Chitosan-coated manganese ferrite nanoparticles enhanced Rhodotorula toruloides carotenoid production.

The present study aims to analyze the interaction between Rhodotorula toruloides and magnetic nanoparticles and evaluate their effect on carotenoid production. The manganese ferrite nanoparticles were synthesized without chitosan (MnFe2O4) and chitosan coating (MnFe2O4-CS) by the co-precipitation method assisted by hydrothermal treatment. XRD (X-ray diffraction), Magnetometry, Dynamic Light Scattering (DLS) and FTIR (Fourier-Transform Infrared Spectroscopy), are used to characterize the magnetic nanoparticles. The crystallite size of MnFe2O4 was 16 nm for MnFe2O4 and 20 nm for MnFe2O4-CS. The magnetic saturation of MnFe2O4-CS was lower (39.6 ± 0.6 emu/g) than the same MnFe2O4 nanoparticles (42.7 ± 0.3 emu/g), which was attributed to the chitosan fraction presence. The MnFe2O4-CS FTIR spectra revealed the presence of the characteristic chitosan bands. DLS demonstrated that the average hydrodynamic diameters were 344 nm for MnFe2O4 and 167 nm for MnFe2O4-CS. A kinetic study of cell immobilization performed with their precipitation with a magnet demonstrated that interaction between magnetic nanoparticles and R. toruloides was characterized by an equilibrium time of 2 h. The adsorption isotherm models (Langmuir and Freundlich) were fitted to the experimental values. The trypan blue assay was used for cell viability assessment. The carotenoid production increased to 256.2 ± 6.1 µg/g dry mass at 2.0 mg/mL MnFe2O4-CS. The use of MnFe2O4-CS to stimulate carotenoid yeast production and the magnetic separation of biomass are promising nanobiotechnological alternatives. Magnetic cell immobilization is a perspective technique for obtaining cell metabolites.

Lysosomal Activation Mediated by Endocytosis in J774 Cell Culture Treated with N-Trimethyl Chitosan Nanoparticles.

Safety and effectiveness are the cornerstone objectives of nanomedicine in developing nanotherapies. It is crucial to understand the biological interactions between nanoparticles and immune cells. This study focuses on the manufacture by the microfluidic technique of N-trimethyl chitosan/protein nanocarriers and their interaction with J774 cells to elucidate the cellular processes involved in absorption and their impact on the immune system, mainly through endocytosis, activation of lysosomes and intracellular degradation. TEM of the manufactured nanoparticles showed spherical morphology with an average diameter ranging from 36 ± 16 nm to 179 ± 92 nm, depending on the concentration of the cargo protein (0, 12, 55 µg/mL). FTIR showed the crosslinking between N-trimethyl chitosan and the sodium tripolyphosphate and the α-helix binding loss of BSA. TGA revealed an increase in the thermal stability of N-trimethyl chitosan/protein nanoparticles compared with the powder. The encapsulation of the cargo protein used was demonstrated using XPS. Their potential to improve cell permeability and use as nanocarriers in future vaccine formulations was demonstrated. The toxicity of the nanoparticles in HaCaT and J774 cells was studied, as well as the importance of evaluating the differentiation status of J774 cells. Thus, possible endocytosis pathways and their impact on the immune response were discussed. This allowed us to conclude that N-trimethyl chitosan nanoparticles show potential as carriers for the immune system. Still, more studies are required to understand their effectiveness and possible use in therapies.

In vitro assessment of NaF/Chit supramolecular complex: Colloidal stability, antibacterial activity and enamel protection against S. mutans biofilm.

