ABSTRACT
Axonal damage is a common feature of traumatic injury and neurodegenerative disease. The capacity for axons to regenerate and to recover functionality after injury is a phenomenon that is seen readily in the peripheral nervous system, especially in rodent models, but human axonal regeneration is limited and does not lead to full functional recovery. Here we describe a system where dynamics of human axonal outgrowth and regeneration can be evaluated via live imaging of human-induced pluripotent stem cell (hiPSC)-derived neurons cultured in microfluidic systems, in which cell bodies are isolated from their axons. This system could aid in studying axonal outgrowth dynamics and could be useful for testing potential drugs that encourage regeneration and repair of the nervous system.
Subject(s)
Axons , Induced Pluripotent Stem Cells , Motor Neurons , Nerve Regeneration , Humans , Induced Pluripotent Stem Cells/cytology , Axons/physiology , Motor Neurons/physiology , Motor Neurons/cytology , Nerve Regeneration/physiology , Microfluidics/methods , Microfluidics/instrumentation , Cell Differentiation , Cells, Cultured , Lab-On-A-Chip Devices , Microfluidic Analytical Techniques/instrumentation , Microfluidic Analytical Techniques/methods , Cell Culture Techniques/methodsABSTRACT
We evaluated the diagnostic performance of newly developed microfluidic microplate-based fluorescent ELISA for anti-SARS-CoV-2 antibody detection: the Veri-Q opti COVID-19 IgG and IgM ELISAs (hereafter, "Opti IgG/M"; MiCo BioMed, Gyeonggi-do, Republic of Korea), in comparison with conventional ELISAs. A total of 270 serum samples were analyzed, among which 90 samples were serially obtained from 25 COVID-19 patients. Another 180 samples were collected from 180 SARS-CoV-2-negative individuals. As comparative assays, we used SCoV-2 Detect IgG/M ELISA (hereafter, "InBios IgG/M"; InBios, Seattle, WA, USA) and Veri-Q COVID-19 IgG/IgM ELISA (hereafter, "Veri-Q IgG/M"; MiCo BioMed). Compared with conventional ELISAs, the Opti IgG yielded 97.1-100.0% positive percent agreement, 95.2-98.0% negative percent agreement, 96.3-97.8% total percent agreement, and kappa values of 0.90-0.94. Between the Opti IgM and the InBios IgM, the values were 93.7%, 96.6%, 95.9%, and 0.89, respectively. For the Opti IgG, sensitivities for the samples collected from 0-7, 8-14, 15-21, and ≥ 22 days after symptom onset were 40.0, 58.3, 94.1, and 100.0%, respectively. The values for the Opti IgM were 30.0, 54.2, 88.2, and 80%, respectively. The diagnostic specificities of the Opti IgG and IgM were 99.4 and 97.2%, respectively. The microfluidic microplate-based fluorescent ELISAs showed comparable diagnostic performance to conventional ELISAs for detecting anti-SARS-CoV-2 antibodies. With the combination of high throughput, a simplified workflow, and the ability to analyze reduced volumes, this new technology has great potential for improving SARS-CoV-2 serologic testing.
