Transcatheter Correction of Superior Venacaval Form of Sinus Venosus Defects Using Balloon-Mounted Covered STENTS.

Superior sinus venosus defects (SVD) are interatrial communications located above the confines of the oval fossa, where unroofing of the right upper pulmonary vein leads to its anomalous drainage to the superior venacava. Recent emergence of transcatheter closure of these defects using covered stents is an attractive alternative option especially in adults with additional comorbidities. This article focuses on various aspects of non-surgical closure of SVD, including patient selection, appropriate hardware options, step-by-step procedural details, evolution and modifications in the techniques over the last decade, protocols for follow-up evaluation, and potential complications associated with this intervention.

Transcatheter Pulmonary Valve in Congenital Heart Disease.

Over the last 2 decades, experience with transcatheter pulmonary valve replacement (TPVR) has grown significantly and has become an effective and reliable way of treating pulmonary valve regurgitation, right ventricular outflow (RVOT) obstruction, and dysfunctional bioprosthetic valves and conduits. With the introduction of self-expanding valves and prestents, dilated native RVOT can be addressed with the transcatheter approach. In this article, the authors review the current practices, technical challenges, and outcomes of TPVR.

Pulmonary Artery Stent Implantation.

Pulmonary artery stent implantation has become integral in the treatment of pulmonary artery stenosis and is probably the most efficacious therapy for these lesions. Advancements in technology involving stent design and the equipment used for stent delivery have made this procedure much safer and more effective. Strategies to mitigate and successfully treat adverse events related to pulmonary artery stent implantation are reasonably well-established. Pulmonary artery stent implantation remains one of the most complex and technically challenging of congenital cardiac interventions.

Robot-Assisted Correction of a Supra-Long Tracheal Stenosis Using C-Type Nickel-Titanium Alloy Exterior Stenting and Suspension Fixation Technique: A Case Report.

T-tubes and airway stents are commonly used but have limited effectiveness and frequent complications. A 50-year-old male patient presented with severe tracheal stenosis, affecting an 8.7 cm length of the airway. We employed an innovative approach known as external suspension fixation of tracheal stent using robotic assistance. This method involves surgically attaching the stent to the exterior of the trachea to provide support and stabilize the softened or collapsed tracheal segments. We designed a C-shaped nickel-titanium alloy exterior stent and successfully fixed it using robotic assistance. This intervention effectively restored tracheal function and led to a favorable postoperative recovery. The technique does not affect tracheal membrane function or airway mucociliary clearance. It could potentially be considered as a new option for treating long-segment benign tracheal softening or collapse.

Clinical Relevance of Posterior Osteophyte Formation in Ultra-congruent Total Knee Arthroplasty: Midterm Radiographic Rollback and Impingement Analysis.

Background: Posterior femoral condylar osteophytes were frequently observed in patients with the ultra-congruent (UC) deep-dish design prosthesis. Therefore, the purpose of the present study was to verify the clinical relevance of osteophyte formation in the UC design. Methods: From March 2014 to February 2018, a comparative study was conducted on 96 knees using the UC design. They were divided into 2 groups (group 1: osteophyte +, group 2: osteophyte -). Intraoperative findings, indirect femoral rollback assessment using 30° flexion and active full flexion lateral radiographs, serial change of the osteophyte, and outcomes were compared. Results: The mean follow-up period was 49.35 ± 3.47 months in group 1 and 47.52 ± 3.37 months in group 2. Posterior component coverage was significantly different between the groups: group 1 exhibited more underhang and group 2 exhibited more overhang (p = 0.022). On the indirect assessment of the femoral rollback, there was a statistically significant difference in deep flexion and change in distance (p < 0.001 and p < 0.001, respectively). There was no statistical difference between the 2 groups in the American Knee Society knee and function score, and group 2 showed significant improvement in pain compared to group 1 in Western Ontario and McMaster University Arthritis Index pain score (p = 0.029). Conclusions: Posterior condylar osteophyte formation was related to posterior impingement. It was more frequently observed in the underhang of the femoral component and insufficient femoral rollback. In addition, it changed with time and caused negative effects, including a gradual decrease in flexion and more pain.

Development and Preliminary Evaluation of a Bimodal Foot Prosthesis for Walking and Running.