OBJECTIVES: This study assessed the effect of NaF/Chit suspensions on enamel and on S. mutans biofilm, simulating application of a mouthrinse. METHODS: The NaF/Chit particle suspensions were prepared at molar ratio [NaF]/Chitmon]≈0.68 at nominal concentrations of 0.2 % and 0.05 % NaF and characterized by Fourier transform infrared spectroscopy (FTIR), dynamic light scattering and zeta potential. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were measured. The S. mutans biofilm was formed for 7 days on eighty human enamel blocks that were divided into eight groups (n = 10/group): i) 0.05 % NaF solution; ii) 0.31 % Chit solution; iii) NaF/Chit(R=0.68) suspension at 0.05 % NaF; iv) 1.0 % HAc solution (Control); v) 0.2 % NaF solution; vi) 1.25 % Chit solution; vii) NaF/Chit(R=0.68) suspension at 0.2 % NaF; viii) 0.12 % chlorhexidine digluconate. The substances were applied daily for 90 s. S. mutans cell counts (CFU/mL) were performed, and the Knoop microhardness (KHN) of enamel samples were measured before and after biofilm formation. The KHN and CFU/mL data were analyzed by repeated measure ANOVA and Tukey's test (α = 0.05). RESULTS: Interactions between NaF and Chit were evidenced in solid state by FTIR spectra. The NaF/Chit complexes showed spontaneous microparticle formation and colloidal stability. The MIC and MBC ranged from 0.65 to 1.31 mg/mL. The NaF/Chit(R=0.68) suspension at 0.2 %NaF Group showed lower CFU/mL values than other groups. The NaF/Chit(R=0.68) suspensions Groups had the highest KHN values after biofilm formation. CONCLUSIONS: The NaF/Chit(R=0.68) complexes exhibited an antibacterial effect against S. mutans biofilm and reduced the enamel hardness loss. CLINICAL SIGNIFICANCE: The NaF/Chit(R=0.68) suspensions showed potential to be used as a mouthrinse for caries prevention.

3D printed benznidazole tablets based on an interpolyelectrolyte complex by melting solidification printing process (MESO-PP): An innovative strategy for personalized treatment of Chagas disease.

3D printing technology is revolutionizing pharmaceuticals, offering tailored solutions for solid dosage forms. This innovation is particularly significant for conditions like Chagas disease, which require weight-dependent treatments. In this work, a formulation of benznidazole (BNZ), the primary treatment for this infection, was developed to be utilized with the Melting Solidification Printing Process (MESO-PP) 3D printing technique. Considering the limited aqueous solubility of BNZ, an interpolyelectrolyte complex (IPEC), composed of chitosan and pectin, was integrated to improve its dissolution profile. The formulations, also called inks in this context, with and without IPEC were integrally characterized and compared. The printing process was studied, the release of BNZ from 3D-prints (3DP) was exhaustively analyzed and a physiologically based pharmacokinetic model (PKPB) was developed to forecast their pharmacokinetic performance. 3DP were successfully achieved loading 25, 50 and 100 mg of BNZ. The presence of the IPEC in the ink caused a decrease in the crystalline domain of BNZ and facilitated the printing process, reaching a print success rate of 83.3 %. Interestingly, 3DP-IPEC showed accelerated release dissolution profiles, releasing over 85 % of BNZ in 90 min, while 3DP took up to 48 h for doses above 25 mg. The PBPK model demonstrated that 3DP-IPEC tablets would present high bioavailability (0.92), higher than 3DP (0.36) and similar to the commercial product. This breakthrough holds immense potential for improving treatment outcomes for neglected diseases.

Spraying with encapsulated nitric oxide donor reduces weight loss and oxidative damage in papaya fruit.

The combination of nitric oxide (NO) donors with nanomaterials has emerged as a promising approach to reduce postharvest losses. The encapsulation of NO donors provides protection from rapid degradation and controlled release, enhancing the NO effectiveness in postharvest treatments. Moreover, the application method can also influence postharvest responses. In this study, two application methods were evaluated, spraying and immersion, using S-nitrosoglutathione (GSNO, a NO donor) in free and encapsulated forms on papaya fruit. Our hypothesis was that GSNO encapsulated in chitosan nanoparticles would outperform the free form in delaying fruit senescence. In addition, this study marks the pioneering characterization of chitosan nanoparticles containing GSNO within the framework of a postharvest investigation. Overall, our findings indicate that applying encapsulated GSNO (GSNO-NP-S) through spraying preserves the quality of papaya fruit during storage. This method not only minimizes weight loss, ethylene production, and softening, but also stimulates antioxidant responses, thereby mitigating oxidative damage. Consequently, it stands out as the promising technique for delaying papaya fruit senescence. This innovative approach holds the potential to enhance postharvest practices and advance sustainable agriculture.

Exploring the potential of chitin and chitosan in nanobiocomposites for fungal immunological detection and antifungal action.

