Research and development of microenvironment's influence on stem cells from the apical papilla - construction of novel research microdevices: tooth-on-a-chip.

Stem cells are crucial in tissue engineering, and their microenvironment greatly influences their behavior. Among the various dental stem cell types, stem cells from the apical papilla (SCAPs) have shown great potential for regenerating the pulp-dentin complex. Microenvironmental cues that affect SCAPs include physical and biochemical factors. To research optimal pulp-dentin complex regeneration, researchers have developed several models of controlled biomimetic microenvironments, ranging from in vivo animal models to in vitro models, including two-dimensional cultures and three-dimensional devices. Among these models, the most powerful tool is a microfluidic microdevice, a tooth-on-a-chip with high spatial resolution of microstructures and precise microenvironment control. In this review, we start with the SCAP microenvironment in the regeneration of pulp-dentin complexes and discuss research models and studies related to the biological process.

Bone or Tooth dentin: The TGF-ß signaling is the key.

To investigate the cell linkage between tooth dentin and bones, we studied TGF-ß roles during postnatal dentin development using TGF-ß receptor 2 (Tgfßr2) cKO models and cell lineage tracing approaches. Micro-CT showed that the early Tgfßr2 cKO exhibit short roots and thin root dentin (n = 4; p<0.01), a switch from multilayer pre-odontoblasts/odontoblasts to a single-layer of bone-like cells with a significant loss of ~85% of dentinal tubules (n = 4; p<0.01), and a matrix shift from dentin to bone. Mechanistic studies revealed a statistically significant decrease in odontogenic markers, and a sharp increase in bone markers. The late Tgfßr2 cKO teeth displayed losses of odontoblast polarity, a significant reduction in crown dentin volume, and the onset of massive bone-like structures in the crown pulp with high expression levels of bone markers and low levels of dentin markers. We thus concluded that bones and tooth dentin are in the same evolutionary linkage in which TGF-ß signaling defines the odontogenic fate of dental mesenchymal cells and odontoblasts. This finding also raises the possibility of switching the pulp odontogenic to the osteogenic feature of pulp cells via a local manipulation of gene programs in future treatment of tooth fractures.

Impaired Tertiary Dentin Secretion after Shallow Injury in Tgfbr2-Deficient Dental Pulp Cells Is Rescued by Extended CGRP Signaling.

The transforming growth factor ß (TGFß) superfamily is a master regulator of development, adult homeostasis, and wound repair. Dysregulated TGFß signaling can lead to cancer, fibrosis, and musculoskeletal malformations. We previously demonstrated that TGFß receptor 2 (Tgfbr2) signaling regulates odontoblast differentiation, dentin mineralization, root elongation, and sensory innervation during tooth development. Sensory innervation also modulates the homeostasis and repair response in adult teeth. We hypothesized that Tgfbr2 regulates the neuro-pulpal responses to dentin injury. To test this, we performed a shallow dentin injury with a timed deletion of Tgfbr2 in the dental pulp mesenchyme of mice and analyzed the levels of tertiary dentin and calcitonin gene-related peptide (CGRP) axon sprouting. Microcomputed tomography imaging and histology indicated lower dentin volume in Tgfbr2cko M1s compared to WT M1s 21 days post-injury, but the volume was comparable by day 56. Immunofluorescent imaging of peptidergic afferents demonstrated that the duration of axon sprouting was longer in injured Tgfbr2cko compared to WT M1s. Thus, CGRP+ sensory afferents may provide Tgfbr2-deficient odontoblasts with compensatory signals for healing. Harnessing these neuro-pulpal signals has the potential to guide the development of treatments for enhanced dental healing and to help patients with TGFß-related diseases.

[Transcription factor activator protein 2C contribute to molar development in mice].

