ABSTRACT
Plastic production has experienced a significant increase in the last sixty years due to its cost-efficiency and adaptable characteristics, leading to the extensive use of additives to improve its performance and longevity. Due to the high demand for plastic, plastic waste production has increased, contaminating the environment and living beings by leaching additives, among other substances. Pyrolysis stands out among recycling techniques because it can handle mixed polymer waste feedstock. However, understanding the pyrolyzates distribution of additives is fundamental to assessing pyrolysis process of plastic waste. This study investigated the pyrolysis product distributions of two commonly used antioxidants, namely, Irgafos 168 and zinc stearate (ZnSt), using one-dimensional gas chromatography equipped with a quadruple mass spectrometer (GC-MS) and two-dimensional gas chromatography coupled to flame ionization detector and time-of-flight mass spectrometer (GC×GC-FID/TOF-MS). While GC separation technique provided limited information on product distribution, GC×GC offered enhanced resolution and identification of the decomposition products. In the pyrolysis of Irgafos 168 at 550 °C, GC identified 18 products, while GC×GC identified 198 products, representing an increase of approximately 11-fold. Similarly, for ZnSt, GC identified 67 products, while GC×GC identified 434 products, representing a 6-fold increase. GC×GC identified decomposition products from 15 different chemical classes for Irgafos 168 and 16 chemical classes for ZnSt, compared to 4 and 11 chemical classes identified by GC, respectively. Phenols and their derivatives were the major chemical class in the decomposition products of Irgafos 168 with a yield of 9.51 wt.%. In contrast, olefinic products were the dominant ones for ZnSt, with a yield of 9.73 wt.%. The major decomposition product of Irgafos 168 and ZnSt was 2tertbutylmethylphenol (C11H16O) and C6 olefin (C6H12) with yields of 3.88 wt.%, and 1.13 wt.%, respectively. Utilizing the GC×GC separation method improved the ability to identify decomposition products, which can ultimately lead to a better understanding of antioxidant degradation that occurs during the pyrolysis process. GC×GC also provided thorough characterization of minor and co-eluted products along with major antioxidant degradation products. Additionally, the decomposition product distribution of Irgafos 168 and ZnSt was also compared with the primary antioxidants, Irganox 1010, Irganox 1076, and BHT, studied in part 1. The analysis indicated that the olefinic chemical class was the predominant one in Irganox 1010, Irganox 1076, and ZnSt, while ketones were the major chemical class in the decomposition of BHT and phenolics had the highest yield in Irgafos 168.
Subject(s)
Antioxidants , Gas Chromatography-Mass Spectrometry , Pyrolysis , Stearic Acids , Gas Chromatography-Mass Spectrometry/methods , Antioxidants/analysis , Antioxidants/chemistry , Stearic Acids/analysis , Stearic Acids/chemistry , Chromatography, Gas/methods , Plastics/chemistryABSTRACT
Inflammation is implicated in the etiology of obesity-related diseases. Thromboxane-prostanoid receptor (TPR) is known to play a role in mediating an inflammatory response in a variety of cells. Gut-derived lipopolysaccharide (LPS), a TLR4 agonist, is elevated in obesity. Moreover, free fatty acids (FFAs) are important mediators of obesity-related inflammation. However, the role and mechanisms by which TPR regulates the inflammatory response in human immune cells remain unclear. We sought to determine the link between TPR and obesity and the role/mechanisms by which TPR alters LPS- or stearic acid (SA)-induced inflammatory responses in PBMCs. Cells were pre-treated with agents blocking TPR signaling, followed by treatment with LPS or stearic acid (SA). Our findings showed that TPR mRNA levels are higher in PBMCs from individuals with obesity. Blockade of TPR as well as ROCK, which acts downstream of TPR, attenuated LPS- and/or SA-induced pro-inflammatory responses. On the other hand, TPR activation using its agonist enhanced the pro-inflammatory effects of LPS and/or SA. Of note, the TPR agonist by itself elicits an inflammatory response, which was attenuated by blocking TPR or ROCK. Our data suggest that TPR plays a key role in promoting an inflammatory response in human PBMCs, and this effect is mediated via TLR4 and/or ROCK signaling.