Chitin is a polymer of N-acetylglucosamine and an essential component of the fungal cell wall. Chitosan is the deacetylated form of chitin and is also important for maintaining the integrity of this structure. Both polysaccharides are widely distributed in nature and have been shown to have a variety of applications in biomedicine, including their potential in immune sensing and as potential antifungal agents. In addition, chitin has been reported to play an important role in the pathogen-host interaction, involving innate and adaptive immune responses. This paper will explore the role of chitin and chitosan when incorporated into nanobiocomposites to improve their efficacy in detecting fungi of medical interest and inhibiting their growth. Potential applications in diagnostic and therapeutic medicine will be discussed, highlighting their promise in the development of more sensitive and effective tools for the early diagnosis of fungal infections. This review aims to highlight the importance of the convergence of nanotechnology and biology in addressing public health challenges.

Synthesis of hydrogels from biomaterials and their potential application in tissue engineering.

In this study, a series of hydrogels were synthesized from chitosan(s) that was crosslinking with glutaraldehyde at different concentrations. Ascorbic acid in an acidic medium was used to facilitate non-covalent interactions. The chitosan(s) was obtained from shrimp cytoskeleton; while ascorbic acid was extracted from xoconostle juice. The hydrogel reaction was monitored by UV-vis spectroscopy (550 nm) to determine the reaction kinetics and reaction order at 60 °C. The hydrogels structures were characterized by NMR, FT-IR, HR-MS and SEM, while the degree of cross-linking was examined with TGA-DA. The extracellular matrices were obtained as stable hydrogels where reached maximum crosslinking was of 7 %, independent of glutaraldehyde quantity added. The rheological properties showed a behavior of weak gels and a dependence of crosslinking agent concentration on strength at different temperatures. The cytotoxicity assay showed that the gels had no adverse effects on cellular growth for all concentrations of glutaraldehyde.

Optimized Electrophoretic Deposition of Chitosan/Mesoporous Glass Nanoparticles with Gentamicin on Titanium Implants: Enhancing Hemocompatibility and Antibacterial Activity.

Titanium-based implants have long been studied and used for applications in bone tissue engineering, thanks to their outstanding mechanical properties and appropriate biocompatibility. However, many implants struggle with osseointegration and attachment and can be vulnerable to the development of infections. In this work, we have developed a composite coating via electrophoretic deposition, which is both bioactive and antibacterial. Mesoporous bioactive glass particles with gentamicin were electrophoretically deposited onto a titanium substrate. In order to validate the hypothesis that the quantity of particles in the coatings is sufficiently high and uniform in each deposition process, an easy-to-use image processing algorithm was designed to minimize human dependence and ensure reproducible results. The addition of loaded mesoporous particles did not affect the good adhesion of the coating to the substrate although roughness was clearly enhanced. After 7 days of immersion, the composite coatings were almost dissolved and released, but phosphate-related compounds started to nucleate at the surface. With a simple and low-cost technique like electrophoretic deposition, and optimized stir and suspension times, we were able to synthesize a hemocompatible coating that significantly improves the antibacterial activity when compared to the bare substrate for both Gram-positive and Gram-negative bacteria.

Efficiency of the photodynamic therapy on viability of Streptococcus mutans in the oral cavity using chitosan nanoparticles: an in vitro study.

PURPOSE: This study aimed to investigate the efficiency of antimicrobial photodynamic therapy (aPDT) on Streptococcus mutans biofilm in the oral cavity using the photosensitizer chloroaluminum phthalocyanine encapsulated in chitosan nanoparticles (ClAlPc/Ch) at three preirradiation times. METHODS: Biofilms of Streptococcus mutans strains (ATCC 25,175) were cultivated on bovine tooth blocks and exposed to a 10% sucrose solution three times a day for 1 min over three consecutive days. The samples were randomly distributed into five treatment groups (n = 5): (I) aPDT with ClAlPc/Ch with a preirradiation time of 5 min (F5), (II) aPDT with ClAlPc/Ch with a preirradiation time of 15 min (F15), (III) aPDT with ClAlPc/Ch with a preirradiation time of 30 min (F30), (IV) 0.12% chlorhexidine digluconate (CHX), and (V) 0.9% saline solution (NaCl). After treatment, the S. mutans biofilms formed on each specimen were collected to determine the number of viable bacteria (colony-forming units (CFU)/mL). Data were analyzed for normality using the Shapiro-Wilk test and the analysis of variance (ANOVA) and Tukey HSD tests to analyze the number of viable bacteria (α = 0.05). RESULTS: The one-way ANOVA showed a difference between the groups (p = 0.0003), and the Tukey HSD posttest showed that CHX had the highest microbial reduction of S. mutans, not statistically different from the F5 and F15 groups, whereas the NaCl group had the lowest microbial reduction statistically similar to the F30 group. CONCLUSION: The results demonstrate that aPDT mediated by ClAlPc/Ch when used at preirradiation times of 5-15 min can be an effective approach in controlling cariogenic biofilm of S. mutans, being an alternative to 0.12% CHX.

