Mesoporous Silicon with Strontium-Powered Poly(Lactic-Co-Glycolic acid)/Gelatin-Based Dressings Facilitate Skin Tissue Repair.

Purpose: Functional inorganic nanomaterials (NMs) are widely exploited as bioactive materials and drug depots. The lack of a stable form of application of NMs at the site of skin injury, may impede the removal of the debridement, elevate pH, induce tissue toxicity, and limit their use in skin repair. This necessitates the advent of innovative wound dressings that overcome the above limitations. The overarching objective of this study was to exploit strontium-doped mesoporous silicon particles (PSiSr) to impart multifunctionality to poly(lactic-co-glycolic acid)/gelatin (PG)-based fibrous dressings (PG@PSiSr) for excisional wound management. Methods: Mesoporous silicon particles (PSi) and PSiSr were synthesized using a chemo-synthetic approach. Both PSi and PSiSr were incorporated into PG fibers using electrospinning. A series of structure, morphology, pore size distribution, and cumulative pH studies on the PG@PSi and PG@PSiSr membranes were performed. Cytocompatibility, hemocompatibility, transwell migration, scratch wound healing, and delineated angiogenic properties of these composite dressings were tested in vitro. The biocompatibility of composite dressings in vivo was assessed by a subcutaneous implantation model of rats, while their potential for wound healing was discerned by implantation in a full-thickness excisional defect model of rats. Results: The PG@PSiSr membranes can afford the sustained release of silicon ions (Si4+) and strontium ions (Sr2+) for up to 192 h as well as remarkably promote human umbilical vein endothelial cells (HUVECs) and NIH-3T3 fibroblasts migration. The PG@PSiSr membranes also showed better cytocompatibility, hemocompatibility, and significant formation of tubule-like networks of HUVECs in vitro. Moreover, PG@PSiSr membranes also facilitated the infiltration of host cells and promoted the deposition of collagen while reducing the accumulation of inflammatory cells in a subcutaneous implantation model in rats as assessed for up to day 14. Further evaluation of membranes transplanted in a full-thickness excisional wound model in rats showed rapid wound closure (PG@SiSr vs control, 96.1% vs 71.7%), re-epithelialization, and less inflammatory response alongside skin appendages formation (eg, blood vessels, glands, hair follicles, etc.). Conclusion: To sum up, we successfully fabricated PSiSr particles and prepared PG@PSiSr dressings using electrospinning. The PSiSr-mediated release of therapeutic ions, such as Si4+ and Sr2+, may improve the functionality of PLGA/Gel dressings for an effective wound repair, which may also have implications for the other soft tissue repair disciplines.

Spatially confined dual-emission nanoprobes assembled from silicon nanoparticles and gold nanoclusters for ratiometric biosensing.

Gold nanoclusters (AuNCs) possess weak intrinsic fluorescence, limiting their sensitivity in biosensing applications. This study addresses these limitations by developing a spatially confined dual-emission nanoprobe composed of silicon nanoparticles (SiNPs) and AuNCs. This amplified and stabilized fluorescence mechanism overcomes the limitations associated with using AuNCs alone, achieving superior sensitivity in the sensing platform. The nanoprobe was successfully employed for ratiometric detection of bleomycin (BLM) in serum samples, operating at an excitation wavelength of 365 nm, with emission wavelengths at 480 nm and 580 nm. The analytical performance of the system is distinguished by a linear detection range of 0-3.5 µM, an impressive limit of detection (LOD) of 35.27 nM, and exceptional recoveries ranging from 96.80 to 105.9%. This innovative approach significantly enhances the applicability and reliability of AuNC-based biosensing in complex biological media, highlighting its superior analytical capabilities.

Enhancing growth and bioactive metabolites characteristics in Mentha pulegium L. via silicon nanoparticles during in vitro drought stress.

