Development, Pharmacokinetics and Antimalarial Evaluation of Dose Flexible 3D Printlets of Dapsone for Pediatric Patients.

The focus of current studies was to fabricate dose flexible printlets of dapsone (DDS) for pediatric patients by selective laser sintering (SLS) 3D printing method, and evaluate its physicochemical, patient in-use stability, and pharmacokinetic attributes. Eight formulations were fabricated using Kollicoat® IR, Eudragit® L-100-55 and StarCap®as excipients and evaluated for hardness, disintegration, dissolution, amorphous phase by differential scanning calorimetry and X-ray powder diffraction, in-use stability at 30 oC/75% RH for a month, and pharmacokinetic study in Sprague Dawley rats. The hardness, and disintegration of the printlets varied from 2.6±1.0 (F4) to 7.7±0.9 (F3) N and 2.0±0.4 (F2) to 7.6±0.6 (F3) sec, respectively. The drug was partially present as an amorphous form in the printlets. The drug was completely (>85%) dissolved in 20 min. No change in drug form or dissolution extent was observed after storage at in use condition. Pharmacokinetic profiles of both formulations (tablets and printlets) were almost superimposable with no statistical difference in pharmacokinetic parameters (Tmax, Cmax, and AUC0-¥)between formulations (p>0.05). Values of EC50 (half maximal effective concentration) and EC90 (maximal concentration inducing 90% maximal response) were 0.50±0.15 and 1.32±0.26 mM, 0.41±0.06 and 1.11±0.21, and 0.42±0.13 and 1.36±0.19 mM for DDS, printlet and tablet formulations, respectively, and differences were statistically insignificant (p>0.05). In conclusion, tablet and printlet formulations are expected to be clinical similar, thus clinically interchangeable.

Preparation and In Vitro Evaluation of Montelukast Sodium-Loaded 3D Printed Orodispersible Films for the Treatment of Asthma.

This research aims to produce orodispersible films (ODFs) and determine their potential use in the oral delivery of montelukast sodium for asthma treatment and allergic rhinitis. ODFs were successfully developed by Three-dimensional (3D) printing using propylene glycol (PG), and hydroxypropyl methylcellulose (HPMC), polyethylene glycol 400 (PEG). Finally, the amount of montelukast sodium in the ODFs was 5% (w/w). Drug-excipients compatibility with Fourier Transformed Infrared (FTIR) spectroscopy, mass uniformity, thickness, disintegration time, folding endurance, moisture absorption, pH, in vitro drug release (dissolution), drug content, moisture loss, moisture content, mechanical properties, and cytotoxicity studies were performed on the prepared films. All formulations disintegrated in approximately 40 s. Over 98% of drug release from all films within 2 min was confirmed. It was reported that Fm1-4 (8% HPMC and 1% PEG) and Fm2-4 (10% HPMC and 3% PEG) are more suitable for drug content, but Fm2-4 may be the ideal formulation considering its durability and transportability properties. Based on the characterization results and in vitro release values, the montelukast sodium ODF can be an option for other dosage forms. It was concluded that the formulations did not show toxic potential by in vitro cytotoxicity study with 3T3 cells. This new formulation can efficiently treat allergic rhinitis and asthma diseases.

Surface Solid Dispersion of Ketoconazole on Trehalose Dihydrate using Spray Drying to Achieve Enhanced Dissolution Rate.

Ketoconazole (K) is a poorly water-soluble drug that faces significant challenges in achieving therapeutic efficacy. This study aimed to enhance the dissolution rate of ketoconazole by depositing spray-dried ketoconazole (SK) onto the surface of ground trehalose dihydrate (T) using spray drying. Ketoconazole-trehalose surface solid dispersions (SKTs) were prepared in ratios of 1:1 (SK1T1), 1:4 (SK1T4), and 1:10 (SK1T10), and characterized them using particle size analysis, scanning electron microscopy, powder X-ray diffraction, and in vitro dissolution studies. Results showed that the dissolution rates of the dispersions were significantly higher than those of pure ketoconazole, with the 1:10 ratio showing the highest dissolution rate. The improved dissolution was attributed to the formation of a new crystalline phase and better dispersion of ketoconazole particles. These findings suggest that the surface solid dispersion approach could be a valuable method for enhancing the bioavailability of poorly water-soluble drugs.

