Determination of valsartan and pitavastatin using synchronous spectrofluorimetry and augmented least squares chemometric models: A comparative study with greenness and blueness assessment.

Hypertension and hyperlipidemia are two common conditions that require effective management to reduce the risk of cardiovascular diseases. Among the medications commonly used for the treatment of these conditions, valsartan and pitavastatin have shown significant efficacy in lowering blood pressure and cholesterol levels, respectively. In this study, synchronous spectrofluorimetry coupled to chemometric analysis tools, specifically concentration residual augmented classical least squares (CRACLS) and spectral residual augmented classical least squares (SRACLS), was employed for the determination of valsartan and pitavastatin simultaneously. The developed models exhibited excellent predictive performance with relative root mean square error of prediction (RRMSEP) of 2.253 and 2.1381 for valsartan and pitavastatin, respectively. Hence, these models were successfully applied to the analysis of synthetic samples and commercial formulations as well as plasma samples with high accuracy and precision. Besides, the greenness and blueness profiles of the determined samples were also evaluated to assess their environmental impact and analytical practicability. The results demonstrated excellent greenness and blueness scores with AGREE score of 0.7 and BAGI score of 75 posing the proposed method as reliable and sensitive approach for the determination of valsartan and pitavastatin with potential applications in pharmaceutical quality control, bioanalytical studies, and therapeutic drug monitoring.

UV imaging for the rapid at-line content determination of different colourless APIs in their tablets with artificial neural networks.

This paper presents a novel high-resolution and rapid (50 ms) UV imaging system, which was used for at-line, non-destructive API content determination of tablets. For the experiments, amlodipine and valsartan were selected as two colourless APIs with different UV induced fluorescent properties according to the measured solid fluorescent spectra. Images were captured with a LED-based UV illumination (385-395 nm) of tablets containing amlodipine or valsartan and common tableting excipients. Blue or green colour components from the RGB colour space were extracted from the images and used as an input dataset to execute API content prediction with artificial neural networks. The traditional destructive, solution-based transmission UV measurement was applied as reference method. After the optimization of the number of hidden layer neurons it was found that the relative error of the content prediction was 4.41 % and 3.98 % in the case of amlodipine and valsartan containing tablets respectively. The results open the possibility to use the proposed UV imaging-based system as a rapid, in-line tool for 100 % API content screening in order to greatly improve pharmaceutical quality control and process understanding.

Fabricating Ultrathin Imprinting Layer for Fast Capture of Valsartan via a Metal Affinity-Oriented Surface Imprinting Method.

Rapid separation and enrichment of targets in biological matrixes are of significant interest in multiple life sciences disciplines. Molecularly imprinted polymers (MIPs) have vital applications in extraction and sample cleanup owing to their excellent specificity and selectivity. However, the low mass transfer rate, caused by the heterogeneity of imprinted cavities in polymer networks and strong driving forces, significantly limits its application in high-throughput analysis. Herein, one novel metal affinity-oriented surface imprinting method was proposed to fabricate an MIP with an ultrathin imprinting layer. MIPs were prepared by immobilized template molecules on magnetic nanoparticles (NPs) with metal ions as bridges via coordination, and then polymerization was done. Under the optimized conditions, the thickness of the imprinting layer was merely 1 nm, and the adsorption toward VAL well matched the Langmuir model. Moreover, it took just 5 min to achieve adsorption equilibrium significantly faster than other reported MIPs toward VAL. Adsorption capacity still can reach 25.3 mg/g ascribed to the high imprinting efficiency of the method (the imprinting factor was as high as 5). All evidence proved that recognition sites were all external cavities and were evenly distributed on the surface of the NPs. The obtained MIP NPs exhibited excellent selectivity and specificity toward VAL, with good dispersibility and stability. Coupled with high-performance liquid chromatography, it was successfully used as a dispersed solid phase extraction material to determine VAL in serum. Average recoveries are over 90.0% with relative standard deviations less than 2.14% at three spiked levels (n = 3). All evidence testified that the MIPs fabricated with the proposed method showed a fast trans mass rate and a large rebinding capacity. The method can potentially use high-throughput separation and enrichment of target molecules in batch samples to meet practical applications.

