based TENGs and their applications are emphasized. Last, the existing challenges are highlighted, and the future developing directions of MXene-based TENGs are forecasted.

Reversibly Compressible Silanated Cellulose Nanofibril Aerogel for Triboelectric Taekwondo Scoring Sensors.

The integration of bio-based materials into triboelectric nanogenerators (TENGs) for energy harvesting from human body motions has sparked considerable research attention. Here, a silanated cellulose nanofibril (SCNF) aerogel is reported for structurally reliable TENGs and reversely compressible Taekwondo scoring sensors under repeated impacts. The preparation of the aerogel involves silanizing cellulose nanofibers (CNFs) with vinyltrimethoxysilane (VTMS), following by freeze-drying and post-heating treatment. The SCNF aerogel with crosslinked physico-chemical bonding and highly porous network is found to exhibit superior mechanical strength and reversible compressibility as well as enhanced water repellency and electron-donating ability. The TENG having a tribo-positive SCNF layer exhibits exceptional triboelectric performances, generating a voltage of 270 V, current of 11 µA, and power density of 401.1 mW m-2 under an applied force of 8 N at a frequency of 5 Hz. With its inherent merits in material composition, structural configuration, and device sensitivity, the SCNF TENG demonstrates the capability to seamlessly integrate into a Taekwondo protection gear, serving as an efficient self-powered sensor for monitoring hitting scores. This study highlights the significant potential of a facilely fabricated SCNF aerogel for the development of high-performance, bio-friendly, and cost-effective Bio-TENGs, enabling their application as self-powered wearable devices and sports engineering sensors.

A Highly Robust, Multifunctional, and Breathable Bicomponent Fibers Thermoelectric Fabric for Dual-Mode Sensing.

Wearable thermoelectric (TE) materials are seen as excellent candidates for flexible electronics because of their unique self-powered properties, multistimulus sensing and human waste heat conversion. However, currently reported flexible TE materials still face challenges such as poor durability, uncomfortable wearing and sensing signals crosstalking each other. Herein, this study describes a hot-air cross-linking method for the preparation of multifunctional TE fabrics with enhanced durability. Poly(ethylene terephthalate) (PET) fibers with core and sheath structures having different melting points were selected as flexible substrates. Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and single-walled carbon nanotubes (SWCNTs) were embedded stably on the surface of the sheath layer in the presence of heat treatment. The fiber-welded structure created by thermal cross-linking improves the durability of TE fabrics, including consistent mechanical and electrical properties after a 6 h wash test and 6000 compression cycles. The unique fiber structure of TE fabrics ensures excellent breathability (313.7 mm s-1 at 200 Pa), which meets the breathability requirements for human wear. In addition, the fiber-prepared sensors have excellent compressive strain response (20 ms response time and 30 ms recovery time) and precise temperature discrimination (0.17 K minimum discrimination temperature) for accurate real-time monitoring of the sensed signals. Thus, the TE fabrics can be used for human motion recognition, including pulse monitoring, sign language expression, and motions in joint areas. Moreover, the fabricated wearable TE device is connected to a Bluetooth module for wireless transmission, which can be used for mechanical and temperature sensing of the robot arm without signals crosstalking. This new durable TE fabric paves the way for the next generation of smart wearable technology.

Signal amplification strategy based on target-controlled release of mediator for ultrasensitive self-powered biosensing of acetamiprid.

