Enhancing sludge thickening in continuous treatment using polymeric bubbles with cationic polymer P2900 and cocamidopropyl betaine.

Sludge thickening is a fundamental stage of treatment. This study investigated the application, in continuous treatment, of polymeric bubbles produced with cationic polymer P2900 and cocamidopropyl betaine (CAPB), a zwitterionic surfactant. The proposed reagent combination aims to form aerated flakes, solid waste structures, and rapidly rising air bubbles, ideal for treatments in compact units. Using this combination, it was possible to achieve a total solids concentration of 45% with the modified bubbles and 25% with the conventional water treatment. This level of thickening occurred under the following operating conditions: initial total solids (TS) concentration of 10 g L-1, a flow rate of 5 L min-1, saturation pressure (psat) of 3 atm, and polymer dosage of 10 mg (gTS)-1. The suggested mechanism of action involves the adhesion of P2900 molecules to CAPB at the air/water interface, forming a lining on the bubble surface. Additionally, polymerized species form due to the residual aluminum (Al) in the sludge, which would occur during flocculation in the helical tubular flocculator (HTF), adsorbing the micelles and bubbles of CAPB. The critical micellar concentration (CMC) of CAPB was 0.26 mmol L-1. Polymeric bubble technology can provide an efficient and cost-effective approach to sludge thickening in continuous treatment.

A Natural deep eutectic solvent as an effective material for dual debridement and antibiofilm effects in chronic wound treatment.

In chronic wound treatment, the debridement of devitalized tissue and the eradication of the biofilm must balance aggressiveness with care to protect regenerating tissues. In this study, urea, a potent chaotropic molecule, was modulated through the formation of a Natural Deep Eutectic Solvent (NADES) with betaine to develop a new debriding material (BU) suitable for application into injured dermal tissues. To evaluate BU's debriding capacity, along with its antibiofilm effect and biocompatibility, pre-clinical to clinical methods were employed. In vitro determinations using artificial and clinical slough samples indicate that BU has a high debriding capacity. Additionally, BU's de-structuring effects lead to a strong antibiofilm capability, demonstrated by a reduced bacterial load compared to the antiseptic PHMB-Betaine or medical honey, evaluated in artificial slough and ex vivo human skin. Furthermore, BU's efficacy was evaluated in a murine model of diabetic wound, demonstrating significant effects on debriding and antibiofilm capacity, similar to those observed in PHMB-Betaine and medical honey-treated animals. Finally, BU was clinically evaluated in leg ulcers, showing superiority in reduction of bacterial load and wound area compared to honey, with no adverse effects. Thus, BU represents a simple and non-biocidal option that could contributes to chronic wound care.

Influence of Surfactants and Fluoride against Enamel Erosion.

This study investigated the effect of surfactants associated with sodium fluoride (NaF) on enamel erosion prevention, using an erosion-remineralization in vitro model. Sodium lauryl sulfate (SLS), polysorbate 20 (P20), and cocoamidopropyl betaine (CAPB) were tested, at concentrations of 1.0 and 1.5%, and associated or not with NaF (275 ppm). The control groups were distilled water and the NaF solution. Bovine enamel samples (n = 12) were prepared and submitted to a 5-day cycling model: acid challenge (0.3% citric acid, pH 2.6, 4×/day), human saliva (2 h, 4×/day), and the treatment solutions (2 min, 2×/day). The protective potential of the agents against initial erosion was assessed by microhardness and the surface loss by profilometry. Enamel surface wettability was determined by goniometry, protein adsorption was measured by spectroscopy (FTIR), and the KOH-soluble fluoride was quantified. Goniometry showed that SLS and CAPB increased enamel wettability. No differences were found among the surfactants regarding protein adsorption. Microhardness showed that SLS reduced NaF protection. P20 (1 and 1.5%) and CAPB 1.5% presented a protective effect, but lower than the NaF solution. Profilometry showed that CAPB protected enamel, but no agent associated with NaF promoted a higher protection than the NaF solution alone. KOH-soluble fluoride analysis showed that all surfactants reduced the fluoride adsorption on the enamel surface. Therefore, the surfactants tested (except for P20) changed the enamel surface energy. The SLS decreased the protective potential of NaF on initial erosion, but no tested agent interfered with the protective effect of NaF on enamel erosive wear.

