Novel Payloads to Mitigate Maladaptive Inward Arterial Remodeling in Drug-Coated Balloon Therapy.

Drug-coated balloon therapy is a minimally invasive endovascular approach to treat obstructive arterial disease, with increasing utilization in the peripheral circulation due to improved outcomes as compared to alternative interventional modalities. Broader clinical use of drug-coated balloons is limited by an incomplete understanding of device- and patient-specific determinants of treatment efficacy, including late outcomes that are mediated by postinterventional maladaptive inward arterial remodeling. To address this knowledge gap, we propose a predictive mathematical model of pressure-mediated femoral artery remodeling following drug-coated balloon deployment, with account of drug-based modulation of resident vascular cell phenotype and common patient comorbidities, namely, hypertension and endothelial cell dysfunction. Our results elucidate how postinterventional arterial remodeling outcomes are altered by the delivery of a traditional anti-proliferative drug, as well as by codelivery with an anti-contractile drug. Our findings suggest that codelivery of anti-proliferative and anti-contractile drugs could improve patient outcomes following drug-coated balloon therapy, motivating further consideration of novel payloads in next-generation devices.

Effect of Cissus quadrangularis Hydrogel on Enhancing Osseointegration of Titanium Implant to Bone: An In Vivo Study.

AIM: The aim of the study was to evaluate the osteogenic potential of Cissus quadrangularis (CQ) hydrogel in enhancing the osseointegration of titanium to the bone in an experimental rabbit model. MATERIALS AND METHODS: Six adult male New Zealand white rabbits were used in this study. A total of 24 implants (12 coated test implants and 12 uncoated control implants) were placed in these 6 rabbits. A polyethylene glycol (PEG) hydrogel was prepared with the C. quadrangularis hydrogel in which the test implants were coated. Each rabbit was operated on both hind legs and one implant, each, was placed in the femur and tibia. Hence, one rabbit received four implants [two test implants (HG coated) and two control implants (uncoated)]. The animals were sacrificed after 4 weeks, and the specimens were histomorphometrically analyzed. The bone-to-implant contact (BIC) and the bone area fraction occupancy (BAFO) were calculated using Image J analysis. RESULTS: The statistically analyzed values which were obtained by paired t-test, revealed that the average mean values were higher in the test implants (coated) than the control implants (uncoated). The BIC values of the test implants were not significantly different from the control implants in the case of both femur and tibia (p >0.05). The test implants showed significantly increased BAFO values in femur (p <0.05). However, the BAFO values of test implants in tibia did not vary significantly from the control implants. CONCLUSION: Based on the findings of the study, the authors conclude that the coating of C. quadrangularis hydrogel enhances the osseointegration of titanium implants to bone. The further studies need to be designed to check the osseointegrative potential of C. quadrangularis. CLINICAL SIGNIFICANCE: The findings of this study suggest that the C. quadrangularis hydrogel is a potent osteogenic material that can reduce the osseointegration period and thus enhance the patient compliance toward implant treatment.

Antimicrobial coating strategy to prevent orthopaedic device-related infections: recent advances and future perspectives.

The rapid development of multidrug-resistant (MDR) bacteria and biofilm-related infections (BRIs) has urgently called for new strategies to combat severe orthopaedic device-related infections (ODRIs). Antimicrobial coating has emerged as a promising strategy in halting the incidence of ODRIs and treating ODRIs in long term. With the advancement of material science and biotechnology, numerous antimicrobial coatings have been reported in literature, showing superior antimicrobial and osteogenic functions. This review has specifically discussed the currently developed antimicrobial coatings in the perspective of drug release from the coating system, focusing on their realization of controlled and on demand antimicrobial agents release, as well as multi-functionality. Acknowledging the multidisciplinary nature of antimicrobial coating, the conceptual design, the deposition method and the therapeutic effect of the antimicrobial coatings have been described in detail and discussed critically. Particularly, the challenges and opportunities on the way toward the clinical translation of antimicrobial coatings have been highlighted.

Development of Silver-Containing Hydroxyapatite-Coated Antimicrobial Implants for Orthopaedic and Spinal Surgery.

