Disentangling microbial coupled fillers mechanisms for the permeable layer optimization process in multi-soil-layering systems.

The multi-soil-layering (MSL) systems is an emerging solution for environmentally-friendly and cost-effective treatment of decentralized rural domestic wastewater. However, the role of the seemingly simple permeable layer has been overlooked, potentially holding the breakthroughs or directions to addressing suboptimal nitrogen removal performance in MSL systems. In this paper, the mechanism among diverse substrates (zeolite, green zeolite and biological ceramsite) coupled microorganisms in different systems (activated bacterial powder and activated sludge) for rural domestic wastewater purification was investigated. The removal efficiencies performed by zeolite coupled with microorganisms within 3 days were 93.8% for COD, 97.1% for TP, and 98.8% for NH4+-N. Notably, activated sludge showed better nitrification and comprehensive performance than specialized nitrifying bacteria powder. Zeolite attained an impressive 89.4% NH4+-N desorption efficiency, with a substantive fraction of NH4+-N manifesting as exchanged ammonium. High-throughput 16S rRNA gene sequencing revealed that aerobic and parthenogenetic anaerobic bacteria dominated the reactor, with anaerobic bacteria conspicuously absent. And the heterotrophic nitrification-aerobic denitrification (HN-AD) process was significant, with the presence of denitrifying phosphorus-accumulating organisms (DPAOs) for simultaneous nitrogen and phosphorus removal. This study not only raises awareness about the importance of the permeable layer and enhances comprehension of the HN-AD mechanism in MSL systems, but also provides valuable insights for optimizing MSL system construction, operation, and rural domestic wastewater treatment.

Review of Core-shell structure zeolite-based catalysts for NOx emission control.

Nitrogen oxides (NOx) from diesel engine exhaust, is one of the major sources of environmental pollution. Currently, selective catalytic reduction with ammonia (NH3-SCR) is considered to be the most effective protocol for reducing NOx emissions. Nowadays, zeolite-based NH3-SCR catalysts have been industrialized and widespread used in this field. Nevertheless, with the increasingly stringent environmental regulations and implementation of the requirement of "zero emission" of diesel engine exhaust, it is extremely urgent to prepare catalysts with superior NH3-SCR activity and exceptional resistance to poisons (SO2, alkali metals, hydrocarbons, etc.). Core-shell structure zeolite-based catalysts (CSCs) have shown great promise in NH3-SCR of NOx in recent years by virtue of its relatively higher low-temperature activity, broader operation temperature window and outstanding resistance to poisons. This review mainly focuses on the recent progress of CSCs for NH3-SCR of NOx with three extensively investigated SSZ-13, ZSM-5, Beta zeolites as cores. The reaction mechanisms of resistance to sulfur poisoning, alkali metal poisoning, hydrocarbon poisoning, and hydrothermal aging are summarized. Moreover, the important role of interfacial effect between core and shell in the reaction of NH3-SCR was clarified. Finally, the future development and application outlook of CSCs are prospected.

Assessing biochar, clinoptilolite zeolite and zeo-char loaded nano-nitrogen for boosting growth performance and biochemical ingredients of peace lily (Spathiphyllum Wallisii) plant under water shortage.

