Minimum four-year clinical outcomes after on-table reconstruction technique for Dubberley type III in coronal shear fractures of the capitellum and trochlea: a report of 10 patients.

PURPOSE: Comminuted coronal shear fractures of the distal humerus represent rare injuries and are difficult to treat, especially comminuted capitellum and trochlear fractures (Dubberley Type III). The on-table reconstruction technique of comminuted articular fractures may be an option, although it has not been reported in the coronal shear fracture of the distal humerus. The aim of the present case series is to determine the functional and radiological outcomes of on-table reconstructed Dubberley III fractures. METHODS: A retrospective review was conducted of 10 patients with Dubberley type III fractures in coronal shear fractures of the capitellum and trochlea who underwent an 'on-table' reconstruction technique between January 2009 and October 2019. All patients were evaluated using the disabilities of the arm, shoulder, and hand (DASH) score, American Shoulder and Elbow Surgeons(ASES) score, Mayo Elbow Score Performance Index (MEPI) score and at least 4 years later. RESULTS: All cases achieved union. At the final follow-up, the mean range of elbow motion was 11.5°of flexion contracture and 131.9° of further flexion. The mean DASH score was 21.2 (5.7) points (range 13.3-32.5). The mean ASES score was 88.6 ± 7.4 (range, 77 to 100). The mean MEPI score was 87 (10) points (range 70-100). In complication, partial osteonecrosis of capitellum is developed in one patient. One patient had heterotopic ossification without functional impairment. CONCLUSION: The on-table reconstruction technique can be a reliable option in the surgical treatment of complex distal humerus fractures. This technique allows anatomical reduction of comminuted capitellum and trochlea, with a low risk of avascular necrosis over 4 years of follow-up. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Mid- to long-term outcomes of proximal humerus fractures treated with open reduction, plate fixation, and iliac bone autograft augmentation.

BACKGROUND: Open reduction and internal fixation (ORIF) using locking plates is a widely adopted treatment for displaced proximal humerus fractures. Various augmentation techniques have been developed to enhance the stability of plate fixation. Among these, iliac bone autograft is notable for its advantages over allografts, such as ready availability and the elimination of costs and risks associated with disease transmission. Despite its potential benefits, data on the outcomes of iliac bone autograft augmentation (IBAA) are still limited. This study aims to present the mid- to long-term results of treating proximal humerus fractures with ORIF using locking plates and IBAA. METHODS: The study included 15 patients treated with ORIF and IBAA. We classified fracture patterns using the Neer classification and estimated local bone density via the deltoid tuberosity index. We measured the neck shaft angle (NSA) and humeral head height (HHH) on both immediate postoperative and most recent X-ray images to assess the maintenance of reduction. Clinical outcomes were evaluated using the DASH (Disabilities of the Arm, Shoulder, and Hand) and Constant scores. RESULTS: The average follow-up duration was 59.56 months, ranging from 24 to 93 months. A majority of fractures were classified as four-part (53%). The average immediate and late postoperative NSAs were 132.6±8.19 and 131.6±7.32 degrees, respectively. The average HHH on the immediate postoperative and latest follow-up images were 16.46±6.07 and 15.10±5.34, respectively. None of the patients exhibited any radiological signs of avascular necrosis or loss of reduction at the latest follow-up. The mean postoperative Constant and DASH scores at the latest follow-up were 79.6 and 11.5, respectively. CONCLUSION: Our findings suggest that ORIF with IBAA is an effective method for managing three- or four-part proximal humerus fractures, yielding excellent outcomes.

Internal Brace Fixation Technique for Lisfranc Injury: A Retrospective Study.

