Tremendously enhanced catalytic performance of Fe(III)/peroxymonosulfate process by trace Cu(II): A high-valent metals domination in organics removal.

Dissolved copper and iron ions are regarded as friendly and economic catalysts for peroxymonosulfate (PMS) activation, however, neither Cu(II) nor Fe(III) shows efficient catalytic performance because of the slow rates of Cu(II)/Cu(I) and Fe(III)/Fe(II) cycles. Innovatively, we observed a significant enhancement on the degradation of organic contaminants when Cu(II) and Fe(III) were coupled to activate PMS in borate (BA) buffer. The degradation efficiency of Rhodamine B (RhB, 20 µmol/L) reached up to 96.3% within 10 min, which was higher than the sum of individual Cu(II)- and Fe(III)- activated PMS process. Sulfate radical, hydroxyl radical and high-valent metal ions (i.e., Cu(III) and Fe(IV)) were identified as the working reactive species for RhB removal in Cu(II)/Fe(III)/PMS/BA system, while the last played a predominated role. The presence of BA dramatically facilitated the reduction of Cu(II) to Cu(I) via chelating with Cu(II) followed by Fe(III) reduction by Cu(I), resulting in enhanced PMS activation by Cu(I) and Fe(II) as well as accelerated generation of reactive species. Additionally, the strong buffering capacity of BA to stabilize the solution pH was satisfying for the pollutants degradation since a slightly alkaline environment favored the PMS activation by coupling Cu(II) and Fe(III). In a word, this work provides a brand-new insight into the outstanding PMS activation by homogeneous bimetals and an expanded application of iron-based advanced oxidation processes in alkaline conditions.

Development of a hybrid rhodamine-hydrazine NIR fluorescent probe for sensitive detection and imaging of peroxynitrite in necrotizing enterocolitis model.

This study describes the synthesis and characterization of a novel near-infrared (NIR) fluorescent probe RBNE based on a hybrid rhodamine dye, which shows excellent optical capability for detecting and imaging ONOO- in necrotizing enterocolitis (NEC) mouse model. The probe RBNE undergoes hydrazine redox-process, and subsequently the spirocyclic structure's opening, resulting in a turn-on fluorescence emission with the presence of ONOO-, which exhibits several excellent features, including a significant Stokes shift of 108 nm, near-infrared emission at 668 nm, a lower detection limit of 56 nM, low cytotoxicity, and excellent imaging ability for ONOO- both in vitro and in vivo. The presented study introduces a novel optical tool that has the potential to significantly advance our understanding of peroxynitrite (ONOO-) behaviors in necrotizing enterocolitis (NEC).

Facile roll-to-roll production of nanoporous fiber coatings for advanced wound care sutures.

Theranostic sutures are derived from innovative ideas to enhance wound healing results by adding wound diagnostics and therapeutics to typical sutures by functionalizing them with additional materials. Here, we present a new direct electrospinning method for the fast, continuous, inexpensive, and high-throughput production of versatile nanofibrous-coated suture threads, with precise control over various essential microstructural and physical characteristics. The thickness of the coating layer and the alignment of nanofibers with the thread's direction can be adjusted by the user by varying the spooling speed and the displacement between the spinneret needle and thread. To show the flexibility of our method for a range of different materials selected, gelatin, polycaprolactone, silk fibroin, and PEDOT:PSS (poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate)) were the resultant nanofibers characterized by scanning electron microscopy (SEM) imaging and conductivity tests. In a series of in vitro and ex vivo tests (pig skin), sutures were successfully tested for their flexibility and mechanical properties when used as weaving and knotting sutures, and their biocompatibility with a keratinocyte cell line. For temperature-based drug-releasing tests, two fluorescent molecules as drug models with high and low molecular weight, namely fluorescein isothiocyanate-dextran (20 kDa) and rhodamine B (470 Da), were used, and their steady release with incremental increase of temperature to 37 °C over 120 min was seen, which is appropriate for bacterial treatment drugs. Given the advantages of the presented technique, it seems to have promising potential to be used in future medical applications for wound closure and bacterial infection treatment via a temperature-triggered drug release strategy.

