Middle Ear Welding Injury: Case Report and Literature Review.

Damage to the middle ear (ME) caused by penetrating welding sparks can lead to a variety of adverse outcomes. An exhaustive review of the literature is lacking, particularly with regard to clinical presentation, diagnostic-therapeutic work-up, and outcomes. Here we describe the clinical details of an injury caused by the largest welding foreign body ever reported in the ME. In addition, we present a comprehensive review of the relevant literature.

[Bioaccessibility characteristics of metals in welding fume and its application in exposure assessment].

Objective: To explore the bioaccessibility of the main metal components in welding fume welding fume in simulated lung fluid, and to evaluate the exposure level of each metal component in combination with the EPA inhalation exposure risk assessment model. Methods: In November 2022, the microscopic morphology characteristics of welding fumes were analyzed by scanning electron microscopy, the bioaccessibility of each metal component in lung fluid simulated normal and lung inflammatory states was analyzed by in vitro simulation method, and the exposure level of each metal component was calculated in combination with the EPA inhalation exposure risk assessment model. Results: The main metal components in carbon dioxide gas shielded welding fumes were Fe, Mn, Zn, Ti, Al, Cu, Cr, Cd, Ni and As, and the bioaccessibility in simulated normal lung interstitial fluid was 0.82%-1.84%, 5.07%-9.41%, 4.52%-7.23%, 5.10%-8.67%, 20.48%-29.60%, 5.27%-9.83%, 4.80%-7.56%, 0.07%-1.08%, 6.48%-13.84% and 33.02%-42.81%. The bioaccessibility of the above metal components in the lung fluid under simulated lung inflammation was 14.79%-27.45%, 34.53%-46.11%, 35.31%-59.13%, 16.45%-22.51%, 60.78%-76.51%, 26.58%-34.12%, 15.32%-25.87%, 2.0%-5.7%, 34.77%-43.33% and 71.34%-88.36%, respectively. Compared with the simulated lurg interstitial fluid, the bioaccessibility of metal components in the lung fluid under the simulated inflammatory state was increased, and the difference was statistically significant (P<0.05). The average daily exposure dose Mn in the two simulated lung fluids exceeded the inhalation reference limit (>50 times), and the average daily exposure dose Ti and Cr in the simulated lung inflammation exceeded the reference limit (>1.3 times) . Conclusion: Attention should be paid to the bioaccessibility characteristics of metal components in the exposure level and hazard assessment of welding fumes.

NMR-based metabolomics for investigating urinary profiles of metal carpentry workers exposed to welding fumes and volatile organic compounds.

Introduction: Metal carpentry includes a wide range of work activities such as welding and cutting metallic components, use of solvents and paints. Therefore, the employees in these types of activities are mainly exposed to welding fumes and volatile organic solvents. Here, we present an NMR-based metabolomic approach for assessing urinary profiles of workers in the same company that are exposed to two different risk factors. Methods: The study enrolled 40 male subjects exposed to welding fumes, 13 male subjects exposed to volatile organic compounds of a metal carpentry company, and 24 healthy volunteers. All samples were collected, in the middle of the working week at fast. Thirty-five urinary metabolites belonging to different chemical classes such as amino acids, organic acids and amines were identified and quantified. Results were processed by multivariate statistical analysis for identifying significant metabolites for each working group examined, compared to controls. Results: Workers exposed to welding fumes displayed urinary increase in glutamine, tyrosine, taurine, creatine, methylguanidine and pseudouridine associated to oxidative impairment, while workers exposed to volatile organic compounds showed higher urinary levels of branched chain aminoacids. Conclusion: Our work identified specific urinary profile related to each occupational exposure, even if it is below the threshold limit values.

Frequencies of chromosomal aberrations and related biochemical parameters in welders.