Self-powered biosensors with high sensitivity have garnered significant interest for their potential applications in the realm of portable sensing. Herein, a self-powered biosensor with a novel signal amplification strategy was developed by integrating target-controlled release of mediator with an enzyme biofuel cell for the ultrasensitive detection of acetamiprid (ACE). Zeolitic imidazolate framework-67 was utilized as both a nanocontainer for capturing the electron mediator 2,2'-azidobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and a precursor for the synthesis of cobalt nanoparticles/nitrogen, sulfur-codoped carbon nanotubes (Co NPs/NS-CNTs), which were employed as the electrode material for constructing both the glucose oxidase-based bioanode and the laccase-based biocathode. The target analyte ACE can specifically bind to its aptamer, leading to the release of ABTS, which cyclically participates in the catalytic reaction of the biocathode, thereby amplifying the electrochemical signal. By leveraging the benefits of ABTS cyclic catalysis and the effective electrocatalysis of bioelectrodes based on Co NPs/NS-CNTs, the self-powered biosensor has a broad detection range of 0.1-1000 fM and a low detection limit of 25 aM toward ACE. The proposed signal amplification approach presents a promising strategy for enhancing sensitivity and enabling portable analysis in applications of food safety, environmental monitoring, and medical diagnostics.

Enhancement of photovoltaic parameters of thermally stable graphene/LaVO3semitransparent solar cell by employing interfacial graphene quantum dots.

Semitransparent solar cells are attracting attention not only for their visual effects but also for their ability to effectively utilize solar energy. Here, we demonstrate a translucent solar cell composed of bis(trifluoromethane sulfonyl)-amide (TFSA)-doped graphene (Gr), graphene quantum dots (GQDs), and LaVO3. By introducing a GQDs intermediate layer at the TFSA-Gr/LaVO3interface, we can improve efficiency by preventing carrier recombination and promoting charge collection/separation in the device. As a result, the efficiency of the GQDs-based solar cell was 4.35%, which was higher than the 3.52% of the device without GQDs. Furthermore, the average visible transmittance of the device is 28%, making it suitable for translucent solar cells. The Al reflective mirror-based system improved the power conversion efficiency by approximately 7% compared to a device without a mirror. Additionally, the thermal stability of the device remains at 90% even after 2000 h under an environment with a temperature of 60 °C and 40% relative humidity. These results suggest that TFSA-Gr/GQDs/LaVO3-based cells have a high potential for practical use as a next-generation translucent solar energy power source.

Tactile Sensing and Rendering Patch with Dynamic and Static Sensing and Haptic Feedback for Immersive Communication.

Wearable human-machine interface (HMI) with bidirectional and multimodal tactile information exchange is of paramount importance in teleoperation by providing more intuitive data interpretation and delivery of tactilely related signals. However, the current sensing and feedback devices still lack enough integration and modalities. Here, we present a Tactile Sensing and Rendering Patch (TSRP) that is made of a customized expandable array which consists of a piezoelectric sensing and feedback unit fused with an elastomeric triboelectric multidimensional sensor and its inner pneumatic feedback structure. The primary functional unit of TSRP is mainly featured with a soft silicone substrate with compact multilayer structure integrating static and dynamic multidimensional tactile sensing capabilities, which synergistically leverage both triboelectric and piezoelectric effects. Additionally, based on the air chamber created by the triboelectric sensor and the converse piezoelectric effect, it provides pneumatic and vibrational haptic feedback simultaneously for both static and dynamic perception regeneration. With the aid of the other variants of this unit, the array shaped TSRP is capable of simulating different terrains, geometries, sliding, collisions, and other critical interactive events during teleoperation via skin perception. Moreover, immediate manipulation can be done on TSRP through the tactile sensors. The preliminary demonstration of TSRP interface with a completed control module in robotic teleoperation is provided, which shows the feasibility of assisting certain tasks in a complex environment by direct tactile communication. The proposed device offers a potential method of enabling bidirectional tactile communication with enriched key information for improving interaction efficiency in the fields of robot teleoperation and training.

Performance Enhancement of Self-Powered Electrochromic Device via a PEDOT:PSS Electrode Inherited with Intrinsic Roughness of Substrate.

