A comparative study of the application of three digital imaging techniques to assess the thickness of the palatal mucosa of the maxillary anterior teeth.

BACKGROUND: This study highlights the need for precise and efficient methods to measure palatal mucosal thickness in the maxillary anterior teeth, particularly for soft tissue augmentation in the aesthetic zone. The research evaluates three digital imaging techniques, suggesting that Cone Beam Computed Tomography (CBCT) combined with intraoral scanners (IOS) is a promising approach for reliable clinical assessment. METHODS: Ten volunteers with healthy periodontium were selected, and three methods were employed: CBCT-based indirect gingival imaging, modified soft tissue CBCT (ST-CBCT), and CBCT combined with IOS. Measurements of palatal mucosal thickness were taken at multiple points along the palatal gingival margin. Statistical analysis included Bland-Altman plots for method agreement and intraclass Correlation Coefficient (ICC) analysis for reliability. All measurements were standardized, repeated for consistency, and accurate to 0.01 mm to ensure reliability. RESULTS: The Bland-Altman plots showed that less than 5% of the points for palatal mucosal thickness differences measured by the gingival indirect radiographic method, modified ST-CBCT, and CBCT combined with IOS were located outside the 95% limits of agreement (LoA). The mean value of the differences was within 0.2 mm, indicating good clinical agreement among the three methods. The inter- and intra-study ICC values for palatal mucosal thickness measurements of the maxillary anterior teeth using the three CBCT methods were greater than 0.75 (P < 0.001), demonstrating reproducibility. CONCLUSIONS: Based on the evaluation of three digital imaging techniques, this study indicates that the combination of CBCT with IOS is a feasible method for measuring palatal mucosal thickness in the maxillary anterior teeth and demonstrates good reproducibility.

Is SDF better than the SMART (silver modified atraumatic restorative technique) in the management of molar incisor hypomineralisation molars with initial caries?

DESIGN: A prospective, randomized, split-mouth clinical study by the two previously trained and calibrated pediatric dentists without blinding operators and patients due to different protocols in both treatment groups. An SDF + potassium iodide (KI) and SDF + KI + glass ionmer cement (GIC) on International Caries Detection and Assessment System (ICDAS) 1/2 molar was received by each patient on either side of mouth. The local Ethics Committee approved this study. DATA SOURCE: Sample size calculation was not performed due to the lack of published studies on the longevity of SMART sealant on MIH-affected molars and the absence of research on the apparent difference between the effectiveness of SMART and SDF treatments in preventing further caries and sensitivity. STUDY SELECTION: These were children between the ages of 6 years to 13 years, who visited the Pediatric Dentistry Clinic at XX University School of Dentistry for routine exams and treatment between July 2019 to May 2020. They were in good health and had at least two fully erupted permanent first molars with MIH as per the European Academy of Pediatric Dentistry, ICDAS code 1/2. This study recorded 12 months of treatment outcomes on hypomineralised molars of 48 children with a follow-up of three years. Children were excluded with specific syndromes associated with enamel malformation, lack of cooperation, ongoing orthodontic treatment, and teeth with ICDAS 3/4/5/6 lesions, existing restorations, fluorosis, or pulpal symptoms. DATA ANALYSIS: Mann-Whitney U Test was used to assess differences between independent groups (SDF and SMART) and the Friedman Test between dependent groups at different time points. Kaplan-Meier analysis to evaluate the cumulative survival of SMART sealants and survival of caries-free hypomineralised molars in both groups. Chi-Square test was used to compare the success percentages of the SDF and SMART groups. To assess the changes in success percentages at three different time intervals for the caries preventive effect of SDF and SMART, and to evaluate the retention percentages for the SMART group. McNemar's test with a Bonferroni correction was used for significant differences. Cohen's kappa test indicated that the inter-examiner reliability determining the presence of MIH was 0.87. The intra-examiner reliability for US Public Health Service (USPHS)-Modified criteria was 0.90. The statistical significance level was set at p < 0.05 for all statistical analyses. RESULTS: At 12, 24 and 36 months the caries preventive effect was 100%, 67.9%, and 65.4% for SDF + KI-treated teeth; and 100%, 97.6%, and 94.7% for SMART (SDF + KI + GIC) respectively. During the recall period, there was no substantial difference in hypersensitivity scores between the groups. There was no hypersensitivity in teeth at 18 months and beyond. Compared to the baseline Schiff Cold Air Sensitivity Scale (SCASS) score 26 molar with initial hypersensitivity to hypomineralisation had a massive reduction at evaluation periods. The mean survival probabilities for the caries-preventive effect were considerably lower in SDF + KI-treated teeth (31.01 months) than in SMART-treated teeth (35.61 months) (p < 0.001). CONCLUSION: Considering the limitation of the study, both SMART (SDF + KI + GIC) sealants and 6-monthly application of SDF + KI, provided similar and substantial levels of desensitisation on the permanent MIH molars. When used as a sealing material on non-cavitated permanent MIH molars, the clinical retention rate for SMART was 88.7%, 73.1%, and 66.6% at 1, 2, and 3 years respectively. The caries preventive effect of SMART (SDF + KI + GIC) sealants was superior to SDF + KI application in hypomineralised teeth, however, a long-term monitoring and review is essential due to the gradual decrease in retention of SMART sealants.