Investigation of Carcinogenic Impurities of N-Nitrosamines in Sartan Pharmaceutical Products Marketed in Brazil: Development and Validation of Method Based on High-Performance Liquid Chromatography-Tandem Mass Spectrometry.

N-nitrosamines (NA) impurities have unexpectedly been found in sartan products, angiotensin II receptor antagonists that are used to control hypertension, representing an urgent concern for industry, global regulators and for the patients. In this study, an HPLC-MS/MS method was developed and validated for the quantification of six NA (N-nitrosodimethylamine, N-Nitroso-N-methyl-4-aminobutyric acid, N-Nitrosodiethylamine, N-ethyl-N-nitroso-2-propanamine, N-nitroso-diisopropylamine and N-nitroso-di-n-butylamine) in losartan, valsartan, olmesartan, irbesartan, candesartan and telmisartan products. The method was validated in terms of sensitivity, linearity, accuracy, precision, robustness and stability. The limits of quantification were 100, 31.25, 250, 33, 312.5 and 125 µg kg-1 in losartan, valsartan, olmesartan, irbesartan, candesartan and telmisartan samples, respectively, which met the sensitivity requirements for the limits set by Food and Drug Administration of the United States. The standard curves showed good linearity. The recoveries ranged from 93.06 to 102.23% in losartan matrix, 83 to 85.9% in valsartan, 96.1 to 101.2% in olmesartan, 89.2 to 97.5% in irbesartan, 93.4 to 132.0% in candesartan and 62.3 to 106.2% in telmisartan matrix. The other parameters met the validation criteria, the good sensitivity and precision, high accuracy and simple and fast analysis provides a reliable method for quality control of NA in sartan pharmaceutical products. The developed method was successfully applied for the determination of N-nitrosamines in 71 sartan products marketed in Brazil.

Genotoxicity evaluation of a valsartan-related complex N-nitroso-impurity.

Recently, the formation of genotoxic and carcinogenic N-nitrosamines impurities during drug manufacturing of tetrazole-containing angiotensin-II blockers has been described. However, drug-related (complex) nitrosamines may also be generated under certain conditions, i.e., through nitrosation of vulnerable amines in drug substances in the presence of nitrite. An investigation of valsartan drug substance showed that a complex API-related N-nitrosamine chemically designated as (S)-2-(((2'-(1H-tetrazol-5-yl)-[1,1'-biphenyl]-4-yl)methyl)(nitroso)amino)-3-methylbutanoic acid (named 181-14) may be generated. 181-14 was shown to be devoid of a mutagenic potential in the Non-GLP Ames test. According to ICH M7 (R1) (2018), impurities that are not mutagenic in the Ames test would be considered Class 5 impurities and limited according to ICH Q3A (R2) and B (R2) (2006) guidelines. However, certain regulatory authorities raised the concern that the Ames test may not be sufficiently sensitive to detect a mutagenic potential of nitrosamines and requested a confirmatory in vivo study using a transgenic animal genotoxicity model. Our data show that 181-14 was not mutagenic in the transgenic gene mutation assay in MutaTMMice. The data support the conclusion that the Ames test is an adequate and sensitive test system to assess a mutagenic potential of nitrosamines.

Low-Frequency Raman Spectroscopy as an Avenue to Determine the Transition Temperature of ß- and γ-Relaxation in Pharmaceutical Glasses.