A Natural Deep Eutectic Solvent Formulated to Stabilize ß-Lactam Antibiotics.

ß-lactam antibiotics, such as penicillin share a very unstable chemical structure. In water-based solutions, such as those used for clinical applications, the ß-lactam ring is readily opened due to a nucleophilic or electrophilic attack, leading to the loss of antimicrobial activity. Since the achievement and maintenance of optimum therapeutic levels of ß-lactam antibiotics is critical for the resolution of many infectious clinical situations, and to avoid antibiotic resistance generation, the design of new non-aqueous dosage forms is urgent. Recently, natural deep eutectic solvents (NADES) have emerged as alternative non-toxic and non-aqueous solvents for different biomedical applications. In this work, we formulated and characterized a NADES composed by betaine and urea (BU). Using this solvent, we evaluated the stability of clavulanic acid (CLV) and imipenem (IMP) and characterized their antimicrobial activities calculating the minimal inhibitory concentration. Characterization of BU solvent by infrared spectroscopy (IR) and nuclear magnetic resonance spectroscopy (NMR) indicated that the obtained solvent has a microstructure mainly based on hydrogen bonding interactions and water addition strongly affects its dynamic. The stability of ß-lactam antibiotic IMP and CLV using this solvent was increased by 7 fold and 2.5 fold respectively compared to water when analysed seven days after being dissolved. Microbiological assays showed that antibacterial activity at day seven was significantly decreased for both CLV and IMP when dissolved in water, while no change in their antibacterial properties was observed when antibiotics were dissolved in BU. The increased stability of IMP and CLV in BU may be related to the inert behaviour of the solvent and the higher dynamic restriction that helps antibiotics to maintain a more stable conformation. These data suggest the potential use of BU as a solvent to prevent degradation of ß-lactam antibiotics.

Reversible, partial inactivation of plant betaine aldehyde dehydrogenase by betaine aldehyde: mechanism and possible physiological implications.

In plants, the last step in the biosynthesis of the osmoprotectant glycine betaine (GB) is the NAD(+)-dependent oxidation of betaine aldehyde (BAL) catalysed by some aldehyde dehydrogenase (ALDH) 10 enzymes that exhibit betaine aldehyde dehydrogenase (BADH) activity. Given the irreversibility of the reaction, the short-term regulation of these enzymes is of great physiological relevance to avoid adverse decreases in the NAD(+):NADH ratio. In the present study, we report that the Spinacia oleracea BADH (SoBADH) is reversibly and partially inactivated by BAL in the absence of NAD(+)in a time- and concentration-dependent mode. Crystallographic evidence indicates that the non-essential Cys(450)(SoBADH numbering) forms a thiohemiacetal with BAL, totally blocking the productive binding of the aldehyde. It is of interest that, in contrast to Cys(450), the catalytic cysteine (Cys(291)) did not react with BAL in the absence of NAD(+) The trimethylammonium group of BAL binds in the same position in the inactivating or productive modes. Accordingly, BAL does not inactivate the C(450)SSoBADH mutant and the degree of inactivation of the A(441)I and A(441)C mutants corresponds to their very different abilities to bind the trimethylammonium group. Cys(450)and the neighbouring residues that participate in stabilizing the thiohemiacetal are strictly conserved in plant ALDH10 enzymes with proven or predicted BADH activity, suggesting that inactivation by BAL is their common feature. Under osmotic stress conditions, this novel partial and reversible covalent regulatory mechanism may contribute to preventing NAD(+)exhaustion, while still permitting the synthesis of high amounts of GB and avoiding the accumulation of the toxic BAL.

