Nanostructured ZnO thin film to enhance gutta-percha's adhesion to endodontic sealers.

BACKGROUND: Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkable features due to their considerable bond strength, good optical quality, and excellent piezoelectric, antibacterial, and antifungal properties, offering many potential applications in various fields. This study aimed to explore the influence of GP surface's functionalization with a nanostructured ZnO thin film on its adhesiveness to endodontic sealers. METHODS: Conventional GP samples were divided randomly into three groups: (a) Untreated GP (control); (b) GP treated with argon plasma (PT); (c) Functionalized GP (PT followed by ZnO thin film deposition). GP's surface functionalization encompassed a multi-step process. First, a low-pressure argon PT was applied to modify the GP surface, followed by a ZnO thin film deposition via magnetron sputtering. The surface morphology was assessed using SEM and water contact angle analysis. Further comprehensive testing included tensile bond strength assessment evaluating Endoresin and AH Plus Bioceramic sealers' adhesion to GP. ANOVA procedures were used for data statistical analysis. RESULTS: The ZnO thin film reproduced the underlying surface topography produced by PT. ZnO thin film deposition decreased the water contact angle compared to the control (p < 0.001). Endoresin showed a statistically higher mean bond strength value than AH Plus Bioceramic (p < 0.001). There was a statistically significant difference between the control and the ZnO-functionalized GP (p = 0.006), with the latter presenting the highest mean bond strength value. CONCLUSIONS: The deposition of a nanostructured ZnO thin film on GP surface induced a shift towards hydrophilicity and an increased GP's adhesion to Endoresin and AH Bioceramic sealers.

Quality of different obturation techniques to fill perforating internal root resorption: a micro-computed tomographic study.

BACKGROUND: This study aimed to assess the quality of various obturation techniques to fill perforation caused by internal root resorption using Micro-computed Tomography. METHODS: Cone-beam computed tomography images of a maxillary central incisor tooth with perforating internal resorptive defect were used to create a 3D printed model of the affected tooth. The replicas were divided into four groups based on the obturation technique used. The techniques included Group 1: a polydimethylsiloxane-based sealer (GuttaFlow-2) with gutta-percha. Group 2: same as Group 1 except for using a pre-mixed Bioceramic-based sealer (NeoSEALER Flo). Group 3: the defect was filled entirely using the NeoSealer Flo Bioceramic-based sealer. Group 4: the samples were obturated using the warm vertical compaction technique with a resin-based sealer (ADSeal). The resin models were then scanned a micro-computed scanner to evaluate the percentage of voids in each group. RESULTS: The results showed that NeoSEALER Flo groups had significantly the highest volume of voids while GuttaFlow-2 and warm vertical compaction groups had the lowest void volume. CONCLUSIONS: GuttaFlow-2 and warm vertical compaction techniques performed best in filling the internal resorptive defect.

Micro-CT determination of the porosity of two tricalcium silicate sealers applied using three obturation techniques.

PURPOSE: Using X-ray micro-computed tomography (micro-CT), the aim of this study was to measure the porosity of two tricalcium silicate sealers (EndoSequence BC and NeoSealer Flo) applied using three obturation techniques (single-cone, warm-vertical, and cold-lateral) to six single-rooted human teeth. METHODS: Six extracted, single-rooted human teeth were shaped with ProTaper Next rotary files and obturated with EndoSequence BC or NeoSealer Flo sealers and gutta-percha (GP) using one of the three techniques above. Micro-CT was used to map the full length of the canals. Deep learning cross-sectional segmentation was used to analyze image slices of the apical (0-2 mm) and coronal (14-16 mm from the apex) regions (n = 230-261 per tooth) for the areas of GP and sealer, as well as porosity. Median (%) with interquartile range of porosity were calculated , and the results were statistically analyzed with the Kruskal-Wallis test. RESULTS: In the apical region, EndoSequence BC had significantly fewer pores than NeoSealer Flo with the single-cone obturation (% median-interquartile range, IQR: 0.00-1.62) and warm-vertical condensation (5.57-10.32) techniques, whereas in the coronal region, NeoSealer Flo had significantly fewer pores than EndoSequence BC with these two techniques (0.39-5.02) and (0.10-0.19), respectively. There was no significant difference in porosity between the two sealers for the cold-lateral condensation technique in both the apical and coronal regions. CONCLUSION: For optimal obturation, the choice of technique and sealer is critical.

