ABSTRACT
In present work, blue carbon dots (b-CDs) were derived from ammonium citrate and guanidine hydrochloride, and red carbon dots (r-CDs) were stemmed from malonate, ethylenediamine and mesotetra (4-carboxyphenyl) porphin based on facile hydrothermal method. Eco-friendly ratiometric fluorescence probe was innovatively constructed to effectively measure Hg2+ utilizing b-CDs and r-CDs. The developed probe displayed two typical emission peaks at 450 nm from b-CDs and 650 nm from r-CDs under the excitation at 360 nm. Mercury ion has strong quenching effect on the fluorescence intensity at 450 nm due to the electron transfer process and the fluorescence change at 450 nm was used as the response signal, whereas the fluorescence intensity at 650 nm kept unchangeable which resulted from the chemical inertness between Hg2+ and r-CDs, serving as the reference signal in the sensing system. Under optimal circumstances, this probe exhibited an excellent linearity between the fluorescence response values of ΔF450/F650 and Hg2+ concentrations over range of 0.01-10 µmol/L, and the limit of detection was down to 5.3 nmol/L. Furthermore, this probe was successfully employed for sensing Hg2+ in practical environmental water samples with satisfied recoveries of 98.5%-105.0%. The constructed ratiometric fluorescent probe provided a rapid, environmental-friendly, reliable, and efficient platform for measuring trace Hg2+ in environmental field.
Subject(s)
Carbon , Fluorescent Dyes , Mercury , Quantum Dots , Water Pollutants, Chemical , Mercury/analysis , Carbon/chemistry , Fluorescent Dyes/chemistry , Water Pollutants, Chemical/analysis , Quantum Dots/chemistry , Environmental Monitoring/methods , Spectrometry, Fluorescence/methods , Limit of Detection , FluorescenceABSTRACT
Pesticides in environmental samples pose significant risks to ecosystems and human health since they require precise and efficient detection methods. Imidacloprid (IMI), a widely used neonicotinoid insecticide, exemplifies these hazards due to its potential toxicity. This study addresses the urgent need for improved monitoring of such contaminants by introducing a novel fluorometric method for detecting IMI using nitrogen-doped graphite carbon dots (N-GCDs). The sensor operates by quenching fluorescence through the interaction of Cu2+ ions with N-GCDs. Subsequently, IMI binds to the imidazole group, chelates with Cu2+, and restores the fluorescence of N-GCDs. This alternating fluorescence behavior allows for the accurate identification of both Cu2+ and IMI. The sensor exhibits linear detection ranges of 20-100 nM for Cu2+ and 10-140 µg/L for IMI, with detection limits of 18 nM and 1.2 µg/L, respectively. The high sensitivity of this sensor enables the detection of real-world samples, which underscores its potential for practical use in environmental monitoring and agricultural safety.
Subject(s)
Copper , Environmental Monitoring , Fluorometry , Graphite , Neonicotinoids , Nitro Compounds , Nitrogen , Quantum Dots , Neonicotinoids/analysis , Neonicotinoids/chemistry , Nitro Compounds/chemistry , Nitro Compounds/analysis , Copper/chemistry , Copper/analysis , Nitrogen/chemistry , Graphite/chemistry , Quantum Dots/chemistry , Insecticides/analysis , Insecticides/chemistry , Imidazoles/chemistryABSTRACT
Metformin, the primary therapy for type 2 diabetes mellitus (T2DM), showed limitations such as varying absorption, rapid system clearance, required large amount, resistance, longstanding side effects. Use of Nano formulations for pharmaceuticals is emerging as a viable technique to reduce negative consequences of drug, while simultaneously attaining precise release and targeted distribution. This study developed a Polyethylene Glycol conjugated Graphene Oxide Quantum dots (GOQD-PEG) nanocomposite for the sustained release of metformin. Herein, we evaluated the effectiveness of metformin-loaded nanoconjugate in in vitro insulin resistance model. Results demonstrated drug loaded nanoconjugate successfully restored glucose uptake and reversed insulin resistance in in vitro conditions at reduced dosage compared to free metformin.