BACKGROUND: Peace lily (Spathiphyllum wallisii Regel) is an ornamental indoor plant with promising cut flower market, as well as antiviral, pharmacological and ecological potentials. Water deficiency can have sound effects on the growth performance and aesthetic quality of such plant. The aim of this study was to investigate the consequences of zeolite, biochar, and zeo-char loaded nano-nitrogen application on the growth performance and biochemical components of peace lily under water shortage conditions. An experiment was conducted over two consecutive seasons (2021-2022) at the experimental nursery of Ornamental Horticulture Department, Faculty of Agriculture, Cairo University, Giza, Egypt. Soil amendments; zeolite, biochar, and zeo-char loaded nano-nitrogen were prepared and applied to soil before cultivation. RESULTS: Our results revealed that the new combination treatment (zeo-char loaded nano-N) had an exceeding significant effect on most of the studied parameters. Vegetative traits such as plant height (35.7 and 35.9%), leaf number per plant (73.3 and 52.6%), leaf area (40.2 and 36.4%), stem diameter (28.7 and 27.1%), root number (100 and 43.5%) and length (105.7 and 101.9%) per plant, and fresh weight of leaves (23.2 and 21.6%) were significantly higher than control (commercially recommended dose of NPK) with the application of zeo-char loaded nano-N during the two growing seasons, respectively. Similar significant increments were obtained for some macro- (N, P, K, Mg, Ca) and micro- (Fe, Zn, Mn) elements with the same treatment relative to control. Chlorophyll (18.4%) and total carotenoids (82.9 and 32.6%), total carbohydrates (53.3 and 37.4%), phenolics (54.4 and 86.9%), flavonoids (31.7% and 41.8%) and tannins (69.2 and 50%), in addition to the phytohormone gibberellic acid (GA3) followed the same trend with the application of zeo-char loaded nano-N, increasing significantly over control. Leaf histological parameters and anatomical structure were enhanced with the new combination treatment in comparison with control. Antioxidant enzymes (catalase and peroxidase), proline and abscisic acid (ABA) exhibited significant declines with zeo-char loaded nano-N treatment relative to control. CONCLUSION: These findings suggest that incorporating soil amendments with nano- nutrients could provide a promising approach towards improving growth performance and quality of ornamental, medicinal and aromatic species under water deficiency conditions.

Facile synthesis of Fe-doped ZIF-8 and its adsorption of phosphate from water: Performance and mechanism.

To remove phosphate from water, a novel Fe-doped ZIF-8 was synthesized as a superior adsorbent. The Fe-doped ZIF-8 was fully characterized using different characterization techniques and it was found that the as-prepared Fe-doped ZIF-8 (denoted as ZIF-(2Zn:1Fe)) showed a polyhedral morphology with a large specific surface area of 157.64 m2/g and an average pore size of 3.055 nm. Analyses using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction showed that Fe atoms were successfully incorporated into the ZIF-8 skeleton. Batch experiments demonstrated that the molar ratio of Fe and Zn has effects on phosphate adsorption. The adsorption kinetics conformed to a pseudo-second-order model with a high correlation coefficient (R2 = 0.9983). The adsorption isotherm matched the Langmuir model (R2 = 0.9994) better than the Freundlich model (R2 = 0.7501), suggesting that the adsorption of phosphoric acid by ZIF-(2Zn:1Fe) can be classified as a chemisorption on a homogeneous surface. The adsorption amount was 38.60 mg/g. It was found that acidic environments favored the adsorption reaction and the best adsorption was achieved at an initial pH of 2. Inhibition of adsorption by common anions is NO3-> CO32-> SO42-> Cl-. Characterization results indicate that the main mechanism of adsorption is surface complexation interactions.

Valorizing waste activated sludge incineration ash to S-doped Fe2+@Zeolite 4A catalyst for the treatment of emerging contaminants exemplified by sulfamethoxazole.

The global attention towards waste management and valorization has led to significant interest in recovering valuable components from sludge incineration ash (SIA) for the synthesis of functional environmental materials. In this study, the SIA was converted to an S-doped Fe2+-zeolite type catalyst (FZA) for the treatment of emerging contaminants (ECs), exemplified by sulfamethoxazole (SMX). Results demonstrate that FZA effectively catalyzed the activation of peracetic acid (PAA), achieving a remarkable degradation of 99.8% under optimized conditions. Mechanistic investigations reveal that the FZA/PAA system can generate ·OH, 1O2, O2·ï¼, and Fe(Ⅳ), with ·OH playing a dominant role in ECs degradation. Additionally, the doped S facilitated electrochemical performance, Fe2+ regeneration and fixation in FZA. Practical application elucidated that the FZA/PAA system can work in complex environments to degrade various ECs without generating high-toxicity ingredients. Overall, valorizing SIA to FZA provides dual achievement in waste management and ECs removal.

Aggregation-Induced Electrochemiluminescence of Ir(ppy)3-Functionalized ZIF-8 for Microcystin-LR Detection via the trans-Cleavage Activity of CRISPR-Cas12a.