Production and performance evaluation of chitosan/collagen/honey nanofibrous membranes for wound dressing applications.

Persistent bacterial infections are the leading risk factor that complicates the healing of chronic wounds. In this work, we formulate mixtures of polyvinyl alcohol (P), chitosan (CH), collagen (C), and honey (H) to produce nanofibrous membranes with healing properties. The honey effect at concentrations of 0 % (PCH and PCHC), 5 % (PCHC-5H), 10 % (PCHC-10H), and 15 % (PCHC-15H) on the physicochemical, antibacterial, and biological properties of the developed nanofibers was investigated. Morphological analysis by SEM demonstrated that PCH and PCHC nanofibers had a uniform and homogeneous distribution on their surfaces. However, the increase in honey content increased the fiber diameter (118.11-420.10) and drastically reduced the porosity of the membranes (15.79-92.62 nm). The addition of honey reduces the water vapor transmission rate (WVTR) and the adsorption properties of the membranes. Mechanical tests revealed that nanofibers were more flexible and elastic when honey was added, specifically the PCHC-15H nanofibers with the lowest modulus of elasticity (15 MPa) and the highest elongation at break (220 %). Also, honey significantly improved the antibacterial efficiency of the nanofibers, mainly PCHC-15H nanofibers, which presented the best bacterial reduction rates against Staphylococcus aureus (59.84 %), Pseudomonas aeruginosa (47.27 %), Escherichia coli (65.07 %), and Listeria monocytogenes (49.58 %). In vitro tests with cell cultures suggest that nanofibers were not cytotoxic and exhibited excellent biocompatibility with human fibroblasts (HFb) and keratinocytes (HaCaT), since all treatments showed higher or similar cell viability as opposed to the cell control. Based on the findings, PVA-chitosan-collagen-honey nanofibrous membranes have promise as an antibacterial dressing substitute.

Immobilization of Horseradish Peroxidase onto Montmorillonite/Glucosamine-Chitosan Composite for Electrochemical Biosensing of Polyphenols.

Glucosamine-chitosan synthesized by the Maillard reaction was combined with montmorillonite to obtain a nanohybrid composite to immobilize horseradish peroxidase. The material combines the advantageous properties of clay with those of the chitosan derivative; has improved water solubility and reduced molecular weight and viscosity; involves an eco-friendly synthesis; and exhibits ion exchange capacity, good adhesiveness, and a large specific surface area for enzyme adsorption. The physicochemical characteristics of the composite were analyzed by infrared spectroscopy and X-ray diffraction to determine clay-polycation interactions. The electrochemical response of the different polyphenols to glassy carbon electrodes modified with the composite was evaluated by cyclic voltammetry. The sensitivity and detection limit values obtained with the biosensor toward hydroquinone, chlorogenic acid, catechol, and resorcinol are (1.6 ± 0.2) × 102 µA mM-1 and (74 ± 8) nM; (1.2 ± 0.1) × 102 µA mM-1 and (26 ± 3) nM; (16 ± 2) µA mM-1 and (0.74 ± 0.09) µM; and (3.7± 0.3) µA mM-1 and (3.3 ± 0.2) µM, respectively. The biosensor was applied to quantify polyphenols in pennyroyal and lemon verbena extracts.

Biofilm Eradication and Inhibition of Methicillin-Resistant Staphylococcus Clinical Isolates by Curcumin-Chitosan Magnetic Nanoparticles.