The electrode optimization and rational design are of great significance for the performance enhancement of self-powered electrochromic devices (ECDs). It can be effectively enhanced by developing interfacial properties of electrodes, which can promote the internal ion transport within functional components consisting of an electrode, electrochromic layer, and electrolyte layer and thus obtain performance improvement of fabricated devices. This work aims to construct the electrode of poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) on different substrates and promote interface performance of the prepared electrodes via inheriting the surface topography of substrates. Besides, the prepared PEDOT:PSS electrodes as a dual-function layer including the electrochromic and electrode layer are employed to assemble the ECDs. It is found that the intrinsic roughness of the paper substrate can facilitate the electrochemical performance of the prepared PEDOT:PSS electrode on it effectively, thereby showing a superior electrochemical surface area and diffusion coefficient as well as a lower charge-transfer resistance of 13.56 Ω. Similarly, for the prepared self-powered ECD on the paper substrate, it also indicates a high light absorption property (0.413), well-defined electrochromic contrast (33.09), fast switching (τc = 4.0 s, τb = 6.8 s), high coloration efficiency (92.275 cm2 C-1), high areal capacity (10.93 mAh m-2) at 0.01 mA cm-2, and lower equivalent series resistance (176.2 Ω) in comparison to parallel ECDs on the PET and glass substrate. Leveraging the intrinsic roughness of the substrate is able to enhance the electrochemical performance of electrodes, which can also provide a new strategy for the construction of high-performance self-powered ECDs.

Multifunctional Self-Powered Sensors Integrated on a Robot Hand for Detecting Temperature-Pressure Stimuli and Recognizing Objects.

Tactile sensing, especially pressure and temperature recognition, is crucial for both humans and robots in identifying objects. The general solutions, which use piezoresistive, capacitive, and thermal resistance effects, are usually subject to single-mode sensing and an energy supply. Here, we propose a multimode self-powered sensor. The sensor can respond to pressure and temperature stimuli using triboelectric and thermoelectric effects. Furthermore, we developed a sensing system comprising sensors, a deep learning block, and a smart board. The deep learning model can fuse features of triboelectric and thermoelectric signals, enabling a high accuracy of 99.8% in recognizing ten objects. This method may provide the future design of self-powered sensors for object recognition in robotics.

Flexible Fiber Shaped Self-Powered System Based on Conductive PANI for Signal Sensing and Energy Harvesting.

As science and technology advance, people are increasingly inclined to use sustainable and portable wearable electronic devices. The traditional supporting power source, batteries, suffers from issues of flexibility and lifespan, severely constraining the development of wearable devices. Alternatively, the self-powered system, serving as a power source, can effectively collect energy from the surrounding environment, achieving maintenance-free operation and high adaptability, which has attracted widespread research. The coaxial fiber-structured self-powering system proposed in this study is based on a supercapacitor (SC) and a triboelectric nanogenerator (TENG). The carbon fiber (CF) has polyaniline (PANI) and rGO connected to it, and a friction layer of silicone rubber is wrapped around the outside. The conductivity of the fiber was increased by multiple PANI graftings, and a coaxial fiber-type TENG with a 2 mm diameter was created. Following weaving, the TENG displays a high power density of 576 mW m-2 and an open-circuit voltage of 160 V and a short-circuit current of 9 µA. In addition, the flexible fiber-shaped supercapacitor uses NiAl-LDHs@CF as the negative electrode and AC@CF as the positive electrode, showing a specific capacitance of up to 281.4 mF cm-2. Furthermore, the SC and TENG are assembled into a coaxial self-power supply system, which has excellent performance and shows extensive potential applications in the field of wearable device power supply.

Laser-induced CdS/TiO2/graphene dual photoanodes for ratiometric self-powered photoelectrochemical sensor: an innovative approach for aflatoxin B1 detection.