Objective: Explore the expression pattern of transcription factor activator protein 2C (TFAP2C) and identify the roles of Tfap2c during tooth development. Methods: Real-time fluorescence quantitative PCR (RT-qPCR) was used to analyze the relative expression level of Tfap2c in various organs of embryonic day(E)14.5 mouse embryos and mouse molar germs at E12.5-E18.5 and postnatal day (P)0-P7. The expression position of Tfap2c in mouse molar germs was demonstrated by frozen section immunofluorescence staining. Cultured mandibular molar germs were transfected with control small interfering RNA (siRNA) or Tfap2c siRNA to evaluate the effect of Tfap2c on tooth molar germs development, and RT-qPCR was used to detect the relative expression level of genes related to odontoblast expression. Dental mesenchymal cells were isolated from E14.5 molar germs and transfected with control siRNA or Tfap2c siRNA, cell counting kit 8 (CCK-8) and scratch healing test were applied to detect dental mesenchymal cell viability and migration. Results: Tfap2c was highly expressed in the early development period of mouse molar germs. Tfap2c was expressed in the epithelial and mesenchymal tissues of E13.5 mouse molar germs and there was no significant difference of relative expression of Tfap2c between them (t=1.06, P=0.472). Tfap2c was expressed in mesenchymal tissues of E14.5 mouse molar germs and the relative expression of Tfap2c in mesenchymal tissues was significantly higher than epithelial tissues (t=37.29, P<0.0001). For molar germs transfected with Tfap2c siRNA, the relative height of cusps (0.708±0.171) and the ratio of cusp height and crown height (0.321±0.068) was significantly lower than control group (1.000±0.287 and 0.483±0.166) (t=2.79, P=0.012; t=2.85, P=0.015). But there was no significant difference in relative height (1.078±0.206, 0.993±0.254, t=0.83, P=0.419)and relative width (1.000±0.116, 0.999±0.122, t=0.01, P=0.992) of crowns between two groups. The relative expression level of genes related to odontoblast expression was decreased (Dspp: t=15.33, P<0.001; Dmp1: t=13.81, P<0.001). Tfap2c siRNA hinders cell migration in dental mesenchymal cells (t=29.86, P=0.001), but there was no significant difference in CCK-8 absorbance value between two groups. The relative expression level of genes related to odontoblast expression was also decreased in dental mesenchymal cells transfected with Tfap2c siRNA (Dspp: t=3.86, P=0.031; Dmp1; t=4.36, P=0.022). Conclusions: Tfap2c highly expressed in the early morphogenesis period of mouse molar germs, mainly in mesenchymal tissues. Tfap2c affected the cusps formation of mouse molar germs and migration of dental mesenchymal cells.

Advances in Regenerative Dentistry: A Systematic Review of Harnessing Wnt/ß-Catenin in Dentin-Pulp Regeneration.

Dentin pulp has a complex function as a major unit in maintaining the vitality of teeth. In this sense, the Wnt/ß-Catenin pathway has a vital part in tooth development, maintenance, repair, and regeneration by controlling physiological activities such as growth, differentiation, and migration. This pathway consists of a network of proteins, such as Wnt signaling molecules, which interact with receptors of targeted cells and play a role in development and adult tissue homeostasis. The Wnt signals are specific spatiotemporally, suggesting its intricate mechanism in development, regulation, repair, and regeneration by the formation of tertiary dentin. This review provides an overview of the recent advances in the Wnt/ß-Catenin signaling pathway in dentin and pulp regeneration, how different proteins, molecules, and ligands influence this pathway, either upregulating or silencing it, and how it may be used in the future for clinical dentistry, in vital pulp therapy as an effective treatment for dental caries, as an alternative approach for root canal therapy, and to provide a path for therapeutic and regenerative dentistry.

Antibacterial Property and Mechanisms of Au@Ag Core-Shell Nanoparticles with Near-Infrared Absorption Against E. faecalis Infection of Dentin.

