The renewed tin-weighting treatment as sustainable and durable flame-retardant approach for protein silk fabric.

The facile development of a sustainable and durable flame-retardant approach for protein silk is of interest. Inspired by silk tin-weighting technology, this study developed a novel and sustainable in-situ deposition strategy based on biomass phytic acid to impart durable flame-retardant performance to silk fabrics. The chemical structure of insoluble chelating precipitation, and the surface morphology, thermal stability, combustion behavior, flame-retardant capacity, laundering resistance, and flame-retardant mode of action of the tin-weighting silk samples, were explored. The Sn-, P-, Si-containing insoluble chelating precipitation formed within the fiber interior and combined with silk fibers through electrostatic attraction and metal salt chelation. As a result, the tin-weighting silk displayed excellent self-extinguishing capacity, with the damaged length reduced to 9.2 cm and the LOI increased to 31.6 %; it also achieved self-extinguishing after 30 washing cycles, demonstrating high flame-retardant efficacy and laundering resistance. Moreover, the tin-weighting silk also showed the obvious suppression in smoke and heat generation by 55.6 % and 35.7 %, respectively. The synergistic charring action of phosphate groups, tin metal salts, and silicates was beneficial for enhancing the fire safety of silk. The tin-weighting treatment also displayed a minor impact on mechanical performance of silk fabrics.

Environmentally stable and rapidly polymerized tin-tannin catalytic system hydroxyethyl cellulose hydrogel for wireless wearable sensing.

In recent years, flexible sensors constructed mainly from hydrogels have played an indispensable role in several fields. However, the traditional hydrogel preparation process involves complex and time-consuming steps and the freezing or volatilization of water in the water gel in extreme environments greatly limits the further use of the sensor. Therefore, an ionic conductive hydrogel (SnHTD) was designed, which was composed of tannic acid (TA), metal ions Sn2+, hydroxyethyl cellulose (HEC), and acrylamide (AM) in a deep eutectic solvent (DES) and water binary solvent. It is worth noting that the gel time is shortened to less than 3 min by introducing the Sn-TA redox system. The addition of DES makes the hydrogel have a wide temperature tolerance range (-20 to 60 °C) and the ability to store for a long time (30 days). The introduction of HEC increased the tensile stress of hydrogel from 140.17 kPa to 219.89 kPa. Additionally, the hydrogel also has high conductivity, repeatable adhesion and UV shielding properties. In general, this research opens up a new way for room temperature polymerization of environmentally resistant hydrogel materials and effectively meets the growing demand for wireless wearable sensing.

Comparison of Pb-based and Sn-based perovskite solar cells using SCAPS simulation: optimal efficiency of eco-friendly CsSnI3 devices.

In this study, we employed the one-dimensional solar cell capacitance simulator (SCAPS-1D) software to optimize the performance of Pb-based and Sn-based (Pb-free) all-inorganic perovskites (AIPs) and organic-inorganic perovskites (OIPs) in perovskite solar cell (PSC) structures. Due to the higher stability of AIPs, the performance of PSCs incorporating Cs-based perovskites was compared with that of FA-based perovskites, which are more stable than their MA-based counterparts. The impact of AIPs such as CsPbCl3, CsPbBr3, CsPbI3, CsSnCl3, CsSnBr3, and CsSnI3, as well as including FAPbCl3, FAPbBr3, FAPbI3, FASnCl3, FASnBr3, and FASnI3, was investigated. SnO2 and Cu2O were selected as an inorganic electron transport layer (ETL) and a hole transport layer (HTL), respectively. CsSnBr3, CsSnI3, FASnCl3, and FASnBr3 exhibited higher efficiency compared to their Pb-based counterparts. Additionally, most Cs-based perovskites, excluding CsPbI3, demonstrated better performance relative to their FA counterparts. CsSnI3 AIP device also shows the highest short circuit current density (JSC) of 32.85 mA/cm2, the best power conversion efficiency (PCE) of 16.00%, and the least recombination at the SnO2/CsSnI3 interface. The thickness, doping, and total defect density of CsSnI3 PSC have been systematically investigated and optimized to obtain the PCE of 17.36%. These findings highlight the potential of CsSnI3 PSCs as efficient and environmentally friendly PSCs.

