Does mandibular advancement ortho-surgical procedure cause condyle changes? A case-series analysis.

INTRODUCTION: Mandibular advancement surgery corrects bone bases while establishing patients' functional and aesthetic rehabilitation. However, little is known about the results of this procedure in the structures that make up the stomatognathic system, as the condyles. OBJECTIVE: This study aimed to evaluate the structural and positional changes of mandibular condyles in ortho-surgical patients who underwent mandibular advancement surgery. MATERIAL AND METHODS: A prospective investigation was conducted with cone-beam computed tomography images. Using Dolphin Imaging® software, seven ortho-surgical patients with Angle Class II malocclusion and mandibular deficiency were evaluated. The images assessed were obtained at pre-surgical phase and after, at least, 1 year of the procedure. To study the structural and positional changes of condyles, linear and angular measurements were obtained, and the right and left sides of patients were compared. Descriptive statistical analysis was performed and, in order to verify possible significant differences, normality tests (Kolmogorov-Smirnov) were applied, followed by a paired t-test to define significance. RESULTS: For all measures evaluated in this study, no statistically significant differences were found. CONCLUSION: The ortho-surgical procedure performed did not change the structure and position of the condyles of patients who underwent surgical mandibular advancement. Right and left mandibular condyles behaved similarly, suggesting stability and condylar adaptation after surgery.

Characteristics, Treatment, and Prognosis of Pediatric Symphyseal/Parasymphyseal-Condylar Fractures.

BACKGROUND: Pediatric condylar fractures combined with symphyseal or parasymphyseal fractures are common but challenging to manage. The authors present fracture characteristics, propose a treatment algorithm, and evaluate the treatment prognosis of pediatric symphyseal/parasymphyseal-condylar fractures. METHODS: A retrospective review was conducted on pediatric patients who underwent treatment for symphyseal/parasymphyseal-condylar fractures in a trauma center between January of 2006 and January of 2021. Demographic and fracture characteristics were recorded. Complications and functional evaluations, including maximum interincisal opening, Helkimo anamnestic index, and clinical dysfunction index, were assessed after at least 1 year of follow-up. RESULTS: After screening, 104 participants met the inclusion criteria. Among them, 50.96% received open reduction and internal fixation for symphyseal/parasymphyseal fractures and closed treatment for condylar fractures, 45.19% were treated by liquid diet and functional exercise, and the remaining 3.85% with severe malocclusion were treated with the assistance of orthodontic appliances. During follow-up, the average maximum interincisal opening of the patients increased from 17 ± 6.29 mm to 41.64 ± 6.33 mm. No subjective symptoms were observed in 86.54% of the patients and 79.81% showed no or mild clinical symptoms. Except for 1 patient who developed temporomandibular joint ankylosis, no other severe complication was reported. Postfracture remodeling of the nonfractured condyle was noted in 3 cases. CONCLUSIONS: Pediatric symphyseal/parasymphyseal-condylar fractures present unique biomechanical and anatomic challenges that require special consideration during management. In this study, satisfactory functional prognosis was achieved following implementation of the treatment algorithm. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Post-BSSO condylar position stability: a comparison of miniplate and lag screw fixation.

BACKGROUND: This study was conceived to assess the postoperative stability of condylar position following fixation with miniplates and lag screws after bilateral sagittal split osteotomy (BSSO). METHODS: This retrospective study included a cohort of 20 patients undergoing BSSO using the Obwegeser-Dal Pont modification. The bony segments were stabilized using either miniplates with two 2.0-mm monocortical screws per segment or three 2.0-mm bicortical lag screws along the mandible's superior border. Pre- and postoperative (7-day interval) spiral computed tomography scans were conducted to assess skeletal changes across both groups. Data analysis employed Wilcoxon signed-rank and Wilcoxon rank-sum tests (α = 0.05). RESULTS: No statistically significant difference was observed between the pre-and postoperative condylar position parameters (P>0.05). However, the lag screw group showed a marginal significant increase in the left condyle's angulation (preoperative: 24.83 ± 6.37 vs. postoperative: 32.5 ± 4.93; P = 0.04). Changes in condylar height, length, and width were not statistically significant before and after BSSO in either groups (P>0.05). Nor was any statistically significant difference found between the miniplates and lag screws groups regarding condylar position parameters (P>0.05). CONCLUSION: The results indicated that both lag screw and miniplate fixation methods can be effectively employed in BSSO procedures without impacting condylar position parameters. Thus, either fixation method can be chosen depending on factors such as the surgeon's preference and clinical outcomes.

