Review of Core-shell structure zeolite-based catalysts for NOx emission control.

Nitrogen oxides (NOx) from diesel engine exhaust, is one of the major sources of environmental pollution. Currently, selective catalytic reduction with ammonia (NH3-SCR) is considered to be the most effective protocol for reducing NOx emissions. Nowadays, zeolite-based NH3-SCR catalysts have been industrialized and widespread used in this field. Nevertheless, with the increasingly stringent environmental regulations and implementation of the requirement of "zero emission" of diesel engine exhaust, it is extremely urgent to prepare catalysts with superior NH3-SCR activity and exceptional resistance to poisons (SO2, alkali metals, hydrocarbons, etc.). Core-shell structure zeolite-based catalysts (CSCs) have shown great promise in NH3-SCR of NOx in recent years by virtue of its relatively higher low-temperature activity, broader operation temperature window and outstanding resistance to poisons. This review mainly focuses on the recent progress of CSCs for NH3-SCR of NOx with three extensively investigated SSZ-13, ZSM-5, Beta zeolites as cores. The reaction mechanisms of resistance to sulfur poisoning, alkali metal poisoning, hydrocarbon poisoning, and hydrothermal aging are summarized. Moreover, the important role of interfacial effect between core and shell in the reaction of NH3-SCR was clarified. Finally, the future development and application outlook of CSCs are prospected.

Disentangling microbial coupled fillers mechanisms for the permeable layer optimization process in multi-soil-layering systems.

The multi-soil-layering (MSL) systems is an emerging solution for environmentally-friendly and cost-effective treatment of decentralized rural domestic wastewater. However, the role of the seemingly simple permeable layer has been overlooked, potentially holding the breakthroughs or directions to addressing suboptimal nitrogen removal performance in MSL systems. In this paper, the mechanism among diverse substrates (zeolite, green zeolite and biological ceramsite) coupled microorganisms in different systems (activated bacterial powder and activated sludge) for rural domestic wastewater purification was investigated. The removal efficiencies performed by zeolite coupled with microorganisms within 3 days were 93.8% for COD, 97.1% for TP, and 98.8% for NH4+-N. Notably, activated sludge showed better nitrification and comprehensive performance than specialized nitrifying bacteria powder. Zeolite attained an impressive 89.4% NH4+-N desorption efficiency, with a substantive fraction of NH4+-N manifesting as exchanged ammonium. High-throughput 16S rRNA gene sequencing revealed that aerobic and parthenogenetic anaerobic bacteria dominated the reactor, with anaerobic bacteria conspicuously absent. And the heterotrophic nitrification-aerobic denitrification (HN-AD) process was significant, with the presence of denitrifying phosphorus-accumulating organisms (DPAOs) for simultaneous nitrogen and phosphorus removal. This study not only raises awareness about the importance of the permeable layer and enhances comprehension of the HN-AD mechanism in MSL systems, but also provides valuable insights for optimizing MSL system construction, operation, and rural domestic wastewater treatment.

High speed enrichment of benzoylurea insecticides by hierarchical pore nitrogen doped carbon materials induced with hydrogen-bonded organic frameworks.

The high speed enrichment of benzoylurea insecticides (BUs) in complex matrices is an essential and challenging step. The present study focuses on the synthesis of a hierarchical pore nitrogen-doped carbon material for magnetic solid phase extraction (MSPE) of BUs. This material was prepared through the carbonization of a composite material ZIF-67@MCA which assembly with hydrogen-bonded organic frameworks (melamine-cyanurate, MCA) and zeolitic imidazolate framework (ZIF-67) at room temperature. The optimal adsorption effect is achieved when the mass ratio of ZIF-67 to MCA is 1/3, and the carbonization was performed at 600 °C, the such obtained carbon material was denoted as 1/3ZIF-67@MCA-DCs-600. The material was characterized with various physical methods including X-ray diffractometry (XRD), Fourier transform infrared spectrometry (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), water contact angle measurement, Raman spectrometry. 1/3ZIF-67@MCA-DCs-600 exhibits a macro-mesoporous 3D structure with a high degree of nitrogen doping and relatively large specific surface area, making it suitable for magnetic solid phase extraction (MSPE). The adsorption of BUs with concentration of 100 ng mL-1 can reach equilibrium within 5 s. The interaction between BUs and the adsorbent, facilitated by π-π stacking, hydrophobic interactions, hydrogen bonding forces, as well as the material's porosity, enables efficient extraction recoveries ranging from 45 % to 92 %. The enrichment of BUs was achieved through the establishment of an MSPE method under optimized conditions, which was further coupled with high performance liquid chromatography (HPLC) for the determination of the four BUs. The linear range spans from 5 ng ml-1 to 1000 ng ml-1 with the correlation coefficient (R2) of ≥ 0.99, Meanwhile, the detection limit for these four BUs falls within the range of 0.01 to 0.10 ng ml-1. The material exhibits good reusability and can be reused for at least 5 cycles. Inter day and intra-day precision ranges from 2.1-7.9 % and 1.0-5.4 %, respectively. The method demonstrates a high level of reliability in practical applications for the determination of BUs.