The prevention of surgical site infections is directly related to the minimization of surgical invasiveness, and is in line with the concept of minimally invasive spine therapy (MIST). In recent years, the incidence of postoperative infections has been increasing due to the increased use of spinal implant surgery in patients at high risk of infection, including the elderly and easily infected hosts, the limitations of poor bone marrow transfer of antibiotics, and the potential for contamination of surgical gloves and instruments. Thus, the development of antimicrobial implants in orthopedic and spinal surgery is becoming more and more popular, and implants with proven antimicrobial, safety, and osteoconductive properties (i.e., silver, iodine, antibiotics) in vitro, in vivo, and in clinical trials have become available for clinical use. We have developed silver-containing hydroxyapatite (Ag-HA)-coated implants to prevent post-operative infection, and increase bone fusion capacity, and have successfully commercialized antibacterial implants for hip prostheses and spinal interbody cages. This narrative review overviews the present status of available surface coating technologies and materials; describes how the antimicrobial, safety, and biocompatibility (osteoconductivity) of Ag-HA-coated implants have been demonstrated for commercialization; and reviews the clinical use of antimicrobial implants in orthopedic and spinal surgery, including Ag-HA-coated implants that we have developed.

Sustainable Antibacterial and Anti-Inflammatory Silk Suture with Surface Modification of Combined-Therapy Drugs for Surgical Site Infection.

Silk sutures with antibacterial and anti-inflammatory functions were developed for sustained dual-drug delivery to prevent surgical site infections (SSIs). The silk sutures were prepared with core-shell structures braided from degummed silk filaments and then coated with a silk fibroin (SF) layer loaded with berberine (BB) and artemisinin (ART). Both the rapid release of drugs to prevent initial biofilm formation and the following sustained release to maintain effective concentrations for more than 42 days were demonstrated. In vitro assays using human fibroblasts (Hs 865.Sk) demonstrated cell proliferation on the materials, and hemolysis was 2.4 ± 0.8%, lower than that required by ISO 10993-4 standard. The sutures inhibited platelet adhesion and promoted collagen deposition and blood vessel formation. In vivo assessments using Sprague-Dawley (SD) rats indicated that the coating reduced the expression of pro-inflammatory cytokines interleukin-10 (IL-10) and tumor necrosis factor-α (TNF-α), shortening the inflammatory period and promoting angiogenesis. The results demonstrated that these new sutures exhibited stable structures, favorable biocompatibility, and sustainable antibacterial and anti-inflammatory functions with potential for surgical applications.

Application of drug-coated balloons for intracranial atherosclerosis disease: a systematic review.

BACKGROUND: Although percutaneous transluminal angioplasty and stenting (PTAS) was an effective and safe alternative treatment for severe intracranial atherosclerosis disease (ICAD), the high rate of restenosis remained a major issue for this endovascular procedure. Recently, the application of drug-coated balloons (DCB) in ICAD was developed to reduce restenosis. This systematic review aimed to evaluate the efficacy and safety of DCB angioplasty for ICAD. METHODS: We searched relevant databases for eligible studies enrolling ICAD patients treated with DCB. The event rates of restenosis and periprocedural complications in the follow-up period were pooled with random-/fixed-effect models using Freeman-Tukey double arcsine transformation. Heterogeneity tests and publication bias tests were performed. RESULTS: Two hundred and twenty-four ICAD patients treated with DCB from 9 eligible studies were included. Rate of stenosis in the DCB arm before treatment was ranged from 62% to 90% and reported median follow-up was ranged from 3 to 10.7 months. The pooled incidence of restenosis were 5.7% (95% confidence interval [CI] 2.6%-9.7%; I2 = 0%, p = 0.516) and 5.9% for periprocedural complications (95% CI: 2.5-10.3%; I2 = 0%, p = 0.649) in follow-up term. CONCLUSION: With the limitation of the low quality of the available evidence, angioplasty with DCB appears to be effective and safe in severe ICAD. Further larger randomized trials are needed to provide more definitive evidence and to address the ideal clinical context for their application.

Universal Antifouling and Photothermal Antibacterial Surfaces Based on Multifunctional Metal-Phenolic Networks for Prevention of Biofilm Formation.