In an earlier investigation, low-frequency Raman (LFR) spectroscopy was shown to detect the transition temperature of the ß-relaxation (Tß) in both amorphous celecoxib and various celecoxib amorphous solid dispersions [Be̅rzins, K. Mol. Pharmaceutics 2021, 18(10), 3882-3893]. In this study, we further investigated the application of this technique to determine Tß, an important parameter for estimating crystallization potency of amorphous drugs. Alongside commercially available amorphous drugs (zafirlukast and valsartan disodium salt), differently melt-quenched samples of cimetidine were also analyzed. Overall, the variable-temperature LFR measurements allowed for an easy access to the desired information, including the even lesser transition of the tertiary relaxation motions (Tγ). Thus, the obtained results not only highlighted the sensitivity, but also the practical usefulness of this technique to elucidate (subtle) changes in molecular dynamics within amorphous pharmaceutical systems.

Stability-indicating reversed-phase-HPLC method development and validation for sacubitril/valsartan complex in the presence of impurities and degradation products: Robustness by quality-by-design approach.

According to current regulatory guidelines, a stability-indicating method has been developed to determine the impurities in sacubitril (SCB) and valsartan (VLS) tablet dosage forms and perform robustness studies using the design of experiments approach. The present study was initiated to understand quality target product profile, analytical target profile, and risk assessment for method variables that affect the method response. A reversed-phase-HPLC system was equipped with a Phenomenex Gemini-NX C18 column (150 × 4.6 mm, 3 µm) and a photo diode array detector. A gradient mobile phase was used in this research work. The detection was performed at 254 nm; the flow rate was 1.5 mL/min, and the column temperature was maintained at 30°C. The proposed method was validated per the International Council for Harmonisation Q2 (R1) guidelines. The coefficient of correlation was >0.999 for all impurities. The limits of detection and quantification were evaluated for SCB, VLS, and all impurities. The precision and accuracy were obtained for SCB, VLS, and their related impurities. Intra- and inter-day relative standard deviation values were less than 10.0%, and the recoveries of impurities varied between 90.0 and 115.0%. Based on the validation results, the proposed DoE method can estimate SCB and VLS impurities in the finished dosage form.

Candesartan, losartan and valsartan Zn(II) complexes interactions with bovine serum albumin.

Background: The pharmacological response and the therapeutic efficacy of a drug depends on the interactions with plasma proteins. Methodology: The interaction of bovine serum albumin (BSA) with the metal complexes of antihypertensive drugs, Zn(II)/sartan complexes (candesartan, valsartan and losartan), was investigated using fluorescence quenching determinations at different temperatures. Results: The binding studies of the compounds with BSA showed static quenching and moderate binding with calculated constants in the range of 104-106 M-1, indicating potent serum distribution via albumins. In all cases, negative values of free energy are indicative of spontaneous processes and the stabilization of BSA/compound complexes through hydrogen bonding and van der Waals forces. The results for the sartans agree with the reported pharmacokinetics studies. Conclusion: It has been determined that the three sartans and the Zn complexes could be transported and distributed by albumin.

Preparation and evaluation of a lipid-based drug delivery system to improve valsartan oral bioavailability: pharmacokinetic and pharmacodynamic analysis.

Antihypertensive treatment reduces the risk of cardiovascular complications in patients with high mortality with hypertension. Valsartan is highly selective antihypertensive that is rapidly absorbed after oral administration, but its oral bioavailability is only 25%. It is absorbed from the upper part of the gastrointestinal tract but is less soluble in this acidic environment. We aimed to develop a lipid-based formulation to produce a self-emulsifying drug delivery system (SEDDS) for valsartan. Solubility studies were performed to identify the components of the SEDDS that provided the best dissolution of valsartan. Ternary phase diagrams were drawn using the titration method with oil, surfactants and co-surfactants in which valsartan was highly soluble, and microemulsion formulations with the highest area were determined. Characterization and in vitro release studies were performed to optimize the formulation. In vitro release profiles of commercial and SEDDS formulations showed the F2 formulation release rate increased at pH 1.2 fasted state simulated gastric fluid. After oral administration, plasma drug concentrations in rats indicate that the F2 formulation provided a 4.2-fold greater AUC for valsartan than the commercial formulaiton, resulting in an 8.5-fold greater Cmax. These findings suggest the F2 formulation increases valsartan solubility, resulting in an improved oral pharmacokinetic profile. According to the pharmacodynamic study, the F2 formulation is more effective than the commercial formulation in restoring systolic and diastolic blood pressure within a few hours.