Role of rheology in formulation and process design of hot melt extruded amorphous solid dispersions.

Hot melt extrusion (HME) has been widely used as a continuous and highly flexible pharmaceutical manufacturing process for the production of a variety of dosage forms. In particular, HME enables preparation of amorphous solid dispersions (ASDs) which can improve bioavailability of poorly water-soluble drugs. The rheological properties of drug-polymer mixtures can significantly influence the processability of drug formulations via HME and eventually the end-use product properties such as physical stability and drug release. The objective of this review is to provide an overview of various rheological techniques and properties that can be used to evaluate the flow behavior and processability of the drug-polymer mixtures as well as formulation characteristics such as drug-polymer interactions, miscibility/solubility, and plasticization to improve the HME processability. An overview of the thermodynamics and kinetics of ASD processing by HME is also provided, as well as aspects of scale-up and process modeling, highlighting rheological properties on formulation design and process development. Overall, this review provides valuable insights into critical rheological properties which can be used as a predictive tool to optimize the HME processing conditions.

Exploring Co-Amorphous Formulations Of Nevirapine: Insights From Computational, Thermal, And Solubility Analyses.

This study aimed to assess the formation of nevirapine (NVP) co-amorphs systems (CAM) with different co-formers (lamivudine-3TC, citric acid-CAc, and urea) through combined screening techniques as computational and thermal studies, solubility studies; in addition to develop and characterize suitable NVP-CAM. NVP-CAM were obtained using the quench-cooling method, and characterized by differential scanning calorimetry (DSC), X-ray diffractometry (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and polarized light microscopy (PLM), in addition to in vitro dissolution in pH 6.8. The screening results indicated intermolecular interactions occurring between NVP and 3TC; NVP and CAc, where shifts in the melting temperature of NVP were verified. The presence of CAc impacted the NVP equilibrium solubility, due to hydrogen bonds. DSC thermograms evidenced the reduction and shifting of the endothermic peaks of NVP in the presence of its co-formers, suggesting partial miscibility of the compounds. Amorphization was proven by XRD and PLM assays. In vitro dissolution study exhibited a significant increase in solubility and dissolution efficiency of NVP-CAM compared to free NVP. Combined use of screening studies was useful for the development of stable and amorphous NVP-CAM, with increased NVP solubility, making CAM promising systems for combined antiretroviral therapy.

A 3D in-vitro biomimicking Caco-2 intestinal permeability model-based assessment of physically modified telmisartan towards an alkalizer-free formulation development.

Efficient telmisartan delivery for hypertension management requires the incorporation of meglumine and/or sodium hydroxide as an alkalizer in the formulation. Long-term use of powerful alkalis with formulation as part of chronic therapy can cause metabolic alkalosis, ulcers, diarrhea, and body pain. Here, we aimed to design a telmisartan formulation without alkalizers. Telmisartan properties were tailor-made by microfluidizer-based physical modification. After microfluidization, telmisartan nanosuspension was lyophilized to obtain telmisartan premix powder. The optimized telmisartan nanosuspension had an average particle size of 579.85 ± 32.14 nm. The lyophilized premix was characterized by FT-IR, DSC, and PXRD analysis to ensure its physicochemical characteristics. The solubility analysis of premix showed 2.2 times, 2.3 times, and 6 times solubility improvement in 0.1 N HCl, phosphate buffer pH 7.5, and pH 6.8 compared to pure telmisartan. A 3D in-vitro Caco-2 model was developed to compare apparent permeability of API and powder premix. It showed that the powder premix was more permeable than pure API. The tablet formulation prepared from the telmisartan premix showed a dissolution profile comparable to that of the marketed formulation. The technique present herein can be used as a platform technology for solubility and permeability improvement of similar classes of molecules.

A unifying approach to drug-in-polymer solubility prediction: Streamlining experimental workflow and analysis.