Facile Fabrication of Zeolitic Imidazolate Framework-8@Regenerated Cellulose Nanofibrous Membranes for Effective Adsorption of Tetracycline Hydrochloride.

The excessive utilization of antimicrobials in humans and animals has resulted in considerable environmental contamination, necessitating the development of high-performance antibiotic adsorption media. A significant challenge is the development of composite nanofibrous materials that are both beneficial and easy to fabricate, with the aim of improving adsorption capacity. Herein, a new kind of zeolitic imidazolate framework-8 (ZIF-8)-modified regenerated cellulose nanofibrous membrane (ZIF-8@RC NFM) was designed and fabricated by combining electrospinning and in situ surface modification technologies. Benefiting from its favorable surface wettability, enhanced tensile strength, interconnected porous structure, and relatively large specific surface area, the resulting ZIF-8@RC NFMs exhibit a relatively high adsorption capacity for tetracycline hydrochloride (TCH) of 105 mg g-1 within 3 h. Moreover, a Langmuir isotherm model and a pseudo-second-order model have been demonstrated to be more appropriate for the description of the TCH adsorption process of ZIF-8@RC-3 NFMs. Additionally, this composite fibrous material could keep a relatively stable adsorption capability under various ionic strengths. The successful fabrication of the novel ZIF-8@RC NFMs may shed light on the further development of wastewater adsorption treatment materials.

Valorizing waste activated sludge incineration ash to S-doped Fe2+@Zeolite 4A catalyst for the treatment of emerging contaminants exemplified by sulfamethoxazole.

The global attention towards waste management and valorization has led to significant interest in recovering valuable components from sludge incineration ash (SIA) for the synthesis of functional environmental materials. In this study, the SIA was converted to an S-doped Fe2+-zeolite type catalyst (FZA) for the treatment of emerging contaminants (ECs), exemplified by sulfamethoxazole (SMX). Results demonstrate that FZA effectively catalyzed the activation of peracetic acid (PAA), achieving a remarkable degradation of 99.8% under optimized conditions. Mechanistic investigations reveal that the FZA/PAA system can generate ·OH, 1O2, O2·ï¼, and Fe(Ⅳ), with ·OH playing a dominant role in ECs degradation. Additionally, the doped S facilitated electrochemical performance, Fe2+ regeneration and fixation in FZA. Practical application elucidated that the FZA/PAA system can work in complex environments to degrade various ECs without generating high-toxicity ingredients. Overall, valorizing SIA to FZA provides dual achievement in waste management and ECs removal.

Aggregation-Induced Electrochemiluminescence of Ir(ppy)3-Functionalized ZIF-8 for Microcystin-LR Detection via the trans-Cleavage Activity of CRISPR-Cas12a.

An efficient electrochemiluminescence (ECL) emitter, Ir(ppy)3-based molecules has recently been reported to exhibit aggregation-induced electrochemiluminescence (AIECL) phenomenon. However, it remains a significant challenge to control the aggregation states of these molecules and achieve uniform aggregates with intense ECL emission. In this work, a biosensor was developed to detect microcystin-LR (MC-LR) based on Ir(ppy)3-functionalized zeolitic imidazolate framework-8 (Ir-ZIF-8) as the ECL emitter and the trans-cleavage activity of CRISPR-Cas12a as the methodological strategy. The Ir-ZIF-8, a functional metal-organic framework (MOF), exhibited the AIECL phenomenon via the spatial domain-limiting effect of encapsulating Ir(ppy)3 into the mesopores of ZIF-8, while the porosity and highly ordered topological structure of ZIF-8 effectively limited the molecular motion of Ir(ppy)3. CRISPR-Cas12a was employed to indiscriminately cleave double-stranded DNA decorated with carboxy tetramethylrhodamine (TAMRA), which quenched the ECL signal of Ir-ZIF-8 by resonance energy transfer and then separated the quencher from Ir-ZIF-8 to reactivate the signal. The concentration of MC-LR was designed to correlate with both the quencher amount and the activity of Cas12a. Then, two linear regression equations for MC-LR detection were constructed to improve the accuracy of the biosensor, and the constructed biosensor showed remarkable reproducibility, stability, and selectivity. The accurate detection of MC-LR with limits of detection of 1.2 and 5.9 pg/mL was made possible by the high quenching efficiency of TAMRA and the effective cutting ability of the editable CRISPR-Cas12a system.

