An open source 3-d printed modular micro-drive system for acute neurophysiology.

Current, commercial, electrode micro-drives that allow independent positioning of multiple electrodes are expensive. Custom designed solutions developed by individual laboratories require fabrication by experienced machinists working in well equipped machine shops and are therefore difficult to disseminate into widespread use. Here, we present an easy to assemble modular micro-drive system for acute primate neurophysiology (PriED) that utilizes rapid prototyping (3-d printing) and readily available off the shelf-parts. The use of 3-d printed parts drastically reduces the cost of the device, making it available to labs without the resources of sophisticated machine shops. The direct transfer of designs from electronic files to physical parts also gives researchers opportunities to easily modify and implement custom solutions to specific recording needs. We also demonstrate a novel model of data sharing for the scientific community: a publicly available repository of drive designs. Researchers can download the drive part designs from the repository, print, assemble and then use the drives. Importantly, users can upload their modified designs with annotations making them easily available for others to use.

Arduino: a low-cost multipurpose lab equipment.

Typical experiments in psychological and neurophysiological settings often require the accurate control of multiple input and output signals. These signals are often generated or recorded via computer software and/or external dedicated hardware. Dedicated hardware is usually very expensive and requires additional software to control its behavior. In the present article, I present some accuracy tests on a low-cost and open-source I/O board (Arduino family) that may be useful in many lab environments. One of the strengths of Arduinos is the possibility they afford to load the experimental script on the board's memory and let it run without interfacing with computers or external software, thus granting complete independence, portability, and accuracy. Furthermore, a large community has arisen around the Arduino idea and offers many hardware add-ons and hundreds of free scripts for different projects. Accuracy tests show that Arduino boards may be an inexpensive tool for many psychological and neurophysiological labs.

Low-cost, high-fidelity, adaptive cancellation of periodic 60 Hz noise.

A common method to eliminate unwanted power line interference in neurobiology laboratories where sensitive electronic signals are measured is with a notch filter. However a fixed-frequency notch filter cannot remove all power line noise contamination since inherent frequency and phase variations exist in the contaminating signal. One way to overcome the limitations of a fixed-frequency notch filter is with adaptive noise cancellation. Adaptive noise cancellation is an active approach that uses feedback to create a signal that when summed with the contaminated signal destructively interferes with the noise component leaving only the desired signal. We have implemented an optimized least mean square adaptive noise cancellation algorithm on a low-cost 16 MHz, 8-bit microcontroller to adaptively cancel periodic 60 Hz noise. In our implementation, we achieve between 20 and 25 dB of cancellation of the fundamental 60 Hz noise component.

Contabilidad de costes basada en la actividad es de un Servicio de Neurofisiología Clínica / Cost accounting based on the activities of a Clinical Neurophysiological Service

Se ha realizado una aproximación al coste de cada producto de la cartera de servicios del Servicio de Neuro fisiología Clínica del Hospital Regional Universitario Carlos Haya de Malaga, para un periodo annual, con el fin de disponer de informació detallada para la autogestión del presupuesto de dicho Servicio. El estudio se compone de dos etapas: la primera, centrada en la definición de las Unidades Relativas de Valor de las actividades de los Servicios de Neurofisiología Clínica de la Comunidad Autónoma de Andalcía; y la segunda, expuesta en este trabajo, calcula el cose por Unidad Relativa de Valor y determina los precios de los productos ofertados por el Servicio de Neurofisiología Clínica de nuestro cenro. El propósito de este trabajo es poner de manifiesto una forma de valorar las actividades desarroladas por un Servicio de Neurofisiología Clínica y sus concluisones para debatir sobre la autogestión de estos Servicios, cuestión cada vez de mayor actualidad (AU)

The purpose of this work is to highlight a way to value the activities developed for a Clinical Neurophysiological Service and its conclusions in order to debate about the self-management of these services (AU)

A simple and inexpensive light source for research in visual neuroscience.

Investigating the properties of light responsive neurons and their networks requires appropriate control of stimulus parameters, such as intensity, spectral composition, spatial and temporal profile. In the present paper, we describe how to build a simple, versatile and low-cost light source for use in visual neuroscience. The light source is a InGaN-based ultrabright light-emitting diode (LED), which may generate conventional light flashes as well as a variety of time varying stimuli to be used in quantitative studies of the visual system. In particular, with this instrument one may generate light stimuli sinusoidally modulated in time at frequencies ranging from 0.05 to 50 Hz, with less than 1% harmonic distortion at a contrast exceeding 85%. The relationship between applied voltage and energy emitted by the source is linear over an intensity range that exceeds 4.5 log-units, up to the full suppression of the light-sensitive currents in mammalian rods. The light source has minimal space requirement and does not generate appreciable radiating heat and hum, allowing its use for single cell work "in vitro" as well as for "in vivo" recording of the electroretinogram (ERG).

Unraveling the barriers to reconceptualization of the problem in chronic pain: the actual and perceived ability of patients and health professionals to understand the neurophysiology.

To identify why reconceptualization of the problem is difficult in chronic pain, this study aimed to evaluate whether (1) health professionals and patients can understand currently accurate information about the neurophysiology of pain and (2) health professionals accurately estimate the ability of patients to understand the neurophysiology of pain. Knowledge tests were completed by 276 patients with chronic pain and 288 professionals either before (untrained) or after (trained) education about the neurophysiology of pain. Professionals estimated typical patient performance on the test. Untrained participants performed poorly (mean +/- standard deviation, 55% +/- 19% and 29% +/- 12% for professionals and patients, respectively), compared to their trained counterparts (78% +/- 21% and 61% +/- 19%, respectively). The estimated patient score (46% +/- 18%) was less than the actual patient score (P <.005). The results suggest that professionals and patients can understand the neurophysiology of pain but professionals underestimate patients' ability to understand. The implications are that (1) a poor knowledge of currently accurate information about pain and (2) the underestimation of patients' ability to understand currently accurate information about pain represent barriers to reconceptualization of the problem in chronic pain within the clinical and lay arenas.

Tools for physiology labs: an inexpensive high-performance amplifier and electrode for extracellular recording.

The cost of electronic equipment can be a critical barrier to including neurophysiology exercises in biology teaching programs. We describe the construction of a simple and inexpensive AC preamplifier with performance comparable to that of commercial products. The amplifier consists of two integrated circuits in five stages: differential input, fixed gain, variable gain (100 or 1000), low-pass filter (5 or 20 kHz), and 50 or 60 Hz notch filter. We compared our amplifier with two commercial units, the A-M Systems Model 1700 and the Grass P15. The quality of extracellular recording from a typical student preparation (spontaneously active crayfish motor nerve) was the same for all three amplifiers, although our amplifier has slightly higher internal noise than the P15 and slightly lower common-mode rejection than the 1700 and P15. In addition, we describe a simple suction electrode for extracellular nerve recording. It is easily constructed from readily available materials and uses a disposable plastic pipette tip, instead of the traditional glass tip, to contact the nerve. This tip is easily replaced if broken or clogged, and can be adapted to different recording conditions by selecting a different tip size or stretching the plastic. Development of this equipment is part of an ongoing project to promote neuroscience education by expanding the neurophysiology options available to laboratory instructors.