This method paper describes currently used experimental methods to predict the drug-in-polymer solubility of amorphous solid dispersions and offers a combined approach for applying the Melting-point-depression method, the Recrystallization method, and the Melting-and-mixing method. It aims to describe and expand on the theoretical basis as well as the analytical methodology of the recently published Melting-and-mixing method. This solubility method relies on determining the relationship between drug loads and the enthalpy of melting and mixing of a crystalline drug in the presence of an amorphous polymer. This relationship is used to determine the soluble drug load of an amorphous solid dispersion from the recorded enthalpy of melting and mixing of the crystalline drug portion in a drug-polymer sample at equilibrium solubility. Due to the complex analytical methodology of the Melting-and-mixing method, a software solution called the Glass Solution Companion app was developed. Using this new tool, it is possible to calculate the predicted drug-in-polymer solubility and Flory-Huggins interaction parameter from experimental samples, as well as to generate the resulting solubility-temperature curve. This software can be used for calculations for all three experimental methods, which would be useful for comparing the applicability of the methods on a given drug-polymer system. Since it is difficult to predict the suitability of these drug-in-polymer solubility methods for a specific drug-polymer system in silico, some experimental investigation is necessary. By optimizing the experimental protocol, it is possible to collect data for the three experimental methods simultaneously for a specific drug-polymer system. These results can then be readily analyzed using the Glass Solution Companion app to find the most appropriate method for the drug-polymer system, and therefore, the most reliable drug-in-polymer solubility prediction.

Development and Characterization of Olaparib-Loaded Solid Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) for Pharmaceutical Applications.

This study aims to enhance the solubility of Olaparib, classified as biopharmaceutical classification system (BCS) class IV due to its low solubility and bioavailability using a solid self-nanoemulsifying drug delivery system (S-SNEDDS). For this purpose, SNEDDS formulations were created using Capmul MCM as the oil, Tween 80 as the surfactant, and PEG 400 as the co-surfactant. The SNEDDS formulation containing olaparib (OLS-352), selected as the optimal formulation, showed a mean droplet size of 87.0 ± 0.4 nm and drug content of 5.53 ± 0.09%. OLS-352 also demonstrated anticancer activity against commonly studied ovarian (SK-OV-3) and breast (MCF-7) cancer cell lines. Aerosil® 200 and polyvinylpyrrolidone (PVP) K30 were selected as solid carriers, and S-SNEDDS formulations were prepared using the spray drying method. The drug concentration in S-SNEDDS showed no significant changes (98.4 ± 0.30%, 25℃) with temperature fluctuations during the 4-week period, demonstrating improved storage stability compared to liquid SNEDDS (L-SNEDDS). Dissolution tests under simulated gastric and intestinal conditions revealed enhanced drug release profiles compared to those of the raw drug. Additionally, the S-SNEDDS formulation showed a fourfold greater absorption in the Caco-2 assay than the raw drug, suggesting that S-SNEDDS could improve the oral bioavailability of poorly soluble drugs like olaparib, thus enhancing therapeutic outcomes. Furthermore, this study holds significance in crafting a potent and cost-effective pharmaceutical formulation tailored for the oral delivery of poorly soluble drugs.

Novel analytical solutions for convolution in compartmental pharmacokinetic models and application to non-bioequivalent formulations.

Deconvolution and convolution are powerful tools that allow decomposition and reconstruction, respectively, of plasma versus time profiles from input and impulse functions. While deconvolution have commonly used compartmental approaches (e.g., Wagner-Nelson or Loo-Riegelman), convolution most typically used the convolution integral which can be solved with numerical methods. In 2005, an analytical solution for one-compartment pharmacokinetic was proposed and has been widely used ever since. However, to the best of our knowledge, analytical solutions for drugs distributed in more than one compartment have not been reported yet. In this paper, analytical solutions for compartmental convolution from both original and exact Loo-Riegelman approaches were developed and evaluated for different scenarios. While convolution from original approach was slightly more precise than that from the exact Loo-Riegelman, both methods were extremely accurate for reconstruction of plasma profiles after respective deconvolutions. Nonetheless, convolution from exact Loo-Riegelman was easier to interpret and to be manipulated mathematically. In fact, convolution solutions for three and more compartments can be easily written with this approach. Finally, our convolution analytical solution was applied to predict the failure in bioequivalence for levonorgestrel, demonstrating that equations in this paper may be useful tools for pharmaceutical scientists.

