Fourier-transform infrared spectroscopy imaging is a useful adjunct to routine histopathology to identify failure of polyethylene inlays in revision total hip arthroplasty.

The use of highly crosslinked ultra-high molecular weight polyethylene (XLPE) has significantly reduced the volumetric wear of acetabular liners, thereby reducing the incidence of osteolysis. However, contemporary components tend to generate smaller wear particles, which can no longer be identified using conventional histology. This technical limitation can result in imprecise diagnosis. Here, we report on two uncemented total hip arthroplasty cases (~7 years in situ) revised for periprosthetic fracture of the femur and femoral loosening, respectively. Both liners exhibited prominent wear. The retrieved pseudocapsular tissue exhibited a strong macrophage infiltration without microscopically identifiable polyethylene particles. Yet, using Fourier-transform infrared micro-spectroscopic imaging (FTIR-I), we demonstrated the prominent intracellular accumulation of polyethylene debris in both cases. This study shows that particle induced osteolysis can still occur with XLPE liners, even under 10 years in situ. Furthermore, we demonstrate the difficulty of determining the presence of polyethylene debris within periprosthetic tissue. Considering the potentially increased bioactivity of finer particles from XLPE compared to conventional liners, an accurate detection method is required, and new histopathological hallmarks of particle induced osteolysis are needed. FTIR-I is a great tool to that end and can help the accurate determination of foreign body tissue responses.

Peculiar reaction of oxidized zirconium from a total knee arthroplasty prosthesis: A case report.

Oxidized zirconium (OxiniumTM) prostheses, made up of a metallic alloy of zirconium with a ceramic surface formed by oxidizing the outer layer, were developed as an alternative bearing surface to reduce polyethylene wear and decrease failure of total knee arthroplasty (TKA). We report a unique catastrophic failure of an Oxinium TKA with consequent accelerated wear and severe metallosis. Intraoperatively, we observed extensive wear grooving of the femoral component with exposure of the underlying silver layers and the complete wear of polyethylene on the medial side. Metallic debris had a peculiar arthrogram appearance, noted within the cut surface of the femur and tibia, indicative of the osteolysis that occurred, leading up to the failure of the implants. The histopathologic examination revealed a collection of macrophages with foreign-body reactions and black-pigmented metal-induced wear particles. Oxinium has clear benefits regarding superior wear properties; however, surgeons need to be aware that there is a risk of exposure to the underlying layers that may precede accelerated wear, deformation, and metallosis. Uncovering the deeper layers could result in the appearance of an arthrogram on plain radiographs. Early identification of polyethylene wear and prompt revision is crucial to avoid the rapid progression of subsequent metallosis and catastrophic implant failure, specifically when using oxidized zirconium components for TKA. To the best of our knowledge, this is the first report presenting a detailed histologic analysis to provide insight into the mechanisms of the failed Oxinium components.

Roles of inflammatory cell infiltrate in periprosthetic osteolysis.

Classically, particle-induced periprosthetic osteolysis at the implant-bone interface has explained the aseptic loosening of joint replacement. This response is preceded by triggering both the innate and acquired immune response with subsequent activation of osteoclasts, the bone-resorbing cells. Although particle-induced periprosthetic osteolysis has been considered a foreign body chronic inflammation mediated by myelomonocytic-derived cells, current reports describe wide heterogeneous inflammatory cells infiltrating the periprosthetic tissues. This review aims to discuss the role of those non-myelomonocytic cells in periprosthetic tissues exposed to wear particles by showing original data. Specifically, we discuss the role of T cells (CD3+, CD4+, and CD8+) and B cells (CD20+) coexisting with CD68+/TRAP- multinucleated giant cells associated with both polyethylene and metallic particles infiltrating retrieved periprosthetic membranes. This review contributes valuable insight to support the complex cell and molecular mechanisms behind the aseptic loosening theories of orthopedic implants.

PLGA nanoparticles engineering extracellular vesicles from human umbilical cord mesenchymal stem cells ameliorates polyethylene particles induced periprosthetic osteolysis.