Subject(s)
Delayed-Action Preparations , Graphite , Insulin Resistance , Metformin , Nanoconjugates , Polyethylene Glycols , Quantum Dots , Graphite/chemistry , Quantum Dots/chemistry , Metformin/administration & dosage , Metformin/pharmacology , Metformin/pharmacokinetics , Metformin/chemistry , Polyethylene Glycols/chemistry , Nanoconjugates/chemistry , Delayed-Action Preparations/chemistry , Delayed-Action Preparations/pharmacokinetics , Humans , Hypoglycemic Agents/administration & dosage , Hypoglycemic Agents/pharmacology , Hypoglycemic Agents/chemistry , Drug Delivery Systems , Diabetes Mellitus, Type 2/drug therapy , Glucose/metabolism , Glucose/chemistryABSTRACT
On-demand dissolution of hydrogels has shown much potential in easy and pain-free removal of wound dressings. This work firstly describes a type of carbon dots (CDs) for dissolving Ca-alginate hydrogel via site-specific mineralization method. The CDs were characterized by two features, which included presence of primary/secondary amine groups and generation of calcium crystals with Ca2+. Especially, the amount of primary/secondary amine groups on CDs played key role in determining whether hydrogel could be dissolved. When there were sufficient primary/secondary amine groups, the mineralization occurred on CDs rather than alginates due to the hydrogen bond between primary/secondary amine and carboxyl of alginates. Thereby, this promoted the gel-sol transition through Ca2+ capture from the hydrogels. Moreover, antibacterial test revealed Ca2+ capture from cell walls, while in vivo test revealed hypoxia relief due to porous structures of the renewed hydrogels. Overall, CDs with sufficient primary/secondary amine groups could dissolve Ca-alginate hydrogel through site-specific mineralization method, accompanying by additional functions of antibacterial and hypoxia relief.
Subject(s)
Alginates , Anti-Bacterial Agents , Carbon , Hydrogels , Wound Healing , Alginates/chemistry , Hydrogels/chemistry , Carbon/chemistry , Animals , Wound Healing/drug effects , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Quantum Dots/chemistry , Calcium/chemistry , Mice , Staphylococcus aureus/drug effects , Escherichia coli/drug effectsABSTRACT
The synthesis of cobalt nanocrystal-graphene quantum dot-Ti3C2TX monolithic film electrode (Co-GQD-Ti3C2TX) is reported via self-assembly of Ti3C2TX nanosheets induced by protonated arginine-functionalized graphene quantum dot and subsequent reduction of cobalt (III). The resulting Co-GQD-Ti3C2TX shows good monolithic architecture, mechanical property, dispersibility and conductivity. The structure achieves excellent supercapacitor and sensing behavior. The self-charging supercapacitor produced by printing viscous Co-GQD-Ti3C2TX hydrogel on the back of flexible solar cell surface provides high specific capacitance (296 F g-1 at 1 A g-1), high-rate capacity (153 F g-1 at 20 A g-1), capacity retention (98.1% over 10,000-cycle) and energy density (29.6 W h kg-1 at 299.9 W kg-1). The electrochemical chip produced by printing Co-GQD-Ti3C2TX hydrogel on paper exhibits sensitive electrochemical response towards uric acid. The increase of uric acid between 0.01 and 800 µM causes a linear increase in differential pulse voltammetry signal with a detection limit of 0.0032 µM. The self-powered sensing platform integrating self-charging supercapacitor, electrochemical chip and micro electrochemical workstation was contentedly applied to monitoring uric acid in sweats and shows one broad application prospect in wearable electronic health monitoring device.