Comparison of surface adsorption efficacies of eco-sustainable agro/animal biomass-derived activated carbon for the removal of rhodamine B and hexavalent chromium.

Effective management and remediation strategies are crucial to minimize the impacts of both organic and inorganic contaminants on environmental quality and human health. This study investigates a novel approach utilizing cotton shell activated carbon (CSAC), rice husk activated carbon (RHAC), and wasp hive activated carbon (WHAC), produced through alkali treatment and carbonization under N2 atmosphere at 600 °C. The adsorption capacities of biomass-derived mesoporous activated carbons (CSAC, RHAC, WHAC) alongside macroporous commercial activated carbons (CAC) were evaluated for removing rhodamine B (Rh B) and hexavalent chromium (Cr6+). The CSAC exhibits remarkable adsorption efficiency (255.4 mg.g-1) for Cr(VI) removal, while RHAC demonstrates superior efficacy (174.2 mg.g-1) for Rh B adsorption. Investigating various optimal parameters including initial pH (pH 3 for Cr and pH 7 for Rh B), catalyst dosage (200 mg.L-1), and initial concentration (20 mg.L-1), the Redlich-Peterson isotherm model is applied to reveal a hybrid adsorption mechanism encompassing monolayer (chemisorption) and multilayer (van der Waals adsorption) processes. Kinetic analysis highlights the pseudo-second-order and Elovich models as the most suitable, suggesting physiochemisorption mechanisms. Thermodynamic analysis indicates the endothermic nature of the adsorption process, with increased randomness at the solid-solution interface. Isosteric heat investigations using Clausius-Clapeyron, Arrhenius, and Eyring equations reveal a heterogeneous surface nature across all activated carbons. Further confirmation of Rh B and Cr(VI) adsorption onto activated carbons is provided through FTIR, FESEM, and EDAX analysis. This study highlights the innovation and promise of utilizing biomass-derived activated carbons for effective pollutant removal.

Tailoring structural and optical properties of Cu(II)-induced MgAl2O4 nanoparticles and their response to toxic dyes under solar illumination.

Worldwide environmental challenges pose critical problems with the growth of the global economy. Addressing these issues requires the development of an eco-friendly and sustainable catalyst for degrading organic dye pollutants. In this study, copper-doped magnesium aluminates (CuxMg1-xAl2O4) with x = 0.0-0.8 were synthesized using a citrate-based combustion route. The inclusion of Cu(II) significantly impacted the structural, microstructural, optical, and photocatalytic activity of the catalyst. Rietveld analysis of X-ray diffraction powder profiles revealed single-phase spinels crystallized in the face-centered cubic unit cell with Fd 3 ¯ m space group. Chemical states of the ions, surface morphology, and elemental investigation were analyzed by X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy, respectively. UV-visible and diffuse reflectance spectroscopies confirmed the reduction of the band gap due to Cu(II) doping, validated by first-principle investigations using the WIEN2k code. The catalyst with x = 0.8 showed higher photocatalytic efficacy (90% and 93%) for removing two azo organic dye pollutants, rhodamine B and methyl orange, respectively, within 120 min. Degradation kinetics followed a pseudo-first-order mechanism. The doped (0.8) sample was structurally and morphologically stable and reusable under visible irradiation, retaining performance after three runs. Scavenger studies confirmed hydroxyl and superoxide radicals' involvement in the degradation. This work presents an effective approach to enhancing CuxMg1-xAl2O4 catalysts' photodegradation performance, with potential applications in pharmaceuticals and wastewater remediation.

Tailoring the pKa of Fluorescence Lifetime Imaging Probes to Visualize Aggrephagy and Resolve Its Microenvironmental Viscosity.