People often alternate between bouts of walking and running, for instance, when adults participate in recreational activities. Transitioning between activities can be challenging for prosthesis users because existing prosthetic feet are not well-suited for both tasks. Meanwhile, switching between prostheses for different tasks is often impractical. Collectively, these challenges can present barriers to physical activity participation for people with limb loss, which can negatively impact social or physical health. This work describes the development and evaluation of a passive bimodal prosthetic foot prototype with different configurations and stiffnesses for walking and running. Users rated the bimodal prosthesis higher for standing and walking compared to a running prosthesis (+2.3 for both tasks on a seven-point Likert scale). Users rated the bimodal prosthesis higher for running compared to a walking prosthesis (+1.7 and +0.5 for 2.0 and 2.5 m/s running, respectively). Changing from walking to running mode increased the device's stiffness by 23-84%, depending on the user's preference. Users could switch between bimodal prosthesis walking and running modes quickly (21.3 ± 12.0 s). Overall, the preliminary results were encouraging in terms of user satisfaction, stiffness change between modes, and mode-switching speed. These findings motivate future exploration of this bimodal prosthesis concept.

Cementless Total Knee Arthroplasty: Is it Safe in Demineralized Bone?

There is concern for cementless total knee arthroplasty (TKA) in patients with decreased bone mineral density (BMD) due to the potential increase in complications, namely failed in-growth or future aseptic loosening. Some data suggest that advances in cementless prostheses mitigate these risks; however this is not yet born out in long-term registry data. It is crucial to expand our understanding of the prevalence and etiology of osteoporosis in TKA patients, survivorship of cementless implants in decreased BMD, role of bone-modifying agents, indications and technical considerations for cementless TKA in patients with decreased BMD. The purpose of this study is to review current literature and expert opinion on such topics.

A new approach of aspheric intralamellar keratoprostheses optic design made with poly(2-hydroxy ethylmethacrylate) hydrogel.

Keratoprosthesis (KPro) is a surgical procedure largely confined to end-stage corneal blindness correction, where artificial cornea substitutes the native tissue. Though the problem of bio integration was addressed partially by strategic utilization of synthetic polymers and native tissue, major challenges like optical performance and design-associated post-operative complications of KPro were overlooked. Herein, a novel intralamellar KPro design is conceptualized to address these challenges using a light-transparent poly(2-hydroxy ethylmethacrylate) (pHEMA) hydrogel with good shape memory. pHEMA-based optics' theoretically modelled refractive surfaces for both phakic and aphakic conditions were investigated against the standard Navarro model and optimized to new aspheric geometries having high optical functionality utilizing the Zemax OpticStudio software. The optical clear aperture size standardized achieved a 15% improvement in the illumination field. The introduction of asphericity on the two refractive surfaces of the optic on both models resulted in substantial improvements in the spot spread confinement on the retina, spatial resolution, and Seidel aberration. The design simulation study shows that the developed materials' optical characteristics coupled with newly optimized refractive surface geometries can indeed deliver very high visual performance. Furthermore, the procedure can be adapted to analyze and optimize the optical performance of a KPro, intraocular lens, or contact lens.

Biomechanical study of 3D-printed titanium alloy pad for repairing glenoid bone defect.

Background: The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. Methods: The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. Results: The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (p < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (p < .05). However, there was no significant difference in humerus displacement between groups D and A (p > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (p < .05). Conclusion: The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.

Unnecessary Explantation of IDEAL IMPLANT Structured Saline Breast Implants Prompted byRadiologic Misdiagnosis of Rupture.

ABSTRACT: The unique dual-lumen and baffle design of the IDEAL IMPLANT Structured Saline breast implant gives it specific advantages over both silicone gel-filled and the original saline-filled implants. This internal baffle structure also gives it an appearance on various radiologic imaging studies that may be misinterpreted as a rupture because of similarities to the well-known radiologic appearance of a ruptured silicone gel implant. Patients may present with various misinterpreted imaging studies, highlighting the need for plastic surgeons and radiologists to be familiar with the normal appearance of the intact IDEAL IMPLANT and be able to distinguish it from a ruptured IDEAL IMPLANT. The radiology findings must be correlated with the clinical findings, or an intact IDEAL IMPLANT misdiagnosed as ruptured, may cause unnecessary patient worry, and may prompt unnecessary surgery for removal or replacement.

Excitation of natural spinal reflex loops in the sensory-motor control of hand prostheses.

Sensory feedback for prosthesis control is typically based on encoding sensory information in specific types of sensory stimuli that the users interpret to adjust the control of the prosthesis. However, in physiological conditions, the afferent feedback received from peripheral nerves is not only processed consciously but also modulates spinal reflex loops that contribute to the neural information driving muscles. Spinal pathways are relevant for sensory-motor integration, but they are commonly not leveraged for prosthesis control. We propose an approach to improve sensory-motor integration for prosthesis control based on modulating the excitability of spinal circuits through the vibration of tendons in a closed loop with muscle activity. We measured muscle signals in healthy participants and amputees during different motor tasks, and we closed the loop by applying vibration on tendons connected to the muscles, which modulated the excitability of motor neurons. The control signals to the prosthesis were thus the combination of voluntary control and additional spinal reflex inputs induced by tendon vibration. Results showed that closed-loop tendon vibration was able to modulate the neural drive to the muscles. When closed-loop tendon vibration was used, participants could achieve similar or better control performance in interfaces using muscle activation than without stimulation. Stimulation could even improve prosthetic grasping in amputees. Overall, our results indicate that closed-loop tendon vibration can integrate spinal reflex pathways in the myocontrol system and open the possibility of incorporating natural feedback loops in prosthesis control.