Assessing disintegration effectiveness: A thorough evaluation using the SeDeM-ODT expert system for doxylamine succinate orodispersible formulation.

BACKGROUND: The SeDeM-ODT expert system is designed to assess the suitability of the pharmaceutical ingredients for their conversion into an orodispersible formulation by direct compression. The tool can be utilized to select the most appropriate excipients that improve the compressibility and buccodispersibility of the formulation. OBJECTIVE: This study aimed to utilize the SeDeM-ODT expert system to evaluate the performance of superdisintegrants and select an appropriate superdisntegrant for Doxylamine Succinate orodispersible formulation. METHOD: The SeDeM-ODT expert system scrutinized the excipients to develop an orodispersible Doxylamine Succinate formulation. Among the 15 parameters of the tool, some of them were determined through experimental work, while the remaining were calculated through the experimental values of other parameters. The central composite design approach was used for formulation development. The prepared powder blends were compressed using the direct compression method and evaluated for different parameters (hardness, thickness, diameter, friability, weight variation, water absorption ratio, wetting time, and disintegration time). RESULTS: The results of the SeDeM-ODT expert system were correlated with the values obtained by the post-compression tests. The Crospovidone formulation (F7) was found to be an optimized formulation as it disintegrated quickly compared with the other formulations containing other superdisintegtrants. The results perfectly endorsed the SeDeM-ODT expert system evaluation, as Crospovidone showed the highest IGCB value of 6.396. CONCLUSION: The study observed the effectiveness of the expert system in accurately examining the performance of disintegrating agents. The study observed the effectiveness of the expert system in accurately examining the performance of disintegrating agents. The assessment proved Crospovidone to produce quicker disintegration in Doxylamine Succinate orodispersible formulation.

Enhanced bioavailability and efficacy in antimalarial treatment through QbD approach enteric encased inclusion delivery.

Aim: In this study, we aimed to prepare enteric encapsulated spheroids containing inclusion complex using quality by design approach.Methods: A Box-Behnken design was employed to determine effects of variables on selected responses. Risk assessment was conducted using Ishikawa fishbone diagram. A model with a p-value was less than 0.5 for being a significant error of model was determined based on significance 'lack of fit' value. Spheroids were formulated using the extrusion spheronization technique and were characterized using analytical techniques.Results: In vitro release was performed in both acidic (pH 1.2) and simulated intestinal (pH 6.8) conditions. Permeability studies demonstrated tenfold enhancement compared with arteether. In vivo studies further validated increase of 51.8% oral bioavailability. Ex vivo studies revealed 3.4-fold enhancement in antimalarial activity compared with arteether.Conclusion: These findings highlight effectiveness of inclusion complexation technique as a viable approach to enhance solubility and bioavailability for drugs with low aqueous solubility.

[Box: see text].

Investigation of Mirabegron-loaded Nanostructured Lipid Carriers for Improved Bioabsorption: Formulation, Statistical Optimization, and In-Vivo Evaluation.