BACKGROUND The Lisfranc ligament is crucial for maintaining the transverse and longitudinal arch of the foot. Owing to the disruption between the medial cuneiform bone and the base of the second metatarsal bone, the currently preferred fixation method remains controversial. Our fixation technique involves screwing one anchor to the medial and intermediate cuneiform bones and using the anchor to carry the ligament to bind the Lisfranc joint and first and second metatarsal joints altogether for elastic fixation. This study evaluated the clinical and functional outcomes of InternalBrace fixation for Lisfranc injury. MATERIAL AND METHODS This retrospective study included 58 patients who underwent InternalBrace fixation for Lisfranc injury between January 2019 and September 2022 by an experienced surgeon. One-way analysis of variance or t test was used. Preoperative classification was performed according to the Myerson classification with imaging data. Postoperative follow-up was performed based on intraoperative blood loss, fracture healing time, visual analog scale (VAS) score, the American Orthopedic Foot and Ankle Society (AOFAS) score, Tegner score, and complications. RESULTS Surgery was completed in all patients, and follow-up was performed. The patients' ages ranged from 19 to 62 years (average: 34.6±9.4 years). The postoperative follow-up time was 12-24 months (average: 16.9±3.0 months). The average time for fracture healing was 12.8±3.0 (10-24) weeks. The VAS, AOFAS, and Tegner scores significantly improved postoperatively (from 5.33±1.0 (3-7) to 1.24±0.57 (0-2); 28.02±6.70 (18-51) to 91.59±4.76 (82-96); and 2.40±0.67 (1-4) to 6.53±0.54 (6-7), respectively), which was statistically significant (P<0.01), and the good rate of AOFAS was 91.4%. The postoperative complications were traumatic arthritis, incision infection, and temporary dorsal foot numbness, which gradually recovered. No other rejection reactions or Lisfranc fracture/dislocations recurrence occurred during the follow-up period. CONCLUSIONS InternalBrace fixation for Lisfranc injury is beneficial for restoring Lisfranc joint stability and function and allows for early and more aggressive rehabilitation for patients, with fewer surgical complications.

Time to surgical management of distal radius fractures: effects on health care utilization and functional outcomes.

BACKGROUND: Distal radius fractures are common injuries. Open reduction and internal fixation with volar locking plates is the most common approach for surgical fixation. This study investigated the association between time to surgery and health care utilization, income, and functional outcomes among patients undergoing open reduction and internal fixation for distal radius fracture. METHODS: We conducted a retrospective review of patients who underwent open reduction and internal fixation for isolated acute distal radius fracture between 2009 and 2019. Time to surgery was grouped as early (≤ 14 d) and delayed (> 14 d). We performed χ2 (or Fisher exact) and Wilcoxon rank sum (or Kruskal-Wallis) tests to provide statistical comparison of time to surgery by health care utilization and functional outcomes. Univariable and multivariable logistic regression analyses were performed to identify factors significantly associated with time to surgery. We included all significant univariables in the multivariable logistic regression model, which identified factors based on significant adjusted odds ratios (95% confidence intervals excluding the null) after we adjusted for confounding variables. RESULTS: We included 106 patients, with 36 (34.0%) in the group receiving early treatment and 70 (66.0%) in the group receiving delayed treatment. Patients in the delayed-treatment group attended significantly more clinic visits and postoperative hand therapy sessions. The group with delayed treatment demonstrated significantly lower degrees of wrist flexion at the first follow-up, but this difference did not persist. Patients with higher estimated income (> $39 405 per annum) had lower odds of delayed surgery than those with lower estimated income (≤ $39 405). CONCLUSION: Delayed time to surgery was associated with greater health care utilization and lower degrees of early wrist flexion. Access to care for lower-income patients warrants further evaluation.

Biomechanical Design Optimization of Distal Humerus Fracture Plates: A Review.

The goal of this article was to review studies on distal humerus fracture plates (DHFPs) to understand the biomechanical influence of systematically changing the plate or screw variables. The problem is that DHFPs are commonly used surgically, although complications can still occur, and it is unclear if implant configurations are always optimized using biomechanical criteria. A systematic search of the PubMed database was conducted to identify English-language biomechanical optimization studies of DHFPs that parametrically altered plate and/or screw variables to analyze their influence on engineering performance. Intraarticular and extraarticular fracture (EAF) data were separated and organized under commonly used biomechanical outcome metrics. The results identified 52 eligible DHFP studies, which evaluated various plate and screw variables. The most common plate variables evaluated were geometry, hole type, number, and position. Fewer studies assessed screw variables, with number and angle being the most common. However, no studies examined nonmetallic materials for plates or screws, which may be of interest in future research. Also, articles used various combinations of biomechanical outcome metrics, such as interfragmentary fracture motion, bone, plate, or screw stress, number of loading cycles to failure, and overall stiffness (Os) or failure strength (Fs). However, no study evaluated the bone stress under the plate to examine bone "stress shielding," which may impact bone health clinically. Surgeons treating intraarticular and extraarticular distal humerus fractures should seriously consider two precontoured, long, thick, locked, and parallel plates that are secured by long, thick, and plate-to-plate screws that are located at staggered levels along the proximal parts of the plates, as well as an extra transfracture plate screw. Also, research engineers could improve new studies by perusing recommendations in future work (e.g., studying alternative nonmetallic materials or "stress shielding"), clinical ramifications (e.g., benefits of locked plates), and study quality (e.g., experimental validation of computational studies).