The development and production of secondary metabolites from priceless medicinal plants are restricted by drought stress. Mentha pulegium L. belongs to the Lamiaceae family and is a significant plant grown in the Mediterranean region for its medicinal and aesthetic properties. This study investigated the effects of three polyethylene glycol (PEG) (0, 5, and 10%) as a drought stress inducer and four silicon nanoparticle (SiNP) (0, 25, 50, and 100 ppm) concentrations as an elicitor to overcome the adverse effect of drought stress, on the growth parameters and bioactive chemical composition of M. pulegium L. plants grown in vitro. The experiment was performed as a factorial experiment using a completely randomized design (CRD) consisting of 12 treatments with two factors (3 PEG × 4 SiNPs concentrations), 6 replicates were used for each treatment for a total of 72 experimental units.The percentage of shoot formation was inversely proportional to the PEG concentration; for the highest PEG concentration, the lowest percentage of shoot formation (70.26%) was achieved at 10% PEG. SiNPs at 50 ppm enhanced shoot formation, the number of shoots, shoot height, fresh and dry weight, rosmarinic acid, total phenols, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity. The methanol extract from M. pulegium revealed the presence of significant secondary metabolites using gas chromatography‒mass spectrometry (GC-MS). The principal constituents of the extract were limonene (2.51, 2.99%), linalool (3.84, 4.64%), geraniol (6.49, 8.77%), menthol (59.73, 65.43%), pulegone (3.76, 2.76%) and hexadecanoic acid methyl ester or methyl palmitate (3.2, 4.71%) for the 0 ppm SiNPs, PEG 0% and 50 ppm SiNPs, and PEG 10%, respectively. Most of the chemical components identified by GC‒MS in the methanol extract were greater in the 50 ppm SiNP and 10% PEG treatment groups than in the control group. SiNP improves drought tolerance by regulating biosynthesis and accumulating some osmolytes and lessens the negative effects of polyethylene glycol-induced drought stress.Based on the results, the best treatment for most of the parameters was 50 ppm SiNPs combined with 10% PEG, the morphological and chemical characteristics were inversely proportional to the PEG concentration, as the highest PEG concentration (10%) had the lowest results. Most parameters decreased at the highest SiNP concentration (100 ppm), except for the DPPH scavenging percentage, as there was no significant difference between the 50 and 100 ppm SiNPs.

Effect of silicon spraying on rice photosynthesis and antioxidant defense system on cadmium accumulation.

Cadmium (Cd) pollution is a serious threat to food safety and human health. Minimizing Cd uptake and enhancing Cd tolerance in plants are vital to improve crop yield and reduce hazardous effects to humans. In this study, we designed three Cd concentration stress treatments (Cd1: 0.20 mg·kg-1, Cd2: 0.60 mg·kg-1, and Cd3: 1.60 mg·kg-1) and two foliar silicon (Si) treatments (CK: no spraying of any material, and Si: foliar Si spraying) to conduct pot experiments on soil Cd stress. The results showed that spraying Si on the leaves reduced the Cd content in brown rice by 4.79-42.14%. Si application increased net photosynthetic rate (Pn) by 1.77-4.08%, stomatal conductance (Gs) by 5.27-23.43%, transpiration rate (Tr) by 2.99-20.50% and intercellular carbon dioxide (CO2) concentration (Ci) by 6.55-8.84%. Foliar spraying of Si significantly increased the activities of superoxide dismutase (SOD) and peroxidase (POD) in rice leaves by 9.84-14.09% and 4.69-53.09%, respectively, and reduced the content of malondialdehyde (MDA) by 7.83-48.72%. In summary, foliar Si spraying protects the photosynthesis and antioxidant system of rice canopy leaves, and is an effective method to reduce the Cd content in brown rice.

60Co gamma radiation effects on NPN transistor at cryogenic temperature.