Sustainable Stabilizer-Free Nanoparticle Formulations of Valsartan Using Eudragit® RLPO.

The bioavailability of the antihypertensive drug valsartan can be enhanced by various microencapsulation methods. In the present investigation, valsartan-loaded polymeric nanoparticles were manufactured from Eudragit® RLPO using an emulsion-solvent evaporation method. Polyvinyl alcohol (PVA) was found to be a suitable stabilizer for the nanoparticles, resulting in a monodisperse colloid system ranging in size between 148 nm and 162 nm. Additionally, a high encapsulation efficiency (96.4%) was observed. However, due to the quaternary ammonium groups of Eudragit® RLPO, the stabilization of the dispersion could be achieved in the absence of PVA as well. The nanoparticles were reduced in size (by 22%) and exhibited similar encapsulation efficiencies (96.4%). This more cost-effective and sustainable production method reduces the use of excipients and their expected emission into the environment. The drug release from valsartan-loaded nanoparticles was evaluated in a two-stage biorelevant dissolution set-up, leading to the rapid dissolution of valsartan in a simulated intestinal medium. In silico simulations using a model validated previously indicate a potential dose reduction of 60-70% compared to existing drug products. This further reduces the expected emission of the ecotoxic compound into the environment.

Nanostructured Valsartan Microparticles with Enhanced Bioavailability Produced by High-Throughput Electrohydrodynamic Room-Temperature Atomization.

The high-throughput drying and encapsulation technique called electrospraying assisted by pressurized gas (EAPG) was used for the first time to produce nanostructured valsartan within microparticles of excipients. Valsartan, a poorly absorbed and lipid-soluble drug, was selected since it is considered a good model for BCS class II drugs. Two different polymeric matrices were selected as excipients, i.e., hydroxypropyl methylcellulose (HPMC) and lactose monohydrate, while Span 20 was used as a surfactant. The produced 80% valsartan loading formulations were characterized in terms of morphology, crystallinity, in vitro release, in vitro Caco-2 cells' permeability, and in vivo pharmacokinetic study. Spherical microparticles of ca. 4 µm were obtained within which valsartan nanoparticles were seen to range from 150 to 650 nm. Wide-angle X-ray scattering and differential scanning calorimetry confirmed that valsartan had a lower and/or more ill-defined crystallinity than the commercial source, and photon correlation spectroscopy and transmission electron microscopy proved that it was dispersed and distributed in the form of nanoparticles of controlled size. In vitro dissolution tests showed that the HPMC formulation with the lowest API particle size, i.e., 150 nm, dissolved 2.5-fold faster than the commercial valsartan in the first 10 min. This formulation also showed a 4-fold faster in vitro permeability than the commercial valsartan and a 3-fold higher systemic exposure than the commercial sample. The results proved the potential of the EAPG processing technique for the production of safe-to-handle microparticles containing high quantities of a highly dispersed and distributed nanonized BCS class II model drug with enhanced bioavailability.

Role of Hydrogen Bonds in Formation of Co-amorphous Valsartan/Nicotinamide Compositions of High Solubility and Durability with Anti-hypertension and Anti-COVID-19 Potential.

