Harnessing three-dimensional porous chitosan microsphere embedded with adipose-derived stem cells to promote nerve regeneration.

BACKGROUND: Nerve guide conduits are a promising strategy for reconstructing peripheral nerve defects. Improving the survival rate of seed cells in nerve conduits is still a challenge and microcarriers are an excellent three-dimensional (3D) culture scaffold. Here, we investigate the effect of the 3D culture of microcarriers on the biological characteristics of adipose mesenchymal stem cells (ADSCs) and to evaluate the efficacy of chitosan nerve conduits filled with microcarriers loaded with ADSCs in repairing nerve defects. METHODS: In vitro, we prepared porous chitosan microspheres by a modified emulsion cross-linking method for loading ADSCs and evaluated the growth status and function of ADSCs. In vivo, ADSCs-loaded microcarriers were injected into chitosan nerve conduits to repair a 12 mm sciatic nerve defect in rats. RESULTS: Compared to the conventional two-dimensional (2D) culture, the prepared microcarriers were more conducive to the proliferation, migration, and secretion of trophic factors of ADSCs. In addition, gait analysis, neuro-electrophysiology, and histological evaluation of nerves and muscles showed that the ADSC microcarrier-loaded nerve conduits were more effective in improving nerve regeneration. CONCLUSIONS: The ADSCs-loaded chitosan porous microcarrier prepared in this study has a high cell engraftment rate and good potential for peripheral nerve repair.

Release mechanism and pharmacodynamics of entecavir micro spheres.

Entecavir, an effective anti-hepatitis B drug with low resistance rate, was designed as sustained-release micro spheres in our previous study. Here, we aimed to reveal the drug-release mechanism by observing the drug distribution and degradation behavior of poly (lactic-co-glycolic acid) and to investigate the pharmacodynamics of entecavir micro spheres. Raman spectroscopy was used to analyze the distribution of active pharmaceutical ingredients in the micro spheres. The results showed that there was little entecavir near the micro sphere surface. With increasing micro sphere depth, the drug distribution gradually increased and larger-size entecavir crystals were mainly distributed near the spherical center. The degradation behavior of poly (lactic-co-glycolic acid) was investigated using gel permeation chromatography. Changes in poly (lactic-co-glycolic acid) molecular weights during micro sphere degradation revealed that dissolution dominated the release process, which proved our previous research results. Pharmacodynamics studies on transgenic mice indicated that the anti-hepatitis B virus replication effect was maintained for 42 days after a single injection of entecavir micro spheres, similar to the effect of daily oral administration of entecavir tablets for 28 days. The entecavir micro spheres prepared in this study had a good anti-hepatitis B virus replication effect and it is expected to be used in anti hepatitis B virus treatment against hepatitis B virus.

Optimizing Process Parameters for Controlled Drug Delivery: A Quality by Design (QbD) Approach in Naltrexone Microspheres.

The formulation of microspheres involves a complex manufacturing process with multiple steps. Identifying the appropriate process parameters to achieve the desired quality attributes poses a significant challenge. This study aims to optimize the critical process parameters (CPPs) involved in the preparation of naltrexone microspheres using a Quality by Design (QbD) methodology. Additionally, the research aims to assess the drug release profiles of these microspheres under both in vivo and in vitro conditions. Critical process parameters (CPPs) and critical quality attributes (CQAs) were identified, and a Box-Behnken design was utilized to delineate the design space, ensuring alignment with the desired Quality Target Product Profile (QTPP). The investigated CPPs comprised polymer concentration, aqueous phase ratio to organic phase ratio, and quench volume. The microspheres were fabricated using the oil-in-water emulsion solvent extraction technique. Analysis revealed that increased polymer concentration was correlated with decreased particle size, reduced quench volume resulted in decreased burst release, and a heightened aqueous phase ratio to organic phase ratio improved drug entrapment. Upon analyzing the results, an optimal formulation was determined. In conclusion, the study conducted in vivo drug release testing on both the commercially available innovator product and the optimized test product utilizing an animal model. The integration of in vitro dissolution data with in vivo assessments presents a holistic understanding of drug release dynamics. The QbD approach-based optimization of CPPs furnishes informed guidance for the development of generic pharmaceutical formulations.