Biofilms formed from the pathogenic bacteria that attach to the surfaces of biomedical devices and implantable materials result in various persistent and chronic bacterial infections, posing serious threats to human health. Compared to the elimination of matured biofilms, prevention of the formation of biofilms is expected to be a more effective way for the treatment of biofilm-associated infections. Herein, we develop a facile method for endowing diverse substrates with long-term antibiofilm property by deposition of a hybrid film composed of tannic acid/Cu ion (TA/Cu) complex and poly(ethylene glycol) (PEG). In this system, the TA/Cu complex acts as a multifunctional building block with three different roles: (i) as a versatile "glue" with universal adherent property for substrate modification, (ii) as a photothermal biocidal agent for bacterial elimination under irradiation of near-infrared (NIR) laser, and (iii) as a potent linker for immobilization of PEG with inherent antifouling property to inhibit adhesion and accumulation of bacteria. The resulted hybrid film shows negligible cytotoxicity and good histocompatibility and could prevent biofilm formation for at least 15 days in vitro and suppress bacterial infection in vivo, showing great potential for practical applications to solve the biofilm-associated problems of biomedical materials and devices.

Vascular transplantation with dual-biofunctional ePTFE vascular grafts in a porcine model.

Cardiovascular disease (CVD) poses serious health concerns worldwide. The lack of transplantable vascular grafts is an unmet clinical need in the surgical treatment of CVD. Although expanded polytetrafluoroethylene (ePTFE) vascular grafts have been used in clinical practice, a low long-term patency rate in small-diameter transplantation application is still the biggest challenge. Thus, surface modification of ePTFE is sought after. In this study, polydopamine (PDA) was used to improve the hydrophilia and provide immobilization sites in ePTFE. Bivalirudin (BVLD), a direct thrombin inhibitor, was used to enhance the anti-thrombotic activity of ePTFE. The peptides derived from extracellular matrix proteins were used to elevate the bioactivity of ePTFE. The morphology, chemical composition, peptide modified strength, wettability, and hemocompatibility of modified ePTFE vascular grafts were investigated. Then, an endothelial cell proliferation assay was used to evaluate the best co-modification strategy of the ePTFE vascular graft in vitro. Since a large animal could relatively better mimic human physiology, we chose a porcine carotid artery replacement model in the current study. The results showed that the BVLD/REDV co-modified ePTFE vascular grafts had a satisfactory patency rate (66.7%) and a higher endothelial cell coverage ratio (70%) at 12 weeks after implantation. This may offer an opportunity to produce a multi-biofunctional ePTFE vascular graft, thereby yielding a potent product to meet the clinical needs.

Antishear Therapy for Stevens-Johnson Syndrome and Toxic Epidermal Necrolysis: A Follow-up Study.

Stevens-Johnson syndrome and toxic epidermal necrolysis (SJS/TEN) are life-threatening conditions best approached with multidisciplinary burn-equivalent care. There is a lack of consensus on wound management, in particular, whether to debride detached epidermis. Our center instituted "antishear" wound therapy 35 years ago, where detached skin is left in situ as a biologic dressing and a standardized protocol avoids shear forces to prevent further desquamation. Our center's initial results showed outcomes comparable to SCORTEN predictions, but advancements in burn critical care necessitate a reevaluation of the antishear approach. A retrospective chart review was conducted for all patients admitted between June 2004 and May 2020 with a dermatologist-confirmed diagnosis of SJS/TEN (N = 51). All patients were treated with burn-equivalent critical care and antishear wound therapy. Standardized mortality ratios were calculated using the established SCORTEN, and newly developed ABCD-10, prediction models. Mean SCORTEN, ABCD-10, and %TBSA were 2.6, 2.0, and 28%. Overall mortality was 22%; SCORTEN score (P < .001), ABCD-10 score (P < .01), %TBSA involved (P = .02), and development of multisystem organ failure (P < .001) correlated with increased mortality. Cohort-wide standardized mortality based on ABCD-10 was 1.18 (P = .79). Standardized mortality based on SCORTEN was 0.62 (P = .20) and 0.77 (P = .15) for patients with scores ≤3 and >3; across the cohort it was 0.71 (P = .11), representing a 29% mortality reduction. Incorporating the antishear approach as part of burn-equivalent care for SJS/TENs led to outcomes comparable to those predicted for surgical debridement via SCORTEN. However, the antishear approach has the advantage of avoiding painful dressing changes, sedation, and general anesthesia required for surgical debridement.