Differential antigenic protein recovery from Taenia solium cyst tissues using several detergents.

Human and porcine cysticercosis is caused by the larval stage of the flatworm Taenia solium (Cestoda). The protein extracts of T. solium cysts are complex mixtures including cyst's and host proteins. Little is known about the influence of using different detergents in the efficiency of solubilization-extraction of these proteins, including relevant antigens. Here, we describe the use of CHAPS, ASB-14 and Triton X-100, alone or in combination in the extraction buffers, as a strategy to notably increase the recovery of proteins that are usually left aside in insoluble fractions of cysts. Using buffer with CHAPS alone, 315 protein spots were detected through 2D-PAGE. A total of 255 and 258 spots were detected using buffers with Triton X-100 or ASB-14, respectively. More protein spots were detected when detergents were combined, i.e., 2% CHAPS, 1% Triton X-100 and 1% ASB-14 allowed detection of up to 368 spots. Our results indicated that insoluble fractions of T. solium cysts were rich in antigens, including several glycoproteins that were sensitive to metaperiodate treatment. Host proteins, a common component in protein extracts of cysts, were present in larger amounts in soluble than insoluble fractions of cysts proteins. Finally, antigens present in the insoluble fraction were more appropriate as a source of antigens for diagnostic procedures.

New multilayer coating using quaternary ammonium chitosan and κ-carrageenan in capillary electrophoresis: application in fast analysis of betaine and methionine.

The aim of this study was to develop a new multilayer coating with crosslinked quaternary ammonium chitosan (hydroxypropyltrimethyl ammonium chloride chitosan; HACC) and κ-carrageenan for use in capillary electrophoresis. A new semi-permanent multilayer coating was formed using the procedure developed and the method does not require the presence of polymers in the background electrolyte (BGE). The new capillary multilayer coating showed a cathodic electroosmotic flow (EOF) of around 30×10(-9) m(2) V(-1) s(-1) which is pH-independent in the range of pH 2 to 10. The enhanced EOF at low pH obtained contributed significantly to the development of a fast method of separation. The multilayer coating was then applied in the development of a fast separation method to determine betaine and methionine in pharmaceutical formulations by capillary zone electrophoresis (CZE). The BGE used to determine the betaine and methionine concentrations was composed of 10 mmol L(-1) tris(hydroxymethyl) aminomethane, 40 mmol L(-1) phosphoric acid and 10% (v/v) ethanol, at pH 2.1. A fused-silica capillary of 32 cm (50 µm ID×375 µm OD) was used in the experiments and samples and standards were analyzed employing the short-end injection procedure (8.5 cm effective length). The instrumental analysis time of the optimized method was 1.53 min (approx. 39 runs per hour). The validation of the proposed method for the determination of betaine and methionine showed good linearity (R(2)>0.999), adequate limit of detection (LOD <8 mg L(-1)) for the concentration in the samples and inter-day precision values lower than 3.5% (peak area and time migration). The results for the quantification of the amino acids in the samples determined by the CZE-UV method developed were statistically equal to those obtained with the comparative LC-MS/MS method according to the paired t-test with a confidence level of 95%.

In search of the thermo/halochromism of the E(T)(30) pyridinium-N-phenolate betaine dye.

The thermohalochromic behavior of Reichardt's E(T)(30) betaine - the temperature-dependent variation of its halochromic band in the presence of a cation - was investigated for the first time in NaI solutions of HBD- (methanol, ethanol, 1-propanol, 1-butanol) and non-HBD-solvents (acetonitrile, dimethylformamide) at 15 and 55 °C. The solvent-dependent thermohalochromism of the pyridinium-N-phenolate betaine dye was interpreted in terms of the effect of the temperature on the dye-cation association in solution.

Amino acid residues critical for the specificity for betaine aldehyde of the plant ALDH10 isoenzyme involved in the synthesis of glycine betaine.

