Influence of tube current and metal artifact reduction on the diagnosis of external cervical resorption in teeth adjacent to a dental implant in CBCT: an ex-vivo study.

OBJECTIVES: This ex-vivo study aimed to assess the influence of tube current (mA) and metal artifact reduction (MAR) on the diagnosis of early external cervical resorption (EECR) in cone-beam computed tomography (CBCT) in the presence of an adjacent dental implant. MATERIALS AND METHODS: Twenty-three single-rooted teeth were sectioned longitudinally and EECR was induced using a spherical drill and 5% nitric acid in 10 teeth. Each tooth was positioned in the socket of the lower right canine of a dry human mandible and CBCT scans were acquired using 90 kVp, voxel of 0.085 mm, field of view of 5 x 5 cm, and varying tube current (4, 8 or 12 mA), MAR (enabled or disabled) and implant conditions (with a zirconia implant in the socket of the lower right first premolar or without). Five oral radiologists evaluated the presence of EECR in a 5-point scale and the diagnostic values (area under the receiver operating characteristic curve - AUC, sensitivity, and specificity) were compared using multi-way Analysis of Variance (α = 0.05). Kappa test assessed intra-/inter-evaluator agreement. RESULTS: The tube current only influenced the AUC values in the presence of the implant and when MAR disabled; in this case, 8 mA showed lower values (p<0.007). MAR did not influence the diagnostic values (p>0.05). In general, the presence of an implant reduced the AUC values (p<0.0001); sensitivity values with 8 mA and MAR disabled, and specificity values with 4 mA and MAR enabled and 8 mA regardless MAR were also decreased (p<0.0001). CONCLUSIONS: Variations in tube current and MAR were unable to improve EECR detection, which was impaired by the presence of an adjacent implant. CLINICAL RELEVANCE: Increasing tube current or activating MAR tool does not improve EECR diagnosis, which is hampered by the artifacts generated by dental implants.

Injury Risk Estimation in Mandible-Related Surgical Procedures: A CBCT Study Based on Vital Interforaminal Anatomical Structures.

The mandibular interforaminal region has been considered safe for surgical procedures; nevertheless, the risk of injury to neurovascular structures, such as the mental foramen (MF) and its related structures (anterior loop [AL] and lingual foramina [LF]) should not be overlooked. The study aimed to evaluate the relative risk of injury to these structures during surgical procedures in the anterior region of the mandible based on cone-beam computed tomography (CBCT) scans. A retrospective cross-sectional and observational study was performed on 250 CBCTs from adults (18-69 years) with dentate jaws. Linear measurements of the MF, AL, and LF were evaluated to estimate the risk of injury to these structures during chin-related surgical procedures. The most frequent distance between the base of the mandible (BM) and MF was 8 mm (30.2%). In addition, 20.4% of the CTs had 6 mm from the vestibular cortical bone to the LF. The commonly found measurement from LF to the apex of the nearest tooth was 7 mm (24.0%); 64.2% of the CTs showed a 2-mm distance between the most distal point of the dental implant site to the most anterior point of the AL. Safety distances for genioplasty techniques (MF to mandible base > 6 mm, 96.6% [CI 95%, 95.0%-98.2%]) were observed. Considering the 5-mm cut-off point between the lower limit of a hypothetical bone graft and the chin, 65.4% (CI 95%, 58.9%-71.9%) of CTs were within this distance. Regarding the safety margin of 8 mm, 85.6% (CI 95%, 80.8%-90.4%) were up to this value. This study found safety margins for genioplasty and chin bone grafting surgical techniques that adopt a 5-mm cut-off point. Further similar studies assessing other surgical methods and employing larger samples from different geographical origins may contribute to this field of investigation.

Identification of the Incisive Branch of the Inferior Alveolar Nerve of Edentulous Mandibles Using Cone-Beam Computerized Tomography.