Stainless steel welders are exposed to heavy filler metals. We evaluated the concentration of these metals in whole blood and urine, and the relevant biochemical parameters in relation to the total chromosomal aberrations (CAs), chromatid-type (CTA-type, CTAs) and chromosome-type (CSA-type, CSAs), in 117 welders and control individuals. Statistically higher concentrations of the total Cr, Ni and Mn were observed in whole blood and urine of welders, and the concentrations were higher in welders who smoked. On the contrary, concentrations of urinary heavy metals Cr and Mn adjusted for creatinine were significantly higher in the control groups. A statistically higher frequency of total CAs was observed in the whole group of welders, and also in the non-smoking welders, as compared to controls. The frequency of total CAs significantly correlated with the concentration of Cr, Ni and Mn in whole blood (R=0.61, P˂0.0001, R=0.33, P˂0.0001 and R=0.66, P˂0.0001, respectively), with urinary concentrations of Ni and Mn (R=0.27, P=0.003 and R=0.28, P=0.003, respectively) and with urinary concentrations of Cr, Ni and Mn adjusted for creatinine (R=0.22, P=0.029, R=0.26, P=0.005 and R=0.20, P=0.030, respectively). Likewise, the frequency of CTA-types significantly correlated with the concentration of Cr and Mn in whole blood (R=0.31, P=0.0007 and R=0.34, P=0.0002). The frequency of CSA-types significantly correlated with concentrations of Cr, Ni and Mn in whole blood (R=0.43, P˂0.0001, R=0.38, P˂0.0001 and R=0.46, P˂0.0001, respectively). The statistically higher values of serum creatinine and total bilirubin were detected in all welders, as well as in smokers when compared to the corresponding controls. The exposure to heavy metals in welders increased the frequencies of CAs and altered the balance between urinary excretion of heavy metals and their possible accumulation.

Continuous and synchronous calibration process of ovality and straightness for longitudinally submerged arc welding pipes with three rollers.

A new process of continuous and synchronous calibration process of ovality and straightness for LSAW (Longitudinally Submerged Arc Welding, LSAW) pipes with three rollers is proposed. Specifically, the process is introduced from three aspects: roller-shape, loading parameters and axial and circumferential deformation paths. The process is verified by numerical simulation and physical experiments. Further, the stress-strain in the Sections Ⅱ and Ⅳ is analyzed. The relationship between the process parameters and the residual ovality and residual straightness by experiments is discussed. The calibration scheme of LSAW pipes is put forward by using the control variable method. The results show that the shear stress is the principal stress direction in the Sections Ⅱ and Ⅳ. The residual ovality and residual straightness decrease with the increase of the radial reduction and times of reciprocating bending. The reciprocating bending process can eliminate the difference of the initial curvature, make the curvature of each section tend to be uniform. After calibration, the residual straightness is less than 0.2% and the residual ovality is less than 1%, demonstrating a good feasibility of this process.

Neurological and neurobehavioral effects of welders in Egypt exposed to manganese containing welding fumes.

PURPOSE: Welders are more likely to develop neurobehavioral disorders because of their exposure to neurotoxic metals such as manganese. This study aimed to measure the neurobehavioral performance of welders occupationally exposed to manganese at welding enterprises and its relationship with the workplace environment. METHODS: It is a comparative cross-sectional study carried out on 130 welders working at 50 welding enterprises in Menoufia governorate, Egypt, compared to 130 non-occupationally exposed controls. RESULTS: It was found that the environments of the studied welding enterprises had levels of respirable dust, manganese, and total welding fumes that exceeded internationally permissible limits. In addition, the mean blood manganese levels were significantly higher among welders (4.16 ± 0.61) than the controls (1.72 ± 0.41). Welders had a significantly higher prevalence of neurological manifestations and lower performance of neurobehavioral tests. Lower neurobehavioral performance among welders was significantly correlated with increased work duration and blood levels in some tests. CONCLUSION: To lessen the fumes in the breathing zone of workers, it is therefore strongly recommended to regularly wear high-quality personal protective equipment, especially masks, and to ensure proper ventilation.