The wear particle-induced dissolution of bone around implants is a significant pathological factor in aseptic loosening, and controlling prosthetic aseptic loosening holds crucial social significance. While human umbilical cord mesenchymal stem cell-derived exosomes (HucMSCs-Exos, Exos) have been found to effectively promote osteogenesis and angiogenesis, their role in periprosthetic osteolysis remains unexplored. To enhance their in vivo application, we engineered HucMSCs-Exos-encapsulated poly lactic-co-glycolic acid (PLGA) nanoparticles (PLGA-Exos). In our study, we demonstrate that PLGA-Exos stimulate osteogenic differentiation while inhibiting the generation of reactive oxygen species (ROS) and subsequent osteoclast differentiation in vitro. In vivo imaging revealed that PLGA-Exos released exosomes slowly and maintained a therapeutic concentration. Our in vivo experiments demonstrated that PLGA-Exos effectively suppressed osteolysis induced by polyethylene particles. These findings suggest that PLGA-Exos hold potential as a therapeutic approach for the prevention and treatment of periprosthetic osteolysis. Furthermore, they provide novel insights for the clinical management of osteolysis.

Glycolytic reprogramming underlies immune cell activation by polyethylene wear particles.

Primary total joint arthroplasties (TJAs) are widely and successfully applied reconstructive procedures to treat end-stage arthritis. Nearly 50 % of TJAs are now performed in young patients, posing a new challenge: performing TJAs which last a lifetime. The urgency is justified because subsequent TJAs are costlier and fraught with higher complication rates, not to mention the toll taken on patients and their families. Polyethylene particles, generated by wear at joint articulations, drive aseptic loosening by inciting insidious inflammation associated with surrounding bone loss. Down modulating polyethylene particle-induced inflammation enhances integration of implants to bone (osseointegration), preventing loosening. A promising immunomodulation strategy could leverage immune cell metabolism, however, the role of immunometabolism in polyethylene particle-induced inflammation is unknown. Our findings reveal that immune cells exposed to sterile or contaminated polyethylene particles show fundamentally altered metabolism, resulting in glycolytic reprogramming. Inhibiting glycolysis controlled inflammation, inducing a pro-regenerative phenotype that could enhance osseointegration.

Do polyethylene wear particles affect the development of pseudotumor in total hip arthroplasty? A minimum 15-year follow-up.

BACKGROUND: Adverse local tissue reactions have been problematic as an implant-related complication in total hip arthroplasty (THA). Despite the absence of significant metal wear and corrosion, granulomatous pseudotumor has been reported to be caused by polyethylene wear. We performed a long-term follow-up study investigating the relationship between polyethylene wear and pseudotumor formation in THA. METHODS: This study included 57 patients (64 hips) that underwent primary THA with metal-on-polyethylene or ceramic-on-polyethylene bearing over a minimum follow-up of 15 years. They were stratified into pseudotumor and non-pseudotumor groups and their linear wear rates of polyethylene liner and serum cobalt (Co) and chromium (Cr) ion levels were compared. Pseudotumor was diagnosed on metal artifact reduction sequence-MRI according to its composition and wall thickness using the Hauptfleisch classification. RESULTS: The incidence of pseudotumor was 34% (22/64 hips) at the mean follow-up of 16.9 years. Metal ion levels did not differ between the pseudotumor and non-pseudotumor groups, and none of the patients exceeded the Co/Cr ratio of 2.0 µg/L. Moreover, the wear rate in the pseudotumor group was 1.8 times greater than in the non-pseudotumor group (0.14 vs. 0.08 mm/year, P < 0.001). According to an analysis of the receiver operating characteristic curves, the cutoff level of the wear rate to discriminate between pseudotumor and non-pseudotumor patients at 15 years was 0.11 mm/year (area under the curve = 91%; sensitivity = 95%; specificity = 78%; accuracy = 87%). CONCLUSIONS: Our results might provide new insights into excessive polyethylene wear potentially leading to the future development of both pseudotumor and osteolysis. Further studies are needed to clarify the direct relationship between polyethylene wear and pseudotumor and the mutual effects of osteolysis and pseudotumor in particle reactions.