Subject(s)
Antibodies, Viral , COVID-19 Serological Testing , COVID-19 , Enzyme-Linked Immunosorbent Assay , Immunoglobulin G , Immunoglobulin M , SARS-CoV-2 , Humans , Immunoglobulin M/blood , Immunoglobulin M/immunology , Immunoglobulin G/blood , SARS-CoV-2/immunology , SARS-CoV-2/isolation & purification , Antibodies, Viral/blood , Antibodies, Viral/immunology , COVID-19/diagnosis , COVID-19/blood , Enzyme-Linked Immunosorbent Assay/methods , COVID-19 Serological Testing/methods , Sensitivity and Specificity , Microfluidics/methods , Microfluidics/instrumentation , Middle Aged , Female , Male , AgedABSTRACT
In the age of information explosion, the exponential growth of digital data far exceeds the capacity of current mainstream storage media. DNA is emerging as a promising alternative due to its higher storage density, longer retention time, and lower power consumption. To date, commercially mature DNA synthesis and sequencing technologies allow for writing and reading of information on DNA with customization and convenience at the research level. However, under the disconnected and nonspecialized mode, DNA data storage encounters practical challenges, including susceptibility to errors, long storage latency, resource-intensive requirements, and elevated information security risks. Herein, we introduce a platform named DNA-DISK that seamlessly streamlined DNA synthesis, storage, and sequencing on digital microfluidics coupled with a tabletop device for automated end-to-end information storage. The single-nucleotide enzymatic DNA synthesis with biocapping strategy is utilized, offering an ecofriendly and cost-effective approach for data writing. A DNA encapsulation using thermo-responsive agarose is developed for on-chip solidification, not only eliminating data clutter but also preventing DNA degradation. Pyrosequencing is employed for in situ and accurate data reading. As a proof of concept, DNA-DISK successfully stored and retrieved a musical sheet file (228 bits) with lower write-to-read latency (4.4 min of latency per bit) as well as superior automation compared to other platforms, demonstrating its potential to evolve into a DNA Hard Disk Drive in the future.
Subject(s)
DNA , Microfluidics , DNA/biosynthesis , Microfluidics/methods , Microfluidics/instrumentation , Sequence Analysis, DNA/methods , Information Storage and Retrieval/methods , High-Throughput Nucleotide Sequencing/methodsABSTRACT
This study focuses on the use of pulsed electric fields (PEF) in microfluidics for controlled cell studies. The commonly used material for soft lithography, polydimethylsiloxane (PDMS), does not fully ensure the necessary chemical and mechanical resistance in these systems. Integration of specific analytical measurement setups into microphysiological systems (MPS) are also challenging. We present an off-stoichiometry thiol-ene (OSTE)-based microchip, containing integrated electrodes for PEF and transepithelial electrical resistance (TEER) measurement and the equipment to monitor pH and oxygen concentration in situ. The effectiveness of the MPS was empirically demonstrated through PEF treatment of the C6 cells. The effects of PEF treatment on cell viability and permeability to the fluorescent dye DapI were tested in two modes: stop flow and continuous flow. The maximum permeability was achieved at 1.8 kV/cm with 16 pulses in stop flow mode and 64 pulses per cell in continuous flow mode, without compromising cell viability. Two integrated sensors detected changes in oxygen concentration before and after the PEF treatment, and the pH shifted towards alkalinity following PEF treatment. Therefore, our proof-of-concept technology serves as an MPS for PEF treatment of mammalian cells, enabling in situ physiological monitoring.
Subject(s)
Cell Survival , Hydrogen-Ion Concentration , Animals , Electric Impedance , Oxygen/metabolism , Electricity , Microfluidics/methods , Microfluidics/instrumentation , Rats , Lab-On-A-Chip Devices , Cell Line, Tumor , Dimethylpolysiloxanes/chemistry , Microphysiological SystemsABSTRACT
CRISPR-based (Clustered regularly interspaced short palindromic repeats-based) technologies have revolutionized molecular biology and diagnostics, offering unprecedented precision and versatility. However, challenges remain, such as high costs, demanding technical expertise, and limited quantification capabilities. To overcome these limitations, innovative microfluidic platforms are emerging as powerful tools for enhancing CRISPR diagnostics. This review explores the exciting intersection of CRISPR and microfluidics, highlighting their potential to revolutionize healthcare diagnostics. By integrating CRISPR's specificity with microfluidics' miniaturization and automation, researchers are developing more sensitive and portable diagnostic tools for a range of diseases. These microfluidic devices streamline sample processing, improve diagnostic performance, and enable point-of-care applications, allowing for rapid and accurate detection of pathogens, genetic disorders, and other health conditions. The review discusses various CRISPR/Cas systems, including Cas9, Cas12, and Cas13, and their integration with microfluidic platforms. It also examines the advantages and limitations of these systems, highlighting their potential for detecting DNA and RNA biomarkers. The review also explores the key challenges in developing and implementing CRISPR-driven microfluidic diagnostics, such as ensuring robustness, minimizing cross-contamination, and achieving robust quantification. Finally, it highlights potential future directions for this rapidly evolving field, emphasizing the transformative potential of these technologies for personalized medicine and global health.