Subject(s)
Inflammation , Leukocytes, Mononuclear , Lipopolysaccharides , Receptors, Thromboxane , Signal Transduction , Stearic Acids , Humans , Lipopolysaccharides/pharmacology , Leukocytes, Mononuclear/metabolism , Leukocytes, Mononuclear/drug effects , Stearic Acids/pharmacology , Signal Transduction/drug effects , Inflammation/pathology , Inflammation/metabolism , Receptors, Thromboxane/metabolism , Receptors, Prostaglandin/metabolism , Obesity/metabolism , Male , FemaleABSTRACT
The goal of this research was to analyse the synergistic effect between selected plant extracts with zinc oxide particles, and zinc stearate. The influence of ZnO on the antimicrobial effectiveness of the selected extracts was confirmed in previous research carried out by the authors. However, the impact of zinc stearate on extract activity has yet to be analysed. The aim was to cover PLA films with active coatings based on hydroxy-propyl-methyl-cellulose (HPMC), or/and ethyl cellulose (EC) containing plant extracts and ZnO which has a synergistic effect. An additional aim was to use a CO2 extract of raspberry seed (RSE) with zinc stearate as active additives within the coatings. An examination of the antimicrobial properties (against Staphylococcus aureus, Escherichia coli, Bacillus subtilis, Pseudomonas syringae and Φ6 bacteriophage) of the covered films, as well as an investigation of layer presence with regards to PLA morphology (SEM, ATR-FTIR analysis) was carried out. The research work that was performed indicated that black chokeberry extract (ChE) and zinc oxide particles were effective against S. aureus, P. syringae and B. subtilis strains. In addition, the ChE with zinc stearate (ZnSt) was active against all analysed strains. The HPMC with ChE and ZnO as additives had antimicrobial properties against S. aureus, P. syringae and E. coli strains. The ChE was found to inhibit the growth of all of the analysed bacterial strains. When considering the coatings based on EC with the CO2 extract of raspberry seed (RSE) and ZnO, it was noted that they were only active against Gram-negative bacteria. The results of the experiments confirmed that AC1 (EC with RSE with ZnO) and AC2 (EC with RSE with ZnSt) coatings were not active against a phi6 bacteriophage. The HPMC coating containing the AC3 layer (ChE and ZnO) eliminated Φ6 particles, confirming its antiviral properties. In addition, the presence of the active (AC1, AC2 and AC3) coatings was confirmed by SEM and FTIR analysis.
Subject(s)
Plant Extracts , Rubus , Zinc Oxide , Zinc Oxide/chemistry , Zinc Oxide/pharmacology , Plant Extracts/pharmacology , Plant Extracts/chemistry , Rubus/chemistry , Microbial Sensitivity Tests , Stearic Acids/chemistry , Stearic Acids/pharmacology , Anti-Infective Agents/pharmacology , Anti-Infective Agents/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Escherichia coli/drug effects , Escherichia coli/growth & development , Bacillus subtilis/drug effects , Staphylococcus aureus/drug effectsABSTRACT
Genistein (Gen); a naturally occurring isoflavone, acts as a tyrosine kinase inhibitor and efficiently downregulates inflammatory cytokines, which are pivotal in eye inflammation. Also, Gen suffers from sparse ocular bioavailability due to poor solubility. In this work, nanostructured lipid carriers (NLCs) were successfully fabricated by using solid (stearic acid and compritol) and liquid (oleic acid) lipids. The optimized Gen-loaded NLCs showed a nanosize range of 140-246 nm, ≥ 98 % entrapment efficiency, and controlled release over 48 h. The ζ-potential of NLCs was increased from -27.3 mV to 25-27.4 mV due to surface modification with chitosan (CS) or eudragit RS100 (ERS 100). All NLCs showed prominent biocompatibility with enhanced cellular uptake on corneal stromal fibroblasts. Moreover, the different NLCs were incorporated into a mucoadhesive in situ gel. The optimized in situ gel (G9), containing 20 % poloxamers and 0.5 % hydroxyethyl cellulose, exhibited excellent gelling ability within 10.5 s, gelling temperature at 33.1 ± 0.6 â, spreadability diameter of 4.73 ± 0.12 cm, shear-thinning behavior, and 20 min ex vivo mucoadhesion time with drug release for 120 h. The in vivo results showed distinguished permeation and distribution potential for ocular delivery. In vivo anti-inflammatory effects after 3 days of treatment with CS-Gen-NLCs/G9 and ERS-Gen-NLCs/G9 revealed a downregulation of interleukin-6 levels in the cornea and retina compared to the untreated group. Our research highlights the promising anti-inflammatory potential of ERS-Gen-NLCs/G9 as an efficient, non-irritant Gen nanodelivery system for managing anterior and posterior ocular inflammation.
