Simultaneous immobilization of multiple heavy metal(loid)s in contaminated water and alkaline soil inoculated Fe/Mn oxidizing bacterium.

Two strains of Fe/Mn oxidizing bacteria tolerant to high concentrations of multiple heavy metal(loid)s and efficient decontamination for them were screened. The surface of the bio-Fe/Mn oxides produced by the oxidation of Fe(II) and Mn(II) by Pseudomonas taiwanensis (marked as P4) and Pseudomonas plecoglossicida (marked as G1) contains rich reactive oxygen functional groups, which play critical roles in the removal efficiency and immobilization of heavy metal(loid)s in co-contamination system. The isolated strains P4 and G1 can grow well in the following environments: pH 5-9, NaCl 0-4%, and temperature 20-30°C. The removal efficiencies of Fe, Pb, As, Zn, Cd, Cu, and Mn are effective after inoculation of the strains P4 and G1 in the simulated water system (the initial concentrations of heavy metal(loid) were 1 mg/L), approximately reaching 96%, 92%, 85%, 67%, 70%, 54% and 15%, respectively. The exchangeable and carbonate bound As, Cd, Pb and Cu are more inclined to convert to the Fe-Mn oxide bound fractions in P4 and G1 treated soil, thereby reducing the phytoavailability and bioaccessible of heavy metal(loid)s. This research provides alternatives method to treat water and soil containing high concentrations of multi-heavy metal(loid)s.

Carbon Source and Substrate Surface Affect Biofilm Formation by the Plant-Associated Bacterium Pseudomonas donghuensis P482.

The ability of bacteria to colonize diverse environmental niches is often linked to their competence in biofilm formation. It depends on the individual characteristics of a strain, the nature of the colonized surface (abiotic or biotic), or the availability of certain nutrients. Pseudomonas donghuensis P482 efficiently colonizes the rhizosphere of various plant hosts, but a connection between plant tissue colonization and the biofilm formation ability of this strain has not yet been established. We demonstrate here that the potential of P482 to form biofilms on abiotic surfaces and the structural characteristics of the biofilm are influenced by the carbon source available to the bacterium, with glycerol promoting the process. Also, the type of substratum, polystyrene or glass, impacts the ability of P482 to attach to the surface. Moreover, P482 mutants in genes associated with motility or chemotaxis, the synthesis of polysaccharides, and encoding proteases or regulatory factors, which affect biofilm formation on glass, were fully capable of colonizing the root tissue of both tomato and maize hosts. Investigating the role of cellular factors in biofilm formation using these plant-associated bacteria shows that the ability of bacteria to form biofilm on abiotic surfaces does not necessarily mirror its ability to colonize plant tissues. Our research provides a broader perspective on the adaptation of these bacteria to various environments.

Interspecies Interaction of Bacteria Listeria monocytogenes, Yersinia pseudotuberculosis, and Marine Saprotrophs during Long-Term Culturing in Biofilms.

All bacterial strains studied retained the viability and ability to form both mono- and polycultural biofilms under conditions of long-term culturing in artificial seawater at 6°C and without addition of nutrients. Bacillus sp. and Pseudomonas japonica presumably stimulated the growth and reproduction of the pathogenic bacteria Listeria monocytogenes and Yersinia pseudotuberculosis. Preserved cell viability in a monoculture biofilm for a long period without adding a food source can indicate allolysis. At the same time, in a polycultural biofilm, the metabolites secreted by saprotrophic strains can stimulate the growth of L. monocytogenes and Y. pseudotuberculosis.

Endophyte-assisted non-host plant Tillandsia brachycaulos enhance indoor formaldehyde removal.