Restoration of Epicardial Blood Flow After Left Ventricular Unloading With the Impella CP Heart Pump in a Patient With STEMI Treated With Surgical Revascularization.

Left main occlusion presenting as ST-segment elevation myocardial infarction is an exceedingly morbid condition. This article reports a case of cardiac arrest in a patient after a treadmill stress test. Coronary angiography revealed 100% occlusion of the left main coronary artery. Left ventricular unloading with the Impella CP heart pump (ABIOMED/Johnson & Johnson MedTech) was used, after which epicardial blood flow was restored without angioplasty. The patient underwent surgical revascularization. Despite a prolonged revascularization time, there was no evidence of severe myocardial injury postoperatively.

Long-Term Outcomes of Wrist Arthroplasty Using the ReMotion™ Implant in Non-inflammatory Wrist Pathology.

Background: Wrist arthroplasty is increasingly offered to patients with symptomatic wrist arthritis as an alternative to wrist arthrodesis. The purpose of this study was to present our outcomes with the ReMotion™ wrist arthroplasty in a consecutive series of patients with wrist arthritis from non-inflammatory conditions. Methods: Thirteen (eight women, nine dominant wrists) patients, 68 (44-85) years of age with advanced radiocarpal arthritis due to SLAC/SNAC (11) and Kienbock disease (2) had a ReMotion™ (Stryker, Michigan, USA) wrist arthroplasty implanted, and were prospectively followed for 7 (4-9) years. The outcome measures included patient-rated wrist and hand evaluation (PRWHE) score, disabilities of the arm, shoulder and hand questionnaire (QuickDASH) score, visual analogue pain score (0-10) on the radial and ulnar aspect of the wrist at rest (VASrR/VASuR) and activity (VASrA/VASuA), active wrist range of motion (AROM) including flexion, extension, ulnar and radial deviation, pronation and supination and grip and key-pinch strength measured preoperatively and at yearly follow-ups by independent hand therapists. Results: Six patients had ten re-operations during the follow-up including four revisions to a new arthroplasty. Four were considered loose at follow-up. A significant reduction in PRWHE (63 to 12), radial pain at activity (6 to 1) and increased pronation (85° v 90°) was observed. Conclusions: We found a high complication and reoperation rate, two out of 13 had no complications or reoperations. The ReMotion™ arthroplasty should be used with caution in non-inflammatory wrist patients and the patients followed closely. A high reoperation and revision rate can be expected, and surgeons familiar with revision arthroplasty procedures should perform the surgery. Level of Evidence: Level II (Therapeutic).

Polymers in 3D printing of external maxillofacial prostheses and in their retention systems.

Maxillofacial defects, arising from trauma, oncological disease or congenital abnormalities, detrimentally affect daily life. Prosthetic repair offers the aesthetic and functional reconstruction with the help of materials mimicking natural tissues. 3D polymer printing enables the design of patient-specific prostheses with high structural complexity, as well as rapid and low-cost fabrication on-demand. However, 3D printing for prosthetics is still in the early stage of development and faces various challenges for widespread use. This is because the most suitable polymers for maxillofacial restoration are soft materials that do not have the required printability, mechanical strength of the printed parts, as well as functionality. This review focuses on the challenges and opportunities of 3D printing techniques for production of polymer maxillofacial prostheses using computer-aided design and modeling software. Review discusses the widely used polymers, as well as their blends and composites, which meet the most important assessment criteria, such as the physicochemical, biological, aesthetic properties and processability in 3D printing. In addition, strategies for improving the polymer properties, such as their printability, mechanical strength, and their ability to print multimaterial and architectural structures are highlighted. The current state of the prosthetic retention system is presented with a focus on actively used polymer adhesives and the recently implemented prosthesis-supporting osseointegrated implants, with an emphasis on their creation from 3D-printed polymers. The successful prosthetics is discussed in terms of the specificity of polymer materials at the restoration site. The approaches and technological prospects are also explored through the examples of the nasal, auricle and ocular prostheses, ranging from prototypes to end-use products.

Slipped capital femoral epiphysis after tumor prosthesis implantation in a patient receiving chemotherapy.