Preoperative CT Scan is not Associated with Shorter Surgical Time or Improved Patient Outcomes for Trimalleolar Ankle Fractures.

Background: Posterior malleolar involvement can drastically affect patient outcomes. Literature has supported the use of preoperative Computed Tomography (CT) to assess posterior malleolar fracture morphology. The purpose of this study is to determine whether preoperative CT is associated with significant improvement in surgical time, postoperative complications, reoperation rates in trimalleolar ankle fractures. Surgeons were also asked to complete survey regarding use of CT scans to gauge utility preoperatively. Methods: Adult patients with trimalleolar ankle fractures who underwent operative fixation between 2018-2020 were retrospectively reviewed. Primary outcomes included surgical time, postoperative complications, and reoperations. Secondary outcome was presence of posterior malleolar fixation. 15 surgeons who performed ankle ORIF were surveyed to gain information regarding why or why not preoperative CT scan was obtained. Results: 288 patients with trimalleolar ankle fractures were included, 94 had preoperative CT scans (32.6%). No significant differences found in patient age, gender, BMI, smoking status between the groups that did and did not have preoperative CT scan. No significant differences were observed in AO/OTA classification between groups. Average surgical time was significantly higher in group that received a preoperative CT (114 without CT vs. 145 with CT, p<0.05). Complications (10.3% no CT vs 7.4% with CT, p=0.55) and reoperations (6.7% without CT vs. 7.4% with CT, p=0.16) not significantly different between groups. No significant difference was observed in rate of posterior malleolus fixation between groups (43.8% without CT vs 39.4% with CT; p=0.52). Of surveyed surgeons, 87% reported they don't routinely obtain preoperative CT scan for trimalleolar ankle fractures. Most common reasons for preoperative scans were deciding on approach/positioning, assessing for impaction, determining the size of the posterior malleolus. Conclusion: Although preoperative CT scans are obtained in one third of patients with operative trimalleolar ankle fractures, we did not find an improvement in surgical time, complications, and reoperation. Level of Evidence: III.

Posterior Cruciate Ligament Injuries in Very Young Children - A Case Report and Modern Review.

Background: Posterior cruciate ligament (PCL) tears in young children are rare and optimal treatment is poorly described. Diagnosis may prove challenging as young children may not be able to verbalize a complete history of injury, may be difficult to examine, and plane film radiographs often appear within normal limits. Surgical treatment carries a risk of physeal arrest, but non-operative treatment may lead to recurrent instability and pain. Methods: We present a case report of a fouryear- old child with a PCL avulsion off the femoral insertion who received an open reduction and internal fixation (ORIF) with combined arthroscopic synovial debridement. We performed a literature review which compared the mechanism, location, concomitant injuries, work up and management of PCL injuries in children under the age of ten compared to adolescents and adults. Results: Nineteen months following surgery, physical examination revealed full knee range of motion and return to baseline function. Imaging studies confirmed there was no evidence of physeal arrest. Conclusion: ORIF with arthroscopy can be an effective method to treat PCL avulsions in children under the age of 10 years. This is similar to other case reports which reported positive outcomes with ORIF in this population. Large studies are needed to best understand optimal treatment modalities for PCL injuries in very young children. Level of Evidence: IV.

Characteristics, Treatment, and Prognosis of Pediatric Symphyseal/Parasymphyseal-Condylar Fractures.

BACKGROUND: Pediatric condylar fractures combined with symphyseal or parasymphyseal fractures are common but challenging to manage. The authors present fracture characteristics, propose a treatment algorithm, and evaluate the treatment prognosis of pediatric symphyseal/parasymphyseal-condylar fractures. METHODS: A retrospective review was conducted on pediatric patients who underwent treatment for symphyseal/parasymphyseal-condylar fractures in a trauma center between January of 2006 and January of 2021. Demographic and fracture characteristics were recorded. Complications and functional evaluations, including maximum interincisal opening, Helkimo anamnestic index, and clinical dysfunction index, were assessed after at least 1 year of follow-up. RESULTS: After screening, 104 participants met the inclusion criteria. Among them, 50.96% received open reduction and internal fixation for symphyseal/parasymphyseal fractures and closed treatment for condylar fractures, 45.19% were treated by liquid diet and functional exercise, and the remaining 3.85% with severe malocclusion were treated with the assistance of orthodontic appliances. During follow-up, the average maximum interincisal opening of the patients increased from 17 ± 6.29 mm to 41.64 ± 6.33 mm. No subjective symptoms were observed in 86.54% of the patients and 79.81% showed no or mild clinical symptoms. Except for 1 patient who developed temporomandibular joint ankylosis, no other severe complication was reported. Postfracture remodeling of the nonfractured condyle was noted in 3 cases. CONCLUSIONS: Pediatric symphyseal/parasymphyseal-condylar fractures present unique biomechanical and anatomic challenges that require special consideration during management. In this study, satisfactory functional prognosis was achieved following implementation of the treatment algorithm. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Surgical fixation of traumatic sternal manubrium dislocation and right-sided rib fractures following a motorcycle accident.