Effect of stainless-steel wire internal fixation on intracapsular condylar fracture.

OBJECTIVES: The aim of the study was to investigate the clinical effect of stainless-steel wire fixation on the early mouth-opening movement of an intracapsular fracture involving the condylar process. MATERIALS AND METHODS: In this study, patients who underwent mandibular condylar intracapsular fracture surgery in our hospital from 2012 to 2020 were selected as research subjects. A total of 44 patients received steel wire internal fixation treatment, 32 patients received titanium plate-and-nail rigid internal fixation, and 28 patients underwent conservative non-surgical treatment. RESULTS: For the patients in the stainless-steel wire group, the degree of mouth opening reached normal levels of 3.7 cm approximately 10 days after surgery. The recovery time for the patients in the titanium plate-and-nail rigid internal-fixation group was 21 days, while the patients in the conservative treatment group needed 60 days to recover. CONCLUSION: The treatment of fixation with a stainless-steel wire for intracapsular condylar fracture reduced the time taken to perform mouth-opening exercises and improved the recovery rate of patients.

OBJETIVO: Explorar el efecto clínico de la fijación de alambre de acero inoxidable en el movimiento temprano de apertura de la boca en la fractura interna del cóndilo. MÉTODO: Este estudio seleccionó a pacientes que se sometieron a cirugía de fractura intracapsular de cóndilo en nuestro hospital de 2012 a 2020 como sujetos de investigación. Un total de 44 pacientes recibieron tratamiento de fijación interna de alambre de acero, 32 recibieron placa de titanio y fijación interna con clavos, y 28 recibieron tratamiento conservador no quirúrgico. RESULTADOS: En los pacientes del grupo de alambre de acero inoxidable, alrededor de 10 días después de la cirugía el grado de apertura de la boca alcanzó un valor normal de 3.7 cm. El tiempo de recuperación de los pacientes en el grupo de fijación interna con clavos y placa de titanio fue de 21 días, mientras que los pacientes en el grupo de tratamiento conservador tardaron 60 días en recuperarse. CONCLUSIONES: La fijación con alambre de acero inoxidable para el tratamiento de la fractura intracapsular del cóndilo acorta el tiempo hasta la apertura de la boca y mejora la tasa de recuperación de los pacientes.

Effect of tranexamic acid on postoperative blood loss.

The aim of this article was to evaluate the efficacy of tranexamic acid (TXA) to reduce blood loss after maxillofacial fracture surgery. Clinical data were collected retrospectively on patients with unilateral fractures of the zygomaticomaxillary complex (ZMC) or mandibular condyle. Patients were then further divided into TXA and control groups according to whether or not TXA was used after surgery. The amount of postoperative blood loss was evaluated by negative pressure drainage volume. Data were statistically analysed. In patients with unilateral ZMC fractures, total postoperative blood loss in the TXA group was about 30 ml less than that in the control group (p = 0.006). It was significantly less on the first and second postoperative days. However, in patients with unilateral mandibular condylar fractures, there was no significant difference between the TXA and control groups (p = 0.917). TXA can reduce postoperative bleeding in patients with ZMC fractures, and the optimal usage time is on the first and second postoperative days. For patients with mandibular condylar fractures, TXA may not be used.

Facial Asymmetry Caused by Mandibular Condylar Hyperplasia: A Two Center Study.

BACKGROUND: Condylar hyperplasia is a non-neoplastic overgrowth of the mandibular condyle. The disorder is progressive and causes gradual jaw deviation, facial asymmetry, and dental malocclusion. The only treatment capable of stopping hyperplastic growth is surgical condylectomy to remove the upper portion of the condyle containing the deranged growth center. When this procedure is conducted in proportion to the length of the healthy side it may also correct the jaw deviation and facial asymmetry. OBJECTIVES: To assess the degree to which condylectomy corrects the asymmetry and to determine the proportion of patients after condylectomy who were satisfied with the esthetic result and did not desire further corrective surgery. METHODS: We conducted a retrospective analysis of medical records of patients who underwent condylectomy that was not followed by corrective orthognathic surgery for at least 1 year to determine the degree of correction of chin deviation and lip cant. Patient satisfaction from treatment or desire and undergo further corrective surgery was reported. RESULTS: Chin deviation decreased after condylectomy from a mean of 4.8° to a mean of 1.8° (P < 0.001). Lip cant decreased after condylectomy from a mean of 3.5° to a mean of 1.5° (P < 0.001). Most patients (72%) were satisfied with the results and did not consider further corrective orthognathic surgery. CONCLUSIONS: Proportional condylectomy could be a viable treatment to both arrest the condylar overgrowth and achieve some correction of the facial asymmetry.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures.