The 60Co gamma radiation effects on the DC electrical characteristics of silicon NPN transistor were studied in the dose range of 100 krad to 6 Mrad at room temperature (300 K) and cryogenic temperature (77 K). The measurements were carried out at both 300 and 77 K temperature. The electrical characteristics such as Gummel characteristics, excess base current (ΔIB), current gain (hFE), transconductance (gm) and output characteristics were studied in situ as a function of total dose. The results show that there is a considerable degradation in the electrical parameters of the device irradiated both at 300 and 77 K as a consequence of increase in excess base current (ΔIB) because of the formation of generation and recombination centers in the emitter-base spacer oxide (SiO2). At cryogenic temperature irradiation, the degradation in electrical characteristics is less because of the physical phenomena such as carrier freezeout effect, decreased recombination rate, reduced charge yield, decreased electron mobility, etc.

A silicon diode-based optoelectronic interface for bidirectional neural modulation.

The development of advanced neural modulation techniques is crucial to neuroscience research and neuroengineering applications. Recently, optical-based, nongenetic modulation approaches have been actively investigated to remotely interrogate the nervous system with high precision. Here, we show that a thin-film, silicon (Si)-based diode device is capable to bidirectionally regulate in vitro and in vivo neural activities upon adjusted illumination. When exposed to high-power and short-pulsed light, the Si diode generates photothermal effects, evoking neuron depolarization and enhancing intracellular calcium dynamics. Conversely, low-power and long-pulsed light on the Si diode hyperpolarizes neurons and reduces calcium activities. Furthermore, the Si diode film mounted on the brain of living mice can activate or suppress cortical activities under varied irradiation conditions. The presented material and device strategies reveal an innovated optoelectronic interface for precise neural modulations.

Sensitivity analysis of bi-metal stacked-gate-oxide hetero-juncture tunnel fet with Si0.6Ge0.4 source biosensor considering non-ideal factors.

This article provides insights in designing a dielectrically modulated biosensor by adopting high-k stacked gate oxide proposition in a bi-metal hetero-juncture Tunnel Field Effect Transistor (BM-SO-HTFET) with Si0.6Ge0.4 source. The integrated effect of heterojunction and stacked gate oxide leads to enhanced electrical performance of the proposed device in terms of carrier mobility and suppressed leakage current. Nano-cavity engraved beneath the bi-metal gate structure across the source/channel end acts the binding site of the biomolecules to be detected. This Configuration leads to improved control of biomolecules over source/channel tunnelling rate and the same is reflected in the sensing ability of the device while extracting the ON current sensitivity (SON) of the sensor. The reported biosensor is simulated using Silvaco ATLAS calibrated simulation framework. The analysis of the device sensitivity is carried out varying dielectric constants (k) of various biomolecules, both neutral as well as charged. Our study reveals that BM-SO-HTFET with Ge mole fraction composition x = 0.4 exhibits sensitivity as high as 4.1 × 1010 for neutral biomolecules and 3.2 × 1011 for positively charged biomolecules with k = 12. Furthermore, a transient response profile for the drain current with various biomolecules is explored to determine the varying settling time. From the simulation results, it is noted that BM-SO-HTFET exhibits ON current sensitivity of 4.1 × 1010 and 3.2 × 1011 for neutral and charged biomolecules respectively. In addition to this, for highly sensitive and real time detection of biomolecules, the impact of temperature and certain non-ideal factors drifting from ideal case of fully filled cavity have also been considered to analyze its optimum sensing performance.

A biodegradable and flexible neural interface for transdermal optoelectronic modulation and regeneration of peripheral nerves.

Optoelectronic neural interfaces can leverage the photovoltaic effect to convert light into electrical current, inducing charge redistribution and enabling nerve stimulation. This method offers a non-genetic and remote approach for neuromodulation. Developing biodegradable and efficient optoelectronic neural interfaces is important for achieving transdermal stimulation while minimizing infection risks associated with device retrieval, thereby maximizing therapeutic outcomes. We propose a biodegradable, flexible, and miniaturized silicon-based neural interface capable of transdermal optoelectronic stimulation for neural modulation and nerve regeneration. Enhancing the device interface with thin-film molybdenum significantly improves the efficacy of neural stimulation. Our study demonstrates successful activation of the sciatic nerve in rodents and the facial nerve in rabbits. Moreover, transdermal optoelectronic stimulation accelerates the functional recovery of injured facial nerves.