Immune checkpoint programmed death-1 mediates abdominal aortic aneurysm and pseudoaneurysm progression.

PURPOSE: The causes and pathogenetic mechanisms underlying abdominal aortic aneurysms (AAAs) and pseudoaneurysms are not fully understood. We hypothesized that inhibiting programmed death-1 (PD-1) can decrease AAA and pseudoaneurysm formation in mouse and rat models. METHODS: Human AAA samples were examined in conjunction with an adventitial calcium chloride (CaCl2) application mouse model and an aortic patch angioplasty rat model. Single-dose PD-1 antibody (4 mg/kg) or BMS-1 (PD-1 inhibitor-1) (1 mg/kg) was administered by intraperitoneal (IP) or intraluminal injection. In the intramural injection group, PD-1 antibody was injected after CaCl2 incubation. The rats were divided into three groups: (1) the control group was only decellularized without other special treatment, (2) the PD-1 antibody-coated patch group, and (3) the BMS-1 coated patch group. Patches implanted in the rat abdominal aorta were harvested on day 14 after implantation and analyzed. RESULTS: Immunohistochemical analysis showed PD-1-positive cells, PD-1 and CD3, PD-1 and CD68, and PD-1 and α-actin co-expressed in the human AAA samples. Intraperitoneal (IP) injection or intraluminal injection of PD-1antibody/BMS-1 significantly inhibited AAA progression. PD-1 antibody and BMS-1 were each successfully conjugated to decellularized rat thoracic artery patches, respectively, by hyaluronic acid. Patches coated with either humanized PD-1 antibody or BMS-1 can also inhibit pseudoaneurysm progression and inflammatory cell infiltration. CONCLUSION: PD-1 pathway inhibition may be a promising therapeutic strategy for inhibiting AAA and pseudoaneurysm progression.

Synthesis and in vitro preliminary evaluation of prostate-specific membrane antigen targeted upconversion nanoparticles as a first step towards radio/fluorescence-guided surgery of prostate cancer.

Over the last decade, upconversion nanoparticles (UCNP) have been widely investigated in nanomedicine due to their high potential as imaging agents in the near-infrared (NIR) optical window of biological tissues. Here, we successfully develop active targeted UCNP as potential probes for dual NIR-NIR fluorescence and radioactive-guided surgery of prostate-specific membrane antigen (PSMA)(+) prostate cancers. We designed a one-pot thermolysis synthesis method to obtain oleic acid-coated spherical NaYF4:Yb,Tm@NaYF4 core/shell UCNP with narrow particle size distribution (30.0 ± 0.1 nm, as estimated by SAXS analysis) and efficient upconversion luminescence. Polyethylene glycol (PEG) ligands bearing different anchoring groups (phosphate, bis- and tetra-phosphonate-based) were synthesized and used to hydrophilize the UCNP. DLS studies led to the selection of a tetra-phosphonate PEG(2000) ligand affording water-dispersible UCNP with sustained colloidal stability in several aqueous media. PSMA-targeting ligands (i.e., glutamate-urea-lysine derivatives called KuEs) and fluorescent or radiolabelled prosthetic groups were grafted onto the UCNP surface by strain-promoted azide-alkyne cycloaddition (SPAAC). These UCNP, coated with 10 or 100% surface density of KuE ligands, did not induce cytotoxicity over 24 h incubation in LNCaP-Luc or PC3-Luc prostate cancer cell lines or in human fibroblasts for any of the concentrations evaluated. Competitive binding assays and flow cytometry demonstrated the excellent affinity of UCNP@KuE for PSMA-positive LNCaP-Luc cells compared with non-targeted UCNP@CO2H. Furthermore, the binding of UCNP@KuE to prostate tumour cells was positively correlated with the surface density of PSMA-targeting ligands and maintained after 125I-radiolabelling. Finally, a preliminary biodistribution study in LNCaP-Luc-bearing mice demonstrated the radiochemical stability of non-targeted [125I]UCNP paving the way for future in vivo assessments.

Antibacterial Polysiloxane Polymers and Coatings for Cochlear Implants.