Micro-CT evaluation of the presence of voids in endodontic obturation.

Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment. AIM: To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique. MATERIALS AND METHODS: Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis. RESULTS: No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds. CONCLUSIONS: The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated.

La presencia de vacíos en la obturación endodóntica, su tamaño y el tipo y localización tiene gran importancia clínica ya que permite evaluar la tridimensionalidad de las técnicas de sellado y relacionarlas con el éxito del tratamiento endodóntico. OBJETIVO: analizar mediante microtomografía la presencia de vacíos en la obturación del conducto radicular de premolares inferiores unirradiculares, utilizando la técnica de cono único y vibración con ultrasonido. MATERIALES Y MÉTODOS: se seleccionaron 20 premolares inferiores unirradiculares a los que se les realizó la preparación quirúrgica y química del conducto radicular. Se realizó la obturación con cono único y biocerámico GRUPO 1- sin vibración. En el GRUPO 2 - con vibración se aplicó vibración por ultrasonido, se tomó del cono de gutapercha colocado en el interior del conducto con pinza de algodón que fue vibrada durante 3 períodos de 3 segundos cada uno. Las mismas fueron adquiridas y reconstruidas en un microtomógrafo para posterior análisis de las imágenes obtenidas. RESULTADOS: No se evidenciaron diferencias significativas entre ambas técnicas de obturación comparadas, pero si entre los tercios analizados, siendo el cervical el que mayor porcentaje de vacíos presenta en comparación a los cortes correspondientes al tercio medio y apical. CONCLUSIONES: Los resultados sugieren que el volumen de vacíos cerrados, abiertos y total no varía en los tratamientos donde se aplica vibración por ultrasonido. En el tercio cervical, el mayor volumen de vacíos se relaciona con la geometría oval que presentaron las piezas dentarias evaluadas en este estudio.

The efficacy of 3 root canal sealers combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease.

To investigate the efficacy of 3 root canal sealants such as AH Plus, GuttaFlow and iRoot SP combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease. This was a single-center retrospective study. 180 patients with dental pulp disease were divided into AH Plus group (n = 60), GuttaFlow group (n = 60) and iRoot SP group (n = 60) according to the different treatment methods. Patients in different groups were treated with corresponding root canal sealant combined with warm gutta-percha vertical compression technique. The quality of root canal filling, filling time, filling area ratio, the incidence of pain after operation, serum interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) and efficacy at 6 months after operation were compared among the 3 groups, respectively. The filling time in the GuttaFlow group and the iRoot SP group was significantly shorter than that in the AH Plus group (P < .001). There were significant differences in pain grade (P = .015) and pain rate (P = .016) among the 3 groups, and the pain rate in the GuttaFlow group and the iRoot SP group was significantly lower than that in the AH Plus group (P = .016). The time-point effect, intergroup effect and time-groups effect of serum TNF-α and IL-6 were significantly different (P < .001), and the levels of the 3 groups after treatment were significantly lower than those before treatment (P < .05), and the levels were significantly lower in the GuttaFlow group and the iRoot SP group (P < .05). There were significant differences in efficacy grading and effective rate among the 3 groups (P = .028), and the effective rate of iRoot SP group was significantly higher than that of AH Plus group (P < .05). The iRoot SP or GuttaFlow as root canal sealant combined with warm gutta-percha vertical compression technique in the treatment of dental pulp disease is better than AH Plus, and the former one can shorten the filling time, relieve the postoperative pain and improve the inflammatory response, but the long-term apical sealing effect of iRoot SP is better than GuttaFlow.