Background: Enterococcus faecalis (E. faecalis) is one of the main pathogens responsible for refractory root canal infections in the teeth and shows resistance against various antibacterial managements. Effective control of E. faecalis infection is a prerequisite for successful treatment of refractory apical periodontitis. This study aimed to analyze the antibacterial activity and mechanisms of Au@Ag nanoparticles (NPs) combined with photothermal therapy (PTT) against the original and Ag+-resistant E. faecalis. Methods: Au@AgNPs with optimal shell thicknesses were synthesized and characterized. The antibacterial activity of Au@AgNPs with PTT against the original or Ag+-resistant E. faecalis was evaluated, and the antibiofilm activity was tested on E. faecalis biofilm on the dentin of teeth. The potential antibacterial mechanisms of Au@AgNPs combined with PTT against E. faecalis have also been studied. Moreover, its influence on dentin microhardness and cytotoxicity was assessed. Results: This study revealed that Au@AgNPs combined with PTT showed enhanced antibacterial and antibiofilm effects, no negative effects on dentin microhardness, and low cytotoxicity toward human periodontal ligament cells (hPDLCs). Moreover, Au@AgNPs combined with PTT effectively inhibited the growth of Ag+-resistant E. faecalis. Its antibacterial effects may be exerted through the release of silver ions (Ag+), destruction of the cell membrane, production of reactive oxygen species (ROS) and inhibition of adenosine triphosphate (ATP) production. Hyperthermia generated by Au@AgNPs with PTT reduced membrane fluidity and enhanced Ag+ sensitivity by downregulating fabF expression. The upregulated expression of heat shock genes demonstrated that the Ag+ released from Au@AgNPs compromised the heat adaptation of E. faecalis. Conclusion: PTT significantly enhanced Ag+ sensitivity of the original and Ag+-resistant E. faecalis. Au@AgNPs combined with PTT may have the potential to be developed as a new antibacterial agent to control E. faecalis infections in teeth.

Dentin erosive wear is reduced by fluoride varnishes containing nanosized sodium trimetaphosphate in vitro.

This study evaluated the effect of fluoride varnishes containing micrometric or nanosized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. Bovine root dentin blocks were selected by surface hardness and randomly divided into five experimental groups/varnishes (n = 20/group): placebo, 5% sodium fluoride (NaF); 5% NaF+5% micrometric TMP; 5% NaF+2.5% nanosized TMP; and 5% NaF+5% nanosized TMP. Half of the surface of all blocks received a single application of the assigned varnish, with subsequent immersion in artificial saliva for 6 h. Varnishes were then removed and the blocks were immersed in citric acid (90 s, 4×/day, 5 days). After each erosive cycle, ten blocks of each group were immersed in a placebo dentifrice for 15 s (ERO), while the other ten blocks were subjected to abrasion by brushing (ERO+ABR). Dentin erosive wear was assessed by profilometry. Data were submitted to 2-way ANOVA and to the Holm-Sidak test (p<0.05). Dentin erosive wear was significantly higher for ERO+ABR than for ERO for all varnishes. TMP-containing varnishes promoted superior effects against dentin erosive wear compared with 5% NaF alone; and 5% nanosized TMP led to the lowest wear among all varnishes. In conclusion, the addition of TMP to conventional fluoride varnish (i.e., varnish containing only NaF) enhanced its protective effects against bovine root dentin erosion and erosion+abrasion. Additionally, the use of 5% nanosized TMP led to superior effects in comparison to 5% micrometric TMP, both for erosion and erosion+abrasion in vitro.

Impact of Pericervical Dentin on Fracture Resistance of Endodontically Treated Posterior Permanent Teeth: A Systematic Review and Meta-analysis.

OBJECTIVE: The main aim of this present systematic review is to evaluate if the preservation of pericervical dentin (PCD) increases the fracture resistance of endodontically treated permanent posterior teeth. MATERIALS AND METHODS: Two independent reviewers conducted a comprehensive review of all published studies from 2007 (1/1/2007) to 2023 (31/5/23) since the concept of PCD first appeared in the literature in 2007. Searches were conducted in multiple electronic database engines: PubMed, Scopus, EBSCO (Dentistry and oral health sciences), Web of Sciences (WOS), Cochrane, Google Scholar and Open Grey, Ovid and Shodhganga, in addition to cross-references and hand search. Articles were chosen according to a certain inclusion and exclusion criteria, which, in brief, are laboratory-based studies published in English that assess the impact of PCD on fracture resistance of endodontically treated permanent posterior teeth. Using domains, such as sample size, sample dimensions, and control group as quality assessment criteria, evaluated the selected articles and classified them according to their risk of bias into low, moderate, and high. A meta-analysis was conducted using random effects modeling at a significance level of p < 0.05. RESULTS: A total of studies 6,043 were retrieved from 10 different electronic search databases and hand searches, but only 12 laboratory-based studies were selected after removing duplicates and applying the eligibility criteria. Of the included 12 studies, nine studies showed low risk of bias and three studies showed moderate risk of bias. Two studies showed related data for meta-analysis, the difference observed between the two studies is statistically non-significant. CONCLUSION: Based on the results of the study, there is evidence to support that PCD preservation offers fracture resistance to the endodontically treated posterior teeth. CLINICAL SIGNIFICANCE: The practice of conservative cavity preparation and avoiding the usage of instruments with high taper increases the fracture resistance of the tooth by retaining the PCD. How to cite this article: Haridoss S, Rajendran M, Swaminathan K, et al. Impact of Pericervical Dentin on Fracture Resistance of Endodontically Treated Posterior Permanent Teeth: A Systematic Review and Meta-analysis. J Contemp Dent Pract 2024;25(4):372-385.