An efficient electrochemiluminescence (ECL) emitter, Ir(ppy)3-based molecules has recently been reported to exhibit aggregation-induced electrochemiluminescence (AIECL) phenomenon. However, it remains a significant challenge to control the aggregation states of these molecules and achieve uniform aggregates with intense ECL emission. In this work, a biosensor was developed to detect microcystin-LR (MC-LR) based on Ir(ppy)3-functionalized zeolitic imidazolate framework-8 (Ir-ZIF-8) as the ECL emitter and the trans-cleavage activity of CRISPR-Cas12a as the methodological strategy. The Ir-ZIF-8, a functional metal-organic framework (MOF), exhibited the AIECL phenomenon via the spatial domain-limiting effect of encapsulating Ir(ppy)3 into the mesopores of ZIF-8, while the porosity and highly ordered topological structure of ZIF-8 effectively limited the molecular motion of Ir(ppy)3. CRISPR-Cas12a was employed to indiscriminately cleave double-stranded DNA decorated with carboxy tetramethylrhodamine (TAMRA), which quenched the ECL signal of Ir-ZIF-8 by resonance energy transfer and then separated the quencher from Ir-ZIF-8 to reactivate the signal. The concentration of MC-LR was designed to correlate with both the quencher amount and the activity of Cas12a. Then, two linear regression equations for MC-LR detection were constructed to improve the accuracy of the biosensor, and the constructed biosensor showed remarkable reproducibility, stability, and selectivity. The accurate detection of MC-LR with limits of detection of 1.2 and 5.9 pg/mL was made possible by the high quenching efficiency of TAMRA and the effective cutting ability of the editable CRISPR-Cas12a system.

Facile Fabrication of Zeolitic Imidazolate Framework-8@Regenerated Cellulose Nanofibrous Membranes for Effective Adsorption of Tetracycline Hydrochloride.

The excessive utilization of antimicrobials in humans and animals has resulted in considerable environmental contamination, necessitating the development of high-performance antibiotic adsorption media. A significant challenge is the development of composite nanofibrous materials that are both beneficial and easy to fabricate, with the aim of improving adsorption capacity. Herein, a new kind of zeolitic imidazolate framework-8 (ZIF-8)-modified regenerated cellulose nanofibrous membrane (ZIF-8@RC NFM) was designed and fabricated by combining electrospinning and in situ surface modification technologies. Benefiting from its favorable surface wettability, enhanced tensile strength, interconnected porous structure, and relatively large specific surface area, the resulting ZIF-8@RC NFMs exhibit a relatively high adsorption capacity for tetracycline hydrochloride (TCH) of 105 mg g-1 within 3 h. Moreover, a Langmuir isotherm model and a pseudo-second-order model have been demonstrated to be more appropriate for the description of the TCH adsorption process of ZIF-8@RC-3 NFMs. Additionally, this composite fibrous material could keep a relatively stable adsorption capability under various ionic strengths. The successful fabrication of the novel ZIF-8@RC NFMs may shed light on the further development of wastewater adsorption treatment materials.

ZIF-8 as a pH-Responsive Nanoplatform for 5-Fluorouracil Delivery in the Chemotherapy of Oral Squamous Cell Carcinoma.

5-fluorouracil (5-FU), a chemotherapeutic agent against oral squamous cell carcinoma (OSCC), is limited by poor pharmacokinetics and toxicity. The pH-sensitive zeolite imidazolate framework-8 (ZIF-8) may increase the selectivity and length of 5-FU released into the acidic tumor microenvironment. This study examined the in vitro 5-FU absorption and release profiles of ZIF-8, and then progressed to cytotoxicity assays using the OSCC primary cell line SCC7. The 5-FU loading capacity of ZIF-8 was calculated with UV-vis spectroscopy (λ = 260 nm). 5-FU release was quantified by submerging 5-FU@ZIF-8 in pH 7.4 and 5.5 acetate buffer over 48 h. For the cytotoxicity assays, 5-FU, ZIF-8, and 5-FU@ZIF-8 were added to SCC7 cultures at 25, 50, and 100 µg/mL. Cell viability was assessed through toluidine blue staining and further quantified through transcriptomic RNA sequencing. ZIF-8 stabilized at a maximum absorption of 2.71 ± 0.22 mg 5-FU, and released 0.66 mg more 5-FU at pH 5.5 than 7.4 for at least 72 h. The cytotoxicity assays showed that 5-FU@ZIF-8 had a synergistic inhibitory effect at 50 µg/mL. The RNA sequencing analysis further revealed the molecular targets of 5-FU@ZIF-8 in SCC7. 5-FU@ZIF-8 may release 5-FU based on the pH of the surrounding microenvironments and synergistically inhibit OSCC.