Longitudinal changes in cardiovascular disease-related proteins in welders.

OBJECTIVE: Occupational exposure to welding fumes is linked to a higher risk of cardiovascular disease; however, the threshold exposure level is unknown. Here, we aimed to identify changes in proteins associated with cardiovascular disease in relation to exposure to welding fumes. METHODS: Data were obtained from two timepoints six years apart for 338 non-smoking men (171 welders, 167 controls); of these, 174 (78 welders, 96 controls) had measurements available at both timepoints. Exposure was measured as personal respirable dust (adjusted for personal protective equipment), welding years, and cumulative exposure. Proximity extension assays were used to measure a panel of 92 proteins involved in cardiovascular processes in serum samples. Linear mixed models were used for longitudinal analysis. The biological functions and diseases related to the identified proteins were explored using the Ingenuity Pathway Analysis software. RESULTS: At both timepoints, the median respirable dust exposure was 0.7 mg/m3 for the welders. Seven proteins were differentially abundant between the welders and controls and increased incrementally with respirable dust: FGF23, CEACAM8, CD40L, PGF, CXCL1, CD84, and HO1. CD84 was significant after adjusting for multiple comparisons. These proteins have been linked to disorders of blood pressure, damage related to clogged blood vessels, and chronic inflammatory disorders. CONCLUSION: Exposure to mild steel welding fumes below current occupational exposure limits for respirable particles and welding fumes in Europe and the US (1-5 mg/m3) was associated with changes in the abundance of proteins related to cardiovascular disease. Further research should evaluate the utility of these proteins as prospective biomarkers of occupational cardiovascular disease.

Do toenail manganese and iron levels reflect brain metal levels or brain metabolism in welders?

Inhalation of welding fumes can cause metal accumulation in the brain, leading to Parkinsonian-like symptoms. Metal accumulation and altered neurochemical profiles have been observed using magnetic resonance imaging (MRI) in highly exposed welders, being associated with decreased motor function and cognition. While MRI is impractical to use as a health risk assessment tool in occupational settings, toenail metal levels are easier to assess and have been demonstrated to reflect an exposure window of 7-12 months in the past. Yet, it is unclear whether toenail metal levels are associated with brain metal levels or changes in metabolism, which are the root of potential health concerns. This study investigates whether toenail manganese (Mn) and iron (Fe) levels, assessed at several time points, correlate with brain Mn and Fe levels, measured by MRI, as well as brain GABA, glutamate (Glu), and glutathione (GSH) levels, measured by Magnetic Resonance Spectroscopy (MRS), in seventeen Mn-exposed welders. Quantitative T1 and R2* MRI maps of the whole brain, along with GABA, Glu, and GSH MRS measurements from the thalamus and cerebellum were acquired at baseline (T0). Toenail clippings were collected at T0 and every three months after the MRI for a year to account for different exposure periods being reflected by toenail clippings and MRI. Spearman correlations of toenail metal levels were run against brain metal and metabolite levels, but no significant associations were found for Mn at any timepoint. Cerebellar GSH positively correlated with toenail Fe clipped twelve months after the MRI (p = 0.05), suggesting an association with Fe exposure at the time of the MRI. Neither thalamic GABA nor Glu correlated with toenail Fe levels. In conclusion, this study cannot support toenail Mn as a proxy for brain Mn levels or metabolic changes, while toenail Fe appears linked to brain metabolic alterations, underscoring the importance of considering other metals, including Fe, in studying Mn neurotoxicity.

Absence of lung tumor promotion with reduced tumor size in mice after inhalation of copper welding fumes.