Root canal re-treatment with gutta percha - which techniques influence success?

OBJECTIVE: A systematic review and meta-analysis of the literature was carried out assessing the success rate of root canal retreatment using gutta percha. DATA SOURCES: Four of the largest databases were used to identify existing literature with no date or language restrictions. PubMed, Cochrane, ScienceDirect, Scopus and other additional sources were searched. Grey literature was also reviewed. STUDY SELECTION: Two authors, with Master's degrees in endodontics and with extensive university teaching experience, were selected to screen the databases to identify suitable studies. In case the authors were not able to agree during the study selection process, a third investigator was consulted. Specific inclusion and exclusion criteria were outlined and adhered to in the study selection. Two randomised controlled trials, seven single arm prospective studies and one single arm ambispective study published before the 10th of December 2022 were included. These studies evaluated the success of root canal re-treatment, obturated with gutta percha with at least a 1-year follow-up. Nine of the studies were published between 1998 and 2022. Seven studies were conducted in Europe, one in North America and one in Asia. DATA EXTRACTION AND SYNTHESIS: Standard Cochrane methods to assess interval validity were used. Risk of bias in individual studies was assessed using The Newcastle-Ottawa quality assessment scale (NOS) for single-arm studies, and the Cochrane risk of bias tool (RoB2) was used for randomised controlled trials. Outcome measures were standardised as either success or failure of root canal retreatment. Success was classified into 2 different criteria: Strict criteria = absence of clinical signs and symptoms and radiographically normal periodontal ligament space; and Loose criteria = absence of clinical signs and symptoms and absence or reduction of apical radiolucency in the control radiograph. Statistical analysis was undertaken using R software and the Freeman-Turkey transformation was performed. Results were visualised using forest plots. Heterogeneity between studies was measured using the Cochrane Q test and I2 values. RESULTS: Whilst following strict criteria, the success rate of non-surgical root canal retreatment obturated with gutta percha was 71% for 1-3 years follow-up (95% CI, 0.66-0.77) and 77% for 4-5 years follow-up (95% CI, 0.67-0.86). Heterogeneity was moderate (I2 = 61.4) and low (I2 = 0.0), respectively. Factors reducing the success rate of root canal re-retreatment under the strict criteria were older patients, mandibular teeth, molar teeth, the presence of a peri-apical radiolucency, teeth with a previous radiolucency, large peri-apical radiolucency's, higher initial periapical index scores and multiple visit-retreatments. Following the loose criteria, the success rate of non-surgical root canal re-treatment obturated with gutta percha was 87% for 1-3 years follow-up (95% CI, 0.79-0.93) with significant heterogeneity across the studies (I2 = 88.5%). Factors influencing the success rate under the loose criteria were large periapical lesions >5 mm and higher initial periapical index (PAI) scores. CONCLUSIONS: Non-surgical root canal retreatment results in favourable outcomes. However, there are several factors which can result in a lower success rate: the presence and size of a periapical radiolucency, a higher initial PAI score, multiple-visit retreatments, and the size and position of the tooth.

Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system.

This study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.

Clinical Approach to Dental Root Canal Filler-Induced Maxillary Sinus Fungal Mass Using Transnasal Endoscopy.

Accidentally extruded root canal filler within the sinuses may induce maxillary sinusitis with fungal mass. The authors describe 2 cases of gutta-percha-induced fungal masses in the left maxillary sinus of 2 women. The lesions were evaluated preoperatively using both computed tomography and magnetic resonance imaging, providing comprehensive insights into the condition. In one patient, the lesion was located such that it could be resected through the middle meatal antrostomy alone. However, the second patient presented with an anteroinferiorly situated lesion that necessitated not only a transnasal approach but also an endoscopic modified medial maxillectomy. Both patients recovered uneventfully after surgery. This case series is the first published report of 2 cases of gutta-percha-induced maxillary sinus fungal masses, with their imaging findings, successfully treated through different routes through transnasal endoscopic surgery. These reports highlight the need for a collaborative approach between dental practitioners and otolaryngologists. In addition to the patient's wishes, surgical interventions must consider the unique characteristics of each case and the potential for collaboration across different medical specialties.

