Impact of signal-to-noise ratio and contrast definition on the sensitivity assessment and benchmarking of fluorescence molecular imaging systems.

Significance: Standardization of fluorescence molecular imaging (FMI) is critical for ensuring quality control in guiding surgical procedures. To accurately evaluate system performance, two metrics, the signal-to-noise ratio (SNR) and contrast, are widely employed. However, there is currently no consensus on how these metrics can be computed. Aim: We aim to examine the impact of SNR and contrast definitions on the performance assessment of FMI systems. Approach: We quantified the SNR and contrast of six near-infrared FMI systems by imaging a multi-parametric phantom. Based on approaches commonly used in the literature, we quantified seven SNRs and four contrast values considering different background regions and/or formulas. Then, we calculated benchmarking (BM) scores and respective rank values for each system. Results: We show that the performance assessment of an FMI system changes depending on the background locations and the applied quantification method. For a single system, the different metrics can vary up to ∼ 35 dB (SNR), ∼ 8.65 a . u . (contrast), and ∼ 0.67 a . u . (BM score). Conclusions: The definition of precise guidelines for FMI performance assessment is imperative to ensure successful clinical translation of the technology. Such guidelines can also enable quality control for the already clinically approved indocyanine green-based fluorescence image-guided surgery.

Low-dose high-resolution chest CT in adults with cystic fibrosis: intraindividual comparison between photon-counting and energy-integrating detector CT.

BACKGROUND: Regular disease monitoring with low-dose high-resolution (LD-HR) computed tomography (CT) scans is necessary for the clinical management of people with cystic fibrosis (pwCF). The aim of this study was to compare the image quality and radiation dose of LD-HR protocols between photon-counting CT (PCCT) and energy-integrating detector system CT (EID-CT) in pwCF. METHODS: This retrospective study included 23 pwCF undergoing LD-HR chest CT with PCCT who had previously undergone LD-HR chest CT with EID-CT. An intraindividual comparison of radiation dose and image quality was conducted. The study measured the dose-length product, volumetric CT dose index, effective dose and signal-to-noise ratio (SNR). Three blinded radiologists assessed the overall image quality, image sharpness, and image noise using a 5-point Likert scale ranging from 1 (deficient) to 5 (very good) for image quality and image sharpness and from 1 (very high) to 5 (very low) for image noise. RESULTS: PCCT used approximately 42% less radiation dose than EID-CT (median effective dose 0.54 versus 0.93 mSv, p < 0.001). PCCT was consistently rated higher than EID-CT for overall image quality and image sharpness. Additionally, image noise was lower with PCCT compared to EID-CT. The average SNR of the lung parenchyma was lower with PCCT compared to EID-CT (p < 0.001). CONCLUSION: In pwCF, LD-HR chest CT protocols using PCCT scans provided significantly better image quality and reduced radiation exposure compared to EID-CT. RELEVANCE STATEMENT: In pwCF, regular follow-up could be performed through photon-counting CT instead of EID-CT, with substantial advantages in terms of both lower radiation exposure and increased image quality. KEY POINTS: Photon-counting CT (PCCT) and energy-integrating detector system CT (EID-CT) were compared in 23 people with cystic fibrosis (pwCF). Image quality was rated higher for PCCT than for EID-CT. PCCT used approximately 42% less radiation dose and offered superior image quality than EID-CT.

Integrating spatial and temporal features for enhanced artifact removal in multi-channel EEG recordings.

Objective.Various artifacts in electroencephalography (EEG) are a big hurdle to prevent brain-computer interfaces from real-life usage. Recently, deep learning-based EEG denoising methods have shown excellent performance. However, existing deep network designs inadequately leverage inter-channel relationships in processing multi-channel EEG signals. Typically, most methods process multi-channel signals in a channel-by-channel way. Considering the correlations among EEG channels during the same brain activity, this paper proposes utilizing channel relationships to enhance denoising performance.Approach.We explicitly model the inter-channel relationships using the self-attention mechanism, hypothesizing that these correlations can support and improve the denoising process. Specifically, we introduce a novel denoising network, named spatial-temporal fusion network (STFNet), which integrates stacked multi-dimension feature extractor to explicitly capture both temporal dependencies and spatial relationships.Main results.The proposed network exhibits superior denoising performance, with a 24.27% reduction in relative root mean squared error compared to other methods on a public benchmark. STFNet proves effective in cross-dataset denoising and downstream classification tasks, improving accuracy by 1.40%, while also offering fast processing on CPU.Significance.The experimental results demonstrate the importance of integrating spatial and temporal characteristics. The computational efficiency of STFNet makes it suitable for real-time applications and a potential tool for deployment in realistic environments.