In Vivo Performance of Vitamin E Stabilized Polyethylene Implants for Total Hip Arthroplasty: A Review.

BACKGROUND: Vitamin E stabilization was introduced to improve the oxidative stability, wear resistance, and mechanical properties of highly crosslinked polyethylene (HXLPE). In this literature review, we asked: (1) How has vitamin E-stabilized HXLPE (VEPE) performed in vivo for total hip arthroplasty (THA) and how does it compare with conventional ultra-high molecular weight polyethylene (UHMWPE) and HXLPE without vitamin E; and (2) Is there an apparent difference in the clinical performance of VEPE created by blending versus diffusion? METHODS: We performed a systematic search of the literature according to the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines using PubMed and Embase. Included studies reported the in vivo behavior of VEPE in THA. We reviewed 41 studies. RESULTS: For all studies that compared polyethylene with and without VE stabilization, outcomes for VEPE were either equivalent or superior to the control group (for HXLPE without VE and conventional UHMWPE controls, respectively). Hip insert wear rates were generally less than 0.1 mm/year and in most cases were less than 0.05 mm/year. No VEPE components were revised for osteolysis or adverse outcomes specific to VE incorporation. CONCLUSION: Across the literature, we found that VEPE was reported to be clinically effective for THA applications, with much of the research indicating positive clinical outcomes and lower or equivalent wear rates compared to conventional UHMWPE and HXLPE controls without VE. Instances of early component fracture were reported, but have multiple potential causes. There is a gap in the literature for comparison of blended and diffused components, so the in vivo impact of VE incorporation method remains to be seen. Overall, this study provides a comprehensive summary of VEPE clinical performance for THA and may serve as a resource for future investigations.

Postoperative assessment and management of metallosis and periprosthetic osteolysis in patients treated with metal-on-polyethylene total wrist prostheses.

We analysed the relationship between serum metal ions, radiological periprosthetic osteolysis and the clinical features in a series of 25 patients treated with fourth-generation metal-on-polyethylene total wrist prostheses. The mean implant follow-up was 7 years. Our results show that titanium was the main elevated serum metal ion in patients with the prostheses that we used; elevated serum cobalt or chromium values were infrequent. The risk of loosening was higher in an implant older than 6 years, with more than five periprosthetic osteolysis points according to our radiograph zone system, and serum titanium values between 26 to 31 µg/L. The presence of metallosis pseudotumours does not guarantee but increases the risk of implant failure, which may be asymptomatic or associated with little pain.Level of evidence: IV.

Comparison of animal and human blood for in vitro dynamic thrombogenicity testing of biomaterials.

BACKGROUND: To determine suitable alternatives to human blood for in vitro dynamic thrombogenicity testing of biomaterials, four different animal blood sources (ovine, bovine, and porcine blood from live donors, and abattoir porcine blood) were compared to fresh human blood. METHODS: To account for blood coagulability differences between individual donors and species, each blood pool was heparinized to a donor-specific concentration immediately before testing in a dynamic flow loop system. The target heparin level was established using a static thrombosis pre-test. For dynamic testing, whole blood was recirculated at room temperature for 1 h at 200 ml/min through a flow loop containing a single test material. Four materials with varying thrombotic potentials were investigated: latex (positive control), polytetrafluoroethylene (PTFE) (negative control), silicone (intermediate thrombotic potential), and high-density polyethylene (HDPE) (historically thromboresistant). Thrombus weight and surface area coverage on the test materials were quantified, along with platelet count reduction in the blood. RESULTS: While donor-specific heparin levels varied substantially from 0.6 U/ml to 7.0 U/ml among the different blood sources, each source was able to differentiate between the thrombogenic latex and the thromboresistant PTFE and HDPE materials (p < 0.05). However, only donor ovine and bovine blood were sensitive enough to differentiate an increased response for the intermediate thrombotic silicone material compared to PTFE and HDPE. CONCLUSIONS: These results demonstrated that multiple animal blood sources (particularly donor ovine and bovine blood) may be suitable alternatives to fresh human blood for dynamic thrombogenicity testing when appropriate control materials and donor-specific anticoagulation levels are used.

