ABSTRACT
Although biocides are important materials in modern society and help protect human health and the environment, increasing exposure to combined biocides can cause severe side effects in the human body, such as lung fibrosis. In this study, we developed a receptonics system to screen for biocides in combined household chemical products based on biocides. The system contains transient receptor potential ankyrin 1 (TRPA1) nanovesicles (NVs) to sense biocides based on pain receptors and a side-gated field-effect transistor (SGFET) using a single-layer graphene (SLG) micropattern channel. The binding affinities between the TRPA1 receptor and the various biocides were estimated by performing biosimulation and using a calcium ion (Ca2+) assay, and the sensitivity of the system was compared with that of TRPA1 NV receptonics systems. Based on the results of the TRPA1 NV receptonics system, the antagonistic and potentiation effects of combined biocides and household chemical products depended on the concentration. Finally, the TRPA1 NV receptonics system was applied to screen for biocides in real products, and its performance was successful. Based on these results, the TRPA1 NV receptonics system can be utilized to perform risk evaluations and identify biocides in a simple and rapid manner.
Subject(s)
Disinfectants , TRPA1 Cation Channel , TRPA1 Cation Channel/metabolism , Disinfectants/toxicity , Disinfectants/chemistry , Humans , Graphite/toxicity , Graphite/chemistry , HEK293 Cells , Calcium/metabolism , Transistors, ElectronicABSTRACT
Since the onset of the SARS-CoV-2 pandemic in early 2020, there has been a notable rise in sodium hypochlorite disinfectants. Sodium hypochlorite undergoes hydrolysis to generate hypochlorous acid for virus eradication. This chlorine-based disinfectant is widely utilized for public disinfection due to its effectiveness. Although sodium hypochlorite disinfection is convenient, its excessive and indiscriminate use can harm the water environment and pose a risk to human health. Hypochlorous acid, a reactive oxygen species, plays a crucial role in the troposphere, stratospheric chemistry, and oxidizing capacity. Additionally, hypochlorous acid is vital as a reactive oxygen species in biological systems, and its irregular metabolism and level is associated with several illnesses. Thus, it is crucial to identify hypochlorous acid to comprehend its environmental and biological functions precisely. Here, we constructed a new fluorescent probe, utilizing the twisted intramolecular charge transfer mechanism to quickly and accurately detect hypochlorous acid in environmental water and biosystems. The probe showed a notable increase in fluorescence when exposed to hypochlorous acid, demonstrating its excellent selectivity, fast response time (less than 10â¯seconds), a large Stokes shift (â¼ 102â¯nm), and a low detection limit of 15.5â¯nM.
Subject(s)
Coumarins , Fluorescent Dyes , Hypochlorous Acid , Water Pollutants, Chemical , Hypochlorous Acid/chemistry , Fluorescent Dyes/chemistry , Coumarins/chemistry , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/toxicity , Animals , Disinfectants/chemistry , Disinfectants/analysis , Disinfectants/toxicity , Limit of DetectionABSTRACT
Research has demonstrated the difficulty associated with degrading the conventional 1-2 carbon aliphatic halogenated byproducts of disinfectant reactions with organic matter [disinfection byproducts (DBPs)] within advanced oxidation process (AOP) units in potable reuse trains, but the efficacy of AOP units for treating the emerging classes of halogenated aromatic DBPs is unclear. We herein demonstrate more effective removal of 28 halogenated aromatic DBPs in the UV/H2O2 AOP at 222 nm (UV222) than in the conventional UV/H2O2 AOP at 254 nm. Direct photolysis of 28 halogenated aromatic DBPs was greatly enhanced at 222 nm with fluence-based photodecay rate constants of 4.31 × 10-4-1.53 × 10-2 cm2 mJ-1, which was mainly attributed to the higher molar absorption coefficients of halogenated aromatic DBPs at 222 nm than 254 nm. Generally, quantum yields of halogenated aromatic DBPs at both 222 and 254 nm followed the order of halophenols > halohydroxybenzaldehydes > halonitrophenols. All 28 halogenated aromatic DBPs exhibit high reactivity toward HO⢠with second-order rate constants ranging from 2.18 × 109 to 1.15 × 1010 M-1 s-1 determined by X-ray radiolysis. The UV fluence required to achieve 90% loss of halogenated aromatic DBPs in the UV222/H2O2 AOP was 75-95% lower than that in the UV254/H2O2 AOP, and 90% removal of most tested halogenated aromatic DBPs can be achieved in the UV222/H2O2 AOP within the UV fluence levels commonly applied in potable reuse (700-1000 mJ cm-2).