This study explored the average length of the incisive branch (IB) of the inferior alveolar nerve on cone-beam computerized tomography (CBCT) with regard to patient demographics in patients with edentulous mandibles. CBCT was used in a retrospective study of edentulous mandibles to assess the presence and anatomical variation for the IB. Three independent observers measured bilateral IB lengths. In addition to demographics, IB length and port of exit data were obtained. A 1-way analysis of variance was used to test whether IB length varied by sex or port of exit, and a standard Pearson correlation was used to test for IB length and age significance, with a significance level of P < .05. Intraclass correlation coefficients showed significant agreement in IB length across all observers. No significant difference was noted between the exit port and IB length. An important effect was reported for sex, indicating women have generally shorter IB lengths (9.43 ± 3.99 vs 10.55 ± 3.92). There was a significant correlation with age, but the relationship was weak. Edentulous mandibles have an altered anatomic landscape, and establishing predictive IB dimensions aids practitioners in surgical planning.

Influence of root shape on canal complexity at the mandibular molar apical surgical resection level: A micro-CT study.

OBJECTIVES: This study aimed to investigate the relationship between the aspect ratios of mandibular molar roots at the apical 3-mm level and their root canal complexity. DESIGN: This study used micro-CT imaging to analyze 163 two-rooted mandibular molars. The aspect ratios of the roots at the apical 3-mm level were categorized as "< 2.75" or "≥ 2.75" (mesial) and "< 1.75" or "≥ 1.75" (distal). A two-dimensional (2D) analysis focused on four apical axial cross-section levels to determine the presence of main and accessory canals and isthmus. Additionally, a three-dimensional (3D) assessment of the apical 4-mm of both roots examined main and accessory canals, apical foramina, apical deltas, and middle mesial canals. RESULTS: Mesial roots with aspect ratios ≥ 2.75 showed a higher number of main canals at all levels compared to those with aspect ratios < 2.75 at the 3-mm level. Additionally, the ≥ 2.75 group exhibited more accessory canals and a higher average number of accessory canals. The 3D assessment confirmed significantly more accessory canals and apical foramina in the ≥ 2.75 group. The prevalence of roots with apical deltas was nearly double in the ≥ 2.75 group, and middle mesial canals were exclusively found in this group. In the distal root, the ≥ 1.75 group showed a significantly higher number of main canals at all axial levels. No significant differences were observed between groups in terms of accessory canals, apical foramina, or deltas. CONCLUSIONS: A higher root aspect ratio is related to higher anatomical complexity.

Isolated fracture of the coronoid process following a molar extraction: A rare case report.

Isolated coronoid process fractures are uncommon, and iatrogenic isolated fractures are extremely rare. This case describes a displaced fracture of an isolated coronoid process thought to be due to excessive force applied by a dentist that had been overlooked and left untreated for about a month. The patient was a woman in her late 50's and she had undergone a molar extraction. Her dentist had confused her symptoms of trismus, pain, and facial oedema with the complex tooth extraction procedure. Following a cone-beam computed tomography (CBCT) scan we showed that the mandibular coronoid process on her right side had suffered a longitudinal fracture, and the fractured fragment had rotated upwards and inwards. Following successful surgical elimination of the fragmented coronoid process, the patient received targeted physiotherapy sessions that yielded excellent results. At the five-month follow-up, the ability of the patient to open her mouth had improved enormously, and her facial appearance almost recovered to its original state.

Craniomandibular transverse tomographic evaluation after anterior open bite orthodontic treatment with miniplates anchorage.