Subject(s)
Cobalt , Electric Capacitance , Electrochemical Techniques , Electrodes , Graphite , Limit of Detection , Quantum Dots , Sweat , Titanium , Uric Acid , Cobalt/chemistry , Quantum Dots/chemistry , Graphite/chemistry , Sweat/chemistry , Humans , Electrochemical Techniques/methods , Electrochemical Techniques/instrumentation , Titanium/chemistry , Uric Acid/analysis , Uric Acid/chemistry , Biosensing Techniques/methods , Nanoparticles/chemistryABSTRACT
The research outlined a novel approach for creating a sensitive and efficient ratio fluorescent probe for ciprofloxacin (CIP) detection. The method used the biomass materials passionfruit shell and diethylenetriamine as carbon and nitrogen sources, respectively, to prepare blue fluorescent carbon quantum dots (b-CQDs) with an average size of 3.29 nm and a quantum yield of 19.6% by a hydrothermal method. The newly designed b-CQDs/riboflavin ratio fluorescent probe demonstrates a distinct advantage for CIP monitoring, exhibiting a marked increase in fluorescence intensity at 445 nm upon interaction with CIP, while maintaining a stable intensity at 510 nm. In the water system, the I445 nm/I510 nm ratio of the fluorescent probe showed a significant linear relationship with CIP at the concentrations of 0-250 µmol·L-1, and the probe boasts a low detection limit of 0.86 µmol·L-1. The outstanding selectivity, broad detection range, low detection limits, and high quantum yield of the b-CQDs highlight their significant potential in the development of advanced sensing probes for efficient detection of ciprofloxacin, offering promising insights for future sensor technology advancements.
Subject(s)
Carbon , Ciprofloxacin , Fluorescent Dyes , Quantum Dots , Quantum Dots/chemistry , Ciprofloxacin/analysis , Ciprofloxacin/chemistry , Ciprofloxacin/blood , Fluorescent Dyes/chemistry , Carbon/chemistry , Spectrometry, Fluorescence , Limit of DetectionABSTRACT
A dual-emission ratiometric fluorescence sensor (CDs@CdTe@MIP) with a self-calibration function was successfully constructed for AMO detection. In the CDs@CdTe@MIP system, non-imprinted polymer-coated CDs and molecule-imprinted polymer-coated CdTe quantum dots were used as the reference signal and response elements, respectively. The added AMO quenched the fluorescence of the CdTe quantum dots, whereas the fluorescence intensity of the CDs remained almost unchanged. The AMO concentration was monitored using the fluorescence intensity ratio (log(I647/I465)0/(I647/I465)) to reduce interference from the testing environment. The sensor with a low detection limit of 0.15 µg/L enabled detection of the AMO concentration within 6 min. The ratiometric fluorescence sensor was used to detect AMO in spiked pork samples; it exhibited a high recovery efficiency and relative standard deviation (RSD) of 97.94-103.70% and 3.77-4.37%, respectively. The proposed highly sensitive and selective platform opens avenues for sensitive, reliable, and rapid determination of pharmaceuticals in the environment and food safety monitoring using ratiometric sensors.
Subject(s)
Amoxicillin , Cadmium Compounds , Limit of Detection , Molecular Imprinting , Quantum Dots , Spectrometry, Fluorescence , Tellurium , Quantum Dots/chemistry , Cadmium Compounds/chemistry , Tellurium/chemistry , Spectrometry, Fluorescence/methods , Amoxicillin/analysis , Amoxicillin/chemistry , Fluorescent Dyes/chemistry , Sulfides/chemistry , Animals , Food Contamination/analysis , Molecularly Imprinted Polymers/chemistry , SwineABSTRACT
The nuclear pore complexes on the nuclear membrane serve as the exclusive gateway for communication between the nucleus and the cytoplasm, regulating the transport of various molecules, including nucleic acids and proteins. The present work investigates the kinetics of the transport of negatively charged graphene quantum dots through nuclear membranes, focusing on quantifying their transport characteristics. Experiments are carried out in permeabilized HeLa cells using time-lapse confocal fluorescence microscopy. Our findings indicate that negatively charged graphene quantum dots exhibit rapid transport to the nuclei, involving two distinct transport pathways in the translocation process. Complementary experiments on the nuclear import and export of graphene quantum dots validate the bi-directionality of transport, as evidenced by comparable transport rates. The study also shows that the negatively charged graphene quantum dots possess favorable retention properties, underscoring their potential as drug carriers.