Biofilm-producing methicillin-resistant Staphylococcus aureus (MRSA) and coagulase-negative staphylococci (MR-CoNS) pose clinical challenges in treating healthcare-associated infections. As alternative antimicrobial options are needed, in this study, we aimed to determine the effect of curcumin-chitosan magnetic nanoparticles (Cur-Chi-MNP) on the biofilms of staphylococcal clinical isolates. MRSA and CoNS clinical isolates were identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Antimicrobial susceptibility testing was performed using the broth microdilutions. Nanoparticles were synthesized by the co-precipitation of magnetic nanoparticles (MNP) and encapsulated by the ionotropic gelation of curcumin (Cur) and chitosan (Chi). Biofilm inhibition and eradication by nanoparticles, with and without the addition of oxacillin (OXA), were assessed in Staphylococcus strains. Cur-Chi-MNP showed antimicrobial activity against planktonic cells of MRSA and MR-CoNS strains and inhibited MRSA biofilm. The addition of OXA to Cur-Chi-MNP increased the biofilm inhibition and eradication activity against all staphylococcal strains (P = 0.0007), and higher biofilm activity was observed in the early biofilm stages. Cur-Chi-MNP showed antimicrobial and biofilm inhibitory activities against S. aureus. Addition of OXA increased biofilm inhibition and eradication activity against all staphylococcal strains. A combination treatment of Cur-Chi-MNP and OXA could potentially be used to treat staphylococcal biofilm-associated infections in the early stages before the establishment of biofilm bacterial cells.

Assessing the reinforcement effect by response surface methodology of holocellulose from spent coffee grounds on biopolymeric films as food packaging materials.

The pollution caused by petroleum-derived plastic materials has become a major environmental problem that has encouraged the development of new compostable and environmentally friendly materials for food packaging based on biomodified polymers with household residues. This study aims to design, synthesize, and characterize a biobased polymeric microstructure film from polyvinyl alcohol and chitosan reinforced with holocellulose from spent coffee grounds for food-sustainable packaging. Chemical isolation with a chlorite-based solution was performed to obtain the reinforced holocellulose from the spent coffee ground, and the solvent casting method was used to obtain the films to study. Physicochemical and microscopic characterizations were conducted to identify and select the best formulations using a simplex-centroid design analysis. The response surface methodology results indicate that the new packaging material obtained with equal amounts of polymers and reinforced material (1:1:1) possesses the appropriate barrier properties and microstructural character to prevent water attack and hydrophobic behavior and thus could be used as an alternative for food packaging materials.

Stabilization of ß-D-galactosidase in solution containing chitosan-based membrane: Central composite rotatable design.

ß-D-galactosidase is a hydrolase enzyme capable of hydrolyzing lactose in milk-based foods. Its free form can be inactivated in solution during the production of low-dosage lactose foods. Then, it is important to study strategies for avoiding the free enzyme inactivation with the aim of circumventing this problem. The stabilization of ß-D-galactosidase in aqueous solution after interactions with chitosan/eucalyptus sawdust composite membrane proved to be a potential strategy when optimized by central composite rotatable (CCR) design. In this case, the best experimental conditions for ß-D-galactosidase partitioning and stability in an aqueous medium containing the chitosan-based composite membrane reinforced with eucalyptus sawdust were i) enzyme/buffer solution ratio of 0.0057, ii) pH 5.6, iii) membrane mass of 50 mg, and iv) temperature lower than 37 °C. Significance was found for the linear enzyme/buffer solution ratio, linear temperature, and quadratic pH (p < 0.05) in the interval between 0 and 60 min of study. In the interval between 60 and 120 min, there was significance (p < 0.12) for linear temperature, the temperature-enzyme/buffer solution ratio interaction and the interaction between linear pH and linear enzyme/buffer solution ratio. The Pareto charts and response surfaces clearly showed all the effects of the experimental variables on the stabilization of ß-D-galactosidase in solution after interactions with the chitosan composite membrane. In this case, industrial food reactors covered with chitosan/eucalyptus sawdust composite membrane could be a strategy for the hydrolysis of lactose during milk-producing processes.

Evaluating antimicrobial, cytotoxic and immunomodulatory effects of glass ionomer cement modified by chitosan and hydroxyapatite.

