ABSTRACT
A key characteristic to be elucidated, to address the harmful health risks of environmental perfluorinated alkyl substances (PFAS), is their binding modes to serum albumin, the most abundant protein in blood. Hexafluoropropylene oxide-dimer acid (GenX or HFPO-DA) is a new industrial replacement for the widespread linear long-chain PFAS. However, the detailed interaction of new-generation short-chain PFAS with albumin is still lacking. Herein, the binding characteristics of bovine serum albumin (BSA) to GenX were explored at the molecular and cellular levels. It was found that this branched short-chain GenX could bind to BSA with affinity lower than that of legacy linear long-chain perfluorooctanoic acid (PFOA). Site marker competitive study and molecular docking simulation revealed that GenX interacted with subdomain IIIA to form BSA-GenX complex. Consistent with its weaker affinity to albumin protein, the cytotoxicity of branched short-chain GenX was less susceptible to BSA binding compared with that of the linear long-chain PFOA. In contrast to the significant effects of strong BSA-PFOA interaction, the weak affinity of BSA-GenX binding did not influence the structure of protein and the cytotoxicity of GenX. The detailed characterization and direct comparisons of serum albumin interaction with new generation short-chain GenX will provide a better understanding for the toxicological properties of this new alternative.
Subject(s)
Fluorocarbons , Molecular Docking Simulation , Serum Albumin, Bovine , Fluorocarbons/chemistry , Serum Albumin, Bovine/chemistry , Animals , Environmental Pollutants/chemistry , Environmental Pollutants/toxicity , Humans , Caprylates/chemistryABSTRACT
Timely and efficient analysis of the fluorinated per- and polyfluoroalkyl substances (PFAS) in an atmospheric environment is critical to environmental pollution traceability, early warnings, and governance. Here, a portable, reliable, and intelligent digital monitoring device for onsite real-time dynamic analysis of atmospheric perfluorooctanoic acid (PFOA) is proposed. The sensing mechanism is attributed to the oxidase-like activity of PtCoNPs@g-C3N4 that is reversely regulated by the surface modification of a PFOA-recognizable DNA aptamer, engineering a PFOA-activated oxidase-like activity of nanozyme (Apt-PtCoNPs@g-C3N4) to combine the nonfluorescence o-phenylenediamine (OPD) as the dual-modality response system. The present PFOA interacts with its DNA aptamer and dissociates from the surface of Apt-PtCoNPs@g-C3N4, restoring the oxidase-like activity of PtCoNPs@g-C3N4 to oxidize OPD into yellow fluorescence 2,3-diphenylaniline (DAP), thereby observing a PFOA-triggered colorimetric as well as fluorescence dual-modality change. Then, a hydrogel kit-programmed Apt-PtCoNPs@g-C3N4 + OPD system is used as the sensitive element to incorporate into this homemade portable device, automatically gathering and processing the PFOA-triggered hydrogel colorimetric and fluorescence image gray values by our self-weaving software, ultimately realizing the onsite real-time dynamic analysis of atmospheric PFOA surrounding a fluorochemical production plant. This work provides a direction and theoretical foundation for designing portable onsite screening devices that cater to other atmospheric contaminants detection requirements.
Subject(s)
Aptamers, Nucleotide , Caprylates , Fluorocarbons , Aptamers, Nucleotide/chemistry , Fluorocarbons/chemistry , Fluorocarbons/analysis , Caprylates/analysis , Caprylates/chemistry , Oxidoreductases/metabolism , Biosensing Techniques/methods , Air Pollutants/analysis , Environmental Monitoring/methods , Limit of DetectionABSTRACT
PURPOSE: Sodium N-[8-(2-hydroxybenzoyl)amino]caprylate (SNAC) is a well-known penetration enhancer widely used in commercial applications. This study aims to broaden its properties through a novel strategy of converting it into its phenolate salts. The objective is to investigate the synthesis of SNAC phenolate salts, specifically SNAC-choline (SNAC-CH), SNAC-sodium (SNAC-Na), and SNAC-phosphatidylcholine (SNAC-PC), and to explore their potential application in improving the oral absorption of semaglutide. METHODS: The synthesis of SNAC phenolate salts was confirmed through 1H-NMR, FTIR, and an elemental analysis of C, H, N, and O. In vivo testing was conducted to assess the oral delivery of semaglutide using these synthesized SNAC phenolate salts. Pharmacokinetic (PK) values were measured to evaluate the impact on drug absorption. RESULTS: The synthesis of SNAC phenolate salts (SNAC-CH, SNAC-Na, and SNAC-PC) was successfully achieved under appropriate conditions, and their structures were confirmed using analytical techniques such as IR, NMR, and CHN elemental analysis. The paradigm of their use was evaluated through an oral pharmacokinetic (PK) in vivo study using SNAC phenolate salts, which did not impair the original SNAC PK values. This suggests that this strategy holds promise as a potential new effective enhancer for oral absorption. CONCLUSIONS: The utilization of SNAC phenolate salts presents a novel and promising strategy for extending the verity of penetration enhancers' molecules and properties. Synthesizing phenolate salts represents a new chemical strategy that may open new avenues in molecular development. This approach holds future potential to enhance the oral delivery of peptide drugs like semaglutide without compromising therapeutic efficacy. Overall, it offers significant advancements in the field by providing a potential alternative to injectable peptides through oral delivery systems.