Metallosis following hip arthroplasty: two case reports.

BACKGROUND: There has been increasing recognition of local and systemic adverse events associated with the release of metal ions and nanoparticles from hip arthroplasty components. Adverse local tissue reactions to metal ion debris can include periprosthetic solid and cystic masses known as pseudotumors. These masses can result in pain, swelling, extensive destruction to surrounding hip soft-tissues, and compression syndromes on neurovascular, gastrointestinal, and genitourinary structures. As reports of pseudotumors requiring multidisciplinary excision are limited, we present two pseudotumor cases that were excised through a combined approach. CASE PRESENTATIONS: The first case involves a 60-year-old Caucasian female with a large pseudotumor with intrapelvic and vascular involvement associated with a metal-on-polyethylene total hip arthroplasty, excised with contributions from general surgery, vascular surgery, and orthopedic surgery. Pseudotumor excision was followed by a revision total hip reconstruction in addition to an abductor mechanism reconstruction with tendo-Achilles allograft. The second case is that of a 64-year-old Caucasian female with a pseudotumor in close relationship to the femoral vessels following a metal-on-metal hip resurfacing, excised with a combination of vascular surgery and orthopedic surgery, with subsequent revision total hip reconstruction. CONCLUSIONS: There remains a lack of literature to support the extensiveness of pseudotumor excision required in complex cases with significant intrapelvic or vascular involvement. Given the potential for significant adverse effects of large masses, the authors' preference is to involve a multidisciplinary team to achieve a more comprehensive excision while minimizing the risk of potential complications.

Determination of optimal concentration of vitamin E in polyethylene liners for producing minimal biological response to prosthetic wear debris.

The introduction of vitamin E-blended ultra-high molecular weight polyethylene (VE-UHMWPE) for use in prosthetic components of hip implants has resulted in the production of implants that have excellent mechanical properties and substantially less adverse cellular responses. Given the importance of a biological response to wear in the survival of a prosthesis, we generated wear debris from UHMWPE that had been prepared with different concentrations of vitamin E of 0.1, 0.3, 0.5, and 1% and evaluated their biological reaction in vitro and in vivo. All types of VE-UHMWPE debris promoted a significantly lower expression of Tnf-α in murine peritoneal macrophages than that induced by conventional UHMWPE debris. However, levels of Tnf-α were not significantly different among the macrophages that were stimulated with VE-UHMWPE wear at the concentrations tested. The ability of wear debris to induce inflammatory osteolysis was assessed in a mouse calvarial osteolysis model. The expressions of Tnf-α, Il-6, and Rankl in granulomatous tissue formed around the wear debris were significantly reduced in mice that had been implanted with 0.3%VE-UHMWPE debris as compared to the corresponding values for mice that had been implanted with UHMWPE debris. Consistent with this finding, 0.3%VE-UHMWPE debris showed the lowest osteolytic activity, as evidenced by the reduced bone resorption area, the degree of infiltration of inflammatory cells and the TRAP staining area. Our results suggested that a 0.3% vitamin E concentration is the most appropriate concentration for use in prosthetic components with a reduced adverse cellular response for prolonging the life-span of the implant.

Midterm osteolysis-induced aseptic failure of the M6-C™ cervical total disc replacement secondary to polyethylene wear debris.