Within this study, new materials were synthesized and characterized based on polysiloxane modified with different ratios of N-acetyl-l-cysteine (NAC) and crosslinked via UV-assisted thiol-ene addition, in order to obtain efficient membranes able to resist bacterial adherence and biofilm formation. These membranes were subjected to in vitro testing for microbial adherence against S. pneumoniae using standardized tests. WISTAR rats were implanted for 4 weeks with crosslinked siloxane samples without and with NAC. A set of physical characterization methods was employed to assess the chemical structure and morphological aspects of the new synthetized materials before and after contact with the microbiological medium.

Chimeric Peptides Quickly Modify the Surface of Personalized 3D Printing Titanium Implants to Promote Osseointegration.

Titanium (Ti) and titanium alloys have been widely used in the field of biomedicine. However, the unmatched biomechanics and poor bioactivities of conventional Ti implants usually lead to insufficient osseointegration. To tackle these challenges, it is critical to develop a novel Ti implant that meets the bioadaptive requirements for load-bearing critical bone defects. Notably, three-dimensional (3D)-printed Ti implants mimic the microstructure and mechanical properties of natural bones. Additionally, eco-friendly techniques based on inorganic-binding peptides have been applied to modify Ti surfaces. Herein, in our study, Ti surfaces were modified to reinforce osseointegration using chimeric peptides constructed by connecting W9, RP1P, and minTBP-1 directly or via (GP)4, respectively. PR1P is derived from the extracellular VEGF-binding domain of prominin-1, which increases the expression of VEGF and promotes the binding of VEGF to endothelial cells, thereby accelerating angiogenesis. W9 induces osteoblast differentiation in bone marrow mesenchymal stem cells and human mesenchymal stem cells to promote bone formation. Overall, chimeric peptides promote osseointegration by promoting angiogenesis and osteogenesis. Additionally, chimeric peptides with P3&4 were more effective than those with P1&2 in improving osseointegration, which might be ascribed to the capacity of P3&4 to provide a greater range for chimeric peptides to express their activity. This work successfully used chimeric peptides to modify 3D-Ti implant surfaces to improve osseointegration on the implant-bone surface.

Clinical Outcomes of Self-Made Polyurethane-Covered Stent Implantation for the Treatment of Coronary Artery Perforations.

OBJECTIVES: The present study aimed to investigate the short- and long-term clinical outcomes of self-made polyurethane-covered stents (PU-CS) in patients for the management of coronary artery perforation (CAP) during percutaneous coronary intervention (PCI). BACKGROUND: Coronary artery perforation is reckoned as a serious complication in PCI and associated with considerable morbidity and mortality. Covered stents have been used for treating the life-threatening CAP during PCI. But in some catheterization laboratories, no commercial CS is immediately available when there is an urgent need for CS to rescue the coronary rupture site. METHODS: We retrospectively identified 24 patients who underwent 31 self-made PU-CS implantations due to CAP in Zhongshan Hospital, Fudan University, from June 2015 to January 2020. RESULTS: The total procedural success rate of CS to seal the perforation was 79.2%. Nine patients (37.5%) developed cardiac tamponade, of which 8 patients (33.3%) underwent pericardiocentesis and 4 patients (16.7%) underwent cardiac surgeries. Except for 4 cardiac death cases (16.7%), none of myocardial infarction (MI), target lesion revascularization (TLR), and stent thrombosis (ST) was reported during hospital stay. Data from 22 patients (91.7%) were available at 610.4 ± 420.9 days of follow-up. Major adverse cardiac events (MACE) occurred in 6 patients (27.3%), including 5 cases of cardiac death and one TLR case. CONCLUSIONS: Self-made PU-CS demonstrates high rates of successful delivery and sealing of severe CAP during PCI. Although the in-hospital mortality remains high after PU-CS implantation, the long-term follow-up shows favorable clinical outcomes, indicating the feasibility of PU-CS in treating CAP.

Chitosan-glucuronic acid conjugate coated mesoporous silica nanoparticles: A smart pH-responsive and receptor-targeted system for colorectal cancer therapy.