STORM image denoising and information extraction.

Stochastic optical reconstruction microscopy (STORM) is extensively utilized in the fields of cell and molecular biology as a super-resolution imaging technique for visualizing cells and molecules. Nonetheless, the imaging process of STORM is frequently susceptible to noise, which can significantly impact the subsequent image analysis. Moreover, there is currently a lack of a comprehensive automated processing approach for analyzing protein aggregation states from a large number of STORM images. This paper initially applies our previously proposed denoising algorithm, UNet-Att, in STORM image denoising. This algorithm was constructed based on attention mechanism and multi-scale features, showcasing a remarkably efficient performance in denoising. Subsequently, we propose a collection of automated image processing algorithms for the ultimate feature extractions and data analyses of the STORM images. The information extraction workflow effectively integrates automated methods of image denoising, objective image segmentation and binarization, and object information extraction, and a novel image information clustering algorithm specifically developed for the morphological analysis of the objects in the STORM images. This automated workflow significantly improves the efficiency of the effective data analysis for large-scale original STORM images.

Assessment of material identification and quantification in the presence of metals using spectral photon counting CT.

Spectral Photon Counting Computed Tomography (SPCCT), a ground-breaking development in CT technology, has immense potential to address the persistent problem of metal artefacts in CT images. This study aims to evaluate the potential of Mars photon-counting CT technology in reducing metal artefacts. It focuses on identifying and quantifying clinically significant materials in the presence of metal objects. A multi-material phantom was used, containing inserts of varying concentrations of hydroxyapatite (a mineral present in teeth, bones, and calcified plaque), iodine (used as a contrast agent), CT water (to mimic soft tissue), and adipose (as a fat substitute). Three sets of scans were acquired: with aluminium, with stainless steel, and without a metal insert as a reference dataset. Data acquisition was performed using a Mars SPCCT scanner (Microlab 5×120); operated at 118 kVp and 80 µA. The images were subsequently reconstructed into five energy bins: 7-40, 40-50, 50-60, 60-79, and 79-118 keV. Evaluation metrics including signal-to-noise ratio (SNR), linearity of attenuation profiles, root mean square error (RMSE), and area under the curve (AUC) were employed to assess the energy and material-density images with and without metal inserts. Results show decreased metal artefacts and a better signal-to-noise ratio (up to 25%) with increased energy bins as compared to reference data. The attenuation profile also demonstrated high linearity (R2 >0.95) and lower RMSE across all material concentrations, even in the presence of aluminium and steel. Material identification accuracy for iodine and hydroxyapatite (with and without metal inserts) remained consistent, minimally impacting AUC values. For demonstration purposes, the biological sample was also scanned with the stainless steel volar implant and cortical bone screw, and the images were objectively assessed to indicate the potential effectiveness of SPCCT in replicating real-world clinical scenarios.

Synthetic CT generation from CBCT based on structural constraint cycle-EEM-GAN.

Objective. Cone beam CT (CBCT) typically has severe image artifacts and inaccurate HU values, which limits its application in radiation medicines. Scholars have proposed the use of cycle consistent generative adversarial network (Cycle-GAN) to address these issues. However, the generation quality of Cycle-GAN needs to be improved. This issue is exacerbated by the inherent size discrepancies between pelvic CT scans from different patients, as well as varying slice positions within the same patient, which introduce a scaling problem during training.Approach. We introduced the Enhanced Edge and Mask (EEM) approach in our structural constraint Cycle-EEM-GAN. This approach is designed to not only solve the scaling problem but also significantly improve the generation quality of the synthetic CT images. Then data from sixty pelvic patients were used to investigate the generation of synthetic CT (sCT) from CBCT.Main results.The mean absolute error (MAE), the root mean square error (RMSE), the peak signal to noise ratio (PSNR), the structural similarity index (SSIM), and spatial nonuniformity (SNU) are used to assess the quality of the sCT generated from CBCT. Compared with CBCT images, the MAE improved from 53.09 to 37.74, RMSE from 185.22 to 146.63, SNU from 0.38 to 0.35, PSNR from 24.68 to 32.33, SSIM from 0.624 to 0.981. Also, the Cycle-EEM-GAN outperformed Cycle-GAN in terms of visual evaluation and loss.Significance.Cycle-EEM-GAN has improved the quality of CBCT images, making the structural details clear while prevents image scaling during the generation process, so that further promotes the application of CBCT in radiotherapy.