Enhanced and robust nitrogen removal using an integrated zeolite and partial denitrification anammox process.

Anammox has received increased attention due to its enhanced and cost-efficient approach to nitrogen removal. However, its practical application is complicated by strict influent NO2--N to NH4+-N ratio demands and an 11% nitrate production from the anammox process. This study was the first known research to propose and verify a system of zeolite integrated with partial denitrification and anammox (Z-PDA) in an up-flow anaerobic sludge bed (UASB) reactor. The enhanced and robust nitrogen removal resulted in an ultra-high nitrogen removal efficiency (NRE, 93.0 ± 2.0%). Zeolite adsorption and biological desorption of ammonium contributed to robust nitrogen removal with fluctuating influent NO2--N to NH4+-N ratios. Applying 16S rRNA gene sequencing found that Candidatus Brocadia and Thauera were the key bacteria responsible for anammox and partial denitrification (PD), respectively. Zeolite also acted as a biological carrier. This significantly enriched anammox bacteria with a higher relative abundance of Candidatus Brocadia, reaching 49.2%. Metagenomic analysis demonstrated that the multiple functional genes related to nitrogen removal (nrfA/H, narG/H/I) and the metabolic pathways (Biosynthesis of cofactors, the Two-component system, the Biosynthesis of nucleotide sugars, and Purine metabolism) ensured the resilience of the Z-PDA system despite influent fluctuations. Overall, this study provided novel insights into the impacts of zeolite in the PDA system. It described the fundamental mechanism of zeolite based on adsorption and biological desorption, and demonstrated a meaningful application of the anammox process in sewage treatment.

Synergistic Procoagulant Mechanism and Application of Kaolin-Zeolite Composite Hemostat for Effective Hemorrhage Control.

Achieving timely and effective hemorrhage control is imperative for the survival of individuals with severe bleeding. Hemostatic materials, by enhancing the natural cell-based coagulation response, are essential tools in modern and military medical practice for controlling bleeding, especially in emergency and surgical settings. Here, we report a new type of composite hemostatic material with two different aluminosilicate-based components, kaolin and zeolite, which synergistically work together in different stages of the coagulation cascade reactions. Kaolin can effectively activate the clotting factor FXII in the early stage, and zeolite can accumulate and assemble FXa and FVa on its surface and thereafter lead to the formation of highly active thrombin in the later stage. The synergistic action mechanism between kaolin and zeolite significantly boosts the levels of FXIIa and FXa, and it also greatly enhances plateau thrombin activity. For practical application, a kaolin-modified zeolite gauze is fabricated, and it demonstrates excellent hemostatic effectiveness. Compared to the combat gauze currently used in front-line treatment, it reduces blood loss by 75% and shortens hemostasis time by 33% in a rabbit femoral artery injury model. In addition, this kaolin-zeolite gauze has no heat release problem and a nearly zero particle shedding rate, which greatly decreases the safety risk compared to current commercial inorganic-based hemostatic gauzes.

Synthesis of novel composite material with spent coffee ground biochar and steel slag zeolite for enhanced dye and phosphate removal.

