An enhanced non-enzymatic electrochemical sensor based on the Bi2S3-TiO2 nanocomposite with HNTs for the individual and simultaneous detection of 4-nitrophenol and nitrofurantoin in environmental samples.

In the current era of rapid population growth, there has been an increase in resource consumption and the subsequent release of organic pollutants into water bodies by various industries. To address this issue, we have developed a nanocomposite material, Bi2S3-TiO2/HNTs, for electrochemical sensors capable of simultaneously detecting nitrofurantoin (NFT) and 4-nitrophenol (4-NP) contaminants. The nanocomposite material was synthesized using a novel one-pot sol-gel method, and its structural morphology was characterized using techniques such as FE-SEM, FT-IR, HR-TEM, and XRD. The electrochemical sensor exhibited a remarkably low limit of detection (3.2 nM for NFT and 3.5 nM for 4-NP) and a wide concentration range from 0 µM to 260 µM for both NFT and 4-NP, demonstrating their high sensitivity and accuracy for pollutant detection, and furthermore its potential for real-world application was assessed considering pond and tap water as real samples.

Including the rare cubane cluster cobalt coordination polymer as the fluorescent sensing material for selectively and sensitively detecting the nitrofurantoin antibiotic.

More and more attention has been paid to food safety. Due to the overuse and misuse of antibiotics, the problem of antibiotic residues in animal food is one of the important challenges to ensure food safety. The development of a feasible strategy to detect antibiotic residues in animal food has become desirable. In this paper, we creatively synthesize a water-stable fluorescence sensing material, namely, Co(Ⅱ)-Coordination polymer [Co2(CA) (L)0.5 (H2O)3] n (L = 1,4-bis(imidazole-1-ylmethyl) benzene, CA= Citric acid). The single crystal X-ray diffraction shows that it crystallizes in tetragonal space group I-4. It is worth mentioning that there exists the rare Co4(µ3-O)4 cubane cluster structure and Co8 cluster units. Those adjacent Co8 cluster units are connected into an infinite two-dimensional net structure by four flexible bridged L ligands. Finally, the Co(Ⅱ)-Coordination polymer (CP) further develops into the three-dimensional supramolecular structure via the hydrogen bonds of O-H⋯O and C-H⋯O. It could selectively detect the antibiotic-nitrofurantoin (NFT) residue by way of fluorescence quenching, Co-CP for the detection of NFT shows broad linearity from 0 to 200 µM, with a detection limit of 0.13 µM and strong anti-interference ability. It is used to detect the NFT residual of tap water and milk with a spiked recovery of 86.35-112.47 %.

An ultrasensitive electrochemical sensor based on NiFe-LDH-MXene and ruthenium nanoparticles composite for detection of nitrofurantoin in food samples.

The excessive use of nitrofurantoin (NFT) represents a threat to ecosystems and food safety, making it necessary to develop efficient and accurate detection methods. Herein, the Ru/NiFe-LDH-MXene/SPCE electrode was successfully synthesized by one-step electrodeposition and employed to the NFT electrochemical sensing. Combining 2D MXenes with multifunctional 2D layered double hydroxides (LDHs) creates synergistic interactions within the MXene-LDH heterostructures, modifying the electrochemical performance. Furthermore, the incorporation of noble metal nanoparticles and nanoclusters can significantly enhance electrochemical performance by promoting favorable interactions at the metal-carrier interface and optimizing the rearrangement of electronic structure. Based on this, the developed Ru/NiFe-LDH-MXene/SPCE sensor demonstrates remarkable sensitivity (152.44 µA µM-1 cm-2) and an ultralow detection limit (2.2 nM). Notably, the sensor was employed for NFT detection in food samples with satisfactory recoveries, making it a promising electrochemical sensor for the detection of NFT.

Preparation of high-affinity and high-specificity monoclonal antibody and development of ultra-sensitive immunoassay for the detection of 1-aminohydantoin, the metabolite of nitrofurantoin.