Overactive bladder (OAB) is a usual medical syndrome that affects the bladder, and Mirabegron (MBG) is preferred medicine for its control. Currently, available marketed formulations (MYRBETRIQ® granules and MYRBETRIQ® ER tablets) suffer from low bioavailability (29-35%) hampering their therapeutic effectiveness and compromising patient compliance. By creating MBG nanostructured lipid carriers (MBG-NLCs) for improved systemic availability and drug release, specifically in oral administration of OAB treatment, this study aimed to address these issues. MBG-NLCs were fabricated using a hot-melt ultrasonication technique. MBG-GMS; MBG-oleic acid interaction was assessed by in silico molecular docking. QbD relied on the concentration of Span 80 (X1) and homogenizer speed (X2) as critical material attribute (CMA) and critical process parameter (CPP) respectively, while critical quality attributes (CQA) such as particle size (Y1) and cumulative drug release at 24 h (Y2) were estimated as dependent variables. 32 factorial design was utilized to investigate the interconnection in variables that are dependent and independents. Optimized MBG-NLCs with a particle size of 194.4 ± 2.25 nm were suitable for lymphatic uptake. A PDI score of 0.275 ± 0.02 and zeta potential of -36.2 ± 0.721 mV indicated a uniform monodisperse system with stable dispersion properties. MBG-NLCs exhibited entrapment efficiency of 77.3 ± 1.17% and a sustained release in SIF of 94.75 ± 1.60% for 24 h. MBG-NLCs exhibited the Higuchi model with diffusion as a release mechanism. A pharmacokinetic study in Wistar rats exhibited a 1.67-fold higher bioavailability as compared to MBG suspension. Hence, MBG-NLCs hold promise for treating OAB by improving MBG's oral bio absorption.

Development of Sinomenine Hydrochloride Sustained-release Pellet With Multiple Release Characteristics.

Due to the gastrointestinal side effects, the clinical application of sinomenine hydrochloride (SH) in rheumatoid arthritis is limited. The elderly population constitutes the primary group affected by this disease, and within this demographic, there are significant variations in gastric emptying time. To reduce the influence of individual differences on drug efficacy and concurrently alleviate gastrointestinal side effects, the SH sustained-release pellets with multiple release characteristics were developed, which comprised both regular sustained-release pellets and enteric-coated sustained-release pellets. The drug-loaded layer formulation was optimized by full factorial design. With the optimal formulation, the drug-loaded pellets achieved a yield of 96.05%, an encapsulation efficiency of 83.36% for SH, a relative standard deviation of 3.26% in SH content distribution, an average roundness of 0.971 for the pellets, and the particle size span of 0.808. The pellets with a 4 h SH release profile in an acidic environment and pellets displaying 4 h acid resistance followed by an 8 h SH release behavior in the intestinal environment were individually prepared through in vitro dissolution tests. The results demonstrated stable and compliant dissolution behavior of the formulation, along with excellent stability and physical appearance. This research offers novel insights and references for the innovative formulation of SH.

Skin Penetration and Permeation Properties of Transcutol® in Complex Formulations.

Percutaneous delivery is explored as alternative pathway for addressing the drawbacks associated with the oral administration of otherwise efficacious drugs. Short of breaching the skin by physical means, the preference goes to formulation strategies that augment passive diffusion across the skin. One such strategy lies in the use of skin penetration and permeation enhancers notably of hydroxylated solvents like propylene glycol (PG), ethanol (EtOH), and diethylene glycol monoethyl ether (Transcutol®, TRC). In a previous publication, we focused on the role of Transcutol® as enhancer in neat or diluted systems. Herein, we explore its' role in complex formulation systems, including patches, emulsions, vesicles, solid lipid nanoparticles, and micro or nanoemulsions. This review discusses enhancement mechanisms associated with hydroalcoholic solvents in general and TRC in particular, as manifested in multi-component formulation settings alongside other solvents and enhancers. The principles that govern skin penetration and permeation, notably the importance of drug diffusion due to solubilization and thermodynamic activity in the vehicle (formulation), drug solubilization and partitioning in the stratum corneum (SC), and/or solvent drag across the skin into deeper tissue for systemic absorption are discussed. Emphasized also are the interplay between the drug properties, the skin barrier function and the formulation parameters that are key to successful (trans)dermal delivery.

A Comparative Mathematical Analysis of Drug Release from Lipid-Based Nanoparticles.