Physicochemical properties, in particular solubility and the associated bioavailability, are key factors in determining efficacy of poorly water-soluble drugs, which constitute 40% of new drugs in the market, and improving them is an important challenge for modern pharmacy. A recent strategy to achieve this goal is formation of stable co-amorphous solid dispersions with co-formers of low molecular weight. Here, the amorphization strategy was applied for low-soluble anti-hypertensive valsartan (VAL), an angiotensin II receptor blocker, and nicotinamide, which exhibits lung- and cardio-protective effects. Through interactions with the renin-angiotensin-aldosteron system, VAL may be used to treat both hypertension and the current pandemic coronavirus SARS-CoV-2 infection. Using mechanochemical and liquid- and solid-state approaches, solvated co-amorphous solid dispersions of VAL with nicotinamide were obtained. They were characterized by spectroscopic, thermal, and X-ray analyses. The density functional theory, quantum theory of atoms in molecules, and non-covalent interaction index calculations revealed the presence of two types of hydrogen bonds between VAL and NIC (i.e., N-H···O and O-H···O). One of them had a partially covalent character, which caused conformational changes in the flexible VAL molecule, restricting contribution of the tetrazolyl N-H donor and thus limiting the possibility of co-crystal formation. The recognized VAL/NIC1- and VAL/NIC2-type heterodimeric interactions were responsible for the excellent durability of the solid compositions and up to 24-fold better solubility than VAL alone. The synthesized dispersions constitute a new class of dually acting drugs, containing an active pharmaceutical ingredient (VAL) and supporting nutraceutical (nicotinamide).

Dual-drug amorphous formulation of gliclazide.

Amorphization is a well-established strategy to enhance the dissolution properties of poorly water-soluble drugs. However, the amorphous state is inherently unstable toward recrystallization. Coamorphous systems of a drug and a small-molecule excipient or of two complementary drugs often show an enhanced stability. Diabetes and hypertension are frequently coexistent. In this paper a study on the coamorphization of the poorly water-soluble antidiabetic drug gliclazide (glz) and the antihypertensive drug valsartan (val) is reported. Amorphous glz recrystallized after 1 d under ambient conditions, whereas coamorphous glz-val containing glz and val in a 1:1 or 1:2 molar ratio was stable for at least four months at 20 °C and 56% relative humidity. The dissolution rate of glz increased in the order crystalline glz < glz-val_1:1 < glz-val_1:2. Furthermore, ternary coamorphous systems of glz, val and an excipient were prepared; glz-val_1:1_PVP, glz-val_1:1_HPC, glz-val_1:1_ALM, glz-val_1:1_MCC (PVP = polyvinylpyrrolidone, HPC = hydroxypropyl cellulose, ALM = α-lactose monohydrate, MCC = microcrystalline cellulose). MCC and HPC did not affect the stability of the coamorphous system, while ALM promoted the recrystallization of glz in glz-val_1:1_ALM during storage and freshly prepared glz-val_1:1_PVP contained small amounts of crystalline glz. Glz-val_1:1_MCC showed enhanced dissolution properties compared to crystalline glz and glz-val_1:1 and is a viable fixed-dose formulation.

Evaluation of Drug Dissolution Rate in Co-amorphous and Co-crystal Binary Drug Delivery Systems by Thermodynamic and Kinetic Methods.

In order to better explain and predict the dissolution characteristics of binary drug delivery systems (BDDSs), the dissolution behaviors of co-crystal (CC) and co-amorphous (CA) systems of sacubitril (SCB) and valsartan (VST) were evaluated in vitro and in vivo by thermodynamic and kinetic methods. The CCs of SCB and VST were prepared into a CA state through rotary evaporation. Solid-state properties were systematically evaluated. Herein, based on the results from previous studies of single-phase systems, we used thermodynamic methods to evaluate the increase in drug dissolution rate after BDDSs change from the crystalline to the amorphous state. After comparing the predicted and measured dissolution rate enhancement of the CC and CA systems, this paper attempts to explain the dissolution rate characteristics of the BDDSs. We then evaluated the bioavailability of two BDDSs in beagle dogs to confirm that there was no discrepancy in vivo with the results obtained in vitro. The results exhibited that there is strong intermolecular interaction between SCB and VST and good physical stability for the CA system. Compared with the CC, the bioavailability of SCB and VST in the CA system increased by 313.9% and 130.5%, respectively. The predicted dissolution rate ratio between CC and CA systems and their actual intrinsic dissolution rates differed by only a factor of 2.5, demonstrating the good correlation between the predicted and measured values. In the future, this method could be expanded to a variety of new samples and exciting drug prospects.

