Application of amphiregulin in IVM culture of immature human oocytes and pre-insemination culture for COCs in IVF cycles.

Background: Amphiregulin (AR) is a growth factor that resembles the epidermal growth factor (EGF) and serves various functions in different cells. However, no systematic studies or reports on the role of AR in human oocytes have currently been performed or reported. This study aimed to explore the role of AR in human immature oocytes during in vitro maturation (IVM) and in vitro fertilization (IVF) in achieving better embryonic development and to provide a basis for the development of a pre-insemination culture medium specific for cumulus oocyte complexes (COCs). Methods: First, we examined the concentration of AR in the follicular fluid (FF) of patients who underwent routine IVF and explored the correlation between AR levels and oocyte maturation and subsequent embryonic development. Second, AR was added to the IVM medium to culture immature oocytes and investigate whether AR could improve the effects of IVM. Finally, we pioneered the use of a fertilization medium supplemented with AR for the pre-insemination culture of COCs to explore whether the involvement of AR can promote the maturation and fertilization of IVF oocytes, as well as subsequent embryonic development. Results: A total of 609 FF samples were examined, and a positive correlation between AR levels and blastocyst formation was observed. In our IVM study, the development potential and IVM rate of immature oocytes, as well as the fertilization rate of IVM oocytes in the AR-added groups, were ameliorated significantly compared to the control group (All P < 0.05). Only the IVM-50 group had a significantly higher blastocyst formation rate than the control group (P < 0.05). In the final IVF study, the maturation, fertilization, high-quality embryo, blastocyst formation, and high-quality blastocyst rates of the AR-added group were significantly higher than those of the control group (All P < 0.05). Conclusion: AR levels in the FF positively correlated with blastocyst formation, and AR involvement in pre-insemination cultures of COCs can effectively improve laboratory outcomes in IVF. Furthermore, AR can directly promote the in vitro maturation and developmental potential of human immature oocytes at an optimal concentration of 50 ng/ml.

Endophytic Aspergillus fumigatiaffinis: Novel paclitaxel production and optimization insights.

This study investigated the potential of endophytic fungi to produce paclitaxel (Taxol®), a potent anticancer compound widely employed in chemotherapy. This research aimed to identify, confirm, and characterize endophytic fungi capable of paclitaxel (PTX) production and assess their paclitaxel yield. Additionally, it aimed to investigate factors influencing paclitaxel production. A total of 100 endophytic fungal isolates were collected and identified from the roots of Artemisia judaica. Aspergillus fumigatiaffinis exhibited the highest PTX production (26.373 µg L-1) among the isolated endophytic fungi. The strain was identified as A. fumigatiaffinis (Accession No. PP235788.1). Molecular identification confirmed its novelty, representing the first report of PTX production by A. fumigatiaffinis, an endophyte of Artemisia judaica. Optimization through full factorial design of experiments (DOE) and response surface methodology (RSM) significantly enhanced PTX production to 110.23 µg L-1 from 1 g of dry weight of the fungal culture under optimal conditions of pH 8.0, 150 µg L-1 becozyme supplementation, and 18 days of fermentation in potato dextrose broth. The presence of paclitaxel was confirmed using thin layer chromatography, high performance liquid chromatography, and gas chromatography-mass spectrometry. These findings maximize the role of endophytic fungus to produce a secondary metabolite that might be able to replace the chemically produced PTX and gives an opportunity to provide a sustainable source of PTX eco-friendly at high concentrations. KEY POINTS: • Endophytic fungi, like A. fumigatiaffinis, show promise for eco-friendly paclitaxel production • Optimization strategies boost paclitaxel yield significantly, reaching 110.23 µg L -1 • Molecular identification confirms novelty, offering a sustainable PTX source.

Enhancing Cordycepin in Functional Porridge through Rice Varietal Fermentation with Cordyceps militaris (Ascomycetes) and Utilizing Non-Targeted Metabolomics for Process Enhancement.

