A dopant-assisted iodide-adduct chemical ionization time-of-flight mass spectrometer based on VUV lamp photoionization for atmospheric low-molecular-weight organic acids analysis.

Formic and acetic acids are the most abundant gaseous organic acids and play the key role in the atmospheric chemistry. In iodine-adduct chemical ionization mass spectrometry (CIMS), the low utilization efficiency of methyl iodide and humidity interference are two major issues of the vacuum ultraviolet (VUV) lamp initiated CIMS for on-line gaseous formic and acetic acids analysis. In this work, we present a new CIMS based on VUV lamp, and the ion-molecular reactor is separated into photoionization and chemical ionization zones by a reducer electrode. Acetone was added to the photoionization zone, and the VUV photoionization acetone provided low-energy electrons for methyl iodide to generate I-, and the addition of acetone reduced the amount of methyl iodide by 2/3. In the chemical ionization zone, a headspace vial containing ultrapure water was added for humidity calibration, and the vial changes the sensitivity as a function of humidity from ambiguity to well linear correlation (R2 > 0.95). With humidity calibration, the CIMS can quantitatively measure formic and acetic acids in the humidity range of 0%-88% RH. In this mode, limits of detection of 10 and 50 pptv are obtained for formic and acetic acids, respectively. And the relative standard deviation (RSD) of quantitation stability for 6 days were less than 10.5%. This CIMS was successfully used to determine the formic and acetic acids in the underground parking and ambient environment of the Shandong University campus (Qingdao, China). In addition, we developed a simple model based formic acid concentration to assess vehicular emissions.

Assessment of tooth discoloration induced by root canal filling materials in pediatric dentistry.

This study investigated the potential for tooth discoloration of root canal filling pastes used in pediatric dentistry. Sixty bovine incisors were sectioned 2 mm apical to the cementoenamel junction and allocated into 6 groups (n = 10) according to the type of filling material used: G1- Zinc oxide-eugenol sealer; G2- Zinc oxide-eugenol and iodoform paste; G3- Calcium hydroxide (CH) and zinc oxide paste; G4- CH, zinc oxide, and iodoform paste; G5- CH and iodoform paste; and G6- Control. Polyethylene glycol 400 was used as a vehicle for CH-containing pastes. Color measurements were taken at specific intervals: preceding endodontic treatment (T0) and at successive points of 1 month (T1), 2 months (T2), 3 months (T3), and 1 year (T4) after the placement of the filling material. The color change (∆E) was calculated using the CIELab formula. Statistical analysis was performed using ANOVA, followed by Tukey's post hoc test (α = 5%). Significant differences were observed among the filling materials and time intervals (p <0.001). All groups exhibited color changes over time, except G1 and G5, which showed color changes only after 1 year. G1 and G2 demonstrated the highest ∆E values, with a statistically significant difference observed only at T2 when compared to G3 (p = 0.008). Root canal filling materials used in primary teeth have the potential to induce tooth discoloration.

Refined linkage analysis of the sulphated marine polysaccharide fucoidan of Cladosiphon okamuranus with a focus on fucose.

Methylation followed by depolymerization and gas chromatography (GC) is an effective methodology for the linkage analysis of polysaccharides, including fucoidan, a sulphated algal polysaccharide. However, this sample material demands attention to experimental details to prevent aberrations in the analytical result. The use of deficient bases for methylation, the presence of water, analyte degradation during hydrolysis, and coelution of the target analytes during gas chromatography create doubts about published results. We therefore investigated critical parameters of the method and carefully optimized the steps of the protocol to ensure the integrity of the results for the fucose monomers. Fucoidan from Cladosiphon okamuranus was used as reference sample to determine the glycosidic bonds, and sulphate positions in the monomer. Fucoidan in protonated form was methylated in a strictly water-free environment using lithium dimsyl as base and methyl iodide for methylation. The methylated polymer was isolated by solid phase extraction, which was crucial to recover also the highly sulfated fraction. Hydrolysis was conducted with trifluoroacetic acid. To separate all target analytes in GC-FID/MS, a stationary phase with high cyanopropyl content (HP-88) was required, as the commonly employed phenyl siloxane phases result in co-elution, which distorts the result severely.

Deciduous pulp tissue implantation into the root canal of mandibular incisor resulted in pulp revascularization: a case report with a 5-year follow-up.