A ratiometric self-powered photoelectrochemical sensor based on laser direct writing technology was constructed to address the problem that the conventional single-signal detection mode was susceptible to the influence of instrumentation and environmental factors, which interfered with the detection results. Laser-induced CdS/TiO2/Graphene was prepared as dual photoanodes (PA1 and PA2), which were controlled by multiplexed switches to form a photocatalytic fuel cell with Pt cathode. By modifying the aptamer of aflatoxin B1 (AFB1) on the photoanode surface, the target was specifically captured to the electrode surface to form a biological complex, which increased the steric hindrance and affected the electron transfer, thus reducing the output signal of the sensor. Targets with different concentrations were incubated on the surface of PA1, and targets with fixed concentrations were incubated on the surface of PA2. Under the control of the multiplex switch, the output signals of the two photoanodes were recorded, and the ratio of these two signals was used as the basis for the quantitative detection of AFB1. The sensor output was linearly increasing with the logarithm of AFB1 concentration from 1.0 to 150 ng mL-1 and the detection limit was 0.0974 ng mL-1. Additionally, this method had good stability, fast response, and good selectivity to real samples, providing an effective method for food safety monitoring.

Advances in Graphene-Based Electrode for Triboelectric Nanogenerator.

With the continuous development of wearable electronics, wireless sensor networks and other micro-electronic devices, there is an increasingly urgent need for miniature, flexible and efficient nanopower generation technology. Triboelectric nanogenerator (TENG) technology can convert small mechanical energy into electricity, which is expected to address this problem. As the core component of TENG, the choice of electrode materials significantly affects its performance. Traditional metal electrode materials often suffer from problems such as durability, which limits the further application of TENG. Graphene, as a novel electrode material, shows excellent prospects for application in TENG owing to its unique structure and excellent electrical properties. This review systematically summarizes the recent research progress and application prospects of TENGs based on graphene electrodes. Various precision processing methods of graphene electrodes are introduced, and the applications of graphene electrode-based TENGs in various scenarios as well as the enhancement of graphene electrodes for TENG performance are discussed. In addition, the future development of graphene electrode-based TENGs is also prospectively discussed, aiming to promote the continuous advancement of graphene electrode-based TENGs.

3D DNAzyme Motor Nanodevice With Self-Powered FRET Amplifier and Self-Supplied H2O2 for Enhancing Human Neutrophil Elastase Profiling and Chemodynamic Therapy in Lung Tumor.

The development of theragnostic nanosystems integrating FRET (fluorescence resonance energy transfer) imaging and chemodynamic therapy (CDT) for accurate diagnosis and effective treatment of lung tumors is still a big challenge. Herein, a peptide-assembled 3D DNAzyme motor nanodevice is engineered for a self-powered FRET amplifier profiling human neutrophil elastase (HNE) and self-supplied H2O2 enhancing CDT. The nanodevice is prepared by depositing AuNPs on ZIF-8, in which ZIF-8 co-loaded the lysosomal targeting peptide-modified copper peroxides (PCPs) and hairpins (H1, H2, and H3), AuNPs are co-labeled by DNAzyme-peptide (DP) conjugate and H3. In the tumor micro-environment, HNE driven 3D DNAzyme walker followed by an exponential amplification constructed by a synergistic cross-activation between hybridization chain reaction and DNAzyme, generating a self-powered FRET amplifier. The FRET amplifier specifically measures HNE with a sensitivity of 0.026 pM, and successfully images exogenous HNE in living cells and monitors HNE in mouse models. Moreover, the PCPs can target lysosomes, reducing lysosome escape. The self-supplying H2O2 undertaken by PCPs improves the Cu (II)-catalyzed Fenton-like reaction, effectively causing cell apoptosis to inhibit tumor growth. Significantly, the nanodevice successfully screens inhibitors and discriminates the HNE level in normal and lung cancer tissues, suggesting that the nanodevice provides an effective tool for the diagnosis and treatment of lung tumors.

A self-powered photoelectrochemical aptasensor using 3D-carbon nitride and carbon-based metal-organic frameworks for high-sensitivity detection of tetracycline in milk and water.