Experimental toothpastes containing ß-TCP nanoparticles functionalized with fluoride and tin to prevent Erosive Tooth Wear.

OBJECTIVES: The present study aimed to synthesize toothpastes containing Beta- TriCalcium Phosphate (ß-TCP) nanoparticles, functionalized with fluoride and tin, and test their ability to reduce erosive tooth wear (ETW). METHODS: Toothpastes were synthesized with the following active ingredients: 1100 ppm of fluoride (as sodium fluoride, F-), 3500 ppm of tin (as stannous chloride, Sn2+), and 800 ppm of ß-TCP (Sizes a - 20 nm; and b - 100 nm). Enamel specimens were randomly assigned into the following groups (n = 10): 1. Commercial toothpaste; 2. Placebo; 3 F-; 4. F- + ß-TCPa; 5. F- + ß-TCPb; 6. F- + Sn2+; 7. F- + Sn2+ + ß-TCPa and 8. F- + Sn2+ + ß-TCPb. Specimens were subjected to erosion-abrasion cycling. Surface loss (in µm) was measured by optical profilometry. Toothpastes pH and available F- were also assessed. RESULTS: Brushing with placebo toothpaste resulted in higher surface loss than brushing with F- (p = 0.005) and F- + ß-TCPb (p = 0.007); however, there was no difference between F- and F- + ß-TCPb (p = 1.00). Commercial toothpaste showed no difference from Placebo (p = 0.279). The groups F-, F- + ß-TCPa, F- + ß-TCPb, F- + Sn2+, F- + Sn2+ + ß-TCPa and F- + Sn2+ + ß-TCPb were not different from the commercial toothpaste (p > 0.05). Overall, the addition of ß-TCP reduced the amount of available fluoride in the experimental toothpastes. The pH of toothpastes ranged from 4.97 to 6.49. CONCLUSIONS: Although toothpaste containing ß-TCP nanoparticles protected enamel against dental erosion-abrasion, this effect was not superior to the standard fluoride toothpaste (commercial). In addition, the functionalization of ß-TCP nanoparticles with fluoride and tin did not enhance their protective effect. CLINICAL SIGNIFICANCE: Although ß-TCP nanoparticles have some potential to control Erosive Tooth Wear, their incorporation into an experimental toothpaste appears to have a protective effect that is similar to a commercial fluoride toothpaste.

IrSn Bimetallic Clusters Confined in MFI Zeolites for CO Selective Catalytic Reduction of NOx in the Presence of Excess O2.

We developed a simple strategy for preparing IrSn bimetallic clusters encapsulated in pure silicon zeolites via a one-pot hydrothermal synthesis by using diethylamine as a stabilizing agent. A series of investigations verified that metal species have been confined successfully in the inner of MFI zeolites. IrSn bimetallic cluster catalysts were efficient for the CO selective catalytic reduction of NOx in the presence of excess O2. Furthermore, the 13CO temperature-programmed surface reaction results demonstrated that NO2 and N2O could form when most of the CO was transformed into CO2 and that Sn modification could passivate CO oxidation on the IrSn bimetallic clusters, leading to more reductants that could be used for NOx reduction at high temperatures. Furthermore, SO2 can also influence the NOx conversion by inhibiting the oxidation of CO. This study provides a new strategy for preparing efficient environmental catalysts with a high dispersion of metal species.

Intraindividual Comparison of Dose Reduction and Coronary Calcium Scoring Accuracy Using Kilovolt-independent and Tin Filtration CT Protocols.