Assessment of dental students' knowledge and performance of master gutta-percha cone selection and fitting during root canal treatment: a pilot study.

BACKGROUND: Misconceptions should be detected early in dental students' training to improve their clinical performance. Accordingly, this study aimed to assess undergraduate dental students' knowledge and performance of master gutta-percha (GP) cone selection and fitting during clinical endodontic courses at the College of Dentistry, King Saud University. METHODS: Ninety-nine undergraduate dental students completed an online survey about their knowledge of master GP cone selection. Forty-five of these students were observed by faculty members in clinical endodontic courses while they fitted master GP cones during root canal treatments. The observers recorded the details of each student's cone-fitting techniques. The data were analysed using t-tests, one-way analysis of variance, and chi-square tests (p < 0.05). Inter- and intra-observer reliability were tested using Fliess' Kappa. RESULTS SURVEY: All participants had good knowledge of over-extended cone management, while 80.8% knew how to properly manage a short cone. The proper flaring assessment method was selected by 86.9% of the female and 34.2% of the male students, and this difference was statistically significant (p = 0.0001). OBSERVATION: The students labelled the working length on the master GP cone with an indentation in 64.4% of the cases and by bending the cone 35.6% of the time. Of all students, 84.4% encountered an apical stop, and this rate correlated significantly with the length of the cone on the master apical cone radiograph (p = 0.001). Improper shaping of the canal was the most common cause of ill-fitting cones (83.3%), while 16.7% of the students chose the wrong cone size. The final obturation length was adequate in 80% of the cases; 57.8% of the students were helped by instructors. CONCLUSIONS: Most students had the basic knowledge required to solve problems related to the selection of master GP cones. However, in the clinical setting, more than half of the students required the assistance of an instructor to adjust their cone's fit. The presence of an apical stop had the most significant effect on the length of the fitted master GP cone on radiography. The most common cause of ill-fitting master cones was improper shaping of the canal.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

The efficacy of premixed bioceramic sealers versus standard sealers on root canal treatment outcome, extrusion rate and post-obturation pain: A systematic review and meta-analysis.

BACKGROUND: Limited evidence is available regarding the superior clinical properties of bioceramic sealers comparted with traditional standard sealers. OBJECTIVES: This review aimed to answer the following research questions: 'In healthy patients requiring a root canal treatment (P), what is the efficacy of premixed bioceramic sealers (I) compared with traditional root canal epoxy resin-based sealers (C) in terms of survival, success rates (PICO1) sealer extrusion and resorption (PICO2) post-obturation pain (PICO3) (O)?' METHODS: Authors independently searched three electronic databases: PubMed (including MEDLINE), Web of Science, Embase and Scopus up to 31 October 2023. This was accompanied by both grey literature and manual search. Detailed selection criteria were applied, namely mature permanent teeth requiring root canal treatment, premixed bioceramic sealer with gutta-percha as an intervention group, a standard filling technique as control group and full-text available in English. A random-effect meta-analysis was used to synthesize the body of evidence regarding the use of bioceramic sealers in root canal treatment and their impact on post-obturation pain. Effect sizes were represented as relative risks on a logarithmic scale for binary outcomes and as mean differences for continuous outcomes. RESULTS: A total of 941 articles were identified. Fifteen Comparative clinical studies were finally included. Eleven were randomized clinical trials, and four were prospective clinical trials with control group. The follow-up of these studies was not greater than 2 years. No publication bias was observed in any study. No significant differences were observed between the two groups in terms of survival and success rates. A small non-significant lower risk of extrusion was observed for bioceramics. A small, non-significantly lower post-operative-pain within 24-h was observed when bioceramics were used. DISCUSSION: The majority of current evidence shows inconsistencies in reporting and is of short-term duration. Robust prospective long-term trials are needed in this area to better support future recommendations. CONCLUSION: This systematic review is the first to analyse several clinical outcomes using premixed sealers. Included studies differed in terms of clinical protocol and operator expertise, but reported a similar outcome when comparing bioceramic versus standard sealers. Tooth survival, treatment outcome, post-operative pain and periapical extrusion were similar and presented no significant differences between the two sealer types. REGISTRATION: PROSPERO database (CRD42023449151).