BACKGROUND: According to published meta-analyses, cervical total disc replacement (CTDR) seems to be superior to anterior cervical decompression and fusion (ACDF) in most clinical parameters. Despite short-term clinical success of CTDR, there are concerns regarding long-term durability of these prostheses. METHODS: This prospective study involved 382 patients who received standalone CTDR or a hybrid procedure (ACDF/CTDR). A retrospective comparison between different CTDR devices was conducted regarding patient-reported outcome measures (PROMs), failure scenarios, and revision surgeries. The M6-C™ Artificial Cervical Disc (Orthofix, Lewisville, Texas) cohort was compared to the other CTDR devices clinically. Etiological reasons for revision, and the surgical technique of the revision was investigated. RESULTS: Fifty-three patients received M6-C CTDR. Eighteen patients (34%) were revised at an average of 67 months postoperatively for wear-induced osteolysis. There were three additional cases of pending revision. The PROMs of the two groups were similar, indicating that the failure mode (wear-induced osteolysis) is often asymptomatic. The demographics of the two groups were also similar, with more women undergoing revision surgery than men. There were three one-level CTDR, four two-level hybrids, seven three-level hybrids, and three four-level hybrids revised anteriorly. Sixteen patients underwent removal of the prosthesis and were treated according to the extent of osteolysis. There were four vertebrectomies, six revisions to ACDF, and six revisions to another CTDR. One patient underwent supplemental fixation using a posterior approach. The other CTDR cohort had an incidence of 3.3% at the equivalent time, and none of these were due to osteolysis or wear-related events. CONCLUSIONS: There is a concerning midterm failure rate related to ultra-high-molecular-weight-polyethylene wear-induced osteolysis in the M6-C. Patients implanted with the M6-C prosthesis should be contacted, informed, and clinically and radiologically assessed.

Effects induced by polyethylene microplastics oral exposure on colon mucin release, inflammation, gut microflora composition and metabolism in mice.

Microplastics are plastic fragments widely distributed in the environment and accumulate in the organisms. However, the research on microplastics effects in mammals is limited. Polyethylene is the main kind of microplastics in the environment. We hypothesized that polyethylene exposure disrupts host intestine metabolism by modifying intestine microflora composition and then lipopolysaccharide (LPS) pathway. Female mice were orally exposed to 0, 0.002 and 0.2 µg/g/d polyethylene microplastics (PE MPs) for 30 days. Colon mucin density was quantized after AB-PAS staining. Mucin 2 (MUC2), inflammatory factors (IL-1ß, IL-6, IL-8 and IL-10), short-chain fatty acid receptors (GPR41 and GPR43), LPS receptors (TLR4 and MyD88) and LPS pathway downstream genes (ERK1 and NF-κB) mRNA levels in colon were measured. Feces were collected on the 15th day of exposure for gut microflora analysis. Blood biochemical analysis was performed. Results showed that 0.2 µg/g/d PE MPs exposure significantly decreased colon mucin expression (p < 0.05), decreased IL-1ß (p < 0.05) and increased IL-8 and IL-10 levels (p < 0.01 and p < 0.001 respectively). Microflora data showed that in 0.2 µg/g/d PE MPs group the number of Firmicutes decreased and the number of Bacteroides increased (both p < 0.01). Predicted KEGG metabolic pathways by piecrust method indicated that PE MPs enhanced amino acids metabolism in microflora. ERK1 and NF-κB mRNA were significantly lower in 0.2 µg/g/d PE MPs group (both p < 0.001). Blood total protein, albumin and globulin levels significantly increased after 0.2 µg/g/d PE MPs exposure (p < 0.01, p < 0.01 and p < 0.05 respectively). These results indicate that PE MPs exposure induced decreased mucin production, a slight immune response and increased the microflora amino acid metabolism in the mice colon by modifying colon microflora composition. SUMMARY: Polyethylene microplastics exposure decreased colon mucin release and increased amino acid metabolism by modifying colon microflora composition.

Polyethylene liner dissociation in a DePuy pinnacle cup with a manufacturer analysis of the failed component.