Subject(s)
CRISPR-Cas Systems , Microfluidics , CRISPR-Cas Systems/genetics , Humans , Microfluidics/methods , Pathology, Molecular/methods , Clustered Regularly Interspaced Short Palindromic Repeats/genetics , Molecular Diagnostic Techniques/methods , Gene Editing/methods , Lab-On-A-Chip DevicesABSTRACT
The emergence of new resistant bacterial strains is a worldwide challenge. A resistant bacterial population can emerge from a single cell that acquires resistance or persistence. Hence, new ways of tackling the mechanism of antibiotic response, such as single cell studies are required. It is necessary to see what happens at the single cell level, in order to understand what happens at the population level. To date, linking the heterogeneity of single-cell susceptibility to the population-scale response to antibiotics remains challenging due to the trade-offs between the resolution and the field of view. Here we present a platform that measures the ability of individual E. coli cells to form small colonies at different ciprofloxacin concentrations, by using anchored microfluidic drops and an image and data analysis pipelines. The microfluidic results are benchmarked against classical microbiology measurements of antibiotic susceptibility, showing an agreement between the pooled microfluidic chip and replated bulk measurements. Further, the experimental likelihood of a single cell to form a colony is used to provide a probabilistic antibiotic susceptibility curve. In addition to the probabilistic viewpoint, the microfluidic format enables the characterization of morphological features over time for a large number of individual cells. This pipeline can be used to compare the response of different bacterial strains to antibiotics with different action mechanisms.
Subject(s)
Anti-Bacterial Agents , Ciprofloxacin , Escherichia coli , Microbial Sensitivity Tests , Single-Cell Analysis , Anti-Bacterial Agents/pharmacology , Escherichia coli/drug effects , Single-Cell Analysis/methods , Microbial Sensitivity Tests/methods , Ciprofloxacin/pharmacology , Drug Resistance, Bacterial/drug effects , Microfluidics/methods , Microfluidic Analytical Techniques/methods , Lab-On-A-Chip DevicesABSTRACT
The evolution of food safety practices is crucial in addressing the challenges posed by a growing global population and increasingly complex food supply chains. Traditional methods are often labor-intensive, time-consuming, and susceptible to human error. This chapter explores the transformative potential of integrating microfluidics into smart food safety protocols. Microfluidics, involving the manipulation of small fluid volumes within microscale channels, offers a sophisticated platform for developing miniaturized devices capable of complex tasks. Combined with sensors, actuators, big data analytics, artificial intelligence, and the Internet of Things, smart microfluidic systems enable real-time data acquisition, analysis, and decision-making. These systems enhance control, automation, and adaptability, making them ideal for detecting contaminants, pathogens, and chemical residues in food products. The chapter covers the fundamentals of microfluidics, its integration with smart technologies, and its applications in food safety, addressing the challenges and future directions in this field.
Subject(s)
Food Safety , Microfluidics , Microfluidics/methods , Humans , Food Contamination/analysis , Artificial IntelligenceABSTRACT
Gelatin, a protein derivative from collagen, is a versatile material with promising applications in tissue engineering. Among the various forms of gelatin scaffolds, nanofibrous gelatin microspheres (NFGMs) are attracting research efforts due to their fibrous nature and injectability. However, current methods for synthesizing nanofibrous gelatin microspheres (NFGMs) have limitations, such as wide size distributions and the use of toxic solvents. To address these challenges, the article introduces a novel approach. First, it describes the creation of a microfluidic device using readily available supplies. Subsequently, it outlines a unique process for producing monodispersed NFGMs through a combination of the microfluidic device and thermally induced phase separation (TIPS). This innovative method eliminates the need for sieving and the use of toxic solvents, making it a more ecofriendly and efficient alternative.