1-Aminohydantoin (AHD), the residual marker of nitrofurantoin, is usually detected after derivatisation using the derivatisation reagent 2-nitrobenzaldehyde. Avoiding the antibody recognition of the derivatisation reagent is essential for the accurate detection of AHD residues. In this paper, a novel hapten called hapten D was designed, and then, a monoclonal antibody that did not recognise 2-nitrobenzaldehyde was prepared based on this novel hapten. An ultra-sensitive indirect competitive enzyme linked-immunosorbent assay (icELISA) was established under optimal conditions. The 50% inhibition concentration and limit of detection of AHD were 0.056 and 0.0060 ng/mL, respectively, which improved the sensitivity by 9-37-fold compared with the previously reported icELISA methods. The average recovery rates were 88.1%-97.3%, and the coefficient of variation was <8.6%. The accuracy and reliability of the icELISA were verified using liquid chromatography-tandem mass spectrometry. These results demonstrated that the developed icELISA is a useful and reliable tool.

Composite of a Stabilizer-Free Trimetallic Prussian Blue Analogue (PBA) and Polyaniline (PANI) on 3D Porous Nickel Foam for the Detection of Nitrofurantoin in Biological Fluids.

Herein, a facile and highly effective nonenzymatic electrochemical sensing system is designed for the detection of the antibacterial drug nitrofurantoin (NFT). This electrocatalyst is a combination of a trimetallic Prussian blue analogue and conductive polyaniline coated onto a three-dimensional porous nickel foam substrate. A comprehensive set of physicochemical analyses have verified the successful synthesis. The fabricated electrochemical sensor exhibits an impressively low limit of detection (0.096 nM) and quantification (0.338 nM, S/N = 3.3), coupled with a wide linear range spanning from 0.1 nM to 5 mM and a sensitivity of 13.9 µA nM-1 cm-2. This excellent performance is attributed to the collaborative effects of conducting properties of polyaniline (PANI) and the remarkable redox behavior of the Prussian blue analogue (PBA). When both are integrated into the nickel foam, they create a significantly enlarged surface area with numerous catalytic active sites, enhancing the sensor's efficiency. The sensor demonstrates a high degree of specificity for NFT, while effectively minimizing responses to potential interferences such as flutamide, ascorbic acid, glucose, dopamine, uric acid, and nitrophenol, even when present in 2-3-fold higher concentrations. Moreover, to validate its practical utility, the sensor underwent real sample analysis using synthetic urine, achieving outstanding recovery rates of 118 and 101%.

A Fluorescent Zn(II)-Coordination Polymer: Selective Detection of Nitrofurantoin and Prevention of Peri-Implantitis after Ultrafine-Grained Titanium Implant by Reducing Inflammatory Cytokines Release.

In the current research, a novel coordination polymer (CP) containing Zn(II) ions as nodes with the chemical formula of [Zn(IPT)2]n (1) has been produced via reaction of Zn(NO3)2·6H2O with 5-(3-(1H-imidazol-1-yl)phenyl)-1H-tetrazolate (HIPT), a heterotopic imidazole-tetrazole-bifunctional ligand. The as-prepared complex 1 has been charactered via single crystal X-ray diffraction, elemental analysis, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA) and fourier transform infrared spectroscopy (FT-IR). Because of its outstanding luminescent performances and stability, the synthesized complex 1 is a kind of excellent material of luminescent sensor of nitrofurantoin (NFT) in the water. The value of Ksv for the complex 1 to NFT is about 1.4 × 104 M-1. For the treatment of the peri-implantitis with complex 1, the ELISA test was carried out to determine the levels of the inflammatory cytokines released into the gingival crevicular fluid. The results showed that the levels of the inflammatory cytokines could be significantly reduced by complex 1 treatment. In addition to this, the real time RT-PCR was also conducted, and the data suggested the signaling pathway of TLR-4-NF-κB activation was inhibited by complex 1.

Robust and selective electrochemical detection of antibiotic residues: The case of integrated lutetium vanadate/graphene sheets architectures.

Lutetium vanadate (LuVO4) is a promising material for electrochemical application owing to its good conductivity and electrocatalytic activity. Herein, we demonstrate a facile technique for the synthesis of a LuVO4/ graphene sheet (GRS) nanocomposite where LuVO4 is encapsulated with an ultrathin GRS to form a hierarchical structure (LuVO4/GRS). The resulting hierarchical LuVO4/GRS architecture was characterized by several analytical and spectroscopic techniques. The resultant electrocatalyst shows superior electrochemical sensing for nitrofurantoin (NFT) with a low detection limit (0.001 µM), wide linear range (0.008-256.0 µM) and excellent sensitivity (1.709 µA µM-1 cm-2). It has been demonstrated that the enhanced electrocatalytic performance of LuVO4/GRS nanocomposite is due to their excellent electrical conductivity, suitable surface area, high redox reaction and large number of electron transport. In addition, the LuVO4/GRS nanocomposite exhibited excellent response towards NFT detection with adequate reproducibility, good repeatability, long-term stability and excellent selectivity over its structural analogs and common interferents. Furthermore, the practical applicability of the proposed electrochemical sensor was successfully applied for determination of NFT in environmental samples with satisfactory results. The LuVO4/GRS nanocomposite presented here can serve as a favorable candidate for developing electrochemical sensor and plays an important role in widespread fields.