Glycosylated pH-sensitive mesoporous silica nanoparticles (MSNs) of capecitabine (CAP) were developed for targeting colorectal cancer. The MSNs possessed an average pore diameter of 8.12 ± 0.43 nm, pore volume of 0.73 ± 0.21 cm3/g, and particle size of 245.24 ± 5.75 nm. A high loading of 180.51 ± 5.23 mg/g attributed to the larger pore volume was observed. The surface of the drug-loaded MSNs were capped with chitosan-glucuronic acid (CHS-GCA) conjugate to combine two strategies viz. pH-sensitive, and lectin receptor mediated uptake. In vitro studies demonstrated a pH-sensitive and controlled release of CAP which was further enhanced in the presence of rat caecal content. Higher uptake of the (CAP-MSN)CHS-GCA was observed in HCT 116 cell lines. The glycosylated nanoparticles revealed reduction in the tumors, aberrant crypt foci, dysplasia and inflammation, and alleviation in the toxic features. This illustrated that the nanoparticles showed promising antitumor efficacy with reduced toxicity and may be used as a effective carrier against cancer.

The Translation from In Vitro Bioactive Ion Concentration Screening to In Vivo Application for Preventing Peri-implantitis.

Peri-implantitis is a typical pathological condition characterized by the destructive inflammation in the soft tissue and the progressive loss of supporting bones. As the current effective treatments and preventive measures are inconsistent and unpredictable, the use of biomaterials as carriers of bioactive ion coatings is a promising approach. However, the translation from lab to large-scale production and clinical applications is difficult due to a technology barrier. Determining the effective dosage of each ion to achieve an in vivo application of the in vitro screening is challenging. Here, we selected zinc and strontium ions to provide multiple effects on antibacterial activity and osteogenesis. The optimal coating with effective release concentrations of the two ions was obtained after the two-step screening from in vitro testing. The results showed that this type of in vivo bioactive ion usage leads to an enhanced osseointegration during the immediate implantation in a periodontitis-affected environment and prevents soft tissue inflammation and bone resorption in an inflammatory environment. The new biologically active ion screening method could verify the effectiveness of this clinical translation and its potential for large-scale production and could determine the effective dosage of each ion for a specific application.

No clinical difference between TiN-coated versus uncoated cementless CoCrMo mobile-bearing total knee arthroplasty; 10-year follow-up of a randomized controlled trial.

PURPOSE: Improvement of biomechanical properties of cobalt-chromium-molybdenum (CoCrMo) implant surface and reduction of adhesive wear is achieved by titanium-nitride (TiN) coating in vitro. Less pain, higher postoperative outcome scores and a lower revision rate after TKA with a TiN-coated CoCrMo TKA compared with uncoated CoCrMo TKA after 10-year follow-up was hypothesized. METHODS: In a double-blinded RCT, 101 patients received a cementless mobile-bearing CoCrMo TKA, either TiN-coated or uncoated. The primary outcome measure was the visual analogue scale (VAS) score for pain and secondary outcome measures were the Knee Society Score (KSS), Oxford Knee Score (OKS), revision rate and adverse events. Patients were assessed at 6 weeks, 6 months, 1 year, 5 years and 10 years, postoperatively. RESULTS: 68 patients (67%) were available for 10-year follow-up. No difference was found in any of the assessed outcome measures with a mean decrease in VAS score (31.6 ± 22.9) and a mean increase in OKS (10.9 ± 8.4), KSS (29.3 ± 31.4), KSSK (26.4 ± 18.2) and KSSF (4.1 ± 22.9). Overall revision rate was 7% (coated 6% vs uncoated 8%) without additional revision procedures between 5 and 10-year follow-up. CONCLUSIONS: The in vitro potential benefits of TiN coating did not result in better clinical outcome when compared to an uncoated cementless TKA. Pain, functional outcome and revision rates were comparable after 10-year follow-up. TiN-coated cementless TKA provides comparable good long-term results, similar to uncoated cementless CoCrMo TKA. LEVEL OF EVIDENCE: Level 1, Therapeutic Study NETHERLANDS TRIAL REGISTER: NL2887/NTR3033.

Preliminary clinical results of coated porous tibia cones in septic and aseptic revision knee arthroplasty.

