Multi-walled carbon nanotubes functionalized with a new Schiff base containing phenylboronic acid residues: application to the development of a bienzymatic glucose biosensor using a response surface methodology approach.

An innovative supramolecular architecture is reported for bienzymatic glucose biosensing based on the use of a nanohybrid made of multi-walled carbon nanotubes (MWCNTs) non-covalently functionalized with a Schiff base modified with two phenylboronic acid residues (SB-dBA) as platform for the site-specific immobilization of the glycoproteins glucose oxidase (GOx) and horseradish peroxidase (HRP). The analytical signal was obtained from amperometric experiments at - 0.050 V in the presence of 5.0 × 10-4 M hydroquinone as redox mediator. The concentration of GOx and HRP and the interaction time between the enzymes and the nanohybrid MWCNT-SB-dBA deposited at glassy carbon electrodes (GCEs) were optimized through a central composite design (CCD)/response surface methodology (RSM). The optimal concentrations of GOx and HRP were 3.0 mg mL-1 and 1.50 mg mL-1, respectively, while the optimum interaction time was 3.0 min. The bienzymatic biosensor presented a sensitivity of (24 ± 2) × 102 µA dL mg-1 ((44 ± 4) × 102 µA M-1), a linear range between 0.06 mg dL-1 and 21.6 mg dL-1 (3.1 µM-1.2 mM) (R2 = 0.9991), and detection and quantification limits of 0.02 mg dL-1 (1.0 µM) and 0.06 mg dL-1 (3.1 µM), respectively. The reproducibility for five sensors prepared with the same MWCNT-SB-dBA nanohybrid was 6.3%, while the reproducibility for sensors prepared with five different nanohybrids and five electrodes each was 7.9%. The GCE/MWCNT-SB-dBA/GOx-HRP was successfully used for the quantification of glucose in artificial human urine and commercial human serum samples.

Immobilization of Horseradish Peroxidase onto Montmorillonite/Glucosamine-Chitosan Composite for Electrochemical Biosensing of Polyphenols.

Glucosamine-chitosan synthesized by the Maillard reaction was combined with montmorillonite to obtain a nanohybrid composite to immobilize horseradish peroxidase. The material combines the advantageous properties of clay with those of the chitosan derivative; has improved water solubility and reduced molecular weight and viscosity; involves an eco-friendly synthesis; and exhibits ion exchange capacity, good adhesiveness, and a large specific surface area for enzyme adsorption. The physicochemical characteristics of the composite were analyzed by infrared spectroscopy and X-ray diffraction to determine clay-polycation interactions. The electrochemical response of the different polyphenols to glassy carbon electrodes modified with the composite was evaluated by cyclic voltammetry. The sensitivity and detection limit values obtained with the biosensor toward hydroquinone, chlorogenic acid, catechol, and resorcinol are (1.6 ± 0.2) × 102 µA mM-1 and (74 ± 8) nM; (1.2 ± 0.1) × 102 µA mM-1 and (26 ± 3) nM; (16 ± 2) µA mM-1 and (0.74 ± 0.09) µM; and (3.7± 0.3) µA mM-1 and (3.3 ± 0.2) µM, respectively. The biosensor was applied to quantify polyphenols in pennyroyal and lemon verbena extracts.

Novel and highly stable strategy for the development of microfluidic enzymatic assays based on the immobilization of horseradish peroxidase (HRP) into cotton threads.