Aggrephagy describes lysosomal transport and degradation of protein aggregates via cellular macroautophagy, a key mechanism to prevent neurodegenerative diseases. Here, we develop a dual-probe method to visualize the aggrephagy process and resolve its viscosity heterogeneity using fluorescence lifetime imaging (FLIM). The dual-probe system consists of (1) a near-infrared lysosomal targeting FLIM probe (Lyso-P1) that is derived from a rhodamine scaffold with a tailored pKa value to accommodate an acidic lysosomal environment and (2) a green BODIPY-based FLIM probe (Agg-P2) that reports on degradation of cellular aggregates via HaloTag. Both probes exhibit acid-resistant, viscosity-dependent fluorescence intensity and lifetime (τ) responses, which are ready for intensity- and FLIM-based imaging. Photochemical, theoretical, and biochemical characterizations reveal the probes' mechanism-of-actions. In cells, we exploit Lyso-P1 and Agg-P2 to simultaneously quantify both lysosomal and protein aggegates' viscosity changes upon the aggrephagy process via FLIM. We reveal orthogonal changes in microenvironmental viscosities and morphological heterogeneity upon various cellular stresses. Overall, we provide an imaging toolset to quantitatively study aggrephay, which may benefit screening of aggrephay modulators for disease intervention.

Activatable Heavy-Atom-Free Photosensitizer with Large Stokes Shift and a NIR-II Emission Harnessing Rhodamine Ring-Opening Strategy.

Activatable photosensitizers (PSs) generating 1O2 only under specific conditions can minimize concomitant injury to normal tissues. Heavy-atom-free PSs hold the merits of low dark toxicity, long triplet-state lifetimes, good photostability, and relatively low cost. PSs with emission in the second near-infrared (NIR-II) window are highly valuable for deep-tissue, high-contrast imaging. Herein, we have designed and synthesized a series of heavy-atom-free PSs by a one-step reaction between an easily accessible rhodamine derivative and commercially available thiophene aldehydes. One of the as-prepared PSs, 2b-3T, exhibits emission maxima at 810 nm and tails to the NIR-II region at 1140 nm, together with large Stokes shift (178 nm). Importantly, the newly developed PSs, featuring functional carboxylic acid groups, present promising opportunities as versatile platforms for creating activatable PSs. To validate our concept, we developed Cu2+/pH-activatable PSs using the spirocyclization mechanism of rhodamine. Ultimately, we showcased the effectiveness of these innovative PSs in photodynamic therapy through in vitro experiments.

Morphology-Dependent Photocatalytic Activity of Nanostructured Titanium Dioxide Coatings with Silver Nanoparticles.

This study aims to improve the photocatalytic properties of titanium dioxide nanorods (TNRs) and other related nanostructures (dense nanorods, needle-like nanorods, nanoballs, and nanoflowers) by modifying them with silver nanoparticles (AgNPs). This preparation is carried out using a two-step method: sol-gel dip-coating deposition combined with hydrothermal crystal growth. Further modification with AgNPs was achieved through the photoreduction of Ag+ ions under UV illumination. The investigation explores the impact of different growth factors on the morphological development of TiO2 nanostructures by modulating (i) the chemical composition, the water:acid ratio, (ii) the precursor concentration involved in the hydrothermal process, and (iii) the duration of the hydrothermal reaction. Morphological characteristics, including the length, diameter, and nanorod density of the nanostructures, were analyzed using scanning electron microscope (SEM). The chemical states were determined through use of the X-ray photoelectron spectroscopy (XPS) technique, while phase composition and crystalline structure analysis was performed using the Grazing Incidence X-ray Diffraction (GIXRD) method. The results indicate that various nanostructures (dense nanorods, needle-like nanorods, nanoballs, and nanoflowers) can be obtained by modifying these parameters. The photocatalytic efficiency of these nanostructures and Ag-coated nanostructures was assessed by measuring the degradation of the organic dye rhodamine B (RhB) under both ultraviolet (UV) irradiation and visible light. The results clearly show that UV light causes the RhB solution to lose its color, whereas under visible light RhB changes into rhodamine 110, indicating a successful photocatalytic transformation. The nanoball-like structures' modification with the active metal silver (TNRs 4 Ag) exhibited high photocatalytic efficiency under both ultraviolet (UV) and visible light for different chemical composition parameters. The nanorod structure (TNRs 2 Ag) is more efficient under UV, but under visible-light photocatalyst, the TNRs 6 Ag (dense nanorods) sample is more effective.