Subject(s)
Active Transport, Cell Nucleus , Cell Nucleus , Graphite , Quantum Dots , Quantum Dots/chemistry , Quantum Dots/metabolism , Humans , Graphite/chemistry , HeLa Cells , Cell Nucleus/metabolism , Nuclear Envelope/metabolism , Nuclear Pore/metabolism , Microscopy, ConfocalABSTRACT
Abnormal expression in long noncoding RNAs (lncRNAs) is closely associated with cancers. Herein, a novel CRISPR/Cas13a-enhanced photocurrent-polarity-switching photoelectrochemical (PEC) biosensor was engineered for the joint detection of dual lncRNAs, using deep learning (DL) to assist in cancer diagnosis. After target lncRNA-activated CRISPR/Cas13a cleaves to induce DNAzyme bidirectional walkers with the help of cofactor Mg2+, nitrogen-doped carbon-Cu/Cu2O octahedra are introduced into the biosensor, producing a photocurrent in the opposite direction of CdS quantum dots (QDs). The developed PEC biosensor shows high specificity and sensitivity with limits of detection down to 25.5 aM for lncRNA HOTAIR and 53.1 aM for lncRNA MALAT1. More importantly, this platform for the lncRNA joint assay in whole blood can successfully differentiate cancers from healthy people. Furthermore, the DL model is applied to explore the potential pattern hidden in data of the established technology, and the accuracy of DL cancer diagnosis can acquire 93.3%. Consequently, the developed platform offers a new avenue for lncRNA joint detection and early intelligent diagnosis of cancer.
Subject(s)
Biosensing Techniques , Deep Learning , RNA, Long Noncoding , RNA, Long Noncoding/genetics , Humans , Quantum Dots/chemistry , Electrochemical Techniques , CRISPR-Cas Systems/genetics , Neoplasms/diagnosis , Neoplasms/genetics , Cadmium Compounds/chemistry , Sulfides/chemistry , Limit of Detection , Photochemical ProcessesABSTRACT
A novel and sensitive fluorescence ratiometric method is developed for urea detection based on the pH-sensitive response of two fluorescent carbon dot (CD) systems: R-CDs/methyl red (MR) and NIR-CDs/Cu2+. The sensing mechanism involves breaking down urea using the enzyme urease, releasing ammonia and increasing pH. At higher pH, the fluorescence of NIR-CDs is quenched due to the enhanced interaction with Cu2+, while the fluorescence of R-CDs is restored as the acidic MR converts to its basic form, removing the inner filter effect. The ratiometric signal (F608/F750) of the R-CDs/MR and NIR-CDs/Cu2+ intensities changed in response to the pH induced by urea hydrolysis, enabling selective and sensitive urea detection. Detailed spectroscopic and morphological investigations confirmed the fluorescence probe design and elucidated the sensing mechanism. The method exhibited excellent sensitivity (0.00028 mM LOD) and linearity range (0.001 - 8.0 mM) for urea detection, with successful application in milk samples for monitoring adulteration, demonstrating negligible interference and high recovery levels (96.5% to 101.0%). This ratiometric fluorescence approach offers a robust strategy for selective urea sensing in complicated matrices.
Subject(s)
Carbon , Copper , Fluorescent Dyes , Limit of Detection , Quantum Dots , Spectrometry, Fluorescence , Urea , Urease , Urea/analysis , Urea/chemistry , Urease/chemistry , Copper/chemistry , Carbon/chemistry , Hydrogen-Ion Concentration , Quantum Dots/chemistry , Fluorescent Dyes/chemistry , Spectrometry, Fluorescence/methods , Animals , Milk/chemistry , Azo Compounds/chemistry , Food Contamination/analysisABSTRACT
More recently, the application of semiconductor nanomaterials called quantum dots (QDs), has gained considerable attention as they possess tunable optoelectronic and physicochemical properties. There are several routes of QDs synthesis some of which include lithography, molecular beam epitaxy, and chemical reduction. However, most of these methods are expensive, labour intensive, and produce toxic by-products. Hence, the biosynthesis of QDs has been extensively researched for addressing the issues. This review elaborates on the biogenic synthesis of cadmium selenide, cadmium telluride, cadmium sulfide, lead sulfide, and zinc sulfide QDs using bacteria, and fungi. Further, we attempt to identify the underlying mechanism and critical parameters that can control the synthesis of QDs. Eventually, their application in detectors, photovoltaics, biodiesel, photocatalysis, infection-control, and bioimaging are discussed. Thus, biogenic QDs have a tremendous scope in future to emerge as next generation nanotheranostics although thorough pharmacokinetic, and pharmacodynamic studies are required.