Purpose To investigate the ability of kilovolt-independent (hereafter, kV-independent) and tin filter spectral shaping to accurately quantify the coronary artery calcium score (CACS) and radiation dose reductions compared with the standard 120-kV CT protocol. Materials and Methods This prospective, blinded reader study included 201 participants (mean age, 60 years ± 9.8 [SD]; 119 female, 82 male) who underwent standard 120-kV CT and additional kV-independent and tin filter research CT scans from October 2020 to July 2021. Scans were reconstructed using a Qr36f kernel for standard scans and an Sa36f kernel for research scans simulating artificial 120-kV images. CACS, risk categorization, and radiation doses were compared by analyzing data with analysis of variance, Kruskal-Wallis test, Mann-Whitney test, Bland-Altman analysis, Pearson correlations, and κ analysis for agreement. Results There was no evidence of differences in CACS across standard 120-kV, kV-independent, and tin filter scans, with median CACS values of 1 (IQR, 0-48), 0.6 (IQR, 0-58), and 0 (IQR, 0-51), respectively (P = .85). Compared with standard 120-kV scans, kV-independent and tin filter scans showed excellent correlation in CACS values (r = 0.993 and r = 0.999, respectively), with high agreement in CACS risk categorization (κ = 0.95 and κ = 0.93, respectively). Standard 120-kV scans had a mean radiation dose of 2.09 mSv ± 0.84, while kV-independent and tin filter scans reduced it to 1.21 mSv ± 0.85 and 0.26 mSv ± 0.11, cutting doses by 42% and 87%, respectively (P < .001). Conclusion The kV-independent and tin filter research CT acquisition techniques showed excellent agreement and high accuracy in CACS estimation compared with standard 120-kV scans, with large reductions in radiation dose. Keywords: CT, Cardiac, Coronary Arteries, Radiation Safety, Coronary Artery Calcium Score, Radiation Dose Reduction, Low-Dose CT Scan, Tin Filter, kV-Independent Supplemental material is available for this article. © RSNA, 2024.

Comparative investigation of tellurium-doped transition metal nanoparticles (Zn, Sn, Mn): Unveiling their superior photocatalytic and antibacterial activity.

In this study, tellurium-doped and undoped metal oxide nanoparticles (NPs) (ZnO, Mn3O4, SnO2) are compared, and a practical method for their synthesis is presented. Nanocomposites were created using the coprecipitation process, and comparisons between the three material categories under study were made using a range of characterization methods. The produced materials were subjected to structural, morphological, elemental composition, and functional group analyses using XRD, FESEM in combination with EDS, and FTIR. The optical characteristics in terms of cutoff wavelength were evaluated using UV-visible spectroscopy. Catalyzing the breakdown of methylene blue (MB) dye, the isolated nanocomposites demonstrated very consistent behavior when utilized as catalysts. Regarding both doped and undoped ZnO NPs, the maximum percentage of degradation was found to be 98% when exposed to solar Escherichia coli and Staphylococcus aureus, which stand for gram-positive and gram-negative bacteria, respectively, and were chosen as model strains for both groups using the disk diffusion technique in the context of in vitro antibacterial testing. Doped and undoped ZnO NPs exhibited greater antibacterial efficacy, with significant inhibition zones measuring 31.5 and 37.8 mm, compared with other metal oxide NPs.

Solution-Processed, Surface-Engineered, Polycrystalline CdSe-SnSe Exhibiting Low Thermal Conductivity.

In recent years, solution processes have gained considerable traction as a cost-effective and scalable method to produce high-performance thermoelectric materials. The process entails a series of critical steps: synthesis, purification, thermal treatments, and consolidation, each playing a pivotal role in determining performance, stability, and reproducibility. We have noticed a need for more comprehensive details for each of the described steps in most published works. Recognizing the significance of detailed synthetic protocols, we describe here the approach used to synthesize and characterize one of the highest-performing polycrystalline p-type SnSe. In particular, we report the synthesis of SnSe particles in water and the subsequent surface treatment with CdSe molecular complexes that yields CdSe-SnSe nanocomposites upon consolidation. Moreover, the surface treatment inhibits grain growth through Zenner pinning of secondary phase CdSe nanoparticles and enhances defect formation at different length scales. The enhanced complexity in the CdSe-SnSe nanocomposite microstructure with respect to SnSe promotes phonon scattering and thereby significantly reduces the thermal conductivity. Such surface engineering provides opportunities in solution processing for introducing and controlling defects, making it possible to optimize the transport properties and attain a high thermoelectric figure of merit.