Rapid, on-site quantitative determination of mycotoxins in grains using a multiple time-resolved fluorescent microsphere immunochromatographic test strip.

The label probe plays a crucial role in enhancing the sensitivity of lateral flow immunoassays. However, conventional fluorescent microspheres (FMs) have limitations due to their short fluorescence lifetime, susceptibility to background fluorescence interference, and inability to facilitate multi-component detection. In this study, carboxylate-modified Eu(III)-chelate-doped polystyrene nanobeads were employed as label probes to construct a multiple time-resolved fluorescent microsphere-based immunochromatographic test strip (TRFM-ICTS). This novel TRFM-ICTS facilitated rapid on-site quantitative detection of three mycotoxins in grains: Aflatoxin B1 (AFB1), Zearalenone (ZEN), and Deoxynivalenol (DON). The limit of detection (LOD) for AFB1, ZEN, and DON were found to be 0.03 ng/g, 0.11 ng/g, and 0.81 ng/g, respectively. Furthermore, the TRFM-ICTS demonstrated a wide detection range for AFB1 (0.05-8.1 ng/g), ZEN (0.125-25 ng/g), and DON (1.0-234 ng/g), while maintaining excellent selectivity. Notably, the test strip exhibited remarkable stability, retaining its detection capability even after storage at 4 °C for over one year. Importantly, the detection of these mycotoxins relied solely on simple manual operations, and with a portable reader, on-site detection could be accomplished within 20 min. This TRFM-ICTS presents a promising solution for sensitive on-site mycotoxin detection, suitable for practical application in various settings due to its sensitivity, accuracy, simplicity, and portability.

Synthesis and active manipulation of magnetic liquid beads.

We report the fabrication and characterisation of magnetic liquid beads with a solid magnetic shell and liquid core using microfluidic techniques. The liquid beads consist of a fluorinated oil core and a polymer shell with magnetite particles. The beads are generated in a flow-focusing polydimethylsiloxane (PDMS) device and cured by photo polymerisation. We investigated the response of the liquid beads to an external magnetic field by characterising their motion towards a permanent magnet. Magnetic sorting of liquid beads in a channel was achieved with 90% efficiency. The results show that the liquid beads can be controlled magnetically and have potential applications in digital microfluidics including nucleic acid amplification, drug delivery, cell culture, sensing, and tissue engineering. The present paper also discusses the magnetophoretic behaviour of the liquid bead by varying its mass and magnetite concentration in the shell. We also demonstrated the two-dimensional self-assembly of magnetic liquid beads for potential use in digital polymerase chain reaction and digital loop mediated isothermal amplification.

Self-assembly mucoadhesive beads of κ-carrageenan/sericin for indomethacin oral extended release.

Oral drug administration, especially when composed of mucoadhesive delivery systems, has been a research trend due to increased residence time and contact with the mucosa, potentially increasing drug bioavailability and stability. In this context, this study aimed to develop self-assembly mucoadhesive beads composed of blends of κ-carrageenan and sericin (κ-Car/Ser) loaded with the anti-inflammatory drug indomethacin (IND). We investigated the swelling, adhesion behaviour, and mechanical/physical properties of the beads, assessing their effects on cell viability, safety and permeation characteristics in both 2D and triple-culture model. The swelling ratio of the beads indicated pH-responsiveness, with maximum water absorption at pH 6.8, and strong mucoadhesion, increasing primarily with higher polymer concentrations. The beads exhibited thermal stability and no chemical interaction with IND, showing improved mechanical properties. Furthermore, the beads remained stable during accelerated and long-term storage studies. The beads were found to be biocompatible, and IND encapsulation improved cell viability (>70 % in both models, 79 % in VN) and modified IND permeation through the models (6.3 % for F5 formulation (κ-Car 0.90 % w/v | Ser 1.2 % w/v| IND 3.0 g); 10.9 % for free IND, p < 0.05). Accordingly, κ-Car/Ser/IND beads were demonstrated to be a promising IND drug carrier to improve oral administration while mitigating the side effects of non-steroidal anti-inflammatories.