Welding fumes are a Group 1 (carcinogenic to humans) carcinogen as classified by the International Agency for Research on Cancer. The process of welding creates inhalable fumes rich in iron (Fe) that may also contain known carcinogenic metals such as chromium (Cr) and nickel (Ni). Epidemiological evidence has shown that both mild steel (Fe-rich) and stainless steel (Fe-rich + Cr + Ni) welding fume exposure increases lung cancer risk, and experimental animal data support these findings. Copper-nickel (CuNi) welding processes have not been investigated in the context of lung cancer. Cu is intriguing, however, given the role of Cu in carcinogenesis and cancer therapeutics. This study examines the potential for a CuNi fume to induce mechanistic key characteristics of carcinogenesis in vitro and to promote lung tumorigenesis, using a two-stage mouse bioassay, in vivo. Male A/J mice, initiated with 3-methylcholanthrene (MCA; 10 µg/g), were exposed to CuNi fumes or air by whole-body inhalation for 9 weeks (low deposition-LD and high deposition-HD) and then sacrificed at 30 weeks. In BEAS-2B cells, the CuNi fume-induced micronuclei and caused DNA damage as measured by γ-H2AX. The fume exhibited high reactivity and a dose-response in cytotoxicity and oxidative stress. In vivo, MCA/CuNi HD and LD significantly decreased lung tumor size and adenomas. MCA/CuNi HD exposure significantly decreased gross-evaluated tumor number. In summary, the CuNi fume in vitro exhibited characteristics of a carcinogen, but in vivo, the exposure resulted in smaller tumors, fewer adenomas, less hyperplasia severity, and with HD exposure, less overall lung lesions/tumors.

Occupational exposure to welding fume in Australia: An online survey.

OBJECTIVE: This survey aimed to investigate exposure to welding fume in Australian workplaces and the use of protective and control measures among workers. METHODS: Data were collected via a cross-sectional online survey of workers and employers involved in welding in Australia. Survey questions focused on the determinants of exposure to welding fume, welding experience and qualifications, and use of control measures. RESULTS: There were 634 respondents to the survey across Australia of whom 577 (91%) were assessed as being exposed to welding fume, most at high levels. Welders undertook a wide range of types of welding, and higher-risk welding such as in confined and restricted spaces was common. Most workplaces did not have any form of mechanical ventilation, and use of air-supplied respiratory protection was poor even when ventilation was not used. CONCLUSION: Welders in Australia are exposed to several carcinogens, particularly welding fume, hexavalent chromium (CrVI) and nickel, and the use of control measures is sub-optimal. IMPLICATIONS FOR PUBLIC HEALTH: Higher-order controls are the best way to reduce exposure to carcinogens in the workplace. The lack of use of these controls by Australian welders is concerning and needs to be a focus of attention by regulators and companies.

Development of implantable electrode based on bioresorbable Mg alloy for tissue welding application.

An implantable electrode based on bioresorbable Mg-Nd-Zn-Zr alloy was developed for next-generation radiofrequency (RF) tissue welding application, aiming to reduce thermal damage and enhance anastomotic strength. The Mg alloy electrode was designed with different structural features of cylindrical surface (CS) and continuous long ring (LR) in the welding area, and the electrothermal simulations were studied by finite element analysis (FEA). Meanwhile, the temperature variation during tissue welding was monitored and the anastomotic strength of welded tissue was assessed by measuring the avulsion force and burst pressure. FEA results showed that the mean temperature in the welding area and the proportion of necrotic tissue were significantly reduced when applying an alternating current of 110 V for 10 s to the LR electrode. In the experiment of tissue welding ex vivo, the maximum and mean temperatures of tissues welded by the LR electrode were also significantly reduced and the anastomotic strength of welded tissue could be obviously improved. Overall, an ideal welding temperature and anastomotic strength which meet the clinical requirement can be obtained after applying the LR electrode, suggesting that Mg-Nd-Zn-Zr alloy with optimal structure design shows great potential to develop implantable electrode for next-generation RF tissue welding application.

Systematic review and meta-analysis on prevalence, pattern, and factors associated with ocular protection practices among welders in sub-Saharan Africa.