Development of automated proteomic workflows utilizing silicon-based coupling agents.

Automated methods for enzyme immobilization via 4-triethoxysilylbutyraldehyde (TESB) derived silicone-based coupling agents were developed. TESB and its oxidized derivative, 4-triethoxysilylbutanoic acid (TESBA), were determined to be the most effective. The resulting immobilized enzyme particles (IEPs) displayed robustness, rapid digestion, and immobilization efficiency of 51 ± 8%. Furthermore, we automated the IEP procedure, allowing for multiple enzymes, and/or coupling agents to be fabricated at once, in a fraction of the time via an Agilent Bravo. The automated trypsin TESB and TESBA IEPs were shown to rival a classical in-gel digestion method. Moreover, pepsin IEPs favored cleavage at leucine (>50%) over aromatic and methionine residues. The IEP method was then adapted for an in-situ immobilized enzyme microreactor (IMER) fabrication. We determined that TESBA could functionalize the silica capillary's inner wall while simultaneously acting as an enzyme coupler. The IMER digestion of bovine serum albumin (BSA), mirroring IEP digestion conditions, yielded a 33-40% primary sequence coverage per LC-MS/MS analysis in as little as 15 min. Overall, our findings underscore the potential of both IEP and IMER methods, paving the way for automated analysis and a reduction in enzyme waste through reuse, thereby contributing to a more cost-effective and timely study of the proteome. SIGNIFICANCE: This research introduces 4-triethoxysilylbutyraldehyde (TESB) and its derivatives as silicon-based enzyme coupling agents and an automated liquid handling method for bottom-up proteomics (BUP) while streamlining sample preparation for high-throughput processing. Additionally, immobilized enzyme particle (IEP) fabrication and digestion within the 96-well plate allows for flexibility in protocol where different enzyme-coupler combinations can be employed simultaneously. By enabling the digestion of entire microplates and reducing manual labor, the proposed method enhances reproducibility and offers a more efficient alternative to classical in-gel techniques. Furthermore, pepsin IEPs were noted to favor cleavage at leucine residues which represents an interesting finding when compared to the literature that warrants further study. The capability of immobilized enzyme microreactors (IMER) for rapid digestion (in as little as 15 min) demonstrated the system's efficiency and potential for rapid proteomic analysis. This advancement in BUP not only improves efficiency, but also opens avenues for a fully automated, mass spectrometry-integrated proteomics workflow, promising to expedite research and discoveries in complex biological studies.

Porous silicon-based sensing and delivery platforms for wound management applications.

Wound management remains a great challenge for clinicians due to the complex physiological process of wound healing. Porous silicon (PSi) with controlled pore morphology, abundant surface chemistry, unique photonic properties, good biocompatibility, easy biodegradation and potential bioactivity represent an exciting class of materials for various biomedical applications. In this review, we focus on the recent progress of PSi in the design of advanced sensing and delivery systems for wound management applications. Firstly, we comprehensively introduce the common type, normal healing process, delaying factors and therapeutic drugs of wound healing. Subsequently, the typical fabrication, functionalization and key characteristics of PSi have been summarized because they provide the basis for further use as biosensing and delivery materials in wound management. Depending on these properties, the rise of PSi materials is evidenced by the examples in literature in recent years, which has emphasized the robust potential of PSi for wound monitoring, treatment and theranostics. Finally, challenges and opportunities for the future development of PSi-based sensors and delivery systems for wound management applications are proposed and summarized. We hope that this review will help readers to better understand current achievements and future prospects on PSi-based sensing and delivery systems for advanced wound management.

Si, O-Codoped Carbonized Polymer Dots with High Chemiresistive Gas Sensing Performance at Room Temperature.