Cordyceps militaris, a medicinal fungus rich in cordycepin, shows promise in treating diseases such as cancer, respiratory issues, and COVID-19. This study examines the impact of different Taiwanese rice varieties on its solid-state fermentation, focusing on optimizing cordycepin production. The results indicated that the cordycepin yield was indeed affected by the type of rice used. In terms of the fruiting bodies, germ rice resulted in the highest yield (13.1 ± 0.36 mg/g), followed by brown rice (11.9 ± 0.26 mg/g). In the rice culture medium (RCM), brown rice led to the highest yield (4.77 ± 0.06 mg/g). Using gas chromatography-mass spectrometry and untargeted metabolomics, the study identifies four key volatile components linked to cordycepin, providing insights into developing functional rice porridge products. These findings are significant for advancing cordycepin mass production and offering dietary options for older individuals.

Dynamic Energy Budget model for E. coli growth in carbon and nitrogen limitation conditions.

The simulations and predictions obtained from mathematical models of bioprocesses conducted by microorganisms are not overvalued. Mechanistic models are bringing a better process understanding and the possibility of simulating unmeasurable variables. The Dynamic Energy Budget (DEB) model is an energy balance that can be formulated for any living organism and can be classified as a structured model. In this study, the DEB model was used to describe E. coli growth in a batch reactor in carbon and nitrogen substrate limitation conditions. The DEB model provides a possibility to follow the changes in the microbes' cells including their elemental composition and content of some important cell ingredients in different growth phases in substrate limitation conditions which makes it more informative compared to Monod's model. The model can be used as an optimal choice between Monod-like models and flux-based approaches. KEY POINTS: • The DEB model can be used to catch changes in elemental composition of E. coli • Bacteria batch culture growth phases can be explained by the DEB model • The DEB model is more informative compared to Monod's based models.

Production and stability of cultured red blood cells depends on the concentration of cholesterol in culture medium.

The production of cultured red blood cells (cRBC) for transfusion purposes requires large scale cultures and downstream processes to purify enucleated cRBC. The membrane composition, and cholesterol content in particular, are important during proliferation of (pro)erythroblasts and for cRBC quality. Therefore, we tested the requirement for cholesterol in the culture medium during expansion and differentiation of erythroid cultures with respect to proliferation, enucleation and purification by filtration. The low cholesterol level (22 µg/dl) in serum free medium was sufficient to expand (pro)erythroblast cultures. Addition of 2.0 or 5.0 mg/dL of free cholesterol at the start of differentiation induction inhibited enucleation compared to the default condition containing 3.3 mg/dl total cholesterol derived from the addition of Omniplasma to serum free medium. Addition of 5.0 mg/dl cholesterol at day 5 of differentiation did not affect the enucleation process but significantly increased recovery of enucleated cRBC following filtration over leukodepletion filters. The addition of cholesterol at day 5 increased the osmotic resistance of cRBC. In conclusion, cholesterol supplementation after the onset of enucleation improved the robustness of cRBC and increased the yield of enucleated cRBC in the purification process.

Polyphosphate Plays a Significant Role in the Maturation of Spores in Myxococcus xanthus.

Myxococcus xanthus synthesizes polyphosphates (polyPs) with polyphosphate kinase 1 (Ppk1) and degrades short- and long-chain polyPs with the exopolyphosphatases, Ppx1 and Ppx2, respectively. M. xanthus polyP:AMP phosphotransferase (Pap) generates ADP from AMP and polyPs. Pap expression is induced by an elevation in intracellular polyP concentration. M. xanthus synthesized polyPs during the stationary phase; the ppk1 mutant died earlier than the wild-type strain after the stationary phase. In addition, M. xanthus cells cultured in phosphate-starved medium, H2O2-supplemented medium, or amino acid-deficient medium increased the intracellular polyP levels by six- to ninefold after 6 h of incubation. However, the growth of ppk1 and ppx2 mutants in phosphate-starved medium and H2O2-supplemented medium was not significantly different from that of wild-type strain, nor was there a significant difference in fruiting body formation and sporulation in starvation condition. During development, no difference was observed in the adenylate energy charge (AEC) values in the wild-type, ppk1 mutant, and pap mutant strains until the second day of development. However, after day 3, the ppk1 and pap mutants had a lower ADP ratio and a higher AMP ratio compared to wild-type strain, and as a result, the AEC values of these mutants were lower than those of the wild-type strain. Spores of ppk1 and pap mutants in the nutrient medium germinated later than those of the wild-type strain. These results suggested that polyPs produced during development may play an important role in cellular energy homeostasis of the spores by being used to convert AMP to ADP via Pap.