Complete validation according to current international criteria of a confirmatory quantitative method for the determination of nitrofuran metabolites in seafood by liquid chromatography isotope dilution tandem mass spectrometry.

Despite the ban of nitrofurans (NFs) for use in food production in many countries in the 1990s, NF metabolites in food are still regularly detected during import control testing. We have developed a confirmatory routine method for the detection and quantification of NF metabolites in seafood using LC-MS/MS and validated the method according to the strict criteria in European legislation and Codex Alimentarius. Method characteristics were found to fulfill the criteria. We report for the first time a new false positive for 1-amino-2,4-imidazolidinedione (AHD), the metabolite of Nitrofurantoin (NFT). By using optimized washing procedures, the non tissue bound false positives can be minimized. The results from the validation on both lean and fatty fish and crustaceans, results from proficiency tests and routine use over many years, demonstrates that the method is fit for purpose to determine NF metabolites in the seafood category.

Nitrofurantoin in sediments and soils: Sorption, isotherms and kinetics.

Nitrofurantoin is nitrofuran antibacterial drug that is most used as a veterinary pharmaceutic compound. This compound, as well as other pharmaceuticals can greatly affect the environment, the soil and organisms in it and pollute aquatic ecosystems. Since it has been used for only a few decades, knowledge of their fate and behaviour in the environment is still limited. Because of that, the aim of this study was to experimentally determine the Kd values of nitrofurantoin in seven different natural soil and seven different sediment samples with different physico-chemical properties. Sorption phenomena were described with Linear, Freundlich and Dubinin-Radushkevich sorption isotherms. Obtained sorption coefficients (Kd) ranged from 3.967 to 5.121 mLg-1 for sediment samples and 3.634-43.06 mL g-1 for soil samples. The influence of ionic strength and pH of the nitrofurantoin solution and kinetics of the sorption and desorption process were also investigated. Results show that an increase in ionic strength and pH reduces the values of sorption coefficient while the mechanism of nitrofurantoin sorption is the best described with the kinetic model of pseudo-second order.

Ultrasonic energy-assisted preparation of ß-cyclodextrin-carbon nanofiber composite: Application for electrochemical sensing of nitrofurantoin.

A simple ultrasonic energy assisted synthesis of ß-cyclodextrin (ß-CD) supported carbon nanofiber composite (CNF) and its potential application in electrochemical sensing of antibiotic nitrofurantoin (NFT) is reported. The elemental composition and surface morphology of the ß-CD/CNF composite was validated through Field emission scanning electron microscopy, energy dispersive X-ray microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The uniform enfolding of hydrophilic ß-CD over CNF enhance the aqueous dispersion and offer abundant active surface to the ß-CD/CNF composite. Further, the electrocatalytic efficacy of the ß-CD/CNF composite is utilized to fabricate an electrochemical sensor for the high sensitive quantitative detection of NFT. Under optimized analytical conditions, the sensor displays a broad working range of 0.004-308 µM and calculated detection limit of 1.8 nM, respectively. In addition, the sensor showcased a good selectivity, storage, and working stability, with amiable reproducibility. The point-of-care applicability of the sensor was demonstrated with NFT spiked human blood serum and urine sample with reliable analytical performance. The simple, cost-effective NFT sensor based on ß-CD/CNF offered outstanding analytical performance in real-world samples with higher reliability.

Anhydrate to hydrate solid-state transformations of carbamazepine and nitrofurantoin in biorelevant media studied in situ using time-resolved synchrotron X-ray diffraction.