Chitosan for improved encapsulation of thyme aqueous extract in alginate-based microparticles.

Ionotropic gelation is a low-cost, easy and green microencapsulation technique. However, the encapsulation of highly soluble compounds is challenging because of the wide loss of material into the external water phase by passive diffusion and the consequent low encapsulation efficiency. In this work an important increase of encapsulation efficiency for Thymus vulgaris L. aqueous extract in alginate-based microparticles has been obtained. A formulation with the proper thyme extract/alginate ratio (30:70) was used as reference and then optimized by adding different co-carrier excipients. Microparticles obtained by dropping a solution containing thyme extract and alginate into a chitosan/calcium-chloride/acid acetic solution lead to a high encapsulation efficiency (70.43 ± 5.28 %). After drying, microparticles had a particle size of 1096 ± 72 µm, 20.087 ± 1.487 % of extract content, 6.2 % of residual water, and showed a complete release of thyme extract within one hour. Combining alginate and chitosan as polymeric co-carrier was a valuable option for efficiently encapsulating an aqueous extract by ionotropic gelation.

Supported Biomembrane Systems Incorporating Multiarm Polymers and Bioorthogonal Tethering.

To functionalize interfaces with supported biomembranes and membrane proteins, the challenge is to build stabilized and supported systems that mimic the native lipid microenvironment. Our objective is to control substrate-to-biomembrane spacing and the tethering chemistry so proteoliposomes can be fused and conjugated without perturbation of membrane protein function. Furthermore, the substrates need to exhibit low protein and antibody nonspecific binding to use these systems in assays. We have employed protein orthogonal coupling schemes in concert with multiarm poly(ethylene glycol) (PEG) technology to build supported biomembranes on microspheres. The lipid bilayer structures and tailored substrates of the microsphere-supported biomembranes were analyzed via flow cytometry, confocal fluorescence, and super-resolution imaging microscopy, and the lateral fluidity was quantified using fluorescence recovery after photobleaching (FRAP) techniques. Under these conditions, the 4-arm-PEG20,000-NH2 based configuration gave the most desirable tethering system based on lateral diffusivity and coverage.

Bradykinin protects nucleus pulposus cells from tert-butyl hydroperoxide-induced damage and delays intervertebral disc degeneration.

Intervertebral disc degeneration (IVDD) is a leading cause of degenerative spinal disorders, involving complex biological processes. This study investigates the role of the kallikrein-kinin system (KKS) in IVDD, focusing on the protective effects of bradykinin (BK) on nucleus pulposus cells (NPCs) under oxidative stress. Clinical specimens were collected, and experiments were conducted using human and rat primary NPCs to elucidate BK's impact on tert-butyl hydroperoxide (TBHP)-induced oxidative stress and damage. The results demonstrate that BK significantly inhibits TBHP-induced NPC apoptosis and restores mitochondrial function. Further analysis reveals that this protective effect is mediated through the BK receptor 2 (B2R) and its downstream PI3K/AKT pathway. Additionally, BK/PLGA sustained-release microspheres were developed and validated in a rat model, highlighting their potential therapeutic efficacy for IVDD. Overall, this study sheds light on the crucial role of the KKS in IVDD pathogenesis and suggests targeting the B2R as a promising therapeutic strategy to delay IVDD progression and promote disc regeneration.

Efficacy and Safety of Radiation Segmentectomy with 90Y Resin Microspheres for Hepatocellular Carcinoma.