Subject(s)
Bacteria , Cadmium Compounds , Fungi , Quantum Dots , Sulfides , Zinc Compounds , Quantum Dots/chemistry , Bacteria/drug effects , Bacteria/metabolism , Sulfides/chemistry , Sulfides/metabolism , Fungi/metabolism , Fungi/drug effects , Cadmium Compounds/chemistry , Zinc Compounds/chemistry , Selenium Compounds/chemistry , Lead/chemistry , TelluriumABSTRACT
Graphene Quantum Dots (GQDs) have shown the potential for antimicrobial photodynamic treatment, due to their particular physicochemical properties. Here, we investigated the activity of three differently functionalized GQDs-Blue Luminescent GQDs (L-GQDs), Aminated GQDs (NH2-GQDs), and Carboxylated GQDs (COOH-GQDs)-against E. coli. GQDs were administrated to bacterial suspensions that were treated with blue light. Antibacterial activity was evaluated by measuring colony forming units (CFUs) and metabolic activities, as well as reactive oxygen species stimulation (ROS). GQD cytotoxicity was then assessed on human colorectal adenocarcinoma cells (Caco-2), before setting in an in vitro infection model. Each GQD exhibits antibacterial activity inducing ROS and impairing bacterial metabolism without significantly affecting cell morphology. GQD activity was dependent on time of exposure to blue light. Finally, GQDs were able to reduce E. coli burden in infected Caco-2 cells, acting not only in the extracellular milieu but perturbating the eukaryotic cell membrane, enhancing antibiotic internalization. Our findings demonstrate that GQDs combined with blue light stimulation, due to photodynamic properties, have a promising antibacterial activity against E. coli. Nevertheless, we explored their action mechanism and toxicity on epithelial cells, fixing and standardizing these infection models.
Subject(s)
Anti-Bacterial Agents , Blue Light , Escherichia coli , Graphite , Quantum Dots , Reactive Oxygen Species , Humans , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Caco-2 Cells , Escherichia coli/drug effects , Graphite/chemistry , Graphite/pharmacology , Photochemotherapy/methods , Quantum Dots/chemistry , Reactive Oxygen Species/metabolismABSTRACT
Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.
Subject(s)
Biosensing Techniques , Electrochemical Techniques , Infrared Rays , Biosensing Techniques/methods , Electrochemical Techniques/methods , Electrochemical Techniques/instrumentation , Humans , Nanostructures/chemistry , Quantum Dots/chemistry , Quantum Dots/radiation effects , Animals , Photochemical Processes , Biomarkers/analysisABSTRACT
Heteroatom doping has become an important method to enhance the performance of traditional carbon dots in modern times. Selenium (Se) is a nonmetallic trace element with excellent redox properties and is therefore essential for health. Previous studies have mainly used pure chemicals as selenium sources to prepare selenium-doped carbon dots (Se-CDs), but the precursor pure chemicals have the disadvantages of being expensive, difficult to obtain, toxic, and having low fluorescence yields of the synthesised Se-CDs. Fortunately, our team achieved successful synthesis of selenium carbon dots, exhibiting excellent luminescence and biocompatibility through a one-step hydrothermal method using selenium-enriched natural plant Cardamine, as an alternative to selenium chemicals. This approach aims to address the limitations and high costs associated with Se-CDs precursors. Electron spin resonance spectroscopy (ESR) and cellular antioxidant tests have confirmed the protective ability of Se-CDs against oxidative damage induced by excessive reactive oxygen species (ROS). A new concept and method for synthesizing selenium carbon dots on the basis of biomass, a rationale for the antioxidant effects on human health, and a wide range of development and application possibilities were offered in this work.