OBJECTIVES: This study aimed to assess antimicrobial efficacy, cytotoxicity, and cytokine release (IL-1b, IL-6, IL-10, TNF-α) from human dental pulp stem cells (hDPSCs) of chitosan (CH) and hydroxyapatite (HAp)-modified glass ionomer cements (GIC). METHODS: GICs with varied CH and HAp concentrations (0 %, 0.16 %, 2 %, 5 %, 10 %) were tested against S. mutans for 24 h or 7 days. Antimicrobial activity was measured using an MTT test. Cytotoxicity evaluation followed for optimal concentrations, analyzing mitochondrial activity and apoptosis in hDPSCs. Cytokine release was assessed with MAGPIX. Antimicrobial analysis used Shapiro-Wilk, Kruskal-Wallis, and Dunnett tests. Two-way ANOVA, Tukey, and Dunnett tests were applied for hDP metabolism and cytokine release. RESULTS: CH 2 % and HAp 5 % significantly enhanced GIC antimicrobial activity, especially after seven days. In immediate analysis, all materials showed reduced mitochondrial activity compared to the control. After 24 h, CH demonstrated mitochondrial metabolism similar to the control. All groups exhibited mild cytotoxicity (∼30 % cell death). Only IL-6 was influenced, with reduced release in experimental groups. SIGNIFICANCE: CH 2 % and HAp 5 % were most effective for antibacterial effects. GIC-CH 2 % emerged as the most promising formula, displaying significant antibacterial effects with reduced hDPSC toxicity.

Design of an antioxidant powder additive based on carvacrol encapsulated into a multilayer chitosan-alginate-maltodextrin emulsion.

Carvacrol has demonstrated antioxidant activity; however, its high volatility and low water solubility limit its direct application in food matrices. Then, an effective encapsulation system is required to protect it. This study aimed to design and characterize a carvacrol-based additive encapsulated in a spray-dried multilayer emulsion based on chitosan/sodium alginate/maltodextrin. Spray-drying temperature of 120 °C and 3 %(w/w) maltodextrin content maximized both encapsulation efficiency (~97 %) and loading capacity (~53 %). The powder's antioxidant properties were evaluated in two food simulant media: water (SiW) and water-ethanol (SiD). The highest antioxidant activity was observed in SiW for both ABTS•+ (8.2 ± 0.3mgEAG/g) and FRAP (4.1 ± 0.2mgEAG/g) methods because of the reduced release of carvacrol in SiD vs. SiW, as supported by micro- and macrostructural observations by SAXS and microscopy, respectively. An increase from 143 to 157 °C attributable to carvacrol protection and Tg = 44.4 °C (> ambient) were obtained by TGA and DSC, respectively. FT-IR confirmed intermolecular interactions (e.g. -COO- and -NH3+) as well as H-bonding formation. High water solubility (81 ± 3 %), low hygroscopicity (8.8 ± 0.2 %(w/w), poor flowability (CI:45 ± 4), and high cohesiveness (HR:1.8 ± 0.1) between particles were achieved, leading to a powdered antioxidant additive with high potential for applications which required avoiding/reducing oxidation on hydrophilic and hydrophobic food products.

Development of biopolymer films loaded with fluconazole and thymol for resistant vaginal candidiasis.

Vulvovaginal candidiasis (VVC) is an opportunistic infection caused by a fungus of the Candida genus, affecting approximately 75 % of women during their lifetime. Fungal resistance cases and adverse effects have been the main challenges of oral therapies. In this study, the topical application of thin films containing fluconazole (FLU) and thymol (THY) was proposed to overcome these problems. Vaginal films based only on chitosan (CH) or combining this biopolymer with pectin (PEC) or hydroxypropylmethylcellulose acetate succinate (HPMCAS) were developed by the solvent casting method. In addition to a higher swelling index, CH/HPMCAS films showed to be more plastic and flexible than systems prepared with CH/PEC or only chitosan. Biopolymers and FLU were found in an amorphous state, contributing to explaining the rapid gel formation after contact with vaginal fluid. High permeability rates of FLU were also found after its immobilization into thin films. The presence of THY in polymer films increased the distribution of FLU in vaginal tissues and resulted in improved anti-Candida activity. A significant activity against the resistant C. glabrata was achieved, reducing the required FLU dose by 50 %. These results suggest that the developed polymer films represent a promising alternative for the treatment of resistant vulvovaginal candidiasis, encouraging further studies in this context.

Hydrogel composites based on chitosan and CuAuTiO2 photocatalysts for hydrogen production under simulated sunlight irradiation.