Subject(s)
Disinfection , Hydrogen Peroxide , Oxidation-Reduction , Water Purification , Hydrogen Peroxide/chemistry , Water Purification/methods , Water Pollutants, Chemical/chemistry , Ultraviolet Rays , Drinking Water/chemistry , Disinfectants/chemistry , PhotolysisABSTRACT
This study aims to conduct a comprehensive analysis of switching disinfectants from sodium hypochlorite bleach to chlorine dioxide (ClO2) in the water distribution system of Geyikbayiri, Antalya. For this purpose, bulk decay rates of ClO2 at various water temperatures were determined in laboratory studies. The study revealed ClO2 bulk decay rates of 0.12639 day-1, 0.17848 day-1, and 0.19621 day-1 at temperatures 15°C, 20°C, and 30°C, respectively. The EPANET, a widely employed computer program for simulating the extended-period behavior of hydraulic and water quality in pressurized pipes, was utilized for the analysis of the fate and transport of ClO2. A hydraulic model was first developed, calibrated, and verified using distinct data sets. The Hazen-Williams friction coefficient of the PSA was determined to be 120 by the trial-and-error method with a mean absolute error (MAE) of 0.408 m. A ClO2 model was then integrated with the calibrated and verified hydraulic model, revealing a wall decay rate of 0.01 m/day and an average MAE of 0.034 mg/l. After calibration and verification of the ClO2 model, several management scenarios were developed, and ClO2 dosing rates were determined. The study showed that ClO2 dosing rates of 0.40 mg/l and 0.45 mg/l should be applied to keep ClO2 concentrations within certain limits. PRACTITIONER POINTS: Disinfectants must maintain a sufficient residual in water distribution systems. Chlorine dioxide requires less contact time and is not affected by pH fluctuations. Modeling serves as a decision-making tool for the management of disinfectants. Bulk and wall decay rates of chlorine dioxide are crucial for management strategies. Chlorine dioxide is a good alternative as a disinfectant in such systems.
Subject(s)
Chlorine Compounds , Oxides , Chlorine Compounds/chemistry , Oxides/chemistry , Models, Theoretical , Disinfectants/chemistry , Water Supply , Water Pollutants, Chemical/chemistryABSTRACT
The transmission of antibiotic resistance genes (ARGs) and the propagation of antibiotic resistant bacteria (ARB) threaten public health security and human health, and greener and more efficient disinfection technologies are expected to be discovered for wastewater treatment. In this study, natural pyrite and ascorbic acid (AA) were proposed as environmental-friendly activator and reductant for periodate (PI) activation to inactivate ARB. The disinfection treatment of PI/pyrite/AA system could inactivate 5.62 log ARB within 30 min, and the lower pH and higher PI and natural pyrite dosage could further boost the disinfection efficiency. The 1O2 and SO4â¢- were demonstrated to be crucial for the inactivation of ARB in PI/pyrite/AA system. The disinfection process destroyed the morphological structure of ARB, inducing oxidative stress and stimulating the antioxidant system. The PI/pyrite/AA system effectively reduced the intracellular and extracellular DNA concentration and ARGs abundance, inhibiting the propagation of ARGs. The presence of AA facilitated the activation of PI with natural pyrite and significantly increased the concentration of Fe2+ in solution. The reusability of natural pyrite, the safety of the disinfection by-products and the inhibition of ARB regeneration indicated the application potential of PI/pyrite/AA system in wastewater disinfection.