Transformation of the solid-state form of a drug compound in the lumen of the gastrointestinal tract may alter the drug bioavailability and in extreme cases result in patient fatalities. The solution-mediated anhydrate-to-hydrate phase transformation was examined using an in vitro model with different biorelevant media, simulated fasted and fed state intestinal fluids containing bile salt and dioleoylphosphatidylcholine (DOPC) micelles, DOPC/sodium dodecyl sulfate (SDS) mixture, bile salt solution and water. Two anhydrate compounds (carbamazepine, CBZ and nitrofurantoin, NF) with different overall transformation time into hydrate form were used as model compounds. The transformations were monitored using direct structural information from time-resolved synchrotron X-ray diffraction. The kinetics of these transformations were estimated using multivariate data analysis (principal component analysis, PCA) and compared to those for nitrofurantoin (NF). The study showed that the solution-mediated phase transformation of CBZ anhydrate was remarkably faster in the DOPC/SDS medium compared to transformation in all the other aqueous dispersion media. The conversion time for CBZ anhydrate in water was shorter than for DOPC/SDS but still faster than the conversion seen in fed and fasted state micellar media. The conversion of CBZ anhydrate to hydrate was the slowest in the solution containing bile salt alone. In contrast, the solution-mediated phase transformations of NF did only show limited kinetic dependence on the dispersion media used, indicating the complexity of the nucleation process. Furthermore, when the CBZ and NF material was compacted into tablets the transformation times were remarkably slower. Results suggest that variations in the composition of the contents of the stomach/gut may affect the recrystallization kinetics, especially when investigating compounds with relatively fast overall transformation time, such as CBZ.

Foreign matter identification from solid dosage forms.

Despite the increased request for robust quality systems, the end product may contain unidentified defects or discoloured regions. The foreign matter has to be monitored, identified and its source defined in order to prevent further contamination. However, the identification task can be complicated, since the origin and nature of foreign matter are various. The aim of this study is to provide an efficient foreign matter identification procedure for various substances possibly originating from pharmaceutical manufacturing environment. The surface or cross-section of the uncoated and coated tablets was analysed by utilization of different analytical techniques, such as light microscopy (LM), scanning electron microscopy in combination with energy dispersive X-ray microanalysis (SEM/EDX), Fourier transform infrared spectroscopy (FT-IR) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results indicate that the combination of different analytical techniques proved to be a powerful approach in foreign matter identification. Light microscopy and SEM generate information on the morphology of foreign matter particles. EDX provides elemental analysis, which most often serves as final confirmation of the identification. However, FT-IR can be used to obtain information on the compounds chemical structure and conformation, and ToF-SIMS provides sensitivity in cases, where the entire solid dosage form is contaminated with foreign matter.

[Spectral analysis of nitrofurantoin in the terahertz frequency range].

The present article measured the absorption coefficient spectra and refractive index spectra of nitrofurantoin original drug, which is one kind of nitrofuran drugs, in the terahertz frequency range from 0.2 to 1.8 THz using terahertz time-domain spectroscopy. The results showed that there exist a number of characteristic absorption peaks of nitrofurantoin with different intensity in the range and the absorption coefficient spectra can be used to identify nitrofurantoin. The article also simulated absorption coefficient spectra of nitrofurantoin molecule within 0.2 - 1.8 THz using density functional theory by Gaussian software, and vibrational modes of some peaks in the experimental absorption coefficient spectra were analyzed and identified. The results show that the experimental absorption peaks at 1.25 and 1.60 THz correspond with the theoretical peaks at 1.30 and 1.67 THz, and these experimental peaks were caused by intramolecular vibrational modes of nitrofurantoin.

Thermometric sensing of nitrofurantoin by noncovalently imprinted polymers containing two complementary functional monomers.

Molecularly imprinted polymers (MIPs) for nitrofurantoin (NFT) recognition addressing in parallel of two complementary functional groups were created using a noncovalent imprinting approach. Specific tailor-made functional monomers were synthesized: a diaminopyridine derivative as the receptor for the imide residue and three (thio)urea derivatives for the interaction with the nitro group of NFT. A significantly improved binding of NFT to the new MIPs was revealed from the imprinting factor, efficiency of binding, affinity constants and maximum binding number as compared to previously reported MIPs, which addressed either the imide or the nitro residue. Substances possessing only one functionality (either the imide group or nitro group) showed significantly weaker binding to the new imprinted polymers than NFT. However, the compounds lacking both functionalities binds extremely weak to all imprinted polymers. The new imprinted polymers were applied in a flow-through thermistor in organic solvent for the first time. The MIP-thermistor allows the detection of NFT down to a concentration of 5 µM in acetonitrile + 0.2% dimethyl sulfoxide (DMSO). The imprinting factor of 3.91 at 0.1 mM of NFT as obtained by thermistor measurements is well comparable to the value obtained by batch binding experiments.