Subject(s)
Gelatin , Microspheres , Nanofibers , Gelatin/chemistry , Nanofibers/chemistry , Tissue Engineering/methods , Microfluidics/methods , Microfluidics/instrumentation , Tissue Scaffolds/chemistry , Microfluidic Analytical Techniques/instrumentation , Microfluidic Analytical Techniques/methodsABSTRACT
The female reproductive system is essential to women's health, human reproduction and societal well-being. However, the clinical translation of traditional research models is restricted due to the uncertain effects and low efficiency. Emerging evidence shows that microfluidic chips provide valuable platforms for studying the female reproductive system, while no paper has ever comprehensively discussed the topic. Here, a total of 161 studies out of 14,669 records are identified in PubMed, Scopus, Web of Science, ScienceDirect and IEEE Xplore databases. Among these, 61 studies focus on oocytes, which further involves culture, cell surgeries (oocyte separation, rotation, enucleation, and denudation), evaluation and cryopreservation. Forty studies investigate embryo manipulation via microfluidic chips, covering in vitro fertilization, cryopreservation and functional evaluation. Forty-six studies reconstitute both the physiological and pathological statuses of in vivo organs, mostly involved in placenta and fetal membrane research. Fourteen studies perform drug screening and toxicity testing. In this review, we summarize the current application of microfluidic chips in studying the female reproductive system, the advancements in materials and methods, and discuss the future challenges. The present evidence suggests that microfluidic chips-assisted reproductive system reconstruction is promising and more studies are urgently needed.
Subject(s)
Lab-On-A-Chip Devices , Female , Humans , Animals , Microfluidics/methods , Oocytes/physiology , Cryopreservation/methods , Reproduction/physiology , Pregnancy , Reproductive Techniques, Assisted , Genitalia, Female/physiologyABSTRACT
One of the main goals of synthetic biology is to build artificial cells in a bottom-up manner, which not only facilitates the deep understanding of the origin of life and cell function but also plays a critical role in the research fields such as the development of artificial cell chassis, tissue models, engineering drug delivery systems, and drug screening tools. However, achieving this goal is extremely challenging. The complexity of cell structures and the miniaturization and diversity of basic modules pose high requirements for the construction methods. The microfluidic chip, as an advanced microanalysis system, serves as an effective tool for building artificial cells. It can accurately control the structure and local microenvironment of artificial cells, becoming the preferred approach for the current research on synthetic life. This article reviewed the methods of constructing, manipulating, and analyzed artificial cells based on microfluidic chips, emphasized the importance of the microenvironment for life systems and artificial self-sustaining systems. In addition, this article demonstrated the wide applications of artificial cells in multiple critical biomedical fields. Exploring the advantages, disadvantages, and application performance of different microfluidic methods can enrich our knowledge about artificial cell research. Finally, we made an outlook on the development of artificial cell research based on microfluidics, expecting that this field can achieve greater breakthroughs and progress.
Subject(s)
Artificial Cells , Synthetic Biology , Microfluidic Analytical Techniques , Microfluidics/methods , Lab-On-A-Chip DevicesABSTRACT
The complexity in structure and function of the nervous system, as well as its slow rate of regeneration, makes it more difficult to treat it compared to other tissues. Neural tissue engineering aims to create an appropriate environment for nerve cell proliferation and differentiation. Fibrous scaffolds with suitable morphology and topography and better mimicry of the extracellular matrix have been promising for the alignment and migration of neural cells. On this premise, to improve the properties of the scaffold, we combined montmorillonite (MMT) with chitosan (CS) polymer and created microfibers with variable diameters and varied concentrations of MMT using microfluidic technology and tested its suitability for the rat pheochromocytoma cell line (PC12). According to the findings, CS/MMT 0.1 % compared to CS/MMT 0 % microfibers showed a 201 MPa increase in Young's modulus, a 68 mS/m increase in conductivity, and a 1.4-fold increase in output voltage. Analysis of cell mitochondrial activity verified the non-toxicity, resulting in good cell morphology with orientation along the microfiber. Overall, the results of this project showed that with a low concentration of MMT, the properties of microfibers can be significantly improved and a suitable scaffold can be designed for neural tissue engineering.