Rising concerns over water scarcity, driven by industrialization and urbanization, necessitate the need for innovative solutions for wastewater treatment. This study focuses on developing an eco-friendly and cost-effective biochar-zeolite composite (BZC) adsorbent using waste materials-spent coffee ground biochar (CGB) and steel slag zeolite (SSZ). Initially, the biochar was prepared from spent coffee ground, and zeolite was prepared from steel slag; their co-pyrolysis resulted in novel adsorbent material. Later, the physicochemical characteristics of the BZC were examined, which showed irregular structure and well-defined pores. Dye removal studies were conducted, which indicate that BZC adsorption reach equilibrium in 2 h, exhibiting 95% removal efficiency compared to biochar (43.33%) and zeolite (74.58%). Moreover, the removal efficiencies of the novel BZC composite toward dyes methyl orange (MO) and crystal violet (CV) were found to be 97% and 99.53%, respectively. The kinetic studies performed with the dyes and phosphate with an adsorbent dosage of 0.5 g L-1 suggest a pseudo-second-order model. Additionally, the reusability study of BZC proves to be effective through multiple adsorption and regeneration cycles. Initially, the phosphate removal remains high but eventually decreases from 92% to 70% in the third regeneration cycle, highlighting the robustness of the BZC. In conclusion, this study introduces a promising, cost-effective novel BZC adsorbent derived from waste materials as a sustainable solution for wastewater treatment. Emphasizing efficiency, reusability, and potential contributions to environmentally conscious water treatment, the findings highlight the composite's significance in addressing key challenges for the removal of toxic pollutants from the aqueous solutions. PRACTITIONER POINTS: A novel biochar-zeolite composite (BZC) material has been synthesized. Excellent removal of dyes by BZC (~95%) was achieved as compared to their counterparts The kinetic studies performed suggest a pseudo-second-order model. BZC proves to be highly effective for multiple adsorption studies. Excellent reusability showed potential as a robust adsorbent.

Precision Treatment of Colon Cancer Using Doxorubicin-Loaded Metal-Organic-Framework-Coated Magnetic Nanoparticles.

Due to the limited efficacy and evident side effects of traditional chemotherapy drugs attributed to their lack of specificity and selectivity, novel strategies are essential for improving cancer treatment outcomes. Here, we successfully engineered Fe3O4 magnetic nanoparticles coated with zeolitic imidazolate framework-8 (ZIF-8). The resulting nanocomposite (Fe3O4@ZIF-8) demonstrates efficient adsorption of a substantial amount of doxorubicin (DOX) due to the porous nature of ZIF-8. The drug-loaded nanoparticles, Fe3O4@ZIF-8/DOX, exhibit significant accumulation at the tumor site in SW620 colon-cancer-bearing mice when guided by an external magnetic field. Within the acidic microenvironment of the tumor, the ZIF-8 framework collapses, releasing DOX and effectively inducing tumor cell death, thereby inhibiting cancer progression while not causing undesired side effects, as confirmed by a variety of in vitro and in vivo characterizations. In comparison to free DOX, Fe3O4@ZIF-8/DOX nanoparticles show superior efficacy in colon cancer treatment. Our findings suggest that Fe3O4@ZIF-8 holds promise as a carrier for small-molecule drug adsorption and its ferromagnetic properties provide drug targeting capabilities, thereby enhancing therapeutic effects on tumors at the same drug dosage. With excellent biocompatibility, Fe3O4@ZIF-8 demonstrates potential as a drug carrier in targeted cancer chemotherapy. Our work suggests that a combination of magnetic targeting and acid-responsiveness holds great promise for advancing targeted cancer therapy in precision nanomedicine.

New zeolite-based composite pads with high-volume blood absorption for early warning of postpartum hemorrhage.

Medical treatment of severe blood loss during labor is crucial, and the early warning indicator of postpartum hemorrhage (PPH) is essential for labor medical treatment. Measurement of blood loss conventionally looks dirty, reluctant, and less hygienic since some of the blood might be spilled out in the maternity bed, while commercially existing pads have low blood absorption capacity. A new design composite pad composed of absorbent materials, including cellulose rayon, super absorbent polymer (SAP), and zeolite was fabricated and characterized. The SAP and zeolite show properties as crystalline and amorphous materials, respectively. The surface area of natural zeolite was 19.79 (m2/g). The newly fabricated composite pad showed a high blood absorption capacity (>500-600 mL) with a blood absorption rate of 55.56-85.84 mL/min (depending on the blood volume), showing better performance as compared to the commercial pads. These characteristics suggest that the new composite pad could function not only as a sanitary pad but also as an early warning indicator for PPH if the rate and blood volume reach the dangerous category (≥600 mL or at ≥13 mL/min rate).

Developing a novel calcium silver zeolite for caries management.