BACKGROUND: Skeletal anterior open bite (SAOB) represents one of the most complex and challenging malocclusions in orthodontics. Orthodontic treatment supported by miniplates enable to reduce the need for orthognathic surgery. Transverse dimension may be affected by intrusion biomechanics. This study aims to assess transverse bone alterations in patients with SAOB who underwent orthodontic treatment with absolute anchorage using four miniplates. METHODS: A total of 32 patients of both sexes, with an average age of 33.8 years, diagnosed with SAOB and treated orthodontically with four miniplates (one in each hemiarch), were selected for this study. Tomographic examinations were performed before (T1) and after (T2) orthodontic treatment. Linear measurements (width of the maxillary base, maxillary alveolar, maxillary root, maxillary dental cusp, mandibular alveolar) and angular measurements (maxillary intermolar angle) were assessed in these images. The Shapiro-Wilks normality tests were applied to verify data distribution, and the paired t-test was used to compare the initial and final measures obtained. RESULTS: Among the evaluated parameters, the maxillary alveolar width, maxillary dental cusp width, mandibular alveolar cusp width, and intermolar angle showed statistically significant differences between T1 and T2 (p < 0.05). However, maxillary base and maxillary root widths showed no significant difference (p > 0.05). CONCLUSIONS: Intrusion and distalization with miniplates in SAOB therapy may lead to significant expansive changes, due to molars cusps width and buccal inclination increase restricted at the alveolar level.

Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images.

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

Risk factors associated with the severity of pericoronitis of mandibular third molar.

PURPOSE: The factors related to pericoronitis severity are unclear, and this study aimed to address this knowledge gap. MATERIALS AND METHODS: In total, 113 patients with pericoronitis were included, and their demographic, clinical, and radiographic characteristics were recorded. The Patient-Clinician Pericoronitis Classification was used to score and categorize the severity of pericoronitis. Statistical analysis was conducted to examine the participants' characteristics, validity of the Patient-Clinician Pericoronitis Classification, and risk factors associated with the severity of pericoronitis. RESULTS: The demographic, clinical, and radiographic characteristics of males and females were similar, except for Winter's classification, pain, and intraoral swelling. The constructive validity of the Patient-Clinician Pericoronitis Classification was confirmed with three latent factors, including infection level, patient discomfort, and social interference. Ordinal logistic multivariate regression analysis revealed that upper respiratory tract infection was the sole risk factor associated with pericoronitis severity in males (odds ratio = 4.838). In females, pericoronitis on the right side (odds ratio = 2.486), distal radiolucency (odds ratio = 5.203), and menstruation (odds ratio = 3.416) were significant risk factors. CONCLUSION: This study demonstrated the constructive validity of the Patient-Clinician Pericoronitis Classification. Among females, pericoronitis in mandibular third molars on the right side with radiolucency in menstruating individuals was more severe. In males, upper respiratory tract infection was the sole risk factor associated with pericoronitis severity. CLINICAL RELEVANCE: Individuals with risk factors should be aware of severe pericoronitis in the coming future.

A Preclinical Trial Protocol Using an Ovine Model to Assess Scaffold Implant Biomaterials for Repair of Critical-Sized Mandibular Defects.

The present work describes a preclinical trial (in silico, in vivo and in vitro) protocol to assess the biomechanical performance and osteogenic capability of 3D-printed polymeric scaffolds implants used to repair partial defects in a sheep mandible. The protocol spans multiple steps of the medical device development pipeline, including initial concept design of the scaffold implant, digital twin in silico finite element modeling, manufacturing of the device prototype, in vivo device implantation, and in vitro laboratory mechanical testing. First, a patient-specific one-body scaffold implant used for reconstructing a critical-sized defect along the lower border of the sheep mandible ramus was designed using on computed-tomographic (CT) imagery and computer-aided design software. Next, the biomechanical performance of the implant was predicted numerically by simulating physiological load conditions in a digital twin in silico finite element model of the sheep mandible. This allowed for possible redesigning of the implant prior to commencing in vivo experimentation. Then, two types of polymeric biomaterials were used to manufacture the mandibular scaffold implants: poly ether ether ketone (PEEK) and poly ether ketone (PEK) printed with fused deposition modeling (FDM) and selective laser sintering (SLS), respectively. Then, after being implanted for 13 weeks in vivo, the implant and surrounding bone tissue was harvested and microCT scanned to visualize and quantify neo-tissue formation in the porous space of the scaffold. Finally, the implant and local bone tissue was assessed by in vitro laboratory mechanical testing to quantify the osteointegration. The protocol consists of six component procedures: (i) scaffold design and finite element analysis to predict its biomechanical response, (ii) scaffold fabrication with FDM and SLS 3D printing, (iii) surface treatment of the scaffold with plasma immersion ion implantation (PIII) techniques, (iv) ovine mandibular implantation, (v) postoperative sheep recovery, euthanasia, and harvesting of the scaffold and surrounding host bone, microCT scanning, and (vi) in vitro laboratory mechanical tests of the harvested scaffolds. The results of microCT imagery and 3-point mechanical bend testing demonstrate that PIII-SLS-PEK is a promising biomaterial for the manufacturing of scaffold implants to enhance the bone-scaffold contact and bone ingrowth in porous scaffold implants. MicroCT images of the harvested implant and surrounding bone tissue showed encouraging new bone growth at the scaffold-bone interface and inside the porous network of the lattice structure of the SLS-PEK scaffolds.