Blue-Light-Activated Water-Soluble Sn(IV)-Porphyrins for Antibacterial Photodynamic Therapy (aPDT) against Drug-Resistant Bacterial Pathogens.

Antimicrobial resistance has emerged as a global threat to the treatment of infectious diseases. Antibacterial photodynamic therapy (aPDT) is a promising alternative approach and is highly suitable for the treatment of cutaneous bacterial infections through topical applications. aPDT relies on light-responsive compounds called photosensitizer (PS) dyes, which generate reactive oxygen species (ROS) when induced by light, thereby killing bacterial cells. Despite several previous studies in this area, the molecular details of targeting and cell death mediated by PS dyes are poorly understood. In this study, we further investigate the antibacterial properties of two water-soluble Sn(IV) tetrapyridylporphyrins that were quaternized with methyl and hexyl groups (1 and 2). In this follow-up study, we demonstrate that Sn(IV)-porphyrins can be photoexcited by blue light (a 427 nm LED) and exhibit various levels of bactericidal activity against both Gram-(+) and Gram-(-) strains of bacteria. Using localization studies through fluorescence microscopy, we show that 2 targets the bacterial membrane more effectively than 1 and exhibits comparatively higher aPDT activity. Using multiple fluorescence reporters, we demonstrate that photoactivation of 1 and 2 results in extensive collateral damage to the bacterial cells including DNA cleavage, membrane damage, and delocalization of central systems necessary for bacterial growth and division. In summary, this investigation provides deep insights into the mechanism of bacterial killing mediated by the Sn(IV)-porphyrins. Moreover, our approach offers a new method for evaluating the activity of PS, which may inspire the discovery of new PS with enhanced aPDT activity.

Optimization of synergistic capturing platinum group metals by Fe-Sn and its mechanism.

Platinum group metals (PGMs) are strategic metals. Auto-exhaust catalysts are their main application fields. The recovery of PGMs from spent auto-exhaust catalysts has remarkable economic value and strategic significance. Aiming at the problems of ferrosilicon generation for Fe capturing and subsequent oxygen blowing to remove iron with high energy consumption and heat release, a technology of Fe-Sn synergistic capturing PGMs was proposed. Taking full the advantage of the lower melting point of Fe-Sn alloy (<1200 °C) and its unique affinity for PGMs, the PGMs were captured at approximate 1400 °C with Fe-Sn as the collector. In experiment, 500 g of spent auto-exhaust catalysts were employed to minimize error and approximate industrial production. The mechanism of Fe-Sn synergistic capturing PGMs was elucidated. The generation of Fe-Sn-PGMs alloy lowered the activity of [PGMs] in the system, accelerated the reduction of the PGMs oxides and promoted the alloying of [PGMs]. Therefore, Fe-Sn synergistic capturing PGMs was realized. The inability of Si to enter the alloy phase was confirmed by theoretical calculations, avoiding the generation of ferrosilicon. The effects of basicity, CaF2, m(Fe)/m(Sn) and the amount of collector on capturing PGMs were optimized. Under the optimized conditions (basicity R = 1.1, spent auto-exhaust catalysts 70 wt%, CaO 30 wt%, B2O3 10 wt%, CaF2 7 wt%, m(Fe)/m(Sn) = 1/1 and the collector 15 wt%), the content of PGMs in the slag phase was 2.46 g/t. It is feasible to remove Fe and Sn by oxidation to achieve the purpose of PGMs enrichment. This technology offers guidance on the safe, environmentally sound, and efficient disposal of spent auto-exhaust catalysts, promoting the sustainable development of PGMs.