Sealing ability of various endodontic sealers with or without ethylenediaminetetraacetic acid (EDTA) treatment on bovine root canal.

This study investigated the wettability and consistency of various endodontic sealers, both inorganic and organic, and evaluated their sealing ability of root canals using the single-cone obturation technique, with and without ethylenediaminetetraacetic acid (EDTA) treatment. Bovine root canals were endodontically prepared and filled in preparation for the dye penetration test with toluidine blue solution. All sealers exhibited contact angles similar to or lower than dentin and displayed superior consistency. Among the sealers, organic sealers used without EDTA treatment showed reduced dye penetration compared to inorganic sealers. However, some inorganic and organic sealers showed dye penetration in the sealer and dentin of root canals subjected to EDTA treatment. In conclusion, the single-cone obturation technique, combined with these endodontic sealers, achieved close contact with root canal dentin due to their wettability and consistency. However, the sealing ability of certain sealers was influenced by EDTA treatment.

Hard tissue formation in pulpotomized primary teeth in dogs with nanomaterials MCM-48 and MCM-48/hydroxyapatite: an in vivo animal study.

BACKGROUND: This animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA). METHODS: This in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6-8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4-6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent. RESULTS: The data were analyzed using the Kruskal‒Wallis, Fisher's exact, Spearman's, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320). CONCLUSION: MCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation.

Impact of Access Cavity Design on Fracture Resistance of Endodontically Treated Maxillary First Premolar: In Vitro.

This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD). For groups I and VI, only composite restoration was used to restore the proximal cavity, while for groups II- V, the access was prepared and endodontic treatment was performed on all teeth, then composite restoration was placed. The root canals were instrumented using nickel-titanium files, irrigated with sodium hypochlorite, and filled with AH plus sealer and gutta-percha using warm vertical condensation. All samples were then placed in an acrylic mold and underwent thermal aging for 10,000 cycles between 5 and 55°C. The samples were fixed in a universal testing machine with the long axis of the roots positioned at 20° to a load applied at a crosshead speed of 1 mm/min using a stainless steel semi-spherical indenter (Ø = 3 mm) until fracture occurred to determine the fracture resistance force in Newton. The normality test (Shapiro-Wilk) showed that data are normally distributed. Group II exhibited the highest mean fracture resistance, and group VI was the least likely to resist the fracture. No statistically significant differences between tested groups (p-value = 0.237). The MOD group showed a more unfavorable mode of fracture compared to other groups. No significant difference in fracture resistance between conservative and traditional access cavities. The missing marginal ridges, such as in MOD cavities played an important role in decreasing the fracture resistance of endodontically treated teeth.

Expert consensus on difficulty assessment of endodontic therapy.

Endodontic diseases are a kind of chronic infectious oral disease. Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha. However, it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy (RCT). Recent research, encompassing bacterial etiology and advanced imaging techniques, contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT. Success in RCT hinges on factors like patients, infection severity, root canal anatomy, and treatment techniques. Therefore, improving disease management is a key issue to combat endodontic diseases and cure periapical lesions. The clinical difficulty assessment system of RCT is established based on patient conditions, tooth conditions, root canal configuration, and root canal needing retreatment, and emphasizes pre-treatment risk assessment for optimal outcomes. The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT. These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study.