Plant Aldehyde Dehydrogenase10 (ALDH10) enzymes catalyze the oxidation of ω-primary or ω-quaternary aminoaldehydes, but, intriguingly, only some of them, such as the spinach (Spinacia oleracea) betaine aldehyde dehydrogenase (SoBADH), efficiently oxidize betaine aldehyde (BAL) forming the osmoprotectant glycine betaine (GB), which confers tolerance to osmotic stress. The crystal structure of SoBADH reported here shows tyrosine (Tyr)-160, tryptophan (Trp)-167, Trp-285, and Trp-456 in an arrangement suitable for cation-π interactions with the trimethylammonium group of BAL. Mutation of these residues to alanine (Ala) resulted in significant K(m)(BAL) increases and V(max)/K(m)(BAL) decreases, particularly in the Y160A mutant. Tyr-160 and Trp-456, strictly conserved in plant ALDH10s, form a pocket where the bulky trimethylammonium group binds. This space is reduced in ALDH10s with low BADH activity, because an isoleucine (Ile) pushes the Trp against the Tyr. Those with high BADH activity instead have Ala (Ala-441 in SoBADH) or cysteine, which allow enough room for binding of BAL. Accordingly, the mutation A441I decreased the V(max)/K(m)(BAL) of SoBADH approximately 200 times, while the mutation A441C had no effect. The kinetics with other ω-aminoaldehydes were not affected in the A441I or A441C mutant, demonstrating that the existence of an Ile in the second sphere of interaction of the aldehyde is critical for discriminating against BAL in some plant ALDH10s. A survey of the known sequences indicates that plants have two ALDH10 isoenzymes: those known to be GB accumulators have a high-BAL-affinity isoenzyme with Ala or cysteine in this critical position, while non GB accumulators have low-BAL-affinity isoenzymes containing Ile. Therefore, BADH activity appears to restrict GB synthesis in non-GB-accumulator plants.

Comparison between two anionic reverse micelle interfaces: the role of water-surfactant interactions in interfacial properties.

The water/sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micelle (RM) system is revisited by using, for the first time, molecular probes to investigate interface properties. The solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) and 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) in the water/NaDEHP/toluene system is studied, and the results are compared with those obtained in water/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/toluene RM media. The results demonstrate that the micropolarity, microviscosity, interfacial water structure, molecular probe partition, and intramolecular electron-transfer processes are dramatically altered for NaDEHP RM interfaces in comparison to the AOT systems. Because of organic nonpolar solvent penetration into the interface, NaDEHP RM media offer an interface with lower micropolarity and microviscosity than AOT media. Also, the interfacial water in the NaDEHP system shows enhanced water-water hydrogen-bond interaction in comparison with bulk water. The AOT RM interface represents a unique environment for PRODAN to undergo dual emission.

The positive halochromism of phenolate dyes in hydroxylic solutions of tetraalkylammonium cations.

By contrast with the negative halochromic behaviour shown by phenolate betaines in the presence of alkaline and alkaline-earth cations, the addition of tetraalkylammonium salts to hydroxylic solutions of these dyes generate bathochromic shifts of their charge-transfer band. This positive halochromic behaviour by organic cations was examined systematically and its origin rationalized by nonspecific changes of the medium permittivity, and by specific dye-cation interactions in solution.

Solvent blends can control cationic reversed micellar interdroplet interactions. The effect of n-heptane:benzene mixture on BHDC reversed micellar interfacial properties: droplet sizes and micropolarity.