Subject(s)
Anti-Inflammatory Agents , Chitosan , Drug Carriers , Drug Liberation , Gels , Genistein , Genistein/administration & dosage , Genistein/pharmacokinetics , Genistein/pharmacology , Animals , Anti-Inflammatory Agents/administration & dosage , Anti-Inflammatory Agents/pharmacokinetics , Anti-Inflammatory Agents/pharmacology , Anti-Inflammatory Agents/chemistry , Chitosan/chemistry , Drug Carriers/chemistry , Rabbits , Acrylic Resins/chemistry , Lipids/chemistry , Nanostructures/administration & dosage , Male , Cornea/metabolism , Cornea/drug effects , Fibroblasts/drug effects , Fibroblasts/metabolism , Administration, Ophthalmic , Stearic Acids/chemistry , Nanoparticles , Oleic Acid/chemistry , Delayed-Action Preparations , HumansABSTRACT
Over the past decade, continuous manufacturing has garnered significant attention in the pharmaceutical industry. Still, numerous continuous unit operations need developments, such as powder blending and feeding at low and high throughputs. Especially the continuous and consistent feeding of solid drug substances and excipients at low feed rates remains challenging. This study demonstrates a micro-feeder capable of feeding poorly-flowing pharmaceutical powders at low feed rates. The system performance was investigated using three grades of pharmaceutical powder: croscarmellose sodium (cohesive), magnesium stearate (very cohesive), and an active ingredient, paracetamol (non-flowing). The results show that the micro-feeder can continuously and consistently feed powders at low flow rates (<20 g/h) with low variability (<10 % for non-flowing materials and < 5 % for cohesive materials). Notably, the micro-feeder achieves these results without any feedback control and remains unaffected by refilling, making it a truly versatile and industry-relevant solution. The study's results demonstrate that this micro-feeder system effectively tackles the challenge of consistent and accurate powder feeding at low rates.
Subject(s)
Acetaminophen , Excipients , Powders , Stearic Acids , Technology, Pharmaceutical , Powders/chemistry , Acetaminophen/chemistry , Stearic Acids/chemistry , Excipients/chemistry , Technology, Pharmaceutical/methods , Carboxymethylcellulose Sodium/chemistry , Drug Compounding/methods , Chemistry, Pharmaceutical/methods , Drug Industry/methodsABSTRACT
Dietary lipids play an essential role in regulating the function of the gut microbiota and gastrointestinal tract, and these luminal interactions contribute to mediating host metabolism. Palmitic Acid Hydroxy Stearic Acids (PAHSAs) are a family of lipids with antidiabetic and anti-inflammatory properties, but whether the gut microbiota contributes to their beneficial effects on host metabolism is unknown. Here, we report that treating chow-fed female and male germ-free (GF) mice with PAHSAs improves glucose tolerance, but these effects are lost upon high fat diet (HFD) feeding. However, transfer of feces from PAHSA-treated, but not vehicle-treated, chow-fed conventional mice increases insulin sensitivity in HFD-fed GF mice. Thus, the gut microbiota is necessary for, and can transmit, the insulin-sensitizing effects of PAHSAs in HFD-fed GF male mice. Analyses of the cecal metagenome and lipidome of PAHSA-treated mice identified multiple lipid species that associate with the gut commensal Bacteroides thetaiotaomicron (Bt) and with insulin sensitivity resulting from PAHSA treatment. Supplementing live, and to some degree, heat-killed Bt to HFD-fed female mice prevented weight gain, reduced adiposity, improved glucose tolerance, fortified the colonic mucus barrier and reduced systemic inflammation compared to HFD-fed controls. These effects were not observed in HFD-fed male mice. Furthermore, ovariectomy partially reversed the beneficial Bt effects on host metabolism, indicating a role for sex hormones in mediating the Bt probiotic effects. Altogether, these studies highlight the fact that PAHSAs can modulate the gut microbiota and that the microbiota is necessary for the beneficial metabolic effects of PAHSAs in HFD-fed mice.
Subject(s)
Diet, High-Fat , Gastrointestinal Microbiome , Insulin Resistance , Obesity , Animals , Male , Female , Mice , Gastrointestinal Microbiome/drug effects , Obesity/metabolism , Obesity/microbiology , Obesity/etiology , Diet, High-Fat/adverse effects , Mice, Inbred C57BL , Stearic Acids/metabolism , Palmitic Acid/metabolism , Feces/microbiology , Mice, ObeseABSTRACT
Previous RS5 (type 5 resistant starch) research has significantly broadened starch use and benefited society, yet the effects of the molecular weight of amylose on RS5 remain underexplored. In this study, amyloses with different molecular weights were complexed with caproic acid (C6), lauric acid (C12), and stearic acid (C18) to observe the effects of the molecular weight of amylose on the structure and in vitro digestive properties of RS5. Gel permeation chromatography revealed that the peak average molecular weight (Mp) values of high-amylose cornstarch NF-CGK (CGK), high-amylose cornstarch obtained via cornstarch via autoclave (high temperature and high pressure)-cooling combined pullulanase enzymatic hydrolysis (CTE), and high-amylose cornstarch NF-G370 (HCK) were 21,282, 171,537, and 188,084 before fatty acid complexation, respectively. Additionally, their weight average molecular weight (Mw) values of 32,429, 327,344, and 410,610 and hydrolysis rates of 58.12 %, 86.77 %, and 64.58 %, respectively. The hydrolysis rate of low-Mw amylose (GCK) complexes with fatty acids was lower than that of HCK and CTE starch-lipid complexes. However, HCK and CTE having similar molecular weights, there was no significant difference in the hydrolysis rate of starch-lipid complexes. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and complexing index analyses confirmed the formation of these complexes. This study proposed the mechanism of RS5 formation and provided guidance for its future development.