Morphology and root canal configuration of maxillary lateral incisors: a systematic review and meta-analysis.

The purpose of this study was to explore maxillary lateral incisors (MxLI) intern morphology by analyzing existing literature. We searched five electronical databases (Cochrane, Embase, LILACS, Scopus, MEDLINE via PubMed) using keywords and predefined search terms. Additional studies were identified by cross-referencing and reviewing bibliographies of relevant articles. From 92 initial studies, 27 duplicates were removed, and 65 records screened. After full-text review and hand searching were 19 studies included. The most reported root canal configurations (RCC) of MxLI were Vertucci (Ve) I (1-1-1/1; 78.1-100%), Ve II (2-2-1/1; 0.2-5%), Ve III (1-2-1/1; 0.1-14.6%), Ve IV (2-2-2/2; 0.5%), and Ve V (1-1-2/2; 0.5-4.9%). A meta-analysis of six studies from Europe and Asia indicated sex-differentiated patterns in RCC prevalence: higher occurrences of Ve II (2-2-1/1; OR [95%CI] = 1.19 [0.51, 2.73]), Ve III (1-2-1/1; (OR [95%CI] = 1.72 [0.61, 4.85]), and Ve V (1-1-2/2; (OR [95%CI] = 2.95 [1.02, 8.55]) configurations were noted in males, whereas females predominantly exhibited Ve I (1-1-1/1; [95%CI] = 0.99 [0.97, 1.02]), and Ve IV (2-2-2/2; (OR [95%CI] = 0.11 [0.01, 2.02]). Examination methods varied, with cone beam computed tomography (CBCT) being most commonly (n = 11), followed by staining & clearing (n = 5), and radiographic analysis (n = 1). The predominant RCC in MxLI is type Vertucci I. CBCT is the most common method for assessing the morphology of root canals. However, up to 20% of cases may present with complex and sex-specific patterns, highlighting the need for clinicians to be aware of these differences to prevent complications during endodontic treatments.

Effect of interproximal enamel reduction on interradicular bone volume in clear aligner therapy: a three-dimensional cone-beam computed tomography study.