The use of biological components in the development of new methods of analysis and point-of-care (POC) devices is an ever-expanding theme in analytical chemistry research, due to the immense potential for early diagnosis of diseases and monitoring of biomarkers. In the present work, the evaluation of an electrochemical microfluidic device based on the immobilization of horseradish peroxidase (HRP) enzyme into chemically treated cotton threads is described. This bioreactor was used as a channel for the build of the microfluidic device, which has allowed to use of a non-modified screen-printed electrode (SPE) as an amperometric detector. Cotton threads were treated using citric acid, and the immobilization of HRP has been performed by EDC/NHS crosslinking, connecting amine groups of the enzymes to carboxylic acids in the cellulosic structure. For the analytical evaluation, an amperometric assay for hydrogen peroxide detection was performed after the injection of H2O2 and hydroquinone (HQN) concomitantly. The enzymatic reaction consumes H2O2 leading to the formation of O-quinone, which is readily reducible at non-modified SPE. Several experimental parameters related to enzyme immobilization have been investigated and under the best set of conditions, a good analytical performance was obtained. In addition, the threads were freezer-stored and, after 12 weeks, 84% of hydrogen peroxide sensitivity was maintained, which is very reasonable for enzyme-based systems and still offers good analytical precision. Therefore, a simple and inexpensive microfluidic system was reported by crosslinking carboxylic groups to amine-containing macromolecules, suggesting a new platform for many other protein-based assays.

Improving the sensitivity for hydrogen peroxide determination with active V2O5 nanocubes incorporated on mesoporous TiO2.

The capacity to generate a constant signal response from an enzyme on an electrode surface has been a fascinating topic of research from the past three decades. To nourish the enzymatic activity during electrochemical reactions, the immobilization of dual enzymes on the electrode surface could prevent the enzymatic loss without denaturation and thus long-term stability can be achieved. For effective immobilization of dual enzymes, mesoporous materials are the ideal choice because of its numerous advantages such as 1. The presence of porous structure facilitates high loading of enzymes 2. The formation of protective environment can withstand the enzymatic activity even at acidic or basic pH values and even at elevated temperatures. Herein, we develop bienzymatic immobilization of horseradish peroxidase (HRP) and cholesterol oxidase (ChOx) on mesoporous V2O5-TiO2 based binary nanocomposite for effective sensing of hydrogen peroxide (H2O2) in presence of redox mediator hydroquinone (HQ). The utilization of redox mediator in second-generation biosensing of H2O2 can eliminate the interference species and reduces the operating potential with higher current density for electrochemical reduction reaction. Using this mediator transfer process approach at HRP/ChOx/V2O5-TiO2 modified GC, the H2O2 can be determined at operating potential (-0.2 V) with good linear range (0.05-3.5 mM) higher sensitivity (1040 µAµM-1 cm-2) and lower detection limit of about 20 µM can be attained, which is due to higher mediation of electrons were transferred to the enzyme cofactors. These interesting characteristics could be due to mesoporous structure of V2O5-TiO2 can induce large immobilization and facilitate higher interaction with enzymes for wide range of biosensing applications.

Photosensitive Polymeric Janus Micromotor for Enzymatic Activity Protection and Enhanced Substrate Degradation.

Immobilizing enzymes into microcarriers is a strategy to improve their long-term stability and reusability, hindered by (UV) light irradiation. However, in such approaches, enzyme-substrate interaction is mediated by diffusion, often at slow kinetics. In contrast, enzyme-linked self-propelled motors can accelerate this interaction, frequently mediated by the convection mechanism. This work reports on a new photosensitive polymeric Janus micromotor (JM) for UV-light protection of enzymatic activity and efficient degradation of substrates accelerated by the JMs. The JMs were assembled with UV-photosensitive modified chitosan, co-encapsulating fluorescent-labeled proteins and enzymes as models and magnetite and platinum nanoparticles for magnetic and catalytic motion. The JMs absorbed UV light, protecting the enzymatic activity and accelerating the enzyme-substrate degradation by magnetic/catalytic motion. Immobilizing proteins in photosensitive JMs is a promising strategy to improve the enzyme's stability and hasten the kinetics of substrate degradation, thereby enhancing the enzymatic process's efficiency.

A sandwich-type electrochemical immunosensor based on Au-rGO composite for CA15-3 tumor marker detection.