Subject(s)
Bentonite , Chitosan , Neurons , Tissue Engineering , Tissue Scaffolds , Chitosan/chemistry , Animals , PC12 Cells , Tissue Engineering/methods , Rats , Bentonite/chemistry , Tissue Scaffolds/chemistry , Neurons/drug effects , Neurons/cytology , Cell Proliferation/drug effects , Microfluidics/methods , Cell Differentiation/drug effects , Elastic Modulus , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Cell Survival/drug effectsABSTRACT
Bacteria often thrive in surface-attached communities, where they can form biofilms affording them multiple advantages. In this sessile form, fluid flow is a key component of their environments, renewing nutrients and transporting metabolic products and signaling molecules. It also controls colonization patterns and growth rates on surfaces, through bacteria transport, attachment and detachment. However, the current understanding of bacterial growth on surfaces neglects the possibility that bacteria may modulate their division behavior as a response to flow. Here, we employed single-cell imaging in microfluidic experiments to demonstrate that attached Escherichia coli cells can enter a growth arrest state while simultaneously enhancing their adhesion underflow. Despite utilizing clonal populations, we observed a non-uniform response characterized by bistable dynamics, with co-existing subpopulations of non-dividing and actively dividing bacteria. As the proportion of non-dividing bacteria increased with the applied flow rate, it resulted in a reduction in the average growth rate of bacterial populations on flow-exposed surfaces. Dividing bacteria exhibited asymmetric attachment, whereas non-dividing counterparts adhered to the surface via both cell poles. Hence, this phenotypic diversity allows bacterial colonies to combine enhanced attachment with sustained growth, although at a reduced rate, which may be a significant advantage in fluctuating flow conditions.
Subject(s)
Bacterial Adhesion , Biofilms , Escherichia coli , Bacterial Adhesion/physiology , Escherichia coli/growth & development , Escherichia coli/physiology , Biofilms/growth & development , Phenotype , Microfluidics/methods , Surface Properties , Single-Cell Analysis , Cell DivisionABSTRACT
Trauma is the leading cause of death in individuals up to 45 years of age. Alterations in platelet function are a critical component of trauma-induced coagulopathy (TIC), yet these changes and the potential resulting dysfunction is incompletely understood. The lack of clinical assays available to explore platelet function in this patient population has hindered detailed understanding of the role of platelets in TIC. The objective of this study was to assess trauma patient ex vivo flow-dependent platelet hemostatic capacity in a microfluidic model. We hypothesized that trauma patients would have flow-regime dependent alterations in platelet function. Blood was collected from trauma patients with level I activations (N = 34) within 60 min of hospital arrival, as well as healthy volunteer controls (N = 10). Samples were perfused through a microfluidic model of injury at venous and arterial shear rates, and a subset of experiments were performed after incubation with fluorescent anti-CD41 to quantify platelets. Complete blood counts were performed as well as plasma-based assays to quantify coagulation times, fibrinogen, and von Willebrand factor (VWF). Exploratory correlation analyses were employed to identify relationships with microfluidic hemostatic parameters. Trauma patients had increased microfluidic bleeding times compared to healthy controls. While trauma patient samples were able to deposit a substantial amount of clot in the model injury site, the platelet contribution to microfluidic hemostasis was attenuated. Trauma patients had largely normal hematology and plasma-based coagulation times, yet had elevated D-Dimer and VWF. Venous microfluidic bleeding time negatively correlated with VWF, D-Dimer, and mean platelet volume (MPV), while arterial microfluidic bleeding time positively correlated with oxygenation. Arterial clot growth rate negatively correlated with red cell count, and positively with mean corpuscular volume (MCV). We observed changes in clot composition in trauma patient samples reflected by significantly diminished platelet contribution, which resulted in reduced hemostatic function in a microfluidic model of vessel injury. We observed a reduction in platelet clot contribution under both venous and arterial flow ex vivo in trauma patient samples. While our population was heterogenous and had relatively mild injury severity, microfluidic hemostatic parameters correlated with different patient-specific data depending on the flow setting, indicating potentially differential mechanistic pathways contributing to platelet hemostatic capacity in the context of TIC. These data were generated with the goal of identifying key features of platelet dysfunction in bleeding trauma patients under conditions of flow and to determine if these features correlate with clinically available metrics, thus providing preliminary surrogate markers of physiological platelet dysfunction to be further studied across larger cohorts. Future studies will continue to explore those relationships and further define mechanisms of TIC and their relationship with patient outcomes.