OBJECTIVES: To assess the effect of inter-proximal enamel reduction (IPR) on interradicular bone volume and incisal inclination in patients undergoing clear aligner therapy (CAT). MATERIALS AND METHODS: The study sample consisted of 60 cases which underwent orthodontic CAT, in a private clinic in Dammam, KSA. A total of 120 CBCT scans (60 pre-treatment and 60 post- treatment) were measured using the CS 3D Imaging software to examine bone volume (using height, width, and depth of the interproximal area) and incisal inclination. The corresponding ClinCheck models were collected to determine the amount and locations of interproximal reduction performed. Little's Irregularity Index values were measured using OrthoCAD software. Paired sample t-test was used to address the measurements of bone height, width, depth, bone volume, and inclination of upper and lower incisors before and after IPR. RESULTS: IPR did not affect the upper or lower bone volume except at LR3-2 and UL 2 - 1 where a significant difference between the bone volume with and without IPR was detected (p = 0.02 and p = 0.04 respectively). Upper and lower incisor inclination showed a statistically significant decrease after IPR. There was no correlation between IPR and bone volume difference between upper and lower teeth except at LR3-2 and UL 2 - 1. CONCLUSIONS: IPR had no significant effect on inter-radicular bone volume except at areas of lower right canine-lateral and at areas of upper left central-lateral. There was a positive correlation between the amount of IPR and incisal inclination. CLINICAL RELEVANCE: The current study findings suggest that while IPR has a minimal and localized effect on bone volume in certain areas, it plays a role in adjusting incisal inclination, highlighting its significance in the careful planning of orthodontic treatment using clear aligners.

Challenges of Using Scoring Systems for the Assessment of Molar Incisor Hypomineralisation.

The dental professional is exposed to complex challenges daily, posed by molar incisor hypomineralisation (MIH). These range from understanding its etiology through to determining the most effective strategies for clinical management of the problem. Beyond any doubt, the choice of the diagnostic scoring system to be used for recording the condition is included among these challenges. To a certain degree, this is understandable since the development of specific diagnostic tools for recording the occurrence of MIH takes place parallel to the ongoing discoveries about the problem. Therefore, the aim of this chapter is to present different MIH scoring systems that have previously been proposed in the literature for detecting MIH and discuss their applications, advantages, and limitations.

Prevalence of Enamel Hypomineralisation/Molar Incisor Hypomineralisation: A Scoping Review.

The aim of this scoping review was to provide an up-to-date assessment of the prevalence of enamel hypomineralisation (EH) and, in particular, molar incisor hypomineralisation (MIH). Epidemiological studies published from 2010 to 2023 were analyzed. After screening the primary literature, a total of 139 studies were included. According to the available epidemiological trials of children and adolescents from Europe (n = 39), the average prevalence of EH/MIH was 16.74%. The data from Asian studies (n = 50) showed an average prevalence of 15.6%. For South America (n = 33 studies), the mean prevalence of EH/MIH was 16.7%. The mean prevalence rates for North America (N = 9 studies), Africa (N = 6), and Australia (N = 2) were 25.9%, 11.4%, and 16.8%, respectively. Taken together, these data indicate that EH/MIH is a prevalent condition worldwide. With the aim of standardizing and generating comparable prevalence data, the use of the currently established criteria by the European Academy of Paediatric Dentistry (EAPD) for the detection of EH/MIH may support consistent reporting in epidemiological trials. However, other EH/MIH indices and phenotypes do exist. As the determination of EH/MIH prevalence depends on the correct use of index teeth, meticulous attention must be given to their correct application.

Understanding the Enamel Disintegration and Posteruptive Breakdown of Demarcated Opacities on Molar Incisor Hypomineralisation.