Removal of Rhodamine-B dye from Aqueous Solutions Using Alkaline-Modified Activated Carbon from Cocoa Pod Husk.

Rhodamine-B (RhB) dye in wastewater poses health and environmental risks due to respiratory and eye infections, neurotoxicity, and carcinogenicity, necessitating proper disposal for risk mitigation. This study investigates RhB removal from water using NaOH-modified activated carbon derived from cocoa pod husk (CPHAC). Employing a face-centered central composite design, operational variables were optimized to achieve maximum RhB dye removal efficiency. The study reveals a removal efficiency of 98.87 ± 0.84% under optimized conditions: adsorbent dose of 1.34 g, contact time of 71.59 min, and an initial RhB concentration of 6.61 ppm. The Freundlich isotherm model demonstrated a good fit, suggesting that RhB removal is governed by heterogeneity and multilayer adsorption. Kinetic experiments revealed that adsorption follows a pseudo-second-order model, indicating likely irreversible adsorption with dye molecules forming chemical bonds on CPHAC's surface. Overall, this study demonstrates the effectiveness of CPHAC as an efficient adsorbent for RhB removal from water.

Photocatalytic degradation of rhodamine B dye pollutants by Fe3O4/SiO2 core-shell magnetic nanocomposite functionalized with TiO2.

Significant efforts have been dedicated to creating recyclable and efficient methods for treating waste dyes, including rhodamine B (RhB). Nevertheless, challenges such as complex operational techniques, high costs, energy consumption, and inefficacy in dye removal persist. Here, the synthesis and application of TiO2/Fe3O4/SiO2 for photocatalytic degradation of RhB dye pollutants have been explored. This research was initiated with magnetite (Fe3O4) synthesis using the coprecipitation method, followed by silica (SiO2) extraction from rice husk waste using the sol-gel process, and a hydrothermal method for synthesizing titanium dioxide (TiO2) and TiO2/Fe3O4/SiO2 nanocomposite. The crystalline structure of TiO2/Fe3O4/SiO2 was obtained with Fe3O4 as the core, while TiO2 and SiO2 as the shell. The particle size analysis showed the nanosize of TiO2/Fe3O4/SiO2 (1.04 ± 0.46 nm). TiO2/Fe3O4/SiO2 nanocomposite boasts a high surface area of 48.025 m2/g, 2.2 times higher than unmodified TiO2. This nanocomposite also displayed paramagnetic properties with a saturation magnetization of 9.117 emu/g, facilitating easy separation in photocatalytic applications. The photocatalytic activity of TiO2/Fe3O4/SiO2 exhibited effectively degraded RhB, achieving a degradation rate of 53.58% and an excellent rate constant of 0.7303 min-1. The RhB photodegradation in this study requires a moderate irradiation time (60 min), uses only a tiny amount of photocatalyst (100 mg), and does not need additional chemicals. Moreover, this study has another advantage of utilizing rice husk as a silica source, offering an eco-friendly and sustainable approach.

Determination of Rhodamine 6G with direct immersion single-drop microextraction combined with an optical probe.

The combination of an optical probe and single-drop direct immersion microextraction (DI-SDME-OP) was used for the preconcentration and subsequent spectrophotometric determination of rhodamine 6G (Rh6G). The developed method is based on the formation of an ionic associate between Rh6G and picric acid at pH 3.0 and its extraction with amyl acetate. A microdrop of the organic phase was stably placed in the hole of an optical probe immersed in the sample solution. The absorbance of the extraction phase was monitored at 534 nm. The proposed method combines in a single step several stages of the analytical procedure, such as pre-concentration, phase separation, transfer of the extraction phase to the instrument and online measurement. The sensitivity of the proposed approach is not inferior to existing microextraction methods involving the combination of liquid-phase or solid-phase extraction with spectrophotometry or HPLC with a UV-Vis detector. The evaluation of the greenness of the developed method carried out by the AGREE method (0.58 points) showed that it outperforms other similar existing techniques using this parameter. The calibration plot for the determination of Rh6G by the DI-SDME-OP method was linear over the range of 10-500 nM with a correlation coefficient of 0.9956. The limit of detection was 3.4 nM. The accuracy and applicability of the method were evaluated by the determination of Rh6G in natural waters and lipstick.