Background: Due to hazardous working conditions, welders are more likely to be exposed to mild to severe eye issues during the welding process. Globally, this issue is a major contributor to vision loss and blindness. One of the most frequent causes of unilateral blindness in the globe is ocular injury. Objective: This review aimed to assess the pooled prevalence of ocular protection practice and associated factors among welders in sub-Saharan Africa. Methods: Databases including PubMed, Scopus, web of Science, Google Scholar, and the African Journals Online were systematically searched for relevant literature. The statistical analysis was performed using STATA data analysis software version 14, while Microsoft Excel was used for data abstraction. We checked publication bias using a funnel plot and Egger and Begg regression tests. A p-value < 0.05 was considered significant, suggesting the presence of presence publication bias. The I2 statistics were used to assess heterogeneity between studies. The study's overall effect was evaluated using the random effects model. Results: From retrieved 2,326 original studies, 17 studies were included in the final pooled prevalence analysis. The overall prevalence of ocular protection practice among small-scale welders in sub-Saharan Africa was 53.71% (95% CI: 42.54, 64.88). Having pre and in-service training [AOR: 4.97, 95% CI: (2.64, 9.36)], having work experience as a welder [AOR: 4.94, 95% CI: (3.24, 7.54)], and having a history of ocular injury [AOR: 2.99, 95% CI: (1.58, 5.66)] were significantly associated with the ocular protection practices. Conclusions: In sub-Saharan African countries, the ocular protection practices among small-scale welders were low. Furthermore, the current meta-analysis found ocular protection practice to be significantly associated with on-the-job training, work experience of welders, and a history of ocular injury in the past year of small-scale welders in sub-Saharan Africa. This review will serve as baseline data for further studies to generate inputs for eye care providers and policymakers to improve good practice levels about ocular protection. Policies should be put in place to ensure all welders use proper personal-protective equipment, and receive regular health training.

Gray matter morphometric biomarkers for distinguishing manganese-exposed welders from healthy adults revealed by source-based morphometry.

BACKGROUND: Chronic overexposure to manganese (Mn) may result in neurotoxicity, which is characterized by motor and cognitive dysfunctions. This study aimed to utilize multivariate source-based morphometry (SBM) to explore the biomarkers for distinguishing Mn-exposed welders from healthy controls (HCs). METHODS: High-quality 3D T1-weighted MRI scans were obtained from 45 Mn-exposed full-time welders and 33 age-matched HCs in this study. After extracting gray matter structural covariation networks by SBM, multiple classic interaction linear models were applied to investigate distinct patterns in welders compared to HCs, and Z-transformed loading coefficients were compared between the two groups. A receiver operating characteristic (ROC) curve was used to identify potential biomarkers for distinguishing Mn-exposed welders from HCs. Additionally, we assessed the relationships between clinical features and gray matter volumes in the welders group. RESULTS: A total of 78 subjects (45 welders, mean age 46.23±4.93 years; 33 HCs, mean age 45.55±3.40 years) were evaluated. SBM identified five components that differed between the groups. These components displayed lower loading weights in the basal ganglia, thalamus, default mode network (including the lingual gyrus and precuneus), and temporal lobe network (including the temporal pole and parahippocampus), as well as higher loading weights in the sensorimotor network (including the supplementary motor cortex). ROC analysis identified the highest classification power in the thalamic network. CONCLUSIONS: Altered brain structures might be implicated in Mn overexposure-related disturbances in motivative modulation, cognitive control and information integration. These results encourage further studies that focus on the interaction mechanisms, including the basal ganglia network, thalamic network and default mode network. Our study identified potential neurobiological markers in Mn-exposed welders and illustrated the utility of a multivariate method of gray matter analysis.

Enhancement of keratinocyte survival and migration elicited by interleukin 24 upregulation in dermal microvascular endothelium upon welding-fume exposure.