This review aims to present scientific knowledge regarding the demarcated opacities of molar incisor hypomineralisation (MIH) and factors that clarify the occurrence of posteruptive enamel breakdown. The demarcated opacities have distinct boundaries with the adjacent nonaffected enamel and may vary in color among white, creamy, yellow, and brownish. The hypomineralised enamel is more porous and less organized than the nonaffected enamel. As a result of the reduced mineral content and higher protein content, the hypomineralised enamel shows a progressive reduction in its mechanical properties according to the opacity feature. Chemically, the protein content of MIH opacities is abnormally high, mainly composed by albumin, which is a serum protein usually not found in mature enamel. The highest protein content is seen in brown opacities, followed by yellow and white opacities, both with higher protein content than nonaffected enamel. The fact that the hypomineralised enamel is more fragile than the nonaffected enamel is supported not only by laboratorial findings but also by clinical prospective studies that observed an aggravation of MIH over time, as well as the correlation between the color of the demarcated opacities and the risk of posteruptive enamel breakdown. A better understanding about the microstructure of the hypomineralised enamel has relevant implications for the clinical approach of the condition. In the clinic, besides a comprehensive assessment of anamnesis and clinical data, it is advisable to record the color and the location of the opacities by tooth surface in order to support the treatment decisions and estimate a prognosis for MIH patients.

Re-Establishing the Esthetics of Incisors in Patients with Molar Incisor Hypomineralisation.

The awareness of molar incisor hypomineralisation (MIH) has led to its increased clinical detection, consequently drawing more attention to its associated complications. This text offers an overview of the esthetic management of anterior teeth affected by MIH, a condition characterized by enamel defects that present significant cosmetic challenges. The focus is on the clinical presentation of MIH characteristics, considering the depth of lesions and the clinical aspects, and the treatment protocols available, despite a lack of extensive scientific evidence. To the best of the current scientific knowledge, the text evaluates the potential of minimally invasive procedures, as well as the use of traditional composite resin techniques and their possible combinations, highlighting the critical role of esthetic considerations for the impacted anterior teeth. The chapter is augmented with five illustrative clinical cases that display the practical application of these treatment approaches. These examples articulate the clinical decision-making process and personalized restorative strategies, aiming to balance function with enhanced esthetic results. The described cases act as a roadmap for clinicians tackling the complexities of MIH treatment in the context of limited empirical evidence, providing insights into achieving both satisfactory and esthetically pleasing outcomes for patients suffering from this condition.

Impact of Molar Incisor Hypomineralisation on Quality of Life.

Oral health-related quality of life (OHRQoL) is a multifaceted concept that surpasses an exclusively clinical perception and includes functional, social, emotional, and environmental issues. The measure of OHRQoL represents a holistic approach for research and clinical practice. Negative impacts of oral conditions on OHRQoL in childhood can reflect on health development, especially in a life stage marked by social and cognitive maturation. Therefore, such problems can impact negatively on the daily lives of the individuals and their families. Individuals with molar incisor hypomineralisation (MIH) experience more frequent posteruptive breakdown, an elevated risk of tooth decay, filling failures, the need for recurrent dental treatment, and a higher prevalence of dental hypersensitivity. Children with severe MIH may struggle with everyday activities, such as brushing their teeth, speaking, smiling, chewing, and consuming hot or cold foods. MIH-affected incisors may exhibit opacities that can impact the aesthetics of their smiles. This condition may discourage children from smiling and can indirectly affect their parents as well. The management modalities are focused on solving functional, aesthetic, and hypersensitivity problems and to evaluate OHRQoL values before and after therapies. Therefore, this chapter aims to discuss how MIH affects the OHRQoL of children and the questionnaires that can be used to evaluate that impact.

Clinical Characteristics and Differential Diagnosis of Hypomineralised Second Primary Molars and Molar Incisor Hypomineralisation.

Molar incisor hypomineralisation (MIH) and hypomineralised second primary molars (HSPMs) are commonly seen dental developmental problems with a mean prevalence of around 14% and 9%, respectively, but with a large variability in the reported prevalences. From the dental development, we know that the enamel mineralisation of the second primary molar is taking place between the 19th week of pregnancy until 1 year of age. For the first permanent molars (FPMs) and incisors, the enamel mineralisation is taking place between birth until the age of 3-5. When there is a disturbance during this period, HSPM and/or MIH can occur. There is an overlap in the development of the second primary molars and the FPMs and incisors; the period between birth and the first birthday of the child. A disturbance in this period could cause both HSPM and MIH. There is a relation found in the occurrence of HSPM and MIH. Diagnosing HSPM and MIH can be challenging. All teeth present in the mouth need to be examined. The use of the European Association of Paediatric Dentistry scoring criteria is a good help. In these criteria also, the most common differential diagnoses are included.