This brief report discusses the diagnosis, management and surgical intervention of a man in his 30s presenting with a rare traumatic sternal manubrium dislocation following a motorcycle crash, accompanied by multiple concomitant rib fractures. The severity and complexity of the patient's injuries necessitated an operative approach for his sternomanubrial dislocation, emphasising the importance of multidisciplinary coordination, accurate diagnosis and prompt surgical intervention. The report provides valuable insights into the successful application of open reduction and internal fixation with plating in a real-world setting, which resulted in positive patient outcomes, despite the rarity and severity of this type of trauma. It further underscores the need for additional research to advance best practices for managing traumatic sternal manubrium dislocations in the context of high-impact injuries.

[Structural design and evaluation of bone remodeling effect of fracture internal fixation implants with time-varying stiffness].

The stiffness of an ideal fracture internal fixation implant should have a time-varying performance, so that the fracture can generate reasonable mechanical stimulation at different healing stages, and biodegradable materials meet this performance. A topology optimization design method for composite structures of fracture internal fixation implants with time-varying stiffness is proposed, considering the time-dependent degradation process of materials. Using relative density and degradation residual rate to describe the distribution and degradation state of two materials with different degradation rates and elastic modulus, a coupled mathematical model of degradation simulation mechanical analysis was established. Biomaterial composite structures were designed based on variable density method to exhibit time-varying stiffness characteristics. Taking the bone plate used for the treatment of tibial fractures as an example, a composite structure bone plate with time-varying stiffness characteristics was designed using the proposed method. The optimization results showed that material 1 with high stiffness formed a columnar support structure, while material 2 with low stiffness was distributed at the degradation boundary and inside. Using a bone remodeling simulation model, the optimized bone plates were evaluated. After 11 months of remodeling, the average elastic modulus of callus using degradable time-varying stiffness plates, titanium alloy plates, and stainless steel plates were 8 634 MPa, 8 521 MPa, and 8 412 MPa, respectively, indicating that the use of degradable time-varying stiffness plates would result in better remodeling effects on the callus.

Biomechanical Comparison of Fixation Methods for Posterior Wall Fractures of the Acetabulum: Conventional Reconstruction Plate vs. Spring Plate vs. Variable Angle Locking Compression Plate.

Background and Objectives: Acetabular fractures, though infrequent, present considerable challenges in treatment due to their association with high-energy trauma and poor prognoses. Posterior wall fractures, the most common type among them, typically have a more favorable prognosis compared to other types. Anatomical reduction and stable fixation of the posterior wall are crucial for optimal treatment outcomes. This study aimed to biomechanically compare three commonly used fixation methods for posterior wall fractures of the acetabulum-a conventional reconstruction plate, a spring plate, and a 2.7 mm variable angle locking compression plate (VA-LCP). Materials and Methods: The study utilized 6 fresh-frozen cadavers, yielding 12 hemipelvises free from prior trauma or surgery. Three fixation methods were compared using a simple acetabulum posterior wall fracture model. Fixation was performed by an orthopedic specialist, with prebending of plates to minimize errors. Hemipelvises were subjected to quasi-static and cyclic loading tests, measuring fracture gap, stiffness, and displacement under load. Results: It showed no significant differences in fracture gap among the three fixation methods under cyclic loading conditions simulating walking. However, the conventional reconstruction plate exhibited a greater stiffness compared to the spring and variable angle plates. Fatigue analysis revealed no significant differences among the plates, indicating a similar stability throughout cyclic loading. Despite differences in stiffness, all three fixation methods demonstrated adequate stability under loading conditions. Conclusions: While the conventional reconstruction plate demonstrated a superior stiffness, all three fixation methods provided sufficient stability under cyclic loading conditions similar to walking. This suggests that postoperative limitations are unlikely with any of the three methods, provided excessive activities are avoided. Furthermore, the variable angle plate-like the spring plate-offers an appropriate stability for fragment-specific fixation, supporting its use in surgical applications. These findings contribute to understanding the biomechanical performance of different fixation methods for acetabular fractures, facilitating improved surgical outcomes in challenging cases.