Mathematical modeling of drug release from drug delivery systems is crucial for understanding and optimizing formulations. This research provides a comparative mathematical analysis of drug release from lipid-based nanoparticles. Drug release profiles from various types of lipid nanoparticles, including liposomes, nanostructured lipid carriers (NLCs), solid lipid nanoparticles (SLNs), and nano/micro-emulsions (NEMs/MEMs), were extracted from the literature and used to assess the suitability of eight conventional mathematical release models. For each dataset, several metrics were calculated, including the coefficient of determination (R2), adjusted R2, the number of errors below certain thresholds (5%, 10%, 12%, and 20%), Akaike information criterion (AIC), regression sum square (RSS), regression mean square (RMS), residual sum of square (rSS), and residual mean square (rMS). The Korsmeyer-Peppas model ranked highest among the evaluated models, with the highest adjusted R2 values of 0.95 for NLCs and 0.93 for other liposomal drug delivery systems. The Weibull model ranked second, with adjusted R2 values of 0.92 for liposomal systems, 0.94 for SLNs, and 0.82 for NEMs/MEMs. Thus, these two models appear to be more effective in forecasting and characterizing the release of lipid nanoparticle drugs, potentially making them more suitable for upcoming research endeavors.

Oral Bioavailability Enhancement of Poorly Soluble Drug by Amorphous Solid Dispersion Using Sucrose Acetate Isobutyrate.

The focus of the present work was to develop amorphous solid dispersion (ASD) formulation of aprepitant (APT) using sucrose acetate isobutyrate (SAIB) excipient, evaluate for physicochemical attributes, stability, and bioavailability, and compared with hydroxypropyl methylcellulose (HPMC) based formulation. Various formulations of APT were prepared by solvent evaporation method and characterized for physiochemical and in-vivo performance attributes such as dissolution, drug phase, stability, and bioavailability. X-ray powder diffraction indicated crystalline drug conversion into amorphous phase. Dissolution varied as a function of drug:SAIB:excipient proportion. The dissolution was more than 80% in the optimized formulation (F10) and comparable to HPMC based formulation (F13). Stability of F10 and F13 formulations stored at 25 C/60% and 40°C/75% RH for three months were comparable. Both ASD formulations (F10 and F13) were bioequivalent as indicated by the pharmacokinetic parameters Cmax and AUC0-∞. Cmax and AUC0-∞ of F10 and F13 formulations were 2.52 ± 0.39, and 2.74 ± 0.32 µg/ml, and 26.59 ± 0.39, and 24.79 ± 6.02 µg/ml.h, respectively. Furthermore, the bioavailability of ASD formulation was more than twofold of the formulation containing crystalline phase of the drug. In conclusion, stability and oral bioavailability of SAIB based ASD formulation is comparable to HPMC-based formulation of poorly soluble drugs.

Development and Evaluation of Solidified Supersaturated SNEDDS Loaded with Triple Combination Therapy for Metabolic Syndrome.

The present study aimed to develop and optimize solidified supersaturated self-nanoemulsifying drug delivery systems (SNEDDS) for the combined administration of antihypertensive, antihyperglycemic, and antihyperlipidemic drugs to enhance their solubility and dissolution during the treatment of metabolic syndrome. Various SNEDDS formulations were prepared and subjected to pharmaceutical assessment. The solubility of candesartan (CC), glibenclamide (GB), and rosuvastatin (RC) in SNEDDS and supersaturated SNEDDS formulations was evaluated. The optimized formulation was solidified using Syloid adsorbent at different ratios. Pharmaceutical characterization of the formulations included particle size, zeta potential, in-vitro dissolution, PXRD, FTIR, and SEM analysis. The prepared optimized formulation (F6) was able to form homogeneous nanoemulsion droplets without phase separation, which is composed of Tween 20: PEG-400: Capmul MCM (4: 3: 3). It was mixed with 5% PVP-K30 to prepare a supersaturated liquid SNEDDS formulation (F9). In addition, it was found that the addition of PVP-K30 significantly increased solubility CC and GB from 20.46 ± 0.48 and 6.73 ± 0.05 to 27.67 ± 1.72 and 9.45 ± 0.32 mg/g, respectively. In-vitro dissolution study revealed that liquid and solid SNEDD formulations remarkably improved the dissolution rates of CC, GB, and RC compared to pure drugs. XRPD and FTIR analysis revealed that all drugs present in an amorphous state within prepared solidified supersaturated SNEDDS formulation. SEM images showed that liquid SNEDDS formulation was successfully adsorbed on the surface of Syloid. Overall, optimized F9 and solidified supersaturated SNEDDS formulations showed superior performance in enhancing drug solubility and dissolution rate. The present study revealed that the proposed triple combination therapy of metabolic syndrome holds a promising strategy during the treatment of metabolic syndrome. Further in-vivo studies are required to evaluate the therapeutic efficacy of prepared solidified supersaturated SNEDDS formulation.