To explore a new method to implant deciduous tooth pulp into the canal of young permanent teeth with necrotic pulps and apical periodontitis for the regenerative endodontic treatment of tooth no: 41 in a 7-year-old male. Briefly, 1.5% Sodium Hypochlorite (NaOCl) irrigation and calcium hydroxide-iodoform paste were used as root canal disinfectant at the first visit. After 2 weeks, the intracanal medication was removed, and the root canal was slowly rinsed with 17% Ethylene Diamine Tetraacetic Acid (EDTA), followed by flushing with 20 mL saline and then drying with paper points. Tooth no: 72 was extracted, and its pulp was extracted and subsequently implanted into the disinfected root canal along with induced apical bleeding. Calcium hydroxide iodoform paste was gently placed over the bleeding clot, and after forming a mineral trioxide aggregate (MTA) coronal barrier, the accessed cavities were restored using Z350 resin composite. The root developments were evaluated via radiographic imaging at 6 months, 1 year and 5 years after treatment. Imaging and clinical analysis showed closure of the apical foramen, thickening of the root canal wall, and satisfactory root length growth. Autologous transplantation might be useful to regenerate dental pulp in necrotic young permanent teeth.

Efficient Reductive N-11C-Methylation Using Arylamines or Alkylamines and In Situ-Generated [11C]Formaldehyde From [11C]Methyl Iodide.

Reductive N-11C-methylation using [11C]formaldehyde and amines has been used to prepare N-11C-methylated compounds. However, the yields of the N-11C-methylated compounds are often insufficient. In this study, we developed an efficient method for base-free reductive N-11C-methylation that is applicable to a wide variety of substrates, including arylamines bearing electron-withdrawing and electron-donating substituents. A 2-picoline borane complex, which is a stable and mild reductant, was used. Dimethyl sulfoxide was used as the primary reaction solvent, and glacial acetic acid or aqueous acetic acid was used as a cosolvent. While reductive N-11C-methylation efficiently proceeded under anhydrous conditions in most cases, the addition of water to the reductive N-11C-methylation generally increased the yield of the N-11C-methylated compounds. Substrates with hydroxy, carboxyl, nitrile, nitro, ester, amide, and phenone moieties and amine salts were applicable to the reaction. This proposed method for reductive N-11C-methylation should be applicable to a wide variety of substrates, including thermo-labile and base-sensitive compounds because the reaction was performed under relatively mild conditions (70°C) without the need for a base.

Efficient Transferase Engineering for SAM Analog Synthesis from Iodoalkanes.

S-Adenosyl-l-methionine (SAM) is an important cosubstrate in various biochemical processes, including selective methyl transfer reactions. Simple methods for the (re)generation of SAM analogs could expand the chemistry accessible with SAM-dependent transferases and go beyond methylation reactions. Here we present an efficient enzyme engineering strategy to synthesize different SAM analogs from "off-the-shelf" iodoalkanes through enzymatic alkylation of S-adenosyl-l-homocysteine (SAH). This was achieved by mutating multiple hydrophobic and structurally dynamic amino acids simultaneously. Combinatorial mutagenesis was guided by the natural amino acid diversity and generated a highly functional mutant library. This approach increased the speed as well as the scale of enzyme engineering by providing a panel of optimized enzymes with orders of magnitude higher activities for multiple substrates in just one round of enzyme engineering. The optimized enzymes exhibit catalytic efficiencies up to 31 M-1 s-1, convert various iodoalkanes, including substrates bearing cyclopropyl or aromatic moieties, and catalyze S-alkylation of SAH with very high stereoselectivities (>99 % de). We further report a high throughput chromatographic screening system for reliable and rapid SAM analog analysis. We believe that the methods and enzymes described herein will further advance the field of selective biocatalytic alkylation chemistry by enabling SAM analog regeneration with "off-the-shelf" reagents.

Microstructural Evaluation of the Mineralized Apical Barrier Induced by a Calcium Hydroxide Paste Containing Iodoform: A Case Report.

INTRODUCTION: A 65-year-old man had nonsurgical retreatment using an iodoform and calcium hydroxide paste in a maxillary left canine with persistent apical periodontitis. An apical mineralized barrier (AMB) was observed 3-months postoperatively. Unfortunately, the tooth was extracted due to a cementum tear. This provided an opportunity to analyze the AMB histologically, as there is a lack of previous reports on its microstructure. METHODS: After extraction and removal of the granulation tissue from the root surface, the canine was processed, and observed using micro-computed tomography (µCT) and light microscopy. Thereafter, the specimen was resin-embedded specimen was evaluated by scanning electron microscopy, micro-X-ray fluorescence spectroscopy and Raman spectroscopy to understand the mechanism and nature of the AMB formation during apical healing. RESULTS: Nonsurgical retreatment was clinically successful based on the absence of clinical symptoms of apical periodontitis and the radiographic presence of an AMB. The AMB was opaque and could be readily differentiated from dentin under a light microscope. Micro-computed tomography analysis revealed that the AMB had the same mineral density as dentin. Scanning electron microscopy revealed that the AMB had two distinct layers based on the size of the calcified particles. Elemental mapping using micro-X-ray fluorescence spectroscopy showed that the localization of calcium and phosphorus differed between AMB and other areas of biomineralization. Raman spectral mapping revealed that the surface layer of the AMB consisted of collagen, calcium carbonate, and hydroxyapatite. CONCLUSIONS: This study explored new analytical methods for elucidating the apical wound-healing process and the nature of the mineralized repair. The findings provided detailed information on the AMB highlighting a bilaminar structure with high calcium components higher on the inside and a brightness similar to cementum not dentin and the presence of hydroxyapatite.