Subject(s)
Amylose , Lauric Acids , Molecular Weight , Amylose/chemistry , Lauric Acids/chemistry , Hydrolysis , Starch/chemistry , Starch/metabolism , Digestion , Stearic Acids/chemistry , Lipids/chemistry , CaprylatesABSTRACT
Herein, the surface-enhanced Raman scattering (SERS) platform was combined with an azo coupling reaction and an aluminum alloy covered with a hydrophobic layer of praseodymium oxide and stearic acid complexes for the detection of histamine. The praseodymium oxide on aluminum alloy was successfully synthesized by the rare-earth-salt-solution boiling bath method and modified by stearic acid. Its surface exhibits a water contact angle (WCA) of 125.0°. Through the azo derivatization reaction with 3-amino-5-mercapto-1,2,4-triazole (AMTA) diazonium salts, histamine can be converted into the derivatization product with higher Raman activity. The mixture of the derivatization product and ß-cyclodextrin-modified Ag nanoparticles (ß-CD-AgNPs) were dropped onto the surface of an aluminum alloy covered with a hydrophobic layer of praseodymium oxide and stearic acid complexes, and dried for SERS measurement. The intensity ratio between the SERS peaks at 1246 cm-1 and 1104 cm-1 (I1246/I1104) of the derivatization product was used for the quantification of histamine. Under the selected conditions, the limit of detection (LOD) and the limit of quantification (LOQ) for this method were 7.2 nM (S/N = 3) and 24 nM (S/N = 10), respectively. The relative standard deviation (RSD) of this method for the determination of 1 µM histamine was 6.1 % (n = 20). The method was also successfully used for the determination of histamine in fish samples with recoveries ranging from 92 % to 111 %. The present method is simple, sensitive, reliable, and may provide a new approach for preparing the composite hydrophobic layer that can enhance SERS signals through hydrophobic condensation effect. Meanwhile, it may have a promising future in the determination of small molecular compounds containing an imidazole ring.
Subject(s)
Histamine , Hydrophobic and Hydrophilic Interactions , Metal Nanoparticles , Silver , Spectrum Analysis, Raman , Spectrum Analysis, Raman/methods , Histamine/analysis , Histamine/chemistry , Silver/chemistry , Metal Nanoparticles/chemistry , Limit of Detection , Azo Compounds/chemistry , Stearic Acids/chemistry , Animals , Fishes , Surface PropertiesABSTRACT
This study aimed to explore the effects of various lipids on the structure, cooking quality, and in vitro starch digestibility of extruded buckwheat noodles (EBNs) with and without 20% high-amylose corn starch (HACS). Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction revealed that lauric acid bound more strongly to starch than did stearic acid and oleic acid, and the binding capacity of fatty acids with starch was stronger than that of glycerides. The presence of HACS during extrusion facilitated increased formation of starch-lipid complexes. Evaluations of cooking quality and digestion characteristics showed that EBNs containing 20% HACS and 0.5% glycerol monooleate demonstrated the lowest cooking loss (7.28%), and that with 20% HACS and 0.5% oleic acid displayed the lowest predicted glycemic index (pGI) (63.54) and highest resistant starch (RS) content (51.64%). However, excessive starch-lipid complexes were detrimental to EBNs cooking quality and the resistance of starch to digestive enzymes because of the damage to the continuity of the starch gel network. This study establishes a fundamental basis for the development of EBNs with superior cooking quality and a relatively lower GI.
Subject(s)
Cooking , Digestion , Fagopyrum , Fatty Acids , Starch , Fagopyrum/chemistry , Fatty Acids/chemistry , Starch/chemistry , Glycerides/chemistry , Glycemic Index , Spectroscopy, Fourier Transform Infrared , Amylose/chemistry , X-Ray Diffraction , Calorimetry, Differential Scanning , Stearic Acids/chemistry , Oleic Acid/chemistry , Lauric Acids/chemistryABSTRACT
Notwithstanding the several investigations of the hydroxy fatty acids (hFAs)' physiological functions, studies focusing on their anti-obesity effects are limited. This study investigated the anti-obesity effects of 4 hFAs-10-hydroxy stearic acid (10-hSA), 12-hydroxy stearic acid (12-hSA), 9,12-hydroxy stearic acid (9,12-dhSA), and 12-hydroxy oleic acid (12-hOA)-on the 3T3-L1 cells. All hFAs suppressed lipid accumulation, with 10-hSA and 12-hOA exhibiting the strongest suppression, followed by 12-hSA and 9,12-hSA. This trend was similar to that observed for the glycerol-3-phosphate dehydrogenase (GPDH) activity level. Contrastingly, only 9,12-dhSA suppressed cell viability. The mRNA levels of HK1 and Aldoa were markedly suppressed by 10-hSA and 12-hSA compared to the control. Additionally, mRNA expression of Gyk was considerably suppressed by 12-hSA. Thus, all hFAs suppressed lipid accumulation by suppressing GPDH activity, although their molecular mechanisms were different. These findings will aid the application of hFAs in the food and medical industries.
