ABSTRACT
Artificial intelligence (AI) is making waves in dentistry, with applications in predicting dental implant success. AI models analyze patient data (X-rays, medical history) to identify factors influencing implant viability. The aim is to identify existing research on the use of AI-based predictive models in dental implants. The following databases were searched: Web of Science, Scopus, Google Scholar, PubMed, and Cochrane Library, using the keywords "Artificial Intelligence," "Dentistry," "Implant," and "Success." The studies were reviewed qualitatively, as quantitative analysis was not feasible due to the lack of specific outcomes and the insufficient number of studies for comparison. Technology has presented dental implantology with many opportunities, and it is through artificial intelligence that it is advancing. AI is being applied to detect potential implant failure patients, prognosis osseointegration, improve implant design, and master planning and also for data analysis to predict early complications. Decision trees, random forests, Artificial Neural Networks (ANN), and Deep Learning (DL) improve diagnostics and treatment planning and introduce a powerful predictive model for a successful implant.
Subject(s)
Artificial Intelligence , Dental Implants , Neural Networks, Computer , Humans , Deep Learning , Dental Implantation/methods , Decision TreesABSTRACT
BACKGROUND: The aim of this research was to analyse the current literature on displaced dental implants in the mandibular body, including local and systemic variables related to their cause, and to identify the most frequent location. METHODS: The study conducted a search of three databases (Pubmed, Scopus, and Web of Science) using specific index terms such as 'dental implant', 'displacement', 'dislocation', 'displaced', and 'mandible'. The analysis focused on the direction of displacement and the characteristics of the bone tissue (bone quality, density, and quantity) in cases where dental implants were displaced. RESULTS: A total of 371 articles were obtained. Thirteen of these articles were selected and read in full. To define bone quality, the Lekholm and Zarb classification, modified by Rosas et al., was used. The type II-B bone, which is characterized by thick cortical bone surrounding cancellous bone with extremely wide medullary spaces, presented the largest number of complications. Twenty-two cases were found in which the displacement direction was horizontal. Of these, four were displaced vestibularly, fourteen lingually, and four remained in the center. Additionally, 24 cases presented vertical displacement, with 12 displaced towards the inferior border of the mandible, 9 towards the middle or adjacent to the inferior dental nerve canal, and 3 above the inferior dental nerve canal. CONCLUSION: The accidental displacement of implants within the mandibular body is associated with various risk factors, including the characteristics of the bony trabeculum and the size of the medullary spaces. It is reasonable to suggest that only an adequate pre-surgical diagnostic evaluation, with the help of high-resolution tomographic images that allow a previous evaluation of these structures, will help to have better control over the other factors, thus minimizing the risk of displacement.
Subject(s)
Dental Implants , Mandible , Humans , Dental Implants/adverse effects , Mandible/diagnostic imaging , Risk Factors , Foreign-Body Migration/prevention & control , Foreign-Body Migration/etiology , Bone Density , Dental Restoration FailureABSTRACT
BACKGROUND: The purpose of this pilot in-vitro study was to assess the effect of sterilization on the intra-implant axis, inter-implant axis, intra-implant distance and inter-implant distance of three implants in a straight line by using laboratory scanner (LBS) versus intra-oral scanner (IOS) with intra-oral scan bodies (ISB). METHODS: A printed 3D model with three internal hex analogs in the positions 15#,16#,17# was used. Zirkonzhan (ZZ) intra-oral scan body (ISB), two-piece titanium was used. The ZZ ISBs were scanned by 7 Series dental wings (LBS) and 30 times by Primescan (IOS) pre sterilization and 30 times post sterilization. For each scan (pre and post) stereolithography (STL) file was created and a comparison between all the scans pre sterilization and post sterilization were superimposed on the laboratory scan by using a 3D analyzing software. A Kolmogorov-Smirnov test performed followed by Wilcoxon Signed Ranks tests. (p < 0.05) Results: Post sterilization of the ZZ ISB, the mean errors were significantly increased for the inter-implant distances (p < 0.0005), intra-implant distances 1,2,3 (p < 0.0005), intra-implant axis 1,3 (p < 0.0005) and inter-implant axes 13,23 (p < 0.05). In contrast, the mean errors for intra-implant axis 2 (p < 0.0005) and inter-implant axis 12 (p < 0.0005) were significantly reduced. CONCLUSIONS: ZZ ISB showed changes in all four parameters after sterilization. The middle ISB had the largest changes in mean error regarding all four parameters. Sterilization process may affect the three-dimensional (3D) structure of the ZZ ISB after three cycles. There is a lack in the literature in this field and there is a need for further studies to explore the effect of sterilization (multiple cycles) on different ISBs and for creating an approved guidelines regarding the amount of sterilization for each ISB in the industry.