We have investigated, for the first time, the effect of the composition of the nonpolar organic media on the benzyl-n-hexadecyl-dimethylammonium chloride (BHDC) reversed micelles (RMs) properties at fixed temperature. To achieve this goal we have used the solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) as absorption probe and dynamic light scattering (DLS), to monitor droplet sizes, interfacial micropolarity, and sequestrated water structure of water/BHDC/n-heptane:benzene RMs. DLS results confirm the formation of the water/BHDC/n-heptane:benzene RMs at every n-heptane mole fraction (X(Hp)) investigated, that is, X(Hp) = 0.00, 0.13, 0.21, 0.30, and 0.38. Also, DLS was used to measure the RMs diffusion coefficient and to calculate the apparent droplet hydrodynamic diameter (d(App)) at different compositions of the nonpolar organic medium. The data suggest that as the n-heptane content increases, the interdroplet attractive interactions also increase with the consequent increment in the droplet size. Moreover, the interdroplet attractive interactions can be "switched on (increased)" or "switched off (decreased)" by formulation of appropriate n-heptane:benzene mixtures. Additionally, QB spectroscopy was used to obtain the "operational" critical micellar concentration (cmc) and to investigate both the RMs interfacial micropolarity and the sequestrated water structure in every RMs studied. The results show that BHDC RMs are formed at lower surfactant concentration when n-heptane or water content increases. When the interdroplet interaction "switches on", the RMs droplet sizes growth expelling benzene molecules from the RMs interface, favoring the water-BHDC interaction at the interface with the consequent increases in the interfacial micropolarity. Therefore, changing the solvent blend is possible to affect dramatically the interfacial micropolarity, the droplet sizes and the structure of the entrapped water.

Thermodynamic and structural characterization of zwitterionic micelles of the membrane protein solubilizing amidosulfobetaine surfactants ASB-14 and ASB-16.

Surface tension and isothermal titration calorimetry (ITC) were used to determine the critical micelle concentration (cmc) of the zwitterionic amidosulfobetaine surfactants ASB-14 and ASB-16 (linear-alkylamidopropyldimethylammoniopropanosulfonates) at 25 °C. The cmc and the heat of micellization were determined from 15 to 75 °C by ITC for both surfactants. The increase in temperature caused significant changes in the enthalpy and in the entropy of micellization, with small changes in the standard Gibbs energy (ΔG(mic)), which is consistent to an enthalpy−entropy compensation with a compensatory temperature of 311 K (ASB-14) and 314 K (ASB-16). In the studied temperature range, the heat capacity of micellization (ΔC(p)(mic)) was essentially constant. The experimental ΔC(p)(mic) was lower than that expected if only hydrophobic interactions were considered, suggesting that polar interactions at the head groups are of significant importance in the thermodynamics of micelle formation by these surfactants. Indeed, a NMR NOESY spectrum showed NOEs that are improbable to occur within the same monomer, resulting from interactions at the polar head groups involving more than one monomer. The ITC and NMR results indicate a tilt in the polar headgroup favoring the polar interactions. We have also observed COSY correlations typical of dipolar interactions that could be recovered with the partial alignment of the molecule in solution, which results in an anisotropic tumbling. The anisotropy suggested an ellipsoidal shape of the micelles, which results in a positive magnetic susceptibility, and ultimately in orientation induced by the magnetic field. Such an ellipsoidal shape was confirmed from results obtained by SAXS experiments that revealed aggregation numbers of 108 and 168 for ASB-14 and ASB-16 micelles, respectively. This study characterizes an interesting micelle system that can be used in the study of membrane proteins by solution NMR spectroscopy.

Ab initio study of the anomalous solvatochromic behavior of large betaines.

The structure and spectroscopic properties of a diluted compound can be deeply affected by its interaction with the neighboring molecules of the solvent, and the associated solvatochromism is an effect that becomes more noticeable with the increase in both the dipole moment of the solute and the polarity of the medium. The correct description of the complex set of interactions that prevail in the solvation process remains a challenge for theoreticians not only when interpreting an observed behavior but also when considering the possible existence of novel properties in untested solute-solvent systems. On the basis of an ab initio study, we examine here how the presence of solvents of different polarities should affect the electronic properties of a family of molecules, formally related to Betaine-30 (aka Reichardt's dye), whose donor (D) and acceptor (A) groups are terminally connected to conjugated chains of different sizes. Because these molecules exhibit elevated ground-state dipole moment that should strongly interact with molecules of a polar solvent, a large hypsochromic shift is predicted for them. However, in a recent gas-phase study of these molecules, we have established the existence of an "inversion" in the spatial localization of their frontier orbitals when the size of the conjugated bridge connecting the D and A groups is progressively increased. This fact has led us to suggest that the increase in size of dissolved betaines should be accompanied by a large variation in their solvatochromic properties. In this work, we first use the self-consistent reaction field approach at the configuration interaction level to estimate the expected bathochromic shift in the absorption spectra (positive solvatochromism) in the largest members of the investigated betaine family when dissolved in different low polarity solvents and then discuss the conformational changes as a consequence of the solute--solvent interactions. We then use these results to interpret the observed solvatochromic properties of push--pull molecules of varying size and discuss the corresponding implications on their photochemical properties.