New zeolite-based composite pads with high-volume blood absorption for early warning of postpartum hemorrhage.

Medical treatment of severe blood loss during labor is crucial, and the early warning indicator of postpartum hemorrhage (PPH) is essential for labor medical treatment. Measurement of blood loss conventionally looks dirty, reluctant, and less hygienic since some of the blood might be spilled out in the maternity bed, while commercially existing pads have low blood absorption capacity. A new design composite pad composed of absorbent materials, including cellulose rayon, super absorbent polymer (SAP), and zeolite was fabricated and characterized. The SAP and zeolite show properties as crystalline and amorphous materials, respectively. The surface area of natural zeolite was 19.79 (m2/g). The newly fabricated composite pad showed a high blood absorption capacity (>500-600 mL) with a blood absorption rate of 55.56-85.84 mL/min (depending on the blood volume), showing better performance as compared to the commercial pads. These characteristics suggest that the new composite pad could function not only as a sanitary pad but also as an early warning indicator for PPH if the rate and blood volume reach the dangerous category (≥600 mL or at ≥13 mL/min rate).

High speed enrichment of benzoylurea insecticides by hierarchical pore nitrogen doped carbon materials induced with hydrogen-bonded organic frameworks.

The high speed enrichment of benzoylurea insecticides (BUs) in complex matrices is an essential and challenging step. The present study focuses on the synthesis of a hierarchical pore nitrogen-doped carbon material for magnetic solid phase extraction (MSPE) of BUs. This material was prepared through the carbonization of a composite material ZIF-67@MCA which assembly with hydrogen-bonded organic frameworks (melamine-cyanurate, MCA) and zeolitic imidazolate framework (ZIF-67) at room temperature. The optimal adsorption effect is achieved when the mass ratio of ZIF-67 to MCA is 1/3, and the carbonization was performed at 600 °C, the such obtained carbon material was denoted as 1/3ZIF-67@MCA-DCs-600. The material was characterized with various physical methods including X-ray diffractometry (XRD), Fourier transform infrared spectrometry (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), water contact angle measurement, Raman spectrometry. 1/3ZIF-67@MCA-DCs-600 exhibits a macro-mesoporous 3D structure with a high degree of nitrogen doping and relatively large specific surface area, making it suitable for magnetic solid phase extraction (MSPE). The adsorption of BUs with concentration of 100 ng mL-1 can reach equilibrium within 5 s. The interaction between BUs and the adsorbent, facilitated by π-π stacking, hydrophobic interactions, hydrogen bonding forces, as well as the material's porosity, enables efficient extraction recoveries ranging from 45 % to 92 %. The enrichment of BUs was achieved through the establishment of an MSPE method under optimized conditions, which was further coupled with high performance liquid chromatography (HPLC) for the determination of the four BUs. The linear range spans from 5 ng ml-1 to 1000 ng ml-1 with the correlation coefficient (R2) of ≥ 0.99, Meanwhile, the detection limit for these four BUs falls within the range of 0.01 to 0.10 ng ml-1. The material exhibits good reusability and can be reused for at least 5 cycles. Inter day and intra-day precision ranges from 2.1-7.9 % and 1.0-5.4 %, respectively. The method demonstrates a high level of reliability in practical applications for the determination of BUs.

Developing a novel calcium silver zeolite for caries management.