A sensitive detection of carbohydrate antigen 15-3 (CA15-3) levels may allow for early diagnosis and monitoring the treatment of breast cancer, but this can only be made in routine clinical practice if low-cost immunosensors are available. In this work, we developed a sandwich-type electrochemical immunosensor capable of rapid detection of CA15-3 with an ultra-low limit of detection (LOD) of 0.08 fg mL-1 within a wide linear concentration range from 0.1 fg mL-1 to 1 µg mL-1. The immunosensor had a matrix of a layer-by-layer film of Au nanoparticles and reduced graphene oxide (Au-rGO) co-electrodeposited on screen-printed carbon electrodes (SPCE). The high sensitivity was achieved by using secondary antibodies (Ab2) labeled with horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H2O2) as signal amplifiers, and hydroquinone (HQ) was used as an electron mediator. The immunosensor was selective for CA15-3 in human serum and artificial saliva samples, robust, and stable to permit storage at 4 °C for more than 30 days. With its high performance, the immunosensor may be incorporated into future point-of-care (POC) devices to determine CA15-3 in distinct biological fluids, including in blood and saliva samples.

Thermodynamic and structural aspects of molecular recognition in mannose-binding protein complexes: a theoretical study over HRP-ArtinM association.

The biomolecular recognition of D-mannose-binding lectin from Artocarpus heterophyllus (ArtinM) by Horseradish Peroxidase (HRP) mediated by glycosylation allows their application in a multitude of biological systems. The present work describes the use of molecular dynamics (MD) to assess the Gibbs free energy associated with the formation of a ArtinM-HRP conjugate mediated by a glycosylation molecule. For the enthalpy term, we applied the molecular mechanics Poisson-Boltzmann surface area (MM-PBSA) method and for the vibrational entropy term, we use the quasi-harmonic approximation. Our results show that, even without glycosylation, the binding free energy between ArtinM and HRP is - 196.154 kJmol- 1, an extremely high affinity with low selectivity, originated mainly through the van der Waals energy terms. The binding free energy between ArtinM and the glycosylated HRP (gHRP) was calculated at - 66.156 kJmol- 1, an absolute and considerably lower value, however, originated from electrostatic energy terms, which increases the selectivity of molecular recognition. Our work has shown that the HRP active site region has a high affinity and low selectivity for other biomolecules. The presence of glycosylation plays a role in increasing this selectivity for this region. Thus, we conclude that performing mutagenesis of amino acid residues near the entrance of the catalytic site, can improve the activity of non-glycosylated HRPs. This illustrates new insights that can be applied to carbohydrate-based immunochemistry.

l-Tryptophan Interactions with the Horseradish Peroxidase-Catalyzed Generation of Triplet Acetone.

Triplet carbonyls generated by chemiexcitation are involved in typical photobiochemical processes in the absence of light. Due to their biradical nature, ultraweak light emission and long lifetime, electronically excited triplet species display typical radical reactions such as isomerization, fragmentation, cycloaddition and hydrogen abstraction. In this paper, we report chemical reactions in a set of amino acid residues induced by the isobutanal/horseradish peroxidase (IBAL/HRP) system, a well-known source of excited triplet acetone (Ac3* ). Accordingly, quenching of Ac3* by tryptophan (Trp) unveiled parallel enzyme damage and inactivation, likely explained by scavenging of IBAL tertiary radical reaction intermediate and Ac3* -derived 2-hydroxy-i-propyl radical. Quenching constants were calculated from Stern-Volmer plots, and the structure of radical adducts was revealed by mass spectrometry. As expected, a concurrent Schiff-type adduct was found to be one of the reaction by-products. These findings draw attention to potential structural and functional changes in enzymes involved in the electronic chemiexcitation of their products.

Experimental and theoretical affinity and catalysis studies between halogenated phenols and peroxidases: Understanding the bioremediation potential.