Subject(s)
Biological Availability , Caprylates , Glucagon-Like Peptides , Glucagon-Like Peptides/pharmacokinetics , Glucagon-Like Peptides/administration & dosage , Glucagon-Like Peptides/chemistry , Administration, Oral , Animals , Caprylates/chemistry , Salts/chemistry , Rats , MaleABSTRACT
In this work, coacervation in primary amines solutions with hydrophobic natural deep eutectic solvents based on terpenoids and carboxylic acids was demonstrated for the first time. A liquid-phase microextraction approach was developed based on supramolecular solvent formation with primary amine acting as amphiphile and hydrophobic deep eutectic solvent making up mixed vesicles and serving as coacervation agent. Such supramolecular solvents could be used to separate wide range of substances from different aqueous media, such as food products, biological liquids and wastewaters. It is important that both hydrophobic and ionic interactions with supramolecular aggregates take place ensuring synergetic effect and better extraction ability, which is significant in separating relatively polar analytes. Different primary amines and deep eutectic solvents were investigated for liquid-phase microextraction of proof-of-concept amphoteric analyte (enrofloxacin, widely used veterinary fluoroquinolone antibiotic) and its determination by high-performance liquid chromatography with fluorescence detection using Shimadzu LC-20 Prominence chromatograph and RF-20A fluorescence detector. It was found that the supramolecular solvent based on 1-nonylamine, formed after addition of a deep eutectic solvent based on menthol and hexanoic acid (molar ratio of 1:1), provided maximum extraction recovery (85 %) and maximum enrichment factor (34). To characterize the extraction system, the composition of the phases was investigated, and cryo-transmission electron microscopy images were obtained. Vesicular aggregates were observed in the supramolecular solvent. The extraction mechanism was proposed in terms of formation of mixed aggregates to capture the analyte. Limit of detection was found to be 7 µg kg-1, while linear range of 20-250 µg kg-1 was established. Relative standard deviation values were lower than 7 %. Relative bias did not exceed 12 %.
Subject(s)
Amines , Deep Eutectic Solvents , Enrofloxacin , Hydrophobic and Hydrophilic Interactions , Liquid Phase Microextraction , Milk , Enrofloxacin/analysis , Milk/chemistry , Animals , Amines/chemistry , Amines/analysis , Deep Eutectic Solvents/chemistry , Liquid Phase Microextraction/methods , Chromatography, High Pressure Liquid/methods , Menthol/chemistry , Menthol/analysis , Limit of Detection , Anti-Bacterial Agents/analysis , Anti-Bacterial Agents/chemistry , Solvents/chemistry , Caprylates/chemistry , Caprylates/analysis , Food Contamination/analysis , CaproatesABSTRACT
The assessment of perfluorooctanoic acid (PFOA) photocatalytic degradation usually involves tedious pre-treatment and sophisticated instrumentation, making it impractical to evaluate the degradation process in real-time. Herein, we synthesized a series of lanthanide metal-organic frameworks (Ln-MOFs) with outstanding fluorescent sensing properties and applied them as luminescent probes in the photocatalytic degradation reaction of PFOA for real-time evaluation. As the catalytic reaction proceeds, the fluorescence color changes significantly from green to orange-red due to the different interaction mechanisms between the electron-deficient PFOA and smaller radius F- with the ratiometric fluorescent probe MOF-76 (Tb: Eu = 29:1). The limit of detection (LOD) was calculated to be 0.0127 mM for PFOA and 0.00746 mM for F-. In addition, the conversion rate of the catalytic reaction can be read directly based on the chromaticity value by establishing a three-dimensional relationship graph of G/R value-conversion rate-time (G/R indicates the ratio between green and red luminance values in the image.), allowing for real-time and rapid tracking of the PFOA degradation. The recoveries of PFOA and F- in the actual water samples were 99.3-102.7% (RSD = 2.2-4.4%) and 100.7-105.3% (RSD = 3.9-6.8%), respectively. Both theoretical calculations and experiments reveal that the detection mechanism was attributed to the photoinduced electron transfer and energy transfer between the analytes and the probe. This method simplifies the sample analysis process and avoids the use of bulky instruments, and thus has great potential on the design and development of quantitative time-resolved visualization methods to assess catalytic performance and reveal mechanisms.