Subject(s)
Dental Implants , Sterilization , Sterilization/methods , Humans , In Vitro Techniques , Pilot Projects , Printing, Three-Dimensional , Imaging, Three-Dimensional/methods , Stereolithography , Models, Dental , Dental Prosthesis DesignABSTRACT
BACKGROUND: Hyoid bone is attached to the mandible, tongue, larynx, temporal bone, and cervical spine via different types of muscles or ligaments. The tongue, mandible, and hyoid system play a crucial role in swallowing function. This within subject study aimed to evaluate the impact of mandibular implant overdentures on the displacement of the hyoid bones during the swallowing process. METHODS: Twenty five healthy edentulous subjects were selected for participating in the study. New complete dentures were constructed for all the participants. Subsequently two dental implants were inserted in the canine regions of the participant's mandibular arch. In order to retain the mandibular prosthesis in place, ball attachments were incorporated into the mandibular dentures to convert them into implant overdentures. Using 10 ml of thin liquid bolus, videofluoroscopy swallowing examination was performed in three different oral conditions: without complete dentures (WCD), with complete denture (CDs), and with a mandibular implant overdenture (IODs). ANOVA with Bonferroni test was used to analyze the data in order to determine how the hyoid displacement varied throughout different oral conditions. RESULTS: Compared to complete dentures, mandibular implant overdentures showed a significant decrease (P < 0.05) in both anterior hyoid displacement and duration of hyoid maximum anterior excursion (DOHMAE). However, there was a non-significant difference (P > 0.05) between the two oral circumstances in terms of superior hyoid displacement or duration for hyoid maximum elevation (DOHME). There is no penetration or aspiration for both complete denture and implant overdenture oral conditions. CONCLUSION: Implant retained overdentures have a positive effect on hyoid displacement during swallowing of thin liquid bolus consistency relative to conventional complete dentures. TRIAL REGISTRATION: Retrospectively registered (NCT06187181) 02/1/2024.
Subject(s)
Deglutition , Denture, Overlay , Hyoid Bone , Mouth, Edentulous , Humans , Deglutition/physiology , Male , Female , Mouth, Edentulous/physiopathology , Mouth, Edentulous/rehabilitation , Middle Aged , Aged , Mandible , Fluoroscopy , Dental Prosthesis, Implant-Supported , Dental Implants , Jaw, Edentulous/rehabilitation , Jaw, Edentulous/physiopathologyABSTRACT
In recent years, dental implants have become a trend in the treatment of human patients with missing teeth, which may also be an acceptable method for companion animal dentistry. However, there is a gap challenge in determining appropriate implant sizes for different dog breeds and human. In this study, we utilized skull computed tomography data to create three-dimensional models of the mandibles of dogs in different sizes. Subsequently, implants of various sizes were designed and subjected to biomechanical finite element analysis to determine the optimal implant size. Regression models were developed, exploring the relationship between the average weight of dogs and the size of premolar implants. Our results illustrated that the regression equations for mean body weight (x, kg) and second premolar (PM2), third premolar (PM3), and fourth premolar (PM4) implant length (y, mm) in dogs were: y = 0.2785x + 7.8209, y = 0.2544x + 8.9285, and y = 0.2668x + 10.652, respectively; the premolar implant diameter (mm) y = 0.0454x + 3.3506, which may provide a reference for determine suitable clinical implant sizes for dogs.