Application of capillary electrophoresis-nano-electrospray ionization-mass spectrometry for the determination of N-nitrosodimethylamine in pharmaceuticals.

After a presence of highly hepatotoxic and potentially carcinogenic N-nitrosodimethylamine was detected in certain lots of sartan, ranitidine, metformin, and other pharmaceuticals, local regulatory authorities issued recalls of suspected products, and concerns of the pharmacotherapy safety were widely discussed. Since then, testing of a representative sample of each produced lot of these pharmaceuticals is required as a part of quality control processes. Hence, an interface-free CE-nanoESI system coupled with MS detection was employed for the development of a simple and economical method for quantitative detection of this contaminant in the valsartan drug substances and finished formulations used as model matrices. In this arrangement, a fused-silica capillary was used as both a separation column and a nanoESI emitter providing high ionization efficiency and sensitivity. The optimized procedure was found to have sufficient selectivity, linearity, accuracy, and precision. The established LOD and LOQ values were 0.3 and 1.0 ng/mL, respectively. The practical applicability of the method was tested by analyses of commercially available Valsacor® tablets. The results obtained prove that the developed procedure represents a promising alternative to currently available GC- and LC-based methods. Furthermore, after an adjustment of the separation conditions, the CE-nanoESI/MS system can be conceptually used for the determination of NDMA in other suspected pharmaceuticals.

Green preparation of dual-template chitosan-based magnetic water-compatible molecularly imprinted biopolymer.

In the current study, a green method was used for the fabrication of dual-template chitosan-based magnetic water-compatible molecularly imprinted biopolymer in water without using organic and toxic reagents and then, its application as a sorbent for the simultaneous pre-concentration and determination of valsartan (VAL) and losartan (LOS) from urine samples followed by HPLC-UV. Chitosan was used as a multi-functional monomer due to its unique properties in terms of non-toxic, cost-effectiveness, readily available, biocompatible, biodegradable and easy to polymerize in mild condition. The proposed sorbent represents the exceptional properties in terms of green synthesis, high magnetic strength, bio-compatibility, high selectivity, fast equilibrium adsorption as well as high adsorption capacity. In the optimized conditions, the developed MMIP-DMSPE-HPLC/UV method showed a wide linear range of 5.0 - 1500.0 µg L-1 for VAL and 8.0 - 1500 µg L-1 for LOS and low LODs of 1.4 and 2.3 µg L-1 for VAL and LOS, respectively with RSD% values less than 5.0, (n = 5). The obtained recoveries were 95.6-100.2 % for VAL and 92.0-98.1 % for LOS which showed the applicability of green, water-compatible and bio-compatibility of the proposed method for neat and selective extraction of VAL and LOS from complicated urine samples.

Immobilized angiotensin II type I receptor: A powerful method of high throughput screening for antihypertensive compound identification through binding interaction analysis.