Cone-Beam Computed Tomographic Study of the Internal Anatomy of Lower Anterior Teeth.

Background A thorough knowledge of the root and canal morphology and their possible variations are essential for successful endodontic treatment. Methods like staining and clearing techniques, cross sectional method can provide precise information on root canal systems, however, these methods are invasive. Cone-beam computed tomography (CBCT) is the 3-dimensional scans of the maxillofacial skeleton that best visualizes canal morphology and helps in identifying additional canals and roots in vivo. Objective To investigate the root canal configuration of mandibular anterior teeth using Conebeam computed tomography. Method A total of 2910 CBCT images, comprising 970 central incisors, lateral incisors, and canines each from 485 patients were assessed. The following assessments were made: (1) The number of roots and root canals (2) Canal configuration according to Vertucci's classification (3) Bilateral occurrences for variations. Also, the gender and age of patients were noted. Result The study revealed mandibular anterior teeth predominantly had 1 root with Type I (79.79%, 77.11%, 91.34%) canal configuration followed by type III (20.2%, 22.67%, 5.15%) in central, lateral and canine respectively. Almost 90% incisors had symmetry in the canal configurations. No statistical correlation was found between the gender and root canal configurations. Type III canal configurations in canines were present more in elder age group. Conclusion Clinicians must be aware that each tooth may display a different number of roots and types of canal configurations. During endodontic treatment, presuming lower anterior teeth with single root and single canal may lead to missed canals and consequently, treatment failure.

Craniofacial features and incisor position design of esthetics population after orthodontic treatment.

OBJECTIVES: This study aims to provide craniofacial features and incisor position prediction models among esthetics population after orthodontic treatment. METHODS: A total of 338 patients with esthetic profiles were selected from 1 055 post-orthodontic adults based on inclusion and exclusion criteria and scored by five dental students. Mean values of cephalometric measurement were demonstrated with gender and sagittal skeletal pattern (ANB) differences assessed by generalized estimating equation. Correlations among age, skeletal, and soft tissue variables in different genders were determined. Multivariate analysis was used to assess the influence of skeletal and soft tissue variables on orthodontic incisor position. RESULTS: Within the esthetic cohort after orthodontic treatment, gender differences existed in cranial and mandibular length, mandibular rotation, protrusion of pogonion, inclination of maxillary incisors, upper lip thickness, lower 1/3 face height, and nose protrusion. However, in class Ⅰ malocclusion, the development of the chin showed no significance, whereas the protrusion of the lower lip significantly differed between genders, with less protrusion in males. In males, the protrusion of lip and chin varied among groups, with thinner basic upper lip thickness of class Ⅱ than class Ⅰ and greater lower lip height of class Ⅲ than class Ⅰ. In females, the protrusion and height of the upper lip and chin varied in groups, with thicker basic upper lip thickness of class Ⅲ than class Ⅰ. Upper lip thickness, female basic upper lip thickness, and female lower lip height were correlated with age. The protrusion of the upper lip was mainly correlated with posterior cranial base, mandibular body length, ANB in male and SNA, ANB, sagittal maxillary length, mandibular rotation, and protrusion of pogonion in female. The protrusion of the lower lip in males was mainly correlated with ramus height, mandibular rotation, protrusion of pogonion in male and ANB, mandibular rotation, and protrusion of pogonion in females. After employing skeletal variables to fit dental parameters, optimal results were achieved in male IMPA (adjusted R2=0.712) and female G Vert-U1 (adjusted R2=0.795). After employing skeletal and soft tissue variables simultaneously, optimal results were achieved in male and female G Vert-U1, which was mainly influenced by the protrusion of the chin and nasal base in males (adjusted R2=0.836) and the protrusion of the nasal base as well as ANB in females (adjusted R2=0.842). CONCLUSIONS: This study demonstrated the craniofacial features of esthetics population after orthodontic treatment and revealed the correlation of gender, age, skeleton, and soft tissues to provide reliable prediction models for aesthetic orthodontic incisor position.