Optimized Workflow from Gene to Product.

This chapter outlines the workflow using the ExpiSf™ Expression System designed for high-density infection of suspension ExpiSf9™ cells. The system utilizes a chemically defined, serum-free, protein-free, and animal origin free medium, making it suitable for recombinant protein expression experiments. The ExpiSf™ chemically defined medium allows efficient transfection and baculovirus production directly within the same culture medium. The ExpiSf™ Expression System Starter Kit provides all necessary components, including cells, culture medium, and reagents needed to infect one (1) liter of cell culture. The system's versatility and animal origin free nature make it a valuable tool for various protein expression studies and biotechnological applications.

Short-term adaptation as a tool to improve bioethanol production using grass press-juice as fermentation medium.

Grass raw materials collected from grasslands cover more than 30% of Europe's agricultural area. They are considered very attractive for the production of different biochemicals and biofuels due to their high availability and renewability. In this study, a perennial ryegrass (Lolium perenne) was exploited for second-generation bioethanol production. Grass press-cake and grass press-juice were separated using mechanical pretreatment, and the obtained juice was used as a fermentation medium. In this work, Saccharomyces cerevisiae was utilized for bioethanol production using the grass press-juice as the sole fermentation medium. The yeast was able to release about 11 g/L of ethanol in 72 h, with a total production yield of 0.38 ± 0.2 gEthanol/gsugars. It was assessed to improve the fermentation ability of Saccharomyces cerevisiae by using the short-term adaptation. For this purpose, the yeast was initially propagated in increasing the concentration of press-juice. Then, the yeast cells were re-cultivated in 100%(v/v) fresh juice to verify if it had improved the fermentation efficiency. The fructose conversion increased from 79 to 90%, and the ethanol titers reached 18 g/L resulting in a final yield of 0.50 ± 0.06 gEthanol/gsugars with a volumetric productivity of 0.44 ± 0.00 g/Lh. The overall results proved that short-term adaptation was successfully used to improve bioethanol production with S. cerevisiae using grass press-juice as fermentation medium. KEY POINTS: • Mechanical pretreatment of grass raw materials • Production of bioethanol using grass press-juice as fermentation medium • Short-term adaptation as a tool to improve the bioethanol production.

Preovulatory follicular fluid secretome added to in vitro maturation medium influences the metabolism of equine cumulus-oocyte complexes.

BACKGROUND: In vitro embryo production is a highly demanded reproductive technology in horses, which requires the recovery (in vivo or post-mortem) and in vitro maturation (IVM) of oocytes. Oocytes subjected to IVM exhibit poor developmental competence compared to their in vivo counterparts, being this related to a suboptimal composition of commercial maturation media. The objective of this work was to study the effect of different concentrations of secretome obtained from equine preovulatory follicular fluid (FF) on cumulus-oocyte complexes (COCs) during IVM. COCs retrieved in vivo by ovum pick up (OPU) or post-mortem from a slaughterhouse (SLA) were subjected to IVM in the presence or absence of secretome (Control: 0 µg/ml, S20: 20 µg/ml or S40: 40 µg/ml). After IVM, the metabolome of the medium used for oocyte maturation prior (Pre-IVM) and after IVM (Post-IVM), COCs mRNA expression, and oocyte meiotic competence were analysed. RESULTS: IVM leads to lactic acid production and an acetic acid consumption in COCs obtained from OPU and SLA. However, glucose consumption after IVM was higher in COCs from OPU when S40 was added (Control Pre-IVM vs. S40 Post-IVM: 117.24 ± 7.72 vs. 82.69 ± 4.24; Mean µM ± SEM; p < 0.05), while this was not observed in COCs from SLA. Likewise, secretome enhanced uptake of threonine (Control Pre-IVM vs. S20 Post-IVM vs. S40 Post-IVM: 4.93 ± 0.33 vs. 3.04 ± 0.25 vs. 2.84 ± 0.27; Mean µM ± SEM; p < 0.05) in COCs recovered by OPU. Regarding the relative mRNA expression of candidate genes related to metabolism, Lactate dehydrogenase A (LDHA) expression was significantly downregulated when secretome was added during IVM at 20-40 µg/ml in OPU-derived COCs (Control vs. S20 vs. S40: 1.77 ± 0.14 vs. 1 ± 0.25 vs. 1.23 ± 0.14; fold change ± SEM; p < 0.05), but not in SLA COCs. CONCLUSIONS: The addition of secretome during in vitro maturation (IVM) affects the gene expression of LDHA, glucose metabolism, and amino acid turnover in equine cumulus-oocyte complexes (COCs), with diverging outcomes observed between COCs retrieved using ovum pick up (OPU) and slaughterhouse-derived COCs (SLA).