Subject(s)
Antioxidants , Carbon , Luminescence , Quantum Dots , Selenium , Selenium/chemistry , Carbon/chemistry , Quantum Dots/chemistry , Antioxidants/chemistry , Antioxidants/pharmacology , Humans , Reactive Oxygen Species/metabolism , Plants/chemistry , Plants/metabolismABSTRACT
A nanohybrid-modified glassy carbon electrode based on conducting polypyrrole doped with carbon quantum dots (QDs) was developed and used for the electrochemical detection of anti-tissue transglutaminase (anti-tTG) antibodies. To improve the polypyrrole conductivity, carrier mobility, and carrier concentration, four types of carbon nanoparticles were tested. Furthermore, a polypyrrole-modified electrode doped with QDs was functionalized with a PAMAM dendrimer and transglutaminase 2 protein by cross-linking with N-hydroxysuccinimide (NHS)/N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC). The steps of electrode surface modification were surveyed via electrochemical measurements (differential pulse voltammetry (DPV), impedance spectroscopy, and X-ray photoelectron spectroscopy (XPS)). The surface characteristics were observed by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and contact angle measurements. The obtained modified electrode exhibited good stability and repeatability. DPV between - 0.1 and 0.6 V (vs. Ag/AgCl 3 M KCl reference electrode) was used to evaluate the electrochemical alterations that occur after the antibody interacts with the antigen (transglutaminase 2 protein), for which the limit of detection was 0.79 U/mL. Without the use of a secondary label, (anti-tTG) antibodies may be detected at low concentrations because of these modified electrode features.
Subject(s)
Dendrimers , Electrochemical Techniques , Electrodes , Limit of Detection , Polymers , Protein Glutamine gamma Glutamyltransferase 2 , Pyrroles , Quantum Dots , Transglutaminases , Quantum Dots/chemistry , Pyrroles/chemistry , Transglutaminases/immunology , Transglutaminases/chemistry , Polymers/chemistry , Electrochemical Techniques/methods , Humans , Dendrimers/chemistry , Biosensing Techniques/methods , GTP-Binding Proteins/immunology , Antibodies/immunology , Antibodies/chemistry , Carbon/chemistryABSTRACT
A smartphone-assisted portable dual-mode immunoassay was constructed based on curcumin nanoparticles (CNPs) and carbon dots (CDs) for gentamicin (GEN) detection. CNPs were labeled with goat anti-mouse IgG (Ab2) to create a conjugation that coupled dual signals to concentrations of GEN antigens. CNPs were introduced to pH 7.4 water and showed insignificant color and optical responses. When exposed to the high pH environment, the structure of CNPs changed and color and optical properties were restored. Because of the inner filter effect (IFE) between CNPs and CDs, the fluorescence of CNPs at 550 nm quenched the fluorescence of CDs at 450 nm. Colorimetry and ratiometric fluorescence (F550 nm/F450 nm) dual-mode immunoassay linearly correlated with GEN ranged from 10-4 to 100 µg/mL with a detection limit (LOD) of 8.98 × 10-5 µg/mL and 4.66 × 10-5 µg/mL, respectively. This work supplied a portable, sensitive, and specific platform to detect GEN.
Subject(s)
Carbon , Curcumin , Gentamicins , Limit of Detection , Nanoparticles , Quantum Dots , Smartphone , Curcumin/chemistry , Immunoassay/methods , Carbon/chemistry , Gentamicins/analysis , Gentamicins/immunology , Gentamicins/chemistry , Quantum Dots/chemistry , Nanoparticles/chemistry , Animals , MiceABSTRACT
In this paper, nitrogen-doped carbon quantum dots (N-CQDs) are synthesized by the hydrothermal method. N-CQDs exhibit strong fluorescence, and N-CQDs are well dispersed in water as well as in various organic solvents. N-CQDs emit multi-color fluorescence from blue to red, with wavelengths in the range of 450-650 nm without the need for purification. Furthermore, the fluorescence emission of N-CQDs was selectively quenched after adding Fe3+ ions. N-CQDs were used as a nanoprobe for the detection of Fe3+ ions, showing a good linear correlation between the fluorescence emission and the concentration of Fe3+ in the Fe3+ concentration range from 0 to 100 µM. The limit of detection (LOD) was 55.7 µM for Fe3+ in water and 40.2 µM in fetal bovine serum (FBS) samples. The study shows that the synthesized N-CQDs have low cost and great potential for application in biological analysis.