Subject(s)
3T3-L1 Cells , Glycerolphosphate Dehydrogenase , Lipid Metabolism , RNA, Messenger , Animals , Mice , Lipid Metabolism/drug effects , Glycerolphosphate Dehydrogenase/metabolism , Glycerolphosphate Dehydrogenase/genetics , RNA, Messenger/genetics , RNA, Messenger/metabolism , Cell Survival/drug effects , Stearic Acids/pharmacology , Fatty Acids/metabolism , Oleic Acids/pharmacologyABSTRACT
Extensive evidence supports the connection between obesity-induced inflammation and the heightened expression of IL-6 adipose tissues. However, the mechanism underlying the IL-6 exacerbation in the adipose tissue remains unclear. There is general agreement that TNF-α and stearate concentrations are mildly elevated in adipose tissue in the state of obesity. We hypothesize that TNF-α and stearate co-treatment induce the increased expression of IL-6 in mouse adipocytes. We therefore aimed to determine IL-6 gene expression and protein production by TNF-α/stearate treated adipocytes and investigated the mechanism involved. To test our hypothesis, 3T3-L1 mouse preadipocytes were treated with TNF-α, stearate, or TNF-α/stearate. IL-6 gene expression was assessed by quantitative real-time qPCR. IL-6 protein production secreted in the cell culture media was determined by ELISA. Acetylation of histone was analyzed by Western blotting. Il6 region-associated histone H3 lysine 9/18 acetylation (H3K9/18Ac) was determined by ChIP-qPCR. 3T3-L1 mouse preadipocytes were co-challenged with TNF-α and stearate for 24 h, which led to significantly increased IL-6 gene expression (81 ± 2.1 Fold) compared to controls stimulated with either TNF-α (38 ± 0.5 Fold; p = 0.002) or stearate (56 ± 2.0 Fold; p = 0.013). As expected, co-treatment of adipocytes with TNF-α and stearate significantly increased protein production (338 ± 11 pg/mL) compared to controls stimulated with either TNF-α (28 ± 0.60 pg/mL; p = 0.001) or stearate (53 ± 0.20 pg/mL, p = 0.0015). Inhibition of histone acetyltransferases (HATs) with anacardic acid or curcumin significantly reduced the IL-6 gene expression and protein production by adipocytes. Conversely, TSA-induced acetylation substituted the stimulatory effect of TNF-α or stearate in their synergistic interaction for driving IL-6 gene expression and protein production. Mechanistically, TNF-α/stearate co-stimulation increased the promoter-associated histone H3 lysine 9/18 acetylation (H3K9/18Ac), rendering a transcriptionally permissive state that favored IL-6 expression at the transcriptional and translational levels. Our data represent a TNF-α/stearate cooperativity model driving IL-6 expression in 3T3-L1 cells via the H3K9/18Ac-dependent mechanism, with implications for adipose IL-6 exacerbations in obesity.
Subject(s)
3T3-L1 Cells , Adipocytes , Histones , Interleukin-6 , Tumor Necrosis Factor-alpha , Animals , Mice , Acetylation , Adipocytes/metabolism , Adipocytes/drug effects , Gene Expression Regulation/drug effects , Histones/metabolism , Interleukin-6/metabolism , Interleukin-6/genetics , Stearic Acids/pharmacology , Stearic Acids/metabolism , Tumor Necrosis Factor-alpha/metabolism , Tumor Necrosis Factor-alpha/pharmacologyABSTRACT
In order to introduce a cost-effective strategy method for commercial scale dry granulation at the early clinical stage of drug product development, we developed dry granulation process using formulation without API, fitted and optimized the process parameters adopted Design of Experiment (DOE). Then, the process parameters were confirmed using one formulation containing active pharmaceutical ingredient (API). The results showed that the roller pressure had significant effect on particle ratio (retained up to #60 mesh screen), bulk density and tapped density. The roller gap had significant influence on particle ratio and specific energy. The particle ratio was significantly affected by the mill speed (second level). The tabletability of the powder decreased after dry granulation. The effect of magnesium stearate on the tabletability was significant. In the process validation study, the properties of the prepared granules met the requirements for each response studied in the DOE. The prepared tablets showed higher tensile strength, good content uniformity of filled capsules, and the dissolution profiles of which were consistent with that of clinical products. This drug product process development and research strategies could be used as a preliminary experiment for the dry granulation process in the early clinical stage.