Process optimized for production of iturin A in biofilm reactor by Bacillus velezensis ND.

In this research, to provide an optimal growth medium for the production of iturin A, the concentrations of key amino acid precursors were optimized in shake flask cultures using the response surface method. The optimized medium were applied in a biofilm reactor for batch fermentation, resulting in enhanced production of iturin A. On this basis, a step-wise pH control strategy and a combined step-wise pH and temperature control strategy were introduced to further improve the production of iturin A. Finally, the fed-batch fermentation was performed based on combined step-wise pH and temperature control. The titer and productivity of iturin A reached 7.86 ± 0.23 g/L and 65.50 ± 1.92 mg/L/h, respectively, which were 37.65 and 65.20% higher than that before process optimization.

Evaluation of Colorimetric Nitrate Reductase Assay in Liquid Medium for Detection of Resistance to First-line Antitubercular Drugs.

BACKGROUND: On a global scale, India holds the distinction of having the greatest number of tuberculosis (TB) cases caused by Mycobacterium tuberculosis (MTB) complex. The study aimed at evaluating the sensitivity, specificity, accuracy, cost, rapidity, and feasibility of the performance of the colorimetric nitrate reductase-based antibiotic susceptibility (CONRAS) test against the indirect proportion method (IPM) on Lowenstein-Jensen media as the gold standard. METHODS: A comparative cross-sectional study was performed on 51 MTB isolates. Fresh subcultures were used for drug susceptibility testing by IPM on the Lowenstein-Jensen medium and the CONRAS method in liquid medium. Quality control for drug susceptibility testing was done using a known sensitive strain of MTB (H37Rv) and strains resistant to both isoniazid (INH) and rifampicin (RIF) - multidrug-resistant (MDR), mono-resistant to RIF, streptomycin (STM), and ethambutol (EMB). Statistical analysis was performed using MedCalc software (Version 20.027). RESULTS: CONRAS, carried out in microfuge tubes, was cost-efficient and easy to perform/interpret with most results being available in 10 days compared to 42 days in the case of IPM. The sensitivity, specificity, and accuracy of RIF and INH were 100%, 97.37%, and 98.04 and 93.33%, 97.59%, and 96.08%, respectively, which translates into an almost perfect agreement between the two methods as indicated by κ value of 0.905 and 0.949, respectively, for the two drugs. The performance of CONRAS was less satisfactory for STM and EMB when compared to IPM. CONCLUSIONS: CONRAS may serve as a useful test for the detection of MDR-TB because of its accuracy, low cost, ease of performance/interpretation, and rapidity when compared to IPM on LJ medium. It does not involve the use of expensive reagents and equipment, as is the case with molecular methods like GeneXpert and line probe assay, making it a suitable option for the detection of MDR-TB in resource-poor settings.

Induction into viable but non culturable state and outgrowth heterogeneity of Listeria monocytogenes is affected by stress history and type of growth.