[A clinical study of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for acetabular fractures].

Objective: To investigate the effectiveness of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for treatment of acetabular fractures. Methods: The clinical data of 23 patients with acetabular fractures treated with open reduction and internal fixation and infra-acetabular screw placement in two medical centers between June 2022 and October 2023 were retrospectively analyzed. According to the the method of infra-acetabular screw placement, the patients were divided into navigation group (10 cases, using HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement) and freehand group (13 cases, using traditional X-ray fluoroscopy to guide screw placement). There was no significant difference in gender, age, body mass index, cause of injury, time from injury to operation, and Judet-Letournel classification between the two groups ( P>0.05). The time of infra-acetabular screw placement, the fluoroscopy frequency, the guide pin adjustment times, the quality of screw placement, the quality of fracture reduction, and the function of hip joint were compared between the two groups. Results: All patients completed the operation successfully. The time of screw placement, the fluoroscopy frequency, and guide pin adjustment times in the navigation group were significantly less than those in the freehand group ( P<0.05). The quality of screw placement in the navigation group was significantly better than that in the freehand group ( P<0.05). Patients in both groups were followed up 6-11 months, with an average of 7.7 months. There were 9 and 9 cases in the navigation group and the freehand group who achieved excellent and good fracture reduction quality at 1 week after operation, and 12 and 12 cases with excellent and good hip joint function at last follow-up, respectively, and there was no significant difference between the two groups ( P>0.05). The fractures in both groups healed well, and there was no significant difference in healing time ( P>0.05). During the follow-up, there was no complication related to screw placement, such as failure of internal fixation, vascular and nerve injury, incisional hernia. Conclusion: In the treatment of acetabular fractures, compared with the traditional freehand screw placement, the HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement can reduce the time of screw placement, improve the accuracy of screw placement, and reduce the amount of radiation, which is an efficient, accurate, and safe surgical method.

[Comparison of effectiveness of long and short proximal femoral nail anti-rotation in treatment of type A2.3 intertrochanteric fracture of femur].

Objective: To compare the effectiveness of long and short proximal femoral nail anti-rotation (PFNA) in the treatment of type A2.3 intertrochanteric fracture of femur (IFF). Methods: The clinical data of 54 patients with type A2.3 IFF admitted between January 2020 and December 2022 were retrospectively analyzed. According to the length of PFNA nail used in the operation, they were divided into long nail group (PFNA nail length>240 mm, 24 cases) and short nail group (PFNA nail length≤240 mm, 30 cases). There was no significant difference in baseline data such as gender, age, fracture side, body mass index, and time from fracture to operation between the two groups ( P>0.05). The operation time, intraoperative blood loss, intraoperative fluoroscopy frequency, intraoperative reduction quality score, fracture healing, and complications of the two groups were recorded and compared. Harris score was used to evaluate the hip function of patients at 1 year after operation. According to the relationship between the fracture line of type A2.3 IFF and the lesser trochanter, the two groups of patients were divided into type Ⅰ(the fracture line extends to the level of the lesser trochanter), type Ⅱ(the fracture line extends to less than 2 cm below the lesser trochanter), and type Ⅲ (the fracture line extends to more than 2 cm below the lesser trochanter), and the postoperative stability and internal fixator loosening of each subtype were evaluated. Results: The operation time, intraoperative blood loss, and intraoperative fluoroscopy frequency in short nail group were significantly less than those in long nail group ( P<0.05). There was no significant difference in the intraoperative reduction quality score between the two groups ( P>0.05). Patients in both groups were followed up 12-18 months, with an average of 13.5 months. The postoperative stability score of short nail group was significantly lower than that of long nail group ( P<0.05). The Harris score in the long nail group was significantly higher than that in the short nail group at 1 year after operation ( P<0.05), but there was no significant difference in Harris score grading between the two groups ( P>0.05). Complications occurred in 3 cases of the long nail group (including 1 case of coxa varus caused by external nail entry point and 2 cases of loose internal fixator), and 7 cases of the short nail group (including 1 case of coxa varus caused by external nail entry point and 6 cases of loose internal fixator). Neither group had any anterior femoral arch damage, there was no significant difference in the incidence of complications between the two groups ( P>0.05). The number of type Ⅲ patients was relatively small and not included in the statistics; there was no significant difference in the postoperative stability score and the incidence of internal fixator loosening between the long and short nail groups in type Ⅰ patients ( P>0.05). In type Ⅱ patients, the postoperative stability score and the incidence of internal fixation loosening in the long nail group were significantly better than those in the short nail group ( P<0.05). Conclusion: Long PFNA fixation for type A2.3 IFF has longer operation time and more intraoperative blood loss, but the overall stability of fracture is better after operation. For type A2.3 IFF with fracture line extending to less than 2 cm below the lesser trochanter, long PFNA is used for fixation, although the surgical trauma is large, but the postoperative stability is better than that of short PFNA; for type A2.3 IFF with fracture line extending to the lesser trochanter, there is no significant difference in postoperative stability between long and short PFNAs.