Productizing Nano-Bioactive Glass-Based Bilayer Scaffolds: A Graft for Reconstruction of Mandibular and Femoral Bone Defects.

This investigation aimed to construct a bilayer scaffold integrating alginate and gelatin with nanobioactive glass (BG), recognized for their efficacy in tissue regeneration and drug delivery. Scaffolds, namely, alginate/gelatin (AG), alginate-/actonel gelatin (AGD), alginate actenol/gelatin-45S5 BG (4AGD), and alginate-actonel/gelatin-59S BG (5AGD), were assembled using a cost-effective freeze-drying method, followed by detailed structural investigation via powder X-ray diffraction as well as morphological characterization using field emission scanning electron microscopy (FESEM). FESEM revealed a honeycomb-like morphology with distinct pore sizes for nutrient, oxygen, and drug transport. The scaffolds evidently exhibited hemocompatibility, high porosity, good swelling capacity, and biodegradability. In vitro studies demonstrated sustained drug release, particularly for scaffolds containing actonel. In vivo tests showed that the bilayer scaffold promoted new bone formation, surpassing the control group in bone area increase. The interaction of the scaffold with collagen and released ions improved the osteoblastic function and bone volume fraction. The findings suggest that this bilayer scaffold could be beneficial for treating critical-sized bone defects, especially in the mandibular and femoral regions.

Artificial intelligence in age and sex determination using maxillofacial radiographs: A systematic review.

In the past few years, there has been an enormous increase in the application of artificial intelligence and its adoption in multiple fields, including healthcare. Forensic medicine and forensic odontology have tremendous scope for development using AI. In cases of severe burns, complete loss of tissue, complete or partial loss of bony structure, decayed bodies, mass disaster victim identification, etc., there is a need for prompt identification of the bony remains. The mandible, is the strongest bone of the facial region, is highly resistant to undue mechanical, chemical or physical impacts and has been widely used in many studies to determine age and sexual dimorphism. Radiographic estimation of the jaw bone for age and sex is more workable since it is simple and can be applied equally to both dead and living cases to aid in the identification process. Hence, this systematic review is focused on various AI tools for age and sex determination in maxillofacial radiographs. The data was obtained through searching for the articles across various search engines, published from January 2013 to March 2023. QUADAS 2 was used for qualitative synthesis, followed by a Cochrane diagnostic test accuracy review for the risk of bias analysis of the included studies. The results of the studies are highly optimistic. The accuracy and precision obtained are comparable to those of a human examiner. These models, when designed with the right kind of data, can be of tremendous use in medico legal scenarios and disaster victim identification.

Are computed tomography images of the mandible useful in age and sex determination? A forensic science meta-analysis.