Effect of herbal irrigants on surface roughness of intraradicular dentin using quantitative method of 3D surface texture analysis.

Replacing the conventional endodontic irrigants with herbal agents could avoid complications associated with using sodium hypochlorite (NaOCl). Endodontic irrigants alter the surface roughness of the dentinal wall surface, which affects sealer mechanical retention. This study aimed to assess the effect of experimental herbal Moringa oleifera and orange peel extract irrigant on intraradicular dentin (IRD) surface roughness using quantitative 3D surface analysis by scanning electron microscopy (SEM) regarding the smear layer assessment. Sixty human root sections were divided into four groups (n = 15): NaOCl combined with 17% ethylenediaminetetraacetic acid (EDTA); negative control (saline); moringa extract (MO); and orange oil (OO). SEM images were assessed quantitatively for surface roughness (Ra) in the coronal, middle, and apical IRD. The data were analysed by Kruskal-Wallis, Friedman, and Dunn's tests. All groups showed statistically significant differences (P = 0.007). MO exhibited significantly greater Ra values at the coronal, middle, and apical root levels than OO (P = 0.007, 0.009, and 0.046, respectively). There was no significant change in Ra values at various root levels within each group at P = 0.091, 0.819, 0.819, and 0.549 for the EDTA, saline, MO, and OO groups. Considerable (IRD) surface roughness analysis makes Moringa extract a promising herbal endodontic irrigant alternative to the NaOCl plus EDTA regimen.

Evaluation of Monomer-containing Isocyanate Groups on Stabilizing Demineralized Dentin Matrix Against Bond Interface Degradation.

PURPOSE: To evaluate the effect of urethane methacrylate precursor (UMP) on the enzymatic resistance of demineralized dentin (DD) matrices. MATERIALS AND METHODS: Experimental treatments containing 0 (control), 1, and 5 mmol/L UMP dissolved in an acetone (Ace) solution were formulated. Dentin matrix specimens were demineralized in vitro and immersed in the experimental treatments for 1 h. The treated specimens were then stored in 0.1 mg/mL collagenase solution for 24 h, after which their dry mass loss and hydroxyproline (HYP) release were assessed. The swelling ratios of specimens in each group were also evaluated. The interaction between UMP and the dentin matrix was observed using field-emission scanning electron microscopy (FE-SEM). Endogenous enzyme activity in dentin was evaluated using confocal laser scanning microscopy (CLSM). RESULTS: Compared with the other treatment groups, treatment with 1 mM and 5 mM UMP-Ace significantly decreased the dry mass loss, HYP release and swelling ratio of the DD matrix (p < 0.05). FE-SEM and CLSM observations showed that treatment with UMP-Ace protected the structure of the dentin matrix and decreased porosity within the dentin-collagen network. CONCLUSION: Treatment with 1 mM and 5 mM UMP-Ace protects DD matrix against collagenase degradation and may be clinically useful for improving the durability of the hybrid layer.

Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study.