[Morphological characteristics and reduction techniques of sagittal beak-like deformity of head-neck fragment in femoral intertrochanteric fractures].

Objective: To summarize the morphological characteristics of sagittal beak-like deformity of head-neck fragment in femoral intertrochanteric fractures and to investigate the technical skills in fracture reduction. Methods: A clinical data of 31 patients with femoral intertrochanteric fractures between May 2021 and April 2023 was retrospectively analyzed. The fractures had sagittal beak-like deformity of head-neck fragment in all patients. There were 13 males and 18 females, with an average age of 76.2 years (range, 68-83 years). The time from injury to operation was 36-76 hours (mean, 51.2 hours). Fractures were classified as type A1.2 in 10 cases, type A1.3 in 11 cases, type A2.2 in 6 cases, and type A2.3 in 4 cases according to the AO/Orthopaedic Trauma Association (AO/OTA)-2018 classification; and as type A1.3 in 10 cases, type A2.1 in 11 cases, type A2.2 in 6 cases, type A2.3 in 2 cases, and type A2.4 in 2 cases according to a novel comprehensive classification for femoral intertrochanteric fractures proposed by the "Elderly Hip Fracture" Research Group of the Reparative and Reconstructive Surgery Committee of the Chinese Rehabilitation Medical Association. Based on preoperative X-ray films, CT scan and three-dimensional reconstruction, the fractures were classified into two types: type 1 (14 cases), with uncomplicated fracture morphology, severe bone interlocking and (or) soft tissue incarceration; type 2 (17 cases), with severe fracture crushing, obvious dissociation between bone blocks, and severe soft tissue hinge destruction. After the failure of the closed reduction, all patients underwent fracture reduction assisted with instrument via anterior minimal incision and proximal femoral nail antirotation nails internal fixation. The operation time, intraoperative fluoroscopy, intraoperative visible blood loss, length of hospital stay, and incidence of complications were recorded. The fracture reduction quality and stability score were assessed at immediate after operation under fluoroscopy. The fracture healing was evaluated and healing time was recorded by X-ray films. The pain visual analogue scale (VAS) score was performed at 48 hours after operation and Parker-Palmer activity score at 3 months after operation for function evaluation. Results: The operation time was 39-58 minutes (mean, 46.3 minutes); fluoroscopy was performed 13-38 times (mean, 23.5 times) during operation; the intraoperative visible blood loss was 45-90 mL (mean, 65.3 mL). The fracture reduction quality and stability score were rated as good in 29 cases and acceptable in 2 cases. The pain VAS score was 2-6 (mean, 3.1) at 48 hours after operation. Eleven patients developed deep vein thrombosis of the lower limbs after operation. Patients were hospitalized for 6-10 days (mean, 7.3 days). All patients were followed up 5-8 months (mean, 6.5 months). All fractures healed at 3.5-8.0 months after operation (mean, 4.5 months). Parker-Palmer activity score at 3 months after operation was 9 in 28 cases and 6 in 3 cases. Conclusion: The femoral intertrochanteric fracture with sagittal beak-like deformity of head-neck fragment is difficult to manually reduce. The pin combined with cannulated screw insertion to the neck cortex can hold the fragment and assist fracture reduction, which is a simple and effective technique.

[Application of Allgöwer-Donati suture in internal fixation of Schatzker type â ¤and â ¥ tibial plateau closed fractures].