Accurate and rapid mercury susceptibility detection in aquatic samples using fluorescent probe integrated rhodamine with pyridyl isothiocyanate.

Mercury, one of the various harmful metals, is particularly significant in affecting aquatic organisms, currently gaining more attentions and sparking discussions. In response to the limitations of traditional detections, fluorescent probes have emerged as a promising solution with some advantages, such as weaker background interference, shorter processing time, higher accuracy. Thus, a novel fluorescent probe, FS-Hg-1, has been developed for assessing mercury ion (Hg2+) concentrations in aquatic products. This probe displays specific recognition of mercury ions in fluorescence spectra. Notably, FS-Hg-1 exhibits a distinct color change to pink when combined with Hg2+ (with a 948-fold increase in absorption at 568 nm) and a substantial fluorescence change towards Hg2+ (361-fold increase, excitation at 562 nm, emission at 594 nm) in N, N-dimethylformamide. The probe boasts a detection limit of 0.14 µM and rapid reaction with Hg2+ within 10 s, showing an excellent linear correlation with [Hg2+] in the range of 0 to 10 µM. Through thorough analysis using FS-Hg-1, the results align with those from the standard method (P > 0.05), with spiked recovery rates ranging from 108.4% to 113.2%. With its precise recognition, low detection limit, and remarkable sensitivity, this fluorescent assay proves effective in mercury concentration determination in aquatic samples without interference. The potential of FS-Hg-1 is promising for speedy detection of residual Hg2+ and holds significance in ensuring food safety.

A lysosome-located and rhodamine-based fluorescence probe for recognizing hydrogen polysulfide.

Hydrogen polysulfide (H2Sn, n≥2), as a kind of active sulfur species (RSS), has become a hot topic in RSS. It can regulate the biological activity of many proteins through S-sulfhydrylation of cysteine residues (protein Cys-SSH), and has a protective effect on cells. Although there have been some studies on hydrogen polysulfide, its production, degradation pathway and regulation mechanism still need further be researched. In presented study, an original lysosome-localized fluorescent probe for determining H2Sn was developed utilizing rhodamine as the fluorogen. The probe used morpholine as the locating unit of lysosomes and chose 2-fluoro-5-nitrobenzoate as the recognizing group. Before adding H2Sn, the proposed probe displayed a spironolactone structure and emitted very weak fluorescence. After adding H2Sn, a conjugated xanthene was formed and the probe demonstrated green fluorescence. When the H2Sn concentration was varied from 6.0×10-7 mol·L-1 to 10.0×10-5 mol·L-1, the fluorescence intensity of the probe was linearly dependent on the H2Sn concentration. And the detection limit was 1.5×10-7 mol·L-1. The presented probe owned a fast response speed, good selectivity, excellent sensitivity and broad pH work scope. In addition, the probe had been well utilized to sense endogenic and exogenic H2Sn in lysosomes.

Fluorogenic Rhodamine-Based Chemigenetic Biosensor for Monitoring Cellular NADPH Dynamics.