AIM: The purpose of this study was to evaluate the effectiveness and strength of three various dentin-bonding agents used with adhesives on primary teeth. MATERIALS AND METHODS: The study used 80 recently extracted, healthy human maxillary anterior primary teeth that had undergone physiologic resorption, or over-retention. Teeth were cut to expose a flat dentin surface at a depth of 1.5 mm. All samples were divided into four groups (20 samples in each group) as follows: Group I-Control group, Group II-Primary teeth bonding with 6th-generation bonding agent, Group III-Primary teeth bonding with 7th-generation bonding agent, Group IV-Primary teeth bonding with 8th-generation bonding agent. All of the samples' dentinal surfaces were covered with composite resin using a Teflon mold after adhesive had been applied. A universal testing machine (INSTRON) was used to assess the shear bond strength. Data were collected and statistically analyzed. RESULTS: The maximum mean shear bond strength was found in 8th-generation bonding agent (30.76 ± 0.16), followed by 7th-generation bonding agent (26.08 ± 0.21), 6th-generation bonding agent (25.32 ± 0.06), and control group (6.18 ± 0.09). Statistically significant difference was found between the three different bonding agents (p < 0.001). CONCLUSION: On conclusion, the 8th-generation bonding agent demonstrated a greater shear bond strength to dentin than the 7th and 6th-generation bonding agent. CLINICAL SIGNIFICANCE: The emergence of different bonding techniques to the market improves the durability and quality of restorations. An effective bonding to the tooth would also reduce bacterial penetration, marginal microleakage, possibility of pulpal inflammation preserve tooth structure, and postoperative sensitivity by allowing less cavity preparation. How to cite this article: Alqarni AS, Al Ghwainem A. Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study. J Contemp Dent Pract 2024;25(4):342-345.

Complete versus incomplete caries removal procedures and their effects on dental pulp in primary teeth - An in vivo study.

INTRODUCTION: Dental caries results from an ecologic shift within the dental biofilm from a balanced population of microorganisms to an acidogenic, aciduric, and cariogenic microbiological population developed and maintained by frequent consumption of fermentable dietary carbohydrates. Total caries removal (TCR) of deep lesion may result in pulpal exposure requiring more invasive treatment. Hence, current pediatric dentistry has shifted to minimally invasive treatment that avoids more complex, time-consuming procedure, and the child's discomfort. AIM: The aim of this study is to evaluate and compare clinical performance and radiographic changes after complete and incomplete caries removal procedures. MATERIALS AND METHODS: The study was conducted on 60 primary molars in children aged 6-9 years. Selected 60 primary molars were randomly divided into two groups. Group 1 (PCR): infected dentin was removed, while the affected dentin was maintained on the pulpal wall. Group 2 (TCR): both infected and affected dentin were removed through low-speed carbide bur and hand excavator. Teeth were evaluated at 4 and 6 months clinically and radiographically. RESULTS: The proportion was compared using Fisher's exact test. The Statistical Package for the Social Sciences version 21 was used for analysis. The level of significance was kept at 5%. CONCLUSION: The clinical and radiographic success rates of ICR and CCR in primary teeth with deep carious lesions were high and did not differ significantly, indicating that the retention of carious dentin does not interfere with pulp vitality. Thus, ICR is a reliable minimally invasive approach that might replace the CCR in primary teeth when correctly indicated.

Improving the Prognosis of Periodontally Involved Teeth at the Time of Extraction of Adjacent Teeth With an Amnion-Chorion Barrier and Bioactive Dentin Graft.

With increased awareness, both in the dental literature and by the general public, of peri-implant disease, a growing trend in dentistry is to save teeth with a "questionable" periodontal prognosis. This prospective study involving such patients was designed to evaluate the effects of combining a bioactive barrier and graft, not on the socket but to augment adjacent periodontal conditions on teeth with severe periodontal bone loss at the time of extraction of an adjacent tooth. Fifteen patients were selected; teeth were extracted, ground, prepared with a pH 11 cleanser, partially demineralized, and made into a graft. This mixture was used to augment socket volume and perform periodontal regenerative surgery. The graft was covered with a bioactive amnion-chorion barrier membrane. Bioactive membranes can stimulate host cells in the surrounding gingival and periosteal tissues to accelerate site closure and healing, simultaneously exerting positive effects on the underlying bone and graft material not observed to the same extent with other membranes. This can improve healing and site regeneration as shown clinically and radiographically in this report. Use of these bioactive barrier membrane and dentin graft materials may have additive effects and provide stimulus for conversion to host bone after site healing. The combination of an amnion-chorion membrane with autologous dentin graft appears to maximize the benefits of the individual materials, improving guided tissue regeneration results and the prognoses of periodontally involved teeth.