Subject(s)
Tablets , Tablets/chemistry , Particle Size , Drug Compounding , Powders/chemistry , Stearic Acids/chemistry , Tensile Strength , Excipients/chemistry , SolubilityABSTRACT
The compendial USPã701ã disintegration test method offers a crucial pass/fail assessment for immediate release tablet disintegration. However, its single end-point approach provides limited insight into underlying mechanisms. This study introduces a novel calorimetric approach, aimed at providing comprehensive process profiles beyond binary outcomes. We developed a novel disintegration reaction calorimeter to monitor the heat release throughout the disintegration process and successfully obtained enthalpy change profiles of placebo tablets with various porosities. The formulation comprised microcrystalline cellulose (MCC), anhydrous lactose, croscarmellose sodium (CCS), and magnesium stearate (MgSt). An abrupt temperature rise was observed after introducing the disintegration medium to tablets, and the relationship between the heat rise time and the tablet's porosity was investigated. The calorimeter's sensitivity was sufficient to discern distinct heat changes among individual tablets, and the analysis revealed a direct correlation between the two. Higher porosity corresponded to shorter heat rise time, indicating faster disintegration rates. Additionally, the analysis identified a concurrent endothermic process alongside the anticipated exothermic phenomenon, potentially associated with the dissolution of anhydrous lactose. Since lactose is the only soluble excipient within the blend composition, the endothermic process can be attributed to the absorption of heat as lactose molecules dissolve in water. The findings from this study underscore the potential of utilising calorimetric methods to quantify the wettability of complex compounds and, ultimately, optimise tablet formulations.
Subject(s)
Calorimetry , Cellulose , Excipients , Hot Temperature , Lactose , Stearic Acids , Tablets , Lactose/chemistry , Cellulose/chemistry , Excipients/chemistry , Porosity , Stearic Acids/chemistry , Calorimetry/methods , Solubility , Carboxymethylcellulose Sodium/chemistry , Chemistry, Pharmaceutical/methods , Drug Liberation , Drug Compounding/methodsABSTRACT
Limited attempts have been made previously to develop high-loading CBD inhalable powders, which are essential for high dose delivery. Therefore, this study aimed to develop and characterise inhalable powders with ≥ 95 % w/w CBD by wet ball milling. The effects of magnesium stearate (2 % and 5 %) and inhaler resistance (low-resistance and high-resistance RS01 inhalers) on aerosol performance were also compared. Wet ball milling produced CBD powders with > 50 % production yield. The milled particles showed irregular shapes. The powders were crystalline with minimal amorphous content, low residual solvent level (<1%), and low moisture sorption (<4%). Magnesium stearate improved both the emitted and fine particle fractions. The aerodynamic particle size distribution of the formulations differed between the low-resistance and high-resistance RS01 inhalers. The latter decreased throat deposition but increased inhaler retention. The dissolution profiles showed that all three formulations released CBD steadily and plateaued at 30 min. The best scenario was CBD with 5 % magnesium stearate dispersed from the high resistance RS01 inhaler, showing the highest FPF with the lowest throat deposition. This combination may be tested in vivo in the future to investigate its pharmacokinetic profile.
Subject(s)
Cannabidiol , Particle Size , Powders , Stearic Acids , Administration, Inhalation , Stearic Acids/chemistry , Cannabidiol/administration & dosage , Cannabidiol/chemistry , Cannabidiol/pharmacokinetics , Aerosols , Dry Powder Inhalers , Excipients/chemistry , Chemistry, Pharmaceutical/methods , Drug Liberation , Nebulizers and Vaporizers , Drug Compounding/methods , SolubilityABSTRACT
Magnesium alloy is currently regarded as the most favourable biodegradable metal; however, obstacles remain to be overcome in terms of managing its corrosion and ensuring its biocompatibility. In this study, a metal-organic complex comprising Ca ions incorporated in tannic acid (TA) was prepared and used to coat magnesium alloy by chemical conversion and dipping processes, followed by modification with stearic acid (SA). This metal-organic complex coating was demonstrated to be homogeneous and compact, and it significantly improved the electrochemical corrosion resistance and long-term degradation behaviour of the coated samples. Consequently, the well-controlled release of Mg and Ca ions, as well as the osteo-compatible TA and SA molecules, promoted the proliferation of osteoblast cells. This metal-organic complex coating offers a promising modifying strategy for magnesium-based orthopaedic implants.