Subject(s)
Caprylates , Fluorescent Dyes , Fluorocarbons , Metal-Organic Frameworks , Water Pollutants, Chemical , Metal-Organic Frameworks/chemistry , Fluorescent Dyes/chemistry , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/chemistry , Caprylates/chemistry , Caprylates/analysis , Fluorocarbons/chemistry , Fluorocarbons/analysis , Catalysis , Lanthanoid Series Elements/chemistry , Limit of Detection , PhotolysisABSTRACT
The removal of per- and polyfluoroalkyl substances (PFAS) from drinking water is urgently needed. Here, we demonstrated high performance of vesicles on PFAS adsorption. Vesicles used in this study were enclosed amphiphile bilayers keeping their hydrophobic groups inside and their hydrophilic groups outside in water. The distribution coefficient Kd of perfluorooctane sulfonic acid (PFOS) for vesicles was 5.3 × 105 L/kg, which is higher than that for granulated activated carbon (GAC), and Kd of perfluorooctanoic acid (PFOA) for vesicles was 103-104 L/kg. The removal efficiencies of PFOA and PFOS adsorption on DMPC vesicles were 97.1 ± 0.1% and 99.4 ± 0.2%, respectively. The adsorption behaviors of PFOA and PFOS on vesicles were investigated by changing the number of cis-double bonds in the hydrophobic chains of the vesicle constituents. Moreover, vesicles formed by membranes in the different phases were also tested. The results revealed that, when vesicles are formed of a membrane in the liquid-crystalline (liquid-like) phase, the adsorption amounts of both PFOA and PFOS increased as the cis-double bond in the hydrocarbon chains decreased, which is considered due to molecular shape similarity. When vesicles are formed of a membrane in the gel (solid-like) phase, they do not adsorb PFAS as much as in the liquid-crystalline phase, even though the hydrocarbon chains do not have any cis-double bond. Our findings demonstrate that vesicles can be utilized as PFAS adsorbents by optimizing the structure of vesicle constituents and their thermodynamical phase. Indeed, the vesicles (DMPC) were demonstrated that they can adsorb PFOA and PFOS, and be coagulated by a coagulant even in environmental water. The coagulation will enable the removal of PFOA and PFOS from the water after adsorption.
Subject(s)
Alkanesulfonic Acids , Caprylates , Fluorocarbons , Hydrophobic and Hydrophilic Interactions , Water Pollutants, Chemical , Water Purification , Fluorocarbons/chemistry , Adsorption , Water Pollutants, Chemical/chemistry , Alkanesulfonic Acids/chemistry , Alkanesulfonic Acids/isolation & purification , Caprylates/chemistry , Water Purification/methods , Charcoal/chemistry , Drinking Water/chemistryABSTRACT
Recent regulatory actions aim to limit per- and polyfluoroalkyl substances (PFAS) concentrations in drinking water and wastewaters. Regenerable anion exchange resin (AER) is an effective separation process to remove PFAS from water but will require PFAS post-treatment of the regeneration wastestream. Electrocatalytic (EC) processes using chemically boron-doped diamond electrodes, stable in a wide range of chemical compositions show potential to defluorinate PFOA in drinking water and wastewater treatments. Chemical composition and concentration of mineral salts in supporting electrolytes affect AER regeneration efficiency, and play a crucial role in the EC processes. Their impact on PFAS degradation remains understudied. This study investigates the impact of 17 brine electrolytes with different compositions on perfluorooctanoic acid (PFOA) degradation in an alkaline medium and explores the correlation between the rate of PFOA degradation and the solution's conductivity. Results show that higher electrolyte concentrations and conductivity lead to faster PFOA degradation rates. The presence of chloride anions have negligible impact on the degradation rate. However, the presence of nitrate salts reduce PFOA degradation efficiency. Additionally, the use of mixed electrolytes may be a promising approach for reducing the cost of EC operations. PFOA degradation was not influenced by the pH of the bulk solution.