A 74-year-old patient presented to the emergency department with acute atraumatic hip pain 9 years after her primary left total hip arthroplasty (THA). Plain radiographic imaging demonstrated lateralisation of the femoral head within the acetabular shell-indicating an issue with the polyethylene liner. The patient required revision of the acetabular component and the femoral head, as well as a new polyethylene liner. A detailed analysis of the components removed was performed by DePuy Synthes Engineering. Between 2009 and 2020, 8 publications have documented 52 cases of liner dissociation with the Pinnacle acetabular component and Marathon polyethylene liner. Various theories have been proposed in the literature as all of these components appear to fail in the same way, with shearing of the locking tabs in the polyethylene liner. In spite of a manufacturer analysis of the components, no root cause was identified as to why the polyethylene liner failed.

Vitamin E-enriched polyethylene bearings are not inferior to Arcom bearings in primary total knee arthroplasty at medium-term follow-up.

INTRODUCTION: The release of wear particles can be responsible for periprosthetic osteolysis, which can in turn, lead to aseptic loosening. Vitamin E-infused polyethylene (HXLPE Vit-E) has been shown, in vitro, to be more resistant to wear than conventional polyethylene (UHMWPE) by its crosslinking (HXLPE) and its higher resistance to oxidation. After reading a case report of a fracture of a vitamin E-enriched HXLPE bearing, the aim of this retrospective study was to evaluate fracture risk and clinical inferiority or not of vitamin-E HXLPE compared to conventional polyethylene in total knee arthroplasty (TKA). MATERIALS AND METHODS: Three hundred and forty-nine patients (403 TKAs) were contacted, to find out whether they had undergone revision surgery for any reason after a mean (SD) of 7 (1.5) years. Follow-up control radiographs were analyzed for periprosthetic radiolucent lines (RLL) and loosening. Two different Patient Reported Outcome Measurements Scores (PROMS), KOOS and FJS-12, were utilized to assess the daily functionality and identify potential problems. RESULTS: No statistically significant difference in revision rate, occurrence of aseptic loosening or RLL nor outcome as measured with PROMS was observed. CONCLUSIONS: No bearing fractures or clinical inferiority was observed for vitamin E-enriched HXLPE at medium-term follow-up (7 years) compared to conventional Arcom polyethylene. LEVEL OF EVIDENCE: Level III, therapeutic study.

The impact of polyethylene abrasion on the occurrence of periprosthetic proximal femoral fractures in patients with total hip arthroplasty.

INTRODUCTION: In addition to abrasion-induced osteolysis and ensuing instabilities, the polyethylene (PE) abrasion of total hip arthroplasty (THA) inlays can also cause gait instability due to the decentralization of the hip joint. The current literature yields, as yet, insufficient findings whether these two factors are linked directly or indirectly to a higher risk for periprosthetic proximal femoral fractures (PPFF). The aim of our retrospective evaluation is to analyse the impact of PE abrasion on the pathology of PPFF in patients with THA. MATERIAL AND METHODS: The retrospective evaluation comprises all PPFF in patients with THA in the period from 01/2010 up to 12/2016. The study group (SG) included 66 cases (n = 66). The control group (CG) was comprised of patients with asymptomatic THA (n = 66), who were treated by our outpatient department including routine check-ups and X-ray examinations. We used the matched-pair methodology to scale the period of postsurgical care of the CG to the lifetime of the implant up to PPFF in the SG. We included epidemiologic data, radiological femoral head decentralization, osteolysis (Gruen classification), instabilities, acetabular cup position, and implant properties in our analysis. For the SG, we also included intra-operative signs of abrasion. FINDINGS: The SG showed significantly higher numbers of decentralized THA as signs of inlay erosion with 73% compared to only 41% in the CG (p > 0.001). The SG showed 1 ± 0.68 mm hip joint decentralization as to 0.5 ± 0.59 mm in the CG (p = 0.004). We found significantly more cases of osteolysis in the SG (n = 25) than in the CG (n = 13) (p = 0.003). We found no notable differences in acetabular cup inclination or anteversion as well as cup size. However, differences were significant in femoral head size (SG 32 ± 2.3 mm, CG 36 ± 2.4 mm; p = 0.042) and head material. We found more widespread use of metal femoral heads in the SG than in the CG (SG 1:1, CG 1:21; p = 0.001). CONCLUSION: PPFF patients showed significantly higher rates of inlay erosion, resulting in femoral head decentralization and osteolysis. The higher rate of fracture is likely caused by the increasing instability of the implant fixation due to abrasion-induced osteolysis and the associated degradation of bone quality. It is conceivable that the abrasion and decentralization of the THA can also lead to gait instability, and thus, a higher proneness to falls. Gait instability can also be aggravated by increased granulation tissue and effusion due to the inlay abrasion. Although this cannot be substantiated by the investigation. In patients with decentralization of the THA and osteolysis, a radiological follow-up should be performed, and in case of gait instability (femoral head and) inlay replacements should be considered.