Efficacy of compressed sensing and deep learning reconstruction for adult female pelvic MRI at 1.5 T.

BACKGROUND: We aimed to determine the capabilities of compressed sensing (CS) and deep learning reconstruction (DLR) with those of conventional parallel imaging (PI) for improving image quality while reducing examination time on female pelvic 1.5-T magnetic resonance imaging (MRI). METHODS: Fifty-two consecutive female patients with various pelvic diseases underwent MRI with T1- and T2-weighted sequences using CS and PI. All CS data was reconstructed with and without DLR. Signal-to-noise ratio (SNR) of muscle and contrast-to-noise ratio (CNR) between fat tissue and iliac muscle on T1-weighted images (T1WI) and between myometrium and straight muscle on T2-weighted images (T2WI) were determined through region-of-interest measurements. Overall image quality (OIQ) and diagnostic confidence level (DCL) were evaluated on 5-point scales. SNRs and CNRs were compared using Tukey's test, and qualitative indexes using the Wilcoxon signed-rank test. RESULTS: SNRs of T1WI and T2WI obtained using CS with DLR were higher than those using CS without DLR or conventional PI (p < 0.010). CNRs of T1WI and T2WI obtained using CS with DLR were higher than those using CS without DLR or conventional PI (p < 0.003). OIQ of T1WI and T2WI obtained using CS with DLR were higher than that using CS without DLR or conventional PI (p < 0.001). DCL of T2WI obtained using CS with DLR was higher than that using conventional PI or CS without DLR (p < 0.001). CONCLUSION: CS with DLR provided better image quality and shorter examination time than those obtainable with PI for female pelvic 1.5-T MRI. RELEVANCE STATEMENT: CS with DLR can be considered effective for attaining better image quality and shorter examination time for female pelvic MRI at 1.5 T compared with those obtainable with PI. KEY POINTS: Patients underwent MRI with T1- and T2-weighted sequences using CS and PI. All CS data was reconstructed with and without DLR. CS with DLR allowed for examination times significantly shorter than those of PI and provided significantly higher signal- and CNRs, as well as OIQ.

Feature selection by replicate reproducibility and non-redundancy.

MOTIVATION: A fundamental step in many analyses of high-dimensional data is dimension reduction. Two basic approaches are introduction of new synthetic coordinates and selection of extant features. Advantages of the latter include interpretability, simplicity, transferability, and modularity. A common criterion for unsupervized feature selection is variance or dynamic range. However, in practice, it can occur that high-variance features are noisy, that important features have low variance, or that variances are simply not comparable across features because they are measured in unrelated numeric scales or physical units. Moreover, users may want to include measures of signal-to-noise ratio and non-redundancy into feature selection. RESULTS: Here, we introduce the RNR algorithm, which selects features based on (i) the reproducibility of their signal across replicates and (ii) their non-redundancy, measured by linear dependence. It takes as input a typically large set of features measured on a collection of objects with two or more replicates per object. It returns an ordered list of features, i1,i2,…,ik, where feature i1 is the one with the highest reproducibility across replicates, i2 that with the highest reproducibility across replicates after projecting out the dimension spanned by i1, and so on. Applications to microscopy-based imaging of cells and proteomics highlight benefits of the approach. AVAILABILITY AND IMPLEMENTATION: The RNR method is available via Bioconductor (Huber W, Carey VJ, Gentleman R et al. (Orchestrating high-throughput genomic analysis with bioconductor. Nat Methods 2015;12:115-21.) in the R package FeatSeekR. Its source code is also available at https://github.com/tcapraz/FeatSeekR under the GPL-3 open source license.