Design and Evaluation of Microemulsion-Based Drug Delivery Systems for Biofilm-Based Infection in Burns.

Normal skin is the first line of defense in the human body. A burn injury makes the skin susceptible to bacterial infection, thereby delaying wound healing and ultimately leading to sepsis. The chances of biofilm formation are high in burn wounds due to the presence of avascular necrotic tissue. The most common pathogen to cause burn infection and biofilm is Pseudomonas aeruginosa. The purpose of this study was to create a microemulsion (ME) formulation for topical application to treat bacterial burn infection. In the present study, tea tree oil was used as the oil phase, Tween 80 and transcutol were used as surfactants, and water served as the aqueous phase. Pseudo ternary phase diagrams were used to determine the design space. The ranges of components as suggested by the design were chosen, optimization of the microemulsion was performed, and in vitro drug release was assessed. Based on the characterization studies performed, it was found that the microemulsion were formulated properly, and the particle size obtained was within the desired microemulsion range of 10 to 300 nm. The I release study showed that the microemulsion followed an immediate release profile. The formulation was further tested based on its ability to inhibit biofilm formation and bacterial growth. The prepared microemulsion was capable of inhibiting biofilm formation.

Alternative buffer systems in biopharmaceutical formulations and their effect on protein stability.

The formulation of biopharmaceutical drugs is designed to eliminate chemical instabilities, increase conformational and colloidal stability of proteins, and optimize interfacial stability. Among the various excipients involved, buffer composition plays a pivotal role. However, conventional buffers like histidine and phosphate buffers may not always be the optimal choice for all monoclonal antibodies (mAbs). In this study, we investigated the effects of several alternative buffer systems on seven different mAbs, exploring various combinations of ionic strengths, concentrations of the main buffer component, mAb concentrations, and stress conditions. Protein stability was assessed by analyzing soluble aggregate formation through size exclusion chromatography. At low protein concentrations, protein instability after temperature stress was exclusively observed in the bis-TRIS/ glucuronate buffer. Conversely, freeze-thaw stress led to a significant increase in aggregate formation in tested formulations, highlighting the efficacy of several alternative buffers, particularly arginine/ citrate, in preserving protein stability. Under temperature stress, the introduction of arginine to histidine buffer systems provided additional stabilization, while the addition of lysine resulted in protein destabilization. Similarly, the incorporation of arginine into histi-dine/HCl buffer further enhanced protein stability during freeze--thaw cycles. At high protein concentrations, the histidine/citrate buffer emerged as one of the most optimal choices for addressing temperature and light-induced stress. The efficacy of histidine buffers in combating light stress might be attributed to the light-absorbing properties of histidine molecules. Our findings demonstrate that the development of biopharmaceutical formulations should not be confined to conventional buffer systems, as numerous alternative options exhibit comparable or even superior performance.

Assessing the Compatibility of Menatetrenone with Excipients: A Spectroscopic Approach and Implication in Drug Formulation Development.

An experiment was conducted to evaluate the compatibility of menatetrenone with selected pharmaceutical excipients. Fourier Transform Infrared Spectroscopy (FTIR) was used to assess drug-excipient compatibility. The present research systematically investigates the FTIR spectrum of each chemical compound separately and their physical blends, analyzing for possible shifts, alterations or novel peak that may indicate chemical interactions. This study aims to utilize spectral data interpretation to detect potential compatibility problems that may occur while design and production of menatetrenone containing dosage forms ensuring their increased stability and effectiveness. The FTIR results demonstrated that all the pharmaceutical excipients were compatible with menatetrenone. In conclusion, the compatibility of pharmaceutical excipients with menatetrenone was successfully assessed using FTIR that will aid in future design of formulations containing menatetrenone as therapeutic moiety.