OBJECTIVE: To develop a novel calcium silver zeolite (Ca-Ag-Zeo) and assess its biocompatibility, physiochemical properties and antimicrobial effects. METHODS: Ca-Ag-Zeo was synthesized using ion-exchange method with calcium chloride, silver nitrate and Zeolite X (Zeo). Silver zeolite X (Ag-Zeo) and Zeo were set as control. The chemical structure, morphology, crystal structure and elemental composition of Ca-Ag-Zeo was characterized by X-ray diffraction spectrum, scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy, respectively. Its biocompatibility on the human gingival fibroblasts was assessed by cell counting kit-8 assay. Its physiochemical properties were determined by the released calcium and silver ion using Inductive Coupled Plasma Emission Spectrometry for up to 12 weeks. The antimicrobial properties on Streptococcus mutans, Lactobacillus acidophilus, Lactobacillus casei, and Candida albicans were assessed by minimum bactericidal concentration (MBC) or minimum fungicidal concentration (MFC) assay. RESULTS: Ca-Ag-Zeo with a hexagonal cage structure was synthesized. As for biocompatibility, the half-maximal inhibitory concentration (± SD in mg/mL) of Ca-Ag-Zeo, Ag-Zeo and Zeo in human gingival fibroblasts were 0.52 ± 0.05, 0.15 ± 0.01 and 3.35 ± 0.58, respectively (Zeo > Ca-Ag-Zeo > Ag-Zeo; p < 0.05). As for physiochemical properties, the accumulated ion release (± SD in mg) of Ca-Ag-Zeo, Ag-Zeo and Zeo were 0.011 ± 0.003, 0 and 0 for calcium ion, respectively (Ca-Ag-Zeo > Ag-Zeo, Zeo; p < 0.001), and 0.213 ± 0.032, 0.209 ± 0.019 and 0 for silver ion, respectively (Ca-Ag-Zeo, Ag-Zeo > Zeo; p < 0.001). As for anti-microbial ability, the MBC/MFC (mg/mL) of Ca-Ag-Zeo, Ag-Zeo and Zeo were 32, 16 and > 256 against Streptococcus mutans; 32, 16, > 256 against Lactobacillus acidophilus; 16, 16, and 256 against Lactobacillus casei; 0.25, 0.125; and 2, 1, > 256 against Candida albicans, respectively. CONCLUSION: A novel Ca-Ag-Zeo was developed. It presented better biocompatibility compared to Ag-Zeo. It released calcium and silver ions sustainably, and it could inhibit the growth of common cariogenic microorganisms.

Synthesis of novel composite material with spent coffee ground biochar and steel slag zeolite for enhanced dye and phosphate removal.

Rising concerns over water scarcity, driven by industrialization and urbanization, necessitate the need for innovative solutions for wastewater treatment. This study focuses on developing an eco-friendly and cost-effective biochar-zeolite composite (BZC) adsorbent using waste materials-spent coffee ground biochar (CGB) and steel slag zeolite (SSZ). Initially, the biochar was prepared from spent coffee ground, and zeolite was prepared from steel slag; their co-pyrolysis resulted in novel adsorbent material. Later, the physicochemical characteristics of the BZC were examined, which showed irregular structure and well-defined pores. Dye removal studies were conducted, which indicate that BZC adsorption reach equilibrium in 2 h, exhibiting 95% removal efficiency compared to biochar (43.33%) and zeolite (74.58%). Moreover, the removal efficiencies of the novel BZC composite toward dyes methyl orange (MO) and crystal violet (CV) were found to be 97% and 99.53%, respectively. The kinetic studies performed with the dyes and phosphate with an adsorbent dosage of 0.5 g L-1 suggest a pseudo-second-order model. Additionally, the reusability study of BZC proves to be effective through multiple adsorption and regeneration cycles. Initially, the phosphate removal remains high but eventually decreases from 92% to 70% in the third regeneration cycle, highlighting the robustness of the BZC. In conclusion, this study introduces a promising, cost-effective novel BZC adsorbent derived from waste materials as a sustainable solution for wastewater treatment. Emphasizing efficiency, reusability, and potential contributions to environmentally conscious water treatment, the findings highlight the composite's significance in addressing key challenges for the removal of toxic pollutants from the aqueous solutions. PRACTITIONER POINTS: A novel biochar-zeolite composite (BZC) material has been synthesized. Excellent removal of dyes by BZC (~95%) was achieved as compared to their counterparts The kinetic studies performed suggest a pseudo-second-order model. BZC proves to be highly effective for multiple adsorption studies. Excellent reusability showed potential as a robust adsorbent.