This study investigated the use of endophyte-assisted Tillandsia brachycaulos to enhance formaldehyde removal in indoor environments. A formaldehyde-degrading endophyte from the root of Epipremnum aureum, Pseudomonas plecoglossicida, was identified and used for inoculation. Among the inoculation methods, spraying proved to be the most effective, resulting in a significant 35 % increase in formaldehyde removal after 36 hours. The results of the light exposure experiment (3000 Lux) demonstrate that an increase in light intensity reduces the efficiency of the Tillandsia brachycaulos-microbial system in degrading formaldehyde. In a 15-day formaldehyde fumigation experiment at 2 ppm in a normal indoor environment, the inoculated Tillandsia brachycaulos exhibited removal efficiency ranging from 42.53 % to 66.13 %, while the uninoculated declined from 31.62 % to 3.17 %. The Pseudomonas plecoglossicida (referred to as PP-1) became the predominant bacteria within the Tillandsia brachycaulos after fumigation. Moreover, the endophytic inoculation effectively increased the resistance and tolerance of Tillandsia brachycaulos to formaldehyde, as evidenced by lower levels of hydroxyl radical, malondialdehyde (MDA), free protein, and peroxidase activity (POD), as well as higher chlorophyll content compared to uninoculated Tillandsia brachycaulos. These findings indicate that the combination of endophytic bacteria and Tillandsia brachycaulos has significant potential for improving indoor air quality.

Exploring the potential of two Pseudomonas species to produce vincristine from vinblastine via biotransformation.

A biotransformation pair consisting of vinblastine: vincristine present in the Catharanthus roseus plant is of immense pharmacological significance. In this study, we successfully transformed vinblastine into vincristine outside the plant using Pseudomonas aeruginosa 8485 and Pseudomonas fluorescens 2421 and evaluated the antiangiogenic potential of thus produced vincristine through the CAM assay. The toxicity assay showed that both Pseudomonas spp. can tolerate varying concentrations (25-100 µl of 1 mg/ml) of vinblastine. The biotransformation was performed in a liquid nutrient broth medium containing vinblastine (25-100 µl), and Pseudomonas spp. inoculums (50-150 µl) by incubating at 30 °C and 37 °C, respectively for 8 days. The process was optimized for substrate and culture concentrations, pH, temperature, and rotation speed (rpm) for the highest conversion. Analysis using LC-MS/MS confirmed the presence of vincristine as a product of the vinblastine biotransformation by two Pseudomonas spp. P. fluorescens 2421 showed a faster conversion rate with 95% of vinblastine transformed within 24 h than P. aeruginosa 8485, which demonstrated a conversion rate of 92% on the 8th day. From LC-MS/MS analysis, the optimal conditions for the reaction were determined as vinblastine (25 µl), microbial inoculums (150 µl or 200 × 106 and 210 × 106 CFU/ml), pH 7.4, rotation speed of 180 rpm, and temperatures of 30 °C and 37 °C with incubation time of 8 days. The vincristine produced exhibited potent antiangiogenic activity in the CAM assay reducing the thickness and branching of blood vessels in a dose-dependent manner. The study concludes that both Pseudomonas spp. showed promise for vincristine production from vinblastine, without compromising its antiangiogenic properties.

Antifungal metabolites produced by Pseudomonas hunanensis SPT26 effective in biocontrol of fusarium wilt of Lycopersicum esculentum under saline conditions.

In past few years, salinity has become one of the important abiotic stresses in the agricultural fields due to anthropogenic activities. Salinity is leading towards yield losses due to soil infertility and increasing vulnerability of crops to diseases. Fluorescent pseudomonads are a diverse group of soil microorganisms known for promoting plant growth by involving various traits including protecting crops from infection by the phytopathogens. In this investigation, salt tolerant plant growth promoting bacterium Pseudomonas hunanensis SPT26 was selected as an antagonist against Fusarium oxysporum, causal organism of fusarium wilt in tomato. P. hunanensis SPT26 was found capable to produce various antifungal metabolites. Characterization of purified metabolites using Fourier transform infrared spectroscopy (FT-IR) and liquid chromatography-electron spray ionization-mass spectrometry (LC-ESI/MS) showed the production of various antifungal compounds viz., pyrolnitrin, pyochelin and hyroxyphenazine by P. hunanensis SPT26. In the preliminary examination, biocontrol activity of purified antifungal metabolites was checked by dual culture method and results showed 68%, 52% and 65% growth inhibition by pyrolnitrin, 1- hydroxyphenazine and the bacterium (P. hunanensis SPT26) respectively. Images from scanning electron microscopy (SEM) revealed the damage to the mycelia of fungal phytopathogen due to production of antifungal compounds secreted by P. hunanensis SPT26. Application of bioinoculant of P. hunanensis SPT26 and purified metabolites significantly decreased the disease incidence in tomato and increased the plant growth parameters (root and shoot length, antioxidant activity, number of fruits per plant, etc.) under saline conditions. The study reports a novel bioinoculant formulation with the ability to promote plant growth parameters in tomato in presence of phytopathogens even under saline conditions.