Subject(s)
Bicuspid , Dental Implants , Finite Element Analysis , Mandible , Animals , Dogs , Tomography, X-Ray Computed/veterinary , Dental Implantation/methods , Dental Implantation/veterinary , Male , Female , ForecastingABSTRACT
BACKGROUND: The posterior maxilla presents challenges for implant insertion because of the poor bone quality as well as the loss of vertical bone height. Indirect transcrestal sinus lift techniques are advised when a few millimeters of additional height are needed. This study aimed to evaluate the clinical and radiographic outcomes of antral membrane balloon technique versus Densah burs for transcrestal maxillary sinus lifting with simultaneous implant placement. MATERIALS AND METHODS: This randomized clinical trial was conducted on 22 patients received 32 dental implants for replacement of missed maxillary posterior teeth after crestal maxillary sinus lifting. The patients were randomly divided into two groups. Group 1, patients underwent crestal sinus floor elevation with simultaneous implant placement using antral membrane balloon technique. Group 2, patients underwent crestal sinus floor elevation with simultaneous implant placement using Densah burs. Patients were evaluated clinically and radiographically using cone beam computed tomography (CBCT) at regular time intervals immediately, 6 months and 12 months after surgery. All clinical and radiographic parameters were statistically analyzed. RESULTS: All dental implants were successful for 12 months of follow up. Regarding implant primary stability, there was a statistical significant difference between the study groups in favor of Densah group (P = 0.004), while there was no significant difference after 6 months (P = 0.07). Radiographically, balloon group showed a statistically significant immediate postoperative vertical bone height (P < 0.0001), and significant reduction in vertical bone height after 6 months (P < 0.0001). Densah group showed significant increase in bone density (P ≤ 0.05). CONCLUSION: Both techniques demonstrated successful clinical and radiographic outcomes for crestal sinus lift. The antral membrane balloon group demonstrated better immediate postoperative vertical bone gain, while Densah burs had higher implant primary stability and bone density. TRIAL REGISTRATION: This study was registered in Clinical-Trials.gov PRS ( https://register. CLINICALTRIALS: gov ) under identification number NCT05922592 on 28/06/2023.
Subject(s)
Cone-Beam Computed Tomography , Sinus Floor Augmentation , Humans , Sinus Floor Augmentation/methods , Male , Female , Middle Aged , Dental Implantation, Endosseous/methods , Adult , Treatment Outcome , Maxillary Sinus/surgery , Maxillary Sinus/diagnostic imaging , Dental Implants , Maxilla/surgery , Maxilla/diagnostic imaging , Follow-Up StudiesSubject(s)
Periodontal Diseases , Humans , Dental Implants , Public Health , Peri-Implantitis/etiology , Mouth Diseases/etiologyABSTRACT
This network meta-analysis aims to compare the clinical efficacy of seven non-surgical therapies for peri-implant disease, including laser treatment, photobiomodulation therapy (PBMT), photodynamic therapy (PDT), systemic antibiotics (SA), probiotics, local antimicrobials (LA), and air-powder polishing (APP) combined with mechanical debridement (MD). We conducted searches in four electronic databases, namely PubMed, Embase, Web of Science, and The Cochrane Library, to identify randomized controlled trials of non-surgical treatments combined with MD for individuals (aged at least 18 years) diagnosed with peri-implantitis or peri-implant mucositis with a minimum of 3 months follow-up. The outcomes of the study were the reduction in pocket probing depth (PPD) and bleeding on probing (BoP), plaque index (PLI), clinical attachment level (CAL), and marginal bone loss (MBL). We employed a frequency random effects network meta-analysis model to combine the effect sizes of the trials using standardized mean difference (SMD) and 95% confidence intervals (CIs). Network meta-analyses include network plots, paired comparison forest plots, league tables, funnel plots, surface under the cumulative ranking area (SUCRA) plots, and sensitivity analysis plots. The results showed that, for peri-implantitis, PBMT +MD demonstrated the highest effect in improving PPD (SUCRA = 75.3%), SA +MD showed the highest effect in improving CAL (SUCRA = 87.4%, SMD = 2.20, and 95% CI: 0.38 to 4.02) and MBL (SUCRA = 99.9%, SMD = 3.92, and 95% CI. 2.90 to 4.93), compared to MD alone. For peri-implant mucositis, probiotics +MD demonstrated the highest effect in improving PPD (SUCRA = 100%) and PLI (SUCRA = 83.2%), SA +MD showed the highest effect in improving BoP (SUCRA = 88.1%, SMD = 0.77, and 95% CI: 0.27 to 1.28), compared to MD alone. Despite the ranking established by our study in the treatment of peri-implant disease, decisions should still be made with reference to the latest treatment guidelines. There is still a need for more high-quality studies to provide conclusive evidence and especially a need for studies regarding direct comparisons between multiple treatment options.