This study explored the photocatalytic hydrogen evolution reaction (HER) using novel biohydrogel composites comprising chitosan, and a photocatalyst consisting in TiO2 P25 decorated with Au and/or Cu mono- and bimetallic nanoparticles (NPs) to boost its optical and catalytic properties. Low loads of Cu and Au (1 mol%) were incorporated onto TiO2 via a green photodeposition methodology. Characterization techniques confirmed the incorporation of decoration metals as well as improvements in the light absorption properties in the visible light interval (λ > 390 nm) and electron transfer capability of the semiconductors. Thereafter, Au and/or Cu NP-supported TiO2 were incorporated into chitosan-based physically crosslinked hydrogels revealing significant interactions between chitosan functional groups (hydroxyls, amines and amides) with the NPs to ensure its encapsulation. These materials were evaluated as photocatalysts for the HER using water and methanol mixtures under simulated sunlight and visible light irradiation. Sample CuAuTiO2/ChTPP exhibited a maximum hydrogen generation of 1790 µmol g-1 h-1 under simulated sunlight irradiation, almost 12-folds higher compared with TiO2/ChTPP. Also, the nanocomposites revealed a similar tendency under visible light with a maximum hydrogen production of 590 µmol g-1 h-1. These results agree with the efficiency of photoinduced charge separation revealed by transient photocurrent and EIS.

Acryloyl chitosan as a macro-crosslinker for freezing-resistant, self-healing and self-adhesive ionogels-based multicompetent flexible sensors.

Here, a polysaccharide derivative acryloyl chitosan (AcCS) is exploited as macro-crosslinker to synthesize a novel ionogel poly (acrylic acid-co-1-Vinyl-3-butyl imidazolium chloride) (AA-IL/AcCS) via a one-pot method. AcCS provides abundant physical and chemical crosslinking sites contributing to the high mechanical stretchability (elongation at break 600 %) and strength (tensile strength 137 kPa) of AA-IL/AcCS. The high-density of dynamic bonds (hydrogen bonds and electrostatic interactions) in the network of ionogels enables self-healing and self-adhesive features of AA-IL/AcCS. Meanwhile, AA-IL/AcCS exhibits high ionic conductivity (0.1 mS/cm) at room temperature and excellent antifreeze ability (-58 °C). The AA-IL/AcCS-based sensor shows diverse sensory capabilities towards temperature and humidity, moreover, it could precisely detect human motions and handwritings signals. Furthermore, AA-IL/AcCS exhibits excellent bactericidal properties against both gram-positive and gram-negative bacteria. This work opens the possibility of polysaccharides as a macro-crosslinkers for preparing ionogel-based sensors for wearable electronics.

Platelet-rich fibrin (PRF) modified nano-hydroxyapatite/chitosan/gelatin/alginate scaffolds increase adhesion and viability of human dental pulp stem cells (DPSC) and osteoblasts derived from DPSC.

Bone tissue regeneration strategies have incorporated the use of natural polymers, such as hydroxyapatite (nHA), chitosan (CH), gelatin (GEL), or alginate (ALG). Additionally, platelet concentrates, such as platelet-rich fibrin (PRF) have been suggested to improve scaffold biocompatibility. This study aimed to develop scaffolds composed of nHA, GEL, and CH, with or without ALG and lyophilized PRF, to evaluate the scaffold's properties, growth factor release, and dental pulp stem cells (DPSC), and osteoblast (OB) derived from DPSC viability. Four scaffold variations were synthesized and lyophilized. Then, degradation, swelling profiles, and morphological analysis were performed. Furthermore, PDGF-BB and FGF-B growth factors release were quantified by ELISA, and cytotoxicity and cell viability were evaluated. The swelling and degradation profiles were similar in all scaffolds, with pore sizes ranging between 100 and 250 µm. FGF-B and PDGF-BB release was evidenced after 24 h of scaffold immersion in cell culture medium. DPSC and OB-DPSC viability was notably increased in PRF-supplemented scaffolds. The nHA-CH-GEL-PRF scaffold demonstrated optimal physical-biological characteristics for stimulating DPSC and OB-DPSC cell viability. These results suggest lyophilized PRF improves scaffold biocompatibility for bone tissue regeneration purposes.