While the usual etiology of slipped capital femoral epiphysis (SCFE) is idiopathic, there are many other factors that increase the predisposition to slippage. Chemotherapy can be one of them. In this article, we report a rare case of acute SCFE after tumor prosthesis implantation in a patient who received chemotherapy. A 10-year-old girl with osteosarcoma of the right distal femur underwent (neo-) adjuvant chemotherapy, wide tumor resection, and reconstruction using a growing tumor prosthesis and a short non-cemented femoral stem. Half a year after implantation, she developed aseptic loosening. Revision surgery was performed using a hydroxyapatite (HA)-coated cementless femoral stem. Postoperative plain radiographs revealed SCFE that was treated by closed reduction and screw fixation. The patient recovered without complications, and unaffected hip showed no radiographic signs of slippage on follow-up. The forces of implanting a tumor prosthesis, particularly with a non-cemented stem, can increase the risk of an acute SCFE. The controversy over prophylactic pinning of the uninvolved hip in chemotherapy-associated SCFE is unresolved. Pinning can be considered only in the presence of abnormal prodromal radiological findings.

Comparisons of noncoronary sinus pivot implantation (NCPI) and conventional method for transcatheter aortic valve replacement with self-expanding valve in pure aortic regurgitation (PAR).

BACKGROUND: As compared to treatment of aortic stenosis (AS), transcatheter aortic valve replacement (TAVR) using the commercially available valves to treat pure aortic regurgitation (PAR) has a lower device success rate and higher complication rates. AIMS: The study compared the acute results between TAVR using a novel noncoronary sinus pivot implantation (NCPI) method and that using the conventional method, aiming to explore a more optimized and effective operation method for TAVR in PAR. METHODS: PAR patients who underwent TAVR with self-expanding valves in our center from September 2021 to September 2023 were enrolled were divided into the NCPI (group A, N = 16) and conventional method (group B, N = 39) groups. We analyzed the pre-operative evaluation parameters and procedural and postoperative data of the two subgroups. RESULTS: The total patients' mean age was 71.2 ± 8.7 years and most were male (61.8%), with a mean Society of Thoracic Surgeons score of 3.4 ± 1.9%. The device success rate of groups A and B was 100% and 71.8%, respectively. In group B, 48.7% had major adverse cardiac events (MACE); 46.2% patients had permanent pacemaker implantation or valve in valve implantation. None had MACE in group A. The noncoronary sinus implantation depth in NCPI was -1.1 + 1.0 and 4.2 + 3.7 mm in groups A and B (p < 0.001), respectively. CONCLUSIONS: TAVR with a self-expanding valve using the NCPI method had a higher procedure success rate and dramatically low complications than that using the conventional method in PAR patients.

Use of Soft Penile Prosthesis in Grafting Surgery for Peyronie's Disease and Mild Erectile Dysfunction: Still an Option?

BACKGROUND: Plaque incision and grafting (PEG) is a primary surgical therapy for severe penile curvature in Peyronie's disease (PD); However, it can increase the risk of erectile dysfunction (ED), particularly in patients with pre-operative mild ED. Soft penile prosthesis (SPP) implantation is a viable treatment option in such cases. This study aims to compare the outcomes of PEG-only approach to PEG plus SPP implantation. METHODS: Between 2010 and 2019, 32 patients with PD and mild ED (5-item version of the International Index of Erectile Function scores: 17-21) underwent PEG surgery. Two groups were defined based on the surgery type: PEG-only and PEG plus SPP. The long-term outcomes included correction of penile bending, erection quality, intercourse ability, penile length and sensitivity. The overall satisfaction and impact of surgery on sexual activity and quality of life were also assessed. RESULTS: Of the 32 patients, 13 (40.6%) underwent PEG-only surgery, whereas 19 (59.4%) underwent PEG plus SPP. No significant differences were noted between the groups regarding pre-operative characteristics (all p > 0.1) or intra- and post-operative complication rates (all p > 0.2). The median patch area was larger in the PEG-only group (28 cm2 vs. 16.2 cm2; p = 0.001), whereas patients in the PEG plus SPP group were more likely to receive a single patch implant (100% vs. 53.8%; p < 0.001). The penile length increased in 18 patients (61.6%), with significant differences between the two groups (30% vs. 81.2%; p = 0.03). Overall, 14 patients (53.8%) reported greater satisfaction with their sexual life post-operatively, with comparable rates between the groups (p = 0.2). No significant differences were found in the post-operative 5-item version of the International Index of Erectile Function scores or severe post-operative ED (all p > 0.5). CONCLUSIONS: SPP placement during corporoplasty in patients with mild ED is safe and feasible, and it may be a suitable option for patients uncertain about inflatable prosthesis placement. The use of SPP resulted in longer penile lengths and necessitated smaller grafts. However, further data are required to understand the long-term clinical implications of this approach.