Subject(s)
Caprylates , Electrolytes , Fluorocarbons , Water Pollutants, Chemical , Water Purification , Caprylates/chemistry , Fluorocarbons/chemistry , Hydrogen-Ion Concentration , Water Pollutants, Chemical/chemistry , Electrolytes/chemistry , Water Purification/methods , Catalysis , Wastewater/chemistry , Drinking Water/chemistry , ElectrodesABSTRACT
The presence of perfluoroalkyl substances (PFAS) in the environment poses a significant threat to ecological safety and environmental health. Widespread microplastics (MPs) have been recognized as vectors for emerging contaminants due to human activities. However, the adsorption behaviors of PFAS on MPs, especially on aged MPs, have not been extensively investigated. This study aimed to investigate the adsorption behaviors of perfluorooctanoic acid (PFOA) on aged MPs (polystyrene, polyethylene, and polyethylene terephthalate) treated with UV irradiation and persulfate oxidation under salinity and dissolve organic matter (DOM) condition. Carbonyl index values of MPs increased after the aged treatment, indicating the production of oxygen-containing groups. The PFOA adsorption on aged MPs was impacted by the co-existence of Na+ ions and DOM. As PFOA adsorption onto aged MPs was mainly controlled by hydrophobic interaction, the electrostatic interaction also made a contribution, but there was no significant change in PFOA adsorption behavior between the pristine and aged MPs. While these findings provide insight into PFAS adsorption on aged MPs, further research is necessary to account for the complexity of the real environment. PRACTITIONER POINTS: Adsorption behaviors of perfluorooctanoic acid (PFOA) on aged microplastics were investigated. Hydrophobic interaction mainly controlled PFOA adsorption on aged microplastics (MPs). Co-existence dissolve organic matter and salinity influenced PFOA adsorption behaviors on aged MPs.
Subject(s)
Caprylates , Fluorocarbons , Microplastics , Water Pollutants, Chemical , Fluorocarbons/chemistry , Caprylates/chemistry , Microplastics/chemistry , Adsorption , Water Pollutants, Chemical/chemistryABSTRACT
Slow release of emerging contaminants limits their accessibility from soil to pore water, constraining the treatment efficiency of physio-chemical treatment sites. DC fields mobilize organic contaminants and influence their interactions with geo-matrices such as zeolites. Poor knowledge, however, exists on the joint application of heating and electrokinetic approaches on perfluorooctanoic acid (PFOA) transport in porous media. Here, we investigated electrokinetic PFOA transport in zeolite-filled percolation columns at varying temperatures. Variations of pseudo-second-order kinetic constants (kPSO) were correlated to the liquid viscosity variations (η) and elctroosmotic flow velocities (vEOF). Applying DC fields and elevated temperature significantly (>37%) decreased PFOA sorption to zeolite. A good correlation between η, vEOF, and kPSO was found and used to develop an approach interlinking the three parameters to predict the joint effects of DC fields and temperature on PFOA sorption kinetics. These findings may give rise to future applications for better tailoring PFOA transport in environmental biotechnology.
Subject(s)
Caprylates , Fluorocarbons , Zeolites , Caprylates/chemistry , Fluorocarbons/chemistry , Adsorption , Zeolites/chemistry , Kinetics , Models, ChemicalABSTRACT
BACKGROUND: Therapeutic drug monitoring of treatment with therapeutic antibodies is hampered by the application of a wide range of different methods in the quantification of serum levels. LC-MS based methods could significantly improve comparability of results from different laboratories, but such methods are often considered complicated and costly. We developed a method for LC-MS/MS based quantification of 11 therapeutic antibodies concomitantly measured in a single run, with emphasis on simplicity in sample preparation and low cost. RESULTS: After a single-step sample purification using caprylic acid precipitation to remove interfering proteins, the sample underwent proteolysis followed by LC-MS/MS analysis. Infliximab is used as internal standard for sample preparation while isotope-labeled signature peptides identified for each analyte are internal standards for the LC-MS/MS normalization. The method was validated according to recognized guidelines, and pipetting steps can be performed by automated liquid handling systems. The total precision of the method ranged between 2.7 and 7.3 % (5.1 % average) across the quantification range of 4-256 µg/ml for all 11 drugs, with an average accuracy of 96.3 %. Matrix effects were xamined in 55 individual patient samples instead of the recommended 6, and 147 individual patient samples were screened for interfering compounds. SIGNIFICANCE AND NOVELTY: Our method for simultaneous quantification of 11 t-mAb in human serum allows an unprecedented integration of robustness, speed and reduced complexity, which could pave the way for uniform use in research projects and clinical settings alike. In addition, the first LC-MS protocol for signature peptide-based quantification of durvalumab is described. This high throughput method can be readily adapted to a drug panel of choice.