Multifunctional EGCG@ZIF-8 Nanoplatform with Photodynamic Therapy/Chemodynamic Therapy Antibacterial Properties Promotes Infected Wound Healing.

Damaged skin is susceptible to invasion by harmful microorganisms, especially Staphylococcus aureus and Escherichia coli, which can delay healing. Epigallocatechin-3-gallate (EGCG) is a natural compound known for effectively promoting wound healing and its potent anti-inflammatory effects. However, its application is limited due to its susceptibility to oxidation and isomerization, which alter its structure. The use of zeolitic imidazolate framework-8 (ZIF-8) can effectively tackle these issues. This study introduces an oxygen (O2) and hydrogen peroxide (H2O2) self-supplying ZIF-8 nanoplatform designed to enhance the bioavailability of EGCG, combining photodynamic therapy (PDT) and chemodynamic therapy (CDT) to improve antibacterial properties and ultimately accelerate wound healing. For this purpose, EGCG and indocyanine green (ICG), a photosensitizer, were successively integrated into a ZIF-8, and coated with bovine serum albumin (BSA) to enhance biocompatibility. The outer layer of this construct was further modified with manganese dioxide (MnO2) to promote CDT and calcium peroxide (CaO2) to supply H2O2 and O2, resulting in the final nanoplatform EGCG-ICG@ZIF-8/BSA-MnO2/CaO2 (EIZBMC). In in vitro experiments under 808 nm laser, EIZBMC exhibited synergistic antibacterial effects through PDT and CDT. This combination effectively released reactive oxygen species (ROS), which mediated oxidative stress to inhibit the bacteria. Subsequently, in a murine model of wound infection, EIZBMC not only exerted antibacterial effects through PDT and CDT but also alleviated the inflammatory condition and promoted the regeneration of collagen fibers, which led to accelerated wound healing. Overall, this research presents a promising approach to enhancing the therapeutic efficacy of EGCG by leveraging the synergistic antibacterial effects of PDT and CDT. This multifunctional nanoplatform maximizes EGCG's anti-inflammatory properties, offering a potent solution for promoting infected wound healing.

Synergistic Procoagulant Mechanism and Application of Kaolin-Zeolite Composite Hemostat for Effective Hemorrhage Control.

Achieving timely and effective hemorrhage control is imperative for the survival of individuals with severe bleeding. Hemostatic materials, by enhancing the natural cell-based coagulation response, are essential tools in modern and military medical practice for controlling bleeding, especially in emergency and surgical settings. Here, we report a new type of composite hemostatic material with two different aluminosilicate-based components, kaolin and zeolite, which synergistically work together in different stages of the coagulation cascade reactions. Kaolin can effectively activate the clotting factor FXII in the early stage, and zeolite can accumulate and assemble FXa and FVa on its surface and thereafter lead to the formation of highly active thrombin in the later stage. The synergistic action mechanism between kaolin and zeolite significantly boosts the levels of FXIIa and FXa, and it also greatly enhances plateau thrombin activity. For practical application, a kaolin-modified zeolite gauze is fabricated, and it demonstrates excellent hemostatic effectiveness. Compared to the combat gauze currently used in front-line treatment, it reduces blood loss by 75% and shortens hemostasis time by 33% in a rabbit femoral artery injury model. In addition, this kaolin-zeolite gauze has no heat release problem and a nearly zero particle shedding rate, which greatly decreases the safety risk compared to current commercial inorganic-based hemostatic gauzes.

Noble metal-free plasmonic Cu/WO3-x@ZNC bi-functional composite for ciprofloxacin photocatalytic degradation and photothermal water evaporation via visible-infrared exposure.