Background Limited data are available on radiation segmentectomy (RS) for treatment of hepatocellular carcinoma (HCC) using yttrium 90 (90Y) resin microsphere doses determined by using a single-compartment medical internal radiation dosimetry (MIRD) model. Purpose To evaluate the efficacy and safety of RS treatment of HCC with 90Y resin microspheres using a single-compartment MIRD model and correlate posttreatment dose with outcomes. Materials and Methods This retrospective single-center study included adult patients with HCC who underwent RS with 90Y resin microspheres between July 2014 and December 2022. Posttreatment PET/CT and dosimetry were performed. Adverse events were assessed using the Common Terminology Criteria for Adverse Events, version 5.0. Per-lesion and overall response rates (ie, complete response [CR], objective response, disease control, and duration of response) were assessed at imaging using the Modified Response Evaluation Criteria in Solid Tumors, and overall survival (OS) was assessed using Kaplan-Meier analysis. Results Among 67 patients (median age, 69 years [IQR, 63-78 years]; 54 male patients) with HCC, median tumor absorbed dose was 232 Gy (IQR, 163-405 Gy). At 3 months, per-lesion and overall (per-patient) CR was achieved in 47 (70%) and 41 (61%) of 67 patients, respectively. At 6 months (n = 46), per-lesion rates of objective response and disease control were both 94%, and per-patient rates were both 78%. A total of 88% (95% CI: 79 99) and 72% (95% CI: 58, 90) of patients had a per-lesion and overall duration of response of 1 year or greater. At 1 month, a grade 3 clinical adverse event (abdominal pain) occurred in one of 67 (1.5%) patients. Median posttreatment OS was 26 months (95% CI: 20, not reached). Disease progression at 2 years was lower in the group that received 300 Gy or more than in the group that received less than 300 Gy (17% vs 61%; P = .047), with no local progression in the former group through the end of follow-up. Conclusion Among patients with HCC who underwent RS with 90Y resin microspheres, 88% and 72% achieved a per-lesion and overall duration of response of 1 year or greater, respectively, with one grade 3 adverse event. In patients whose tumors received 300 Gy or more according to posttreatment dosimetry, a disease progression benefit was noted. © RSNA, 2024 Supplemental material is available for this article.

LL37 Microspheres Loaded on Activated Carbon-chitosan Hydrogel: Anti-bacterial and Anti-toxin Wound Dressing for Chronic Wound Infections.

Antimicrobial peptide LL37 is a promising antibacterial candidate due to its potent antimicrobial activity with no known bacterial resistance. However, intrinsically LL37 is susceptible to degradation in wound fluids limits its effectiveness. Bacterial toxins which are released after cell lysis are found to hinder wound healing. To address these challenges, encapsulating LL37 in microspheres (MS) and loading the MS onto activated carbon (AC)-chitosan (CS) hydrogel. This advanced wound dressing not only protects LL37 from degradation but also targets bacterial toxins, aiding in the healing of chronic wound infections. First, LL37 MS and LL37-AC-CS hydrogel were prepared and characterised in terms of physicochemical properties, drug release, and peptide-polymer compatibility. Antibacterial and antibiofilm activity, bacterial toxin elimination, cell migration, and cell cytotoxicity activities were investigated. LL37-AC-CS hydrogel was effective against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. LL37-AC-CS hydrogel bound more endotoxin than AC with CS hydrogel alone. The hydrogel also induced cell migration after 72 h and showed no cytotoxicity towards NHDF after 72 h of treatment. In conclusion, the LL37-AC-CS hydrogel was shown to be a stable, non-toxic advanced wound dressing method with enhanced antimicrobial and antitoxin activity, and it can potentially be applied to chronic wound infections to accelerate wound healing.

Whey Protein Isolate as a Substrate to Design Calendula officinalis Flower Extract Controlled-Release Materials.

The use of natural active substances and the development of new formulations are promising directions in the cosmetic and pharmacy industries. The primary purpose of this research was the production of microparticles based on whey protein isolate (WPI) and calcium alginate (ALG) containing Calendula officinalis flower extract and their incorporation into films composed of gelatin, WPI, and glycerol. Both swollen and dry microparticles were studied by optical microscopy and their sizes were measured. Water absorption by the microparticles, their loading capacity, and the release profile of flower extract were also characterized. The films were analyzed by mechanical tests (Young's modulus, tensile strength, elongation at break), swelling capacity, contact angle, and moisture content measurements. The presented data showed that the active ingredient was successfully enclosed in spherical microparticles and completely released after 75 min of incubation at 37 °C. The incorporation of the microparticles into polymer films caused a decrease in stiffness and tensile strength, simultaneously increasing the ductility of the samples. Moreover, the films containing microparticles displayed higher swelling ability and moisture content compared to those without them. Hence, the materials prepared in this study with Calendula officinalis flower extract encapsulated into polymeric microspheres can be a starting point for the development of new products intended for skin application; advantages include protection of the extract against external factors and a controlled release profile.