Optimization of stimulus properties for SSVEP-based BMI system with a heads-up display to control in-vehicle features.

Over the years, the driver-vehicle interface has been improved, but interacting with in-vehicle features can still increase distraction and affect road safety. This study aims to introduce brain-machine interface (BMI)- based solution to potentially enhance road safety. To achieve this goal, we evaluated visual stimuli properties (SPs) for a steady state visually evoked potentials (SSVEP)-based BMI system. We used a heads-up display (HUD) as the primary screen to present icons for controlling in-vehicle functions such as music, temperature, settings, and navigation. We investigated the effect of various SPs on SSVEP detection performance including the duty cycle and signal-to-noise ratio of visual stimuli, the size, color, and frequency of the icons, and array configuration and location. The experiments were conducted with 10 volunteers and the signals were analyzed using the canonical correlation analysis (CCA), filter bank CCA (FBCCA), and power spectral density analysis (PSDA). Our experimental results suggest that stimuli with a green color, a duty cycle of 50%, presented at a central location, with a size of 36 cm2 elicit a significantly stronger SSVEP response and enhanced SSVEP detection time. We also observed that lower SNR stimuli significantly affect SSVEP detection performance. There was no statistically significant difference observed in SSVEP response between the use of an LCD monitor and a HUD.

Linear symmetric self-selecting 14-bit kinetic molecular memristors.

Artificial Intelligence (AI) is the domain of large resource-intensive data centres that limit access to a small community of developers1,2. Neuromorphic hardware promises greatly improved space and energy efficiency for AI but is presently only capable of low-accuracy operations, such as inferencing in neural networks3-5. Core computing tasks of signal processing, neural network training and natural language processing demand far higher computing resolution, beyond that of individual neuromorphic circuit elements6-8. Here we introduce an analog molecular memristor based on a Ru-complex of an azo-aromatic ligand with 14-bit resolution. Precise kinetic control over a transition between two thermodynamically stable molecular electronic states facilitates 16,520 distinct analog conductance levels, which can be linearly and symmetrically updated or written individually in one time step, substantially simplifying the weight update procedure over existing neuromorphic platforms3. The circuit elements are unidirectional, facilitating a selector-less 64 × 64 crossbar-based dot-product engine that enables vector-matrix multiplication, including Fourier transform, in a single time step. We achieved more than 73 dB signal-to-noise-ratio, four orders of magnitude improvement over the state-of-the-art methods9-11, while consuming 460× less energy than digital computers12,13. Accelerators leveraging these molecular crossbars could transform neuromorphic computing, extending it beyond niche applications and augmenting the core of digital electronics from the cloud to the edge12,13.

Calibrating dimension reduction hyperparameters in the presence of noise.

The goal of dimension reduction tools is to construct a low-dimensional representation of high-dimensional data. These tools are employed for a variety of reasons such as noise reduction, visualization, and to lower computational costs. However, there is a fundamental issue that is discussed in other modeling problems that is often overlooked in dimension reduction-overfitting. In the context of other modeling problems, techniques such as feature-selection, cross-validation, and regularization are employed to combat overfitting, but rarely are such precautions taken when applying dimension reduction. Prior applications of the two most popular non-linear dimension reduction methods, t-SNE and UMAP, fail to acknowledge data as a combination of signal and noise when assessing performance. These methods are typically calibrated to capture the entirety of the data, not just the signal. In this paper, we demonstrate the importance of acknowledging noise when calibrating hyperparameters and present a framework that enables users to do so. We use this framework to explore the role hyperparameter calibration plays in overfitting the data when applying t-SNE and UMAP. More specifically, we show previously recommended values for perplexity and n_neighbors are too small and overfit the noise. We also provide a workflow others may use to calibrate hyperparameters in the presence of noise.

Real-time identification of noise type contaminated in surface electromyogram signals using efficient statistical features.