Subject(s)
Caprylates , Tandem Mass Spectrometry , Tandem Mass Spectrometry/methods , Tandem Mass Spectrometry/economics , Humans , Caprylates/chemistry , Caprylates/blood , Chemical Precipitation , Chromatography, Liquid/methods , High-Throughput Screening Assays/economics , Antibodies, Monoclonal/blood , Antibodies, Monoclonal/chemistry , Liquid Chromatography-Mass SpectrometryABSTRACT
The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing "C8 fluorocarbons/perfluorooctanoate (PFOA)" at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040-51700 µg F g-1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 µg g-1, accounting for only 3-8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 µg F g-1, and 3 products exceeding the regulatory limit for PFOA (0.025 µg g-1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01-1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.
Subject(s)
Fluorine , Fluorocarbons , Waxes , Fluorocarbons/analysis , Fluorocarbons/chemistry , Fluorine/analysis , Fluorine/chemistry , Waxes/chemistry , Waxes/analysis , Caprylates/analysis , Caprylates/chemistryABSTRACT
There is considerable interest in addressing soils contaminated with per- and polyfluoroalkyl substances (PFAS) because of the PFAS in the environment and associated health risks. The neutralization of PFAS in situ is challenging. Consequently, mobilizing the PFAS from the contaminated soils into an aqueous solution for subsequent handling has been pursued. Nonetheless, the efficiency of mobilization methods for removing PFAS can vary depending on site-specific factors, including the types and concentrations of PFAS compounds, soil characteristics. In the present study, the removal of perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) from artificially contaminated soils was investigated in a 2D laboratory setup using electrokinetic (EK) remediation and hydraulic flushing by applying a hydraulic gradient (HG) for a duration of 15 days. The percent removal of PFOA by EK was consistent (â¼80%) after a 15-day treatment for all soils. The removal efficiency of PFOS by EK significantly varied with the OM content, where the PFOS removal increased from 14% at 5% OM to 60% at 50% OM. With HG, the percent removal increased for both PFOA and PFOS from about 20% at 5% OM up to 80% at 75% OM. Based on the results, the mobilization of PFAS from organic soil would be appropriate using both hydraulic flushing and EK considering their applicability and advantages over each other for site-specific factors and requirements.
Subject(s)
Alkanesulfonic Acids , Caprylates , Fluorocarbons , Soil Pollutants , Soil , Fluorocarbons/analysis , Fluorocarbons/chemistry , Soil Pollutants/analysis , Soil/chemistry , Alkanesulfonic Acids/analysis , Alkanesulfonic Acids/chemistry , Caprylates/analysis , Caprylates/chemistry , Environmental Restoration and Remediation/methodsABSTRACT
Research on the use of peracetic acid (PAA) activated by nonmetal solid catalysts for the removal of dissolved refractory organic compounds has gained attention recently due to its improved efficiency and suitability for advanced water treatment (AWT). Among these catalysts, nanocarbon (NC) stands out as an exceptional example. In the NC-based peroxide AWT studies, the focus on the mechanism involving multimedia coordination on the NC surface (reactive species (RS) path, electron reduction non-RS pathway, and singlet oxygen non-RS path) has been confined to the one-step electron reaction, leaving the mechanisms of multichannel or continuous electron transfer paths unexplored. Moreover, there are very few studies that have identified the nonfree radical pathway initiated by electron transfer within PAA AWT. In this study, the complete decomposition (kobs = 0.1995) and significant defluorination of perfluorooctanoic acid (PFOA, deF% = 72%) through PAA/NC has been confirmed. Through the use of multiple electrochemical monitors and the exploration of current diffusion effects, the process of electron reception and conduction stimulated by PAA activation was examined, leading to the discovery of the dynamic process from the PAA molecule â NC solid surface â target object. The vital role of prehydrated electrons (epre-) before the entry of resolvable electrons into the aqueous phase was also detailed. To the best of our knowledge, this is the first instance of identifying the nonradical mechanism of continuous electron transfer in PAA-based AWT, which deviates from the previously identified mechanisms of singlet oxygen, single-electron, or double-electron single-path transfer. The pathway, along with the strong reducibility of epre- initiated by this pathway, has been proven to be essential in reducing the need for catalysts and chemicals in AWT.