A Magnetic Pincher for the Dynamic Measurement of the Actin Cortex Thickness in Live Cells.

The actin cortex is an essential element of the cytoskeleton allowing cells to control and modify their shape. It is involved in cell division and migration. However, probing precisely the physical properties of the actin cortex has proved to be challenging: it is a thin and dynamic material, and its location in the cell-directly under the plasma membrane-makes it difficult to study with standard light microscopy and cell mechanics techniques. In this chapter, we present a novel protocol to probe dynamically the thickness of the cortex and its fluctuations using superparamagnetic microbeads in a uniform magnetic field. A bead ingested by the cell and another outside the cell attract each other due to dipolar forces. By tracking their position with nanometer precision, one can measure the thickness of the cortex pinched between two beads and monitor its evolution in time. We first present the set of elements necessary to realize this protocol: a magnetic field generator adapted to a specific imaging setup and the aforementioned superparamagnetic microbeads. Then we detail the different steps of a protocol that can be used on diverse cell types, adherent or not.

Subconjunctival injection of rapamycin-loaded polymeric microparticles for effective suppression of noninfectious uveitis in rats.

Noninfective uveitis is a major cause of vision impairment, and corticosteroid medication is a mainstay clinical strategy that causes severe side effects. Rapamycin (RAPA), a potent immunomodulator, is a promising treatment for noninfective uveitis. However, because high and frequent dosages are required, it is a great challenge to implement its clinical translation for noninfective uveitis therapy owing to its serious toxicity. In the present study, we engineered an injectable microparticulate drug delivery system based on biodegradable block polymers (i.e., polycaprolactone-poly (ethylene glycol)-polycaprolactone, PCEC) for efficient ocular delivery of RAPA via a subconjunctival injection route and investigated its therapeutic efficacy in an experimental autoimmune uveitis (EAU) rat model. RAPA-PCEC microparticles were fabricated using the emulsion-evaporation method and thoroughly characterized using scanning electron microscopy, fourier transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry. The formed microparticles exhibited slow in vitro degradation over 28 days, and provided both in vitro and in vivo sustained release of RAPA over 4 weeks. Additionally, a single subconjunctival injection of PCEC microparticles resulted in high ocular tolerance. More importantly, subconjunctival injection of RAPA-PCEC microparticles significantly attenuated the clinical signs of EAU in a dose-dependent manner by reducing inflammatory cell infiltration (i.e., CD45+ cells and Th17 cells) and inhibiting microglial activation. Overall, this injectable microparticulate system may be promising vehicle for intraocular delivery of RAPA for the treatment of noninfective uveitis.

Dynamic monitoring soft tissue healing via visualized Gd-crosslinked double network MRI microspheres.

By integrating magnetic resonance-visible components with scaffold materials, hydrogel microspheres (HMs) become visible under magnetic resonance imaging(MRI), allowing for non-invasive, continuous, and dynamic monitoring of the distribution, degradation, and relationship of the HMs with local tissues. However, when these visualization components are physically blended into the HMs, it reduces their relaxation rate and specificity under MRI, weakening the efficacy of real-time dynamic monitoring. To achieve MRI-guided in vivo monitoring of HMs with tissue repair functionality, we utilized airflow control and photo-crosslinking methods to prepare alginate-gelatin-based dual-network hydrogel microspheres (G-AlgMA HMs) using gadolinium ions (Gd (III)), a paramagnetic MRI contrast agent, as the crosslinker. When the network of G-AlgMA HMs degrades, the cleavage of covalent bonds causes the release of Gd (III), continuously altering the arrangement and movement characteristics of surrounding water molecules. This change in local transverse and longitudinal relaxation times results in variations in MRI signal values, thus enabling MRI-guided in vivo monitoring of the HMs. Additionally, in vivo data show that the degradation and release of polypeptide (K2 (SL)6 K2 (KK)) from G-AlgMA HMs promote local vascular regeneration and soft tissue repair. Overall, G-AlgMA HMs enable non-invasive, dynamic in vivo monitoring of biomaterial degradation and tissue regeneration through MRI, which is significant for understanding material degradation mechanisms, evaluating biocompatibility, and optimizing material design.