Halogenated phenols, such as 2,4-dichlorophenol (2,4-DCP) and 4-bromophenol (4-BP) are pollutants generated by a various industrial sectors like chemical, dye, paper bleaching, pharmaceuticals or in an agriculture as pesticides. The use of Horseradish peroxidase (HRP) in the halogenated phenols treatment has already been mentioned, but it is not well understood how the different phenolic substrates can bind in the peroxidase active site nor how these specific interactions can influence in the bioremediation potential. In this work, different removal efficiencies were obtained for phenolic compounds investigated using HRP as catalyst (93.87 and 59.19% to 4BP and 2,4 DCP, respectively). Thus, to rationalize this result based on the interactions of phenols with active center of HRP, we combine computational and experimental methodologies. The theoretical approaches utilized include density functional theory (DFT) calculations, docking simulation and quantum mechanics/molecular mechanics (QM/MM) technique. Michaelis Menten constant (Km) obtained through experimental methodologies were 2.3 and 0.95 mM to 2,4-DCP and 4-BP, respectively, while the specificity constant (Kcat/Km) found was 1.44 mM-1 s-1 and 0.62 mM-1 s-1 for 4-BP and 2,4-DCP, respectively. The experimental parameters appointed to the highest affinity of HRP to 4-BP. According to the molecular docking calculations, both ligands have shown stabilizing intermolecular interaction energies within the HRP active site, however, the 4-BP showed more stabilizing interaction energy (-53.00 kcal mol-1) than 2,4-dichlorophenol (-49.23 kcal mol-1). Besides that, oxidative mechanism of 4-BP and 2,4-DCP was investigated by the hybrid QM/MM approach. This study showed that the lowest activation energy values for transition states investigated were obtained for 4-BP. Therefore, by theoretical approach, the compound 4-BP showed the more stabilizing interaction and activation energy values related to the interaction within the enzyme and the oxidative reaction mechanism, respectively, which corroborates with experimental parameters obtained. The combination between experimental and theoretical approaches was essential to understand how the degradation potential of the HRP enzyme depends on the interactions between substrate and the active center cavity of the enzyme.

PEDOT-polyamine composite films for bioelectrochemical platforms - flexible and easy to derivatize.

We report a straightforward route for the preparation of flexible, electrochemically stable and easily functionalizable poly(3,4-ethylenedioxythiophene) (PEDOT) composite films deposited on PET foils as biosensing platforms. For this purpose, poly(allylamine) hydrochloride (PAH) was blended with PEDOT to provide amine-bearing sites for further biofunctionalization as well as to improve the mechanical properties of the films. The conducting PEDOT-PAH composite films were characterized by cyclic voltammetry, UV-vis and Raman spectroscopies. An exhaustive stability study was carried out from the mechanical, morphological and electrochemical viewpoint. Subsequent sugar functionalization of the available amine groups from PAH allowed for the specific recognition of lectins and the subsequent self-assembly of glycoenzymes (glucose oxidase and horseradish peroxidase) concomitant with the prevention of non-specific protein fouling. The platforms presented good bioelectrochemical performance (glucose oxidation and hydrogen peroxide reduction) in the presence of redox mediators. The developed composite films constitute a promising option for the construction of all-polymer biosensing platforms with great potential owing to their flexibility, high transmittance, electrochemical stability and the possibility of glycosylation, which provides a simple route for specific biofunctionalization as well as an effective antifouling strategy.

Paper surface modification strategies employing N-SBA-15/polymer composites in bioanalytical sensor design.

In this work, different paper surface modification strategies were compared to obtain an amine functionalized SBA-15 (N-SBA-15) composite for paper-based device development. The synthesized N-SBA-15 was characterized by N2 adsorption-desorption isotherm, and infrared spectroscopy (FTIR), and it was incorporated to different polymer matrices (κ-carrageenan (CA), polyvinyl alcohol (PVA) and polyethylenimine (PEI)) for the development of the composite modified paper-based device. The retention, interactions, and morphology of the obtained composites were investigated by absorbance measurement, FTIR and scanning electron microscopy (SEM), respectively. To demonstrate the applicability of the modified paper-based device, ascorbic acid (AA) quantification was carried out. Horseradish peroxidase (HRP) was immobilized onto the modified paper surface. HRP in the presence of H2O2 catalyzes the oxidation of 10-acetyl-3,7-dyhidroxyphenoxazine (ADHP) to highly fluorescent resorufin, which was measured by LIF detector. Thus, when AA was added to the solution, it decreases the relative fluorescence signal proportionally to the AA concentration. The linear range from 50 nmol L-1 to 1500 nmol L-1 and a detection limit of 15 nmol L-1 were obtained for AA quantitation. The obtained results allowed us to conclude that N-SBA-15/PEI composite could be considered an excellent choice for the paper-based device modification procedure due to its inherent simplicity, low cost, and sensitivity.