Impact of Sn-doping on the optoelectronic properties of zinc oxide crystal: DFT approach.

This study aims to provide a concise overview of the behavior exhibited by Sn-doped ZnO crystals using a computational technique known as density functional theory (DFT). The influence of Sn doping on the electronic, structural, and optical properties of ZnO have been explored. Specifically, the wavelength dependent refractive index, extinction coefficient, reflectance, and absorption coefficient, along with electronic band gap structure of the Sn doped ZnO has been examined and analyzed. In addition, X-ray diffraction (XRD) patterns have been obtained to investigate the structural characteristics of Sn-doped ZnO crystals with varying concentrations of Sn dopant atoms. The incorporation of tin (Sn) into zinc oxide (ZnO) has been observed to significantly impact the opto-electronic properties of the material. This effect can be attributed to the improved electronic band structure and optical characteristics resulting from the tin doping. Furthermore, the controllable structural and optical characteristics of tin-doped zinc oxide will facilitate the development of various light-sensitive devices. Moreover, the impact of Sn doping on the optoelectronic properties of ZnO is thoroughly investigated and documented.

Synthesis and structural elucidation of a unique turn-off fluorescent sensor based on oxo-bridged tin (IV) cluster for selective detection of dopamine in biological fluids.

An oxo-bridged Sn (IV) Cluster, (TOC) was synthesized and fully characterized by FT-IR, UV-vis, 1H NMR, 119Sn NMR, Mass spectrometry and single crystal X-ray diffraction studies. The single-crystal X-ray analysis revealed that the crystal crystallizes in the monoclinic crystal system possessing the P 21/c space group and exhibited a distorted trigonal bipyramidal geometry. The TOC exhibited a unique turn-off fluorescence response for the selective detection of dopamine (DA) over other analytes. The stoichiometry between the TOC and DA was calculated using Job's plot. The value of the detection limit was found to be 1.33 µM. The Hirshfeld surface analysis was carried out on the crystal structure to investigate the H-H, Cl-H, Cl-Cl, Sn-Cl and Cl-C interaction studies in the molecule. Density Functional Theory (DFT) studies further supported the sensing mechanism, which closely agreed with the experimental results. Furthermore, the TOC chemosensor was used to detect DA in human blood plasma, and molecular docking studies validated the interaction between the chemosensor and protein. Confocal fluorescence imaging studies were carried out and validated TOC sensing ability for DA in human blood plasma.

Synthesis of gold-tin alloy nanoparticles with tunable plasmonic properties.

Plasmonic nanoparticles and nanocrystalline materials have broad applicability in catalysis, optoelectronics, sensing, and sustainability. Below, we detail a robust protocol for the synthesis of bimetallic Au-Sn nanoparticles in mild, aqueous conditions. This protocol describes the steps for synthesizing gold nanoparticle seeds, diffusing Sn into the seeds by chemical reduction, and the optical and structural analysis by UV-visible spectroscopy, X-ray diffraction, and electron microscopy. For complete details on the use and execution of this protocol, please refer to Fonseca Guzman et al.1.

High sensitivity for detecting trace Sn2+ in canned food using novel covalent organic frameworks.

Tin (Sn) element plays a vital role in the human body, and its detection is a mandatory inspection item for canned food. The application of covalent organic frameworks (COFs) in fluorescence detection has received extensive attentions. In this work, we designed a kind of novel COFs (COF-ETTA-DMTA) with high specific surface area (353.13 m2/g) by solvothermal synthesis using 2,5-dimethoxy-1,4-dialdehyde and tetra (4-aminophenyl) ethylene as precursors. It shows fast response time (about 50 s), low detection limit (228 nM) and good linearity (R2 = 0.9968) for the detection of Sn2+. Via coordination behavior, the recognition mechanism of COFs toward Sn2+ was simulated and verified by the small molecule with the same functional unit. More importantly, this COFs was successfully applied to identify Sn2+ in solid canned food (luncheon pork, canned fish, canned red kidney beans) with satisfactory results. This work provides a new approach for determining metal ions with COFs taking the advantage of their natural rich reaction set and specific surface area, improving the detection sensitivity and capacity.