A new type of carbonized polymer dot was prepared by the one-step hydrothermal method of triethoxylsilane (TEOS) and citric acid (CA). The sensor made from carbonized polymer dots (CPDs) showed superior gas sensing performance toward ammonia at room temperature. The Si, O-codoped CPDs exhibited superior ammonia sensing performance at room temperature, including a low practical limit of detection (pLOD) of 1 ppm (Ra/Rg: 1.10, 1 ppm), short response/recovery time (30/36 s, 1 ppm), high humidity resistance (less than 5% undulation when changing relative humidity to 80 from 30%), high stability (less than 5% initial response undulation after 120 days), reliable repeatability, and high selectivity against other interferential gases. The gas sensing mechanism was investigated through control experiments and in situ FTIR, indicating that Si, O-codoping essentially improves the electron transfer capability of CPDs and synergistically dominates the superior ammonia sensing properties of the CPDs. This work presents a facile strategy for constructing novel high-performance, single-component carbonized polymer dots for gas sensing.

Exogenous silicon induces aluminum tolerance in white clover (Trifolium repens) by reducing aluminum uptake and enhancing organic acid secretion.

Excessive aluminum (Al) in acidic soils is a primary factor that hinders plant growth. The objective of the present study was to investigate the effect and physiological mechanism of exogenous silicon (Si) in alleviating aluminum toxicity. Under hydroponic conditions, 4 mM Al significantly impeded the growth of white clover; however, pretreatments with 1 mM Si mitigated this inhibition, as evidenced by notable changes in growth indicators and physiological parameters. Exogenous silicon notably increased both shoot and root length of white clover and significantly decreased electrolyte leakage (EL) and malondialdehyde (MDA) content compared to aluminum treatments. This positive effect was particularly evident in the roots. Further analysis involving hematoxylin staining, scanning electron microscopy (SEM), and examination of organic acids (OAs) demonstrated that silicon relieved the accumulation of bioactive aluminum and ameliorated damage to root tissues in aluminum-stressed plants. Additionally, energy-dispersive X-ray (EDX) analysis revealed that additional silicon was primarily distributed in the root epidermal and cortical layers, effectively reducing the transport of aluminum and maintaining the balance of exchangeable cations absorption. These findings suggest that gradual silicon deposition in root tissues effectively prevents the absorption of biologically active aluminum, thereby reducing the risk of mineral nutrient deficiencies induced by aluminum stress, promoting organic acids exudation, and compartmentalizing aluminum in the outer layer of root tissues. This mechanism helps white clover alleviate the damage caused by aluminum toxicity.

Experimental study of slow-released Angiogenin by silicon micro-needle in improving blood support to multiple-territory perforator flaps in rats.

This research aimed to investigate the effect of slow-released angiogenin by silicon micro-needle on angiogenesis in the Choke zone of dorsal multiple-territory perforator flap in rats, as well as its mechanism. Thirty-six adult Sprague-Dawley (SD) rats were randomly divided into control group, model group, and four experimental groups. In model group, slow-release saline through a silicon micro-needle was placed in choke II zone of the flap 7 days before the operation. For rats in four experimental groups, angiogenin was released via micro-needle in the choke I and choke II zones of the cross-zone flap 7 days before and 3 days before flap surgery, respectively. A 12 cm × 3 cm cross-zone perforator flap model was made on the back of all five groups. The flap survival rate in slow-release angiopoietin group was statistically higher than that in model group (P<0.05). Angiogenin in choke zone of the flap was increased in slow-release angiogenin group (P<0.05). In slow-release angiogenin group, the micro-vessel density was increased and the arteriovenous diameter was decreased, while the arteriovenous diameter was increased in model group (P<0.05). The levels of vascular endothelial growth factor A (VEGF-A) and angiotensin 1 (ANG-1) in choke zone were both elevated in slow-release angiogenin group (P<0.05). The expression of CD31 was significantly elevated in flaps of experimental groups (P<0.05). Micro-needle to slow release Angiogenin can increase the drug concentration in the tissues of the choke zone, promote the vascularization of rat dorsal crossover area perforator flap, reduce the possibility of flap ischemic necrosis, and improve the flap survival rate.

Silicon-calcium fertilizer increased rice yield and quality by improving soil health.