OBJECTIVE: To develop a novel calcium silver zeolite (Ca-Ag-Zeo) and assess its biocompatibility, physiochemical properties and antimicrobial effects. METHODS: Ca-Ag-Zeo was synthesized using ion-exchange method with calcium chloride, silver nitrate and Zeolite X (Zeo). Silver zeolite X (Ag-Zeo) and Zeo were set as control. The chemical structure, morphology, crystal structure and elemental composition of Ca-Ag-Zeo was characterized by X-ray diffraction spectrum, scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy, respectively. Its biocompatibility on the human gingival fibroblasts was assessed by cell counting kit-8 assay. Its physiochemical properties were determined by the released calcium and silver ion using Inductive Coupled Plasma Emission Spectrometry for up to 12 weeks. The antimicrobial properties on Streptococcus mutans, Lactobacillus acidophilus, Lactobacillus casei, and Candida albicans were assessed by minimum bactericidal concentration (MBC) or minimum fungicidal concentration (MFC) assay. RESULTS: Ca-Ag-Zeo with a hexagonal cage structure was synthesized. As for biocompatibility, the half-maximal inhibitory concentration (± SD in mg/mL) of Ca-Ag-Zeo, Ag-Zeo and Zeo in human gingival fibroblasts were 0.52 ± 0.05, 0.15 ± 0.01 and 3.35 ± 0.58, respectively (Zeo > Ca-Ag-Zeo > Ag-Zeo; p < 0.05). As for physiochemical properties, the accumulated ion release (± SD in mg) of Ca-Ag-Zeo, Ag-Zeo and Zeo were 0.011 ± 0.003, 0 and 0 for calcium ion, respectively (Ca-Ag-Zeo > Ag-Zeo, Zeo; p < 0.001), and 0.213 ± 0.032, 0.209 ± 0.019 and 0 for silver ion, respectively (Ca-Ag-Zeo, Ag-Zeo > Zeo; p < 0.001). As for anti-microbial ability, the MBC/MFC (mg/mL) of Ca-Ag-Zeo, Ag-Zeo and Zeo were 32, 16 and > 256 against Streptococcus mutans; 32, 16, > 256 against Lactobacillus acidophilus; 16, 16, and 256 against Lactobacillus casei; 0.25, 0.125; and 2, 1, > 256 against Candida albicans, respectively. CONCLUSION: A novel Ca-Ag-Zeo was developed. It presented better biocompatibility compared to Ag-Zeo. It released calcium and silver ions sustainably, and it could inhibit the growth of common cariogenic microorganisms.

Effects of silicate stabilizers on cadmium reduction and the quality of rice grains in acidic paddy soil.

Silicate has been proven to be highly-effective at immobilizing soil heavy metals, but the effects of silicate stabilizers on rice grain cadmium (Cd) reduction and rice quality under field conditions are not clear. In this study, a field experiment was conducted over three consecutive years was conducted to examine the Cd reduction in rice grains and to reveal the potential effects of silicate stabilizers on rice grain nutrients, by setting different amounts of bentonite (B), silica‒calcium fertilizer (SC) and zeolite powder (ZP). The results revealed that the application of the B, SC and ZP significantly decreased the soil CaCl2‒Cd concentration (> 39%) and significantly reduced the grain Cd concentration in both early rice (> 70%) and late rice (> 18%) under field conditions; the silicate stabilizers reduced the soil available iron (Fe) but did not limit rice grain Fe nutrition. Additionally, the three silicates promoted rice yield and improved the rice grain Ca and Mg contents; and the application of B increased the amylose concentration of the late rice grains. In conclusion, high amounts of silicate stabilizers did not adversely influence the soil conventional nutrient indices, rice minerals or rice taste, but changes in rice selenium content need attention. Overall, in comparison with lime, silicate stabilizers can improve not only the safety of rice but also the nutritional and taste qualities of rice and are more eco-friendly for long-term use in soil.

ZIF-8 as a pH-Responsive Nanoplatform for 5-Fluorouracil Delivery in the Chemotherapy of Oral Squamous Cell Carcinoma.