Sn(IV)-Porphyrin-Based Nanostructures Featuring Pd(II)-Mediated Supramolecular Arrays and Their Photocatalytic Degradation of Acid Orange 7 Dye.

Two robust Sn(IV)-porphyrin-based supramolecular arrays (1 and 2) were synthesized via the reaction of trans-Pd(PhCN)2Cl2 with two precursor building blocks (SnP1 and SnP2). The structural patterns in these architectures vary from 2D to 3D depending on the axial ligation of Sn(IV)-porphyrin units. A discrete 2D tetrameric supramolecule (1) was constructed by coordination of {(trans-dihydroxo)[5,10-bis(4-pyridyl)-15,20-bis(phenyl) porphyrinato]}tin(IV) (SnP1) with trans-PdCl2 units. In contrast, the coordination between the {(trans-diisonicotinato)[5,10-bis(4-pyridyl)-15,20-bis(phenyl)porphyrinato]}tin(IV) (SnP2) and trans-PdCl2 units formed a divergent 3D array (2). Axial ligation of the Sn(IV)-porphyrin building blocks not only alters the supramolecular arrays but also significantly modifies the nanostructures, including porosity, surface area, stability, and morphology. These structural changes consequently affected the photocatalytic degradation efficiency under visible-light irradiation towards acid orange 7 (AO) dye in an aqueous solution. The degradation efficiency of the AO dye in the aqueous solution was observed to be between 86% to 91% within 90 min by these photocatalysts.

Dendritic Mesoporous Silica Nanoparticle Supported PtSn Catalysts for Propane Dehydrogenation.

PtSn catalysts were synthesized by incipient-wetness impregnation using a dendritic mesoporous silica nanoparticle support. The catalysts were characterized by XRD, N2 adsorption-desorption, TEM, XPS and Raman, and their catalytic performance for propane dehydrogenation was tested. The influences of Pt/Sn ratios were investigated. Changing the Pt/Sn ratios influences the interaction between Pt and Sn. The catalyst with a Pt/Sn ratio of 1:2 possesses the highest interaction between Pt and Sn. The best catalytic performance was obtained for the Pt1Sn2/DMSN catalyst with an initial propane conversion of 34.9%. The good catalytic performance of this catalyst is ascribed to the small nanoparticle size of PtSn and the favorable chemical state and dispersion degree of Pt and Sn species.

Synthesis and in vitro cytotoxicity study of three di-organotin(IV) Schiff base di-acylhydrazone complexes.

Three di-organotin(IV) complexes have been synthesized by the reaction of Schiff base di-acylhydrazone ligands bis(5-chlorosalicylaldehyde) adipoylhydrazone and R2SnCl2 [R = Me (1), Ph (2), n-Bu (3)]. Structures of all complexes were characterized by 1H, 13C, 119Sn NMR, elemental analysis, IR and mass spectrometry. Experimental results showed that the symmetric diacylhydrazone ligands coordinate the tin atom in a hexadentate form, where the tin atom shows a penta-coordination, in a distorted triangular bipyramid geometry. Using MTT method, in vitro cytotoxicity of three complexes was determined against three cancer cell lines (A549, HeLa, HepG-2). Studies reveal that complex 3 showed the strongest cytotoxic activity among the three complexes, which may be correlated with the generation of intracellular reactive oxygen species. Uptake of complex 3 into cells and promotion of reactive oxygen species were visualized by confocal fluorescence imaging.

Speciation of tin ions in oxide glass containing iron oxide through solvent extraction and inductively coupled plasma atomic emission spectrometry after the decomposition utilizing ascorbic acid.