Exposure to sublethal stresses related to food-processing may induce a heterogenous mixture of cells that co-exist, comprising healthy, sublethally injured, dormant and dead cells. Heterogeneity in survival capacity and dormancy of single cells may impede the detection of foodborne pathogens. In this study, we exposed Listeria monocytogenes Scott A strain, to peracetic acid (PAA; 20-40 ppm) and to acidic conditions (hydrochloric (HCl) and acetic (AA) acid, adjusted to pH 2.7-3.0, to evaluate the resuscitation capacity and outgrowth kinetics of metabolically active cells in two different media. Injury and the viable-but-non-culturable (VBNC) status of cells were assessed by flow cytometry using CFDA (metabolically active) and PI (dead) staining. Stressed CFDA+PI- cells were sorted on Tryptic Soy (TS) Agar or in TS broth, both supplemented with 0.6 % Yeast Extract (TSAYE or TSBYE), to evaluate culturability. Resuscitation capacity of CFDA+PI-sorted cells (10 events/well) was monitored by visual inspection on TSAYE and by optical density measurement in TSBYE for 5 days. Sorting of L. monocytogenes viable cells (CFDA+PI-) in Ringer's solution on TSAYE and TSBYE showed 100 % recovery in both media (control condition), while the mean lag time in TSBYE was 9.6 h. Treatment with 20 ppm PAA for 90 and 180 min resulted in 74.79 % and 85.82 % of non-culturable cells in TSBYE and increased the average lag time to 41.7 h and 43.8 h, respectively, compared to the control (9.6 h). The longest average lag time (79.5 h) was detected after treatment with 30 ppm PAA for 90 min, while at the same condition sorting of CFDA+PI- cells resulted in 95.05 % and 93.94 % non-culturable cells on TSAYE and TSBYE, respectively. The highest percentage of wells with non-culturable cells (96.17 %) was detected on TSAYE after treatment with 40 ppm PAA for 30 min. Fractions of VBNC cells were detected in TSBYE after treatment with HCl pH 3.0 for 60 and 240 min, and in TSAYE and TSBYE after exposure to AA pH 2.7. Treatment with AA pH 2.7 for 150-300 min increased the range of recorded lag time values compared to 60 min, from 8.6 h up to 13.3 h, as well as the mean lag times in TSBYE. Modelling of the outgrowth kinetics comparing the two types of stress (oxidative vs acid) and the two systems of growth (colonial vs planktonic) revealed that low starting concentrations hindered the detection of viable L. monocytogenes cells, either due to VBNC induction or cell heterogeneity.

Determining the accuracy and suitability of common analytical techniques for sophorolipid biosurfactants.

To determine the performance of a sophorolipid biosurfactant production process, it is important to have accurate and specific analytical techniques in place. Among the most popular are the anthrone assay, gravimetric quantification (hexane:ethyl acetate extraction), and high-performance liquid chromatography (HPLC). The choice of analytical tool varies depending on cost, availability, and ease of use; however, these techniques have never been compared directly against one another. In this work, 75 fermentation broths with varying product/substrate concentrations were comprehensively tested with the 3 techniques and compared. HPLC-ultraviolet detection (198 nm) was capable of quantifying C18:1 subterminal hydroxyl diacetylated lactonic sophorolipid down to a lower limit of 0.3 g/L with low variability (<3.21%). Gravimetric quantification of the broths following liquid:liquid extraction with hexane and ethyl acetate showed some linearity (R2 = .658) when compared to HPLC but could not quantify lower than 11.06 g/L, even when no sophorolipids were detected in the sample, highlighting the non-specificity of the method to co-extract non-sophorolipid components in the final gravimetric measure. The anthrone assay showed no linearity (R2 = .129) and was found to cross-react with media components (rapeseed oil, corn steep liquor, glucose), leading to consistent overestimation of sophorolipid concentration. The appearance of poor biomass separation during sample preparation with centrifugation was noted and resolved with a novel sample preparation method with pure ethanol. Extensive analysis and comparisons of the most common sophorolipid quantification techniques are explored and the limitations/advantages are highlighted. The findings provide a guide for scientists to make an informed decision on the suitable quantification tool that meets their needs, exploring all aspects of the analysis process from harvest, sample preparation, and analysis.

Physiological response of Metarhizium rileyi with linoleic acid supplementation.

Metarhizium rileyi has a broad biocontrol spectrum but is highly sensitive to abiotic factors. A Colombian isolate M. rileyi Nm017 has shown notorious potential against Helicoverpa zea. However, it has a loss of up to 22 % of its conidial germination after drying, which limits its potential as a biocontrol agent and further commercialization. Conidial desiccation resistance can be enhanced by nutritional supplements, which promotes field adaptability and facilitates technological development as a biopesticide. In this study, the effect of culture medium supplemented with linoleic acid on desiccation tolerance in Nm017 conidia was evaluated. Results showed that using a 2 % linoleic acid-supplemented medium increased the relative germination after drying by 41 % compared to the control treatment, without affecting insecticidal activity on H. zea. Also, the fungus increased the synthesis of trehalose, glucose, and erythritol during drying, independently of linoleic acid use. Ultrastructural analyses of the cell wall-membrane showed a loss of thickness by 22 % and 25 %, in samples obtained from 2 % linoleic acid supplementation and the control, respectively. Regarding its morphological characteristics, conidia inner area from both treatments did not change after drying. However, conidia from the control had a 24 % decrease in length/width ratio, whereas there was no alteration in conidia from acid linoleic. The average value of dry conidia elasticity coefficient from linoleic acid treatment was 200 % above the control. Medium supplementation with linoleic acid is a promising fermentation strategy for obtaining more tolerant conidia without affecting production and biocontrol parameters, compatible solutes synthesis, or modifying its cell configuration.