Objective: To investigate the effectiveness of Allgöwer-Donati suture in open reduction and internal fixation of Schatzker type Ⅴ and Ⅵ tibial plateau closed fractures. Methods: A clinical data of 60 patients with Schatzker type type Ⅴ and Ⅵ tibial plateau closed fractures, who met the selection criteria and admitted between May 2022 and May 2023, was retrospectively analyzed. After open reduction and internal fixation via double incisions, the incisions were closed with conventional mattress suture in 30 cases (control group) and Allgöwer-Donati suture in 30 cases (observation group). There was no significant difference in gender, age, fracture side and type, time from injury to operation, body mass index, and other baseline data between the two groups ( P>0.05). The incidence of incision-related complications after operation, visual analogue scale (VAS) score of incision at 3 days and 1 and 2 weeks after operation, and the short-form 36 health survey scale (SF-36) [physical functioning (PF), role physical (RP), bodily pain (BP), and general health (GH)] at 12 weeks after operation were compared between the two groups. Results: All operations of the two groups successfully completed. All patients were followed up 6-14 months (mean, 12 months). Incision fluid leakage occurred in 1 case of observation group and 7 cases of control group within 1 week after operation, and the incisions healed after symptomatic treatment. The incisions of other patients healed by first intention. The incidence of early incision complications in observation group was significantly lower than that in control group ( P<0.05). No late incision complications was found in the two groups. There was no significant difference in VAS scores at each time point between the two groups ( P>0.05). The VAS score significantly decreased with the increase of time in the two groups, showing significant differences between the different time points ( P<0.05). There was no significant difference in SF-36 scores (PF, RP, BP, and GH) between the two groups at 12 weeks after operation ( P>0.05). Conclusion: Compared with conventional mattress suture, Allgöwer-Donati suture is effective in open reduction and internal fixation via double incisions for Schatzker type Ⅴand Ⅵ tibial plateau closed fractures, which can reduce the incidence of early incision complications.

Fragment size of lateral Hoffa fractures determines screw fixation trajectory: a human cadaveric cohort study.

BACKGROUND AND PURPOSE: Recommendations regarding fragment-size-dependent screw fixation trajectory for coronal plane fractures of the posterior femoral condyles (Hoffa fractures) are lacking. The aim of this study was to compare the biomechanical properties of anteroposterior (AP) and crossed posteroanterior (PA) screw fixations across differently sized Hoffa fractures on human cadaveric femora. PATIENTS AND METHODS: 4 different sizes of lateral Hoffa fractures (n = 12 x 4) were created in 48 distal human femora according to the Letenneur classification: (i) type I, (ii) type IIa, (ii) type IIb, and (iv) type IIc. Based on bone mineral density (BMD), specimens were assigned to the 4 fracture clusters and each cluster was further assigned to fixation with either AP (n = 6) or crossed PA screws (n = 6) to ensure homogeneity of BMD values and comparability between the different test conditions. All specimens were biomechanically tested under progressively increasing cyclic loading until failure, capturing the interfragmentary movements via motion tracking. RESULTS: For Letenneur type I fractures, kilocycles to failure (mean difference [∆] 2.1, 95% confidence interval [CI] -1.3 to 5.5), failure load (∆ 105 N, CI -83 to 293), axial displacement (∆ 0.3 mm, CI -0.8 to 1.3), and fragment rotation (∆ 0.5°, CI -3.2 to 2.1) over 5.0 kilocycles did not differ significantly between the 2 screw trajectories. For each separate subtype of Letenneur type II fractures, fixation with crossed PA screws resulted in significantly higher kilocycles to failure (∆ 6.7, CI 3.3-10.1 to ∆ 8.9, CI 5.5-12.3) and failure load (∆ 275 N, CI 87-463 to ∆ 438, CI 250-626), as well as, less axial displacement from 3.0 kilocycles onwards (∆ 0.4°, CI 0.03-0.7 to ∆ 0.5°, CI 0.01-0.9) compared with AP screw fixation. CONCLUSION: Irrespective of the size of Letenneur type II fractures, crossed PA screw fixation provided greater biomechanical stability than AP-configured screws, whereas both screw fixation techniques demonstrated comparable biomechanical competence for Letenneur type I fractures. Fragment-size-dependent treatment strategies might be helpful to determine not only the screw configuration but also the surgical approach.

Risk of internal fixation treatment in intertrochanteric fracture based on different lateral femoral wall thickness: finite element analysis.

OBJECTIVE: The thickness of the lateral femoral wall, which is an important indicator for evaluating the stability and integrity of intertrochanteric fractures, has been widely studied in recent years. However, as a typical representative of internal fixation treatment, there are few reports on the biomechanical comparison between PFNA and DHS + CS. This study focused primarily on the biomechanical effects of different lateral femoral wall thicknesses on two types of internal fixation through finite element analysis. METHODS: We randomly recruited a healthy adult and collected his femoral CT data to establish a model of femoral intertrochanteric fracture with different lateral femoral wall thicknesses. Following PFNA and DHS + CS fixation, femoral models were simulated, and variations in stress and displacement of the internal fixation and femoral head were recorded under the same physiological load. RESULTS: First, finite element mechanical analysis revealed that the stress and displacement of the internal fixation and femoral head were lower in the femoral model after PFNA fixation than in the DHS + CS model. Second, as the outer wall thickness decreased, the stress and deformation endured by both types of internal fixation gradually increased. CONCLUSIONS: Finite element analysis determined that PFNA exhibits significantly better biomechanical stability than DHS + CS when subjected to varying lateral femoral wall thicknesses. Moreover, lateral femoral wall thickness substantially affects the stability of the two internal fixation biomechanical environments. When the thickness of the lateral femoral wall is too small, we do not recommend using extramedullary fixation because there is a significant risk of internal fixation fracture.