Different types of noise contaminating the surface electromyogram (EMG) signal may degrade the recognition performance. For noise removal, the type of noise has to first be identified. In this paper, we propose a real-time efficient system for identifying a clean EMG signal and noisy EMG signals contaminated with any one of the following three types of noise: electrocardiogram interference, spike noise, and power line interference. Two statistical descriptors, kurtosis and skewness, are used as input features for the cascading quadratic discriminant analysis classifier. An efficient simplification of kurtosis and skewness calculations that can reduce computation time and memory storage is proposed. The experimental results from the real-time system based on an ATmega 2560 microcontroller demonstrate that the kurtosis and skewness values show root mean square errors between the traditional and proposed efficient techniques of 0.08 and 0.09, respectively. The identification accuracy with five-fold cross-validation resulting from the quadratic discriminant analysis classifier is 96.00%.

Exploring the impact and influence of melanin on frequency-domain near-infrared spectroscopy measurements.

Significance: Near-infrared spectroscopy (NIRS) is a non-invasive optical method that measures changes in hemoglobin concentration and oxygenation. The measured light intensity is susceptible to reduced signal quality due to the presence of melanin. Aim: We quantify the influence of melanin concentration on NIRS measurements taken with a frequency-domain near-infrared spectroscopy system using 690 and 830 nm. Approach: Using a forehead NIRS probe, we measured 35 healthy participants and investigated the correlation between melanin concentration indices, which were determined using a colorimeter, and several key metrics from the NIRS signal. These metrics include signal-to-noise ratio (SNR), two measurements of oxygen saturation (arterial oxygen saturation, SpO 2 , and tissue oxygen saturation, StO 2 ), and optical properties represented by the absorption coefficient ( µ a ) and the reduced scattering coefficient ( µ s ' ). Results: We found a significant negative correlation between the melanin index and the SNR estimated in oxy-hemoglobin signals ( r s = - 0.489 , p = 0.006 ) and SpO 2 levels ( r s = - 0.413 , p = 0.023 ). However, no significant changes were observed in the optical properties and StO 2 ( r s = - 0.146 , p = 0.44 ). Conclusions: We found that estimated SNR and SpO 2 values show a significant decline and dependence on the melanin index, whereas StO 2 and optical properties do not show any correlation with the melanin index.

Automated Measurement of Speech Recognition, Reaction Time, and Speech Rate and Their Relation to Self-Reported Listening Effort for Normal-Hearing and Hearing-Impaired Listeners Using various Maskers.

In speech audiometry, the speech-recognition threshold (SRT) is usually established by adjusting the signal-to-noise ratio (SNR) until 50% of the words or sentences are repeated correctly. However, these conditions are rarely encountered in everyday situations. Therefore, for a group of 15 young participants with normal hearing and a group of 12 older participants with hearing impairment, speech-recognition scores were determined at SRT and at four higher SNRs using several stationary and fluctuating maskers. Participants' verbal responses were recorded, and participants were asked to self-report their listening effort on a categorical scale (self-reported listening effort, SR-LE). The responses were analyzed using an Automatic Speech Recognizer (ASR) and compared to the results of a human examiner. An intraclass correlation coefficient of r = .993 for the agreement between their corresponding speech-recognition scores was observed. As expected, speech-recognition scores increased with increasing SNR and decreased with increasing SR-LE. However, differences between speech-recognition scores for fluctuating and stationary maskers were observed as a function of SNR, but not as a function of SR-LE. The verbal response time (VRT) and the response speech rate (RSR) of the listeners' responses were measured using an ASR. The participants with hearing impairment showed significantly lower RSRs and higher VRTs compared to the participants with normal hearing. These differences may be attributed to differences in age, hearing, or both. With increasing SR-LE, VRT increased and RSR decreased. The results show the possibility of deriving a behavioral measure, VRT, measured directly from participants' verbal responses during speech audiometry, as a proxy for SR-LE.

Evaluating Lung Changes in Long COVID: Ultra-Low-Dose vs. Standard-Dose CT Chest.