Development of Aptamer-Functionalized Gold Nanoparticles as Probes in Point-of-Care Diagnostic Device for Rapid Detection of Multidrug-Resistant Bacteria in Bombyx mori L. .

The sericulture industry suffers severe crop losses due to various silkworm diseases, necessitating the development of further technologies for rapid pathogen detection. Here, we report an all-in-one portable biosensor that combines conjugated gold nanoparticles (Au NPs) with an aptamer-based lateral flow assay (LFA) platform for the real-time analysis of Mammaliicoccus sp. and Pseudomonas sp. Our platform enables sample-to-answer naked eye detection within 5 min without any cross-reactivity with other representatives of the silkworm pathogenic bacterial group. This assay was based on the sandwich-type format using a bacteria-specific primary aptamer (Apt1) conjugated with 23 nm ± 1.27 nm Au NPs as a signal probe and another bacteria-specific secondary aptamer (Apt2)-coated nitrocellulose membrane as a capture probe. The hybridization between the signal probe and the capture probe in the presence of bacteria develops a red band in the test line, whose intensity is directly proportional to the bacterial concentration. Under the optimal experimental conditions, the visual limit of detection of the strip for Mammaliicoccus sp. and Pseudomonas sp. was 1.5 × 104 CFU/mL and 1.5 × 103 CFU/mL, respectively. Additionally, the performance of the LFA device was validated by using a colorimetric assay, and the results from the colorimetric assay are consistent with those obtained from the LFA. Our findings indicate that the developed point-of-care diagnostic device has significant potential for providing a cost-effective, scalable alternative for the rapid detection of silkworm pathogens.

Tracking atrazine degradation in soil combining 14C-mineralisation assays and compound-specific isotope analysis.

The quantification of pesticide dissipation in agricultural soil is challenging. In this study, we investigated atrazine biodegradation in both liquid and soil experiments bioaugmented with distinct atrazine-degrading bacterial isolates. This was achieved by combining 14C-mineralisation assays and compound-specific isotope analysis of atrazine. In liquid experiments, the three bacterial isolates mineralised over 40% of atrazine, demonstrating their potential for extensive degradation. However, the kinetics of mineralisation and degradation varied among the isolates. Carbon stable isotope fractionation was similar for Pseudomonas isolates ADPT34 and ADP2T0, but slightly higher for Chelatobacter SR27. In soil experiments, atrazine primarily degraded into atrazine-desethyl, while atrazine-hydroxy was mainly observed in experiments with SR27. Atrazine mineralisation in soil by ADPT34 and SR27 exceeded 40%, whereas ADP2T0 exhibited a mineralisation rate of 10%. In experiments with ADPT34 and SR27, atrazine 14C-residues were predominantly found in the non-extractable fraction, whereas they accumulated in the extractable fraction in the experiment with ADP2T0. Compound-specific isotope analysis (CSIA) relies on changes of stable isotope ratios and holds potential to evaluate herbicide transformation in soil. CSIA of atrazine indicated atrazine biodegradation in water and solvent extractable soil fractions and varied between 29% and 52%, depending on the bacterial isolate. Despite atrazine degradation in both soil fractions, a significant portion of atrazine residues persisted, depending on the bacterial degrader, initial cell concentration, and mineralisation and degradation rates. Overall, our approach can aid in quantifying atrazine persistence and degradation in soil, and in optimizing bioaugmentation strategies for remediating soils contaminated with persistent herbicides.

Characterization of a novel multi-resistant Pseudomonas juntendi strain from China with chromosomal blaVIM-2 and a megaplasmid coharboring blaIMP-1-like and blaOXA-1.