It is important to ensure the nutritional quality and safe production of rice. Here, plot experiments were used to analyze the effects of three soil amendments-10 t ha-1 of biochar (BC), 1.5 t ha-1 of lime (LM), and 2.25 t ha-1 of silicon-calcium fertilizer (SC)-on the soil characteristics, rice yield and quality of double-cropping rice grown in mildly cadmium-polluted paddy fields. Compared with the control treatment (CK), the BC and SC treatments significantly improved rice processing, appearance and nutritional quality, but reduced cooking quality. All three soil amendments significantly reduced cadmium (Cd) content in brown rice. Soil amendments could significantly increase soil pH and reduce soil available Cd content. The application of the BC and SC treatments increased the content of each nutrient index in the soil (SOM, NN, AP, AK). Correlation analysis showed that the improvement in rice processing, appearance, and nutritional quality was mainly affected by the comprehensive effects of soil SOM, NN, AP and AK; the hygiene quality was mainly affected by soil pH and available Cd. In terms of benefit analysis combined with cost, the SC treatment had the highest benefit effect. Taken together, in mildly cadmium-polluted paddy fields, the application of silicon-calcium fertilizer improved the soil quality, thereby increased the yield and quality of rice, and had the best effect on increasing income.

Recycling of Ti and Si from Ti-bearing blast furnace slag and diamond wire saw silicon waste by flux alloying technique.

Two industrial solid wastes, Ti-bearing blast furnace slag (TBFS) and diamond wire saw silicon waste (DWSSW), contain large amounts of Ti and Si, and their accumulation wastes resources and intensifies environmental pollution. In the present study, DWSSW was used as the silicon source to reduce titanium oxide in TBFS by electromagnetic induction smelting, and meanwhile Na3AlF6 was added as a flux to improve the recycling of the wastes. Ti and Si of the two wastes were simultaneously recovered in the form of alloy. The effects of different addition amount of Na3AlF6 flux in the mixture of DWSSW and TBFS on chemical composition, viscosity, basicity and structure of slag were investigated. The dissolution behavior of SiO2 in Na3AlF6 flux was theoretically deduced and experimentally verification. The optimized recovery rate of Ti and Si were obtained, and the research realizes the efficient recycling of DWSSW and TBFS simultaneously.

Silanization Strategies for Tailoring Peptide Functionalization on Silicon Surfaces: Implications for Enhancing Stem Cell Adhesion.

Biomaterial surface engineering and the integration of cell-adhesive ligands are crucial in biological research and biotechnological applications. The interplay between cells and their microenvironment, influenced by chemical and physical cues, impacts cellular behavior. Surface modification of biomaterials profoundly affects cellular responses, especially at the cell-surface interface. This work focuses on enhancing cellular activities through material manipulation, emphasizing silanization for further functionalization with bioactive molecules such as RGD peptides to improve cell adhesion. The grafting of three distinct silanes onto silicon wafers using both spin coating and immersion methods was investigated. This study sheds light on the effects of different alkyl chain lengths and protecting groups on cellular behavior, providing valuable insights into optimizing silane-based self-assembled monolayers (SAMs) before peptide or protein grafting for the first time. Specifically, it challenges the common use of APTES molecules in this context. These findings advance our understanding of surface modification strategies, paving the way for tailoring biomaterial surfaces to modulate the cellular behavior for diverse biotechnological applications.

Optical coupling of individual air-suspended carbon nanotubes to silicon microcavities.

Carbon nanotubes are a telecom band emitter compatible with silicon photonics, and when coupled to microcavities, they present opportunities for exploiting quantum electrodynamical effects. Microdisk resonators demonstrate the feasibility of integration into the silicon platform. Efficient coupling is achieved using photonic crystal air-mode nanobeam cavities. The molecular screening effect on nanotube emission allows for spectral tuning of the coupling. The Purcell effect of the coupled cavity-exciton system reveals near-unity radiative quantum efficiencies of the excitons in carbon nanotubes.

Implantable photonic neural probes with out-of-plane focusing grating emitters.