Subject(s)
Debridement , Peri-Implantitis , Humans , Peri-Implantitis/therapy , Debridement/methods , Network Meta-Analysis , Treatment Outcome , Photochemotherapy/methods , Probiotics/therapeutic use , Anti-Bacterial Agents/therapeutic use , Dental Implants/adverse effects , Stomatitis/therapy , Stomatitis/radiotherapy , Stomatitis/etiology , Mucositis/therapy , Laser Therapy/methodsABSTRACT
BACKGROUND: To provide a novel classification for all implants in the maxillary retromolar region to simplify surgical design, reduce surgical risks, and guide clinicians in clinical decision-making. METHODS: A total of 180 patients with bilateral partial or completely edentulous atrophic posterior maxillae who had received or were scheduled to receive pterygomaxillary implants were included in this study. Cone-beam computed tomography was performed, and the sagittal and coronal images were acquired at 110 kV and 10 mA. The exposure volume was 120 mm in diameter and 80 mm in height. The pterygomaxillary implants were divided into three different types based on the anatomical structures the implants passed through. RESULTS: The average age of the 180 patients was 69 (range: 39-89) years; 99 were men and 81 were women. All the patients exhibited 360 pterygomaxillary implant sites. However, during mimic implantation, 14 implant sites were excluded due to severe resorption of the tuberosity, very small pterygoid plates, or variations in the descending palatal artery configuration. Of the 346 pterygomaxillary implant sites, 24.0% (83/346), 40.7% (141/346), 22.0% (76/346), and 13.3% (46/346) were classified as Types I, IIa, IIb, and III, respectively. CONCLUSIONS: Type II pterygomaxillary implants were the most commonly used in the novel classification. Different types of pterygomaxillary implants should follow specific designs and surgical strategies to achieve optimal outcomes.
Subject(s)
Cone-Beam Computed Tomography , Dental Implants , Maxilla , Humans , Female , Male , Aged , Middle Aged , Retrospective Studies , Adult , Aged, 80 and over , Maxilla/surgery , Maxilla/diagnostic imaging , Dental Implantation, Endosseous/methods , Jaw, Edentulous/diagnostic imaging , Jaw, Edentulous/classification , Jaw, Edentulous/surgeryABSTRACT
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Pitman J, Christiaens V, Callens J, Glibert M, Seyssens L, Blanco J, Cosyn J. Immediate implant placement with flap or flapless surgery: A systematic review and meta-analysis. J Clin Periodontol. 2023 Jun;50(6):755-764. doi: 10.1111/jcpe.13795. Epub 2023 Mar 5. PMID: 36843361. SOURCE OF FUNDING: The study was funded by the authors and their affiliated institutions. TYPE OF STUDY/DESIGN: Systematic review with meta-analysis.
Subject(s)
Immediate Dental Implant Loading , Humans , Surgical Flaps , Alveolar Bone Loss , Dental Implantation, Endosseous/methods , Dental ImplantsABSTRACT
OBJECTIVE: To evaluate the dimensional changes in free gingival grafts (FGG) at implant sites in mandibular reconstruction patients. METHODS: Patients who received FGG 4 months after implant placement in the reconstructed mandible with no keratinized mucosa (KM) present were invited for re-examination after 36.7 ± 16.8 months (3.06 ± 1.4 years). Immediately after graft extraction (T0), graft width (GW), graft length (GL), graft thickness (GT), graft dimension (GD), and vertical bone height were documented. Re-examination (T1) included clinical examinations (GW, GL, GD, peri-implant probing depths, and modified Sulcus Bleeding Index), radiographic examination (marginal bone level), and medical chart review. RESULTS: Twenty patients and 62 implants (47 in fibula flaps and 15 in iliac flaps) were included. A significant decrease in GW (51.8%), GL (19.2%), and GD (60.2%), were found between T0 and T1 (p < .001). The univariate analysis showed that GW change was not significantly associated with reconstruction technique, baseline GL, baseline GT, baseline GD, implant location, or type of prosthesis. Implant survival rate of 100% was observed at follow-up. CONCLUSIONS: Within the limitations of the study, free gingival grafts at implant sites in the reconstructed mandible undergo dimensional change that result in a reduction of approximately 60% of the original graft dimension. Graft width decreased over 50%. CLINICAL RELEVANCE: FGG is the standard of care intervention for increasing the amount of KM around implants. This study was the first to evaluate the dimensional change in FGG at implant sites in mandibular reconstruction patients after a medium-term follow-up. CLINICAL TRIAL REGISTRATION: Clinical trial registration is not applicable as this study comprehends a retrospective analysis.