Antibiotic residues have become a significant challenge in food safety, threatening both ecosystem integrity and human health. To combat this problem, we developed an innovative photo-powered, self-powered aptasensor that employs a novel carbon-doped three-dimensional graphitic carbon nitride (3D-CN) combined with a metal-organic framework composed of N-doped copper(I) oxide-carbon (Cu2O@C) skeletons. The 3D-CN serves as the photoanode, offering stable photocurrent production due to its three-dimensional open framework structure. The N-doped Cu2O@C acts as the photocathode, providing oxidation protection for the metal core and enhancing light absorption due to its metal-organic framework structure. A key feature of our work is exploiting the Fermi level difference between the n-type photoanode and p-type photocathode, which facilitates faster migration of photogenerated electrons toward the photocathode, thereby enhancing the sensor's self-powered effect. Experimental results reveal that upon aptamer loading, the sensor can linearly detect tetracycline (TC) within a range of 0.5 pmol/L to 300 nmol/L, with a detection limit as low as 0.13 pmol/L. It also demonstrates excellent selectivity, stability, and reproducibility, making it applicable to real samples such as milk and river water. Consequently, our research provides a highly efficient and sensitive method for monitoring TC in food, with significant practical implications and profound impacts on food safety.

Ionic Hydrogel-Based Moisture Electric Generators for Underwater Electronics.

Ubiquitous moisture is of particular interest for sustainable power generation and self-powered electronics. However, current moisture electric generators (MEGs) can only harvest moisture energy in the air, which tremendously limits the energy harvesting efficiency and practical application scenarios. Herein, the operationality of MEG from air to underwater environment, through a sandwiched engineered-hydrogel device with an additional waterproof breathable membrane layer allowing water vapor exchange while preventing liquid water penetration, is expanded. Underwater environment, the device can spontaneously deliver a voltage of 0.55 V and a current density of 130 µA cm-2 due to the efficient ion separation assisted by negative ions confinement in hydrogel networks. The output can be maintained even under harsh underwater environment with 10% salt concentration, 1 m s-1 disturbing flow, as well as >40 kPa hydraulic pressure. The engineered hydrogel used for MEG also exhibits excellent self-healing ability, flexibility, and biocompatibility. As the first demonstration of practical applications in self-powered underwater electronics, the MEG device is successfully powering a wireless emitter for remote communication in water. This new type of MEG offers an innovative route for harvesting moisture energy underwater and holds promise in the creation of a new range of innovative electronic devices for marine Internet-of-Things.

Environmentally stable, adhesive, self-healing, stretchable and transparent gelatin based eutectogels for self-powered humidity sensors.

Intrinsic environmental and stability limitations of hydrogels have inhibited their practical applications as a flexible wearable device due to water evaporation or freezing in complex environments such as low temperatures and arid environments. In this work, a multifunctional gelatin based ionic conductive eutectogel with double network structure is designed via ternary deep eutectic solvent (DES) (acrylic acid (AA), choline chloride (ChCl) and ethylene glycol (EG)). In this system, the introduction of ethylene glycol (EG) can be used to dissolve gelatin. The resulting DESG eutectogel exhibited excellent adhesion, mechanical robustness, anti-freeze, anti-drying, and self-healing. Interestingly, the DESG gels showed high humidity sensitivity in a wide humidity detection range (11 %-83 %), which can be assembled as a self-powdered humidity sensor to monitor human mouth and nose breathing. This work is expected to bring new prospect to construct high performance humidity sensors using gelatin based humidity-responsive materials for a wide range of potential applications in respiratory diagnostics, sleep monitoring, electronic skin and wearable electronics.

Current Research Status and Future Trends of Vibration Energy Harvesters.

The continuous worsening of the natural surroundings requires accelerating the exploration of green energy technology. Utilising ambient vibration to power electronic equipment constitutes an important measure to address the power crisis. Vibration power is widely dispersed in the surroundings, such as mechanical vibration, acoustic vibration, wind vibration, and water wave vibration. Collecting vibration energy is one of the research hotspots in the field of energy. Meanwhile, it is also an important way to solve the energy crisis. This paper illustrates the working principles and recent research progress of five known methods of vibrational energy harvesting, namely, electromagnetic, piezoelectric, friction electric, electrostatic, and magnetostrictive vibrational energy harvesters. The strengths and weaknesses of each method are summarised. At the end of the article, the future trends of micro-nano vibrational energy collectors are envisioned.