AIM: The aim of this present study was to compare the dislodgement resistance of calcium silicate-based sealer, zinc oxide sealer, and a new sealer combining both zinc oxide and calcium silicate-based sealer in vitro. MATERIALS AND METHODS: 60 single-rooted human teeth were instrumented with F3 Protaper Gold. All endodontic canals were filled using gutta percha cones using the cold lateral condensation technique in combination using one of the mentioned sealers (n = 20 per group). The teeth were divided into three groups: group A consisted of Sealite® Ultra, group B consisted of K-Sealer®, and group C consisted of BioRoot® RC. After 2 months of incubation (37°C, 100% humidity) and after cutting out 2 mm from the most apical portion of the root apex, six slices of 1 mm thickness were generated. Mechanical dislodgement resistance was examined using a universal pressure-testing machine and the push-out bond strength (POBS) was calculated. Specimens were examined under 20× magnification to define the bond failure mode. Statistical analysis was executed using ANOVA, post hoc Turkey test for pairwise comparisons and Kruskal-Wallis tests. RESULTS: The POBS of BioRoot® was significantly higher than the POBS of the two other sealers with a mean of 10.54 MPa ± 2.10 and 5.73 MPa ± 2.34, respectively (p < 0.001). Sealite® and K-Sealer® showed similar results in the median and coronal part. K-Sealer® revealed highest POBS compared with Sealite® in the apical part (p < 0.05). CONCLUSION: The POBS of the zinc oxide and calcium silicate-based sealer was significantly lower compared with calcium silicate. Sealite® and K-Sealer® exhibited almost same results. BioRoot showed the highest POBS of all sealers. CLINICAL SIGNIFICANCE: The current study was needed to evaluate the bond strength of three different cements to dentinal walls, by evaluating their respective POBS in vitro. The findings of this study may provide guidance for the clinician in the selection of an adequate endodontic sealer that guarantees an enhanced adhesive seal between the Gutta-percha and the dentinal canal walls. How to cite this article: Makhlouf MP, El Helou JD, Zogheib CE, et al. Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study. J Contemp Dent Pract 2024;25(1):15-19.

Evaluation of stress distributions of calcium silicate-based root canal sealer in bulk or with main core material: A finite element analysis study.

This research aimed to assess the stress distribution in lower premolars that were obturated with BioRoot RCS or AH Plus, with or without gutta percha (GP), and subjected to vertical and oblique forces. One 3D geometric model of a mandibular second premolar was created using SolidWorks software. Eight different scenarios representing different root canal filling techniques, single cone technique with GP and bulk technique with sealer only with occlusal load directions were simulated as follows: Model 1 (BioRoot RCS sealer and GP under vertical load [VL]), Model 2 (BioRoot RCS sealer and GP under oblique load [OL]), Model 3 (AH Plus sealer with GP under VL), Model 4 (AH Plus sealer with GP under OL), Model 5 (BioRoot RCS sealer in bulk under VL), Model 6 (BioRoot RCS in bulk under OL), Model 7 (AH Plus sealer in bulk under VL), and Model 8 (AH Plus sealer in bulk under OL). A static load of 200 N was applied at three occlusal contact points, with a 45° angle from lingual to buccal. The von Mises stresses in root dentin were higher in cases where AH Plus was used compared to BioRoot RCS. Furthermore, shifting the load to an oblique direction resulted in increased stress levels. Replacing GP with sealer material had no effect on the dentin maximum von Mises stress in BioRoot RCS cases. Presence of a core material resulted in lower stress in dentin for AH Plus cases, however, it did not affect the stress levels in dentin for cases filled with BioRoot RCS. Stress distribution in the dentin under oblique direction was higher regardless of sealer or technique used.

Effect of gutta-percha solvents on the push-out bond strength to root dentin of a syringe-mixed resin sealer and premixed bioceramic sealer.