BACKGROUND: Pseudomonas juntendi is a newly identified opportunistic pathogen, of which we have limited understanding. P. juntendi strains are often multidrug resistant, which complicates clinical management of infection. METHODS: A strain of Pseudomonas juntendi (strain L4326) isolated from feces was characterized by MALDI-TOF-MS and Average Nucleotide Identity BLAST. This strain was further subject to whole-genome sequencing and Maximum Likelihood phylogenetic analysis. The strain was phenotypically characterized by antimicrobial susceptibility testing and conjugation assays. RESULTS: We have isolated the novel P. juntendi strain L4236, which was multidrug resistant, but retained sensitivity to amikacin. L4236 harbored a megaplasmid that encoded blaOXA-1 and a novel blaIMP-1 resistance gene variant. P. juntendi strain L4236 was phylogenetically related to P. juntendi strain SAMN30525517. CONCLUSION: A rare P. juntendi strain was isolated from human feces in southern China with a megaplasmid coharboring blaIMP-1-like and blaOXA-1. Antimicrobial selection pressures may have driven acquisition of drug-resistance gene mutations and carriage of the megaplasmid.

Antibiotic Resistance & Extended-Spectrum ß-Lactamase Production in Clinical and Non-Clinical Isolates in Tabuk.

The increasing prevalence of antibiotic resistance, driven by the production of extended-spectrum beta-lactamases (ESBLs), presents a critical challenge to current medical treatments, particularly in clinical settings. Understanding the distribution and frequency of ESBL-producing bacteria is essential for developing effective control strategies. This study investigated the antibiotic resistance and extended-spectrum beta-lactamase (ESBL) production in bacterial isolates in clinical and non-clinical (food) specimens in Tabuk, KSA. A total of 57 bacterial isolates were analysed, with E. coli and Pseudomonas sp. being the most prevalent. High resistance rates were observed, particularly against third-generation cephalosporins in clinical isolates. ESBL screening revealed a significant prevalence in clinical samples (58.3%), with E. coli showing the highest positivity. Conversely, only a low percentage of food isolates were ESBL positive. Molecular analysis confirmed the presence of various ESBL genes, with blaCTX-M being the most frequent, predominantly found in clinical isolates. This study highlights the concerning levels of antibiotic resistance and ESBL production in the region, emphasising the need for effective infection control measures and prudent antibiotic use.

Surface effects on functional amyloid formation.

Functional amyloids formed by the protein FapC in Pseudomonas bacteria are key structural components of Pseudomonas biofilms, which mediate chronic infections and also contribute to antimicrobial resistance. Here, we combine kinetic experiments with mechanistic modelling to probe the role of surfaces in FapC functional amyloid formation. We find that nucleation of new fibrils is predominantly heterogeneous in vitro, being catalysed by reaction vessel walls but not by the air/water interface. Removal of such interfaces by using microdroplets greatly slows heterogeneous nucleation and reveals a hitherto undetected fibril surface-catalysed "secondary nucleation" reaction step. We tune the degree of catalysis by varying the interface chemistry of the reaction vessel and by adding nanoparticles with tailored surface properties that catalyse fibril nucleation. In so doing, we discover that the rate of nucleation is controlled predominantly by the strength with which FapC binds to the catalytic sites on the interface, and by its surface area. Surprisingly, neither primary nucleation rate nor catalytic site binding strength appear closely correlated to the charge and hydrophilicity of the interface. This indicates the importance of considering experimental design in terms of surface chemistry of the reaction container while also highlighting the notion that fibril nucleation during protein aggregation is a heterogeneous process.

Aflatoxin B1 Control by Various Pseudomonas Isolates.