Engineering Interfacial Integrity with Hydrolytic-Resistant, Self-Reinforcing Dentin Adhesive.

The leading cause of composite restoration failure is secondary caries, and although caries is a multifactorial problem, weak, damage-prone adhesives play a pivotal role in the high susceptibility of composite restorations to secondary caries. Our group has developed synthetic resins that capitalize on free-radical polymerization and sol-gel reactions to provide dental adhesives with enhanced properties. The resins contain γ-methacryloxypropyltrimethoxysilane (MPS) as the Si-based compound. This study investigated the properties of methacrylate-based resins containing methacryloxymethyltrimethoxysilane (MMeS) as a short-chain alternative. The degree of conversion (DC), polymerization kinetics, water sorption, mechanical properties, and leachates of MMeS- and MPS-resins with 55 and 30 wt% BisGMA-crosslinker were determined. The formulations were used as model adhesives, and the adhesive/dentin (a/d) interfaces were analyzed using chemometrics-assisted micro-Raman spectroscopy. The properties of the 55 wt% formulations were comparable. In the 30 wt% BisGMA formulations, the MMeS-resin exhibited faster polymerization, lower DC, reduced leachates, and increased storage and loss moduli, glass transition (Tg), crosslink density, and heterogeneity. The spectroscopic results indicated a comparable spatial distribution of resin, mineralized, and demineralized dentin across the a/d interfaces. The hydrolytically stable experimental short-chain-silane-monomer dental adhesive provides enhanced mechanical properties through autonomous strengthening and offers a promising strategy for the development of restorative dental materials with extended service life.

Evaluation of dentin features in teeth after caries removal by three techniques (chemomechanical, mechanical with a smart bur, and air-abrasion): an in vitro study.

Background: Different methods for removing dental carious lesions exist, including conventional rotary caries removal and new advanced technology like polymer-based burs, chemomechanical agents, air abrasion, and laser. Objectives: This study shows the differences in features of dentin (smear layer, patency of dentinal tubules, surface irregularities, intertubular micro porosities, and exposed dentinal tubules) among different types of caries removal techniques. Materials and Methods: An in vitro study was done on 60 primary molars with occlusal class I active caries. Teeth were divided into three groups according to a method of caries removal (G1: chemomechanical, G2: mechanical with a smart bur, and G3: air-abrasion). After complete caries excavation, the teeth were examined under a scanning electronic microscope (SEM) with the power of magnification 4,000x and 8,000x to show the morphological dentinal features with SEM microphotographs. Data obtained was analyzed using the SPSS program where Fisher exact, Kruskal-Wallis and multiple Wilcoxon sum rank tests were used. The level of significance is when the p-value is less than 0.05. Results: Generally, SEM showed the highest ratio of score 1 of smear layer presence, surface irregularities, and microporosity in all groups in both magnifications. The patency of tubules showed the highest ratio of score 1 in G1, scores 2 in both G2 and G3 in magnification 4,000x, while 8,000x there was the highest ratio of its score 1 in G1 and G2 while the G3 has score 2 as the highest score. The exposed dentinal tubules showed the highest ratio in G1 in score 3, in G2 in score 2, and in G3 in score 1 in magnification 4,000x, while 8,000x there was the highest ratio of its score 2 in both G1 and G3 while the G3 has highest score 1. The study with magnification 4,000x showed a significant difference (S) among three groups in exposed dentinal tubules with a p-value (0.012), and there was S between chemomechanical and smart, chemomechanical and air-abrasions groups with a p-value (0.041, 0.001 subsequentially). Other dentin features showed non-significant differences (NS) among or between groups in both magnifications (4,000x, 8,000x). Conclusions: All groups were effective in removing caries and can successfully treat young, scared or stressed patients. All methods of caries removal produce clinically parametric changes in the residual dentin.

The damage and remineralization strategies of dental hard tissues following radiotherapy.