Subject(s)
Ascorbic Acid , Disinfection , Drug Resistance, Bacterial , Singlet Oxygen , Sulfides , Ascorbic Acid/pharmacology , Ascorbic Acid/chemistry , Sulfides/pharmacology , Sulfides/chemistry , Disinfection/methods , Drug Resistance, Bacterial/genetics , Iron/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Bacteria/drug effects , Bacteria/genetics , Disinfectants/pharmacology , Disinfectants/chemistry , Green Chemistry TechnologyABSTRACT
The presence of microplastics (MPs) products and particles in the environment can significantly impact the human body. Most MPs that enter the environment also enter the water cycle. During sunlight light irradiation (especially ultraviolet (UV) part) or UV disinfection, many of these MPs, particularly those rich in surface functional groups like thermoplastic polyurethanes (TPU), undergo physicochemical changes that can affect the formation of disinfection byproducts (DBPs). This study investigates the physicochemical changes of TPU in water after exposure to UV irradiation and incubation in the dark, as well as the formation of DBPs after chlorination. The results show that TPU undergo chain breakage, oxidation, and cross-linking when exposed to UV irradiation in an aqueous system. This leads to fragmentation into smaller particles, which facilitates the synthesis of DBPs. Subsequent research has demonstrated that the TPU leaching solution produces a significantly higher DBP content than the chlorination of TPU MPs, particularly at high concentrations of CHCl3. Therefore, it is important to give greater consideration to the soluble DBP precursors released by TPU.
Subject(s)
Disinfection , Polyurethanes , Ultraviolet Rays , Water Pollutants, Chemical , Polyurethanes/chemistry , Disinfection/methods , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/analysis , Microplastics/chemistry , Halogenation , Disinfectants/chemistry , Disinfectants/analysis , Water Purification/methodsABSTRACT
PURPOSE: To study the stability of physicochemical properties and sterilizing effect about two commercially available hypochlorous acid (HClO) products under simulated clinical conditions, and to evaluate the compatibility of HClO on soft and hard tissues and cells in oral cavity. METHODS: Samples of HClO solution with different production processes were prepared, to detect the changes of physicochemical indexes of each sample over time under simulated clinical conditions (shielded from light at 20-25 â, open the cover for 5 minutes every day), including free available chlorine, oxidation-reduction potential and pH. Through suspension quantitative germicidal test, the antibiosis-concentration curve of HClO solution was made, so as to calibrate the change of antibacterial ability of disinfectant with the decrease of available chlorine content during storage. Pulp, tongue and dentine were immersed in PBS, 100 ppm HClO, 200 ppm HClO and 3% NaClO. The influence on soft and hard tissues was evaluated by weighing method and microhardness test. The toxic effects of HClO, NaClO and their 10-fold diluent on human gingival fibroblasts were determined by CCK-8 cytotoxicity assay. GraphPad PRIS 8.0 software was used to analyze the data. RESULTS: Under simulated conditions, the free available chlorine (FAC) of HClO solution decayed with time, and the attenuation degree was less than 20 ppm within 1 month. The bactericidal effect of each HClO sample was still higher than 5log after concentration decay. There was no obvious dissolution and destruction to soft and hard tissues for HClO(Pï¼0.05). The cell viability of HClO to human gingival fibroblast cells (HGFC) was greater than 80%, which was much higher than 3% NaClO (Pï¼0.001). CONCLUSIONS: The bactericidal effect and stability of HClO solution can meet clinical needs, which has low cytotoxicity and good histocompatibility. It is expected to become a safe and efficient disinfection product in the field of living pulp preservation and dental pulp regeneration.
Subject(s)
Fibroblasts , Hypochlorous Acid , Mouth , Hypochlorous Acid/chemistry , Humans , Mouth/drug effects , Fibroblasts/drug effects , Gingiva/cytology , Gingiva/drug effects , Irritants , Disinfectants/pharmacology , Disinfectants/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistryABSTRACT
There has been numerous research on the uses of treated wastewater that needs chlorine disinfection, but none have looked at the impacts of injecting nanobubbles (NBs) on the decomposition of residual chlorine. Gas NB injection in treated wastewater improves its properties. The kinetics of disinfectant decay could be impacted by changes in treated wastewater properties. This paper studies the effect of various NB injections on the residual chlorine decay of secondary treated wastewater (STWW). It also outlines the empirical equations that were developed to represent these impacts. The results show that each type of NBs in treated wastewater had a distinct initial chlorine concentration. The outcomes demonstrated a clear impact on the decrease of the needed chlorine quantity and the reduction of chlorine decay rate when utilizing NB injection for the STWW. As a result, the residual chlorine will remain for a longer time and will resist any microbiological growth under the application of NBs on treated wastewater. Moreover, NBs in secondary treated effluent reduce chlorine usage, lowering wastewater disinfection costs.