Efficacy of antibiotic and iodoform pastes in non-instrumental endodontic treatment of anterior primary teeth-Protocol for a randomized controlled clinical.

The maintenance of the deciduous tooth until its physiological exfoliation occurs is one of the main objectives of pediatric dentistry. Endodontic treatment in deciduous teeth resulting from carious or traumatic lesions with pulpal involvement is often necessary and we often find it difficult to perform it, due to the difficult control of the child, the internal anatomy of the root canals, and root resorptions. The non-instrumental endodontic treatment technique (NIET) associated with antimicrobial drugs has advantages such as shorter chair time and less complexity than the conventional technique in which root canal instrumentation is performed. The aim of this study is to carry out a controlled and randomized clinical trial to compare the effectiveness of (NIET) in primary teeth associated with the use of two obturator pastes. One hundred and twenty necrotic deciduous teeth of children aged between 3 and 6 years will be selected; and the teeth will be divided into two groups. In Group 1 and Group 2, root canals will not be instrumented, just irrigated and filled with the respective pastes, antibiotic (CTZ) and iodoform (Guedes-Pinto). Presence of fistula and mobility will be clinically evaluated. The evaluations will be carried out in both groups on the day of treatment and in periods of 1, 3 and 6 months after treatment. For the main outcome, the tooth will be the unit of analysis and the Kaplan-Meier test will be performed to estimate the survival rates of the included teeth. For comparison between the two groups, Student's t test or Mann-Whitney test will be performed, depending on the normality of the data. In addition, Poisson regression analyzes will be carried out, in order to allow the evaluation of the influence of some variables on the results. For all analyses, the significance value will be adjusted to 5%. Trial registration: NCT04587089 in ClinicalTrials.gov. Approval date: May 15, 2023.

One-pot Dess-Martin periodinane-mediated oxidative deprotection and olefination of trimethylsilyl-protected pyranosides and pyranoses.

The selective functionalization of carbohydrates provides a powerful method for introducing structural complexity, allowing access to unique drug scaffolds with distinctive pharmaceutical profiles. Herein, we describe an efficient and selective carbon-carbon bond forming reaction of a variety of common trimethylsilyl-protected pyranosides and pyranoses at C-6 using a one-pot Dess-Martin periodinane-mediated oxidation deprotection. This is followed by addition of stabilized and non-stabilized ylides to generate alkenoate carbohydrates and related analogs in good to moderate yields. We also report on the rapid deprotection of the remaining trimethylsilyl ether groups in near quantitative yields using an acidic resin-mediated ethanolysis.

Role of iodoform in jaw lesions: a systematic review.

Iodoform formulations are used as packing material following the surgical removal of jaw lesions. The purpose of this review was to explore the evidence and efficacy of iodoform-based dressings. We have systematically reviewed published articles according to the PRISMA statement. The search was conducted in PubMed, Google Scholar, Semantic Scholar, and the Cochrane Library database for articles mentioning the use of iodoform as dressing material for jaw lesions from January 2000 to March 2022. Finally, 92 studies were included. A total of 386 patients whose ages ranged from five months to 86 years (male n = 180, female n = 117). Different formulations of iodoform used were BIPP (n = 67), Whitehead's varnish (n = 17), iodoform (n = 7) and, iodine (n = 1) for its antiseptic properties. An iodoform impregnated gauze pack was changed once a week, most commonly, for a stipulated duration, until complete healing of the cavity. In the present review, iodoform was used, most commonly, in pathological cavities following surgical treatment of ameloblastoma and odontogenic keratocyst. Toxicity was reported in two studies. Based on the current review, iodoform is relatively safe and can be used in the management of extensive jaw lesions in which secondary healing is expected. Prospective and randomised control trials are recommended to assess the efficacy of various formulations and to delineate the timeframe for patient compliance.