OBJECTIVES: This meta-analysis addresses the use of mandibular computed tomography (CT) scans for age and/or sex determination in forensic science. METHODS: Six databases were searched until June 2023, using the keyword "mandible" combined with keywords related to "multislice computed tomography" (MCT) or "cone-beam computed tomography" (CBCT) and keywords related to "skeletal age determination" or "sex determination analysis." MAIN RESULTS: Among the 23 studies included, 11 used MCT and 12 used CBCT to perform forensic assessments. Age determination was the aim of a single study, sex and agedeterminations were the objective of five studies, and the other studies investigated the determination of sex only. Metaanalysis could be performed only for sex determination. CONCLUSIONS: Mandible measurements are useful in sex determination, as the bicondylar and bigonial breadth are larger in males than in females. For the mandible angle, the meta-analysis results confirm sex dimorphism in CBCT scans but not in MCT scans. For age estimation, further studies are needed to prove that the mandible hole is a reliable parameter for age estimation. PROSPERO registration number: CRD42021260967.

A systematic review and meta-analysis of the prevalence and global distribution of middle mesial canals in mandibular molars identified by CBCT.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies. MATERIALS AND METHODS: PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software. RESULTS: Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1st and 2nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2nd molars. The highest prevalence of MMC in 1st molar was attributed to South Asia (11.24%) and Africa (6.61%). CONCLUSIONS: The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure. CLINICAL RELEVANCE: The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars.

Solitary primary intraosseous xanthoma of the mandible in a 15-year-old boy: a case report.

BACKGROUND: A xanthoma is a rare bone condition consisting of a predominant collection of lipid-rich, foamy histiocytes. The central xanthoma of the jaws is a unique benign tumor. CASE REPORT: A 15-year-old Caucasian male has been presented to our department. He had radiological changes in the area of the left mandibular angle, with an area of diffuse osteolysis of 3.0 cm by 2.0 cm. Computed tomography reveals an area of diffuse osteolysis that starts from the distal root of the lower second molar and reaches the ascending process. A bone biopsy was performed, which revealed a benign proliferative process composed of histiocytic cells involving and infiltrating trabecular bone in a background of loose fibrous connective tissue devoid of any other significant inflammatory infiltrate. The size of the formation was 2.9 cm by 2.0 cm. Immunohistochemical staining for CD68 was strongly positive and negative for S-100 and CD1a. From routine blood tests, cholesterol, triglycerides, and blood sugar are within normal values, which excludes systemic metabolic disease. Subsequent to the surgical intervention, the patient underwent postoperative assessments at intervals of 14, 30, 60 days, and a year later, revealing the absence of any discernible complications during the aforementioned observation periods. CONCLUSION: The diagnosis of primary xanthoma of the mandible is rare and can often be confused with other histiocytic lesions. A differential diagnosis should be made with nonossifying fibroma and Langerhans cell histiocytosis, as in our case. In these cases, immunohistochemistry with CD 68, S-100, and CD1a, as well as blood parameters, are crucial for the diagnosis.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Automatic extraction of facial median sagittal plane for patients with asymmetry based on the EDMA alignment algorithm.

BACKGROUND: We aimed to establish a novel method for automatically constructing three-dimensional (3D) median sagittal plane (MSP) for mandibular deviation patients, which can increase the efficiency of aesthetic evaluating treatment progress. We developed a Euclidean weighted Procrustes analysis (EWPA) algorithm for extracting 3D facial MSP based on the Euclidean distance matrix analysis, automatically assigning weight to facial anatomical landmarks. METHODS: Forty patients with mandibular deviation were recruited, and the Procrustes analysis (PA) algorithm based on the original mirror alignment and EWPA algorithm developed in this study were used to construct the MSP of each facial model of the patient as experimental groups 1 and 2, respectively. The expert-defined regional iterative closest point algorithm was used to construct the MSP as the reference group. The angle errors of the two experimental groups were compared to those of the reference group to evaluate their clinical suitability. RESULTS: The angle errors of the MSP constructed by the two EWPA and PA algorithms for the 40 patients were 1.39 ± 0.85°, 1.39 ± 0.78°, and 1.91 ± 0.80°, respectively. The two EWPA algorithms performed best in patients with moderate facial asymmetry, and in patients with severe facial asymmetry, the angle error was below 2°, which was a significant improvement over the PA algorithm. CONCLUSIONS: The clinical application of the EWPA algorithm based on 3D facial morphological analysis for constructing a 3D facial MSP for patients with mandibular deviated facial asymmetry deformity showed a significant improvement over the conventional PA algorithm and achieved the effect of a dental clinical expert-level diagnostic strategy.