Subject(s)
Chlorine , Wastewater , Chlorine/chemistry , Wastewater/chemistry , Waste Disposal, Fluid/methods , Disinfection/methods , Water Purification/methods , Disinfectants/chemistry , Disinfectants/pharmacologyABSTRACT
The paper reports new hydrogels based on quaternary ammonium salts of chitosan designed as biocidal products. The chitosan derivative was crosslinked with salicylaldehyde via reversible imine bonds and supramolecular self-assemble to give dynamic hydrogels which respond to environmental stimuli. The crosslinking mechanism was demonstrated by 1H NMR and FTIR spectroscopy, and X-ray diffraction and polarized light microscopy. The hydrogel nature, self-healing and thixotropy were proved by rheological investigation and visual observation, and their morphology was assessed by scanning electron microscopy. The relevant properties for application as biocidal products, such as swelling, dissolution, bioadhesiveness, antimicrobial activity and ex-vivo hemocompatibility and in vivo local toxicity and biocompatibility on experimental mice were measured and analyzed in relationship with the imination degree and the influence of each component. It was found that the hydrogels are superabsorbent, have good adhesivity to skin and various surfaces and antimicrobial activity against relevant gram-positive and gram-negative bacteria, while being hemocompatible and biocompatible. Besides, the hydrogels are easily biodegraded in soil. All these properties recommend the studied hydrogels as ecofriendly biocidal agents for living tissues and surfaces, but also open the perspectives of their use as platform for in vivo applications in tissue engineering, wound healing, or drug delivery systems.
Subject(s)
Biocompatible Materials , Chitosan , Hydrogels , Quaternary Ammonium Compounds , Chitosan/chemistry , Chitosan/pharmacology , Hydrogels/chemistry , Hydrogels/pharmacology , Quaternary Ammonium Compounds/chemistry , Quaternary Ammonium Compounds/pharmacology , Animals , Biocompatible Materials/pharmacology , Biocompatible Materials/chemistry , Mice , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , Microbial Sensitivity Tests , Disinfectants/pharmacology , Disinfectants/chemistry , Anti-Infective Agents/pharmacology , Anti-Infective Agents/chemistry , Gram-Negative Bacteria/drug effects , Gram-Positive Bacteria/drug effects , AldehydesABSTRACT
As a marine antifouling biocide, 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT) exhibited high toxicity to marine organisms. This study investigated the interaction between DCOIT and human serum albumin (HSA) using several spectroscopic techniques combined with computer prediction methods. The UV-vis absorption spectra, Stern-Volmer constant (KSV) and fluorescence resonance energy transfer (FRET) results indicated that DCOIT caused static quenching of HSA fluorescence. The ΔG°, ΔH° and ΔS° values were -31.03 ± 0.17 kJ·mol-1, -133.54 ± 0.88 kJ·mol-1 and -348.46 ± 2.86 J.mol-1·K-1, respectively, suggesting that van der Waals forces and hydrogen bonds governed the spontaneous formation of the complex. Synchronous fluorescence and circular dichroism (CD) spectroscopy observed the burial of Trp residues within HSA and the unfolding of HSA secondary structure induced by DCOIT. Three-dimensional (3D) fluorescence and Atomic Force Microscopy (AFM) further detected DCOIT-induced loosening of HSA peptide chain structure. Site displacement experiments indicated that DCOIT binding at site I of HSA. Computational predictions indicated that hydrophobic interactions were also essential in the complex. The increased RMSD, Rg, SASA, and RMSF confirmed that DCOIT weakened the stability and compactness of HSA, rendering residues more flexible. Lastly, esterase activity assays demonstrated that DCOIT inhibited esterase activity and interfered with the human detoxification process.