The chemotrophic behaviour of Aspergillus niger: Mapping hyphal filaments during chemo-sensing; the first step towards directed materials formation.

In the development of fungal based materials for applications in construction through to biomedical materials and fashion, understanding how to regulate and direct growth is key for gaining control over the form of material generated. Here, we show how simple 'chemical food' cues can be used to manipulate the growth of fungal networks by taking Aspergillus niger as an exemplar species. Chemotrophic responses towards a range of nitrogen and carbon containing biomolecules including amino acids, sugars and sugar alcohols were quantified in terms of chemotrophic index (CI) under a range of basal media compositions (low and high concentrations of N and C sources). Growth of filamentous networks was followed using fluorescence microscopy at single time points and during growth by an AI analytical approach to explore chemo sensing behaviour of the fungus when exposed to pairs (C-C, C-N, N-N) of biomolecules simultaneously. Data suggests that the directive growth of A. niger can be controlled towards simple biomolecules with CI values giving a good approximation for expected growth under a range of growth conditions. This is a first step towards identifying conditions for researcher-led directed growth of hyphae to make mycelial mats with tuneable morphological, physicochemical, and mechanical characteristics.

Effects of temperature, pH, and relative humidity on the growth of Penicillium paneum OM1 isolated from pears and its patulin production.

Patulin is a mycotoxin produced by several species of Penicillium sp., Aspergillus sp., and Byssochlamys sp. on apples and pears. Most studies have been focused on Penicillium expansum, a common postharvest pathogen, but little is known about the characteristics of Penicillium paneum. In the present study, we evaluated the effects of temperature, pH, and relative humidity (RH) on the growth of P. paneum OM1, which was isolated from pears, and its patulin production. The fungal strain showed the highest growth rate at 25 °C and pH 4.5 on pear puree agar medium (PPAM) under 97 % RH, while it produced the highest amount of patulin at 20 °C and pH 4.5 on PPAM under 97 % RH. Moreover, RT-qPCR analysis of relative expression levels of 5 patulin biosynthetic genes (patA, patE, patK, patL, and patN) in P. paneum OM1 exhibited that the expression of the 4 patulin biosynthetic genes except patL was up-regulated in YES medium (patulin conducive), while it was not in PDB medium (patulin non-conducive). Our data demonstrated that the 3 major environmental parameters had significant impact on the growth of P. paneum OM1 and its patulin production. These results could be exploited to prevent patulin contamination by P. paneum OM1 during pear storage.

Mechanical resistance of the environment affects root hair growth and nucleus dynamics.

Root hair (RH) cells are important for the growth and survival of seedlings. They favor plant-microbe interactions and nutrients uptake. When invading the soil, RH cells have to penetrate a dense medium exhibiting a variety of physical properties, such as mechanical resistance, that impact the growth and survival of plants. Here we investigate the effect of the mechanical resistance of the culture medium on RH-physical and phenotypical parameters such as length, time, and speed of growth. We also analyze the impact of the environment on nuclear dynamics. We show that the RH growth rate and the nucleus speed decrease similarly as mechanical resistance increases while the time of growth of RH cells is invariable. Moreover, during RH growth, the nucleus-to-tip distance was found to decrease when the stiffness of the environment was increased. Along this line, using Latrunculin B treatment in liquid growth media, we could internally slow down RH growth to reach speeds similar to those observed in stiff solid media while the nucleus-to-tip distance was only slightly affected, supporting thus the idea of a specific effect of mechanical resistance of the environment on nucleus dynamics.

Comprehensive investigations of 2-phenylethanol production by the filamentous fungus Annulohypoxylon stygium.