Vertical mandibular asymmetry and hand measurements in patients in growth: cross-sectional study.

Objectives: The aim of this study was to determine the relationship between the vertical mandibular ramus asymmetry and the hand measurements asymmetry in growing patients. Material and Methods: Panoramic radiographs and comparative radiographs of the right and left hands of 40 patients (14 males and 26 females) between 6 and 16 years old (mean age of 11.35±1.99 years) were evaluated. The total height of the mandibular ramus was measured, and the asymmetry index was calculated. The lengths of the proximal, middle and distal phalanges and the metacarpals of the five digits of both hands were measured and the absolute differences R-L were calculated for each one. Results: A statistically significant association between the presence of vertical mandibular ramus asymmetry and the presence of phalanges asymmetry FPII (p=0.016), FPIII (p=0.016), FPIV (p=0.033), FMIII (p=0.031) and FMIV (p=0.016) was observed. Conclusions: Mandibular asymmetry appears not to be isolated but also present in other body districts such as the phalanx bones. The total vertical asymmetry of the mandibular ramus showed an association with the asymmetry of the lengths of the FPIII, FMIII, FPIV, FMIV and FPII in growing individuals, with association between the side of mandibular asymmetry and the side of the phalanx's asymmetry. The asymmetry of this phalanges increases with increasing index of vertical mandibular ramus asymmetry.

Comparative cephalometric study of the airways between different ethnic groups with normal occlusion.

OBJECTIVE: This study aimed to compare the nasopharynx and oropharynx airway dimensions of Caucasians, Blacks, Japanese, Japanese Brazilians, and Black Caucasians. METHODS: A sample of 216 lateral radiographs of untreated young Brazilian subjects (mean age of 12.94 years; SD 0.88) were divided into five groups: Black Caucasian, Black, Caucasian, Japanese, and Japanese Brazilian. Lateral radiographs were used to measure the oropharynx (from the midpoint on the soft palate to the closest point on the anterior pharyngeal wall) and the nasopharynx (from the intersection of the posterior border of the tongue and the inferior border of the mandible to the closest point on the posterior pharyngeal wall). Analyses of variance (ANOVA) and Tukey's test were performed (p< 0.05). RESULTS: The linear dimension of the oropharynx was similar among the different ethnic groups. Caucasian individuals presented a significantly greater linear dimension of the nasopharynx than Black Caucasian and Black individuals. CONCLUSIONS: All the groups had similar buccopharyngeal values. However, Caucasian individuals had significantly higher values when compared to Black Caucasians and Black individuals.

Central giant cell granuloma in the posterior region of mandible mimicking a fibro-osseous lesion and hemangioma: a case report.

BACKGROUND: A central giant cell granuloma (CGCG) is a benign, proliferative, intraosseous, and non-odontogenic lesion occurring primarily in children and young adults. On the histological level, it is characterized by numerous multinucleated giant cells scattered randomly throughout a sea of spindle-shaped mesenchymal stromal cells which are dispersed throughout the fibrovascular connective tissue stroma containing areas of haemorrhage. When it comes to radiographic features, CGCG can have an array of variations, ranging from well-defined expansile lesions to ill-defined and destructive lesions, with or without expansion. CASE PRESENTATION: This case report reviews an 11-year-old Caucasian patient with a chief complaint of slow-growing swelling involving the right posterior mandibular region. The cone beam computed tomography (CBCT) revealed an ill-defined mixed lesion mimicking both fibro-osseous lesion and hemangioma. However, microscopic examination revealed multinucleated giant cells in a fibrous stroma suggestive of central giant cell granuloma. CONCLUSION: Our intent in reporting this case is to highlight the importance of thorough clinical, radiographical and histopathological examination for accurate diagnosis and therapeutic interventions as well as to emphasize the importance of taking different possibilities into consideration when examining bony swellings in the head and neck region.