Development of a lateral flow immunoassay (LFA) strip for the rapid detection of 1-aminohydantoin in meat samples.

UNLABELLED: Due to the potential toxic effects of the nitrofuran family of antibiotics, their use in animals in the food industry has raised health concerns. This study was aimed to develop a lateral flow assay (LFA) based on competitive format for the detection of 1-aminohydantoin (AHD) in meat samples. The assay could be completed in 1 min and detected AHDs derivates (CPAHD) at 3 ng/mL, equivalent to 1.40 ng/mL of AHD, which was much lower than that reported in the literature by similar method. The antibody showed no cross-reactivity with a panel of more than 10 nitrofuran analogs except for nitrofurantoin at a high concentration. The test strip was stable at room temperature for up to 8 wk or at 37 °C for 4 wk. Parallel analyses of meat samples with LFA and enzyme-linked immunosorbent assay (ELISA) obtained data in good agreement. This developed gold nanoparticle based LFA had a good specificity, sensitivity, stability, and reliability. It was potentially suitable for on-the-spot large-scale screening of meat samples, and even more other applications. PRACTICAL APPLICATION: Nitrofurantoin is one of antibiotics of the nitrofuran family, which has been used not only to prevent and treat diseases, but also to promote growth in animals. However, concerning the carcinogenicity of the metabolite of nitrofurantoin (AHD), a new fast and convenient method for monitoring AHD should be established. We describe the development of a new test assay for rapid screening of meat samples.

Square wave voltammetric determination of nitrofurantoin in pharmaceutical formulations on highly boron-doped diamond electrodes at different boron-doping contents.

The influence of the boron-doping levels in boron-doped diamond film electrodes on the electrochemical response of nitrofurantoin (NFT) and the development of an electroanalytical procedure for NFT determination were investigated. The investigations were carried out using the techniques of cyclic voltammetry and square wave voltammetry on diamond film electrodes with different boron-doping levels (i.e., 5000, 10,000 and 20,000 mg L(-1)). The level of boron-doping in the diamond film electrodes influenced the electrochemical reduction of NFT. The appropriate cyclic voltammetric response of NFT was obtained with Britton-Robinson buffer at pH 4 and for diamond films doped with 10,000 and 20,000 mg L(-1) of boron. These two films were selected for the development of the electroanalytical procedure. The use of square wave voltammetry with the optimized parameters demonstrated a good linear relationship between the peak current and the NFT concentration for a wide range of concentration. The lower limit of detection for the electrodes doped with 10,000 and 20,000 mg L(-1) of boron were 2.69 x 10(-8) mol L(-1) (6.40 microg L(-1)) and 8.15 x 10(-9) mol L(-1) (1.94 microg L(-1)), respectively, while the lower limits of quantification were 8.96 x 10(-8) mol L(-1) (21.33 microg L(-1)) and 2.72 x 10(-8) mol L(-1) (6.47 microg L(-1)), respectively. The applicability of the proposed procedure was tested using a commercial pharmaceutical formulation of NFT, and the results were compared with the procedure recommended by the British Pharmacopeia. The proposed procedure was sensitive, accurate and precise for analysis of NFT and did not require complex preparations or renovations of the electrode surface. This presents the advantage of eliminating mercury waste and minimizing the adsorptive problems related to the use of other electrodic solid surfaces.

Milk secretion of nitrofurantoin, as a specific BCRP/ABCG2 substrate, in assaf sheep: modulation by isoflavones.

Studies on residues in milk used for human consumption have increased due to health concerns and priority interest in the control of potentially risky drugs. The protein BCRP/ABCG2, present in the mammary epithelia, actively extrudes drugs into milk and can be modulated by isoflavones. Nitrofurantoin is a specific BCRP substrate which is actively excreted into milk by this transporter. In this research, we studied nitrofurantoin transport into milk in four experimental groups: G1-calves fed forage with isoflavones; G2-calves fed forage with isoflavones and administered exogenous genistein and daidzein; G3-calves fed forage without isoflavones; G4-calves fed forage without isoflavones and administered exogenous genistein and daidzein. Results show increased levels of nitrofurantoin in milk from calves without isoflavones (G3) and decreased nitrofurantoin residues in milk when isoflavones were present, either by forage (G1 and G2) or by exogenous administration (G4). The values of C(max) in milk were significantly lower in those groups with isoflavones in forage (G1, G2). Plasma levels were low and unmodified among the groups. Inter-individual variation was high. All these results seem to point to a feasible control of drug secretion into milk through isoflavones in the diet when the drug is a good BCRP/ABCG2 substrate.