Subject(s)
Carbon , Iron , Nitrogen , Quantum Dots , Quantum Dots/chemistry , Carbon/chemistry , Nitrogen/chemistry , Iron/analysis , Iron/chemistry , Animals , Cattle , Spectrometry, Fluorescence , Ions/analysis , Limit of Detection , Fluorescence , ColorABSTRACT
Antibiotic residues persist in the environment and represent serious health hazards; thus, it is important to develop sensitive and effective detection techniques. This paper presents a bio-inspired way to make water-soluble fluorescent polymer carbon dots (PCDs@PVA) by heating biomass precursors and polyvinyl alcohol (PVA) together. For example, the synthesized PCDs@PVA are very stable with enhanced emission intensity. This property was observed in a wide range of environmental conditions, including those with changing temperatures, pH levels, UV light, and ionic strength. PCDs@PVA detected the antibiotic chlortetracycline (CTCs) with great selectivity against structurally related compounds and a low detection limit of 20 nM, demonstrating outstanding sensitivity and specificity. We confirmed the sensor's practical application through real sample analysis, yielding recovery rates of 98%-99% in samples of milk, honey, and river water. The synthesized PCDs@PVA fluorescence sensor was successfully used for CTCs detection in real samples.
Subject(s)
Carbon , Chlortetracycline , Fluorescent Dyes , Polyvinyl Alcohol , Quantum Dots , Chlortetracycline/analysis , Polyvinyl Alcohol/chemistry , Carbon/chemistry , Fluorescent Dyes/chemistry , Fluorescent Dyes/chemical synthesis , Quantum Dots/chemistry , Animals , Milk/chemistry , Anti-Bacterial Agents/analysis , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , Limit of Detection , Honey/analysis , Polymers/chemistry , Polymers/chemical synthesis , Water Pollutants, Chemical/analysis , Rivers/chemistry , Spectrometry, Fluorescence , Hydrogen-Ion ConcentrationABSTRACT
Herein, luminous blue carbon quantum dots (CDs) employing Anisomeles indica (Catmint) were reported with imaging, self-targeting, and therapeutic effects on triple-negative breast cancer (TNBC, MDA-MB-231) cells. The salient features of CDs generated from catmint are as follows: i) optical studies confirm CDs with excitation-dependent emission; ii) high-throughput characterization authenticates the formation of CDs with near-spherical shape with diameter ranging between 5 and 15 nm; iii) CDs induce cytotoxicity (3.22 ± 0.64 µg/ml) in triple-negative breast cancer (TNBC, MDA-MB-231) cells; iv) fluorescence microscopy demonstrates that CDs promote apoptosis by increasing reactive oxygen species (ROS) and decreasing mitochondrial membrane potential; v) CDs significantly up-regulate pro-apoptotic gene expression levels such as caspases-8/9/3. Finally, our work demonstrates that catmint-derived CDs are prospective nanotheranostics that augment cancer targeting and imaging.
Subject(s)
Apoptosis , Carbon , Quantum Dots , Signal Transduction , Triple Negative Breast Neoplasms , Quantum Dots/chemistry , Humans , Apoptosis/drug effects , Triple Negative Breast Neoplasms/metabolism , Triple Negative Breast Neoplasms/pathology , Triple Negative Breast Neoplasms/drug therapy , Carbon/chemistry , Carbon/pharmacology , Signal Transduction/drug effects , Reactive Oxygen Species/metabolism , Cell Line, Tumor , Cell Survival/drug effects , Lamiaceae/chemistry , Membrane Potential, Mitochondrial/drug effects , Drug Screening Assays, Antitumor , Antineoplastic Agents/pharmacology , Antineoplastic Agents/chemistryABSTRACT
MXenes are two-dimensional (2D) transition metal-based carbides, nitrides, and carbonitrides that are synthesized from its precursor MAX phase. The selective etching of the "A" from the MAX phase yields multi-functional MXenes that hold promise in a wide range of energy-based applications and biomedical applications. Based on its intended application, MXenes are prepared as multilayered sheets, monolayer flakes, and quantum dots. Conventionally, MXenes are prepared using hydrofluoric (HF) acid etching; however, the use of HF impedes its effective use in biomedical applications. This calls for the use of nontoxic HF-free synthesis protocols to prepare MXenes safe for biological use. Therefore, we have discussed a facile process to synthesize biocompatible, HF-free MXene nanosheets and quantum dots.