PURPOSE: To analyze the first results of calcium-phosphate-coated porous tibia cones. METHODS: Patients treated with TrabecuLink®-CaP Cones were retrospectively recruited from January 2016 to December 2017. These custom-made cones were produced using titanium alloy Ti-6Al-4 V (Tilastan®) and using additive manufacturing with a special calcium-phosphate coating (HX®-coating). Clinical outcome was evaluated using Oxford Knee Score. For radiological evaluation of the implants, patients sent us outpatient taken radiographs. A minimum follow-up of one year was required. Lastly, we analyzed postoperative complications and revision rates. RESULTS: 52 patients with revision knee arthroplasty (RKA) were recruited for final analysis, of whom, we had 17 septic RKAs (33%) and 35 aseptic cases of RKA (67%). The bone defects were grouped into 17 AORI Type 2A (32.7%), 14 Type 2B (26.9%) and 21 Type 3 (40.4%). After a mean follow-up of 22 months (13.2-34.8; SD = ± 10), we had 4 surgical revisions (7.7%), 2 septic and 2 aseptic cases. The mean Oxford Knee Score was 28.6 points (8-47; SD = ± 10). 22 of 28 radiographs (78.6%) showed regular positioning of the cones and TKAs at a mean follow-up of 16.8 months (13.2-34.8; SD = ± 6). Three patients (10.7%) showed slight radiolucencies in the bone-cement interfaces and 3 patients (10.7%) had beginning heterotopic ossifications. CONCLUSIONS: This study shows the initial clinical results of calcium-phosphate-coated tibia cones showing a good functional outcome. Further research should focus on long-term clinical and radiological follow-up.

Treatment of Partial Thickness Burns: A Prospective, Randomized Controlled Trial Comparing Four Routinely Used Burns Dressings in an Ambulatory Care Setting.

This prospective, randomized controlled trial study compared the effects of four dressings for adult partial thickness burns, focusing on re-epithelialization time and cost effectiveness. Adults with partial thickness burns meeting inclusion criteria were randomized to either Biobrane™, Acticoat™, Mepilex® Ag, or Aquacel® Ag. Primary endpoint for analysis was >95% re-epithelialization. Incremental cost-effectiveness ratios were calculated based on dressing costs. Dominance probabilities between treatment arms were calculated from bootstrap resampling trial data. One hunderd thirty-one partial thickness burn wounds in 119 patients were randomized. Adjusting for sex, age, smoking status, burn mechanism, TBSA, and first aid adequacy, Mepilex® Ag had a reduced time to re-epithelialization compared to Biobrane™ (IRR: 1.26; 95% CI: 1.07-1.48, P < .01). Economic analysis showed that there was a 99%, 71%, and 53% probability that Mepilex® Ag dominated (cheaper and more effective) Biobrane™, Acticoat™, and Aquacel® Ag, respectively. Mepilex® Ag achieved faster re-epithelialization and better cost effectiveness. Patient satisfaction and comfort seems better with Biobrane™ although not reflected within the end outcome of the healed wound. It is the patients' (after extensive education) and clinicians' choice, level of experience, and availability of products in praxis that will guide the decision as to which the product is used individually on which patient.

Intraocular Lens with Mussel-Inspired Coating for Preventing Posterior Capsule Opacification via Photothermal Effect.

Phacoemulsification with implantation of intraocular lens (IOLs) has been widely applied as a standard treatment for cataract, which is the leading cause of vision impairment. However, it still remains a critical challenge to prevent posterior capsule opacification (PCO) in terms of postoperative visual quality. Herein, we report IOLs with mussel-inspired coatings for inhibiting lens epithelial cells and then preventing PCO through photothermal conversion effect. The mussel-inspired coatings are deposited on the nonoptical surface areas of IOLs, endowing the modified IOLs with efficient photothermal conversion property. The temperature can be facilely raised to 50-60 °C for the photothermal IOLs (PT-IOLs) by near-infrared (NIR) laser irradiation at a safe intensity of 0.3 W/cm2. These PT-IOLs display high capability of inhibiting lens epithelial cells (LECs) in vitro. Therefore, under routine NIR laser irradiation, New Zealand white rabbits implanted with the PT-IOLs demonstrate significantly lower evaluation of PCO (EPCO) scores than the control groups. The overall results indicate that our PT-IOLs provide a promising choice for the clinical prevention of PCO, thus opening a way to maintain the postoperative visual qualities for cataract patients.