New bioanalytical platform based on the use of avidin for the successful exfoliation of multi-walled carbon nanotubes and the robust anchoring of biomolecules. Application for hydrogen peroxide biosensing.

We are reporting an innovative building-block for the development of biosensors based on the non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) with avidin (MWCNTs-avidin). In this work, at variance with previous reports, avidin has the double role of simultaneously being the exfoliating agent of MWCNTs and the platform for anchoring different biotinylated biomolecules. The optimum dispersion was obtained by sonicating for 5.0 min 0.50 mgmL-1 MWCNTs with 1.00 mgmL-1 avidin solution prepared in 50:50 v/v ethanol/water. As proof-of-concept, we immobilized biotinylated horseradish peroxidase (b-HRP) at glassy carbon electrodes (GCE) modified with MWCNTs-avidin to develop a hydrogen peroxide biosensor using hydroquinone as redox mediator. Surface plasmon resonance, electrochemical impedance spectroscopy, cyclic voltammetry and amperometry demonstrated that, even after the partial denaturation of avidin due to the drastic conditions used to functionalize the MWCNTs, it preserves the biorecognition properties and efficiently interacts with biotinylated horseradish peroxidase (b-HRP). The analytical characteristics of the resulting hydrogen peroxide biosensor are the following: linear range between 1.0 × 10-6 M and 1.4 × 10-5 M, sensitivity of (1.37 ±â€¯0.04) x 105 µAM-1, detection limit of 24 nM and reproducibility of 2.9%. The sensor was challenged with different samples, a mouthwash solution, human blood serum and milk, with very good performance.

Design of stable magnetic hybrid nanoparticles of Si-entrapped HRP.

Hybrid and composite nanoparticles represent an attractive material for enzyme integration due to possible synergic advantages of the structural builders in the properties of the nanobiocatalyst. In this study, we report the synthesis of a new stable hybrid nanobiocatalyst formed by biomimetic silica (Si) nanoparticles entrapping both Horseradish Peroxidase (HRP) (EC 1.11.1.7) and magnetic nanoparticles (MNPs). We have demonstrated that tailoring of the synthetic reagents and post immobilization treatments greatly impacted physical and biocatalytic properties such as an unprecedented ~280 times increase in the half-life time in thermal stability experiments. The optimized nanohybrid biocatalyst that showed superparamagnetic behaviour, was effective in the batch conversion of indole-3-acetic acid, a prodrug used in Direct Enzyme Prodrug Therapy (DEPT). Our system, that was not cytotoxic per se, showed enhanced cytotoxic activity in the presence of the prodrug towards HCT-116, a colorectal cancer cell line. The strategy developed proved to be effective in obtaining a stabilized nanobiocatalyst combining three different organic/inorganic materials with potential in DEPT and other biotechnological applications.

Toxicity of enzymatically decolored textile dyes solution by horseradish peroxidase.

The oxidative systems including enzymatic systems have been widely studied as an alternative for textile effluents treatment. However, studies have shown that some oxidative processes can produce degradation products with higher toxicity than the untreated dye. In this work, enzymatic dye decolorization was evaluated by horseradish peroxidase enzyme (HRP) and the toxicity of discoloration products was evaluate against Daphnia magna, Euglena gracilis algae, and Vibrio fischeri. Dye decolorization kinetics data were evaluated and the pseudo-second-order model showed the best-fitting to the experimental data. In addition, it was observed an increased acute and chronic toxicity associated with the decolorization efficiency. The Reactive Blue 19 and Reactive Black dye showed the highest toxicity against D. Magna (16 toxicity factor) and V. Fischeri (32 toxicity factor) after enzymatic decolorization. For the chronic toxicity against D. Magna, Reactive Red was the only dye with no fertility inhibition. In relation to toxicity tests with E. gracilis algae, it was not observed photosynthetic inhibition for all dyes. This study verified the viability of the enzyme horseradish peroxidase in the textile dyes decolorization and the importance to evaluate the decolorization products.