OBJECTIVES: This study pursued two main purposes. The first aim was to expound on the microscopic factors of radiation-related caries (RRC). Further, it aimed to compare the remineralization effect of different remineralizing agents on demineralized teeth after radiotherapy. METHODS: The enamel and dentin samples of bovine teeth were irradiated with different doses of radiation. After analysis of scanning electron microscope (SEM), X-Ray diffraction (XRD), and energy dispersive spectrometer (EDS), the samples irradiated with 50 Gy radiation were selected and divided into the demineralization group, the double distilled water (DDW) group, the Sodium fluoride (NaF) group, the Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) group, the NaF + CPP-ACP group, and the Titanium tetrafluoride (TiF4) group. After demineralization, remineralizing agents treatment, and remineralization, the samples were evaluated using SEM, atomic force microscope (AFM), EDS, and transverse microradiography (TMR). RESULTS: A radiation dose of 30 Gy was sufficient to cause damage to the dentinal tubules, but 70 Gy radiation had little effect on the microstructure of enamel. Additionally, the NaF + CPP-ACP group and the TiF4 group significantly promoted deposit formation, decreased surface roughness, and reduced mineral loss and lesion depth of demineralized enamel and dentin samples after radiation. CONCLUSIONS: Radiation causes more significant damage to dentin compared to enamel. NaF + CPP-ACP and TiF4 had a promising ability to promote remineralization of irradiated dental hard tissues. ADVANCES IN KNOWLEDGE: This in vitro study contributes to determining a safer radiation dose range for teeth and identifying the most effective remineralization approach for RRC.

Effect of applying carbodiimide combined with a two-step self-etch adhesive durability.

BACKGROUND: This study investigated the effect of carbodiimide (EDC) combined with Clearfil SE self-etch adhesive on the shear bond strength (SBS), crosslinking degree, denaturation temperature, and enzyme activity of dentin in vitro. MATERIALS AND METHODS: Collected human sound third molars were randomly divided into different groups with or without EDC treatment (0.01-1 M). The specimens (n = 16)were stored for 24 h (immediate) or 12 months (aging) before testing the SBS. Fine dentin powder was obtained and treated with the same solutions. Then the crosslinking degree, denaturation temperature (Td), and enzyme activity were tested. Statistical analysis was performed using a one-way analysis of variance (ANOVA) to compare the differences of data between groups (α = 0.05). RESULTS: There was a significant drop in immediate SBS and more adhesive fracture of 1.0 M EDC group, while there were no significant differences among the other groups. SEM showed a homogeneous interface under all treatments. After 12 months of aging, the SBS significantly decreased. Less decreases of SBS in the 0.3 and 0.5 M groups were found. Due to thermal and enzymatical properties consideration, the 0.3 and 0.5 M treatments also showed higher cross-link degree and Td with lower enzyme activity. CONCLUSION: 0.3 and 0.5 M EDC may be favorable for delaying the aging of self-etch bond strength for 12 months. But it is still needed thoroughly study.

Does dynamic navigation system preserve more dentine? - A systematic review.

OBJECTIVE: This systematic review aims to comparatively analyse the amount of dentin removal by free hand and static guided endodontics with dynamic navigation system (DNS) in endodontic access cavity preparation. METHODS: The systematic review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines. Based on the structured PICO framework of "Comparative evaluation of dynamic navigation system (I) to freehand (C) and static guided endodontics (C) in endodontic access cavity preparation on the preservation of tooth structure (O) when assessed on permanent human teeth (P)", the keywords were formulated and the articles were retrieved from three databases namely PubMed, Scopus and Embase, based on the keywords from the time of inception of DNS till June 2023. The risk of bias assessment was done using a modified Joanne Briggs Institute checklist, which evaluated domains such as randomisation, sample size, image acquisition using CBCT, angulation, accuracy and time taken. As the data was heterogenous, a quantitative meta-analysis was not performed. RESULTS: Initially, 174 articles were retrieved from the three databases, 30 duplicates were removed, after title check 108 articles were excluded and following abstract check only 10 articles qualified for full text analysis. On reviewing the 10 full text articles, 5 articles were excluded and the remaining 5 articles were subjected to the risk of bias analysis which showed that 2 articles displayed low risk of bias and three articles showed high risk of bias. The RoB analysis revealed that only 2 studies evaluated the preservation of dentin in terms of accuracy, angulation and time taken proving the increased precision with minimal loss of tooth structure using DNS. In both the studies, DNS proved to be superior to free hand technique in terms of precision, accuracy and efficiency in locating the canals during access cavity preparation with maximal preservation of tooth structure. CONCLUSION: With the minimal literature evidences, the present systematic review highlights maximal preservation of dentin using DNS. However, further invitro and invivo studies comparing the free hand, static guided endodontics to DNS must be carried out for its translation into clinical practice. CLINICAL SIGNIFICANCE: Dynamic navigation system provides maximal preservation of dentin during access cavity preparation.