Nitrofurantoína y enfermedad pulmonar intersticial de rápida resolución / Rapid resolution of nitrofurantoin-induced interstitial lung disease

Presentamos el caso de una mujer de 40 años diagnosticada de enfermedad pulmonar intersticial secundaria a la administración crónica de nitrofurantoína. A pesar de la grave desestructuración de la arquitectura bronquiolar y una tomografía computarizada de tórax que confirmó la presencia de panalización, la biopsia transbronquial mostró un patrón de neumonitis intersticial aguda-subaguda y el cuadro clínico y radiológico se resolvió en el plazo de un mes tras la administración de prednisona. Este caso pone de manifiesto que la enfermedad pulmonar inducida por nitrofurantoína puede llegar a ser una entidad benigna con respuesta favorable a los corticoides, incluso en el caso de que haya datos radiológicos de fibrosis pulmonar establecida. La biopsia transbronquial podría ser una prueba útil para evaluar la reversibilidad de las lesiones pulmonares asociadas a la nitrofurantoína(AU)

We report the case of a 40-year-old woman diagnosed with interstitial lung disease due to long-term nitrofurantoin therapy. Despite severely distorted bronchiolar architecture and honeycombing confirmed by computed tomography of the thorax, transbronchial biopsy showed a pattern of acute/subacute interstitial pneumonitis and the symptoms and radiographic findings disappeared within 1 month after administration of prednisone. This case shows that nitrofurantoin-induced lung disease may run a benign course and respond favorably to corticosteroids, even when there is radiographic evidence of established lung fibrosis. Transbronchial biopsy might be useful for assessing the reversibility of pulmonary lesions associated with nitrofurantoin(AU)

Development of molecularly imprinted polymers for the binding of nitrofurantoin.

Novel molecularly imprinted polymers (MIPs) for the recognition of nitrofurantoin (NFT) were prepared by photoinitiated polymerisation in polar solvent using 2,6-bis(methacrylamido) pyridine (BMP) as the functional monomer and carboxyphenyl aminohydantoin (CPAH) as the analogue of the template. The binding constants of the complex between BMP and nitrofurantoin or CPAH in DMSO were determined with 1H NMR titration to be 630+/-104 and 830+/-146 M(-1), respectively. To study the influence of the functional monomer, two polymer compositions were prepared containing the template, the functional monomer and the crosslinker in the molar ratio 1:1:12 for MIP1 and 1:4:20 for MIP2, respectively. The imprinting factor at saturation concentration of nitrofurantoin, which is the ratio of the amount bound to the MIP and the non-imprinted control polymer (NIP), was determined to be 2.47 for MIP1 and 2.49 for MIP2. The cross reactivity of the imprinted polymers seems to be determined by the ability to form hydrogen bonds to the functional monomer while the shape of the molecule has no real influence.

A simple and sensitive spectrofluorimetric method for analysis of some nitrofuran drugs in pharmaceutical preparations.

A simple, rapid, selective and sensitive spectrofluorimetric method was described for the analysis of three nitrofuran drugs, namely, nifuroxazide (NX), nitrofurantoin (NT) and nitrofurazone (NZ). The method involved the alkaline hydrolysis of the studied drugs by warming with 0.1 M sodium hydroxide solution then dilution with distilled water for NX or 2-propanol for NT and NZ. The formed fluorophores were measured at 465 nm (lambda (Ex) 265 nm), 458 nm (lambda (Ex) 245 nm) and 445 nm (lambda (Ex) 245 nm) for NX, NT and NZ, respectively. The reaction pathway was discussed and the structures of the fluorescent products were proposed. The different experimental parameters were studied and optimized. Regression analysis showed good correlation between fluorescence intensity and concentration over the ranges 0.08-1.00, 0.02-0.24 and 0.004-0.050 microg ml(-1) for NX, NT and NZ, respectively. The limits of detection of the method were 8.0, 1.9 and 0.3 ng ml(-1) for NX, NT and NZ, respectively. The proposed method was validated in terms of accuracy, precision and specificity, and it was successfully applied for the assay of the three nitrofurans in their different dosage forms. No interference was observed from common pharmaceutical adjuvants. The results were favorably compared with those obtained by reference spectrophotometric methods.