Subject(s)
Esterases , Microscopy, Atomic Force , Protein Binding , Serum Albumin, Human , Thiazoles , Humans , Serum Albumin, Human/chemistry , Serum Albumin, Human/metabolism , Esterases/chemistry , Esterases/metabolism , Thiazoles/chemistry , Molecular Docking Simulation , Disinfectants/chemistry , Disinfectants/pharmacology , Molecular Dynamics Simulation , Thermodynamics , Fluorescence Resonance Energy Transfer , Binding Sites , Circular Dichroism , Spectrometry, FluorescenceABSTRACT
Trace iron ions (Fe(III)) are commonly found in water and wastewater, where free chlorine is very likely to coexist with Fe(III) affecting the disinfectant's stability and N-DBPs' fate during UV/chlorine disinfection, and yet current understanding of these mechanisms is limited. This study investigates the effects of Fe(III) on the formation and toxicity alteration of halonitromethanes (HNMs), dichloroacetonitrile (DCAN), and dichloroacetamide (DCAcAm) from polyethyleneimine (PEI) during UV/chlorine disinfection. Results reveal that the maxima concentrations of HNMs, DCAN, and DCAcAm during UV/chlorine disinfection with additional Fe(III) were 1.39, 1.38, and 1.29 times higher than those without additional Fe(III), instead of being similar to those of Fe(III) inhibited the formation of HNMs, DCAN and DCAcAm during chlorination disinfection. Meanwhile, higher Fe(III) concentration, acidic pH, and higher chlorine dose were more favorable for forming HNMs, DCAN, and DCAcAm during UV/chlorine disinfection, which were highly dependent on the involvement of HO· and Cl·. Fe(III) in the aquatic environment partially hydrolyzed to the photoactive Fe(III)hydroxyl complexes Fe(OH)2+ and [Fe(H2O)6]3+, which undergone UV photoactivation and coupling reactions with HOCl to achieve effective Fe(III)/Fe(II) interconversion, a process that facilitated the sustainable production of HO·. Extensive product analysis and comparison verified that the HO· production enhanced by the Fe(III)/Fe(II) internal cycle played a primary role in increasing HNMs, DCAN, and DCAcAm productions during UV/chlorine disinfection. Note that the incorporation of Fe(III) increased the cytotoxicity and genotoxicity of HNMs, DCAN, and DCAcAm formed during UV/chlorine disinfection, and yet Fe(III) did not have a significant effect on the acute toxicity of water samples before, during, and after UV/chlorine disinfection. The new findings broaden the knowledge of Fe(III) affecting HNMs, DCAN, and DCAcAm formation and toxicity alteration during UV/chlorine disinfection.
Subject(s)
Disinfection , Disinfection/methods , Ultraviolet Rays , Chlorine/chemistry , Polyethyleneimine/chemistry , Acetonitriles/chemistry , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/toxicity , Iron/chemistry , Water Purification/methods , Acetamides/chemistry , Acetamides/toxicity , Disinfectants/chemistryABSTRACT
Under the condition that the residual chlorine is guaranteed, the biofilm still thrives in drinking water distribution systems through secreting a large number of extracellular polymeric substances (EPS), in which protein components are the primary precursor of disinfection byproducts (DBPs), mostly in the form of combined amino acids. The aim of this study is to investigate the action of CuO on the formation of halates (XO3-, ClO3- and BrO3-) and DBPs (trihalomethanes, THMs; haloacetonitriles, HANs) with aspartic acid tetrapeptide (TAsp) as protein surrogate. The presence of CuO promoted the self-decay rather than TAsp-induced decay of oxidants, resulting in an increase in XO3- yield and a decrease in DBPs yield. It was CuO-induced weaker production of cyanoacetic acid and 3-oxopropanoic acid that induced the decreased yields of HANs and THMs, respectively. The FTIR and Raman spectra indicate a weak complexation between CuO and TAsp. Given this, the CuO-HOX/OX- complexes were inferred to be reactive to HOX/OX- but less reactive to TAsp. The study helps to better understand the formation of XO3- and DBPs during the chlorination of EPS, and propose precise control strategies when biofilm boosts in water pipes.
Subject(s)
Aspartic Acid , Copper , Disinfectants , Disinfection , Halogenation , Water Purification , Copper/chemistry , Aspartic Acid/chemistry , Disinfectants/chemistry , Water Purification/methods , Water Pollutants, Chemical/chemistry , Trihalomethanes/chemistry , Peptides/chemistry , Peptides/metabolismABSTRACT
Disinfection efficiency and disinfection byproduct (DBP) formation are two important aspects deserving careful consideration when evaluating different disinfection protocols. However, most of the previous studies on the selection of disinfection methods by comparing DBP formation were carried out under the same initial/residual dose and contact time of different disinfectants, and such a practice may cause overdose or underdose of a certain disinfectant, leading to the inaccurate evaluation of disinfection. In this study, a comprehensive and quantitative comparison of chlorine (Cl2) and chlorine dioxide (ClO2) disinfection was conducted with regard to their DBP formation under equal disinfection efficiency. The microbial inactivation models as well as the Cl2 and ClO2 demand models were developed. On such basis, the integral CT (ICT) values were determined and used as a bridge to connect disinfection efficiency and DBP formation. For 3-log10 and 4-log10 reductions of Pseudomonas aeruginosa, ClO2 had 1.5 and 5.8 times higher inactivation ability than Cl2, respectively. In the premise of equal disinfection efficiency (i.e., the ICT ratios of Cl2 to ClO2 = 1.5 and 5.8), the levels of total organic chlorine, total organic bromine, and total organic halogen formed in the Cl2 disinfection were significantly higher than those formed in the ClO2 disinfection. Among the 35 target aliphatic DBPs, trihalomethanes (THMs) and haloacetic acids (HAAs) were the dominant species formed in both Cl2 and ClO2 disinfection. The total THM levels formed in Cl2 disinfection were 14.6 and 30.3 times higher than those in ClO2 disinfection, respectively. The total HAA levels formed in Cl2 disinfection were 3.5 and 5.4 times higher than those in ClO2 disinfection, respectively. Formation of the target 48 aromatic DBPs was much favored in Cl2 disinfection than that in ClO2 disinfection, and the formation levels was dominated by contact time. This study demonstrated that ClO2 had significant advantages over Cl2, especially at higher microorganism inactivation and lower DBP formation requirements.