We have designed, fabricated, and characterized implantable silicon neural probes with nanophotonic grating emitters that focus the emitted light at a specified distance above the surface of the probe for spatially precise optogenetic targeting of neurons. Using the holographic principle, we designed gratings for wavelengths of 488 and 594 nm, targeting the excitation spectra of the optogenetic actuators Channelrhodopsin-2 and Chrimson, respectively. The measured optical emission pattern of these emitters in non-scattering medium and tissue matched well with simulations. To our knowledge, this is the first report of focused spots with the size scale of a neuron soma in brain tissue formed from implantable neural probes.

Purification and preparation of pure SiC with silicon cutting waste.

Recycling silicon cutting waste (SCW) plays a pivotal role in reducing environmental impact and enhancing resource efficiency within the semiconductor industry. Herein SCW was utilized to prepare SiC and ultrasound-assisted leaching was investigated to purify the obtained SiC and the leaching factors were optimized. The mixed acids of HF/H2SO4 works efficiently on the removal of Fe and SiO2 due to that HF can react with SiO2 and Si and then expose the Fe to H+. The assistance of ultrasound can greatly improve the leaching of Fe, accelerate the leaching rate, and lower the leaching temperature. The optimal leaching conditions are HF-H2SO4 ratio of 1:3, acid concentration of 3 mol/L, temperature of 50 °C, ultrasonic frequency of 45 kHz and power of 210 W, and stirring speed of 300 rpm. The optimal leaching ratio of Fe is 99.38%. Kinetic analysis shows that the leaching process fits the chemical reaction-controlled model.

Role of silicon in alleviating boron toxicity and enhancing growth and physiological traits in hydroponically cultivated Zea mays var. Merit.

BACKGROUND: Boron (B) is a micronutrient, but excessive levels can cause phytotoxicity, impaired growth, and reduced photosynthesis. B toxicity arises from over-fertilization, high soil B levels, or irrigation with B-rich water. Conversely, silicon (Si) is recognized as an element that mitigates stress and alleviates the toxic effects of certain nutrients. In this study, to evaluate the effect of different concentrations of Si on maize under boron stress conditions, a factorial experiment based on a randomized complete block design was conducted with three replications in a hydroponic system. The experiment utilized a nutrient solution for maize var. Merit that contained three different boron (B) concentrations (0.5, 2, and 4 mg L-1) and three Si concentrations (0, 28, and 56 mg L-1). RESULTS: Our findings unveiled that exogenous application of B resulted in a substantial escalation of B concentration in maize leaves. Furthermore, B exposure elicited a significant diminution in fresh and dry plant biomass, chlorophyll index, chlorophyll a (Chl a), chlorophyll b (Chl b), carotenoids, and membrane stability index (MSI). As the B concentration augmented, malondialdehyde (MDA) content and catalase (CAT) enzyme activity exhibited a concomitant increment. Conversely, the supplementation of Si facilitated an amelioration in plant fresh and dry weight, total carbohydrate, and total soluble protein. Moreover, the elevated activity of antioxidant enzymes culminated in a decrement in hydrogen peroxide (H2O2) and MDA content. In addition, the combined influence of Si and B had a statistically significant impact on the leaf chlorophyll index, total chlorophyll (a + b) content, Si and B accumulation levels, as well as the enzymatic activities of guaiacol peroxidase (GPX), ascorbate peroxidase (APX), and H2O2 levels. These unique findings indicated the detrimental impact of B toxicity on various physiological and biochemical attributes of maize, while highlighting the potential of Si supplementation in mitigating the deleterious effects through modulation of antioxidant machinery and biomolecule synthesis. CONCLUSIONS: This study highlights the potential of Si supplementation in alleviating the deleterious effects of B toxicity in maize. Increased Si consumption mitigated chlorophyll degradation under B toxicity, but it also caused a significant reduction in the concentrations of essential micronutrients iron (Fe), copper (Cu), and zinc (Zn). While Si supplementation shows promise in counteracting B toxicity, the observed decrease in Fe, Cu, and Zn concentrations warrants further investigation to optimize this approach and maintain overall plant nutritional status.