Horseradish peroxidase-mediated decolourization of Orange II: modelling hydrogen peroxide utilization efficiency at different pH values.

Enzymatic decolourization of azo-dyes could be a cost-competitive alternative compared to physicochemical or microbiological methods. Stoichiometric and kinetic features of peroxidase-mediated decolourization of azo-dyes by hydrogen peroxide (P) are central for designing purposes. In this work, a modified version of the Dunford mechanism of peroxidases was developed. The proposed model takes into account the inhibition of peroxidases by high concentrations of P, the substrate-dependant catalatic activity of peroxidases (e.g. the decomposition of P to water and oxygen), the generation of oxidation products (OP) and the effect of pH on the decolourization kinetics of the azo-dye Orange II (OII). To obtain the parameters of the proposed model, two series of experiments were performed. In the first set, the effects of initial P concentration (0.01-0.12 mM) and pH (5-10) on the decolourization degree were studied at a constant initial OII concentration (0.045 mM). Obtained results showed that at pH 9-10 and low initial P concentrations, the consumption of P was mainly to oxidize OII. From the proposed model, an expression for the decolourization degree was obtained. In the second set of experiments, the effect of the initial concentrations of OII (0.023-0.090 mM), P (0.02-4.7 mM), HRP (34-136 mg/L) and pH (5-10) on the initial specific decolourization rate (q0) was studied. As a general rule, a noticeable increase in q0 was observed for pHs higher than 7. For a given pH, q0 increased as a function of the initial OII concentration. Besides, there was an inhibitory effect of high P concentrations on q0. To asses the possibility of reusing the enzyme, repeated additions of OII and P were performed. Results showed that the enzyme remained active after six reuse cycles. A satisfactory accordance between the change of the absorbance during these experiments and absorbances calculated using the proposed model was obtained. Considering that this set of data was not used during the fitting procedure of the model, the agreement between predicted and experimental absorbances provides a powerful validation of the model developed in the present work.

Gold nanoparticles/4-aminothiophenol interfaces for direct electron transfer of horseradish peroxidase: Enzymatic orientation and modulation of sensitivity towards hydrogen peroxide detection.

Hydrogen peroxide electrochemical detection by horseradish peroxidase has been widely studied. The use of gold nanoparticles to prepare electrode/enzyme bioconjugates has attracted attention due to their catalytic properties. In this work, it is reported the use of gold nanoparticles and 4-aminothiophenol as a scaffold to obtain a suitable matrix for enzyme bioconjugation with horseradish peroxidase. A critical factor in biosensors design and development is the enzymatic electrochemical activity understanding. Comparison of voltammetric studies of the heme prosthetic group showed a reversible electrochemical behavior when the enzymes were immobilized in a well-dispersed gold deposit; on the other hand, a discrete redox response was observed on a randomly deposited gold electrode. These results show that the distance between enzymes is essential. Hydrogen peroxide catalysis and the enzymatic behavior were analyzed considering two types of nanoparticles dispositions. The catalytic behavior observed in the well-dispersed nanoparticles configuration suggests a preserved enzyme folding, a decrease of steric impediments, and appears to be a better immobilization strategy. In contrast, the randomly electrodeposited gold electrode decreased the enzyme orientation and the electrochemical activity. The advantages of this methodology are the electrode fabrication affordable cost and the enzymatic direct electron transfer response improvement.

Polymerization of coniferyl alcohol by Mn3+ -mediated (enzymatic) oxidation: Effects of H2 O2 concentration, aqueous organic solvents, and pH.

The objective of this study was to evaluate the ability of one versatile peroxidase and the biocatalytically generated complex Mn(III)-malonate to polymerize coniferyl alcohol (CA) to obtain dehydrogenation polymers (DHPs) and to characterize how closely the structures of the formed DHPs resemble native lignin. Hydrogen peroxide was used as oxidant and Mn2+ as mediator. Based on the yields of the polymerized product, it was concluded that the enzymatic reaction should be performed in aqueous solution without organic solvents at 4.5 ≤ pH ≤ 6.0 and with 0.75 ≤ H2 O2 :CA ratio ≤ 1. The results obtained from the Mn3+ -malonate-mediated polymerization showed that the yield was almost 100%. Reaction conditions had, however, effect on the structures of the formed DHPs, as detected by size exclusion chromatography and pyrolysis-GC/MS. It can be concluded that from the structural point of view, the optimal pH for DHP formation using the presently studied system was 3 or 4.5. Low H2 O2 /CA ratio was beneficial to avoid oxidative side reactions. However, the high frequency of ß-ß linkages in all cases points to dimer formation between monomeric CA rather than endwise polymerization. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:81-90, 2018.