Subject(s)
Gingiva , Mandibular Reconstruction , Humans , Retrospective Studies , Male , Female , Middle Aged , Mandibular Reconstruction/methods , Gingiva/transplantation , Dental Implantation, Endosseous/methods , Treatment Outcome , Adult , Dental Implants , Mandible/surgery , Mandible/diagnostic imaging , Surgical Flaps , Aged , Fibula/transplantationABSTRACT
Die Magnetresonanztomographie hat in den letzten Jahren durch zahlreiche technische Fortschritte vielversprechende Ansätze in der dentomaxillofazialen Radiologie eröffnet. Die MRT hat das Potenzial, zu einer innovativen Methode für die präzise Diagnose und Planung von Zahnimplantaten zu werden, da sie die gleichzeitige Darstellung von Weich- und Hartgewebe ermöglicht und keine Strahlenbelastung für die Patienten mit sich bringt. Die dentale MRT fungiert bereits heute als eine sinnvolle Ergänzung zu konventionellen röntgenbasierten bildgebenden Verfahren und kann dazu beitragen, die mit chirurgischen Eingriffen verbundenen Risiken durch die Optimierung bestehender Therapieprotokolle weiter zu minimieren. Vor dem Hintergrund aktueller Bestrebungen in der Zahnmedizin eine personalisierte orale Diagnostik unter Berücksichtigung patientenspezifischer Faktoren zu ermöglichen, gibt dieser Artikel einen kompakten Überblick über die Möglichkeiten der dentalen MRT in der Implantatchirurgie. Insgesamt verdeutlichen die vorgestellten Anwendungen unter Berücksichtigung der sequenzspezifischen Indikationen und Limitationen das Potenzial der dentalen MRT für die personalisierte implantologische Therapieplanung. Sie ermöglicht die Berücksichtigung von Parametern, die mit konventionellen bildgebenden Verfahren nicht dargestellt werden können, und ist insbesondere nützlich für die Beurteilung chirurgisch relevanter Parameter, die das Weichgewebe betreffen.
Subject(s)
Magnetic Resonance Imaging , Humans , Magnetic Resonance Imaging/methods , Dental Implantation, Endosseous/methods , Dental Implants , Patient Care PlanningSubject(s)
Referral and Consultation , Humans , Dental Implants , United Kingdom , Trust , Dental ImplantationABSTRACT
PURPOSE: To retrospectively evaluate peri-implant bone loss and health status associated with the long-term use of laser surface-treated implants. METHODS: For control study, total of 23 titanium ASTM F136 grade 23 implants were placed in the edentulous molar area of the mandible. When the Implant Stability Quotient (ISQ) ≥ 70 and insertion torque value (ITV) ≥ 35-50 Ncm at the insertion site, an immediate provisional restoration was connected to the implant within a week after surgery. The definitive restorations were placed 2 months after surgery for all implants. 13 implants were immediately loaded, while 10 implants were conventionally loaded. For comparative study, Radiographs were taken from third years for and then annually for the subsequent eight years to monitor marginal bone loss. RESULTS: After eight year of implant installation, the average change in vertical bone loss was 0.009 mm (P < 0.001), while the average change in horizontal bone loss 8 year after implant placement was 0.026 mm (P < 0.001). The mean marginal bone loss was < 0.2 mm on average. CONCLUSIONS: In this retrospective study, laser-treated implants exhibit a low rate of bone absorption around the implants.
Subject(s)
Alveolar Bone Loss , Dental Implants , Retrospective Studies , Humans , Dental Implants/adverse effects , Male , Female , Alveolar Bone Loss/etiology , Alveolar Bone Loss/diagnostic imaging , Middle Aged , Treatment Outcome , Lasers , Aged , Surface Properties , Adult , Mandible/surgery , Dental Prosthesis Design , Immediate Dental Implant Loading/methodsABSTRACT
BACKGROUND: Xenogenic collagen matrices (XCMs) are gaining popularity for soft tissue augmentation in dental implants; yet, gaps exist in our understanding of their comparative effectiveness. OBJECTIVE: This systematic review and meta-analysis focuses on studies that utilize soft tissue augmentation techniques for dental implants to improve keratinized mucosa width (KMW), soft tissue thickness (STT), and soft tissue volume (STV). We compared porcine collagen matrices with autogenous grafts when no bone grafts were utilized. MATERIALS AND METHODS: We searched databases such as PubMed, Scopus, and the Cochrane Central Register of Controlled Trials for randomized controlled trials and controlled clinical trials published between January 2013 and July 2023 that assessed the efficacy of XCM in peri-implant soft tissue augmentation. The primary outcome included KMW changes while the secondary outcome was STT/STV changes. Statistical analyses were conducted using a random- or fixed-effects model, and heterogeneity was assessed using I2 statistics. RESULTS: Nine studies were included in the qualitative analysis, and six were included in the meta-analysis. No significant intergroup differences were observed (p > 0.05), but a significant difference was observed in favor of KMW ≥ 2 mm. Heterogeneity among the studies varied at the 6- and 12-month follow-ups, with I2 values of 78% and 0%, respectively. The pooled mean difference between the XCM and autograft groups was -0.96 (-1.71 to -0.21), which shows that there was a larger increase in KMW in the autograft group compared with the XCM group (p < 0.05). CONCLUSIONS: Collagen matrices are less effective than autogenous grafts at increasing keratinized tissue and STT/STV, but the two techniques yield comparable aesthetic outcomes. Additional studies are necessary to better guide clinical practice and improve patient outcomes.