5-fluorouracil (5-FU), a chemotherapeutic agent against oral squamous cell carcinoma (OSCC), is limited by poor pharmacokinetics and toxicity. The pH-sensitive zeolite imidazolate framework-8 (ZIF-8) may increase the selectivity and length of 5-FU released into the acidic tumor microenvironment. This study examined the in vitro 5-FU absorption and release profiles of ZIF-8, and then progressed to cytotoxicity assays using the OSCC primary cell line SCC7. The 5-FU loading capacity of ZIF-8 was calculated with UV-vis spectroscopy (λ = 260 nm). 5-FU release was quantified by submerging 5-FU@ZIF-8 in pH 7.4 and 5.5 acetate buffer over 48 h. For the cytotoxicity assays, 5-FU, ZIF-8, and 5-FU@ZIF-8 were added to SCC7 cultures at 25, 50, and 100 µg/mL. Cell viability was assessed through toluidine blue staining and further quantified through transcriptomic RNA sequencing. ZIF-8 stabilized at a maximum absorption of 2.71 ± 0.22 mg 5-FU, and released 0.66 mg more 5-FU at pH 5.5 than 7.4 for at least 72 h. The cytotoxicity assays showed that 5-FU@ZIF-8 had a synergistic inhibitory effect at 50 µg/mL. The RNA sequencing analysis further revealed the molecular targets of 5-FU@ZIF-8 in SCC7. 5-FU@ZIF-8 may release 5-FU based on the pH of the surrounding microenvironments and synergistically inhibit OSCC.

Noble metal-free plasmonic Cu/WO3-x@ZNC bi-functional composite for ciprofloxacin photocatalytic degradation and photothermal water evaporation via visible-infrared exposure.

Herein, coupling of noble metal-free plasmonic copper nanoparticles with tungsten suboxide and supporting on zeolite nanoclay (Cu/WO3-x@ZNC) composite will be introduced for bi-functional photocatalytic ciprofloxacin (CIP) degradation and water photothermal evaporation under visible/infrared (Vis/IR) exposure. Reduced band-gap of WO3-x via oxygen vacancies creation and localized surface plasmon resonance (LSPR) formation by Cu nanoparticles contributed significantly the extension and intensification of composite's photo-absorption range. Furthermore, small mesoporous structure of ZNC enhanced CIP adsorption and charge carriers separation where the reported photocatalytic efficiencies were 88.3 and 81.7% upon IR and Vis light exposure respectively. It was evidenced that plasmonic hot electrons (e-.s) and hydroxyl radicals (OH•-) performed the basic functions of the photocatalytic process. At the other side, oxygen vacancies existence, plasmonic effect, and confining thermal characteristics of WO3-x, Cu, and ZNC correspondingly induced water photothermal evaporation with efficiencies up to 97.5 and 72.8% under IR and Vis illumination respectively. This work introduces synthesis of a novel bi-functional photocatalytic-photothermal composite by metal sub-oxide and non-noble metal plasmonic coupling and supporting on naturally-derived carrier for water restoration under broad spectral exposure.

Multifunctional EGCG@ZIF-8 Nanoplatform with Photodynamic Therapy/Chemodynamic Therapy Antibacterial Properties Promotes Infected Wound Healing.

Damaged skin is susceptible to invasion by harmful microorganisms, especially Staphylococcus aureus and Escherichia coli, which can delay healing. Epigallocatechin-3-gallate (EGCG) is a natural compound known for effectively promoting wound healing and its potent anti-inflammatory effects. However, its application is limited due to its susceptibility to oxidation and isomerization, which alter its structure. The use of zeolitic imidazolate framework-8 (ZIF-8) can effectively tackle these issues. This study introduces an oxygen (O2) and hydrogen peroxide (H2O2) self-supplying ZIF-8 nanoplatform designed to enhance the bioavailability of EGCG, combining photodynamic therapy (PDT) and chemodynamic therapy (CDT) to improve antibacterial properties and ultimately accelerate wound healing. For this purpose, EGCG and indocyanine green (ICG), a photosensitizer, were successively integrated into a ZIF-8, and coated with bovine serum albumin (BSA) to enhance biocompatibility. The outer layer of this construct was further modified with manganese dioxide (MnO2) to promote CDT and calcium peroxide (CaO2) to supply H2O2 and O2, resulting in the final nanoplatform EGCG-ICG@ZIF-8/BSA-MnO2/CaO2 (EIZBMC). In in vitro experiments under 808 nm laser, EIZBMC exhibited synergistic antibacterial effects through PDT and CDT. This combination effectively released reactive oxygen species (ROS), which mediated oxidative stress to inhibit the bacteria. Subsequently, in a murine model of wound infection, EIZBMC not only exerted antibacterial effects through PDT and CDT but also alleviated the inflammatory condition and promoted the regeneration of collagen fibers, which led to accelerated wound healing. Overall, this research presents a promising approach to enhancing the therapeutic efficacy of EGCG by leveraging the synergistic antibacterial effects of PDT and CDT. This multifunctional nanoplatform maximizes EGCG's anti-inflammatory properties, offering a potent solution for promoting infected wound healing.