Occupational exposure to welding fumes constitutes a serious health concern. Although the effects of fumes on the respiratory tract have been investigated, few apparent reports were published on their effects on the skin. The purpose of this study was to investigate the effects of exposure to welding fumes on skin cells, focusing on interleukin-24 (IL-24), a cytokine involved in the pathophysiology of skin conditions, such as atopic dermatitis and psoriasis. Treatment with welding fumes increased IL-24 expression and production levels in human dermal microvascular endothelial cells (HDMEC) which were higher than that in normal human epidermal keratinocytes. IL-24 levels in Trolox and deferoxamine markedly suppressed welding fume-induced IL-24 expression in HDMEC, indicating that oxidative stress may be involved in this cytokine expression. IL-24 released from HDMEC protected keratinocytes from welding fume-induced damage and enhanced keratinocyte migration. Serum IL-24 was higher in welding workers than in general subjects and was positively correlated with elevated serum levels of 8-hydroxy-2'-deoxyguanosine, an oxidative stress marker. In summary, welding fumes enhanced IL-24 expression in HDMEC, stimulating keratinocyte survival and migration. IL-24 expression in endothelial cells may act as an adaptive response to welding-fume exposure in the skin.

[Analysis of disease burden of welder's pneumoconiosis in Jiangsu Province].

Objective: To investigate the current status of disease burden and its influencing factors among welder's pneumoconiosis patients, and provide scientific basis for taking targeted intervention measures. Methods: From June 2022 to June 2023, the patients with welder's pneumoconiosis in Jiangsu Province were selected from 1956 to 2020 as the research objects, and disability adjusted life years (DALY) were used as the comprehensive index to study the disease burden. The direct and indirect economic losses caused by the diseases were calculated, and the factors affecting the disease burden were discussed by multiple linear regression method. Results: A total of 974 cases of welder's pneumoconiosis were reported in Jiangsu Province, the cumulative loss of DALY was 6300.73 person-years, and the per capita loss was 6.47 person-years. Among them, the healthy life years lost due to disability (YLD) was 6156.50 person-years (97.71%) , and the healthy life years lost due to premature death (YLL) was 144.23 person-years (2.29%) . Multiple linear regression analysis showed that the main factors affecting DALY were disability grade, diagnostic age, pneumoconiosis grade and length of dust exposure (P<0.05) . The total economic loss caused by 974 welder's pneumoconiosis patients was 1831838160.18 yuan, and the per capita loss was 1880737.33 yuan. Among them, the direct economic loss was 970917563.75 yuan (53.00%) , and the indirect economic loss was 860920596.43 yuan (47.00%) . Conclusion: Welder's pneumoconiosis causes serious disease burden to patients, and at the same time causes huge economic losses to individuals and society, which seriously hinders the development of society. Taking effective control measures to prevent the incidence of welder's pneumoconiosis is the key to reduce the disease burden.

Investigating the effect of welding tool length on mechanical strength of welded metallic matrix by molecular dynamics simulation.

The welding process and the properties of welding instruments may improve the mechanical performance of an item. One of these properties is the length of the welding tool. This approach has a substantial effect on the mechanical strength of the metallic matrix. The current study used molecular dynamics modeling and LAMMPS software to evaluate the effect of welding tool length on the mechanical properties of a welded Cu-Ag metallic matrix. This simulation makes use of the Lennard-Jones potential function and the embedded atom model. First, the equilibrium phase of modeled samples was verified by changing the computation of kinetic and total energies. Next, the mechanical properties of the welded matrix were studied using the stated Young's modulus and ultimate strength. The stress-strain curve of samples demonstrated that the mechanical strength of atomic samples increased as the length of the welding tool (penetration depth) increased. Numerically, by increasing the tool penetration depth of Fe tools from 2 Å to 8 Å, Young's modulus and ultimate strength of the matrixes sample increase from 34.360 GPa to 1390.84 MPa to 38.44 GPa and 1510 MPa, respectively. This suggested that the length of the Fe welding tool significantly affected the mechanical properties of the welded metallic matrix. The longer the length of Fe welding tools, the more particles were involved, and consequently, more bonds were formed among the particles. Bonding among the particles caused changes in mechanical properties, such as greater ultimate strength. This method can optimize mechanical structures and be useful in various industries.