Subject(s)
Chlorine Compounds , Chlorine , Disinfectants , Disinfection , Drinking Water , Oxides , Water Purification , Chlorine Compounds/pharmacology , Chlorine Compounds/chemistry , Oxides/pharmacology , Oxides/chemistry , Chlorine/pharmacology , Chlorine/chemistry , Disinfection/methods , Disinfectants/pharmacology , Disinfectants/chemistry , Drinking Water/microbiology , Drinking Water/chemistry , Pseudomonas aeruginosa/drug effectsABSTRACT
One interesting field of research in the view of developing novel surfactants for pharmaceutical and cosmetic applications is the design of amphiphiles showing further bioactive properties in addition to those commonly displayed by surface-active compounds. We propose here the chemical synthesis, and characterization of 1-o-tolyl alkyl biguanide derivatives, having different lengths of the hydrocarbon chain (C3, C6, and C10), and showing surface active and antibacterial/disinfectant activities toward both Gram-positive and Gram-negative bacteria. Both surface active properties in terms of critical micelle concentration (CMC) and surface tension at CMC (γCMC), as well as the antimicrobial activity in terms of minimum inhibitory concentrations (MICs), were strongly dependent on the length of the hydrocarbon chain. Particularly, the C6 and C10 derivatives have a good ability to decrease surface tension (γCMC <40 mN/m) at low concentrations (CMC < 12 mM) and a satisfactory antibacterial effect (MIC values between 0.230 and 0.012 mM against S. aureus strains and between 0.910 and 0.190 against P.aeruginosa strains). Interestingly, these compounds showed a disinfectant activity at the tested concentrations that was comparable to that of the reference compound chlorhexidine digluconate. All these results support the possible use of these amphiphilic compounds as antibacterial agents and disinfectants in pharmaceutical or cosmetic formulations.
Subject(s)
Anti-Bacterial Agents , Biguanides , Microbial Sensitivity Tests , Surface Tension , Surface-Active Agents , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , Surface-Active Agents/chemistry , Surface-Active Agents/pharmacology , Surface-Active Agents/chemical synthesis , Biguanides/chemistry , Biguanides/pharmacology , Staphylococcus aureus/drug effects , Pseudomonas aeruginosa/drug effects , Micelles , Drug Compounding , Gram-Positive Bacteria/drug effects , Gram-Negative Bacteria/drug effects , Disinfectants/pharmacology , Disinfectants/chemistry , Chemistry, Pharmaceutical/methodsABSTRACT
Nitrogenous disinfection byproducts (N-DBPs) in water are carcinogenic, teratogenic, and mutagenic. In this work, we developed a biomimetic reduction approach based on the cysteine thiol that destructed the highly toxic, select nitrogenous haloacetamides (HAMs) and haloacetonitriles (HANs) while effectively controlling the cytotoxicity of the degradation products to serve as a basis for further technological applications (e.g. immobilized contact bed for terminal users). Mechanisms on toxicity control were elucidated. Results showed the degradation and cytotoxicity control of HAMs as more efficient than that of the HANs. The cytotoxicity of the chlorinated, brominated, and iodinated HAMs and HANs was reduced to 25 %- 0.25 % of the original after biomimetic reduction using a reasonable concentration ratio. Through a combination of thiol-specific reactivity, dehalogenation, and quantitative structure-activity relationship analyses, the major toxicity control mechanisms were found to be the reductive dehalogenation of the N-DBPs. The halogenated functional groups on the N-DBPs had a more pronounced effect than the amide and nitrile groups on the cytotoxicity and detoxification effect. Patterns of toxicity interaction variations with DBPs concentrations were identified to detect possible synergistic cytotoxicity interactions under various combinations of HAMs and HANs in the presence of the cysteine thiol. Results could benefit future N-DBPs control efforts.