Structure-Directing Interplay between Tetrel and Halogen Bonding in Co-Crystal of Lead(II) Diethyldithiocarbamate with Tetraiodoethylene.

The co-crystallization of the lead(II) complex [Pb(S2CNEt2)2] with tetraiodoethylene (C2I4) gave the co-crystal, [Pb(S2CNEt2)2]∙½C2I4, whose X-ray structure exhibits only a small change of the crystal parameters than those in the parent [Pb(S2CNEt2)2]. The supramolecular organization of the co-crystal is largely determined by an interplay between Pb⋯S tetrel bonding (TeB) and I⋯S halogen bonding (HaB) with comparable contributions from these non-covalent contacts; the TeBs observed in the parent complex, [Pb(S2CNEt2)2], remain unchanged in the co-crystal. An analysis of the theoretical calculation data, performed for the crystal and cluster models of [Pb(S2CNEt2)2]∙½C2I4, revealed the non-covalent nature of the Pb⋯S TeB (-5.41 and -7.78 kcal/mol) and I⋯S HaB (-7.26 and -11.37 kcal/mol) interactions and indicate that in the co-crystal these non-covalent forces are similar in energy.

Copper Hydride-Catalyzed Enantioselective Olefin Hydromethylation.

The enantioselective installation of a methyl group onto a small molecule can result in the significant modification of its biological properties. While hydroalkylation of olefins represents an attractive approach to introduce alkyl substituents, asymmetric hydromethylation protocols are often hampered by the incompatibility of highly reactive methylating reagents and a lack of general applicability. Herein, we report an asymmetric olefin hydromethylation protocol enabled by CuH catalysis. This approach leverages methyl tosylate as a methyl source compatible with the reducing base-containing reaction environment, while a catalytic amount of iodide ion transforms the methyl tosylate in situ into the active reactant, methyl iodide, to promote the hydromethylation. This method tolerates a wide range of functional groups, heterocycles, and pharmaceutically relevant frameworks. Density functional theory studies suggest that after the stereoselective hydrocupration, the methylation step is stereoretentive, taking place through an SN2-type oxidative addition mechanism with methyl iodide followed by a reductive elimination.

A Comparative Study on Alvogyl and a Mixture of Black Seed Oil and Powder for Alveolar Osteitis: A Randomized Double-Blind Controlled Clinical Trial.

Introduction: Alveolar osteitis (AO) is the most common complication faced by exodontia patients and is usually seen 24-74 hours after tooth extraction, heralded by severe throbbing pain. Nigella sativa is commonly known as black seed known to have anti-inflammatory and antibacterial properties along with other reparative properties that enhance bone formation. This study aimed to evaluate and compare the effects of Alvogyl and a mixture of Nigella sativa powder and oil in the treatment of dry sockets. Materials and Methods: Sixty patients above the age of 18 and below 70 years, from both genders, who underwent extraction of teeth and were clinically diagnosed with a dry socket at the clinic of the College of Dentistry, Jouf University, Saudi Arabia, were included in this study. Pain scores were assessed after placement of the dressing at the following intervals: 5 minutes, 30 minutes, 60 minutes, 2nd day, 4th day, and 7th day. Patients were randomly allocated to three groups, namely, Group 1 (Alvogyl), Group 2 (mixture of Nigella sativa's powder and oil), and Group 3 (control). Pain relief and healing of the socket were compared between the three groups. The collected data were subjected to statistical analysis through Spearman's correlation test, independent t-test, ANOVA, and post hoc test. Results: A mixture of Nigella sativa powder and oil showed a statistically significant difference in relieving pain compared to the Alvogyl group. A mixture of Nigella sativa's powder and oil required fewer dressings when compared to the Alvogyl group. Conclusion: A mixture of Nigella sativa powder and oil is the more efficacious dressing material for the management of dry sockets compared to Alvogyl. It provides immediate and complete pain relief and fewer numbers of repeated visits.

Single-Micelle and Single-Zinc-Particle Imaging Provides Insights into the Physical Processes Underpinning Organozinc Reactions in Water.