The climate-change-coupled fungal burden in crop management and the need to reduce chemical pesticide usage highlight the importance of finding sustainable ways to control Aspergillus flavus. This study examines the effectiveness of 50 Pseudomonas isolates obtained from corn rhizospheres against A. flavus in both solid and liquid co-cultures. The presence and quantity of aflatoxin B1 (AFB1) and AFB1-related compounds were determined using high-performance liquid chromatography-high resolution mass spectrometry analysis. Various enzymatic- or non-enzymatic mechanisms are proposed to interpret the decrease in AFB1 production, accompanied by the accumulation of biosynthetic intermediates (11-hydroxy-O-methylsterigmatocystin, aspertoxin, 11-hydroxyaspertoxin) or degradation products (the compounds C16H10O6, C16H14O5, C18H16O7, and C19H16O8). Our finding implies the upregulation or enhanced activity of fungal oxidoreductases and laccases in response to bacterial bioactive compound(s). Furthermore, non-enzymatic reactions resulted in the formation of additional degradation products due to acid accumulation in the fermented broth. Three isolates completely inhibited AFB1 or any AFB1-related compounds without significantly affecting fungal growth. These bacterial isolates supposedly block the entire pathway for AFB1 production in the fungus during interaction. Apart from identifying effective Pseudomonas isolates as potential biocontrol agents, this work lays the foundation for exploring new bacterial bioactive compounds.

Discovery of the 1-naphthylamine biodegradation pathway reveals a broad-substrate-spectrum enzyme catalyzing 1-naphthylamine glutamylation.

1-Naphthylamine (1NA), which is harmful to human and aquatic animals, has been used widely in the manufacturing of dyes, pesticides, and rubber antioxidants. Nevertheless, little is known about its environmental behavior and no bacteria have been reported to use it as the growth substrate. Herein, we describe a pathway for 1NA degradation in the isolate Pseudomonas sp. strain JS3066, determine the structure and mechanism of the enzyme NpaA1 that catalyzes the initial reaction, and reveal how the pathway evolved. From genetic and enzymatic analysis, a five gene-cluster encoding a dioxygenase system was determined to be responsible for the initial steps in 1NA degradation through glutamylation of 1NA. The γ-glutamylated 1NA was subsequently oxidized to 1,2-dihydroxynaphthalene which was further degraded by the well-established pathway of naphthalene degradation via catechol. A glutamine synthetase-like (GS-like) enzyme (NpaA1) initiates 1NA glutamylation, and this enzyme exhibits a broad substrate selectivity toward a variety of anilines and naphthylamine derivatives. Structural analysis revealed that the aromatic residues in the 1NA entry tunnel and the V201 site in the large substrate-binding pocket significantly influence NpaA1's substrate preferences. The findings enhance understanding of degrading polycyclic aromatic amines, and will also enable the application of bioremediation at naphthylamine contaminated sites.

A salicylic acid-associated plant-microbe interaction attracts beneficial Flavobacterium sp. to the Arabidopsis thaliana phyllosphere.

Both above- and below-ground parts of plants are constantly challenged with microbes and interact closely with them. Many plant-growth-promoting rhizobacteria, mostly interacting with the plant's root system, enhance the immunity of plants in a process described as induced systemic resistance (ISR). Here, we characterized local induced resistance (IR) triggered by the model PGPR Pseudomonas simiae WCS417r (WCS417) in Arabidopsis thaliana. Hydroponic application of WCS417 to Arabidopsis roots resulted in propagation of WCS417 in/on leaves and the establishment of local IR. WCS417-triggered local IR was dependent on salicylic acid (SA) biosynthesis and signalling and on functional biosynthesis of pipecolic acid and monoterpenes, which are classically associated with systemic acquired resistance (SAR). WCS417-triggered local IR was further associated with a priming of gene expression changes related to SA signalling and SAR. A metabarcoding approach applied to the leaf microbiome revealed a significant local IR-associated enrichment of Flavobacterium sp.. Co-inoculation experiments using WCS417 and At-LSPHERE Flavobacterium sp. Leaf82 suggest that the proliferation of these bacteria is influenced by both microbial and immunity-related, plant-derived factors. Furthermore, application of Flavobacterium Leaf82 to Arabidopsis leaves induced SAR in an NPR1-dependent manner, suggesting that recruitment of this bacterium to the phyllosphere resulted in propagation of IR. Together, the data highlight the importance of plant-microbe-microbe interactions in the phyllosphere and reveal Flavobacterium sp. Leaf82 as a new beneficial promoter of plant health.

Pseudomonas fragariae sp. nov., a novel bacterial species causing leaf spots on strawberry (Fragaria×ananassa).