Subject(s)
Collagen , Dental Implants , Collagen/therapeutic use , Humans , Animals , Swine , Heterografts , Treatment Outcome , Randomized Controlled Trials as TopicABSTRACT
BACKGROUND: Accurate assessment of the bone supporting the implant is crucial. Early detection of bone defects around the implant can prevent the loss of bone support that ultimately leads to the loss of the implant. Therefore, the purpose of this study is to check the accuracy of CBCT in detecting peri-implant fenestrations around the implant. MATERIALS & METHODS: In this laboratory study, healthy beef ribs were used. The ribs were divided into three groups of 12 (control group, 1-2 mm fenestration group, and 2-3 mm fenestration group). The blocks were cut to a length of 20 mm and 36 osteotomies with dimensions of 4 × 12 mm were made by the periodontist in order to place the implant in these bone blocks. Then the titanium implant was placed in the holes and the initial scan was performed with CBCT. In the second group, fenestration-like lesions were created on the same buccal side at a distance of 10 mm from the crest with a diameter of 1-2 mm and in the third group with a diameter of 2-3 mm, and the CBCT scan was performed again with the same parameters. Two radiologists evaluated the images twice for the presence and absence of fenestration. RESULTS: There was no statistically significant difference between direct measurements and CBCT in the fenestration group of 1-2 mm (p < 0.05), but there was a significant difference between direct measurements and CBCT in the fenestration group of 2-3 mm and underestimation was observed in CBCT measurements. CONCLUSION: The findings of this study showed that CBCT radiography has a higher accuracy in measuring the fenestration around the implant with a smaller diameter and has an acceptable diagnostic value in detecting bone loss around the implant.
Subject(s)
Cone-Beam Computed Tomography , Dental Implants , Cone-Beam Computed Tomography/methods , Animals , Cattle , Ribs/diagnostic imagingABSTRACT
BACKGROUND: There is insufficient evidence recommending a framework material and a CAD/CAM manufacturing technique for mandibular implant-supported prostheses. The study objective was to evaluate the clinical application of different materials and construction techniques used for mandibular All-on-4 prosthesis on circumferential peri-implant bony changes after 5 years. METHODS: Thirty-six male patients with all-on-4 mandibular implant-supported prostheses were recalled and divided into three groups. Group PK (patients with frameworks milled from PEEK blocks), Group PSM (patients with frameworks milled from soft metal blocks), and Group SLM (patients with frameworks constructed with additive manufacturing; selective laser melting). The circumferential bone level on all implant faces was assessed with a CBCT. Two-way repeated measures ANOVA was used to compare vertical bone loss (VBL) and horizontal bone loss (HBL) between different groups, implant positions, and observation times followed by Tukey's multiple comparisons. RESULTS: For all observation times, there was a significant difference in VBL between groups for both anterior and posterior implants (P < .001). For anterior implants, group PSM showed the lowest VBL while group PK showed the highest for anterior and posterior implants. For all groups, HBL significantly increased after 5 years for both anterior and posterior implants (P < .001). For anterior implants, group PSM showed the highest HBL. For posterior implants, group PK and SLM showed the highest. CONCLUSION: Within the study's limitations, mandibular implant-supported fixed frameworks fabricated with either milling from PEEK or soft metal blocks, or additive manufacturing (laser melting technology) exhibited significant vertical and horizontal bone height changes after 5 years. CLINICAL TRIAL REGISTRY NUMBER: (NCT06071689) (11/10/2023).