Arsenic(III) methylation in betaine-nontronite clay-water suspensions under environmental conditions.

This paper reports arsenic methylation in betaine-nontronite clay-water suspensions under environmental conditions. Two nontronites (<0.05 mm), NAu-1 (green color, Al-enriched) and NAu-2 (brown color, Al-poor, contains tetrahedral Fe) from Uley Mine - South Australia were selected for this study. Betaine (pK(a)=1.83) was selected as methyl donor. The reaction between 5 g L(-1) clay, 20 ppm As(III), and 0.4M betaine at 7< or =pH(0)< or =9 under anoxic conditions was studied. The presence of nontronite clays were found to favor As(III) conversion to monomethylarsenic (MMA). Arsenic conversion was found to be as high as 50.2 ng MMA/ng As(III)(0). Conversion of As was found to be more quantitative in the presence of NAu-2 ((Na(0.72)) [Si(7.55) Al(0.16)Fe(0.29)][Al(0.34) Fe(3.54) Mg(0.05)] O(20)(OH)(4)) than NAu-1 ((Na(1.05)) [Si(6.98) Al(0.95)Fe(0.07)][Al(0.36) Fe(3.61) Mg(0.04)] O(20)(OH)(4)). The inherent negative charge at the nontronite tetrahedral layer stabilizes positively charged organic intermediate-reaction species, thereby leading to decreases in the overall methylation activation energy. The outcome of this work shows that nontronite clays catalyze As methylation to MMA via non-enzymatic pathway(s) under environmental conditions.

The chameleon-like nature of zwitterionic micelles: the intrinsic relationship of anion and cation binding in sulfobetaine micelles.

The rate of specific hydrogen ion-catalyzed hydrolysis of 2-( p-heptoxyphenyl)-1,3-dioxolane and acid-base equilibrium of 4-carboxy-1-n-dodecylpyridinium in zwitterionic micelles of SB3-14, C14H29NMe2+(CH2)3SO3(-) are controlled by NaClO4, which induces anionic character and uptake of H3O+ in the micelles. Other salts, e.g., NaF, NaCl, NaBr, NaNO3, NaI, NaBF4, have similar, but smaller, effects on the uptake of H3O+. Salt effects upon zeta potentials of SB3-14 micelles, estimated by capillary electrophoresis, are anion specific, and the anion order is similar to that of the rates of acid hydrolysis and of acid-base equilibria. Fluorescence quenching shows that the micellar aggregation number is not very sensitive to added salts, consistent with electrophoretic evidence. These specific anion effects follow the Hofmeister series and are related to anion hydration free energies.

Betaine protects urea-induced denaturation of myosin subfragment-1.

We have demonstrated previously that urea inhibits the activity and alters the tertiary structure of skeletal muscle myosin in a biphasic manner. This was attributed to differential effects on its globular and filamentous portion. The inhibition of catalytic activity was counteracted by methylamines. With the aim of comprehending the effects of urea on the catalytic (globular) portion of myosin, this study examines the effects of urea and the countereffects of betaine on the catalytic activity and structure of myosin subfragment-1. It is shown that urea inactivates subfragment-1 in parallel with its ability to induce exposure of the enzyme hydrophobic domains, as assessed using intrinsic and extrinsic fluorescence. Both effects are counteracted by betaine, which alone does not significantly affect subfragment-1. Urea also enhances the accessibility of thiol groups, promotes aggregation and decreases the alpha-helix content of S1, effects that are also counteracted by betaine. We conclude that urea-induced inactivation of the enzyme is caused by partial unfolding of the myosin catalytic domain.