Intraoperative assessment of the dorso-ulnar fragment stability with stress fluoroscopy: An observational study.

This study aims to investigate the effectiveness of intraoperative stress radiographs in evaluating the stability and fixation adequacy of the dorso-ulnar fragment (DUF) after volar plate application. Sixty-four patients who underwent open reduction and internal fixation due to comminuted distal radius fracture accompanied by DUF between May 2020 and February 2022 were reviewed retrospectively. Two groups were compared, with and without stress radiographs used in addition to routine fluoroscopic imaging during the surgical treatment of distal radius fractures. DUF sizes and fracture classifications were made according to preoperative computed tomography. Displacement of the DUF, dorsal cortex screw penetration, and the number of screws inserted into the DUF were evaluated on immediate postoperative CT scans and direct radiographs. DUF displacement at the patients' last follow-up was significantly higher in the control group (1.62 mm) than in the additional stress fluoroscopy applied group (0.53 mm). It was observed that the amount of displacement increased as the dorso-volar size of the DUF decreased. No significant difference was observed in dorsal cortex screw penetrations between the 2 groups. In the additional stress fluoroscopy applied group, stabilization rates with at least 1 screw over volar-locking plate for DUF were significantly higher (P < .001). Compared to the stress fluoroscopy group, the change in ulnar variance (P < .001) and volar tilt (P < .001) was significantly higher in the control group in the last follow-up radiography. No significant difference was observed between the implant removal rates of both groups. Evaluation of the stability of the DUF with stress radiographs after fixation is an effective method to reveal the need for additional fixation. Dorsal stress radiographs allow dynamic evaluation of fixation strength.

Surgical outcomes of robotic-assisted percutaneous fixation for thoracolumbar fractures in patients with ankylosing spondylitis.

BACKGROUND: Spinal fractures in patients with ankylosing spondylitis (AS) mainly present as instability, involving all three columns of the spine, and surgical intervention is often considered necessary. However, in AS patients, the significant alterations in bony structure and anatomy result in a lack of identifiable landmarks, which increases the difficulty of pedicle screw implantation. Therefore, we present the clinical outcomes of robotic-assisted percutaneous fixation for thoracolumbar fractures in patients with AS. METHODS: A retrospective review was conducted on a series of 12 patients diagnosed with AS. All patients sustained thoracolumbar fractures between October 2018 and October 2022 and underwent posterior robotic-assisted percutaneous fixation procedures. Outcomes of interest included operative time, intra-operative blood loss, complications, duration of hospital stay and fracture union. The clinical outcomes were assessed using the visual analogue scale (VAS) and Oswestry Disability Index (ODI). To investigate the achieved operative correction, pre- and postoperative radiographs in the lateral plane were analyzed by measuring the Cobb angle. RESULTS: The 12 patients had a mean age of 62.8 ± 13.0 years and a mean follow-up duration of 32.7 ± 18.9 months. Mean hospital stay duration was 15 ± 8.0 days. The mean operative time was 119.6 ± 32.2 min, and the median blood loss was 50 (50, 250) ml. The VAS value improved from 6.8 ± 0.9 preoperatively to 1.3 ± 1.0 at the final follow-up (P < 0.05). The ODI value improved from 83.6 ± 6.1% preoperatively to 11.8 ± 6.6% at the latest follow-up (P < 0.05). The average Cobb angle changed from 15.2 ± 11.0 pre-operatively to 8.3 ± 7.1 at final follow-up (P < 0.05). Bone healing was consistently achieved, with an average healing time of 6 (5.3, 7.0) months. Of the 108 screws implanted, 2 (1.9%) were improperly positioned. One patient experienced delayed nerve injury after the operation, but the nerve function returned to normal upon discharge. CONCLUSION: Posterior robotic-assisted percutaneous internal fixation can be used as an ideal surgical treatment for thoracolumbar fractures in AS patients. However, while robot-assisted pedicle screw placement can enhance the accuracy of pedicle screw insertion, it should not be relied upon solely.