Background: Frequent chest CTs within a short period during follow-up of long COVID patients may increase the risk of radiation-related health effects in the exposed individuals. We aimed to assess the image quality and diagnostic accuracy of ultra-low-dose CT (ULDCT) chest compared to standard-dose CT (SDCT) in detecting lung abnormalities associated with long COVID. Methods: In this prospective study, 100 long COVID patients with respiratory dysfunction underwent SDCT and ULDCT chest that were compared in terms of objective (signal-to-noise ratio, SNR) and subjective image quality (image graininess, sharpness, artifacts, and diagnostic accuracy along with the European guidelines on image quality criteria for CT chest), detection of imaging patterns of long COVID, CT severity score, and effective radiation dose. Additionally, the diagnostic performance of ULDCT was compared among obese (BMI≥30 kg/m2) and non-obese (BMI<30 kg/m2) subjects. Results: The mean age of study participants was 53 ± 12.9 years, and 68% were male. The mean SNR was 31.4 ± 5.5 and 11.3 ± 4.6 for SDCT and ULDCT respectively (p< 0.0001). Common findings seen on SDCT included ground-glass opacities (GGOs, 77%), septal thickening/reticulations (67%), atelectatic/parenchymal bands (63%) and nodules (26%). ULDCT provided sharp images, with no/minimal graininess, and high diagnostic confidence in 81%, 82% and 80% of the cases respectively. The sensitivity of ULDCT for various patterns of long COVID was 72.7% (GGOs), 71.6% (interlobular septal thickening/reticulations), 100% (consolidation), 81% (atelectatic/parenchymal bands) and 76.9% (nodules). ULDCT scans in non-obese subjects exhibited a significantly higher sensitivity (88% vs. 60.3%, p < 0.0001) and diagnostic accuracy (97.7% vs. 84.9%, p < 0.0001) compared to obese subjects. ULDCT showed very strong correlation with SDCT in terms of CT severity score (r = 0.996, p < 0.0001). The mean effective radiation dose with ULDCT was 0.25 ± 0.02 mSv with net radiation dose reduction of 94.8% ± 1.7% (p < 0.0001) when compared to SDCT (5.5 ± 1.96 mSv). Conclusion: ULDCT scans achieved comparable diagnostic accuracy to SDCT for detecting long COVID lung abnormalities in non-obese patients, while significantly reducing radiation exposure.

Mitigating interferences on LEO satellite downlinks of Earth exploration services by cognitive radio, adaptive modulation and coding techniques.

Upcoming Earth Exploration Satellite Services (EESS) missions, especially to monitor Brazilian diversified biomes, will require progressively higher data rates for downlink transmissions, besides the ability to share its frequency spectrum with cellular base stations. Both impact issues on spectral efficiency (in bps/Hz) and coexistence in frequency, time, location, etc. This paper proposes a technique suitable for LEO Earth Observation Satellites (EOS) by combining two strategies. We initially present the Cognitive Radio (CR) spectrum awareness and exploitation approaches to propose techniques for improving their uses. Next, we detail the Adaptive MODulation and CODing (MODCOD) techniques (ACM) based on DVB-S2X systems to increase RF power and spectral efficiencies. Finally, we evaluate our solution by monitoring the Signal to Interference plus Noise Ratio (SINR) and combining CR/MODCOD techniques. Two case studies are presented that demonstrate the proposed approach on Brazilian satellites developed by the National Institute for Space Research (INPE). A real in-situ characterization of the interfering scenarios was performed during the passes of the two EESS satellites that proves the effectiveness of spectral efficiency and coexistence.

A SURF and SVD-based robust zero-watermarking for medical image integrity.

Medical image security is paramount in the digital era but remains a significant challenge. This paper introduces an innovative zero-watermarking methodology tailored for medical imaging, ensuring robust protection without compromising image quality. We utilize Sped-up Robust features for high-precision feature extraction and singular value decomposition (SVD) to embed watermarks into the frequency domain, preserving the original image's integrity. Our methodology uniquely encodes watermarks in a non-intrusive manner, leveraging the robustness of the extracted features and the resilience of the SVD approach. The embedded watermark is imperceptible, maintaining the diagnostic value of medical images. Extensive experiments under various attacks, including Gaussian noise, JPEG compression, and geometric distortions, demonstrate the methodology's superior performance. The results reveal exceptional robustness, with high Normalized Correlation (NC) and Peak Signal-to-noise ratio (PSNR) values, outperforming existing techniques. Specifically, under Gaussian noise and rotation attacks, the watermark retrieved from the encrypted domain maintained an NC value close to 1.00, signifying near-perfect resilience. Even under severe attacks such as 30% cropping, the methodology exhibited a significantly higher NC compared to current state-of-the-art methods.