Thermosolvatochromism of betaine dyes revisited: theoretical calculations of the concentrations of alcohol-water hydrogen-bonded species and application to solvation in aqueous alcohols.

Solvatochromic data of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (RB) in aqueous methanol, 1-propanol, 2-propanol, and 2-methyl-2-propanol at 25 degrees C were recalculated by employing a recently introduced model that explicitly considers the presence of 1:1 alcohol-water hydrogen-bonded species, ROH-W, in bulk solution and their exchange equilibria with water and alcohol in the probe solvation microsphere. The thermosolvatochromic behavior of RB in aqueous ethanol was measured in the temperature range from 10 to 60 degrees C; the results thus obtained were treated according to the same model. All calculations require reliable values of Kdissoc, the dissociation constant of the ROH-W species. This was previously calculated from the dependence of the density of the binary solvent mixture on its composition. Through the use of iteration, the volume of the hydrogen-bonded species, VROH-W, and Kdissoc are obtained simultaneously from the same set of experimental data. This approach may be potentially problematic because Kdissoc and VROH-W are highly correlated. Therefore, we introduced the following approach: (i) VROH-W was obtained from ab initio calculations, (ii) these volumes were corrected for the nonideal behavior of the binary solvent mixtures at different temperatures, (iii) corrected VROH-W values were employed as a constant in the equation used to calculate Kdissoc (from density vs binary solvent mixture composition). VROH-W calculated by the COSMO-RS solvation model fitted the density data better than those calculated by the IEFPCM model. In all aqueous alcohols, solvation by ROH-W is favored over that by the two precursor solvents. In aqueous ethanol, a temperature increase resulted in a gradual desolvation of RB, due to a decrease in the hydrogen-bonding of both components of the mixture. The microscopic polarities of ROH-W are much closer to those of the precursor alcohols.

Betaine counteracts urea-induced conformational changes and uncoupling of the human erythrocyte Ca2+ pump.

We have investigated the effects of the protein structure-perturbing and function-perturbing osmolyte urea, and one of its physiological counteracting solutes, the methylamine compound (carboxymethyl)trimethylammonium hydroxide (betaine), on the structure and function of the human erythrocyte plasma-membrane Ca(2+)-ATPase. Betaine per se promoted a conformational change in the purified ATPase as revealed by steady-state and time-resolved intrinsic fluorescence spectroscopy. The conformational change promoted by betaine was shown to be related to changes in the degree of compaction of the protein structure, as detected by fluorescence-quenching measurements using acrylamide and iodide, non-charged and charged quenchers, respectively. In contrast, urea promoted a biphasic increase in exposure of tryptophan residues of the purified ATPase to the aqueous medium. With the use of membrane-bound ATPase, increasing concentrations of urea up to 1.5 M promoted a twofold increase in the Ca(2+)-ATPase activity, and the simultaneous inhibition of Ca2+ accumulation indicated that ATP hydrolysis became uncoupled from Ca2+ transport. Higher urea concentrations promoted a pronounced inhibition of ATP hydrolysis. In the absence of urea, betaine decreased ATP hydrolysis without affecting Ca2+ transport, whereas it counteracted the strong inhibition of Ca(2+)-ATPase activity by urea concentrations as high as 7 M. Betaine also protected Ca2+ accumulation against inhibition with concentrations of urea up to 1.5 M, indicating that the methylamine is able to counteract the uncoupling of the ATPase observed at lower urea concentrations. These results suggest that betaine modifies the effects of urea on the erythrocyte Ca(2+)-ATPase, through specific solute-induced conformational changes that protect the energy-transduction capacity of the enzyme.