Preparation of carboxyl-functionalized silica core-shell microspheres and their applications in weak cation exchange chromatography, heavy metal removal, and lysozyme enrichment.

Chromatography is a technique of separation based on adsorption and/or interaction of target molecules with stationary phases. Herein, we report the design and fabrication of BTDA@SiO2 core-shell microspheres as a new class of stationary phase and demonstrate its impressive performance for chromatographic separations. The silica microspheres of BTDA@SiO2 were synthesized by in situ method with 1,3,5-benzenetricarboxaldehyde and 3,5-diaminobenzoic to separate peptides and proteins on high-performance liquid chromatography. The BTDA@SiO2 core-shell structure has a high specific surface area and retention factor of 4.27 and 8.31 for anionic and cationic peptides, respectively. The separation factor and resolution were high as well. A typical chromatogram illustrated nearly baseline resolution of the two peptides in less than 3 min. The BTDA@SiO2 was also highly stable in the pH range of 1 to 14. Furthermore, the prepared BTDA@SiO2 core-shell material not only be used for chromatographic separation but also as heavy metal removal from water. Using a BTDA@SiO2, we also achieved a lysozyme enrichment with a maximum saturated adsorption capacity reaching 714 mg/g. In summary, BTDA@SiO2 has great application prospects and significance in separation and purification systems.

Gel microspheres enhance the stemness of ADSCs by regulating cell-ECM interaction.

The gel microsphere culture system (GMCS) showed various advantages for mesenchymal stem cell (MSC) expansion and delivery, such as high specific surface area, small and regular shape, extensive adjustability, and biomimetic properties. Although various technologies and materials have been developed to promote the development of gel microspheres, the differences in the biological status of MSCs between the GMCS and the traditional Petri dish culture system (PDCS) are still unknown, hindering gel microspheres from becoming a culture system as widely used as petri dishes. In the previous study, an excellent "all-in-one" GMCS has been established for the expansion of human adipose-derived MSCs (hADSCs), which showed convenient cell culture operation. Here, we performed transcriptome and proteome sequencing on hADSCs cultured on the "all-in-one" GMCS and the PDCS. We found that hADSCs cultured in the GMCS kept in an undifferentiation status with a high stemness index, whose transcriptome profile is closer to the adipose progenitor cells (APCs) in vivo than those cultured in the PDCS. Further, the high stemness status of hADSCs in the GMCS was maintained through regulating cell-ECM interaction. For application, bilayer scaffolds were constructed by osteo- and chondro-differentiation of hADSCs cultured in the GMCS and the PDCS. The effect of osteochondral regeneration of the bilayer scaffolds in the GMCS group was better than that in the PDCS group. This study revealed the high stemness and excellent functionality of MSCs cultured in the GMCS, which promoted the application of gel microspheres in cell culture and tissue regeneration.

Cartilage tissue engineering using decellularized biomatrix hydrogel containing TGF-ß-loaded alginate microspheres in mechanically loaded bioreactor.

Physiochemical tissue inducers and mechanical stimulation are both efficient variables in cartilage tissue fabrication and regeneration. In the presence of biomolecules, decellularized extracellular matrix (ECM) may trigger and enhance stem cell proliferation and differentiation. Here, we investigated the controlled release of transforming growth factor beta (TGF-ß1) as an active mediator of mesenchymal stromal cells (MSCs) in a biocompatible scaffold and mechanical stimulation for cartilage tissue engineering. ECM-derived hydrogel with TGF-ß1-loaded alginate-based microspheres (MSs) was created to promote human MSC chondrogenic development. Ex vivo explants and a complicated multiaxial loading bioreactor replicated the physiological conditions. Hydrogels with/without MSs and TGF-ß1 were highly cytocompatible. MSCs in ECM-derived hydrogel containing TGF-ß1/MSs showed comparable chondrogenic gene expression levels as those hydrogels with TGF-ß1 added in culture media or those without TGF-ß1. However, constructs with TGF-ß1 directly added within the hydrogel had inferior properties under unloaded conditions. The ECM-derived hydrogel group including TGF-ß1/MSs under loading circumstances formed better cartilage matrix in an ex vivo osteochondral defect than control settings. This study demonstrates that controlled local delivery of TGF-ß1 using MSs and mechanical loading is essential for neocartilage formation by MSCs and that further optimization is needed to prevent MSC differentiation towards hypertrophy.