Subject(s)
Diamond , Electrons , Peracetic Acid , Peracetic Acid/chemistry , Diamond/chemistry , Electron Transport , Fluorocarbons/chemistry , Caprylates/chemistry , Surface Properties , Water Purification , Water Pollutants, Chemical/chemistryABSTRACT
Owing to the persistence and increasingly stringent regulations of perfluoroalkyl substances (PFAS), it is necessary to improve their adsorption capacities using activated carbon (AC). However, their adsorption capacities are suppressed by dissolved organic matter (DOM). In this study, two ACs modified with organic silicon (C-OS) and inorganic silicon (C-IS) were synthesized and used for the adsorption of PFAS in raw water (RW). The results showed that the PFAS adsorption capacity of C-IS was much less influenced by DOM than that of the original AC (C-virgin). In RW, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) adsorption capacities on C-IS were 15.08 and 3.65 times higher than those on C-virgin, respectively. DOM had less influence on the PFOA and PFOS adsorption kinetics of C-IS than C-OS and C-virgin. Under multi-PFAS condition, C-IS also exhibited slower desorption of short-chain PFAS and breakthrough in batch and column tests, respectively. Characterization of the ACs before and after adsorption and independent gradient modelling indicated that hydrogen bond interactions between the O-Si of C-IS and the -COOH or -CSO3H groups of PFAS contributed to PFAS adsorption. Density functional theory calculations demonstrated that the adsorption energy of C-IS was much lower than that of C-OS and C-virgin. The arrangement of PFAS molecules on C-OS was chaotic owing to the hydrophobic siloxane chain, whereas the arrangement of PFAS on C-IS was orderly in multi-layer or semi-micelle status and more favorable to PFAS adsorption. This study provides a new strategy for avoiding adverse effects of DOM on PFAS adsorption.
Subject(s)
Charcoal , Fluorocarbons , Water Pollutants, Chemical , Adsorption , Charcoal/chemistry , Fluorocarbons/chemistry , Water Pollutants, Chemical/chemistry , Silicon/chemistry , Caprylates/chemistry , Alkanesulfonic Acids/chemistry , Water Purification/methods , KineticsABSTRACT
PER: and polyfluorinated alkyl substances, especially perfluorooctanoic acid and perfluorooctane sulfonic acid (PFOX), have attracted considerable attention lately because of their widespread occurrence in aquatic environment and potential biological toxicity to animals and human beings. The development of economical, efficient, and engineerable adsorbents for removing PFOX in water has become one of the research focuses. This review summarized the recent progress on natural mineral and industrial solid based adsorbent (NM&ISW-A) and removal mechanisms concerning PFOX onto NM&ISW-A, as well as proposed the current challenges and future perspectives of using NM&ISW-A for PFOX removal in water. Kaolinite and montmorillonite are usually used as model clay minerals for PFOX removal, and have been proved to adsorb PFOX by ligand exchange and electrostatic attraction. Fe-based minerals, such as goethite, magnetite, and hematite, have better PFOX adsorption capacity than clay minerals. The adsorbent prepared from industrial solid waste by high temperature roasting has great potential application prospects. Fabricating nanomaterials, amination modification, surfactant modification, fluorination modification, developing versatile composites, and designing special porous structure are beneficial to improve the adsorption performance of PFOX onto NM&ISW-A by enhancing the specific surface area, positive charge, and hydrophobicity. Electrostatic interaction, hydrophobic interaction, hydrogen bond, ligand and ion exchange, and self-aggregation (formation of micelle or hemimicelle) are the main adsorption mechanisms of PFOX by NM&ISW-A. Among them, electrostatic and hydrophobic interactions play a considerable role in the removal of PFOX by NM&ISW-A. Therefore, NM&ISW-A with electrostatic functionalities and considerable hydrophobic segments enables rapid, efficient, and high-capacity removal of PFOX. The future directions of NM&ISW-A for PFOX removal include the preparation and regeneration of engineerable NM&ISW-A, the development of coupling technology for PFOX removal based on NM&ISW-A, the in-depth research on adsorption mechanism of PFOX by NM&ISW-A, as well as the development of NM&ISW-A for PFOX alternatives removal. This review paper would be helpful the comprehensive understanding of NM&ISW-A potential for PFOX removal and the PFOX removal mechanisms, and identifies the gaps for future research and development.