Subject(s)
Disinfection , Water Pollutants, Chemical , Water Pollutants, Chemical/toxicity , Water Pollutants, Chemical/chemistry , Animals , Disinfectants/toxicity , Disinfectants/chemistry , Biomimetics , Cell Survival/drug effects , Water Purification/methods , Acetamides/toxicity , Acetamides/chemistry , Cysteine/chemistry , Sulfhydryl Compounds/chemistry , HalogenationABSTRACT
Ultrafiltration (UF) is widely used in drinking water plants; however, membrane fouling is unavoidable. Natural organic matter (NOM) is commonly considered as an important pollutant that causes membrane fouling. Herein, we proposed VUV/H2O2 as a UF pretreatment and used UV/H2O2 for comparison. Compared to UV/H2O2, the VUV/H2O2 system presented superior NOM removal. In the VUV/H2O2 system, the steady-state concentration of HO⢠was approximately twice that in the UV/H2O2 system, which was ascribed to the promoting effect of the 185 nm photons. Specifically, 185 nm photons promoted HO⢠generation by decomposing mainly H2O at a low H2O2 dose or by decomposing mainly H2O2 at a high H2O2 dose. The VUV/H2O2 pretreatment also demonstrated better membrane fouling mitigation performance than did UV/H2O2. An increase in the H2O2 dose promoted HO⢠generation, thereby enhancing the performance of NOM degradation and membrane fouling alleviation and shifting the major membrane fouling mechanism from cake filtration to standard blocking. The VUV/H2O2 (0.60 mM) pretreatment effectively reduced disinfection byproducts (DBPs) formation during chlorine disinfection. Additionally, the oxidant H2O2 affected the membrane surface morphology and performance but had no evident effect on the mechanical properties. In actual water treatment, the VUV/H2O2 pretreatment exhibited better performance than the UV/H2O2 pretreatment in easing membrane fouling, ameliorating water quality, and reducing DBPs formation and acute toxicity.
Subject(s)
Disinfection , Hydrogen Peroxide , Ultrafiltration , Ultraviolet Rays , Water Purification , Hydrogen Peroxide/chemistry , Water Purification/methods , Disinfection/methods , Membranes, Artificial , Water Pollutants, Chemical/toxicity , Water Pollutants, Chemical/chemistry , Disinfectants/toxicity , Disinfectants/chemistry , Chlorine/chemistry , Chlorine/toxicity , Aliivibrio fischeri/drug effectsABSTRACT
Biodegradable plastics (BPs) have seen a continuous increase in annual production and application due to their environmentally sustainable characteristics. However, research on the formation of disinfection byproducts (DBPs) from biodegradable microplastics (BMPs) during chlorination is limited, and the effects of aqueous solution chemistry on this process have yet to be explored. Therefore, two biodegradable microplastics, polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT), were investigated in this study to examine the changes in their physicochemical properties before and after chlorination, and the formation of DBPs under different environmental conditions. The results showed that PLA was more chlorine-responsive, and generated more DBPs. The pH converted some of the intermediates into more stable DBPs by affecting the concentration of HClO and base-catalyzed reactions, whereas ionic strength slightly reduced DBP concentration by ion adsorption and promoting the aggregation of BMPs. Finally, since PLA has a slightly greater volume of mesopores and micropores compared to PBAT, it may more effectively adsorb DBP precursors beyond natural organic matter (NOM), such as some anthropogenic pollutants, thus potentially decreasing the formation of chlorinated DBPs in surface water. This research explored the potentiality for DBP formation by BMPs under different water quality conditions during the disinfection process, which is useful for assessing the environmental hazards of BMPs.