Micelles on the surfaces of individual metallic zinc particles are imaged by fluorescence microscopy with sensitivity up to single micelles. These micelles are made fluorescent to enable imaging, through the incorporation of boron dipyrromethene fluorophores as representative organic molecular "cargo". Highlighting an advantage of this in situ and sensitive fluorescence technique, the same micelles are not visible by ex situ scanning electron microscopy/energy dispersive X-ray spectroscopy analysis. Examination of micellar solutions with zinc reveals an aging process: micelles do not immediately adhere to the zinc surfaces upon mixing but rather build up over time. Furthermore, at longer times, smaller zinc particles become fully encased in micelle "shells". Once adhered, micelles remain in the local regions of the zinc surface for the duration of the imaging experiments (>2 h). Single micelles are imaged in solution, and their molecular contents are characterized. Two-color fluorescence crossover experiments show that micelles adhered to the surface of the zinc exchange molecular contents with micelles in solution, achieving molecular exchange equilibrium in ∼2.5 h. Unique (non-ensemble averaged) exchange kinetics are displayed by micelles at different locations on the zinc surface, consistent with exchange kinetics of single micelles or small local clusters of micelles. The aging of the micellar solutions and the rate of exchange while on the surface of the zinc suggest that micelle mass transport processes may contribute to overall reaction barriers in sustainable organozinc cross-coupling reactions in micellar water. The observed aging of the system suggests routes for improvement of preparative, bench-scale synthetic reactions involving micellar preparations of organozinc compounds.

Chemoselective and Diastereoselective Synthesis of C-Aryl Nucleoside Analogues by Nickel-Catalyzed Cross-Coupling of Furanosyl Acetates with Aryl Iodides.

Canonical nucleosides are vulnerable to enzymatic and chemical degradation, yet their stable mimics-C-aryl nucleosides-have demonstrated potential utility in medicinal chemistry, chemical biology, and synthetic biology, although current synthetic methods remain limited in terms of scope and selectivity. Herein, we report a cross-electrophile coupling to prepare C-aryl nucleoside analogues from readily available furanosyl acetates and aryl iodides. This nickel-catalyzed modular approach is characterized by mild reaction conditions, broad substrate scope, excellent ß-selectivity, and high functional-group compatibility. The exclusive chemoselectivity with respect to the aryl iodide enables efficient preparation of a variety of C-aryl halide furanosides suitable for various downstream transformations. The practicality of this transformation is demonstrated through the synthesis of a potent analogue of a naturally occurring NF-κB activator.

Efficacy of an iodoform-based filling material for pulpectomy of primary teeth: A 24-month non-inferiority randomized clinical trial.

AIM: The aim of this non-inferiority randomized clinical trial was to compare the efficacy of an iodoform-based paste (Guedes-Pinto -(GP)) as a filling material in pulpectomies of primary teeth, and a standard material composed by calcium hydroxide and iodoform (CaOH/Iodof paste; Vitapex® ). DESIGN: A total of 104 teeth from 61 children (3-8 years old) were randomly allocated to two groups according to filling materials. Children were followed up for 24 months. The primary endpoint was the treatment success rate evaluated through clinical and radiographic examinations at follow-up, and the secondary outcome was the analysis of the canal filling quality. Differences in the proportion of treatment success was calculated based on 95% confidence intervals (95% CI) and with the Miettinen and Nurminen method in the intention-to-treat population, considering a -20% of the non-inferiority limit. RESULTS: From 104 randomized teeth, 102 were followed up after 24 months (attrition rate of 1.9%). The success rate of teeth treated with the GP paste was 86.8% (95% CI: 69.9-94.9) and 78.4% (95% CI: 61.8-89.1) with the CaOH/Iodof paste. Consequently, a non-inferiority of the GP paste was observed when compared to the CaOH/Iodof paste (P < .001). CONCLUSION: The GP paste has a non-inferior success rate than the CaOH/Iodof paste used as filling material for pulpectomy in primary teeth.

Targeted knockout of the gene OsHOL1 removes methyl iodide emissions from rice plants.

Iodine deficiency represents a public health problem worldwide. To increase the amount of iodine in the diet, biofortification strategies of plants have been tried. They rely on the exogenous administration of iodine to increase its absorption and accumulation. However, iodine is not stable in plants and can be volatilized as methyl iodide through the action of specific methyltransferases encoded by the HARMLESS TO OZONE LAYER (HOL) genes. The release of methyl iodide in the atmosphere represents a threat for the environment due to its ozone depletion potential. Rice paddies are among the strongest producers of methyl iodide. Thus, the agronomic approach of iodine biofortification is not appropriate for this crop, leading to further increases of iodine emissions. In this work, we used the genome editing CRISPR/Cas9 technology to knockout the rice HOL genes and investigate their function. OsHOL1 resulted a major player in methyl iodide production, since its knockout abolished the process. Moreover, its overexpression reinforced it. Conversely, knockout of OsHOL2 did not produce effects. Our experiments helped elucidating the function of the rice HOL genes, providing tools to develop new rice varieties with reduced iodine emissions and thus more suitable for biofortification programs without further impacting on the environment.