Herein, coupling of noble metal-free plasmonic copper nanoparticles with tungsten suboxide and supporting on zeolite nanoclay (Cu/WO3-x@ZNC) composite will be introduced for bi-functional photocatalytic ciprofloxacin (CIP) degradation and water photothermal evaporation under visible/infrared (Vis/IR) exposure. Reduced band-gap of WO3-x via oxygen vacancies creation and localized surface plasmon resonance (LSPR) formation by Cu nanoparticles contributed significantly the extension and intensification of composite's photo-absorption range. Furthermore, small mesoporous structure of ZNC enhanced CIP adsorption and charge carriers separation where the reported photocatalytic efficiencies were 88.3 and 81.7% upon IR and Vis light exposure respectively. It was evidenced that plasmonic hot electrons (e-.s) and hydroxyl radicals (OH•-) performed the basic functions of the photocatalytic process. At the other side, oxygen vacancies existence, plasmonic effect, and confining thermal characteristics of WO3-x, Cu, and ZNC correspondingly induced water photothermal evaporation with efficiencies up to 97.5 and 72.8% under IR and Vis illumination respectively. This work introduces synthesis of a novel bi-functional photocatalytic-photothermal composite by metal sub-oxide and non-noble metal plasmonic coupling and supporting on naturally-derived carrier for water restoration under broad spectral exposure.

Functional Ginger-Derived Extracellular Vesicles-Coated ZIF-8 Containing TNF-α siRNA for Ulcerative Colitis Therapy by Modulating Gut Microbiota.

Tumor necrosis factor-α (TNF-α) plays a causal role in the pathogenesis of ulcerative colitis (UC), and anti-TNF-α siRNA shows great promise in UC therapy. However, delivering siRNA with site-targeted stability and therapeutic efficacy is still challenging due to the complex and dynamic intestinal microenvironment. Here, based on the functional plant-derived ginger extracellular vesicles (EVs) and porous ZIF-8 nanoparticles, we propose a novel TNF-α siRNA delivery strategy (EVs@ZIF-8@siRNA) for UC targeted therapy. Ginger EVs show strong colon and macrophage targeting, as well as robust resistance to acidic degradation in the stomach. Moreover, 6-shogaol in ginger-derived EVs displays anti-inflammatory effects, which enhance the treatment efficiency by cooperation with TNF-α siRNA. In vitro experiments reveal that ZIF-8 nanoparticles have high TNF-α siRNA loading capacity and promote siRNA escape from cellular lysosomes. In vivo experiments show that the TNF-α level is reduced more significantly in colonic tissue than other nontargeted inflammation related factors, showing a good targeting of this composite nanoparticle. Furthermore, gut microbiota sequencing results demonstrate that the nanoparticles can promote intestinal barrier repair by regulating the intestinal microbial balance and restoring the intestinal health of UC mice. Therefore, the developed EVs@ZIF-8@siRNA nanoparticles may represent a novel colon-targeted oral drug, providing a promising therapeutic strategy for UC therapy.

Efficient adsorptive separation of Cu(II) from Ph by ZIF-8 constructed with sodium alginate polymer backbone.

With the rapid development of industrialization, the removal of heavy metal ions and small organic molecules from wastewater has triggered a hot debate. ZIF-8 was grown on a sodium alginate backbone using an in situ growth technique, the core-shell P-SMG@ZIF-8 was synthesized. It was also characterized by FTIR, XRD, SEM, UV-Vis and XPS, and the optimal conditions and mechanism of adsorption were explored. At pH 2.0, a contact time of 200 min, and 298 K, removal of Cu(II) and Ph up to 80.2 %, 65.6 % by P-SMG@ZIF-8, adsorption behavior consistent with Langmuir model for pseudo-secondary rates, the saturated adsorption of Cu(II) and Ph could reach up to 83.5812 mg/g and 78.1779 mg/g, respectively. And the adsorbed P-SMG@ZIF-8 is easy to separate and reusable, which is a cost-effective and efficient natural product-based adsorption material.

Silver decorated zeolite embedded in bionanocomposite hydrogels based on cross-linked carboxymethyl cellulose for excellent catalytic hydrogenation of azo dyes.