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

The Evaluation of Condylar Position Change in the Asymmetric Mandible Following Sagittal Split Osteotomy.

BACKGROUND: The change of condyle position following orthognathic surgery affects the stability of treatments. This study aims to assess the correlation between the amount of condyles' position change and the severity of mandibular asymmetry following BSSO. MATERIALS AND METHODS: This is a cross-sectional study. Subjects with asymmetric mandibular prognathism following BSSO were studied. Subjects were classified into 2 groups: group 1, subjects had mandibular asymmetry without occlusal cant and underwent BSSO. Group 2, subjects had mandibular asymmetry with occlusal cant and underwent BSSO+ Lefort I osteotomy. The condyle position was evaluated using cone-beam computer tomography (CBCT). Pearson's correlation test was used to assess any correlation between the condyle changes and the change in the mandible in sagittal and anterior-posterior directions. RESULTS: A total of 44 subjects were studied. In group 1, the condyle tilted outward in the deviated condyle and inward in the non-deviated condyle immediately after osteotomy. After 12 months, both condyles showed a rotation relative to the original position. In group 2, the condyles of the deviated sides and non-deviated sides moved inferiorly after surgery (condylar sagging), which was more significant in the non-deviated sides. The condyle rotation was similar to group 1. The severity of asymmetry and occlusal cant correlate with the condylar position change in the two groups. CONCLUSION: The severity of mandibular asymmetry correlates with the amount of condyles' position change immediately after BSSO. However, the condyles tend to return to their original position 12 months later.

Does adjunctive fixation in conjunction with miniplate affect condylar position and morphology after mandibular advancement through bilateral sagittal split ramus osteotomy? A retrospective 3-dimensional CT comparative study.

To minimize condylar positional and morphological changes after mandibular advancement through bilateral sagittal split ramus osteotomy (BSSRO), surgeons add either a bicortical screw or a two-hole plate distal to the conventional single miniplate. Since there have been no previous studies investigating the effect of this combination, our study aimed to evaluate the short- and long-term effects of these adjunctive fixation methods (AFM) on condylar positional and morphological changes after mandibular advancement through BSSRO. This retrospective cohort study included consecutive patients with retruded mandibles who were treated in the Department of Orthognathic and TMJ Surgery at West China Hospital of Stomatology, Sichuan University. The patients were divided into two groups based on the primary predictor variable, which was the addition of AFM - either a single bicortical screw or a two-hole plate in addition to the single miniplate. The primary outcome variable was the condylar positional and morphological changes after mandibular advancement through BSSRO. Three-dimensional facial CT scans were obtained at three different time points (preoperatively - T0, 1 week postoperatively - T1, and 1 year postoperatively - T2) and analyzed using ITK-SNAP, 3D Slicer, and SlicerSALT software. Intergroup comparisons were conducted with an independent t-test, with a p-value of <0.05 considered significant. Correlations between the variables were estimated by Pearson correlation. The study comprised 51 patients (32 females, 19 males; mean age 25.13 ± 4.24 years), involving a total of 81 condyles (21 unilateral and 60 bilateral). There was a significant difference in long-term condylar displacement in favor of AFM along with a single miniplate (p < 0.001). The bicortical screw group recorded less condylar displacement than the two-hole plate group horizontally (0.11 mm vs 0.22 mm) and sagittally (0.03 mm vs 0.17 mm), but more vertically (0.85 mm vs 0.03 mm). Bone formation associated with AFM occurred on all condylar surfaces, compared with only three surfaces in the single miniplate group. The adjunctive method in addition to the single miniplate fixation method showed less condylar displacement and more bone apposition after mandibular advancement through BSSRO. The follow-up duration variable was the only significant determinant for volumetric changes in the condyle.

Management of Mandibular Condylar Sagittal Fracture Accompanied by Lateral Condylar Crest Defect.

BACKGROUND: The sagittal fracture of the mandibular condyle can be fixed with absorbable long screws. Absorbable long screws are generally inserted from the lateral crest of the condyle and are as close as possible to the medial pole of the condyle to obtain sufficient retention force. However, in clinical practice, patients with locally comminuted condylar fractures and partial defects in the lateral crest are often encountered. We validated the use of absorbable plates and long screws to fix mandibular condylar fractures with lateral crest defects, and postoperative follow-up showed good results. METHODS: The preoperative design indicated that if conventional long screws were used, more soft tissue need to be pulled downward to achieve the appropriate drilling angle. If an absorbable plate was used, the degree of downward pulling of soft tissue was smaller, which can better protect the parotid gland tissue and facial nerve. The surgery was performed according to the preoperative design, using an absorbable plate scheme. RESULTS AND DISCUSSION: Postoperative CT confirmed a stable anatomical reduction of condyle. Four-month follow-up showed that the patient's facial shape, occlusion, and mouth opening were all good. Follow-up CT showed good fracture healing. It is feasible to use absorbable plates and long absorbable screws to fix mandibular condylar sagittal fracture accompanied by lateral condylar crest defect.