Tuning the morphology and textural properties of ZSM-5 additive for co-cracking of waste plastics with vacuum gas oil to light olefins.

Typical cracking catalysts, called equilibrium catalyst (E-Cat) are ultra-stable Y (USY) zeolite often used with 15% commercial ZSM-5 zeolite additive (ZSM-5(COM)) to boost olefin yield. In this study, similar additive zeolites with different pore sizes and acidic character were synthesized by rapid ageing of precursor solution and used in the co-cracking of low-density polyethylene (LDPE) and heavy vacuum gas oil (HVGO). Three ZSM-5 zeolites additives with Si/Al ratio 25 (ZSM-5(25)), 50 (ZSM-5(50)) and 75 (ZSM-5(75)) were synthesized and combined with E-Cat to form E-Cat/ZSM-5(25), E-Cat/ZSM-5(50) and E-Cat/ZSM-5(75) respectively. The E-Cat/ZSM-5(50) has slightly better endothermic conversion (cracking) of a mixture of dissolved LDPE and HVGO into H2, C1 to C4 gases and C2-C4 light olefins (total conversion of E-Cat 80.0%, E-Cat/ZSM-5(COM) 75.0% and E-Cat/ZSM-5(50) 83.7% respectively), with different gas, liquid and coke distributions. The E-Cat/ZSM-5(75) has 81% conversion, and highest yield of light olefins (38.4%). Structural (surface area, pore size) and chemical (acid sites) characteristics of the synthetized ZSM-5(75) zeolite explain the observed higher light olefin selectivity by different and competing catalytic routes. The ZSM-5(75) has demonstrated to be a good zeolite additive for converting dissolved plastic in HVGO into light olefins.

Feeding or pen surface application of clinoptilolite with different particle sizes: impact on nitrogen utilization and manure ammonia emissions in feedlot cattle.

This study investigated the effects of feeding clinoptilolite (CLN; 2.5% of diet dry matter) with a particle size of either 30- or 400-µm on ruminal fermentation characteristics, measures of nitrogen (N) utilization, and manure ammonia-N (NH3) emissions in feedlot cattle. The impact of directly applying 30- or 400-µm CLN to the pen surface (2,250 kg/ha) on manure NH3-N emissions was also evaluated. Six beef heifers were used in a replicated 3 × 3 Latin square design with 21-d periods. Dietary treatments were 1) finishing ration with no supplement (CON), 2) CON + 30-µm CLN (CLN-30), and 3) CON + 400-µm CL (CLN-400). Intake was measured daily. To evaluate fermentation characteristics, ruminal fluid was collected on day 19. Indwelling pH loggers were used to measure ruminal pH from days 15 to 21. Blood was collected 3-h post-feeding on day 21 for metabolite analysis. Fecal grab and urine spot samples were also collected from days 19 to 21 to measure nutrient digestibility, route of N excretion, and in vitro NH3 emissions. There was no diet effect (P ≥ 0.12) on nutrient intake and apparent total tract digestibility, and ruminal short-chain fatty acid profile and pH. Ruminal NH3 concentration, which was lower (P = 0.04) for CLN-30 than CON heifers, did not differ between CON and CLN-400 heifers. Although there was no diet effect (P = 0.50) on plasma urea-N (PUN) concentration, proportion of urea-N excreted in urine was lower (P = 0.01) for CLN-30 than CON and CLN-400 heifers. Urinary NH3-N excretion, which was greater (P ≤ 0.04) for CLN-400 than CON heifers, did not differ between CLN-30 and CLN-400 heifers. Feeding CLN also increased (P ≤ 0.02) fecal excretion of potassium (K) and iron (Fe) and reduced (P = 0.01) urinary excretion of calcium (Ca). There was a treatment × time interaction (P = 0.01) for NH3 emission rate, which was greatest within the first 36 h of incubation and was lower for manure from CLN-400 compared to CON and CLN-30 heifers and pen surface application treatments. Cumulative NH3 emissions were lower (P < 0.01) for manure from CLN-400 compared to CON and CLN-30 heifers and the pen surface application treatments. Although surface application was ineffective, feeding 400-µm CLN to finishing cattle could result in a beneficial decrease in manure NH3 emissions. However, changes in fecal and urine excretion of minerals like K and Ca, which suggest a decrease in bioavailability, need to be considered when feeding CLN in finishing cattle diets.