Simultaneous labial and lingual augmented corticotomy assisted presurgical orthodontics in class III patients: the morphological aspects of the mandibular anterior ridge with cone-beam computed tomography.

OBJECTIVES: This study aims to investigate the changes in alveolar bone following the simultaneous performance of labial and lingual augmented corticotomy (LLAC) in patients with insufficient alveolar bone thickness on both the labial and lingual sides of the mandibular anterior teeth during presurgical orthodontic treatment. MATERIALS AND METHODS: Thirth-five surgical patients with skeletal Class III malocclusion were included: 19 (LLAC group) accepted LLAC surgery during presurgical orthodontic treatment, and 16 (non-surgery group, NS) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T0) and at the completion of presurgical orthodontic treatment (T1). The amount of vertical alveolar bone and contour area of the alveolar bone in the labial and lingual sides of mandibular incisors were measured. RESULTS: After presurgical orthodontic treatment, the contour area of the alveolar bone at each level on the lingual side and alveolar bone level on both sides decreased significantly in the NS group (P < 0.001). However, the labial and lingual bone contour area at each level and bone level increased significantly in the LLAC group (P < 0.001). The bone formation rate in the lingual apical region was the highest, significantly different from other sites (P < 0.001). CONCLUSIONS: During presurgical orthodontic treatment, LLAC can significantly increase the contour area of the labio-lingual alveolar bone in the mandibular anterior teeth to facilitate safe and effective orthodontic decompensation in skeletal Class III patients. CLINICAL RELEVANCE: This surgery has positive clinical significance in patients lacking bone thickness (< 0.5 mm) in the labial and lingual sides of the lower incisors.

Analysis of factors affecting bone volume changes after immediate implantation in the maxillary central incisor.

OBJECTIVES: This study aimed to evaluate the clinical outcomes of immediate implantation of single maxillary central incisor and explore factors affecting post-implant bone volume. METHODS: Clinical data and imaging records from pre-surgery, the day of surgery, and 6 months post-surgery of 100 patients (100 implants) with non-salvageable maxillary central incisors who underwent immediate implantation were collected. Bone thickness at the cervical, middle, and apical regions of the implant's labial and palatal sides were measured immediately post-surgery and at 6 months, and bone volume changes were observed. A regression analysis model was used to assess predictive factors for labial and palatal bone plate thickness. RESULTS: At 6 months post-surgery, the labial bone thicknesses at the cervical, middle, and apical regions were 2.35, 2.29, and 3.28 mm, respectively, and those of the palatal side were 0.00, 2.40, and 6.05 mm, respectively. The cervical region had the highest alveolar crest collapse rates, with 32.87% on the labial side and 62.20% on the palatal side. The regression model indicated that factors influencing the thickness of bone at the cervical labial side of the implant included initial bone thickness, the implant center to adjacent tooth center angle, implant diameter, and the type of implant closure (P<0.05). The initial bone thickness on the palatal side was the sole predictor for bone thickness on the palatal side (P<0.05). CONCLUSIONS: Immediate implantation of single maxillary central incisors yields effective clinical results. The thickness of new bone around the implant is influenced by multiple factors. A comprehensive consideration of these factors in the planning of immediate implantation is necessary to achieve optimal therapeutic outcomes.

Palatal groove associated with periodontal lesions: a systematic review illustrated by a decisional tree for management.