Dentin Mechanobiology: Bridging the Gap between Architecture and Function.

It is remarkable how teeth maintain their healthy condition under exceptionally high levels of mechanical loading. This suggests the presence of inherent mechanical adaptation mechanisms within their structure to counter constant stress. Dentin, situated between enamel and pulp, plays a crucial role in mechanically supporting tooth function. Its intermediate stiffness and viscoelastic properties, attributed to its mineralized, nanofibrous extracellular matrix, provide flexibility, strength, and rigidity, enabling it to withstand mechanical loading without fracturing. Moreover, dentin's unique architectural features, such as odontoblast processes within dentinal tubules and spatial compartmentalization between odontoblasts in dentin and sensory neurons in pulp, contribute to a distinctive sensory perception of external stimuli while acting as a defensive barrier for the dentin-pulp complex. Since dentin's architecture governs its functions in nociception and repair in response to mechanical stimuli, understanding dentin mechanobiology is crucial for developing treatments for pain management in dentin-associated diseases and dentin-pulp regeneration. This review discusses how dentin's physical features regulate mechano-sensing, focusing on mechano-sensitive ion channels. Additionally, we explore advanced in vitro platforms that mimic dentin's physical features, providing deeper insights into fundamental mechanobiological phenomena and laying the groundwork for effective mechano-therapeutic strategies for dentinal diseases.

Color change of tooth-colored restorative materials bonded to silver diamine fluoride-treated dentine: a systematic review.

BACKGROUND: The desirable properties of silver diamine fluoride (SDF) make it an effective agent for managing dental caries and tooth hypersensitivity. There are several clinical instances that SDF application might precede the placement of direct tooth-colored restorations. On the other hand, SDF stains demineralized/carious dental tissues black, which might affect the esthetic outcomes of such restorations. Color is a key parameter of esthetics in dentistry. Therefore, this study aims to systematically review dental literature on color/color change of tooth-colored restorations placed following the application of SDF on dentine. METHODS: Comprehensive search of PubMed, Embase, Scopus and ISI Web of Science databases (until August 2023) as well as reference lists of retrieved studies was performed. In vitro studies reported color or color change of tooth-colored restorative materials applied on SDF-treated dentine were included. Methodological quality assessment was performed using RoBDEMAT tool. Pooled weighted mean difference (WMD) and 95% confidence interval (95% CI) was calculated. RESULTS: Eleven studies/reports with a total of 394 tooth-colored restorations placed following a) no SDF (control) or b) SDF with/without potassium iodide (KI)/glutathione dentine pre-treatments were included. Color change was quantified using ∆E formulas in most reports. The pooled findings for the comparison of resin-based composite (RBC) restorations with and without prior 38% SDF + KI application revealed no statistically significant differences in ∆E values at short- and long-term evaluations (~ 14 days: WMD: -0.56, 95% CI: -2.09 to 0.96; I2: 89.6%, and ~ 60 days: WMD: 0.11; 95% CI: -1.51 to 1.72; I2: 76.9%). No studies provided sufficient information for all the items in the risk of bias tool (moderate to low quality). CONCLUSIONS: The limited evidence suggested comparable color changes of RBC restorations with and without 38% SDF + KI pre-treatment up to 60 days. The included studies lacked uniformity in methodology and reported outcomes. Further studies are imperative to draw more definite conclusions. PROTOCOL REGISTRATION: The protocol of this systematic review was registered in PROSPERO database under number CRD42023485083.