Subject(s)
Blood Platelets , Hemostasis , Microfluidics , Wounds and Injuries , Humans , Blood Platelets/metabolism , Male , Female , Adult , Wounds and Injuries/blood , Wounds and Injuries/complications , Microfluidics/methods , Middle Aged , Blood Coagulation Disorders/etiology , Blood Coagulation Disorders/blood , von Willebrand Factor/metabolism , Fibrinogen/metabolism , Case-Control Studies , Bleeding TimeABSTRACT
The capability to record data in passive, image-based wearable sensors can simplify data readouts and eliminate the requirement for the integration of electronic components on the skin. Here, we developed a skin-strain-actuated microfluidic pump (SAMP) that utilizes asymmetric aspect ratio channels for the recording of human activity in the fluidic domain. An analytical model describing the SAMP's operation mechanism as a wearable microfluidic device was established. Fabrication of the SAMP was achieved using soft lithography from polydimethylsiloxane (PDMS). Benchtop experimental results and theoretical predictions were shown to be in good agreement. The SAMP was mounted on human skin and experiments conducted on volunteer subjects demonstrated the SAMP's capability to record human activity for hundreds of cycles in the fluidic domain through the observation of a stable liquid meniscus. Proof-of-concept experiments further revealed that the SAMP could quantify a single wrist activity repetition or distinguish between three different shoulder activities.
Subject(s)
Skin , Wearable Electronic Devices , Humans , Dimethylpolysiloxanes/chemistry , Microfluidics/methods , Microfluidics/instrumentation , Lab-On-A-Chip Devices , Equipment Design , Monitoring, Physiologic/instrumentation , Monitoring, Physiologic/methodsABSTRACT
Pathogenic microorganisms play a crucial role in the global disease burden due to their ability to cause various diseases and spread through multiple transmission routes. Immunity tests identify antigens related to these pathogens, thereby confirming past infections and monitoring the host's immune response. Traditional pathogen detection methods, including enzyme-linked immunosorbent assays (ELISAs) and chemiluminescent immunoassays (CLIAs), are often labor-intensive, slow, and reliant on sophisticated equipment and skilled personnel, which can be limiting in resource-poor settings. In contrast, the development of microfluidic technologies presents a promising alternative, offering automation, miniaturization, and cost efficiency. These advanced methods are poised to replace traditional assays by streamlining processes and enabling rapid, high-throughput immunity testing for pathogens. This review highlights the latest advancements in microfluidic systems designed for rapid and high-throughput immunity testing, incorporating immunosensors, single molecule arrays (Simoas), a lateral flow assay (LFA), and smartphone integration. It focuses on key pathogenic microorganisms such as SARS-CoV-2, influenza, and the ZIKA virus (ZIKV). Additionally, the review discusses the challenges, commercialization prospects, and future directions to advance microfluidic systems for infectious disease detection.