Damage patterns in polyethylene fixed bearings of retrieved total ankle replacements.

INTRODUCTION: Poor long-term outcomes continue to hinder the universal adoption of total ankle replacements (TAR) for end stage arthritis. In the present study, polyethylene inserts of TARs retrieved at revision surgery were analyzed for burnishing, scratching, mechanical damage, pitting, and embedded particles. METHODS: Fourteen retrieved polyethylene inserts from a fixed bearing total ankle replacement design currently in clinical use were analyzed. Duration of time in vivo was between 11.5 months and 120.1 months. Three investigators independently graded each articular surface in quadrants for five features of damage: burnishing, scratching, mechanical damage, pitting, and embedded particles. RESULTS: No correlation was found for burnishing between the anterior and posterior aspects (p = 0.47); however, scratching and pitting were significantly higher on the posterior aspect compared to the anterior aspect (p < 0.03). There was a high correlation between burnishing and in vivo duration of the implant (anterior: R = 0.67, p = 0.01, posterior: R = 0.68, p = 0.01). CONCLUSION: The higher concentration of posterior damage on these polyethylene inserts suggested that prosthesis-related (design) or surgeon-related (technique) factors might restrict the articulation of the implant. The resulting higher stresses in the posterior articular surfaces may have contributed to the failure of retrieved implants Keywords: Retrieval, Polyethylene Damage, Total Ankle Replacement.

Radiographic Risk Factors Associated With Adverse Local Tissue Reaction in Head-Neck Taper Corrosion of Primary Metal-on-Polyethylene Total Hip Arthroplasty.

BACKGROUND: Adverse local tissue reactions (ALTRs) in metal-on-polyethylene (MoP) total hip arthroplasty (THA) with head-neck taper corrosion are multifactorial, involving implant and patient factors. This study aimed to identify any potential clinical risk factors associated with failed MoP THA due to head-neck taper corrosion. METHODS: A series of 146 MoP THA patients was investigated: (1) ALTR (n = 42) on metal artifact sequence MRI and (2) non-ALTR (n = 104). Both cohorts were compared regarding femoral neck shaft angle, acetabular implant orientation, component size, femoral head offset, measurement of medial and vertical femoral offsets, and femoral stem alloy. RESULTS: The occurrence of ALTR was associated with increased radiographic femoral stem offset (36.0 ± 7.7 mm versus 40.8 ± 7.3 mm, P = 0.008), increased femoral head offset (0.7 ± 3.4 versus 4.5 ± 3.7, P < 0.001), and the use of Ti-12Mo-6Zr-2Fe alloy stems (P = 0.041). The presence of ALTR was notably associated with higher chromium (2.0 versus 0.5 µg/L) and cobalt (7.4 versus 0.7 µg/L, P < 0.001). DISCUSSION: This study identified increased femoral head and stem offset and the use of Ti-12Mo-6Zr-2Fe alloy stems as risk factors for clinically relevant ALTR due to head-neck taper corrosion in MoP THA patients. This provides evidenced-based practical information for surgeons in identifying "at-risk" symptomatic MoP THA patients with head-neck taper corrosion for systematic risk stratification.