BACKGROUND: Palatal groove represents a relatively uncommon developmental root anomaly, usually found on the palatal aspect of maxillary incisors. While its origin is controversial, its presence predisposes to severe periodontal defects. AIM: This study aimed to provide a systematic review of the literature focusing on the varied diagnostic techniques and treatment modalities for periodontal lesions arising from the presence of palatal groove. Based on the existing evidence and knowledge, the study also provides a comprehensive decisional tree, guiding clinicians in the challenging decision-making process face to a palatal groove. METHODS: The literature search was conducted on Medline and Cochrane databases by two independent reviewers, who also performed the screening and selection process, looking for English written articles reporting on diagnosis and management (all treatment approaches) of periodontal lesion(s) associated with a palatal groove. Based on this literature, a comprehensive decisional tree, including a standardized palatal groove evaluation and tailored treatment approaches, is proposed. Moreover, a clinical case is described to demonstrate the practical application of the developed decisional tree. RESULTS: Over a total of 451 articles initially identified, 34 were selected, describing 40 patients with 40 periodontal lesions associated with palatal grooves. The case report illustrates a deep, large, circumferential intra-bony defect on the palatal side of the tooth #22 associated with a shallow, moderately long palatal groove in an 18-year-old male patient. Following reevaluation, a single flap surgery was deemed necessary, combined with a regenerative procedure. At 2 years post-treatment, the tooth #22 is healthy, in a functional and esthetic position. The decision-making process, based on local and systemic patient's conditions, should allow an early and precise diagnosis to prevent further complications and undertake an adequate treatment. CONCLUSION: Palatal grooves are relatively rare; however, they are frequently associated with severe periodontal defects. The identification, diagnosis, prompt, and tailored management of the associated lesion is essential to mitigate potential periodontal and endodontic complications related to the presence of palatal groove. SYSTEMATIC REVIEW REGISTRATION: [ https://www.crd.york.ac.uk/prospero/ ], identifier [C CRD42022363194].

Root canal configuration of human permanent anterior teeth: A cross-sectional study using cone-beam computed tomography in the Pakistani population.

Objectives: To analyse and document internal root morphological variations in permanent anterior teeth using conebeam computed tomography. METHODS: The cross-sectional, retrospective study was conducted from January 21 to June 19, 2021, at Jinnah Magnetic Resonance Imaging and Body Scan, and comprised data from July to December 2020 related to all the patients who had been referred to the centre for dental cone-beam computed tomography scan. The scans were evaluated at the Radiology Department of the School of Dentistry at Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad, Pakistan. The morphology of the roots and root canals in all permanent anterior teeth was examined. Root canal configuration was categorised using Vertucci's classification. Data was analysed using SPSS 20. RESULTS: Of the 211 patients, 116(55%) were females and 95(45%) were males. The overall mean age was 39.9±1.02 years (range: 15-65 years). All the permanent anterior teeth exhibited a single root, with the exception 2(0.9%) mandibular right and 4(1.9%) left canines which had double roots. Type I root canals were observed in all 211 (100%) maxillary right central incisors, maxillary left central incisors and maxillary left canines. Among maxillary right canines, 208(98.6%) had type-I root canals, and the corresponding value for maxillary right lateral incisors was 209(99.1%), and for maxillary left lateral incisors, the value was 210(99.5%). Root canal polymorphism had no significant association with gender (p>0.05). CONCLUSIONS: The presence of type-I root canal was common in permanent anterior teeth, and there was significant association of root canal polymorphism with gender.

Lower incisor position in skeletal Class III malocclusion patients: a comparative study of orthodontic camouflage and orthognathic surgery.