Immobilization effects on the photocatalytic activity of CdS quantum Dots-Horseradish peroxidase hybrid nanomaterials.

The potential use of hybrid nanomaterials based on inorganic optically active nanoparticles known as quantum dots (QDs) and horseradish peroxidase (HRP) has been proposed by several authors as light-controllable nanocatalyzers, moreover, the immobilization within or over silica based supports represents an advantage over bulk-dispersed systems. However, the implications of the immobilization of such hybrid photoactivatable catalyzing systems have not been clarified with detail. Here, we present a thorough study of the functional photoactive efficiency and recycling of immobilized CdS QDs and HRP systems with different configurations, immobilized over silanized silica quartz crystal microbalance (QCM) sensors, allowing an accurate measure of the immobilized mass of each component and its correlation with the initial reaction rate of conversion of Amplex Red (AR) to resorufin. As well, the conversion efficiency is compared between the different systems and also to non-immobilized QD-HRP complexed systems.

Immobilization of horseradish peroxidase on Fe3O4 magnetic nanoparticles

Background: Iron magnetic nanoparticles have attracted much attention. They have been used in enzyme immobilization because of their properties such as product is easily separated from the medium by magnetic separation. The present work was designed to immobilize horseradish peroxidase on Fe3O4 magnetic nanopraticles without modification. Results: In the present study, horseradish peroxidase (HRP) was immobilized on non-modified Fe3O4 magnetic nanoparticles. The immobilized HRP was characterized by FT-IR spectroscopy, scanning electron microscopy, and energy dispersive X-ray. In addition, it retained 55% of its initial activity after 10 reuses. The optimal pH shifted from 7.0 for soluble HRP to 7.5 for the immobilized HRP, and the optimal temperature shifted from 40°C to 50°C. The immobilized HRP is more thermostable than soluble HRP. Various substrates were oxidized by the immobilized HRP with higher efficiencies than by soluble HRP. Km values of the soluble and immobilized HRP were 31 and 45 mM for guaiacol and 5.0 and 7.0 mM for H2O2, respectively. The effect of metals on soluble and immobilized HRP was studied. Moreover, the immobilized HRP was more stable against high concentrations of urea, Triton X-100, and isopropanol. Conclusions: Physical immobilization of HRP on iron magnetic nanoparticles improved the stability toward the denaturation induced by pH, heat, metal ions, urea, detergent, and water-miscible organic solvent.

Free and Ca-Alginate Beads Immobilized Horseradish Peroxidase for the Removal of Reactive Dyes: an Experimental and Modeling Study.

The aim of this work was to remove the dyes Reactive Blue 221 (RB 221) and Reactive Blue 198 (RB 198) of synthetic effluent using the immobilized enzyme horseradish peroxidase (HRP) in Ca-alginate beads. Experimental parameters affecting the dye removal process such as the effect of pH, temperature, hydrogen peroxide concentration, mass capsules, and reuse were evaluated, and a numerical model of mass transfer was developed. A maximum removal of 93 and 75%, respectively, for the dyes RB 221 and RB 198, at pH 5.5 and temperature of 30 °C, concentration of hydrogen peroxide of 43.75 µM for dye RB 221 and 37.5 µM for the dye of RB 198 was obtained. A removal reaction of 180 min for RB 221 and 240 min for RB 198 was observed. Three reuse cycles of use of immobilized enzyme were achieved for both dyes. The numerical model proposed led to a good fit compared to experimental data. The HRP enzyme immobilized in Ca-alginate capsules showed a great potential for biotechnological applications, especially for the removal of reactive dyes.