Ratiometric biosensors employing Förster Resonance Energy Transfer (FRET) enable the real-time tracking of metabolite dynamics. Here, we introduce an approach for generating a FRET-based biosensor in which changes in apparent FRET efficiency rely on the analyte-controlled fluorogenicity of a rhodamine rather than the commonly used distance change between donor-acceptor fluorophores. Our fluorogenic, rhodamine-based, chemigenetic biosensor (FOCS) relies on a synthetic, protein-tethered FRET probe, in which the rhodamine acting as the FRET acceptor switches in an analyte-dependent manner from a dark to a fluorescent state. This allows ratiometric sensing of the analyte concentration. We use this approach to generate a chemigenetic biosensor for nicotinamide adenine dinucleotide phosphate (NADPH). FOCS-NADPH exhibits a rapid and reversible response toward NAPDH with a good dynamic range, selectivity, and pH insensitivity. FOCS-NADPH allows real-time monitoring of cytosolic NADPH fluctuations in live cells during oxidative stress or after drug exposure. We furthermore used FOCS-NADPH to investigate NADPH homeostasis regulation through the pentose phosphate pathway of glucose metabolism. FOCS-NADPH is a powerful tool for studying NADPH metabolism and serves as a blueprint for the development of future fluorescent biosensors.

A dual-labeling fluorescent probe to track lysosomal polarity and endoplasmic reticulum dynamics during ferroptosis.

A polarity-sensitive probe was developed to simultaneously label lysosomes and endoplasmic reticulum (ER) via its dansylamide and rhodamine fluorescence, respectively, enabling ratiometric polarity detection and stable dual-labeling. The fragmented ER network and increased lysosomal polarity during ferroptosis were revealed, which facilitates the understanding of ferroptotic mechanisms.

Development of a high-performance liquid chromatography using rhodamine B hydrazide as the derivatization reagent for determination of ß propiolactone residues in inactivated COVID-19 vaccines.

ß-propiolactone (BPL) is an alkylating agent used for inactivation of biological samples such as vaccines. Due to its known carcinogenic properties, complete hydrolysis of BPL is essential, and the detection of trace amounts is crucial. In this study a novel High-Performance Liquid Chromatography-Ultraviolet (HPLC-UV) method was developed. Rhodamine B hydrazide (RBH) was synthesized and utilized as a derivatizing reagent to react with BPL. The reaction was optimized in a weak acidic solution, resulting in a high yield. The separation of the RBH-derivatized BPL was achieved on a C8 column and detected by a UV detector at a wavelength of 560 nm. The method's validation demonstrated a high linearity (r2 > 0.99) over a concentration range of 0.5-50 µg/mL, with detection and quantification limits of 0.17 µg/mL and 0.5 µg/mL, respectively. The average recovery of samples was 85.20 % with a relative standard deviation (RSD) of 1.75 %. This method was successfully applied for BPL residue analysis in inactivated COVID-19 vaccines. This novel derivatization method offers a promising solution for monitoring BPL residues in the vaccine production process for quality control purposes and compliance with regulatory standards.

Regulating band structure, charge transfer and separation, oxygen adsorption and activation by surface ion modification.

As a most promising environmental technology, the substantial enhancement of photocatalytic efficiency is still a big challenge for practical applications. In this work, the surface of Bi2O2CO3 (BOC) nanotubes are modified by Cl and I. The as-obtained samples at different hydrothermal temperatures (T) are designated as T-X-BOC (X = Cl, I). X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy and X-ray photoelectron spectroscopy (XPS) prove that Cl and I merely chemically adsorb on the BOC surface, rather than dope into the crystal lattice. The surface modification of Cl and I slightly increases light absorption range, while significantly promotes the photoelectron migration from bulk to the surface that greatly enhances the carrier separation efficiency. Density functional theory (DFT) calculations further prove that surface Cl and I have adjusted band structure and surface charge distribution. Besides, the surface Cl and I favor the O2 adsorption and trap the surface photoelectrons, thus promoting the formation of •O2-; while the surface Cl and I impede the surface adsorption of H2O, thus refraining the generation of •OH. In the degradation of rhodamine B (RhB), holes and •O2- radicals play the crucial role. Under ultraviolet light irradiation (λ < 420 nm) for 45 min, the RhB degradation ratios over 150-Cl-BOC (94%) and 150-I-BOC (85%) are 4.2 and 3.7 times higher than that of original BOC (18%), respectively. This work demonstrates that the simple surface halogenation modification greatly improves the photocatalytic activity.

Rapid eco-friendly selective dye removal using modified chitosan-based sponges: Synthesis, characterization, and application.