Manganism due to occupational welding fume exposure: a case report.

Occupational exposure to manganese (Mn) primarily occurs through the inhalation of manganese-containing fumes and dust, with welding environments being significant sources of such exposure. Elevated levels of Mn in welding fumes can lead to a neurological syndrome known as manganism. A 28-yr-old male welder with 14 yr of experience, is presenting with complaints of forgetfulness, reasoning disorder, and decreased mental functions persisting for 10 yr. Three months ago, when he started working at the new workplace, he underwent employment screening conducted by the workplace physician. During this screening process, the physician identified a high whole blood Mn level of 25.9 µg/l. The diagnosis of manganism in this patient was established based on exposure to Mn and its compounds, high levels of Mn detected in the whole blood, hyperactive patellar reflexes observed during the physical examination, cranial Magnetic Resonance Imaging (MRI) findings consistent with manganism and complaints reported by the patient that are characteristic of manganism. In this report, the aim is to emphasize the significance of taking a comprehensive occupational history and to draw attention the potential health hazards associated with Mn and its compounds.

Experimental factors influencing the bioaccessibility and the oxidative potential of transition metals from welding fumes.

Inhalation of welding fumes (WFs) containing high levels of transition metals (Cr, Cu, Fe, Mn, Ni…) is associated with numerous health effects including oxidative stress. However, the measurements of the oxidative potential (OP) and bioaccessibility of WF transition metals depend on several physicochemical parameters and may be subject to several experimental artifacts. In this work, we investigated the influence of the experimental conditions that may affect the bioaccessibility of transition metals and their OP on stainless-steel WF extracts. WFs were produced using a generation bench and sampled on filters. The soluble fraction of the metals was analysed. Two different extraction fluids mimicking physiological pulmonary conditions were studied: phosphate buffer and Hatch's solution. Three extraction times were tested to determine the optimal time for a significant OPDTT using the dithiothreitol (DTT) method. The storage conditions of WFs after filter sampling such as duration, temperature and atmospheric conditions were investigated. The results indicate that experimental conditions can significantly affect the OPDTT and metal bioaccessibility analyses. Cr, Cu and Ni show higher solubility in Hatch's solution than in the phosphate buffer. Mn is highly sensitive to DTT and shows close solubility in the two fluids. An extraction time of 0.5 h in phosphate buffer allows a better sensitivity to OPDTT, probably by limiting complexations, interactions between metals and precipitation. Storage time and temperature can influence the physical or chemical evolution of the WFs, which can affect their OPDTT and Mn solubility. However, storage under N2(g) limits these changes. On-line measurements of OPDTT could provide an alternative to filter sampling to overcome these artifacts.

Explosive weld joint characteristics of Copper-Tantalum via simulation.

This report aims to examine the effects of impact velocity, impact depth, and impact orientation on the Cu-Ta weld joint of the explosive welding process via MD simulation. The findings indicate that the residual shear stress in the welded block mostly increases as the impact velocity rises. The bottom Ta block is more severely distorted than the higher Cu block due to the impact direction. During the tensile test, three stress zones can be identified including the low-stress Cu block, the high-stress Ta block, and the medium-stress weld joint in the middle of the samples. The weld joint position is lower than the median line of the welded block. The Cu-Ta welded block with 500 m/s impact velocities had the highest ultimate tensile strength (UTS) value of 6.49 GPa. With increasing impact depth, the atomic strain level, residual shear stress, and weld joint dimensions all noticeably increase. The Cu-Ta welded block with an impact depth of 7.5 Å has the greatest UTS values, measuring 11.65 GPa, because of its well-crystal structure. Changing the impact orientation does not result in a dramatic change in atomic strain. Orientation (001) vs (001) has the highest strain and stress rates. With an impact orientation of (110) vs. (111), the Cu-Ta welded block gets the highest UTS value of 8.03 GPa compared to other orientations.