There is interest in developing strategies that limit ammonia emissions from confined feeding operations, as it leads to both air and water pollution. Feeding zeolites like clinoptilolite (CLN) or directly applying them to pen surfaces to bind ammonia represents possible mitigation strategies. Although this could impact its effectiveness, there still is limited information on whether the particle size of CLN influences the binding of ammonia when fed or surface applied. Therefore, this study evaluated the effects of feeding supplemental CLN with a small (30-µm) or large particle size (400-µm) to finishing cattle on ruminal fermentation parameters, route of nitrogen excretion, and manure ammonia emissions. We also evaluated the effects of applying 30- and 400-µm CLN directly to the pen surface on manure ammonia emissions. Only CLN with the small particle size (30 µm) was effective in binding ruminal ammonia, which reduced the amount of urea excreted in urine. However, ammonia emissions were only lower for manure from finishing cattle fed CLN with the large particle size. Applying CLN to the pen surface was not effective in reducing ammonia emissions. There were also indications that fed CLN reduced bioavailability of potassium and iron.

Benchmarking produced water treatment strategies for non-toxic effluents: Integrating thermal distillation with granular activated carbon and zeolite post-treatment.

The management of produced water (PW) generated during oil and gas operations requires effective treatment and comprehensive chemical and toxicological assessment to reduce the environmental risks associated with reuse or discharge. This study evaluated a treatment train that included a low-temperature thermal distillation pilot system followed by granular activated carbon (GAC) and zeolite post-treatment for processing hypersaline Permian Basin PW. Our study provides a unique and comprehensive assessment of the treatment efficiency considering a targeted chemical scheme together with whole effluent toxicity (WET) tests across four trophic levels regarding aquatic critical receptors of concern (ROC): Raphidocelis subcapitata, Vibrio fischeri, Ceriodaphnia dubia, and Danio rerio. The distillate from the thermal distillation process met various numeric discharge standards for salinity and major ions. However, it did not meet toxicity requirements established by the United States National Pollutant Discharge Elimination System program. Subsequent post-treatment using GAC and zeolite reduced the concentration of potential stressors, including volatile organics, NH3, Cd, Cr, Zn, and Mn in the final effluent to below detection limits. This resulted in a consistent toxicity reduction across all WET tests, with no observable adverse effects for R. subcapitata, C. dubia, and D. rerio (no observed effect concentration >100%), and V. fischeri effects reduced to 19%. This study realizes the feasibility of treating PW to non-toxic levels and meeting reuse and discharge requirements. It underscores the importance of implementing integrated treatment trains to remove the contaminants of concern and provides a systematic decision framework to predict and monitor environmental risks associated with PW reuse.

Achieving nitrite shunt using in-situ free ammonia enriched by natural zeolite: Pilot-scale mainstream anammox with flexible nitritation strategy.

The mainstream partial nitritation/anammox (PN/A) process represents a significant innovation in decarbonizing municipal wastewater treatment. However, its implementation is considerably hampered by the challenge of stable nitrite supply. In this study, a pilot-scale PN/A system receiving real sewage (20 m3) was operated at room temperature for nearly one year. Remarkable PN performance with relatively high nitrite accumulation ratio of 75.04 ± 10.05 % was obtained via in-situ free ammonia (FA) strategy. The ammonium concentration enriched in the zeolite increased significantly by 548.8 times compared to that in the aqueous phase by ion exchange. This substantial increase robustly inhibited nitrite-oxidizing bacteria (NOB), resulting in high relative abundance ratio of ammonia-oxidizing bacteria (AOB) to NOB of 37.93 ± 12.61 in the zeolite biofilm, compared to 10.22 ± 1.67 in suspended floc sludge. The significant differences in FA concentrations between zeolite biofilm and suspended floc sludge resulted in distinct spatial distribution disparities of AOB and NOB, which were central to achieving stable nitrite accumulation without complex multiple selective pressures. Consequently, compliant effluent with total nitrogen of 10.91 ± 4.23 mg N/L was achieved at 10.4-31.1 °C without external carbon source addition. The biocarriers in the anammox process played a key role in enhancing functional genes and electron flow, supporting anammox-dominated nitrogen removal. This study presents a flexible and adaptable strategy for mainstream nitrite shunting, highlighting its potential for large-scale implementation of mainstream anammox treatment.