Subject(s)
Alloys , Coated Materials, Biocompatible , Magnesium , Magnesium/chemistry , Alloys/chemistry , Alloys/pharmacology , Corrosion , Coated Materials, Biocompatible/chemistry , Coated Materials, Biocompatible/pharmacology , Materials Testing , Tannins/chemistry , Tannins/pharmacology , Cell Proliferation/drug effects , Surface Properties , Osteoblasts/drug effects , Osteoblasts/cytology , Absorbable Implants , Humans , Stearic Acids/chemistry , Animals , Calcium/chemistry , Calcium/metabolism , Cell LineABSTRACT
AIM: Fatty acid esters of hydroxy fatty acids (FAHFA) are a class of bioactive lipids with anti-inflammatory, antidiabetic and cardioprotective properties. FAHFA hydrolysis into its fatty acid (FA) and hydroxy fatty acid (HFA) constituents can affect the bioavailability of FAHFA and its subsequent biological effects. We aimed to investigate FAHFA levels and FAHFA hydrolysis activity in children with or without obesity, and in adults with or without coronary artery disease (CAD). MATERIALS AND METHODS: Our study cohort included 20 children without obesity, 40 children with obesity, 10 adults without CAD and 28 adults with CAD. We quantitated plasma levels of four families of FAHFA [palmitic acid hydroxy stearic acid (PAHSA), palmitoleic acid hydroxy stearic acid (POHSA), oleic acid hydroxy stearic acid (OAHSA), stearic acid hydroxy stearic acid] and their corresponding FA and HFA constituents using liquid chromatography-tandem mass spectrometry analysis. Surrogate FAHFA hydrolysis activity was estimated as the FA/FAHFA or HFA/FAHFA ratio. RESULTS: Children with obesity had lower plasma PAHSA (p = .001), OAHSA (p = .006) and total FAHFA (p = .011) levels, and higher surrogate FAHFA hydrolysis activity represented by PA/PAHSA (p = .040) and HSA/OAHSA (p = .025) compared with children without obesity. Adults with CAD and a history of myocardial infarction (MI) had lower POHSA levels (p = .026) and higher PA/PAHSA (p = .041), POA/POHSA (p = .003) and HSA/POHSA (p = .038) compared with those without MI. CONCLUSION: Altered FAHFA metabolism is associated with obesity and MI, and inhibition of FAHFA hydrolysis should be studied further as a possible therapeutic strategy in obesity and MI.
Subject(s)
Coronary Artery Disease , Fatty Acids , Humans , Male , Female , Child , Coronary Artery Disease/blood , Adult , Hydrolysis , Fatty Acids/blood , Fatty Acids/metabolism , Middle Aged , Adolescent , Stearic Acids/blood , Stearic Acids/metabolism , Pediatric Obesity/blood , Pediatric Obesity/complications , Pediatric Obesity/metabolism , Esters/blood , Fatty Acids, Monounsaturated/blood , Obesity/blood , Obesity/complications , Obesity/metabolism , Cohort StudiesABSTRACT
Transport of oral nanocarriers across the GI epithelium necessitates transport across hydrophilic mucus layer and the hydrophobic epithelium. Based on hydrophobic-hydrophilic balance, Curcumin-Lipomer (lipid-polymer hybrid nanoparticles) comprising hydrophobic stearic acid and hydrophilic Gantrez™ AN 119 (Gantrez) were developed, by a radical in-situ approach, to successfully traverse both barriers. A monophasic preconcentrate (Cur-Pre) comprising Cur (Curcumin), stearic acid, Gantrez and stabilizers, prepared by simple solution, was added to an aqueous phase to instantaneously generate Curcumin-Lipomer (Cur-Lipo) of nanosize and high entrapment efficiency (EE). Cur-Lipo size and EE was optimized by Box-Behnken Design. Cur-Lipomers of varying hydrophobic-hydrophilic property obtained by varying the stearic acid: Gantrez ratio exhibited size in the range 200-400 nm, EE > 95% and spherical morphology as seen in the TEM. A decrease in contact angle and in mucus interaction, evident with increase in Gantrez concentration, indicated an inverse corelation with hydrophilicity, while a linear corelation was observed for mucopenetration and hydrophilicity. Cur-SLN (solid lipid nanoparticles) which served as the hydrophobic reference revealed contact angle > 90°, maximum interaction with mucus and minimal mucopenetration. The ex-vivo permeation study through chicken ileum, revealed maximum permeation with Cur-Lipo1 and comparable and significantly lower permeation of Cur-Lipo1-D and Cur-SLN proposing the importance of balancing the hydrophobic-hydrophilic property of the nanoparticles. A 1.78-fold enhancement in flux of hydrophobic Cur-SLN, with no significant change in permeation of the hydrophilic Cur-Lipomers (p > 0.05) following stripping off the mucosal layer was observed. This reiterated the significance of hydrophobic-hydrophilic balance as a promising strategy to design nanoformulations with superior permeation across the GI barrier.