Determining the concentrations of different Sn ions in glass containing iron oxide by wet chemical analysis is a challenge because a redox reaction occurs between Sn2+ and Fe3+. A chemical analysis method for determining the concentrations of Sn2+ and Sn4+ in soda lime glass containing iron oxide was proposed. A mixture of ascorbic acid, hydrochloric acid, and hydrofluoric acid was used to decompose the sample in a vessel with nitrogen flow. Ascorbic acid functioned as a reductant for Fe3+. Subsequently, the Sn2+ were separated as a diethyldithiocarbamate complex. Furthermore, inductively coupled plasma atomic emission spectroscopy was used to determine the concentrations of Sn4+ and total Sn, from which the concentration of Sn2+ can be calculated. The results were validated by comparing ratios of Sn2+ to total Sn to results obtained using Mössbauer spectroscopy. The results were in agreement, thereby validating the use of the proposed approach.

In vitro DNA binding, pBR322 cleavage and molecular docking studies of 1,2-diaminobenzene, dichloro glycyl glycinate tin(IV) and zirconium(IV) complexes.

De novo design and synthesis of complexes 1,2-diaminobenzene, dichloro glycyl glycinate tin(IV) and zirconium(IV), 1 and 2 as molecular drug entities were carried out. The structure elucidation of 1 and 2 was done by analytical techniques and spectroscopic methods viz. IR, UV-vis, 1H, 13C, 119Sn NMR, ESI-Mass and XRD techniques. In vitro DNA binding studies of 1 and 2 by various biophysical techniques viz electronic absorption, emission spectroscopy and circular dichroism measurements were carried out to evaluate their potential to act as chemotherapeutic candidates; furthermore, cleavage studies with pBR322plasmid DNA and computer-aided molecular docking studies were also done to study the mechanistic pathway and mode of binding at the molecular level. The observed results revealed that complex 1 exhibited greater DNA binding propensity in contrast to complex 2 primarily via electrostatic binding mode. The pBR322 DNA cleavage studies of both the complexes revealed the hydrolytic cleavage mechanism and DNA minor groove binding, which was ascertained by molecular docking studies of the drug candidate. Communicated by Ramaswamy H. Sarma.

Tin Carboxylate Complexes of Natural Bacteriochlorin for Combined Photodynamic and Chemotherapy of Cancer è.

Photodynamic therapy (PDT) is currently one of the most promising methods of cancer treatment. However, this method has some limitations, including a small depth of penetration into biological tissues, the low selectivity of accumulation, and hypoxia of the tumor tissues. These disadvantages can be overcome by combining PDT with other methods of treatment, such as radiation therapy, neutron capture therapy, chemotherapy, etc. In this work, potential drugs were obtained for the first time, the molecules of which contain both photodynamic and chemotherapeutic pharmacophores. A derivative of natural bacteriochlorophyll a with a tin IV complex, which has chemotherapeutic activity, acts as an agent for PDT. This work presents an original method for obtaining agents of combined action, the structure of which is confirmed by various physicochemical methods of analysis. The method of molecular modeling was used to investigate the binding of the proposed drugs to DNA. In vitro biological tests were carried out on several lines of tumor cells: Hela, A549, S37, MCF7, and PC-3. It was shown that the proposed conjugates of binary action for some cell lines had a dark cytotoxicity that was significantly higher (8-10 times) than the corresponding metal complexes of amino acids, which was explained by the targeted chemotherapeutic action of the tin (IV) complex due to chlorin. The greatest increase in efficiency relative to the initial dipropoxy-BPI was found for the conjugate with lysine as a chelator of the tin cation relative to cell lines, with the following results: S-37 increased 3-fold, MCF-7 3-fold, and Hela 2.4-fold. The intracellular distribution of the obtained agents was also studied by confocal microscopy and showed a diffuse granular distribution with predominant accumulation in the near nuclear region.