The ongoing challenge of water scarcity persists alongside a concerning rise in water pollution driven by population expansion and industrial development. As a result, urgent measures are imperative to address the pressing need for a clean and sustainable water supply. In this study, a sustainable and green approach was utilized to prepare four chitosan-based sponges from a chemically modified chitosan with different alkyl chains in aqueous medium and at room temperature. The resulting sponges displayed excellent stability in water with outstanding dye removal efficiency. The adsorption capacity was associated with the alkyl chain length incorporated to the polymer backbone. All sponges displayed a high adsorption capacity of methyl orange (MO) ranges between 238 and 380 mg g-1, while a low capacity were obtained for methylene blue (MB) and Rhodamine B (RB). Competitive adsorption experiments were conducted on binary and ternary mixtures to assess the selective removal of MO from a mixture of dyes in which the separation factor was found to be ranging between 1.6 and 32. The adsorption kinetics isotherms of all sponges followed the pseudo-second-order, and the Langmuir model was found to be more suitable than the Freundlich for the adsorption of MO on the sponges. The chitosan-based sponges showed stable performance, robustness and reusability over 5 adsorption-desorption cycles, indicating their great potential for water treatment applications.

A dual-modality sensing probe of fluorescent and colorimetric for detection of cobalt ion based on silver nanoparticles functionalized rhodamine 6G derivatives.

The combination of fluorescent probe and colorimetric technique has become one of the most powerful analytical methods due to the advantages of visualization, minimal measurement errors and high sensitivity. Hence, a novel dual-modality sensing probe with both colorimetric and fluorescent capabilities was developed for detecting cobalt ions (Co2+) based on homocysteine mediated silver nanoparticles and rhodamine 6G derivatives probe (AgNPs-Hcy-Rh6G2). The fluorescence of the AgNPs-Hcy-Rh6G2 probe turned on due to the opening of the Rh6G2 spirolactam ring in the presence of Co2+ by a catalytic hydrolysis. The fluorescent intensity of probe is proportional to Co2+ concentration in the range of 0.10-50 µM with a detection limit of 0.05 µM (S/N = 3). More fascinatingly, the color of AgNPs-Hcy-Rh6G2 probe changed from colorless to pink with increasing Co2+ concentration, which allowing colorimetric determination of Co2+. The absorbance of AgNPs-Hcy-Rh6G2 probe is proportional to Co2+ concentration in the range from 0.10 to 25 µM with a detection limit of 0.04 µM (S/N = 3). This colorimetric and fluorescent dual-modal method exhibited good selectivity, and reproducibility and stability, holding great potential for real samples analysis in environmental and drug field.

Fe(III)-Based Fluorescent Probe for High-Performance Recognition, Test Strip Analysis, and Cell Imaging of Carbon Monoxide.

Fluorescence sensing and imaging techniques are being widely studied for detecting carbon monoxide (CO) in living organisms due to their speed, sensitivity, and ease of use to biological systems. Most fluorescent probes used for this purpose are based on heavy metal ions like Pd, with a few using elements like Ru, Rh, Ir, Os, Tb, and Eu. However, these metals can be expensive and toxic to cells. There is a need for more affordable and biologically safe fluorescent probes for CO detection. Drawing inspiration from the robust affinity exhibited by heme iron toward CO, in this work, a rhodamine derivative called RBF was developed for imaging CO in living cells by binding to Fe(III) and could be used for CO sensing. A Fe(III)-based fluorescent probe for CO imaging in living cells offers advantages of cost effectiveness, low toxicity, and ease of use. The fluorescence detection using the RBF-Fe system showed a direct correlation with increasing levels of CORM-3 (LOD = 146 nM) or the exposure time of CO gas, displaying reduced fluorescence. A CO test paper based on RBF-Fe was created for simple on-site CO detection, where fluorescence would diminish in response to CO exposure, allowing rapid (2 min) visual identification. Imaging of CO in living cells was successfully conducted using the probe system, showing a decrease in fluorescence intensity as CORM-3 concentrations increased, indicating its effectiveness in monitoring CO levels accurately within living cells.