OBJECTIVES: To determine the difference between orthodontic camouflage and orthodontic-orthognathic surgery using the traditional cephalometric measurement IMPA and the newly proposed IA/PAMD, the angle between the long axis of the lower incisor (IA) and the principal axis of the mandibular alveolus (PAMD). MATERIALS AND METHODS: This study included 40 cases each in the orthodontic camouflage group (OG) and orthodontic-orthognathic surgery group (SG). The differences between the IMPA and IA/PAMD before and after treatment were compared between the two groups. T0 lateral cephalometric images of the 10 cases with the highest and lowest increase in the IA/PAMD were analyzed to identify characteristics associated with a higher risk of overdecompensation of the lower incisors during presurgical orthodontic treatment. RESULTS: Both the OG and SG showed a significant improvement in hard- and soft-tissue measurements. However, in the OG, there was significant lingual inclination of the lower incisor but only a small change in the IA/PAMD. In the surgical group, the IMPA was close to 90° after treatment, but the IA/PAMD significantly increased. CONCLUSIONS: In orthodontic camouflage, the lower anterior teeth were significantly moved lingually with a better root-bone relationship. However, this relationship deteriorated in some surgical patients. Therefore, it is important to conduct cephalometric or cone-beam computed tomography examinations during preoperative orthodontics to identify and prevent possible periodontal risks.

Evaluation of dentoalveolar changes following maxillary incisor intrusion with one vs two anterior miniscrews in subjects with gummy smile: a randomized clinical trial.

OBJECTIVES: To examine dentoalveolar changes following intrusion of maxillary incisors with one or two anterior miniscrews in subjects with gummy smile and deep bite. MATERIALS AND METHODS: Forty-three subjects were selected and divided into two groups: group I (22 subjects: 15 women, 7 men; mean age 30 ± 10 years) received one miniscrew between the upper central incisors, and group II (21 subjects: 16 women, 5 men; mean age 30 ± 10 years) received two miniscrews between the canines and lateral incisors. Dentoalveolar parameters, including amount of intrusion, root resorption, incisor inclination, alveolar bone thickness, and buccal alveolar crest height (cementoenamel junction to labial alveolar crest), were evaluated using cone-beam computed tomography scans obtained before and after intrusion. The intergroup comparison was analyzed using a paired t-test and unpaired t-test to determine significant changes within and between groups. RESULTS: The amount of intrusion was significantly greater in group II than in group I (P < .05). No statistically significant differences were found between groups I and II for changes in incisor inclination, labial bone thickness, and buccal alveolar crest height (P > .05). CONCLUSIONS: Maxillary central and lateral incisor intrusion was significantly greater in subjects treated with two miniscrews. Root resorption of the maxillary central incisors was notably greater in subjects with one miniscrew, while maxillary lateral incisor resorption was greater in subjects treated with two miniscrews.

Influence of Invisalign precision bite ramp utilization on deep bite correction and root length in adults.

OBJECTIVES: To assess the influence of Invisalign precision bite ramp use on skeletal deep overbite correction and root length and volume of maxillary anterior teeth. MATERIALS AND METHODS: This was a retrospective study of 60 adults with skeletal deep overbite. Patients were divided into three groups: Invisalign (Align Technology, San Jose, Calif) with precision bite ramps (Invisalign with Bite Ramps [IBR] = 12), Invisalign with no bite ramps (INBR = 22), and full-fixed appliances (FFA = 26). Cone beam computed tomography records at T1 (pretreatment) and T2 (posttreatment) were used to measure eight skeletal, nine dental, and three soft-tissue cephalometric variables. Maxillary anterior teeth root length (mm), root volume (mm3), and percent root volume loss between T1 and T2 (%) were also recorded. RESULTS: Significant changes from T1 to T2 among the three groups were seen in ANB(o), lower face height (%), ODI (overbite depth indicator) (o), and U1-SN (o). Reduction in root length was significantly less (P < .001) in the INBR and IBR groups compared to the FFA group. Reduction in root volume and percent volume loss were significantly higher in the INBR group compared to the IBR group (P < .001), but the difference between the two Invisalign groups and the FFA group was not significant. CONCLUSIONS: Skeletal deep overbite correction using Invisalign with or without bite ramps is comparable to FFA. Reduction in root length was significantly less with Invisalign compared to FFA. Bite ramps influenced root volume and volume loss but not root length.