Abordagem cirúrgica em fratura de sínfise e côndilo mandibular bilateral em paciente pediátrico: um relato de caso / Surgical approach for syphysis and bilateral mandibular condyle fracture in a pediatric patient: a case report

As indicações de tratamento das fraturas mandibulares em paciente pediátrico variam em conservador, fixação não rígida e interna rígida. Alterações no crescimento ósseo, disfunções na articulação temporomandibular e assimetrias faciais podem ser decorrentes ao insucesso do tratamento. O objetivo deste trabalho consiste em relatar abordagem cirúrgica em fratura de sínfise e côndilo mandibular bilateral em paciente pediátrico. Paciente gênero feminino, 09 anos de idade, foi encaminhada ao Hospital Geral do Estado - Bahia vítima de queda de nível, cursando com trauma em face. Apresentou queixa principal, referida pela progenitora, de dificuldades em fechar a boca. Ao exame físico, a paciente apresentou mobilidade atípica à manipulação da mandíbula, mordida aberta anterior, equimose sublingual, ausência das unidades dentárias 74 e 75, com abertura bucal regular e suturas em posição em região de mento. Ao exame de imagem de tomografia computadorizada da face, pôde-se notar sinais sugestivos de fratura em região de sínfise e côndilos mandibulares bilateral. Após diagnóstico das fraturas, a paciente foi submetida à cirurgia sob anestesia geral para redução e fixação das mesmas. Realizou-se acessos em ferimento na região mentual e retromandibular bilateral com posterior síntese das fraturas utilizando fixação interna rígida com placas do sistema 2.0mm, associada a odontossíntese na fratura de sínfise. Ao acompanhamento periódico, a eleição do tratamento cirúrgico para fraturas mandibulares em pacientes pediátricos, pode permitir segurança no crescimento ósseo mandibular e facial(AU)

The indications for treatment of mandibular fractures in pediatric patients vary from conservative, non-rigid fixation and rigid internal fixation. Changes in bone growth, temporomandibular joint disorders and facial asymmetries may be due to treatment failure. The objective of this work is to report a surgical approach to bilateral symphysis and mandibular condyle fractures in a pediatric patient. Female patient, 9 years old, was sent to the State General Hospital - Bahia, victim of a fall in level, suffering from trauma to the face. She presented a main complaint, mentioned by her mother, of difficulties in closing her mouth. On physical examination, the patient presented atypical mobility when manipulating the jaw, anterior open bite, sublingual ecchymosis, absence of dental units 74 and 75, with regular mouth opening and sutures in position in the chin region. When examining the computed tomography image of the face, signs suggestive of fracture in the region of the symphysis and bilateral mandibular condyles were noted. After diagnosis of the fractures, the patient underwent surgery under general anesthesia to reduce and fix them. Access was performed on a wound in the mental and bilateral retromandibular region with subsequent synthesis of the fractures using rigid internal fixation with 2.0mm system plates, associated with odontosynthesis in the symphysis fracture. With periodic monitoring, the choice of surgical treatment for mandibular fractures in pediatric patients can allow for safe mandibular and facial bone growth(AU)

Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Evaluating changes in the condylar head after orthognathic surgery with or without articular disc repositioning: a systematic review.

Failures in orthognathic surgery are associated with different factors, including those related to untreated or undiagnosed preoperative temporomandibular joint (TMJ) disorders. This systematic review aimed to assess potential alterations in the condylar head following orthognathic surgery. A systematic search for randomised controlled trials and retrospective studies was performed. For inclusion in the review, studies had to meet the following eligibility criteria according to the PICO framework: Patients: patients with orthognathic deformity and temporomandibular dysfunction (or temporomandibular osteoarthritis); Intervention: patients submitted to orthognathic surgery concomitantly with TMJ disjunction; Control: patients undergoing only orthognathic surgery with or without presurgical data; and Outcome: changes in temporomandibular joint position and volume. Nine studies met all the inclusion criteria and were selected for qualitative analysis. The results of this review show that simultaneous articular disc repositioning and orthognathic surgery provide better results in patients with preoperatively diagnosed condylar osteoarthritic changes. In conclusion, condylar remodelling (resorption/deposition) and its extent are determined by the direction of condylar displacement during surgery. Other factors such as age are also associated with the development of condylar resorption.