2-Phenylethanol (2-PE) is an aromatic compound with a rose-like fragrance that is widely used in food and other industries. Yeasts have been implicated in the biosynthesis of 2-PE; however, few studies have reported the involvement of filamentous fungi. In this study, 2-PE was detected in Annulohypoxylon stygium mycelia grown in both potato dextrose broth (PDB) and sawdust medium. Among the 27 A. stygium strains investigated in this study, the strain "Jinjiling" (strain S20) showed the highest production of 2-PE. Under optimal culture conditions, the concentration of 2-PE was 2.33 g/L. Each of the key genes in Saccharomyces cerevisiae shikimate and Ehrlich pathways was found to have homologous genes in A. stygium. Upon the addition of L-phenylalanine to the medium, there was an upregulation of all key genes in the Ehrlich pathway of A. stygium, which was consistent with that of S. cerevisiae. A. stygium as an associated fungus provides nutrition for the growth of Tremella fuciformis and most spent composts of T. fuciformis contain pure A. stygium mycelium. Our study on the high-efficiency biosynthesis of 2-PE in A. stygium offers a sustainable solution by utilizing the spent compost of T. fuciformis and provides an alternative option for the production of natural 2-PE. KEY POINTS: • Annulohypoxylon stygium can produce high concentration of 2-phenylethanol. • The pathways of 2-PE biosynthesis in Annulohypoxylon stygium were analyzed. • Spent compost of Tremella fuciformis is a potential source for 2-phenylethanol.

Evaluation of hydrolyzed cheese whey medium for enhanced bacterial cellulose production by Komagataeibacter rhaeticus MSCL 1463.

Industrial production of bacterial cellulose (BC) remains challenging due to significant production costs, including the choice of appropriate growth media. This research focuses on optimization of cheese whey (CW) based media for enhanced production of BC. Two modifications were made for CW medium for BC production with Komagataeibacter rhaeticus MSCL 1463. BC production in a medium of enzymatically hydrolyzed CW (final concentration of monosaccharides: glucose 0.13 g L-1, galactose 1.24 g L-1) was significantly enhanced, achieving a yield of 4.95 ± 0.25 g L-1, which markedly surpasses the yields obtained with the standard Hestrin-Schramm (HS) medium containing 20 g L-1 glucose and acid-hydrolyzed CW (final concentration of monosaccharides: glucose 1.15 g L-1, galactose 2.01 g L-1), which yielded 3.29 ± 0.12 g L-1 and 1.01 ± 0.14 g L-1, respectively. We explored the synergistic effects of combining CW with various agricultural by-products (corn steep liquor (CSL), apple juice, and sugar beet molasses). Notably, the supplementation with 15% corn steep liquor significantly enhanced BC productivity, achieving 6.97 ± 0.17 g L-1. A comprehensive analysis of the BC's physical and mechanical properties indicated significant alterations in fiber diameter (62-167 nm), crystallinity index (71.1-85.9%), and specific strength (35-82 MPa × cm3 g-1), as well as changes in the density (1.1-1.4 g cm-3). Hydrolyzed CW medium supplemented by CSL could be used for effective production of BC.

Heat resistance of five spoilage microorganisms in a carbonated broth.

Despite their acidic pH, carbonated beverages can be contaminated by spoilage microorganisms. Thermal treatments, before and/or after carbonation, are usually applied to prevent the growth of these microorganisms. However, the impact of CO2 on the heat resistance of spoilage microorganisms has never been studied. A better understanding of the combined impact of CO2 and pH on the heat resistance of spoilage microorganisms commonly found in carbonated beverages might allow to optimize thermal treatment. Five microorganisms were selected for this study: Alicyclobacillus acidoterrestris (spores), Aspergillus niger (spores), Byssochlamys fulva (spores), Saccharomyces cerevisiae (vegetative cells), and Zygosaccharomyces parabailii (vegetative cells). A method was developed to assess the impact of heat treatments in carbonated media on microbial resistance. The heat resistances of the five studied species are coherent with the literature, when data were available. However, neither the dissolved CO2 concentration (from 0 to 7 g/L), nor the pH (from 2.8 to 4.1) have an impact on the heat resistance of the selected microorganisms, except for As. niger, for which the presence of dissolved CO2 reduced the heat resistance. This study improved our knowledge about the heat resistance of some spoilage microorganisms in presence of CO2.