Effect of Noise Filtering in an Ultraviolet Detector of UHPLC on the Statistical Reliability of Chemometrically Evaluated Repeatability.

A noise filter, which is usually attached to a detector for chromatography, was applied for the improvement of a signal-to-noise ratio (S/N) on a chromatogram. The objective of this paper is to elucidate the effect of noise filtering in an UV detector of ultra HPLC (UHPLC) on the statistical reliability of chemometrically evaluated repeatability by the function of mutual information (FUMI) theory. To examine the statistical reliability of chemometrically evaluated repeatability in the UHPLC system associated with noise filtering, the standard deviation (SD) values of the area in baseline fluctuations with peak region k (s(k)) were obtained from six chromatograms with noise filtering. Further, the average of s(k) values (σ̂) was calculated from the s(k) values (n = 6) to be alternatively applied as the population SD. All s(k)/σ̂ values were within the 95% confidence intervals (CIs) at the freedom degree of 50, indicating the chemometrically estimated relative SD (RSD) of a peak area and RSD by repeated measurements of at least 50 times had equivalent reliability.

A Quantitative Comparison of 31P Magnetic Resonance Spectroscopy RF Coil Sensitivity and SNR between 7T and 10.5T Human MRI Scanners Using a Loop-Dipole 31P-1H Probe.

In vivo phosphorus-31 (31P) magnetic resonance spectroscopy (MRS) imaging (MRSI) is an important non-invasive imaging tool for studying cerebral energy metabolism, intracellular nicotinamide adenine dinucleotide (NAD) and redox ratio, and mitochondrial function. However, it is challenging to achieve high signal-to-noise ratio (SNR) 31P MRS/MRSI results owing to low phosphorus metabolites concentration and low phosphorous gyromagnetic ratio (γ). Many works have demonstrated that ultrahigh field (UHF) could significantly improve the 31P-MRS SNR. However, there is a lack of studies of the 31P MRSI SNR in the 10.5 Tesla (T) human scanner. In this study, we designed and constructed a novel 31P-1H dual-frequency loop-dipole probe that can operate at both 7T and 10.5T for a quantitative comparison of 31P MRSI SNR between the two magnetic fields, taking into account the RF coil B1 fields (RF coil receive and transmit fields) and relaxation times. We found that the SNR of the 31P MRS signal is 1.5 times higher at 10.5T as compared to 7T, and the power dependence of SNR on magnetic field strength (B0) is 1.9.

Ultrashort-Echo-Time MRI of the Disco-Vertebral Junction: Modulation of Image Contrast via Echo Subtraction and Echo Times.

INTRODUCTION: The disco-vertebral junction (DVJ) of the lumbar spine contains thin structures with short T2 values, including the cartilaginous endplate (CEP) sandwiched between the bony vertebral endplate (VEP) and the nucleus pulposus (NP). We previously demonstrated that ultrashort-echo-time (UTE) MRI, compared to conventional MRI, is able to depict the tissues at the DVJ with improved contrast. In this study, we sought to further optimize UTE MRI by characterizing the contrast-to-noise ratio (CNR) of these tissues when either single echo or echo subtraction images are used and with varying echo times (TEs). METHODS: In four cadaveric lumbar spines, we acquired 3D Cones (a UTE sequence) images at varying TEs from 0.032 ms to 16 ms. Additionally, spin echo T1- and T2-weighted images were acquired. The CNRs of CEP-NP and CEP-VEP were measured in all source images and 3D Cones echo subtraction images. RESULTS: In the spin echo images, it was challenging to distinguish the CEP from the VEP, as both had low signal intensity. However, the 3D Cones source images at the shortest TE of 0.032 ms provided an excellent contrast between the CEP and the VEP. As the TE increased, the contrast decreased in the source images. In contrast, the 3D Cones echo subtraction images showed increasing CNR values as the second TE increased, reaching statistical significance when the second TE was above 10 ms (p < 0.05). CONCLUSIONS: Our study highlights the feasibility of incorporating UTE MRI for the evaluation of the DVJ and its advantages over conventional spin echo sequences for improving the contrast between the CEP and adjacent tissues. Additionally, modulation of the contrast for the target tissues can be achieved using either source images or subtraction images, as well as by varying the echo times.