Novel Use of Virtual Reality and Augmented Reality in Temporomandibular Total Joint Replacement Using Stock Prosthesis.

This technical innovation demonstrates the use of ImmersiveTouch Virtual Reality (VR) and Augmented Reality (AR)-guided total temporomandibular joint replacement (TJR) using Biomet stock prosthesis in 2 patients with condylar degeneration. TJR VR planning includes condylar resection, prosthesis selection and positioning, and interference identification. AR provides real-time guidance for osteotomies, placement of prostheses and fixation screws, occlusion verification, and flexibility to modify the surgical course. Radiographic analysis demonstrated high correspondence between the preoperative plan and postoperative result. The average differences in the positioning of the condylar and fossa prosthesis are 1.252 ± 0.269 mm and 1.393 ± 0.335 mm, respectively. The main challenges include a steep learning curve, intraoperative technical difficulties, added surgical time, and additional costs. In conclusion, the case report demonstrates the advantages of implementing AR and VR technology in TJR's using stock prostheses as a pilot study. Further clinical trials are needed prior to this innovation becoming a mainstream practice.

Evaluation of the Efficacy of Three Times Titanium Plate Gradual Fixation Method in the Treatment of Extracapsular Condylar Fractures.

OBJECTIVE: An improved method of treating inwardly dislocated mandibular extracapsular condylar fracture-three times titanium plate gradual fixation method was introduced, and the clinical efficacy of this method was evaluated. METHODS: Twenty patients with extracapsular condylar fractures who underwent surgical treatment using the three times titanium plate gradual restoration and fixation method in the Department of Oral Craniomaxillofacial Surgery of the Ninth People's Hospital of Shanghai from November 2020 to June 2023 were selected as the study subjects. RESULTS: After condylar restoration 22 sides reached healing and 1 side was basically healed; in 3 months after the operation, the degree of opening the mouth and the type of the opening of the mouth reached normal, and 1 case had mildly poor occlusion, which required to be further adjusted through orthodontics, and there was no temporomandibular function disorder or facial nerve function damage. CONCLUSION: Three times of gradual fixation with a titanium plate can make the condylar process achieve precise and stable repositioning, and make the surgical process orderly, and it is a kind of reliable fixation method for extracapsular condylar fractures.

Management of bilateral condylar agenesis by distraction osteogenesis: a rare case report.

Condylar agenesis is a rare case involving developmental disturbances related to growth of mandible, facial aesthetics, dentition development, muscle deformation, and occlusal problems. As such, this is a rare condition, and there is no internationally accepted protocol for the same. Underdevelopment or defective formation of condyle may be congenital or acquired. Condylar agenesis is congenital non formation of condyle, while hypoplasia is poor development. We report a case of bilateral condylar agenesis in a 30-year-old female patient.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Long-term evaluation of condylar positional and volumetric parameters and skeletal stability in Class III bimaxillary orthognathic surgery patients.

This retrospective study examined long-term (4-5 years) condylar positional and volumetric changes and skeletal stability after bimaxillary orthognathic surgery in skeletal Class III patients. Pre-surgical (T0: 0.9 ± 1.1 months) and post-surgical (T1: 0.6 ± 0.7 months; T2: 12.8 ± 3.1 months; T3: 56.5 ± 6.5 months) cone beam computed tomography (CBCT) images of 22 patients were obtained. CBCT multiplanar reformation (MPR) images were generated, and three-dimensional (3D) condylar models were constructed and superimposed to compare changes in condylar volume from pre- to postoperative. Condylar position in the sagittal and coronal planes altered immediately after surgery; however at long-term follow-up, the condyles had returned to their pre-surgical position. The condyles remained slightly inwardly rotated at short-term (-2.6°, 95% confidence interval -3.5° to -1.7°) and long-term (-1.9°, 95% confidence interval -2.8° to -1.0°) follow-up. Changes in condylar volume were insignificant after surgery. Condylar positional changes had no effect on skeletal stability. However, patients with an increased face height prior to surgery and more retrusive jaw position postoperatively were more prone to condylar resorption. Surgical changes remained stable 4-5 years after surgery. In conclusion, condylar position changed insignificantly following surgical correction in Class III patients provided that the correct surgical technique was employed.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.