The enormous growth in drug discovery paradigm has necessitated continuous exploration of new methods for drug-protein interaction analysis. To enhance the role of these methodologies in designing rational drugs, this work extended an immobilized angiotensin II type I receptor (AT1R) based affinity chromatography in antihypertensive compound identification. We fused haloalkane dehalogenase at C-terminus of AT1R and expressed the fusion receptor in E. coli. The expressed receptor was covalently immobilized onto 8.0 µm microspheres by mixing the cell lysate with 6-chlorocaproic acid-modified amino polystyrene microspheres. The immobilized AT1R was utilized for thermodynamic and kinetic interaction analysis between the receptor and four specific ligands. Following confirmation of these interactions by molecular docking, we identified puerarin and rosmarinic acid by determining their binding to the receptor. Azilsartan, candesartan, valsartan and olmesartan displayed two kinds of binding sites to AT1R by injection amount-dependent method. By molecular docking, we recognize the driving forces of the interaction as electrostatic interaction, hydrogen bonds and van der Waals force. The dissociation rate constants (kd) of azilsartan, candesartan, valsartan and olmesartan to AT1R were 0.01138 ± 0.003, 0.05142 ± 0.003, 0.07547 ± 0.004 and 0.01310 ± 0.005 min-1 by peak profiling assay. Comparing with these parameters, puerarin and rosmarinic acid presented lower affinity (KA: 0.12 × 104 and 1.5 × 104/M) and slower kinetics (kd: 0.6864 ± 0.03 and 0.3005 ± 0.01 min-1) to the receptor. These results, taking together, indicated that the immobilized AT1R has the capacity to probe antihypertensive compounds.

Preparation of magnetic molecularly imprinted polymer for dispersive solid-phase extraction of valsartan and its determination by high-performance liquid chromatography: Box-Behnken design.

In this work, core/shell magnetic molecularly imprinted polymer nanoparticles were synthesized for extraction and pre-concentration of valsartan from different samples and then it was measured with high-performance liquid chromatography. For preparation of molecularly imprinted polymer nanoparticles, Fe3 O4 nanoparticles were coated with tetraethyl orthosilicate and then functionalized with 3-(trimethoxysilyl) propyl methacrylate. In the next step, molecularly imprinted polymer nanoparticles were synthesized under reflux and distillation conditions via polymerization of methacrylic acid, valsartan (as a template), azobisisobutyronitrile and ethylene glycol dimethacrylate as cross linking. The properties of molecularly imprinted polymer nanoparticle were investigated by FTIR spectroscopy, field emission scanning electron microscopy, and X-ray diffraction. Box-Behnken design with the aid of desirability function was used for optimizing the effect of variables such as the amounts of molecularly imprinted polymer nanoparticles, time of sonication, pH, and volume of methanol on the extraction percentage of valsartan. According to the obtained results, the affecting variables extraction condition were set as 10 mg of adsorbent, 16 min for sonication, pH = 5.5 and 0.6 mL methanol. The obtained linear response (r2  > 0.995) was in the range of 0.005-10 µg/mL with detection limit 0.0012 µg/mLand extraction recovery was in the range of 92-95% with standard deviation less than 6% (n = 3).

The Evaluation of Valsartan Biopharmaceutics Properties.

BACKGROUND: Solubility, intestinal permeability and dissolution are the main factors that govern the rate and extent of drugs absorption and are directly related to bioavailability. Biopharmaceutics Classification System (BCS) is an important tool which uses in vitro results for comparison with bioavailability in vivo (biowaiver). Valsartan is widely used in the treatment of hypertension and shows different BCS classification in the literature (BCS class II or III). OBJECTIVE: This work proposes the study of valsartan biopharmaceutics properties and its BCS classification. METHODS: High Performance Liquid Chromatography (HPLC) method was developed and validated to quantify the drug in buffers pH 1.2, 4.5 and 6.8 respectively. Valsartan solubility was determined in these three different media using shake flask method and intrinsic dissolution rate. Evaluation of dissolution profile from coated tablets was conducted. RESULTS: The low solubility (pH 1.2 and 4.5) and high solubility (pH 6.8) were observed for both solubility methods. Permeability data reported from the literature showed that valsartan is a low permeability drug. Valsartan presented the rapid release profile only in pH 6.8. CONCLUSION: We defined that valsartan is a class IV drug, in disagreement with what has been published so far. It is important to emphasize that the conditions considered here are indicated to define the biopharmaceutics classification by regulatory agencies.