PURPOSE: To assess the push out bond strength (POBS) of a syringe-mixed resin sealer and a premixed bioceramic sealer to root dentin exposed to different gutta-percha (GP) solvents and to determine the mode of failure. METHODS: A total of 200 horizontal root slices (1 mm thickness) were prepared up to size 40, 0.04 taper and randomly divided into four main groups based on solvent (Endosolv, orange oil, chloroform) and control (saline), then subdivided into two subgroups based on sealer type (AH Plus Jet and iRoot SP). Samples were exposed to respective solvents for 5 minutes and after the final rinsing, canal spaces were filled with either AH Plus Jet or iRoot SP. POBS test was performed 2 weeks after incubation and mode of failure following POBS test was evaluated. Data were analyzed using two-way ANOVA and Dunnett post hoc analysis (P< 0.05). Failure mode patterns were categorized as adhesive, cohesive and mixed failures. RESULTS: There was no significant difference (P> 0.05) in POBS between all solvent groups against the control in both AH Plus Jet and iRoot SP groups. Regardless of the use of solvents, AH Plus Jet group had significantly higher bond strength (P< 0.001) compared to iRoot SP group. The predominant mode of failure was mixed failure in all groups irrespective of type of sealer and exposure to solvents. CLINICAL SIGNIFICANCE: This study showed that exposure to gutta-percha solvents (chloroform, orange oil and Endosolv) for 5 minutes did not affect the bond strengths of both iRoot SP (bioceramic sealer) and AH Plus (resin sealer) to root dentin.

The Effect of Different Obturation Techniques Using Different Root Canal Sealers on the Residual Filling Material After Retreatment Procedures.

BACKGROUND: This study aimed to compare the effect of different obturation techniques with root canal sealers on the residual filling material after retreatment using SEM. MATERIAL AND METHOD: Sixty (60) single rooted mandibular premolars were selected and instrumented with rotary files using the Mtwo system up to file size 30/.05 taper. The samples were randomly divided to two groups based on the type of sealer and three sub-groups (n=10) based on the obturating technique used. The root fillings were removed using the PTUR system files and the specimens were longitudinally sectioned while digital images were obtained from the root canals with SEM. The time required to reach working lenght were recorded. RESULTS: There was no difference in terms of the smear score when comparing both sealer and obturation technique groups in the apical third. Smear scores were significantly affected by the type of sealer and obturation technique in the medium and coronal thirds of root canals (p<0.05). Higher smear scores were obtained with GFB than AH Plus (p<0.05). The time required to reach working length with GFB was longer than AH Plus (p<0.05). CONCLUSION: Residual filling material was observed in all samples, regardless of the root canal sealer or the obturation technique used. There was a significantly lower smear scores in the AH Plus groups as compared to the GFB.

Platelet rich fibrin and MTA in the treatment of teeth with open apices.

BACKGROUND: The present study aimed to evaluate the effectiveness of using platelet-rich fibrin (PRF) as the apical matrix for the placement of MTA in nonsurgical endodontic therapy for teeth with periapical lesions and open apices. METHODS: Twelve teeth from eleven patients with periapical periodontitis and open apices were enrolled in the study. Nonsurgical endodontic therapy was performed with the PRF used as an apical barrier and the MTA manipulated as an apical plug for further thermoplasticized gutta percha in the remaining part of the root canal. Clinical signs and periapical digital radiographs were recorded and analyzed to evaluate the curing progress after periodical follow-ups of 1, 3, and 6 months. The horizontal dimension of the periapical lesion was determined, and the changes in the dimensions were recorded each time. The Friedman test was used for statistical analysis, with P < .05 serving as the threshold for determining statistical significance. RESULTS: All patients had no clinical symptoms after the first month of treatment, with a significant reduction in the periapical lesion after periodical appointments. CONCLUSIONS: PRF is an effective barrier when combined with MTA for the treatment of teeth with periapical periodontitis and open apices.