Subject(s)
Alkanesulfonic Acids , Caprylates , Fluorocarbons , Minerals , Water Pollutants, Chemical , Water Purification , Fluorocarbons/chemistry , Fluorocarbons/isolation & purification , Adsorption , Alkanesulfonic Acids/chemistry , Caprylates/chemistry , Water Pollutants, Chemical/chemistry , Water Purification/methods , Minerals/chemistry , Solid Waste , Industrial WasteABSTRACT
The transport of PFOS and PFOA in well-characterized sand was investigated for relatively low water saturations. An instrumented column was used for some experiments to provide real-time in-situ monitoring of water saturation and matric potential. The results showed that water saturations and matric potentials varied minimally during the experiments. Flow rates were monitored continuously and were essentially constant. These results demonstrate that surfactant-induced flow and other nonideal hydraulic processes did not materially impact PFAS transport for the experiment conditions. Air-water interfacial adsorption was demonstrated to provide the great majority of retention for PFOS and PFOA. Retention was significantly greater at the lower water saturations (0.35-0.45) compared to the higher saturations (â¼0.66) for both PFAS, due to the larger extant air-water interfacial areas. Retardation factors were 5 and 3-times greater at the lower water saturations for PFOS and PFOA, respectively. Early breakthrough was observed for the PFAS but not for the non-reactive tracers at the lower water saturations, indicating the possibility that air-water interfacial adsorption was rate-limited to some degree. Independently determined retention parameters were used to predict retardation factors for PFOS and PFOA, which were similar to the measured values in all cases. The consistency between the predicted and measured values indicates that PFAS retention was accurately represented. In addition, air-water interfacial adsorption coefficients measured from the transport experiments were consistent with independently measured equilibrium-based values. Based on these results, it appears that the air-water interfacial adsorption processes mediating the magnitude of PFOS and PFOA retention under lower water-saturation conditions are consistent with those for higher water saturations. This provides some confidence that our understanding of PFAS retention obtained from work conducted at higher water saturations is applicable to lower water saturations.
Subject(s)
Fluorocarbons , Water Pollutants, Chemical , Water , Fluorocarbons/chemistry , Adsorption , Water Pollutants, Chemical/chemistry , Water/chemistry , Alkanesulfonic Acids/chemistry , Caprylates/chemistry , Silicon Dioxide/chemistryABSTRACT
In this study, Cannabidiol crystals (CBD) were used as a BCS class II model drug to generate a novel therapeutic deep eutectic solvent (THEDES) with easy preparation using caprylic acid (CA). The hydrogen bonding interaction was confirmed by different techniques such as FT-IR and NMR, resulting in a hydrophobic system suitable for liquid formulations. The CBD-based THEDES, combined with a specific mixture of surfactants and co-surfactants, successfully formed a self-emulsifying drug delivery system (SEDDS) that generated uniform nano-sized droplets once dispersed in water. Hence, the THEDES showed compatibility with the self-emulsifying approach, offering an alternative method to load drugs at their therapeutic dosage. Physical stability concerns regarding the unconventional oily phase were addressed through stress tests using multiple and dynamic light scattering, demonstrating the robustness of the system. In addition, the formulated SEDDS proved effective in protecting CBD from the harsh acidic gastric environment for up to 2 h at pH 1.2. Furthermore, in vitro studies have confirmed the safety of the formulation and the ability of CBD to permeate Caco-2 cells when formulated. This investigation highlights the potential incorporation of THEDES in lipid-based formulations like SEDDS, expanding the avenues for innovative oral drug delivery approaches.