Herein, bionanocomposite beads based on Carboxymethyl cellulose/Dextrant sulfate (CMC/DS) embedding silver nanoparticle-functionalized zeolite (AgZ) were developed and proposed as catalysts for catalytic hydrogenation of Direct Red 16 (DR16) azo dye under different experimental parameters. The obtained results showed that AgZ incorporation into the polymer matrix produced highly porous structures with improved thermal stability. For antibacterial application, it was shown that the engineered bionanocomposites were effective against all tested bacteria. The CMC-DS-AgZ catalysts showed good catalytic performances for the hydrogenation of DR16 in various real-life water samples and even in presence of several mineral salts, however with a high efficiency (99 %) obtained for the catalyst prepared at elevated AgZ content (with a kapp rate constant of 0.239 min-1). Moreover, the hydrogenation study of various azo dyes highlighted the satisfactory application potential of the catalysts and their versatility. The catalyst beads showed good recyclability for five successive cycles without any significant loss of efficiency or stability. The proposed mechanism for DR16 catalytic hydrogenation on C3-D1-AgZ revealed that AgZ could enhance the catalytic activity of the beads by facilitating the formation of AgH intermediates. Finally, the green synthesized materials were shown to be viable and potential candidates for the purification of environmental media.

Coamplified Nanozyme Cocktails for Cascade Reaction-Driven Antioxidant Treatments.

Antioxidant nanozymes are powerful tools to combat oxidative stress, which can be further improved by applying nanozyme mixtures of multiple enzymatic function. Here, cocktails of Prussian blue (PB) nanocubes and copper(II) exchanged ZSM-5 zeolites (CuZ) with enhanced reactive oxygen species (ROS) scavenging activity were developed. Surface functionalization of the particles was performed using polymers to obtain stable colloids, i.e., resistant to aggregation, under a wide range of experimental conditions. The nanozyme cocktails possessed advanced antioxidant properties with multiple enzyme-like functions, catalyzing the decomposition of ROS in cascade reactions. The activity of the mixture far exceeded that of the individual particles, particularly in the peroxidase assay, where an improvement of more than an order of magnitude was observed, pointing to coamplification of the enzymatic activity. In addition, it was revealed that the copper(II) site in the CuZ plays an important role in the decomposition of both superoxide radicals and hydrogen peroxide, as it directly catalyzes the former reaction and acts as cocatalyst in the latter process by boosting the peroxidase activity of the PB nanozyme. The results give important insights into the design of synergistic particle mixtures for the broad-spectrum scavenging of ROS to develop efficient tools for antioxidant treatments in both medical therapies and industrial manufacturing processes.

Sulfonated-polypyrene aniline/polyaniline composite fortified with Cu-GQD@ZIF8 as an electrochemical enzymatic urea biosensor.

The determination of urea concentration is essential for human health owing to its crucial role in the ability to metabolize nitrogen-containing substances. This study developed new electrochemical enzymatic detection systems via the synergistic effect of the superior features of novel electropolymerizable pyranine-aniline (PA, 4), polyaniline (PANI) compounds, graphene quantum dots (GQDs) and zeolitic imidazolate framework-8 (ZIF8). The novel compound 4 was characterized via1H-NMR, 13C-NMR, FTIR, and MALDI-TOF mass spectroscopies. Furthermore, Cu-GQD@ZIF8 hybrid materials containing GQD and integrated electroactive Cu metal were prepared in this study. The surface morphology of the prepared Cu-GQD@ZIF8 hybrid material was investigated through microscopic methods such as SEM and TEM, and chemical characterizations were performed using FTIR, XPS, XRD, and TGA analyses. After the characterization of the novel materials, the urease (Urs) enzyme was bound to the new modified electrode surface. Next, the enzymatic biosensor properties of the Urs/Cu-GQD@ZIF8/PANI/PA/GCE sensor electrode for urea detection via reduction of PANI were investigated by DPV and CV techniques. The LOD and LOQ values of the presented sensor were calculated to be 0.77 µM and 2.31 µM, respectively, in the linear range of 1.0-80.0 µM, based on DPV measurements. The presented biosensor system determined the amount of urea in an artificial serum sample, and its accuracy was confirmed via the recovery test and GC-MS analysis.