In Florida, angular leaf spot, caused by Xanthomonas fragariae, was the only known bacterial disease in strawberry, which is sporadic and affects the foliage and calyx. However, from the 2019-2020 to 2023-2024 Florida strawberry seasons, unusual bacterial-like symptoms were observed in commercial farms, with reports of up to 30 % disease incidence. Typical lesions were water-soaked and angular in early stages that later became necrotic with a circular-ellipsoidal purple halo, and consistently yielded colonies resembling Pseudomonas on culture media. Strains were pathogenic on strawberry, fluorescent, oxidase- and arginine-dihydrolase-negative, elicited a hypersensitive reaction on tobacco, and lacked pectolytic activity. Although phenotypic assays, such as fatty acid methyl profiles and Biolog protocols, placed the strains into the Pseudomonas group, there was a low similarity at the species level. Further analysis using 16S rRNA genes, housekeeping genes, and whole genome sequencing showed that the strains cluster into the Pseudomonas group but do not share more than 95 % average nucleotide identity compared to representative members. Therefore, the genomic and phenotypic analysis confirm that the strains causing bacterial spot in strawberry represent a new plant pathogenic bacterial species for which we propose the name Pseudomonas fragariae sp. nov. with 20-417T (17T=LMG 32456T=DSM 113340 T) as the type strain, in relation to Fragaria×ananassa, the plant species from which the pathogen was first isolated. Future work is needed to assess the epidemiology, cultivar susceptibility, chemical sensitivity, and disease management of this possible new emerging strawberry pathogen.

Enhancing biodegradation efficiency of PLA/PBAT-ST20 bioplastic using thermophilic bacteria co-culture system: New insight from structural characterization, enzyme activity, and metabolic pathways.

The rising utilization of PLA/PBAT-ST20 presents potential ecological risks stemming from its casual disposal and incomplete degradation. To solve this problem, this study investigated the degradation capabilities of PLA/PBAT-ST20 by a co-culture system comprising two thermophilic bacteria, Pseudomonas G1 and Kocuria G2, selected and identified from the thermophilic phase of compost. Structural characterization results revealed that the strains colonized the PLA/PBAT-ST20's surface, causing holes and cracks, with an increase in the carbonyl index (CI) and polydispersity index (PDI), indicating oxidative degradation. Enzyme activity results demonstrated that the co-culture system significantly enhanced the secretion and activity of proteases and lipases, promoting the breakdown of ester bonds. LC-QTOF-MS results showed that various intermediate products were obtained after degradation, ultimately participating in the TCA cycle (ko00020), further completely mineralized. Additionally, after 15-day compost, the co-culture system achieved a degradation rate of 72.14 ± 2.1 wt% for PBAT/PLA-ST20 films, with a decrease in the abundance of plastic fragments of all sizes, demonstrating efficient degradation of PLA/PBAT-ST20 films. This study highlights the potential of thermophilic bacteria to address plastic pollution through biodegradation and emphasizes that the co-culture system could serve as an ideal solution for the remediation of PLA/PBAT plastics.

Starch-chitosan-Taro mucilage nanocomposite active food packaging film doped with zinc oxide nanoparticles - Fabrication, mechanical properties, anti-bacterial activity and eco toxicity assessment.

In this research, a novel active food packaging material was developed by blending starch, chitosan, and plant-based mucilage with zinc oxide nanoparticles. The polymeric nanocomposite film, created by incorporating zinc oxide nanoparticles into the mixture using a straightforward approach, was analyzed for its structural and functional attributes using FTIR, XRD, SEM, and TGA/DSC. These analyses revealed a robust interaction between the polymers' functional groups and the nanoparticles, forming a stable film. The film's mechanical properties, including tensile strength and Young's modulus, were high. It also showed reduced wettability and water solubility, enhancing water resistance. The biodegradability rate was 100 %. Antibacterial tests against Bacillus sp. and Pseudomonas sp. showed significant inhibition zones of 26 mm and 30 mm, respectively, demonstrating strong antibacterial effectiveness. The film's non-target toxicity was assessed through phytotoxicity experiments on Vigna angularis and soil nutrient evaluations, with no negative impact on plant growth or soil health observed. These results indicate that this nanocomposite is a safe, biocompatible option for food packaging.