Subject(s)
Cannabidiol , Caprylates , Drug Delivery Systems , Emulsions , Solvents , Caco-2 Cells , Humans , Solvents/chemistry , Drug Delivery Systems/methods , Cannabidiol/chemistry , Cannabidiol/administration & dosage , Caprylates/chemistry , Surface-Active Agents/chemistry , Hydrophobic and Hydrophilic Interactions , Drug Stability , Chemistry, Pharmaceutical/methods , Emulsifying Agents/chemistryABSTRACT
Effective removal of organic UV filters from aquatic environmental compartments and swimming waters is very important because these substances are hazardous to humans and wildlife at low concentrations and act as endocrine disruptors. Therefore, the aim of the present article is to determine the extraction efficiencies of hydrophobic deep eutectic solvents (HDES) for the selected UV filters based on benzophenone structure (benzophenone, 2,4-dihydroxybenzophenone, 2,2´,4,4´-tetrahydroxybenzophenone, 2-hydroxy-4-methoxybenzophenone, 2,2´-dihydroxy-4-methoxybenzophenone, 4-methacryloxy-2-hydroxybenzophenone) from aqueous matrices. For this purpose, six HDESs based on dl-menthol in combination with caprylic, decanoic and lauric acid are prepared and compared with referent terpene solvents such as terpineol and linalool. The effect of various parameters such as HDES composition, volume ratio, frequency and shaking time are studied. The highest extraction efficiency is shown by HDES of menthol:caprylic acid (1:1) composition at the aqueous:organic phase volume ratio of 1:1, shaking frequency of 1500â¯rpm and shaking time of 15â¯min. The achieved extraction efficiencies are higher than 99.6â¯% for all benzophenones studied in the purification of stagnant pond water, swimming pool water and river water samples. After a simple and fast sample treatment, the residual levels of benzophenones in the waters are controlled by a newly developed sensitive HPLC-MS/MS method with LOQs in the range of 0.7 - 5.0â¯ng/mL.
Subject(s)
Benzophenones , Deep Eutectic Solvents , Hydrophobic and Hydrophilic Interactions , Sunscreening Agents , Water Pollutants, Chemical , Water Purification , Benzophenones/chemistry , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/chemistry , Sunscreening Agents/chemistry , Sunscreening Agents/toxicity , Water Purification/methods , Deep Eutectic Solvents/chemistry , Menthol/chemistry , Caprylates/chemistryABSTRACT
Hamburger wrapping paper, coated with water-based barrier coatings, used in the food packaging industry was studied by using the total organic fluorine (TOF) method based on combustion ion chromatography and fluorine-19 solid-state nuclear magnetic resonance (19F ss-NMR) spectroscopy. Although the TOF method is a fast and affordable method used to screen for per- and polyfluoroalkyl substances (PFAS), the amount of fluorine it measures is heavily dependent on the extraction step and, therefore could lead to inaccurate results. Fluorine-19 ss-NMR spectroscopy can differentiate between organic and inorganic fluorinated sources, eliminating the need for sample clean up. To illustrate this, the 19F ss-NMR spectra of clean coated paper samples that contained naturally occurring F- ions from the talc raw material and spiked samples containing perfluorooctanoic acid were compared. A range of experimental conditions was explored to improve sensitivity for low PFAS concentrations (in the order of 10-20 mg/kg). Despite the disadvantages of ss-NMR spectroscopy, such as the low limit of detection and resolution, the results demonstrate it can be a viable tool to directly detect PFAS moieties in consumer and food packaging. Therefore, 19F solid-state NMR spectroscopy challenges and complements current methods, which only provide indirect evidence of the presence of PFAS.
Subject(s)
Food Packaging , Magnetic Resonance Spectroscopy , Magnetic Resonance Spectroscopy/methods , Fluorine/analysis , Fluorocarbons/analysis , Fluorocarbons/chemistry , Food Contamination/analysis , Caprylates/analysis , Caprylates/chemistryABSTRACT
Per- and poly-fluoroalkyl substances (PFASs) are contaminants of emerging concern, yet the understanding of factors that control their leaching and release from contaminated soils remains limited. This study aimed to investigate the impact of dissolved organic carbon (DOC) on the release of PFASs-specifically, perfluorohexane sulfonate (PFHxS), perfluorooctane sulfonate (PFOS), and perfluorooctanoic acid (PFOA)from soils contaminated by aqueous film forming foam (AFFF). Batch aqueous leaching experiments were conducted on AFFF-contaminated soils under alkaline solution conditions (pH 9.5, 10.5, and 12) as it enhances leaching of both PFAS and DOC. Leaching of PFOS was significantly increased under alkaline conditions. Although the leaching of PFAS generally increased with pH, PFOS appeared to be more retained under the very alkaline pH conditions used in this study. At the same solution pH, leaching of PFOS and DOC was less in Ca(OH)2 than in NaOH. The retention of PFOS under these conditions may be attributable to the shielding of the negative charge of the soil components and colloids (e.g., DOC and clay minerals) in the leachates and/or the screening of negative charges on head groups of PFOS due to the high concentration of divalent cations. Solution chemistry affected desorption of PFOS more than PFHxS and PFOA. The study highlights that the influence of DOC on PFAS leaching and transport can be very complex, and depends on leachate chemistry (e.g., pH and cation type), PFAS chemistry, the magnitude of PFAS contamination and factors that influence the solid:liquid partitioning of organic carbon in soil.