Subject(s)
SARS-CoV-2 , Humans , SARS-CoV-2/immunology , SARS-CoV-2/isolation & purification , Microfluidics/methods , Microfluidics/instrumentation , COVID-19/immunology , COVID-19/diagnosis , COVID-19/virology , Microfluidic Analytical Techniques/instrumentation , Microfluidic Analytical Techniques/methods , Immunoassay/methods , Zika Virus/immunology , Lab-On-A-Chip Devices , Biosensing Techniques/methods , Influenza, Human/diagnosis , Influenza, Human/immunology , Zika Virus Infection/diagnosis , Zika Virus Infection/immunologyABSTRACT
Due to its high spatial resolution, Raman microspectroscopy allows for the analysis of single microbial cells. Since Raman spectroscopy analyzes the whole cell content, this method is phenotypic and can therefore be used to evaluate cellular changes. In particular, labeling with stable isotopes (SIPs) enables the versatile use and observation of different metabolic states in microbes. Nevertheless, static measurements can only analyze the present situation and do not allow for further downstream evaluations. Therefore, a combination of Raman analysis and cell sorting is necessary to provide the possibility for further research on selected bacteria in a sample. Here, a new microfluidic approach for Raman-activated continuous-flow sorting of bacteria using an optical setup for image-based particle sorting with synchronous acquisition and analysis of Raman spectra for making the sorting decision is demonstrated, showing that active cells can be successfully sorted by means of this microfluidic chip.
Subject(s)
Bacteria , Isotope Labeling , Spectrum Analysis, Raman , Spectrum Analysis, Raman/methods , Isotope Labeling/methods , Bacteria/metabolism , Flow Cytometry/methods , Microfluidics/methodsABSTRACT
BACKGROUND: Biomolecular condensation via liquid-liquid phase separation (LLPS) is crucial for orchestrating cellular activities temporospatially. Although the rheological heterogeneity of biocondensates and the structural dynamics of their constituents carry critical functional information, methods to quantitatively study biocondensates are lacking. Single-molecule fluorescence research can offer insights into biocondensation mechanisms. Unfortunately, as dense condensates tend to sink inside their dilute aqueous surroundings, studying their properties via methods relying on Brownian diffusion may fail. METHODS: We take a first step towards single-molecule research on condensates of Tau protein under flow in a microfluidic channel of an in-house developed microfluidic chip. Fluorescence correlation spectroscopy (FCS), a well-known technique to collect molecular characteristics within a sample, was employed with a newly commercialised technology, where FCS is performed on an array detector (AD-FCS), providing detailed diffusion and flow information. RESULTS: The AD-FCS technology allowed characterising our microfluidic chip, revealing 3D flow profiles. Subsequently, AD-FCS allowed mapping the flow of Tau condensates while measuring their burst durations through the stationary laser. Lastly, AD-FCS allowed obtaining flow velocity and burst duration data, the latter of which was used to estimate the condensate size distribution within LLPS samples. CONCLUSION: Studying biocondensates under flow through AD-FCS is promising for single-molecule experiments. In addition, AD-FCS shows its ability to estimate the size distribution in condensate samples in a convenient manner, prompting a new way of investigating biocondensate phase diagrams. GENERAL SIGNIFICANCE: We show that AD-FCS is a valuable tool for advancing research on understanding and characterising LLPS properties of biocondensates.