A newly identified algicidal bacterium of Pseudomonas fragi YB2: Algicidal compounds and effects.

Harmful algal bloom (HAB) is an unresolved existing problem worldwide. Here, we reported a novel algicidal bacterium, Pseudomonas fragi YB2, capable of lysing multiple algal species. To Chlorella vulgaris, YB2 exhibited a maximum algicidal rate of 95.02 % at 120 h. The uniqueness of YB2 lies in its ability to self-produce three algicidal compounds: 2-methyl-1, 3-cyclohexanedione (2-MECHD), N-phenyl-2-naphthylamine, and cyclo (Pro-Leu). The algicidal properties of 2-MECHD have not been previously reported. YB2 significantly affected the chloroplast and mitochondrion, thus decreasing in chlorophyll a by 4.74 times for 120 h and succinate dehydrogenase activity by 103 times for 36 h. These physiological damages disrupted reactive oxygen species and Ca2+ homeostasis at the cellular level, increasing cytosolic superoxide dismutase (23 %), catalase (35 %), and Ca2+ influx. Additionally, the disruption of Ca2+ homeostasis rarely reported in algicidal bacteria-algae interaction was observed using the non-invasive micro-test technology. We proposed a putative algicidal mechanism based on the algicidal outcomes and physiological algicidal effects and explored the potential of YB2 through an algicidal simulation test. Overall, this study is the first to report the algicidal bacterium P. fragi and identify a novel algicidal compound, 2-MECHD, providing new insights and a potent microbial resource for the biocontrol of HAB.

Bioinspired Sulfobetaine Borneol Fluorinated Amphiphilic Polymers for Marine Antifouling and Fouling Release Applications.

The development of nontoxic antifouling coatings in static marine environments is urgent. Herein, the successful synthesis of sulfobetaine borneol fluorinated polymers (PEASBF) by a free radical polymerization method is reported. The PEASBF coatings exhibit outstanding antifouling activity, which effectively resists the adhesion of Bovine serum albumin (FITC-BSA adhesion rate: 0.5%), Pseudomonas sp. (Biofilm: 1.3 absorbance) and Navicula sp. (Diatom attachment rate: 33%). More importantly, the PEASBF coatings display outstanding fouling release properties, achieving a release rate of 98% for Navicula sp., and the absorbance of the Pseudomonas sp. biofilm is only 0.2 under 10 Pa shear stress. XPS and MD studies showed that the fluorinated/isobornyl groups induce more sulfobetaine groups to migrate toward polymer surfaces for intensify antifouling. Additionally, the chiral stereochemical structure of borneol enhances antifouling and fouling release ability of amphiphilic polymers. Therefore, the PEASBF has the potential for static marine antifouling applications.

Removal of Heavy Metals by Pseudomonas sp. - Model Fitting and Interpretation.

Industrial and urban modernization processes generate significant amounts of heavy metal wastewater, which brings great harm to human production and health. The biotechnology developed in recent years has gained increasing attention in the field of wastewater treatment due to its repeatable regeneration and lack of secondary pollutants. Pseudomonas, being among the several bacterial biosorbents, possesses notable benefits in the removal of heavy metals. These advantages encompass its extensive adsorption capacity, broad adaptability, capacity for biotransformation, potential for genetic engineering transformation, cost-effectiveness, and environmentally sustainable nature. The process of bacterial adsorption is a complex phenomenon involving several physical and chemical processes, including adsorption, ion exchange, and surface and contact phenomena. A comprehensive investigation of parameters is necessary in order to develop a mathematical model that effectively measures metal ion recovery and process performance. The aim of this study was to explore the latest advancements in high-tolerance Pseudomonas isolated from natural environments and evaluate its potential as a biological adsorbent. The study investigated the adsorption process of this bacterium, examining key factors such as strain type, contact time, initial metal concentration, and pH that influenced its effectiveness. By utilizing dynamic mathematical models, the research summarized the biosorption process, including adsorption kinetics, equilibrium, and thermodynamics. The findings indicated that Pseudomonas can effectively purify water contaminated with heavy metals and future research will aim to enhance its adsorption performance and expand its application scope for broader environmental purification purposes.