Subject(s)
Biodegradable Plastics , Disinfection , Halogenation , Polyesters , Water Pollutants, Chemical , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/analysis , Polyesters/chemistry , Biodegradable Plastics/chemistry , Water Purification/methods , Disinfectants/chemistry , Microplastics/chemistry , AdsorptionABSTRACT
Chloroxylenol is a worldwide commonly used disinfectant. The massive consumption and relatively high chemical stability of chloroxylenol have caused eco-toxicological threats in receiving waters. We noticed that chloroxylenol has a chemical structure similar to numerous halo-phenolic disinfection byproducts. Solar detoxification of some halo-phenolic disinfection byproducts intrigued us to select a rapidly degradable chloroxylenol alternative from them. In investigating antimicrobial activities of disinfection byproducts, we found that 2,6-dichlorobenzoquinone was 9.0-22 times more efficient than chloroxylenol in inactivating the tested bacteria, fungi and viruses. Also, the developmental toxicity of 2,6-dichlorobenzoquinone to marine polychaete embryos decreased rapidly due to its rapid degradation via hydrolysis in receiving seawater, even without sunlight. Our work shows that 2,6-dichlorobenzoquinone is a promising disinfectant that well addresses human biosecurity and environmental sustainability. More importantly, our work may enlighten scientists to exploit the slightly alkaline nature of seawater and develop other industrial products that can degrade rapidly via hydrolysis in seawater.
Subject(s)
Disinfectants , Disinfection , Seawater , Disinfectants/chemistry , Disinfectants/pharmacology , Disinfection/methods , Seawater/chemistry , Animals , Hydrolysis , Polychaeta/drug effects , Fungi/drug effects , Bacteria/drug effects , Chlorophenols/chemistry , Viruses/drug effects , Humans , XylenesABSTRACT
When a hypochlorite solution is ultrasonically fogged in a room, free chlorine, i.e., HOCl and OCl-, reaches various positions in two forms: fine fog droplets and gaseous hypochlorous acidï¼HOCl(g)ï¼. In this study, the cumulative amount of free chlorine reaching various positions on the floor away from the fogger was measured in a 90-m3 room, using a sulfamate-carrying glass-fiber filter indicator. The fine droplets were blown out from the fogger into the spaces at different discharge port angles of 30 - 90°. Free chlorine was successfully trapped by sulfamate, forming monochlorosulfamate, which was stably retained on the indicator. The cumulative amount of free chlorineï¼ ng/indicatorï¼ increased with fogging time at each position and depended on the blow angle and distance from the fogger. Minor differences in the HOCl(g) concentration near the floor at all positions were observed. The disinfection efficacy of the fogging treatment against Staphylococcus aureus on wet surfaces was relatively higher at positions near the fogger and lower at positions far from the fogger. At each discharge port angle, a strong correlation between the logarithmic reduction in relative viable cells and the cumulative amount of free chlorine reaching S. aureus plates was observed. The slopes of the regression lines of correlation diagrams as a function of the cumulative amount of free chlorine were between -0.0362 and -0.0413 ng-1. This study demonstrated that the cumulative amount of free chlorine measured using the filter indicator could reflect the sum of the free chlorine of both fine droplets and HOCl(g), and that the disinfection efficiency depended on the cumulative amount of free chlorine reaching different areas.
Subject(s)
Chlorine , Disinfectants , Disinfection , Hypochlorous Acid , Staphylococcus aureus , Chlorine/pharmacology , Chlorine/chemistry , Disinfection/methods , Staphylococcus aureus/drug effects , Staphylococcus aureus/growth & development , Hypochlorous Acid/pharmacology , Hypochlorous Acid/chemistry , Disinfectants/pharmacology , Disinfectants/chemistry , UltrasonicsABSTRACT
Viral pathogens pose a substantial threat to public health and necessitate the development of effective remediation and antiviral strategies. This short communication aimed to investigate the antiviral efficacy of disinfectants on the surface proteins of human pathogenic viruses. Using in silico modeling, the ligand-binding energies (LBEs) of selected disinfectants were predicted and combined with their environmental impacts and costs through an eco-pharmaco-economic analysis (EPEA). The results revealed that the binding affinities of chemical disinfectants to viral proteins varied significantly (p < 0.005). Rutin demonstrated promising broad-spectrum antiviral efficacy with an LBE of -8.49 ± 0.92 kcal/mol across all tested proteins. Additionally, rutin showed a superior eco-pharmaco-economic profile compared to the other chemicals, effectively balancing high antiviral effectiveness, moderate environmental impact, and affordability. These findings highlight rutin as a key phytochemical for use in remediating viral contaminants.