Subject(s)
Curcumin , Drug Carriers , Hydrophobic and Hydrophilic Interactions , Intestinal Mucosa , Nanoparticles , Stearic Acids , Nanoparticles/chemistry , Administration, Oral , Animals , Stearic Acids/chemistry , Curcumin/administration & dosage , Curcumin/pharmacokinetics , Curcumin/chemistry , Intestinal Mucosa/metabolism , Drug Carriers/chemistry , Particle Size , Lipids/chemistry , Polymers/chemistry , Biological Transport/physiology , Polyvinyls/chemistryABSTRACT
In this study, five C18 fatty acids (FA) with different numbers of double bonds and configurations including stearic acid (SA), oleic acid (OA), elaidic acid (EA), linoleic acid (LA), and α-linolenic acid (ALA), were selected to prepare highland barely starch (HBS)-FA complexes to modulate digestibility and elaborate the underlying mechanism. The results showed that HBS-SA had the highest complex index (34.18 %), relative crystallinity (17.62 %) and single helix content (25.78 %). Furthermore, the HBS-C18 FA complexes were formed by EA (C18 FA with monounsaturated bonds) that had the highest R1047/1022 (1.0509) and lowest full width at half-maximum (FWHM, 20.85), suggesting good short-range ordered structure. Moreover, all C18 FAs could form two kinds of V-type complexes with HBS, which can be confirmed by the results of CLSM and DSC measurements, and all of them showed significantly lower digestibility. HBS-EA possessed the highest resistant starch content (20.17 %), while HBS-SA had the highest slowly digestible starch content (26.61 %). In addition, the inhibition of HBS retrogradation by fatty acid addition was further proven, where HBS-SA gel firmness (37.80 g) and aging enthalpy value were the lowest, indicating the most effective. Overall, compounding with fatty acids, especially SA, could be used as a novel way to make functional foods based on HBS.
Subject(s)
Digestion , Fatty Acids , Hordeum , Oleic Acid , Starch , Starch/chemistry , Fatty Acids/analysis , Fatty Acids/chemistry , Hordeum/chemistry , Oleic Acid/chemistry , Stearic Acids/chemistry , Linoleic Acid/chemistry , alpha-Linolenic Acid/chemistry , Oleic AcidsABSTRACT
Lubricants are essential for most tablet formulations as they assist powder flow, prevent adhesion to tableting tools and facilitate tablet ejection. Magnesium stearate (MgSt) is an effective lubricant but may compromise tablet strength and disintegratability. In the design of orodispersible tablets, tablet strength and disintegratability are critical attributes of the dosage form. Hence, this study aimed to conduct an in-depth comparative study of MgSt with alternative lubricants, namely sodium lauryl sulphate (SLS), stearic acid (SA) and hydrogenated castor oil (HCO), for their effects on the tableting process as well as tablet properties. Powder blends were prepared with lactose, sodium starch glycolate or crospovidone as the disintegrant, and a lubricant at different concentrations. Angle of repose was determined for the mixtures. Comparative evaluation was carried out based on the ejection force, tensile strength, liquid penetration and disintegratability of the tablets produced. As the lubricant concentration increased, powder flow and tablet ejection improved. The lubrication efficiency generally decreased as follows: MgSt > HCO > SA > SLS. Despite its superior lubrication efficacy, MgSt is the only lubricant of four evaluated that reduced tablet tensile strength. Tablet disintegration time was strongly determined by tensile strength and liquid penetration, which were in turn affected by the lubricant type and concentration. All the above factors should be taken into consideration when deciding the type and concentration of lubricant for an orodispersible tablet formulation.
Subject(s)
Excipients , Lubricants , Stearic Acids , Tablets , Tensile Strength , Lubricants/chemistry , Stearic Acids/chemistry , Excipients/chemistry , Drug Compounding/methods , Powders/chemistry , Sodium Dodecyl Sulfate/chemistry , Castor Oil/chemistry , Povidone/chemistry , Starch/chemistry , Starch/analogs & derivatives , Lactose/chemistry , Administration, Oral , Solubility , Chemistry, Pharmaceutical/methodsABSTRACT
Constipation is a major gastrointestinal (GI) symptom worldwide, with diverse causes of formation, and requires effective and safe therapeutic measures. In the present study, we used loperamide hydrochloride to establish a constipation model and assessed the effect of Bifidobacterium on constipation and its possible mechanism of relief. The results showed that B. longum S3 exerted a constipation-relieving effect primarily by improving the gut microbiota, enriching genera including Lactobacillus, Alistipes, and Ruminococcaceae UCG-007, and decreasing the bacteria Lachnospiraceae NK4B4 group. These changes may thereby increase acetic acid and stearic acid (C18:0) levels, which significantly increase the expression levels of ZO-1 and MUC-2, repair intestinal barrier damage and reduce inflammation (IL-6). Furthermore, it also inhibited oxidative stress levels (SOD and CAT), decreased the expression of water channel proteins (AQP4 and AQP8), significantly elevated the Gas, 5-HT, PGE2, and Ach levels, and reduced nNOS and VIP levels to improve the intestinal luminal transit time and fecal water content. Collectively, these changes resulted in the alleviation of constipation.