Subject(s)
Alveolar Bone Loss , Computer-Aided Design , Dental Prosthesis, Implant-Supported , Mandible , Humans , Male , Middle Aged , Mandible/diagnostic imaging , Mandible/surgery , Alveolar Bone Loss/diagnostic imaging , Cone-Beam Computed Tomography/methods , Dental Prosthesis Design , Aged , Benzophenones , Adult , Dental Implants , PolymersABSTRACT
In this in vitro study, the use of a 445 nm diode laser was investigated for the decontamination of titanium dental implants. Different irradiation protocols and the effect of repetitive laser irradiation on temperature increase and decontamination efficacy were evaluated on titanium implant models. An automated setup was developed to realize a scanning procedure for a full surface irradiation to recapitulate a clinical treatment. Three irradiation parameter sets A (continuous wave, power 0.8 W, duty cycle (DC) 100%, and 5 s), B (pulsed mode, DC 50%, power 1.0 W, and 10 s), and C (pulsed mode, DC 10%, power 3.0 W, and 20 s) were used to treat the rods for up to ten consecutive scans. The resulting temperature increase was measured by a thermal imaging camera and the decontamination efficacy of the procedures was evaluated against Escherichia coli and Staphylococcus aureus, and correlated with the applied laser fluence. An implant's temperature increase of 10 °C was set as the limit accepted in literature to avoid thermal damage to the surrounding tissue in vivo. Repeated irradiation of the specimens resulted in a steady increase in temperature. Parameter sets A and B caused a temperature increase of 11.27 ± 0.81 °C and 9.90 ± 0.37 °C after five consecutive laser scans, respectively, while parameter set C resulted in a temperature increase of only 8.20 ± 0.53 °C after ten surface scans. The microbiological study showed that all irradiation parameter sets achieved a complete bacterial reduction (99.9999% or 6-log10) after ten consecutive scans, however only parameter set C did not exceed the temperature threshold. A 445 nm diode laser can be used to decontaminate dental titanium rods, and repeated laser irradiation of the contaminated areas increases the antimicrobial effect of the treatment; however, the correct choice of parameters is needed to provide adequate laser fluence while preventing an implant's temperature increase that could cause damage to the surrounding tissue.
Subject(s)
Dental Implants , Escherichia coli , Lasers, Semiconductor , Staphylococcus aureus , Titanium , Titanium/chemistry , Dental Implants/microbiology , Escherichia coli/radiation effects , Staphylococcus aureus/radiation effects , Decontamination/methods , Temperature , Humans , In Vitro TechniquesABSTRACT
BACKGROUND: Long-term success of implant restoration depends on many factors one of them is the sufficient implant stability which is lowered in compromised bone density sites such as the maxilla as it is categorized as type III & IV bone, so searching for a new innovation and updates in implant material and features is very mandatory. So, the aim of this study was to compare between two implant materials (roxolid and traditional titanium) on the primary and secondary stability of implant retained maxillary overdenture. METHODS: Eighteen completely edentulous patients were selected. All patients received maxillary implant-retained overdentures and lower complete dentures; patients were divided equally into two groups according to the type of implant materials. Group A received a total number of 36 implants made of roxolid material and Group B received a total number of 36 implants made of traditional titanium alloys. Implant stability was assessed using ostell device, the primary implant stability was measured at the day of implant installation however, secondary implant stability was measured after six weeks of implant placement. Paired t-test was used to compare between primary and secondary stability in the same group and an independent t-test was used to compare between the two groups with a significant level < 0.05. RESULTS: Independent t-test revealed a significant difference between the two groups with p -value = 0.0141 regarding primary stability and p-value < 0.001 regarding secondary stability, as roxolid implant group was statistically higher stability than titanium group in both. Paired t- test showed a statistically significant difference in roxolid implant group with p-value = 0.0122 however, there was non-statistically significant difference in titanium group with p-value = 0.636. Mann Whitney test showed a significant difference between the two groups regarding amount of change in stability with p value = 0.191. roxolid implant group showed a higher amount of change in stability than the titanium implant group. CONCLUSION: Within the limitation of this study, it could be concluded that: Roxolid implants showed promising results regarding primary and secondary stability compared to conventional Titanium implants and can be a better alternative in implant retained maxillary overdentures. TRIAL REGISTRATION: Retrospectively NCT06334770 at 26-3-2024.