Spray-dried ternary bioactive glass microspheres: Direct and indirect structural effects of copper-doping on acellular degradation behavior.

Silicate-based bioactive glass nano/microspheres hold significant promise for bone substitution by facilitating osteointegration through the release of biologically active ions and the formation of a biomimetic apatite layer. Cu-doping enhances properties such as pro-angiogenic and antibacterial behavior. While sol-gel methods usually yield homogeneous spherical particles for pure silica or binary glasses, synthesizing poorly aggregated Cu-doped ternary glass nano/microparticles without a secondary CuO crystalline phase remains challenging. This article introduces an alternative method for fabricating Cu-doped ternary microparticles using sol-gel chemistry combined with spray-drying. The resulting microspheres exhibit well-defined, poorly aggregated particles with spherical shapes and diameters of a few microns. Copper primarily integrates into the microspheres as Cu0 nanoparticles and as Cu2+ within the amorphous network. This doping affects silica network connectivity, as calcium and phosphorus are preferentially distributed in the glass network (respectively as network modifiers and formers) or involved in amorphous calcium phosphate nano-domains depending on the doping rate. These differences affect the interaction with simulated body fluid. Network depolymerization, ion release (SiO44-, Ca2+, PO43-, Cu2+), and apatite nanocrystal layer formation are impacted, as well as copper release. The latter is mainly provided by the copper involved in the silica network and not from metal nanoparticles, most of which remain in the microspheres after interaction. This understanding holds promising implications for potential therapeutic applications, offering possibilities for both short-term and long-term delivery of a tunable copper dose. STATEMENT OF SIGNIFICANCE: A novel methodology, scalable to industrial levels, enables the synthesis of copper-doped ternary bioactive glass microparticles by combining spray-drying and sol-gel chemistry. It provides precise control over the copper percentage in microspheres. This study explores the influence of synthesis conditions on the copper environment, notably Cu0 and Cu2+ ratios, characterized by EPR spectroscopy, an aspect poorly described for copper-doped bioactive glass. Additionally, copper indirectly affects silica network connectivity and calcium/phosphorus distribution, as revealed by SSNMR. Multiscale characterization illustrates how these features impact acellular degradation in simulated body fluid, highlighting the therapeutic potential for customizable copper dosing to address short- and long-term needs.

Effects of phantom microstructure on their optical properties.

Significance: Developing stable, robust, and affordable tissue-mimicking phantoms is a prerequisite for any new clinical application within biomedical optics. To this end, a thorough understanding of the phantom structure and optical properties is paramount. Aim: We characterized the structural and optical properties of PlatSil SiliGlass phantoms using experimental and numerical approaches to examine the effects of phantom microstructure on their overall optical properties. Approach: We employed scanning electron microscope (SEM), hyperspectral imaging (HSI), and spectroscopy in combination with Mie theory modeling and inverse Monte Carlo to investigate the relationship between phantom constituent and overall phantom optical properties. Results: SEM revealed that microspheres had a broad range of sizes with average (13.47±5.98) µm and were also aggregated, which may affect overall optical properties and warrants careful preparation to minimize these effects. Spectroscopy was used to measure pigment and SiliGlass absorption coefficient in the VIS-NIR range. Size distribution was used to calculate scattering coefficients and observe the impact of phantom microstructure on scattering properties. The results were surmised in an inverse problem solution that enabled absolute determination of component volume fractions that agree with values obtained during preparation and explained experimentally observed spectral features. HSI microscopy revealed pronounced single-scattering effects that agree with single-scattering events. Conclusions: We show that knowledge of phantom microstructure enables absolute measurements of phantom constitution without prior calibration. Further, we show a connection across different length scales where knowledge of precise phantom component constitution can help understand macroscopically observable optical properties.