Subject(s)
Spectrometry, Fluorescence , tau Proteins , Spectrometry, Fluorescence/methods , tau Proteins/chemistry , tau Proteins/metabolism , Microfluidic Analytical Techniques/instrumentation , Microfluidic Analytical Techniques/methods , Microfluidics/methods , Lab-On-A-Chip Devices , Diffusion , HumansABSTRACT
Alzheimer's disease (AD) is a neurodegenerative pathologic entity characterized by the abnormal presence of tau and macromolecular Aß deposition that leads to the degeneration or death of neurons. In addition to that, glucose-6-phosphate dehydrogenase (G6PD) has a multifaceted role in the process of AD development, where it can be used as both a marker and a target. G6PD activity is dysregulated due to its contribution to oxidative stress, neuroinflammation, and neuronal death. In this context, the current review presents a vivid depiction of recent findings on the relationship between AD progression and changes in the expression or activity of G6PD. The efficacy of the proposed G6PD-based therapeutics has been demonstrated in multiple studies using AD mouse models as representative animal model systems for cognitive decline and neurodegeneration associated with this disease. Innovative therapeutic insights are made for the boosting of G6PD activity via novel innovative nanotechnology and microfluidics tools in drug administration technology. Such approaches provide innovative methods of surpassing the blood-brain barrier, targeting step-by-step specific neural pathways, and overcoming biochemical disturbances that accompany AD. Using different nanoparticles loaded with G6DP to target specific organs, e.g., G6DP-loaded liposomes, enhances BBB penetration and brain distribution of G6DP. Many nanoparticles, which are used for different purposes, are briefly discussed in the paper. Such methods to mimic BBB on organs on-chip offer precise disease modeling and drug testing using microfluidic chips, requiring lower sample amounts and producing faster findings compared to conventional techniques. There are other contributions to microfluid in AD that are discussed briefly. However, there are some limitations accompanying microfluidics that need to be worked on to be used for AD. This study aims to bridge the gap in understanding AD with the synergistic use of promising technologies; microfluid and nanotechnology for future advancements.
Subject(s)
Alzheimer Disease , Glucosephosphate Dehydrogenase , Nanoparticles , Alzheimer Disease/metabolism , Humans , Animals , Glucosephosphate Dehydrogenase/metabolism , Microfluidics/methodsABSTRACT
Emerging human pluripotent stem cell (hPSC)-based embryo models are useful for studying human embryogenesis. Particularly, there are hPSC-based somitogenesis models using free-floating culture that recapitulate somite formation. Somitogenesis in vivo involves intricately orchestrated biochemical and biomechanical events. However, none of the current somitogenesis models controls biochemical gradients or biomechanical signals in the culture, limiting their applicability to untangle complex biochemical-biomechanical interactions that drive somitogenesis. Herein, we develop a human somitogenesis model by confining hPSC-derived presomitic mesoderm (PSM) tissues in microfabricated trenches. Exogenous microfluidic morphogen gradients imposed on the PSM tissues cause axial patterning and trigger spontaneous rostral-to-caudal somite formation. A mechanical theory is developed to explain the size dependency between somites and the PSM. The microfluidic somitogenesis model is further exploited to reveal regulatory roles of cellular and tissue biomechanics in somite formation. This study presents a useful microengineered, hPSC-based model for understanding the biochemical and biomechanical events that guide somite formation.
Subject(s)
Microfluidics , Models, Biological , Pluripotent Stem Cells , Somites , Humans , Pluripotent Stem Cells/cytology , Pluripotent Stem Cells/metabolism , Somites/cytology , Somites/metabolism , Microfluidics/methods , Embryonic Development , Mesoderm/cytology , Cell DifferentiationABSTRACT
Archived patient-derived tissue specimens play a central role in understanding disease and developing therapies. To address specificity and sensitivity shortcomings of existing single-cell resolution proteoform analysis tools, we introduce a hybrid microfluidic platform (DropBlot) designed for proteoform analyses in chemically fixed single cells. DropBlot serially integrates droplet-based encapsulation and lysis of single fixed cells, with on-chip microwell-based antigen retrieval, with single-cell western blotting of target antigens. A water-in-oil droplet formulation withstands the harsh chemical (SDS, 6 M urea) and thermal conditions (98 °C, 1-2 hr) required for effective antigen retrieval, and supports analysis of retrieved protein targets by single-cell electrophoresis. We demonstrate protein-target retrieval from unfixed, paraformaldehyde-fixed (PFA), and methanol-fixed cells. Key protein targets (HER2, GAPDH, EpCAM, Vimentin) retrieved from PFA-fixed cells were resolved and immunoreactive. Relevant to biorepositories, DropBlot profiled targets retrieved from human-derived breast tumor specimens archived for six years, offering a workflow for single-cell protein-biomarker analysis of sparing biospecimens.